Blogs/News/PSAs

The technological advancement and rapid replacement of electrical equipment have a direct impact on the stable operation of power systems and electricity prices. In particular, the technological progress of new energy equipment directly promotes the rapid decline in the cost of installed power systems.

At present, there are more than 250 electrical equipment corp listed in the Mainland, Hong Kong, and the United States, including traditional electrical companies, as well as new energy companies such as energy storage and photovoltaics. At the end of April 2020, all listed companies announced their 2019 financial statements. According to relevant financial statistics and analysis, Energy magazine released the list of Top 20 Listed Electrical Equipment Companies in 2020. The following are the features.

1. Among the companies on the list, the valuation of leading new technology companies is relatively high

Market valuation often represents the company's future development potential. It is not difficult to find from the list that the market value of traditional electrical equipment enterprises such as Shanghai Electric, Dongfang Electric, Harbin Electric, and others are lower than the revenue level, and the price-earnings ratio is obviously low. The market value of CATL (energy storage), LONGI shares (photovoltaic), and NARI (power intelligentization and digitization), which represent new technologies and new directions, are far higher than revenue.

2. The revenue scale of the listed companies is generally small

As an integral part of the power industry, the electrical equipment industry has a relatively small overall scale. Among the top 20 listed companies in the electrical equipment sector, only Shanghai Electric has a revenue of more than 100 billion. Except for Shanghai Electric, the top 10 companies have revenues of less than 50 billion yuan, and nearly half of the listed companies have revenues of less than 20 billion yuan.

3. The valuation of electrical equipment supply companylisted in Hong Kong is generally low

Among the top 20 companies listed this year, three companies are listed on the Hong Kong Stock Exchange, namely Harbin Electric, Jiangnan Group, and CHNENERGY Technology & Environment Group. From the perspective of operating income, the three companies are all over 10 billion, but due to poor profitability, the valuation given by the Hong Kong market is low.

4. Most of the listed companies are mainly engaged in the new energy business

Most of the top 20 listed companies are mainly engaged in or involved in new energy businesses such as wind power, photovoltaics, and energy storage. Among them, CATL, LONGI shares, and Goldwind Technology are leading companies in power batteries, photovoltaics, and wind power respectively. This also highlights the rise and rapid growth of China's new energy industry in recent years.

5. CATL has become a fast-growing company

Among the companies on the list, the operating performance of the CATL is very outstanding. In the past five years, the overall operating income and net profit have maintained year-on-year growth. It is a typical high-growth leading company. The market has also given extremely high valuations.

[Aquarius] Garnet: "Garnet" evolved from the Latin "Granatum", meaning "like a seed". It symbolizes loyalty, friendship, and chastity.

[Pisces] Amethyst: "Amethyst" is derived from the Greek "amethystos", meaning "not drunk". It symbolizes that the body is like jade, clean, and undyed.

[Aries] Bloodstone skull: Also known as "Heliotrope" in English, meaning "sunward plant".

[Taurus] Sapphire: Sapphire is one of the five gemstones. It is ranked third after diamonds and rubies. It symbolizes loyalty, perseverance, love, and honesty.

[Gemini] Agate: Onyx was discovered by ancient Greek philosopher and natural scientist Teoflastos along the Achates River in Sicily, so the name was formed. Agate is one of the seven treasures of Buddhism. It has been used as an evil spirit and amulet since ancient times, symbolizing friendly love and hope.

[Cancer] Emerald: "Emerald" evolved from the Latin "Esmaralda / Esmaraldus", which means "green" in Hebrew. It represents eternal youth and spiritual stability.

[Leo] Onyx: "Onyx" is derived from the Latin "onyx", which means "paw" and "fingernail".

[Virgo] Carnelian: Agate, "Carnelian" comes from the Latin "caro", meaning "meat".

[Libra] Peridot: The etymology of "Peridot" is unknown. It symbolizes beautiful wishes such as peace, happiness, and serenity. In the wars between ancient tribes, peace was often expressed by giving olivines to each other.

[Scorpio] Beryl: Emerald, "Beryl" is derived from the Greek "beryllos", which means "blue-green stones like sea-colored".

[Sagittarius] Topaz: English name may be derived from Zabajad Island in the Red Sea. The island was formerly known as "Topazios", which means "difficult to find" because the island is often shrouded in the fog And named. There are also some authoritative figures who believe that it is derived from Sanskrit Topas (meaning 'fire'). Yellow is one of the three basic colors. People believe that "yellow" symbolizes peace and friendship, so Topaz has become "the stone of friendship."

[Capricorn] Ruby: "Ruby" means "red" in Latin. Some ancient books believe that ruby is "the most precious of the twelve kinds of gems created when God created everything. Ruby is regarded as a symbol of" love "," enthusiasm "," noble character "and" brilliance ".

①.Don't use in aorta.

②.Don't use in blood-starved or necrotic tissue .

③.Don't re-use.

Endoscopic Linear Cutter Reload Features & Benefits

①.Reinforced and one-piece I-beam design

②.The staple height reaches up to 5.0mm for green reload

Ensure suturing extra-thick tissue to effectively prevent the staples opening by extra-thick tissue.

