🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

how (21)

The core problem of underwater activity of divers is that humans cannot ingest oxygen from water, therefore, it is necessary to carry gas cylinders or to supply gas from the water surface, and the breathing problem has become one of the most complicated technologies in diving technology. But the water actually dissolves a certain amount of oxygen, fish is through the gills to absorb oxygen from the water to maintain life. In theory, if you can master the rapid uptake of oxygen from water, then humans do not need to carry gas in the underwater activities. But keeping breathing for a long time under water has always been considered unthinkable and impossible, scuba diving can only continue to be carried out underwater by carrying air or by piping. Because fish can absorb oxygen from the water by their gills, humans and mammals don't have gills, and they can't use oxygen in the water to support life.

 

Do you know how fish breathe underwater

Let the human fish breathe oxygen in the water for a long time to survive in the water, it sounds like science fiction, and Danish scientists have recently been able to get oxygen permanently underwater, which is a step toward that goal. It's because of the kind of crystal material they developed, this synthetic material is named Neptune crystal AquamanCrystal. This synthetic material can continuously ingest oxygen from air and water without any other means. The oxygen absorbed by the crystal can be released as long as it is heated slightly or exposed to low oxygen pressure. At present, it is difficult to produce this kind of synthetic crystal material in large quantities.

 

The implications of this finding are profound, says Christina Mackenzie, a professor at the university of Denmark, who led the research. She told the science daily: "this material can absorb oxygen from the air. Patients with respiratory dysfunction need daily oxygen, the technology will allow patients to get rid of heavy oxygen tanks. Divers may also use the technology in the future to carry a small amount of this crystal grain. The diver breathes the material into the water to absorb oxygen that is dissolved in water, so there is no need to carry gas cylinders or supply the gas from the water. So they named the crystal AquamanCrystal.

 

Neptune crystals have a spongy composition that absorbs oxygen.

 

Neptune crystals absorb oxygen and rely on cobalt ions. This is very similar to the ability of hemoglobin to absorb oxygen. Because oxygen is difficult to dissolve in water and blood, all living things on earth use metal ions to combine and transport oxygen. The hemoglobin in the blood of people and many animals depends on the combination of iron and oxygen. Myoglobin, the myoglobin in muscle cells, is also a similar molecule. Animals such as crabs and spiders rely on copper ions to combine and transport oxygen. The ability of metal ions to absorb oxygen is huge. So it's not surprising that this crystal glass has a powerful ability to absorb oxygen.

 

 

Our client base spans across defense, security, bioengineering, pharmaceutical, institutional, industrial, and research industries worldwide. We specialize in DFM (optical design manufacturing) input from rapid prototyping to volume production. Our comprehensive metrology coupled with cost-effective philosophy can help Hyperion customers obtain a competitive edge in the global market.

 

 8466761893?profile=original

Read more…

How to Get to yiwu china

Yiwu has a long history, which was founded in 222 B.C. and was withdrawn from the county to a city in 1988. There are many celebrities emerging in YIWU, including Luo Binwang, one of the "Four Great Men of the Early Tang Dynasty", Zongze, the famous general, Zhu Danxi, one of the four famous doctors of the Jin and Yuan Dynasties, Chen Wangdao, the modern educator, Feng Xuefeng, one artistic theorist, and Wu Hao, a historian.

 

Yiwu is a city with many outstanding characteristics - the first county-level comprehensive international trade reform pilot area in China, one of the 18 typical areas of reform and opening up, and the top ten dynamic cities of county-level cities in China.

 

How to get to yiwu

Railway

The total land area of Yiwu Railway Station is 46800 square meters and the building area is 14927 square meters. There are two floors in the waiting room, which can accommodate 3000 people to wait for the train at the same time. At the same time, it has two main railway lines, Zhejiang-Jiangxi line and Hangzhou-Changzhou line, and has the common station of Putien Railway and High-speed Railway.

 

How to get to yiwu china

Highway

Yiwu is the transportation hub in the middle of Zhejiang Province. The double-track of Zhejiang-Jiangxi Railway runs 42 kilometers through Yiwu, with 6 stations, Dachen, Suxi, Lotus Leaf Tang, Yiwu, Guantang and Yiting. Highways are accessible in all directions, including the provincial highway Hangjin Line, Yipu Line and Shengdongyi Line. Jinyong Expressway connects with Hangzhou Jinqu Expressway in this city. Joint consignment business covers more than 140 large and medium-sized cities throughout the country. The three-dimensional traffic of highway, railway and aviation has been formed. Highway traffic network, such as Shanghai-Kunming Expressway, Jinyong Expressway crossing, 03 Provincial Highway, 20 Provincial Highway, 37 Provincial Highway links Yiwu with the surrounding areas.

 

Aviation

Yiwu Airport is 5.5 kilometers away from the center of Yiwu City, which is the largest airport in the Midwest of Zhejiang Province. It has opened more than 10 routes, including Guangzhou, Beijing, Shantou, Xiamen and Shenzhen.

Our company can supply all the information you need for YIWU MARKET - THE BIGGEST WHOLESALE MARKET IN CHINA. TOP EASE, as a good agent for china products, helps with buying goods from China at very competitive price.

 

Yiwu Market MAP

Yiwu International Trade City is the primary wholesale market complex in Yiwu, Zhejiang, China. It's the biggest wholesale market in China. There are a number of other large wholesale markets in Yiwu including the Huangyuan Market for clothing, several furniture markets, a capital goods market, and others. According to a CNN report, it is the world's largest wholesale market for items that are "relatively inexpensive, non-technical, mass-market", serving as the major conduit for many types of such goods. The Yiwu small commodity wholesale market is divided into 5 districts covering an area of 4 million square meters for 75,000 booths where 100,000 suppliers exhibit 400,000 kinds of products.

 8466688888?profile=original

Read more…

How long Does Shipping Take from China to USA

We need to know  how long does a shipment from china to usa take. First, we need to know what ports the United States has.

 

 

Port of Mexico: Los Angeles, Long Beach, Oakland Oakland, San Francisco San Francisco, Seattle, Tacoma Tacoma.

 

 

East Port: Portland, New York, Norfolk, Savannah, Charleston, Baltimore, Houston, Wilmington, New Orleans, Miami, Jacksonville.

 

 

How long does shipping take from China to us depends on the route of the east coast and the West coast? To the west coast of the United States, shipping takes about 13 to 16 days, because shipping companies have different prices, so the time is long or short. It takes about 25 to 28 days to get to the east coast of the United States through the Pacific Ocean, then through the Panama Canal, and finally to the East coast. It can also be transported to the West Coast and then inland to the East Coast, commonly known as the Small Road Bridge (MLB), which takes about 21-23 days, but is more expensive than shipping.

 

 

Let's take a concrete example to illustrate how long does shipping take from China to USA.

 

 

Take Shenzhen for example. It takes about 14 to 20 days to get to Mexico Port and 30 days to get to Mexico Port. So it's better to know exactly where to get it.

 

 

Taking Shenzhen to Los Angeles as an example, HPL, KLNE, CMA, NYK and other shipping companies need about 13 days of the voyage, APL, WHL, OOCL, COSCO, PIL and MSC need about 15 days.

 

 

Taking Shenzhen to New York as an example, KLINE, COSCO, NYK, OOCL, HPL, EMC, APL and other shipping companies need 28 days'voyage, HMM, MSK, ZIM, MSC and other shipping companies need about 30 days' voyage.

 

How long does shipping from china take

 

Of course, the same shipping company, different shipping time, the limitation will be a day or two. For example, if the ship to Los Angeles (LA) leaves on Thursday and Saturday, it will arrive in 14 days. If the boat leaves on Friday and Sunday, it will arrive in 11 days. The boat to Oakland (OAK) also leaves on Friday and Sunday. It takes 15 days to arrive.

Our company can supply all the information you need for YIWU MARKET - THE BIGGEST WHOLESALE MARKET IN CHINA. TOP EASE, as a good china wholesale sourcing agent, helps with buying goods from China at very competitive price.

 

Yiwu Market MAP

Yiwu International Trade City is the primary wholesale market complex in Yiwu, Zhejiang, China. It's the biggest wholesale market in China. There are a number of other large wholesale markets in Yiwu including the Huangyuan Market for clothing, several furniture markets, a capital goods market, and others. According to a CNN report, it is the world's largest wholesale market for items that are "relatively inexpensive, non-technical, mass-market", serving as the major conduit for many types of such goods. The Yiwu small commodity wholesale market is divided into 5 districts covering an area of 4 million square meters for 75,000 booths where 100,000 suppliers exhibit 400,000 kinds of products.

 8466688888?profile=original

Read more…

How To Buy Goods In Yiwu Market

Generally speaking, many importers buy products from Chinese fairs, Alibaba, or market in Guangzhou, but you can only attend the fairs in specific times, and there are so many suppliers on Alibaba, some do not have enough experience for the business. Also, the market in Guangzhou is mainly selling electric products and other single category product.

 

So I highly recommend that you come to Yiwu Wholesale Market, Which is the biggest wholesale market in the world. I am sure you will find the proper supplier for yourself.

 

  1. Where is Yiwu?

Yiwu is located in central Zhejiang province near the central eastern coast of China. It's famous as the world's wholesale commodity center. It close to Ningbo port and Shanghai port.

There are more than 70, 000 booths in the Yiwu market exhibiting different products. It makes Yiwu be more of a huge fair instead of a market. And what distinguishes it from all the other open fairs is that Yiwu market is open all year round, except during the Spring Festival.  Many suppliers also come from different parts of China, they concentrated their superior products on the Yiwu market to sell, which makes it easier for customers at home and from abroad to make centralized purchases.

2.The map of Yiwu market

Yiwu market has a total of 5 districts, each district have 3-4 floors, it is better to know where is the product before you go inside, you can refer to the map below:

 

How To Buy from Yiwu Market

 

  1. How to communicate with the suppliers in the market ?

Most of the suppliers in the market understand basic English, like price, quantity, delivery time, they usually show you the RMB price from a calculator .So if you do not have special requirement for the order and can pay cash, you can do yourself .

 

But if you want a deeply communication for the price, or the packing, it is better to get a translator .The translator will help you negotiate the price, tell the suppliers all your requirements, like MOQ for customizing packaging and so on . The reward of a English translator will be about $40-$50 per day .

 

But the translator will help you only in the market, after leaving the market, the rest will be not her job . It is better for you to find a agent to do the rest work for you.

 

  1. How to find a Yiwu Marketagent?

If you are abroad but want to find a good agent in advance for visiting the Yiwu market, then you can search for "Yiwu Market Agent" on Google, where you will find some Yiwu agents. If you have already arrived in Yiwu, you will see a lot of advertisements about Yiwu agents at the airport, train station, and even at your hotel entrance. You can choose one of them. it is important to find a good company and build trust with them, since long-term cooperation is important.

 

  1. What does the Yiwu market agent can do for you?

1)If you plan to come to Yiwu, the agent can book tickets and hotel for you, and pick you from the air port or train station to the hotel .

2) The agent will take you to the market to find the products you want , and help to negotiate price with suppliers, and make records for all the information of the product, like price, qty/ctn, cbm/ctn, size, weight, delivery time, and take photos.

3)The agent will print all the products information for you before you go, also send to your email. It is easier for you to choose the items, and save time.

4)After you decide to make an order for some items, the agent can help you to arrange the order, and follow the order to make sure it can deliver on time .

5)The agent usually have their own warehouse in China, which can protect the goods well. They will also check the goods when the supplier deliver, and can send you inspection pictures in you need.

6)The agent will help to contact with your shipping forwarder to arrange the shipment for you, if you do not have, the agent will recommend you a experienced forwarder to make sure the goods are shipped successfully .

7)The agent will prepare all the documents to you to help you clear the containers. If you need special certifications, it is better to inform the agent in advance .

 

  1. How to customize your products?

1) Find the factory or your agent with the products you need, provide the quantity and design requirements, and get a satisfied quotation.

2) Provide your exact design drawing and design requirements (usually in AI format). If there is no source file for the design, ask the factory to help with the design.

3) If you need to see the accurate effect of finished products, you can ask the factory to make the proof (1-10 pc), and then the whole production can be carried out after confirmation. If you do not need to make the sample, you can directly make the whole production after confirming the whole production sample.

4) Get your custom products

 

  1. How to change the packaging and tag?

1) Provide accurate packaging style and label template to the factory or agent.

2) Pay a certain labor cost, carton cost and packaging cost.

 

  1. How to distinguish a foreign trade company from a factory?

Foreign trade company: Have many kinds of products, the minimum order quantity is usually small, the price is slightly high, middle- specialization level in products. Timely reply, thoughtful service, clear communication. Problems solved in a timely manner, professional trade process, let a person be at ease.

 

Factory: The variety of products is relatively single, the minimum order quantity is usually large, the price is relatively low, high- specialization level in products. Not timely reply, lack of good service, communication is sometimes difficult. The problem was solved slowly and the trade process was not professional or even existed.

Our company can supply all the information you need for YIWU MARKET - THE BIGGEST WHOLESALE MARKET IN CHINA. TOP EASE, as a good Yiwu purchasing agent, helps with buying goods from China at very competitive price.

 

 8466757677?profile=original

Read more…

How To Go To Yiwu?

Do You Konw How To Go To Yiwu?

HK to Yiwu

If you are landing in Hongkong, you can buy this flight directly to Yiwu airport.

 

Guangzhou to Yiwu

*By flight

 

guangzhou to yiwu by flight

 

Guangzhou fly to Yiwu need 2 hours. It is very convenient. If you are attending the Canton Fair in Guangzhou, it is easy to come to Yiwu.

 

By High-speed rail

 

Guangzhou South Yiwu

G1304 13:24 20:08

G1306 15:38 21:42

G1404 15:56 22:51

Guangzhou also has high-speed rail direct to Yiwu. This is also a choice for you to come to Yiwu.

 

Beijing to Yiwu

 

*By Flight

beijing to yiwu by flight

 

It Takes 2h15m from Beijing to Yiwu.

 

*By high-speed rail

 

Beijing South Yiwu

G33 9:30 16:15

G163 10:45 17:56

G45 15:25 22:15

Shanghai to Yiwu

 

If you fly to Shanghai first, you can take a bus around 3 hours or by high-speed rail to Yiwu around 1h30m.