③.Different staple heights from inner to outer rows

Adapt to different tissue thickness. Excellent hemostatic effect to provide optimal blood supply.

④.Extra-thin reinforced And one-piece anvil

Endoscopic linear cutter reloads ensure stable performance during firing, optimal staple formation to be easier passing the Narrow tissue gap with the extra-thinanvi.

⑤.Enhanced compression space control system

• Control consistently the parallel clamping force.

• Reduce tissue damage in second time closure.

• Control effectively the space between reload and anvil Ensure optimal B-sharp.

Anal Hemorrhoid Ligation Instrument

The single use hemorrhoid band ligation device (hereinafter referred to as the "ligation device") can be classified into 4 specifications according to the number of ferrules placed in the head section:

How many times have you recorded a video of a special moment only to discover that it’s a shaky mess when you play it back? A gimbal stabilizer is a great way to create a smooth and steady video but its size makes it somewhat cumbersome to carry around the whole time. This is where Zhiyun’s all-new Smooth-X Gimbal Stabilizer comes to the rescue with its ability to fold up into a compact, pocket-sized device. Best of all, you can pick up the foldable Smooth-X Gimbal Stabilizer from Amazon for just $42 using the 30% discount code we’ve got for you after the break.

Besides being of pocket-size when folded-up, the Smooth-X Gimbal also acts as an extendable selfie-stick (up to 10.2-inches) and features face and object tracking functionality. You can switch between portrait and landscape recording with the press of a button, and the ZY Cami app (Play Store Link) handily includes creative filmmaking templates as well as slow-motion, time-lapse, and panorama functions.

Zhiyun’s new Smooth-X Gimbal Stabilizer has an RRP of $59.99, but you save 30% by entering the discount code SXLJ3002 at checkout to reduce the price down to just $41.99.

Buy it Now: Amazon

[Guide] How to schedule tweets on Twitter’s web-app

All the details on the Google Pixel 4a: specs, pricing, release date, and more

Netflix now lets you remove titles from your Continue Watching section: here’s how

The claim that crystal can cure a disease actually has a scientific basis. First of all, the crystal has a strong ability to condense and emit light. When it stimulates a certain acupuncture point of the human body, it can have a certain physiotherapy effect; in addition, if the crystal is worn for a long time, it contains microelements beneficial to the human body, which will also gradually penetrate into the human body and produce a good coordination effect on the human body; of course, the energy carried by the commonly-known crystal will also generate a magnetic field in contact with the skin to balance the body and mind. So, what kind of disease can a crystal cure? In fact, crystals are not only crystals but also include various gems of the crystal type. They have a different emphasis on various diseases of the human body.

Sub-health

Sub-health is not actually a disease, but long-term sub-health is very dangerous. Especially in modern society, many friends have been in this state for a long time, which is very bad, and it is easy to have severe illness or sudden death. For this, the suitable crystals are white crystals, tourmaline, and tea crystals, which can help you restore physical strength and maintain a healthy state.

“Three-high”

For the “three-high” people, if you can wear obsidian, black tourmaline, or blue aquamarine, lapis lazuli, it is very beneficial.

Indigestion

For friends with indigestion, it is very good to wear some citrine, copper crystal, amber yellow gem.

Hypotension, endocrine disorders

If you have problems with low blood pressure and endocrine disorders, it is recommended to wear some rubies such as red agate, garnet, and rubellite, which will have a good improvement effect.

Chest tightness

If it's chest tightness, things like green ghost, green tourmaline, aventurine, peridot, agarwood, and amber are more suitable.

Skin diseases, allergies

If you have a skin disease or allergy symptoms, it is recommended to wear some amethyst, peridot, green ghost, and white crystal, which will have a good improvement effect.

Obesity

If you want to lose weight, tea crystal, blond crystal, moonstone, and feldspar will bring you some surprises.

Arthritis

For friends with arthritis, the effects brought by citrine, obsidian, and tourmaline will be very good.

We provide cheap crystals, if you want to buy crystal stones. please contact us in time.

Let us rejoice in the Lord as He rejoices in us. The Lord thy God in the midst of thee is mighty; He will save, He will rejoice over thee with joy; He will rest in His love, He will joy over thee with singing (Zephaniah 3:17).

The single use circumcision stapler(hereinafter referred to as the "circumcision stapler"), there are two models of VMBQA and VMBQB according to the product shape, and each model is including 9 specifications.

The contraindication of circumcision stapler surgery:

① Patients with deformed prepuce and glans (including those with extensively and closely adherent prepuce and glans).

② Patients with prepuce and glans infection or edema.

③ Patients with penile cancer

④ Patients with systemic diseases (such as bleeding tendency, hypoproteinemia and severe cardiovascular diseases) and mental diseases, etc.

⑤ Caution use for those patients with scar diathesis.

Circular Stapler

The Single Use Circular Stapler places a circular, double staggered row of titanium staples when it is activated. Immediately after staple formation, the circular knife blade resects the excess tissue and creates a circular anastomosis. Do you want to know the circular stapler price，please contact us.

In the past, the application of electronic modules to automobiles was relatively simple. Today, a new form of technology is emerging. Vehicle systems are connected to sophisticated electronic devices that drive modularity. With the increase in cabin systems, human-machine interfaces, radars, and cameras, the number of multi-interface printed circuit boards (PCBs) and flexible components is also increasing. These components require connector products to enhance signal integrity and ensure transmission speeds in harsh environments.

The latest trend in the market is the integration of connected sensors, and the need for interconnection has created huge business opportunities for suppliers.

Trend 1: Human Machine Interface (HMI) connection

More and more applications use interfaces for communication, and most user interfaces have flexible board-to-board (F-to-B) connection points that require flexible printed circuit boards or board-to-board connectors.

The demand for sensors, microphones, speakers, and cameras is driving increased modularity, which requires more and better flexible printed circuits (FPCs), flexible flat cables (FFCs), board-to-board, and wire-to-board signal connections.

Trend 2: Durability requirements for harsh environments

Flexible components and printed circuit boards are becoming more complex. Harsh environments require higher signal integrity and more stable retention characteristics to withstand shocks and vibrations, which requires more and better flexible printed circuits (FPC), flexible flat cables (FFC), board-to-board and wires Signal connection to the board.

Consider the need for high-performance, durable interconnects early in the development process.

Trend 3: Limited space requires design flexibility

Automotive applications are getting smaller and smaller. The increased modularity limits the space between the connector and other components, requiring more space-matched miniature connector products.

Miniature connectors with multiple contact surfaces and orientations address the design challenges presented by designers with space, location, and connector entry points.

Vehicle electronics now require higher speeds and signal integrity to transmit higher bit-rate data streams.

The key to success in this area is a high-speed solution that supports the signal integrity (SI) required for sensor, camera, human-machine interface, and system communication.

Sunkye is a professional mil spec military connector manufacturer and supplier, if you are looking for automotive power connectors, contact us now.

D-sub connectors are bulky and durable, which made them suitable for being applied in harsh environments where durability is extremely important. They can also be compatible with many old-fashioned devices. For these advantages, D-sub is widely used in factories, manufacturing workshops and industrial environments.

If you want to take mobile creation to the next level, adding a gimbal can help ramp up your production quality. And with the new ZHIYUN Smooth-X, it doesn’t even cost very much. Starting at just $59.99, this mashup between a two-axis gimbal and a selfie stick is an affordable way to up your mobile game. Head below to see the video and check it out in action.

Portable design

As a mobile-focused gimbal, the Smooth-X is small and portable. Zhiyun has plenty of other larger systems, but this is meant to be easy to stuff in a pocket, bag, or the optional protetcive case by folding it down and locking it into a solid position. The standard package comes with just the gimbal for $59.99, but for $10 more, you can also pick up the handy tripod and a carry case for everything.

At its core, the Smooth-X is a two-axis gimbal mashed up with a selfie stick. It’s pretty slick. The handle extends up to 260mm and the gimbal can rotate to get the best angle for your shot. By connecting via Bluetooth to a mobile device, the controls on the Smooth-X make it easy to start recording.

All of the control buttons are on the handle to help use your phone on the gimbal. On the left is a mode button that will toggle between a follow mode that turns the camera when you turn and a stabilized mode that will keep its direction no matter how you turn the gimbal. A double press will move the camera from landscape to portrait mode.

The four-way button can be used to pan the camera and adjust the angle. And lastly, there is a record button to make starting videos and taking photos easy without pressing any buttons on your device.

Setting up the Smooth-X

Getting the Smooth-X unpacked and set up for the first time wasn’t intuitive, but once I got used to the steps it was simple and makes sense. To get started, first you unlock the handle by turning it 90 degrees, then bend the angle of the handle out a bit. With that angle, the handle can then rotate past the phone clip and lock into place.

With the handle set up, then you can mount a phone into the holder. Just use your hand to pry apart the spring-loaded grip and place your phone between them. I tried to get the phone as close to the middle as possible without pressing any side buttons.

One of the things that make the Smooth-X so user friendly is that you also don’t need to calibrate anything. Once the phone is mounted, you can turn it on a get some smooth video.

ZY Cami app

To take full advantage of the controls on the Smooth-X, though, the ZV Cami App is needed. After making an account, you can connect the Smooth-X. While controlling the Smooth-X from the app, you can use the buttons located on the handle. These let you change mode, start and stop recordings or take photos, zoom and pan, and rotate the phone.

There are also complete controls for editing videos within the ZV Cami App, if you want to take advantage of those. I haven’t spent much time editing in there.

Smooth-X: easy and intuitive

With the gimbal and app all set up, using the Smooth-X is very easy and intuitive. While you can only do it in one direction, the gimbal will keep its orientation as you transition from holding it upwards or down. Folding and repositioning the gimbal makes it easy to get the angle you want.

For some added control, you can also enable gesture tracking in the ZY Cami app. With this enabled, just make a V gesture and the phone will start recording a video and track to keep you in the frame. This is a great feature for creators who don’t always have someone around to help shoot.