 

Flight Shanghai(hongqiao) YIwu

G7331 6:17 7.56

G7333 6:29 8:05

G1383 6:45 8:20

G1651 6:55 8:42

G2365 7:12 8:52

G1371 7:22 8:57

G1341 7:32 9:07

G1337 8:25 10:05

G7325 8:30 10:47

G7349 9:10 10:42

G1655 9:23 10:58

G1377 9:28 11:03

G1301 10:23 12:02

G1349 10:48 12:31

G7461 11:04 13:04

G1375 11:15 12:49

G1333 11:39 13:24

G7591 12:01 13:39

G1387 12:20 13:55

G1633 12:25 14:00

G7335 12:30 14:16

G1369 12:40 14:21

G7375 12:51 14:30

G1659 12:57 14:25

G1389 13:10 14:36

G1355 13:47 15:24

G7347 14:25 15:59

G1635 14:35 16:10

G1637 15:13 16:57

G7337 15:32 17:07

G7321 16:17 18:02

G1361 16:42 18:17

G1363 17:09 18:53

G7367 17:53 19:47

G7371 18:13 20:02

G1395 18:28 20:06

G7339 18:35 20:19

G1227 18:56 20:43

G7381 19:11 21:00

G7491 19:33 21:18

G7383 20:44 22:32

Hangzhou to Yiwu

 

Hangzhou to Yiwu about 120KM, you can by train, bus and taxi to Yiwu.

 

*By High-speed rail

 

We suggest you By High-Speed Train only need about 30 minutes.

If you are late, don't worry, From 6:00 am to 9:53 pm, there have a train every 10 minutes.

 

*By bus

There are buses from 07:00 to 19:10 every 15 minutes from Hangzhou Airport Bus Station to Yiwu Trade City Passenger Transport Center. It takes 2 hours.

 

*By Taxi

 

We don't suggest By Taxi to Yiwu, Because Taxi price is very high and need more than 1 hour to Yiwu.

 

If you have any question, pls feel free to contact us.

 

China Products Sourcing Services

We have more than 1,000 employees in getting products from China. We source, inspect, and ship directly to you, providing professional China sourcing services. TOP EASE is an expert China products wholesale sourcing agent company.

8466742884?profile=original

Read more…
  1. Stimulate Students' Interest in Learning Chinese Characters

    When students do not understand the relationship between the glyphs and phonograms of Chinese characters as well as the origin of Chinese ideograms. They feel that Chinese characters are difficult to learn. Under such fears, it is difficult to have an interest in Chinese characters. In the early stage of Chinese character teaching, we must stimulate students' interest in learning Chinese characters and help them overcome this fear. Only in this way can Chinese teaching be carried out smoothly.

 

There are two ways to stimulate students' interest in learning and overcome the fear of difficulty. The first is to introduce the origin of Chinese characters, and let students understand how Chinese characters evolved to what they are today. How did the original shape of Chinese characters come from? And how does it express the meaning? In the process of introducing the evolution of Chinese characters, students are also allowed to understand the ideographic functions of Chinese characters, especially the pictographic and ideographic characters and the shape of the sound words. The second method is to introduce the relationship between glyphs and words, glyphs and meanings so that students can understand the relationship between sound and meaning, eliminate the fear of difficulty, and provide more clues for the memory of Chinese characters.

Introduce the origin of Chinese characters. There are 7 kinds of sayings about the formation of Chinese characters. Among them, pictographs express meaning most directly. Introducing the origin of Chinese characters from hieroglyphics is easier for students to accept and understand. The specific operation is as follows: Give the students a few Oracle characters that they have already learned, and let the students guess what the words are. Students will make all kinds of guesses. Of course, it is very likely that they will not be guessed correctly. It doesn't matter. After students have used their imagination, teachers can tell them what the words are. Most of the Chinese characters have changed a lot, and very different from the current simplified characters. Comparing the original Oracle with the simplified characters often arouses the students' surprise. The students will feel very strange and very interesting. At this moment, the teacher should give them a history of the development of this Chinese character, and let the students understand how it evolved into what it is today.

For example, write the oracle of the horse on the blackboard and ask the students to guess what does it mean, then tell the students the answer. The students will find that the two "horse" characters are very different, then the teacher will show the students how the word "horse" gradually evolved from the pictogram to the current glyph.

2. Resolutely Implement The Component Teaching Method

Component teaching is an effective teaching method. It can help students understand the relationship between various parts of Chinese characters, and can also reduce the number of things students need to remember. In the study of psychology, people's cognition of Chinese characters has both first whole then part processing and first part then whole processing. These two processing methods can be flexibly utilized according to the relationship between the whole and parts, parts and parts of different Chinese characters. As mentioned above, the relationship between the whole and parts, parts and parts will affect the learning of Chinese characters. The part mentioned here refers to components rather than strokes. In the component teaching, it is not only to let students understand the relationship between the whole and part, part and part, but also to improve the students' familiarity (or sensitivity) with specific exercises. This level of familiarity can improve the speed of recognizing Chinese characters, as well as enhance memory.

Now, for us, there is no need to emphasize the advantages and importance of the component teaching method. What we need to focus on is how to truly adhere to the component teaching and improve students' familiarity with the relationship between Chinese characters and components, components and components. I think there are two exercises that can achieve this goal: one is the Chinese character split practice, and the other is the Chinese character combination exercise.

More about Tips for learning chinese characters.

 8466731086?profile=original

Read more…

Fish Tank Size: 80*40*45 cm

Lighting: Adjustable LED Aquarium Light 5W/8W/11W/16W

 

Bottom Mud Material: Volcanic Stone, Light Stone, Thin Filter Sponge, Foam Plastic Cloth, Water Moss, Planting Soil (Peat soil, Vermiculite, Perlite)

Material: Dynasty Jade Stone, Tank divider, Landscaping Glue,   artificial coral decorations   

Plants: Leucobryum juniperoideum, Giraldiella levieri, Metasequoia glyptostroboides, Hydrocotyle sibthorpioides, Ferns etc.

 

 

Finished Paludarium Appreciation

 

In the beginning, some hydroponic plants were cultivated in the water grass tank. Later, I wondered if it would be better to plant some wet plants on the water. I searched a lot of information on the Internet, so then the aquascaping journey began.

I believe everyone has a certain understanding of planted tanks and water tanks. But Paludarium that can both keep plants and raise fish is not so simple.

 

The first thing to consider is how to isolate the water surface from the land and try to maintain the size of the water substance as much as possible.

 

It was known that most of the Paludarium tanks' water substances are just a small piece you saw before, and there is less space for fish to move. If they can be improved, they can both raise fish and landscape plants. After considering several methods and materials, it was finally decided to choose a partition tank divider commonly used by everyone in the Vivarium to build a base, which was quite successful.

This kind of partition board divider can play a great role in the landscaping of the fish tank. In this Paludarium fish tank, its fast, convenient and practical functions are highlighted.

 

Firstly, splice the head and tail of the partition board together, and then cut the partition board into an appropriate size according to the fish tank. And as a base, place it at the bottom of the fish tank.

Then you can spread a layer of foam plastic on the partition to prevent the mud from falling through to the bottom and spreading.

Then in this order, you can lay the material on the partition:

 

From bottom to top:

Volcanic Stone, Light Stone, Thin Filter Sponge, Foam Plastic Cloth, Water Moss, Planting Soil (Peat soil, Vermiculite, Perlite)

 

After the foundation is done, the Dynasty Jade Stone can be gently inserted into the soil. Moss and other plants can be placed around it.

Here I put Leucobryum juniperoideum, Giraldiella levieri, Metasequoia glyptostroboides, Hydrocotyle sibthorpioides, Ferns and so on. The sticking tool I use is Aquarium Underwater Safe Glue.

 

When all the steps are completed, pour the water slowly into the blank space along the edge of the fish tank. (Note: Do not use the impact water flow here, It will lead to soil base damage.)

 

Finally,  the fixed steps we know - water circulation, water purification. (Here is the same treatment as the general fish tank)

When the water quality of the fish tank is acceptable, you can put the cute fish in it.

SENZEAL: THE MOST SUITABLE CHOICE FOR AQUARIUM

If you want to buy high-quality aquarium accessories at a reasonable price, then believe me Senzeal must be the best choice for you. Senzeal is the ultimate destination for aquarium accessories, here it provides a variety of aquarium-related products, mainly including sustainable and high quality aquatic biological equipment, aquarium accessories, aquarium decorations, fish care, and plant care, to provide you with the best shopping experience. Our online store offers the latest and best quality of aquarium-related products. Therefore our facilities use state-of-the-art equipment and technology to maintain the water quality conditions and the optimum health of all aquatic life. You can comfortably shop on Senzeal.com at home, we will use the safest transportation system, to ensure that all products before arriving at your home can get the best care.

 

Read more…

Balancing valve working principle

Balance valve is a dynamic and static balancing valve under hydraulic conditions. Such as static balance valve, dynamic balance valve.
Valve body material: cast iron, cast steel,
Work pressure is 0.6-4.0 MPA.
The working temperature is - 5 C - 350 C.
Valve caliber DN15-DN300,
Connection mode: flange, internal thread,
Driving mode: manual and electric.
Manufacturing standard: national standard.

How do balancing valves work?
Balancing valve is a special function valve. It has good flow characteristics. Besides, it has valve opening index, opening locking device and pressure measuring valve for flow measurement. By using special intelligent instrument, the flow value flowing through the balance valve can be directly displayed by inputting the valve type and opening value according to the measured pressure difference signal. As long as the balance valve with appropriate specifications is installed in each branch and user's entrance and debugged once with the special intelligent instrument, the flow rate of each user can reach the set value.
Static balancing valves are also called balancing valves, manual balancing valves, digital locking balancing valves, double-position regulating valves, etc. It is through changing the clearance between the spool and the seat (opening), to change the flow resistance through the valve in order to achieve the purpose of regulating flow. Its object of action is the resistance of the system, which can distribute the new water in proportion to the design calculation, increase and decrease the branches in proportion at the same time, still meet the flow demand of part of the load under the current climate needs, and play the role of heat balance. Dynamic balancing valves are divided into dynamic flow balancing valves, dynamic differential pressure balancing valves, self-operated differential pressure control valves and so on.
Dynamic flow balance valve is also called self-operated flow control valve, self-operated balance valve, constant flow valve, automatic balance valve, etc. It automatically changes the drag coefficient according to the change of system working condition (differential pressure). In a certain range of pressure difference, the flow through can be effectively controlled to maintain a constant value, that is, when the pressure difference before and after the valve increases, the flow through the valve can be maintained by the action of automatic closing small. On the contrary, when the pressure difference decreases, the valve opens automatically and the flow rate remains constant. However, when the pressure difference is smaller or larger than the normal working range of the valve, it can not provide additional pressure head after all. At this time, the flow rate of the valve to the full open or closed position is still lower or higher than the set flow rate can not be controlled.
Dynamic differential pressure balancing valve, also known as self-operated differential pressure control valve China, differential pressure controller, constant voltage variable synchronizer, differential pressure balancing valve, etc. It uses differential pressure to adjust the opening of the valve, and uses the change of pressure drop of the valve core to compensate for the change of pipeline resistance, so as to keep the differential pressure basically unchanged when the working condition changes. The differential pressure control valve working principle is that in a certain flow range, it can effectively control the constant pressure difference of the controlled system, that is, when the pressure difference of the system increases, it can ensure that the pressure difference of the controlled system increases by automatically closing the valve. When the pressure difference decreases, the valve opens automatically, and the pressure difference remains constant. The self-operated pressure difference control valve has an automatic plug closing state within the control range. The pressure difference between the two ends of the valve exceeds the preset value. The plug opens automatically and adjusts the opening automatically under the action of the pressure sensitive film to keep the pressure difference between the two ends of the valve relatively constant.

 

Zheng feng brand is one of the most professional water gate valve manufacturers in china. And we sincerely invite and welcome people from all around the world to invest and create more values together.8466677689?profile=original

Read more…

Balancing valve working principle

Do you know differential pressure control valve working principle?

 

Balance valve is a dynamic and static balancing valve under hydraulic conditions. Such as static balance valve, dynamic balance valve.

Valve body material: cast iron, cast steel,

Work pressure is 0.6-4.0 MPA.

The working temperature is - 5 C - 350 C.

Valve caliber DN15-DN300,

Connection mode: flange, internal thread,

Driving mode: manual and electric.

Manufacturing standard: national standard.

How does a balancing valve work?

Balancing valve is a special function valve. It has good flow characteristics. Besides, it has valve opening index, opening locking device and pressure measuring valve for flow measurement. By using special intelligent instrument, the flow value flowing through the balance valve can be directly displayed by inputting the valve type and opening value according to the measured pressure difference signal. As long as the balance valve with appropriate specifications is installed in each branch and user's entrance and debugged once with the special intelligent instrument, the flow rate of each user can reach the set value.

Static balancing valves are also called balancing valves, manual balancing valves, digital locking balancing valves, double-position regulating valves, etc. It is through changing the clearance between the spool and the seat (opening), to change the flow resistance through the valve in order to achieve the purpose of regulating flow. Its object of action is the resistance of the system, which can distribute the new water in proportion to the design calculation, increase and decrease the branches in proportion at the same time, still meet the flow demand of part of the load under the current climate needs, and play the role of heat balance. Dynamic balancing valves are divided into dynamic flow balancing valves, dynamic differential pressure balancing valves, self-operated differential pressure control valves and so on.

Dynamic flow balance valve is also called self-operated flow control valve, self-operated balance valve, constant flow valve, automatic balance valve, etc. It automatically changes the drag coefficient according to the change of system working condition (differential pressure). In a certain range of pressure difference, the flow through can be effectively controlled to maintain a constant value, that is, when the pressure difference before and after the valve increases, the flow through the valve can be maintained by the action of automatic closing small. On the contrary, when the pressure difference decreases, the valve opens automatically and the flow rate remains constant. However, when the pressure difference is smaller or larger than the normal working range of the valve, it can not provide additional pressure head after all. At this time, the flow rate of the valve to the full open or closed position is still lower or higher than the set flow rate can not be controlled.

Dynamic differential pressure balancing valve, also known as self-operated differential pressure control valve, differential pressure controller, constant voltage variable synchronizer, differential pressure balancing valve, etc. It uses differential pressure to adjust the opening of the valve, and uses the change of pressure drop of the valve core to compensate for the change of pipeline resistance, so as to keep the differential pressure basically unchanged when the working condition changes. The valve working principle is that in a certain flow range, it can effectively control the constant pressure difference of the controlled system, that is, when the pressure difference of the system increases, it can ensure that the pressure difference of the controlled system increases by automatically closing the valve. When the pressure difference decreases, the valve opens automatically, and the pressure difference remains constant. The self-operated pressure difference control valve has an automatic plug closing state within the control range. The pressure difference between the two ends of the valve exceeds the preset value. The plug opens automatically and adjusts the opening automatically under the action of the pressure sensitive film to keep the pressure difference between the two ends of the valve relatively constant.