Battery life

With the internal battery and USB-C charging port, you can expect to get 3-4 hours of run time before the Smooth-X will need more juice.

9to5Toys’ Take

Overall, I’m pretty surprised by how affordable the Smooth-X is. Of course, it’s only a two-axis gimbal so it won’t be as smooth as three-axis systems. But that makes it incredibly portable, and the features built into this selfie-stick gimbal mashup are impressive for the $60 starting price. Everything feels solidly built so far, and the ZY Cami App is powerful and easy to use.

Buy Zhiyun Smooth-X

https://youtu.be/PXt-WnVBRPw

https://youtu.be/NPO-OcZu5Po

To good news again, Indian customers to visit our company!

To good news again, Indian customers to visit our company, and long-term cooperation agreement with our company.

From TERAMAX INDIA PVT., LTD. Company Yurak Chsadhery to come to my company on-the-spot investigation, four days, the teramax sales manager and engineer received them. With our products, we provide the respectively introduces the technical principle and production process, at the same time to visit our workshop and laboratory. They are satisfied with our products, services,and so on. Specially, they signed a cooperation agreement with our company. The move to develop the India market we have great significance in the construction.

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.

Crystal is one of the most powerful gemstones on earth, ideal for healing, improving mental abilities, meditation, lucid dreaming, enhancing imagination, and opening the third eye.

Crystals are all over the world. There are three main mining areas in the world: Brazil, Madagascar, and Mount Ida in Arkansas. Edgar Casey speculates that Atlantis is located near Binimi, if his guess is correct, and we assume that Atlantis uses crystal technology, then we can speculate that these crystals are most likely found in Arkansas, of course, there are rumors that they may come from another planet.

Some crystals contain impurities such as stripes, blisters, cracks, metal particles, halo, and mist. Many spiritual masters and therapists believe that this type of impurities actually enhances the supernatural properties of crystals, so please do not treat them as defective.

From the perspective of supernatural abilities, crystal represents a collection of five elements: earth, gas, fire, water, and ether.

Crystals grow deep in the earth, and most of them are formed in the earth's crust, but crystals, like the gas element, allow light to pass through. Crystals are piezoelectric, and their hexagonal molecular structure-similar to snowflakes looks like ice crystals. Crystal is a concrete manifestation of etheric elements or spiritual elements, which is equivalent to the cosmic vitality energy that maintains the basic energy of all known forms of energy in the universe.

Each crystal is unique. Just like when buying jewelry, it is important to choose the crystal that suits you or attracts you.

If you use crystals for healing, you will transfer the crystal's energy into the recipient's body by holding the recipient's hand. If you are using a double-tip crystal, you can use both ends of the crystal to channel this energy. Your crystal will activate and amplify its vitality, and transmit this energy to the object you give.

According to Dr. Richard Gerber, author of Vibration Medical Practice Guide: Energy Healing and Spiritual Transformation, "In any case, if a properly cut crystal is used, the healer will use the crystal as a surgeon removes the tumor. Release the negative energy in the body and restore the body to a complete state. "

"An interesting phenomenon can be found on the material basis of crystals. Humans are living crystals to some extent. Some aspects of human energy systems have the same transformation characteristics as natural crystals."

"When we use natural crystals for healing, the energy transfer occurs partly due to the resonance effect between the crystal and the crystal system of the cell that is common to the crystal."

"Two identical biological crystal elements amplify a certain aspect of vitality in a special energy circuit running throughout the body. The biological crystal system is a medium that can efficiently input high-frequency energy into the body."

where to find natural crystals?

We have geodes carved into skulls for sale, crystal geode skull for sale, stone skulls for sale and mini skulls for sale, If you need, please contact us in time.

The Single Use Circular Staplers places a circular, double staggered row of titanium staples when it is activated. Immediately after staple formation, the circular knife blade resects the excess tissue and creates a circular anastomosis. The circular stapler uses is very wide.

①Do not use the Single Use Circular Stapler on any tissue that will be compressed to less than 1mm in thickness as the staples will not be tight enough to ensure hemostasis.

②Do not use the disposable circular stapler on any tissue which cannot be compressed comfortably to 2.0mm for 21 mm and 23mm, 2.3mm for 25mm and 27mm, 2.5mm for 29mm, 31 mm and 33mm in thickness. Overly thick inverted tissue could be crushed when the instrument is closed. Failure to do it may result in poor heeding, or narrowing of the anastomosis.

③The circular stapler uses should not be used if the instrument is too large for the diameter of the structure, which could be stretched or thinned out by introducing the instrument. Failure to that leakage and narrowing of the anastomosis could occur.

④Do not use the Single Use Circular Stapler unless sufficient tissue presents and allows proper inversion of tissue edges, so that staples may be placed securely.

⑤Do not use the disposable circular stapler unless adequacy of hemostasis can be visually verified after firing.

The junction boxes and connectors of photovoltaic modules are small parts that are not noticeable. However, if the quality of these two widgets is not high enough, it will be a huge safety hazard! At present, there should be too many fires in the country due to overheating of connectors, causing huge losses to power stations.