 

Zhengfeng is one of the most professional china check valve manufacturers. And we sincerely invite and welcome people from all around the world to invest and create more values together.8466649467?profile=original

Read more…

CMC Usages in Food Industry

How to use cmc powder?

 

  1. CMC creamApplications in Fermented Yoghurt

 

1.1. Main Raw Materials of Fermented Yoghurt

 

Fresh milk or milk powder, sucrose ester, compound stabilizer (including CMC), granulated sugar, sodium citrate, phosphate, preservative, essence and drinking water, etc.

 

1.2. Processing Technology

 

Raw milk→Sterilization→Cooling→Insulated fermentation→Cooling→(Compound CMC+Sugar+Sucrose Ester) Completely dissolving and then adding→Stirring→Flavoring acid and odor→Homogeneous sterilization→Cooling→Packing

 

 

 

1.3. Key Point During Processing

 

1.3.1. The compound stabilizer is acid-resistant CMC: PGA (propylene glycol alginate)=1:1,  the dosage of compounded CMC accounts for 0.4% of the total amount.

 

1.3.2. Compounded stabilizer, sugar and sucrose ester had better be dry-mixed. Then dissolving with 50℃ water. Filtering the solution after complete dissolution. Cooling it to 15℃ and add into the yogurt.

 

1.3.3. Slowly flavoring acid, then becoming quickly to control the final pH value at 3.8-4.0. The temperature should be below 15℃when flavoring acid and odor. The conditional factories usually agitate below 5℃.

 

1.3.4. Can select CMC FM9, FH9, FH10.

 

  1. CMC Applications in Formulated Yoghurt

 

2.1. Main Raw Materials of Formulated Yoghurt

 

Milk powder, granulated sugar, acid fastness CMC, preservative, essence, protein hydrolysate citric acid, sodium citrate, purified water, etc.

 

2.2. Processing Technology

 

Drymix acid fastness and granulated sugar → Dissolving→Mixing other raw materials→Flavoring acid and odor→Homogenization→Sterilization→Cooling→Packing

 

2.3. Key Point During Processing

 

2.3.1. Agitating and Cooling temperature should be below 10℃ when flavoring.

 

2.3.2. Slowly flavoring acid, then becoming quickly to control the final pH value at 3.8-4.0.

 

2.3.3. Can choose CMC FH9 or FVH9. The dosage is 0.4% or so.

 

  1. CMC Applications in Instant Noodles

3.1. Applications in Flour

 

Adding CMC for ice cre am into the flour can make the flour with characters of dispersion, water retention, and strong cohesion. It can shorten the kneading time, and easy to operate to, Increasing toughness and strength of noodles to improve the premium grade product rate. Different from natural gum, the noddles are smooth with uniform, stable interior structure, and bright, clean surface after adding CMC gum. For oil-fried instant noddles, oil content can be effectively reduced after adding CMC. Because CMC has characters of hydrophilic and hydrophobic oil, to control the oil content at 18% or so.

 

You can add CMC FH9, FVH9 or FVH6 into flour, with a dosage 0.25%-0.4%. When using CMC, you can premix it with other additives,  dissolving with water till completely dissolving, then spraying on the kneaded flour. Or you can mix up CMC, other additives and flour together, and then add water and knead to flour billet.

 

3.2. Applications in Seasoning Bags

 

CMC can be added in sauce or seasoning bags of various instant noddles. CMC is featured by thickening, strong dispersion, water, and freshness preservation, with which sauces can have better homogeneity and longer shelf life. Materials in sauce or seasoning bags can dissolve and disperse quickly with CMC gum's own characteristics, so the taste of noodle soup is delicious.

 

Can select and add CMC FH6 or FH9 (salt tolerance) into sauce and seasoning, with dosage 0.8%-1.2%. Premix CMC, sugar, monosodium glutamate and salt, and then mix them with other ingredients.

 

  1. CMC Applications in Ice Cream

 

4.1. CMC Usages in Ice Cream

 

4.1.1 CMC can increase melting-resistance of ice cream

 

CMC aqueous solutions have excellent fluidity, comparing with other pulp, especially starch gum and guar gum. The stable lattice-like structure can be formed under both high and low temperatures. This is the reason that ice cream has good melting-resistance with CMC.

 

4.1.2 CMC is ideal excipient of ice cream

 

CMC aqueous solution has high viscosity, compared with that of xanthan gum, gelatin, and sodium alginate. The viscosity of 2% aqueous solution is more than 30,000mPa.s tested by Brookfield viscometer. There is higher viscosity if mixing CMC with sodium alginate. CMC produced by Fortune Biotech has good pseudo-plasticity, so in the case of homogeneous aging, the consistency and viscosity of ice cream liquid can be raised with CMC. Avoiding fat globule gathering again during the procedures of cooling and aging. Moreover, CMC has strong dispersion to enable mixed materials much more uniform and suitable for industrial production.

 

4.1.3 CMC is an ideal swelling agent of ice cream

 

CMC is a kind of gum with strong hydrophily, which can combine with free water in the liquid material quickly, and evenly distribute in it. When stirring, many fine air bubbles will form and uniformly distribute in the liquid material, so that to make the structure of ice cream smooth, improve expansion rate and taste.

 

4.1.4 CMC is emulsifier of ice cream

 

CMC has certain emulsification. CMC can not only chelate the calcium ion in mixed materials but also can dissociate casein molecular mass. It can strengthen the protein fat emulsifying ability, and reduce the aggregation of fat. CMC plays a certain role during ice cream homogenization.

 

4.2. The Requirements and Dosages of Adding CMC into Ice Cream

 

It requires high viscosity when adding CMC into ice cream. It also requires certain acid fastness when using CMC to produce fruit ice cream.

 

Can use CMC FVH6 for common ice cream. Dosage is 0.4%-0.5%. When compounding with other gums, CMC dosage is 0.3%-0.4%, and the dosage of other gums is 0.1%-0.2%. For acid ice cream, you can use CMC FVH9.

 

  1. CMC Applications in Soy Milk

 

5.1 CMC Usages in Soymilk

 

CMC has the property of deflocculation, emulsification and stabilizing. The powerful dispersing ability of CMC prevents fat layering, has an effect of whitening, sweetening and removing beany flavor.

 

5.2 Use Precautions of CMC in Soymilk

 

 

 

There are different tastes of soymilk, such as ginger and jujube soymilk, peanut sour soymilk, various vegetable, and fruit soymilk. The temperature should be below 20℃ when adjusting the pH value to change the soymilk taste. Should prevent sediment floating. Besides, it requires homogenization with homogenization pressure 20-30mPa.s. For the soymilk contains more fat need to add 0.1%-0.2% emulsifier.

 

5.3 CMC Model Selection and Dosage

 

For the usual sweet soymilk with pH value 6.5-7.5, we can use CMC FH6. When the pH value of soymilk is 3.8-4.2, it can select CMC FH9. Dosage is usually 0.35%-0.

 

  1.  CMC Applications in Moon Cakes and Other Cakes

 

6.1 CMC Usages in Moon Cakes and Other Cakes

 

Mix CMC aqueous solution with flour to make moon cakes and other cakes, can inhibit milden and rot, prevent water shortage and hardening, prolong shelf life. Adding CMC into flour can adjust and increase gluten strength, improve the flour structure. With good moldability, bright and full pie body, and not easy to damage, etc.

 

Pies with adding of CMC can make the stuffing delicious and soft with good moldability, water retention, and fresh taste.

 

6.2 CMC Model Selection and Dosage

 

Usually, add CMC in the surface or wrapper of pies with dosage 0.5%-1.0% Can choose CMC FH6 or FVH6. CMC dosage in pies body is 0.5%-1.0%, the models to use are according to pies tastes. For example, common pies can use model FH6, fruit pies can use FH9.

 

  1. CMC Applications in Soy Sauce

 

7.1 CMC Functions and Use Method in Soy Sauce

 

Soy sauce is a necessity in daily life. People like soy sauce with less sediment, certain consistency, and good homogenization. So the best model for making soy sauce is food grade salt tolerance CMC.

 

Dissolve CMC and water, then add and mix with other seasonings. Soy sauce can be got through the procedure of stirring and so on. CMC is a kind of strong dispersing agent. Can evenly disperse any seasonings to get a bottle of homogeneous soy sauce. Moreover, CMC has characters of thickening and stabilizing, with which the color, taste, and odor of soy sauce will have obviously changed.

 

7.2 CMC Model Selection and Dosage in Soy Sauce

 

Dosage in soy sauce usually is 0.3%-0.45%. Can use model FH9 or FM9.

 

  1. CMC Applications in Meat Products (Ham and Eggs, Luncheon Meat, etc)

 

8.1 CMC Functions in Meat Products

 

Adding CMC into meal products can uniformly distribute condiments, adjust the viscosity. Also can combine condiment and solid ingredient well. It can make meal products much more tender and delicate, prevent oil spilling out, and extend shelf life.

 

8.2 CMC Model Selection and Dosage

 

Usually, the dosage of CMC in meal products is 0.6%-0.8%. The maximum is 1.5%. Can use model FH6 or FVH6.

 

  1. CMC Applications in Liquid Drinks (Juice, Tea, etc.

 

9.1 CMC Functions in Liquid Drinks

 

Adding CMC into liquid drinks (such as juice and tea) can make the suspended matters uniform and full without layering. Make the drinks have bright colors, mellow taste. Prevent sugar crystallizing again, and prolong shelf life.

 

9.2 CMC Model Selection and Dosage

 

CMC dosage in juice and tea drinks is 0.35%-0.45%. For juice, usually use CMC FH9, for tea drinks, usually select CMC FH6.

 

  1. CMC Applications in Mixed Congee and Sesame Paste, etc.

 

10.1 CMC in food such as eight treasure congee and sesame paste, etc has the function of increasing consistency. Can make solid in congee uniformly suspend in the container. It can get a delicate and sweet taste, and improve stability. The formerly mentioned advantages are much more outstanding comparing with that of starch paste.

 

10.2 CMC Model Selection and Dosage

 

CMC dosage in mixed congee is 0.3%-0.4%. Can use CMC FVH9. To make sesame paste and other food, the dosage is 0.3%-0.4%. Can use CMC FH6.

 

11.CMC Applications is Quick-Frozen Food

 

11.1 CMC Functions in Quick-Frozen Food

 

In the market, there are many kinds of frozen food, such as steamed bun stuffed with juicy pork, dumplings, wontons, glue puddings, spring rolls and so on. Adding CMC during wrappers processing can, smooth. Its good water retention characters can prolong the shelf life.

 

After adding CMC in the frozen food can distribute other materials evenly. Excellent water and fresh-keeping. Nice and delicate taste.

 

11.2 CMC Model Selection and Dosage

 

For wrappers of frozen food, the dosage is 0.3%-0.4%. CMC in fillings is 0.6%-0.8%. Can choose CMC  FH6 or CMC FVH6.

 

12.CMC Applications in Keeping of Vegetables, Fruit Fresh

 

12.1 CMC Functions of Freshness Keeping

 

Applying, spraying and dipping CMC solution on the surface of an orange, peach, plum, apple, longan, litchi, and other fruit, as well as eggs, vegetables, fish and meat has functions of sterilization and destroying mildew. Objects that need to be kept freshness tend to rest state to achieve preservation. Refrigerating fruit after spraying CMC solutions on its surface will have better preservation effect.

 

12.2 CMC Model Selection and Dosage

 

To keep freshness, usually, use 0.4%-0.8% of the CMC aqueous solution to spray and dip. Can use model FM6 or FM9.

 

  1. CMC Applications in Condiment

 

Applying CMC into jam, chili sauce, peanut butter, sesame paste, ketchup, and other condiment has the effect of enhancing consistency, water retention and stabilizing. It can improve the quality of the formerly mentioned products. Enhance the sensory indicators, such as color, aroma, taste, and shape.

 

CMC dosage in condiment is 0.4%-0.5%. Can use model FH9.

 

  1. CMC Applications in Multifarious Flour Products

 

Biscuit, noodles, rolled noodles, bread and other products can adjust the gluten strength, improve flour quality. Easy to control water. Raise strength. Flour products are not easy to go broken. Can make bread peak height uniformly, increase the volume, reduce dregs.

 

CMC dosage in flour products is 0.3%-0.4%. Can use model FH6 or FVH6.

 

  1. CMC Applications in Beer and Rice Wine.

 

Applying CMC in beer can make the beer foams much more delicate and stable with soft, mellow fragrance and long finish.

 

The dosage of CMC in beer and rice wine is 0.2%-0.4%. Can select model FM6 or FM9.

 

 

Fortune Biotech is a professional sodium cmc supplier in the production field of carboxymethyl cellulose (CMC), with over 40 years' experience.

Read more…

Microcrystalline Wax

KH Paraffin Wax 80M

Features: Fine microcrystalline structure with partial linear structure as paraffin wax, High flexibility

Applications: Rubber protective wax; Medium melting point hotmelt adhesives for bookbinding; Fruit coating; Packaging, paper and corrugated board coating; Inks and Toners.

Our waxes have been exported to Japan, Europe, North America, Brazil, New Zealand, and 20 other countries and regions throughout the world.

 

Where to buy microcrystalline wax? Or looking for paraffin wax sales supplier. Just contact us!8466531899?profile=original

Read more…

Homo Polypropylene T30S

Features:

 

Application:

 

Applications of Homo pp t30s:

Items

Standard

Results

TestMethod

Granular apperance (black), (piece/kg)

0

0

SH/T 1541

Granular apperance (color), (piece/kg)

≤10

0

SH/T 1541

Granular apperance, (big size and small size), (g/kg)

≤10

5.4

SH/T 1541

Melt mass-flow rate (g/10min)

REPORT

4.7

GB/T3682

Isotactic Index(mass fraction)  %

≥95

97.0

GB/T2412

Ash content, (mg/kg)

REPORT

308.8

GB/T9345.1

Tensil yield strengh,  (MPa)

≥29

33.2

ASTMD638

Yellow index

≤4.0

-2.2

HG/T 3862

 

 

*Packing: 25kgs bag, 26MT/40' FCL

 

Supplying Form

 

Storage

 

Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.

Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.