Previously, a well-known foreign agency Fraunhofer ISE and TÜV jointly investigated the fire causes of photovoltaic systems and found that the first and third fire causes were related to the connector.

Failure analysis caused by metal parts

The metal part is the main body of the connector and the most important flow path. When operating in various environments, stable resistance is a prerequisite to ensure the normal operation of the connector.

1. Failure analysis of resistor Rco

The resistance Rco is the resistance of the overlapped part of the metal part after the connector is mated. If Rco increases abnormally, it will cause the temperature to rise, which will cause a fire in the middle of the connector.

2. Failure analysis of resistor Rcr

The crimping resistance Rcr is mainly related to the crimping quality and crimping process. We can judge the quality of the crimp by the compression ratio and crimp section. Good crimping requires a tight profile without gaps and a regular shape. For commonly used 4mm2 cable crimping and contact resistance at the crimping point, the standard IEC2742 / 05 also puts forward the requirement of less than 0.2mΩ, while IEC60352-2 stipulates that the pull-out force of the crimping end must be greater than 310N.

Failure analysis due to sealing performance

Because the connector is outdoors, it has strict requirements for sealing performance.

For example, some connectors have IP65 and IP68 protection levels. Because the connector is mated to the cable, when it comes to tightness, the choice of cable becomes very important. In general, different connector models correspond to different cable outer diameters, and the purpose is to ensure sealing performance.

For example, the MC4 connector can match photovoltaic cables with an outer diameter of 3-9mm (conductor cross-sectional area of 1.5-10mm2), but its corresponding models are up to 6 types. In order to verify the matching of the cables, after the connectors are assembled, relevant tests are performed, such as IP tests, wet insulation tests, and withstand voltage tests.

Failure analysis caused by insulation materials

The choice of insulation material directly determines the quality of the connector. A good connector needs to choose the right insulating material, and whether it is suitable is mainly determined by the requirements of the connector, such as weather resistance, heat resistance, flame retardancy, mechanical properties, and insulation properties of the material. Photovoltaic connector insulation The choice of material is the result of comprehensive consideration of these several properties. Choosing the right material can reduce the probability of misfire under high temperature rise.

In addition, it is not possible to use regrind for photovoltaic connectors. The reason for this is because the use of regrind has its extremely strict regulations and product inspection measures. Only in this way can it ensure that the performance of its products does not drop much. The photovoltaic connector is required to be used for more than 25 years in many clients, which means that it has very high requirements for materials.

Although the use of recycled materials can reduce product costs, it increases the probability of product failure at the end of use, so connector manufacturers should eliminate them.

To sum up

Photovoltaic connectors account for a relatively low cost in photovoltaic power plants, but they are a key component. In the early stage of power station construction, the risk of failure caused by the connector is often not taken seriously, but in the later stage it will become a pain point for the operation and maintenance of the power station.

The operation and maintenance costs caused by the failure of the connector include the loss of power generation revenue, the cost of spare parts, labor costs, and safety risks. These operation and maintenance costs will ultimately affect the investment return of the power station. Photovoltaic connectors provided by suppliers with reliable quality and rich experience in production and assembly are one of the foundations to ensure the normal and stable operation of photovoltaic power stations, and the normal operation of power stations is one of the prerequisites to ensure the owners' maximum benefits.

Sunkye is a qualified mil spec military connector manufacturer and supplier, who support custom connectors for a complete range of high-performance applications. A wide variety of military connector options are available to you, feel free to contact us.

Mil spec connector, also called military grade connector or military style connector or military standard connector or military power connector, has been developed to satisfy the market requirements for ultra-tiny size, high performance, great quality, and top qualified customized connector. Sunkye mil grade connector is widely applied for the board to board, system to system, application to application, equipment to equipment. Specially designed for extreme environments like the defense industry, but our mil spec connectors can also be used in a variety of commercial tasks. Our automotive terminal connectors can withstand the harsh conditions of the road and off-road transportation. The combination of Sunkye's mil grade connectors provides reliable solutions for improving the connectivity of critical systems.

The ZHIYUN Smooth-X can have you do a lot with a mobile phone. It also folds up so it can fit into any bag and the hardware and Bluetooth-connected app works together seamlessly.

More Than a Selfie Stick

The gimbal's extension ability is something no other gimbal offers as an included part of the device. Other brands have it as accessories that you have to add to the basket. And, because of this extendable camera arm and mobile phones being so light, it’s really simple to get the camera down low to shoot interesting angles not usually seen by people. You can obviously also get up high, and shoot from above. It’s a new and fun way to think about what interesting shots you can get.

Time-Lapses, Hyper-Lapses and Motion-Lapses

The gimbal shoots great time-lapses, and you can set it up to pan from one spot to the next with a couple of taps. It’s really simple. It exports to your library, and you can use it in which ever way you want. But, it's super light, and if there is a wind blowing, you might have some shake which doesn't do a time-lapse justice.

The gimbal stabilizes using only two axis, which is different to what DJI’s mobile phone gimbal provides. This makes stabilizing a hyper-lapse quite difficult, and I don’t think it’s ideal for it, unless they can incorporate whatever GoPro has done with regards to stabilization since the GoPro 7.

The hyper-lapse function needs some work. It's very shaky, and I was only walking.

Face Tracking

When in selfie camera mode you have the ability to track your face, which is great when walking around the city where you need to turn left or right often. Without the face tracking, the gimbal will continue to face the direction you were initially walking in.

I think the ability is great, although accessing it in the app was hard, and it seems like you can only do it once "gesture" is activated and you have your hand up in the air trying to tell it to start recording. It’s strange, because you have the device in your hand, and it shouldn’t need gesture controls to activate face tracking, and I really have no idea what gestures do what. Maybe the front facing camera can have face tracking activated automatically. This camera will mostly be used to shoot the person holding the gimbal.

What I Liked

The user experience is simple and intuitive. Bluetooth connectivity happens within the app and there’s no need to jump into settings to set up the link between the gimbal and your phone. Put your phone into the slot, switch it on, open the app, and you’re ready to shoot.

You can shoot manually or have the app set the shutter speed, ISO, and Aperture automatically. It does a rather good job with exposure and the time-lapses and motion-lapses I've shot seem like it gradually increases or decreases the exposure so you have a smooth, well exposed file at the end.

It packs small. It’s so easy and light to fit into a bag, and it’s made of a solid plastic, which doesn’t feel cheap. It’s sturdy, and feels good in hand.

The price is super low. I was sent two gimbals for the review. Once with just the gimbal, and the other with a pouch and tripod stand. I would recommend getting the tripod stand.

What I Didn’t Like

The app is loaded with a lot of useful tools, but there are also the ability of having your video auto-edited, with preset music and transitions. I prefer to do this in Premiere when I edit everything I've shot for the day together, but I suppose there will be some buyers who find this useful.

Due to it having only the X and Y axis stabilization, the controls aren’t as intuitive and can often be pressed without noticing. When pulling the knob up or down the gimbal tilts left or right, which is not usually what I, and I think many other film-makers, expect. Maybe it can be changed to zooming in or out and the current dial for zooming can be changed to the tilting left or right.

What I Found Interesting

You can whiten your teeth in video, and you can also have a slimmer jaw, which I didn’t know was something people thought was better or more aesthetically pleasing. I suppose these types of settings are due to cultural differences and won't be something I'd use.

What I Would Like to See in a Future Update

The ability to add mobile lenses like the ones Moment makes, and having it de-squeeze the lenses like the Moment App does would be great. Or to have the Moment app integrate with the gimbal so you can take motion-lapses with an anamorphic lens using the Moment App instead.

The Insta360 cameras recently added the ability to record sound through the Airpods, which can be great for vloggers who want better sound than the phone, but don’t want to go through the hassle of setting up the Rode lavalier or Wireless Go mics. I think it could be a setting that if the Airpods are connected, the front facing camera always uses it, and when you're shooting the scene with the larger sensor, it records the sound captured by the phone.

Conclusion

You can get a white one or a dark grey one, and you can choose to just have the gimbal or get the gimbal with the case and tripod for an additional $10 (white or grey). I think it's a logical decision. Overall, if you’re a photographer who shares some social videos using your mobile phone, or if you’re a vlogger who doesn’t want to carry around another vlogging camera, this gimbal with the ability to give a good angle with the extending handle is a tool you’d like to look into.

Solar Hybrid Air Conditioner Working Principle

Cooling capacity 9000BTU/12000BTU/18000BTU/24000BTUInside building digital calculator to priority biggest using DC power, auto balance 220V city grid power.  DC input range is DC50V~DC300V,  so can connect max around 1500W solar PV panel Max consumption 90% solar DC power.

This solar thermal hybrid air conditioner no need battery, install take small place, so for the end user whole system running cost is very low.Meanwhile,the hybrid air conditioner price is affordable,welcome to buy.

When night, it can same as normal inverter air conditioner by city power 220V.

ACDC On-grid solar split air conditioner wall split type, the power from solar panel priority supply directly to indoor&outdoor fan motor and compressor. When the solar power is not sufficient, by equipped with dual PV MPPT tracking system, the system automatically switches to run by grid power, thus achieved the AC/DC power supply interaction, and uninterrupted supply power to air conditioner, ensure the system high efficiency up to SEER36, high quality with 3-5 years warranty, convenient installation, wide voltage design, free combination of solar panels.

The air conditioner directly connects solar PV panel to AC unit by MC4 solar connectors, others like normal split acdc aircon.

The greatest advantage of solar thermal hybrid air conditioner is that people need cooling most when the sun is the heaviest, and the more the solar energy is, the easier collecting a lot of energy and make use of will be.

How can big room your hybrid ac unit heat/cool?

9000btu up to 18 sq.mt

12000btu up to 23 sq.mt

18000btu up to 35 sq.mt

24000btu up to 47 sq.mt

How many solar panels do I need to run your ACDC unit?

ACDC09-----solar PV panel 200W*4PCS

ACDC12-----solar PV panel 250W*4PCS

ACDC18-----solar PV panel 300W*4PCS

ACDC24-----solar PV panel 300W*5PCS

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.