Read more…

How to remove RTV silicone

How to remove rtv

For clothing stained with this RTV silicone, the silicone should be moistened with turpentine to soften it, and then removed with gasoline. For already dry spots, apply cream or artificial butter first, then wipe with gasoline or turpentine, then wipe with 10% ammonia until all the silicone are cleaned. You can also use turpentine to wet the silicone or apply a mixture of white porcelain clay and turpentine to the silicone. After 4 to 5 hours, the RTV silicone can be wiped off and washed with hot soapy water. In addition, the solvent chloroform, turpentine and a mixture of chloroform and carbon tetrachloride (1;1), and a mixture of diethyl ether and ethyl acetate (1;1) are  very effective in removing oil base and dry oil spot.

f:id:golohopolymer:20190825214134j:plain



Such stains on the dyed fabric are first wetted with a pure hot glycerin solution, and then pressed with a cotton ball which touches glycerin tightly on the stain (no rubbing is allowed, rubbing causes changes in the color around the stain).

For such stains on white clothing and non-fading clothing, use concentrated alcohol or concentrated alcohol and a mixture of 5% ammonia in water. When a colored wash stain remains on it, it should be treated with a 3% sodium dithionite solution. When the garment is white cotton and linen, it needs to be removed with an aqueous solution of bleaching powder or an aqueous solution of a mixture of bleaching powder and washing soda ash.

For such stains  on white clothing and non-fading clothing, use concentrated alcohol or concentrated alcohol and a mixture of 5% ammonia in water.  you should use 3% concentration of sodium dithionite solution to deal with when the dress is white cotton and linen, using aqueous solution of bleach or aqueous solution of bleach and washing soda ash mixture of removal.

Read more…

Get to Know How PoE Works

Many Internet connected devices, such as IP cameras, VoIP phones, WIFI radios, and Ip access card readers, use Power over Ethernet. A single network cable transmits data and power to the device, making installation simple. Data uses one set of wires, and power uses another set of wires in a network cable.
Get to Know How PoE Works
Devices that plug power into certain wire pairs in an Ethernet cable are called injectors or MIDSPAN. Use a separate power supply (injector) or use an Exchanger containing built-in PoE to inject power to an Ethernet cable. Many devices using PoE comply with the IEEE standard. But be careful. Some devices don't meet this standard. Before using PoE, it is important to know exactly what voltage and current is required for the device. Here's a review of the technology.
 

PoE Injector

In all cases, electricity is sent over a network line. In diagram A, power is supplied on the same wire as the signal. In Mode B configuration, power is provided through two sets of optional wires in the network cable.
The following figure shows the pattern a configuration. The power supply is provided by a Exchanger, which Exchanger includes a PoE on a port or an injector connected between the switch and the device.
 
Get to Know How PoE Works
PoE Mode A Diagram

 
The following figure shows the Mode B configuration. In this case, power from the switch or ejector is supplied on a separate network line. Many devices are designed to receive power using either mode a or mode B.
Get to Know How PoE Works
 
PoE Mode B Diagram

 
There are some passive PoE sources and there are “active” or “smart” type sources.  The “active” type communicates with the device. This provides device protection that can prevent damage caused by short circuits, as well as providing overcurrent and overvoltage protection. The passive PoE sources are less expensive and provide power without any verification from the device.
 
Power sources that conform to the IEEE standard include network switches individual or multiport PoE injectors (or midspans).
Get to Know How PoE Works
Read more…
img_595021a40a5ea.png

VMware normally creates "growable" disks, which start small and grow over time as you add data. However, you can also create "preallocated" disks that start at their maximum size. If you want to compact a disk later, you'll need to convert it from preallocated to growable. Or, you may want to convert a disk from growable to preallocated for maximum performance.

Beginner Geek: How to Create and Use Virtual Machines

You can only do this in VMware Fusion or VMware Workstation. VMware Player does not include the necessary command. VMware Player always creates growable disks that expand over time, and there's no way to convert to preallocated without using another VMware product.

VMware Fusion

This is very simple in VMware Fusion on a Mac. VMware Fusion always creates new virtual disks as growable disks. You can convert them to preallocated disks afterwards, or convert disks back to growable disks if you've previously converted them to preallocated disks.

To do this, first shut down the virtual machine. You can't convert its disks if it's powered on or suspended.

Select the virtual machine in the main VMware Fusion window and click Virtual Machine > Settings.

img_595004e14ba04.png

Click the "Hard Disk" option under Removable Devices in the Settings window.

If you want to rotate the screen in Windows, first you must be a Windows system user and have activated it. If you need you can check softkeyhome.co.uk to find windows product key online with the lowest price.

img_595004ed5659a.png

If you see a message saying you can't make these changes while your virtual machine has a snapshot, you'll first need to delete any snapshots you've created for your virtual machine. Of course, you won't be able to restore your virtual machine to its previous state at those points in time later.

img_595004f98f415.png

To delete snapshots, click Virtual Machine > Snapshots > Snapshots. Select each snapshot in the window and click the "Delete" button on the toolbar to delete each.

img_595004b3dded3.png

In the Hard Disk settings window, expand the "Advanced options" section. Check "Pre-allocate disk space" to convert the growable disk to a preallocated disk, or uncheck "Pre-allocate disk space" to convert a preallocated disk back to a growable disk. Click "Apply" to apply your changes afterwards.

img_595004a60c7dd.png

Read more…

How to make PivotTables in Excel

how-to-create-pivottables-main_thumb800.png

Excel has many powerful features, but one of the most helpful is PivotTables. We'll show you how to create PivotTables quickly and simply in Excel using tools built into Microsoft's Office suite.

How to make PivotTables in Excel: What is a PivotTable?

While it might sound like an avant-garde piece of designer furniture, a PivotTable is a data summary tool that can display information about large data sets in a customisable tabulated form. In simpler terms, it's a clever trick that shows you what you want to know about stuff you already have in your spreadsheets.

Say you have a large data set that includes a range of information about your business, and you want to know how much a certain project has cost or which salesperson has performed the best over a set period? To find this out you can either try dabbling with several formulas to generate these results, which could be complicated and time consuming, or you could create a PivotTable which does the hard work for you.

How to make a Pivot Table in Excel

Although the use of PivotTables can be complex, depending on just how deep you want to go, creating one is actually very easy. The first thing you need is a spreadsheet with data already present. Before you can start it's important to ensure that there are no empty fields, columns or rows, as the PivotTable will assume that the data to be included ends there.

When you have everything ready click on a cell in the data you want to summarise, it doesn't matter which one, then go up to the ribbon menu and select Insert.

If you want to rotate the screen in Windows, first you must be a Windows system user and have activated it. If you need you can check softkeyhome.co.uk to find microsoft project professional 2016 product key online with the lowest price.

how-to-create-pivottables-menu_thumb.png

The first option on the left should be PivotTable. Click this and you'll see that the data set has automatically been selected and a dialog box confirms the area that will be used for the PivotTable.

how-to-create-pivottables-1_thumb.png

Below the Table/Range box you'll see the options for creating the table in either a new worksheet or an existing one. For this walk-through we'll select New. Click OK and the PivotTable will be created.

How to use a PivotTable

Initially it might look like things haven't gone to plan, as the new worksheet is empty. This is meant to happen as one of the main advantages of PivotTables is that you can select which data fields you want to appear, and then change them as many times as you like to produce different reports.

how-to-create-pivottables-2_thumb.png

In the right-hand corner of the screen you'll see a list of fields you can choose to include. As you tick each box the PivotTable will begin to take shape in the main part of the screen.