Among the Native Americans, there is an ancient legend that their ancestors left 13 talking and singing crystal skulls with the same size of real human skulls. They firmly believe that the skulls left by these ancestors contain important information about the origin, development, and death of human beings. When humans finally find all 13 crystal skulls and gather them together, these magical skulls will help humans solve many unsolved mysteries.

In fact, we found some crystal skulls. It is said that in 1927, the British girl Anna, led by her adoptive father Michelle Hedges, went to an ancient Mayan urban ruin in the tropical jungle of Belize in Central America. After several weeks of hard work, Anna found a crystal-like a human skull at the bottom of a dark pyramid. She was very excited and brought it back to the top of the pyramid.

Anna discovered that the hand carved crystal skulls was 17 cm long, 12 cm wide and 12 cm high, and weighed 5 kg. It was carved from a large piece of crystal according to the shape of the head of an adult woman. Its workmanship is very meticulous. The nose bone is made of three pieces of crystal, and the two eye holes are two round pieces of crystal. Its mandible part can be connected to the skull part, or it can be disassembled. The whole composition is extremely delicate.

What is even more incredible is that scientists discovered that the crystal skull is used as a storage medium for information, using a laser to write some information into it, and after a period of time it is restored with instructions, and the data inside is intact. Experiments show that if someone writes data into a crystal skull thousands of years or tens of thousands of years ago, it can still be preserved to now.

The confusion that crystal skulls give us is much more than that. Scientists have found that when a beam of light shines on the skull, the combination of the prism hidden in the base and the lens hand-cut in the eye socket can produce a series of optical changes. The dazzling light beam it emits has a hypnotic affect. Such magic power will cause people to experience hallucinations, auditory hallucinations, and other phenomena. Some people even touched the crystal skull and found that their diseases were cured miraculously. The magical phenomena are really incomprehensible.

Are you bluffed by this crystal skull? In fact, these are fake, this crystal skull does not belong to the Mayans at all, because the Maya did not have the habit of carving crystal heads, only the indigenous Aztec people in Mexico used stone, bone, wood and other materials to carve human skulls. The custom is called "death head". So far, about a dozen crystal skulls have been found in the world, three of which are kept in museums or research institutes, and the rest are privately collected. None of these crystal skulls belong to the Mayans, but it does have amazing effects.

We have crystal skulls for sale, If you need, please contact us in time.

This staper can simultaneously insert three rows of cross-studded staples on both sides of the tissue, and then use a push knife to cut between the already sewed tissues on both sides to cut and suture the tissue. The GIA surgical stapler is suitable for gia stapler surgery, general surgery, urology, obstetrics, and gynecology, such as lobectomy, gastrointestinal anastomosis, etc. The mainly conclude endo gia universal stapler, endo gia vascular stapler, gia 80 stapler, endo gia 60 stapler.

GIA has larger jaws to help adjust the position, which helps to adjust the position. Many GIA firing button designs are operable on both sides. At the same time, endo gia stapling device with different lengths of staple cartridges, suitable for different surgical needs.

Precautions:

Do not open the instrument immediately after firing. Keep the instrument in the closed state for 15-20 seconds to enhance the hemostatic effect.

Once the firing process is pushed to the end, there is no stopping during the firing;

Place the tissue to be fired within the scale (especially pay attention to the end of the tissue) to avoid invalid operations;

Proper use of the semi-locking device requires that the tissue to be fired is smooth without wrinkles and folds.

After 20 years of development, the application of laparoscopy in surgery has gradually evolved from the initial simple cholecystectomy to today's general surgery involving gastrointestinal, hepatobiliary, pancreatic, thyroid, breast, and abdominal wall surgery. surgery. At present, laparoscopy is in the era of specialization, standardization and further minimally invasive. With the continuous development and innovation of surgical technology and surgical instruments, laparoscopic technology will further develop, and the demand for laparoscopic surgical instruments in the market will further increase.

As one of the most reliable laparoscopic surgery instruments manufacturers, Victor Medical has a rich product line of endoscopic surgical instruments, including basic laparoscopic instruments, single use laparoscopic instruments, and so on, which can meet most of the needs of doctors in the clinic.

With the rapid development of electronic information technology, the upgrading speed of electronic products is getting faster and faster. The production and sales of consumer electronics products, mainly flat-panel TVs, notebook computers, digital cameras, smart phones, and other products, have continued to grow, which has also contributed to the continuous growth of the consumer electronics connector market.

Once upon a time, the development of connectors in the field of consumer electronics was quite smooth, but with the maturity of consumer electronics technology and the increasing number of connector companies entering the consumer electronics industry, the market appeared to be in oversupply. Domestic connector companies, especially in the field of consumer electronics, have a fierce price war on connectors.

Not only that, with the USB TYPE-C interface occupying the market and the emergence and application of wireless technology, not only will most of the interface specifications be unified to reduce the interface, but also the connector technology on consumer electronics tends to be thinner and shorter Technically, a large part of domestic small and medium-sized connector companies have been eliminated. With shrinking market share, meager profits, and improved market access qualifications, the consumer electronics market is no longer as attractive as before.

Compared with the current consumer micro electrical connectors market, the industrial connector market has larger capacity and higher profits. At the same time, it has relatively more demanding military-grade connectors, and the market access qualification should be loose, which can meet most connector companies. Participate in competition. The country will vigorously develop the manufacturing industry, which is also good news for industrial connectors. Therefore, it is natural for domestic connector companies to turn their attention to the industrial connector market.

Seeking a way out in industrial connectors has become a coincident choice for connector manufacturers.

Sunkye is a global solutions provider of connector solutions and differentiated products to the world-wide interconnector industry.

ZHIYUN has released new firmware update (V. 1.97) for Weebill-S. The newest firmware for Weebill-S supports camera control to Sigma fp cameras with firmware V.2.00.

Firmware changelog:

V1.97

1. Support camera control to Sigma fp (Photo/Video);

2. Improved algorithm;

3. Other improved details and better performance.

To download Weebill-S firmware:

https://www.zhiyun-tech.com/weebills/en?from=download

Swimming Pool Water Heater Overview

heating capacity 12kW/19kW/35kW/45kW

R410A refrigerant

380V~440V 50Hz power supply

Best way connect with the solar water heater to together heating the swimming pool, it's running at the lowest cost.

12kw suit for 27.43cube meter pool

19kw suit for 43.42cube meter pool

35kw suit for 79.85 cube meter pool

45kw suit for 102.82 cube meter pool

The swimming pool inverter heat pump unit uses heat pump technology to get heat energy from the air and heat the water, and the water and electricity are completely separated. It has no open fire, and produce no harmful gas. It is safe and environment-friendly. Compared with the hot water equipment that uses other energy sources, it can save 65 to 80% of the operating expenses. All the heat exchangers are made of titanium alloy, which can help resist the chloride ion corrosion in water and is harmless to the human body.

Product Application Place: It is suitable for heating the indoor and outdoor swimming pools of hotels, bathrooms, families, etc.

 Main Functions of Swimming Pool Heat Pump:

Swimming Pool Titanium Tube Heat Exchanger: It has excellent corrosion resistance and can resist the chlorine ion corrosion in water. It has a high heat transfer coefficient and heat transfer effect, it is one of the ideal choices of swimming pool equipment.

High Energy Efficiency Compressor with Reliable Performance and Durability: Adopting American Copeland high-efficiency flexible scroll compressor, the operation performance of the unit is stable, and the heat production efficiency is high. It has professional gas balance and oil balance design, which can ensure the stable operation of the unit.

Full Intelligent Control with Real Color Luminous Design Display.

Intelligent Refrigerant and Oil Control Technology: Advanced system design, intelligent refrigerant together with lubricating oil control technology can effectively avoid the oil deposition and improve the reliability and efficiency of the system. The humanized design of the control system ensures convenient operation.

SUNCHI swimming pool heat pump water heater is a device that uses the principle of reversed can't cycle to recycle and release the evaporated heat back to the swimming pool or the indoor sir to keep the swimming pool and room remaining at constant temperature and achieve the effect of dehumidification.

That is, using a small amount of electric energy to drive the compressor. The high pressure liquid medium evaporates into gas in the evaporator after passing through the expansion valve and absorbs the heat energy in the ambient air in large amount. Then the gaseous medium is compressed into the liquid of high temperature and high pressure by the compressor and enters the condenser, the condenser releases the heat energy and heats the pool water. The above process is repeated constantly to heat the pool water.

 Solution of Swimming Pool Hot Water Project

1. The initial intake and circulating water filtration should be taken into consideration during the swimming pool water treatment, continuous physical and chemical filtration and disinfection should be used to ensure the good quality of the water.

Solution: Adopting the heat supply mode of "circulating heating system". That is, " Hot water unit, circulating official network together with hot water pool". This heat supply mode is energy-saving, environment-friendly, safe and has intelligent automatic management, it is an energy-saving and environmental-friendly constant temperature system with the most operation benefit at present.

2. Artificial swimming pools should be replenished with cold water at the fixed time and to the fixed water level during opening hours

Solution: Using the external circulating eco swimming pool heat pump to provide the circulation power of hot water loop. A hot water pipe interface with upper and lower parts is equipped in the heat insulating water tank. The vertical direction of water temperature presents a clear gradient, and the hot water is fully utilized. The piping interface is linked with the main engine and the circulating water pump, thus forming a closed hot water circulation loop.

3. Design of the swimming pool water supply and backwater system should be reasonable, and the facilities should ensure operation safety and convenience

Solution: Initial heating requires multiple air source heat pump heating devices to gradually heat the pool temperature to the set temperature through cycling. The swimming pool uses a moderate amount of air source heat pumps due to the heat dissipation of the pool surface and the cold water supplement. Besides, we can consider using the idle units for indoor heating, to provide shower hot water and floor heating for customers. We can also consider using the air source as the main heat source equipment, and under the harsh working conditions in winter, we can supply heat by other ways, such as electric auxiliary, boiler, water source heat pump, etc.

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.