When you add fields the PivotTable will order them into related areas which show the breakdown of the information. In our example we wanted to know the individual costs of the various assignments that our agents had undertaken, so by selecting those fields we quickly knew the exact amounts of each project and how much each agent had been awarded.

how-to-create-pivottables-3_thumb.png

That's all well and good, but now we want to know how much revenue each client has generated. In a traditional spreadsheet this might take a while, but PivotTables work very quickly indeed to collate the information. There's no need to create a new table, instead we untick the fields that we no longer need, and instead select the ones for the client, assignment, and amounts. Instantly the information is displayed in front of us. Very nice!

how-to-create-pivottables-4_thumb.png

As we said earlier, PivotTables can be very powerful if you dig deeper into the various options available in the ribbon menu. These advanced features would take up an article all of their own, so we won't be covering them today, but there is one area that it's worth exploring briefly - Design.

How to change the layout of a PivotTable in Excel

At the top of the ribbon menu you'll see the pink PivotTable Tools tab is highlighted. Directly underneath this are two more tabs - Options and Design - of which Options is currently selected. Click on Design and you'll see a far simpler set of tools appear.

In this menu you can shape how the information in the PivotTable is displayed. The first couple of options relate to whether you want Sub-Totals or Grand Totals in your table, but the one most people will want to start with is the Report Layout.

Clicking this opens up a drop down menu with a few basic alternatives for the layout of the table. Again this is all dynamic, so you can click through each option without ruining your report, then return to your preferred design at the end.

how-to-create-pivottables-7_thumb.png

Try spending a few minutes experimenting with the settings, until you're happy with the look and feel of your report.

There's plenty more you can do with PivotTables, but at least with these initial steps you can start exploring how they can be put to work for your own needs. You never know, there might even be a large sticky donut in store at the next office meeting as people gaze upon your techno-wizardry with wonder.

Read more…
8466502690?profile=original

Fast ring Insiders aren't having all of the fun today; the Slow ring is in for a treat, too.

Windows 10 preview build 16278 is now rolling out to Slow ring Insiders, less than a week after it first landed on the Fast ring. Microsoft is winding down development on the Fall Creators Update now, meaning no new features are expected to roll out. Instead, expect a lot of spit and polish, which is exactly what 16278 delivers.

Here's a recap of all of what's fixed in build 16278:

We fixed an issue where upgrading to recent flights would fail if you had a speech for a secondary language installed.

We fixed an issue where printing from 32-bit apps running on 64-bit versions of the OS was broken when using v3 print drivers on recent builds.

The ability to take HDR screenshots on your PC via the Xbox app has been removed starting with this build. We plan to re-introduce this feature again in the future.

If you want to rotate the screen in Windows, first you must be a Windows system user and have activated it. If you need you can check https://www.softkeyhome.co.uk/windows-10-product-key-c-57/ to find windows product key online with the lowest price.

We fixed an issue resulting in drag and drop onto websites intermittently not working in Microsoft Edge.

We fixed an issue where Microsoft Edge would crash after choosing to pin certain websites to Start.

We fixed an issue in Microsoft Edge for certain websites where after watching an embedded video full screen then using Esc to return to the page would result in the video controller no longer being visible.

This is one of several builds flighted by Microsoft within the past week. Earlier today, Fast ring Insiders got their own new build with 16281, and "Skip Ahead" Insiders were treated to the first Redstone 4 build to head into testing just yesterday.

Read more…

5 Tips to Jumpstart a New Business

  • Create a Brand. Spend a little money to create a professional logo, business card and stationery. Present a professional image.
  • Ramp up Online. Make creating a Web site a top priority. A Web site is today’s calling card, and you are operating below optimum level without one.  A website provides a place for people to go and learn about your business.
  • Make Your First Sale. Get that first sale even if it’s from friends or family at a discounted rate.

READ FULL ARTICLE - http://kbooker.wordpress.com/2013/10/07/5-tips-to-jumpstart-a-new-business/

Read more…

If   you   answered   YES”  to   any   of   these   questions,   Sponsoring   “Positioning You to Take Your Nonprofit to Levels Thought Unreachable” Seminar is the RIGHT decision for your organization!

On Saturday, September 14, 2013 Compu-Perfect Professional Services will help people start and manage nonprofit organizations that will provide services such as mentoring, leadership training, computer training, entrepreneurship to youth and adults.

Each seminar participant will leave with a boost of inspiration AND be exposed to YOUR product or service as a Sponsor of this empowering event!

Who Are We?

Compu-Perfect Professional Services is a consulting firm that has been which has been providing the following services for 18 years:

  • Business formation (Corporations, Limited Liability Companies (LLC’s) and Nonprofit Organizations)
  • Contract Drafting and Reviewing
  • Trademark Search and Registration
  • Completion of the 501(c)(3) application for nonprofit organizations
  • Grant Research and Writing

 Vision

“Move You on the Road to Success” by empowering you with knowledge of the intricacies of starting and managing businesses and nonprofit organizations.

Mission Statement

To provide quality consulting services for nonprofits that helps them to grow and adapt to the ever-changing nonprofit world. Having a Nonprofit Consultant is no longer a luxury, but a necessity.

Compu-Perfect helps nonprofits thrive by . . .

* Giving a fresh perspective about your nonprofit, which in turn will help your nonprofit move in a direction that will yield optimum efficiency

* Evaluating and identifying problem areas and helping you design solutions that will correct or eliminate these problem areas.

* Helping the nonprofit president have more time to devote to other business aspects such as board member and volunteer participation, and fundraising, which will in turn help alleviate some of the stress of day-to-day activities and procedures.

A NONPROFIT CONSULTANT will help you make your dreams come true, and help transform the lives of your target population.

A Word from the President

It is with great pleasure that I take this chance to offer your business a great opportunity to become a valuable sponsor of the “Positioning You to Take Your Nonprofit to Levels Thought Unreachable” Seminar, which will be held on Saturday, September 14, 2013. The objective of this event is to help workshop participants understand the benefits of starting and managing a nonprofit organization to help transform the lives of youth and adults so they become productive citizens.

As a valuable sponsor, your business will be publicized before and during the event. You will have the option to choose from any of our 3 levels of sponsorship for additional publicity and support.

For more details go to - http://howtostartanonprofitorganization.wordpress.com/2013/07/01/sponsorship/

Read more…

 

Have you ever wondered how to:

*  Connect with Powerful People

*  Build Stronger Relationships with Customers

*  Maximize Your Connections

I have the perfect solution for you – “Connecting Your Way to Real Relationships that Lead to Success” e-book.  On Sale for Only $9.99

 

Purchase Attorney Karmen A. Booker’s e-book “Connecting Your Way to Real Relationships that Lead to Success” and You Will Receive a FREE 15-Minute Business Consultation.

 

The FREE 15-Minute Business Consultation will provide you with valuable information that will provide a fresh perspective about your business, which in turn will help your business move in a direction that will yield optimum efficiency and greater profits. 

 

Purchase YOUR COPY TODAY – On Sale for Only $9.99 by clicking on this link - http://kbooker.wordpress.com/2013/03/15/connecting-your-way-to-real-relationships/

Call Attorney Booker at (301) 408-1082 to Schedule your FREE 15-Minute Business Consultation

Read more…

🔥Christian Music News