Blogs/News/PSAs

What is stabiliser 466？

Description of Food Grade CMC

Sodium carboxymethyl cellulose in food(CMC/cellulose gum) is kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC ( cmc emulsifier)is refined cotton and wood pulp. It is mostly used in the food industry with a common dosage of 0.2%-0.5%. Compared with other similar hydrocolloids, food-grade CMC is featured by strong acid resistance, high salt-resistance and good transparency, with very few free fibers, fast dissolving and good fluidity after dissolving.

The main function of stabilizer 466 is a thickener, stabilizer, tenacity strengthening agent, water retention agent, dispersing agent, binder, suspension, film-forming agent and so on in food and beverage processing, such as ice cream, juice, fruit jam, dairy products, beer, lactic acid drinks, yogurt, syrups, bakery products, wine, sauces, seasoning, meat products, etc.

Food grade CMC can control the size of crystal in frozen food, prevent stratification between oil and water. In an acid system, it has good suspension stability in acid-resistant food, can effectively improve solution stability and impedance capability of protein. Sodium carboxymethyl cellulose can improve taste and mouthfeel, reduce the syneresis of food, raise quality and prolong shelf life.

We classified carboxymethyl cellulose solubility into two types, type 6 and type 9. Type 6 is a common CMC (degree of substitution 0.75-0.9), and type 9 (degree of substitution more than 0.9) is acid-resistant with much better stability. The purity of our food grade carboxymethyl cellulose is much higher more than 99.5%, meeting GB1886.232-2016, E 466 and FCC IV standard. This is very important to guarantee food safety. We can produce food grade CMC as required specifications from ultra-low to very high viscosity.

Used as a food additive, the main function of food-grade CMC is as thickener, stabilizer, tenacity water retention agent, emulsifier, suspension, film-forming agent and so on. It can be applied in various food, like ice cream, juice, fruit jam, dairy products, beer, lactic acid drinks, yogurt, syrups, bakery products, wine, sauces, seasoning, meat products, etc.

Fortune Biotech food grade CMC totally conforms to the requirements of food sanitary and safe.

1. Thickening and taste improvement effect

Food grade CMC can produce higher viscosity at low concentrations, endow smooth texture to food.  The pseudo-plasticity effect of CMC brings refreshful and strong taste. Its good suspension stabilizing characters can make food keep the uniformity on odor, concentration, and taste.

2. Structure loosen effect

Good rheological and gel stable characteristics of food-grade CMC can prevent dehydration and shrinkage of food, can improve the expansivity rate of food. Reversibility between viscosity and temperature of CMC is good for the increase of food expansivity rate.

3. Suspending effect

Sodium carboxymethyl cellulose can be used as a suspending agent in different food. Have a good suspension bearing capacity. If mixing with agar, guar gum, etc, will get good compatibleness and tenacity strengthening the effect.

4. Water retention effect

Food grade CMC has good hydrophile and rehydration properties. It can reduce dehydration and shrinkage of food, prolong storage time. Water-holding property is applied to prevent water evaporation or non-crystallization of sugar.

5. Binding effect

Food grade CMC can improve performances of starch food (prevent starch aging, dehydration), control mash viscosity. Better effects if mixing with emulsifier, konjac gum, spermine diphosphate hexahydrate, so sodium carboxymethyl cellulose is widely used in noodles, bread, and frozen dessert, etc.

Food Grade CMC Specification:

Type 6-Common food grade CMC

Type 9-High resistance to acid food grade CMC

Other Main Parameters

Fortune Biotech is one of the most professional cellulose gum suppliers in the production field of carboxymethyl cellulose (CMC), with over 40 years' experience.

Eyeshadow palette custom packaging? Eye shadow is an important part of makeup. It enhances the eyelids and women's beauty. A lot of eye shadow brands are competing to excel from competitors and achieve a high position in the market. Eye shadow Packaging is vital for eye shadow as it enhances the beauty and aura of eye shadows. Women get attracted to eye shadow boxes which are colorful and artistically designed.

Paper eyeshadow packaging is available in different sizes and styles. You can customize the box by printing beautiful designs on eye shadows boxes to attract customers. The outer look of boxes is customized according to the theme of eye shadows like for earthly tones brown box is used and for light tones, pastel shade boxes are preferred. High-quality eye shadow packaging is vital for the protection of eye shadow from any mishandling. We leave no box unturned in facilitating you with packaging and printing services, plus the cardboard we use in manufacturing the eyeshadow boxes is durable and sturdy that allow safe shipping and transportation of your fragile products. You can also opt for natural Kraft material for your eyeshadow boxes that is lightweight and recyclable.

Your Best Choice for Eyeshadow Packaging

Eyeshadow packaging involves designing the boxes in a beautiful manner. Our expert designers always bring out unique, individual and flawless designs that stand out among the other boxes produced by our competitors. Eyeshadow packaging is then subjected to printing the logo of the brand on the boxes and product-related details which convince the customers about the worth and reliability of the eye shadow products.

The total procedure of making eyeshadow packaging that includes a selection of material, customization of the boxes and printing on it is very reasonably priced. Selling these eye shadow packaging makes the sales to grow rapidly.

Hope our custom packaging design that will fit your imaginable and unimaginable demands.Guangzhou Extra Link Printing & Packaging Co.,Ltd.is one of the most professional printing and packaging companies in China. We focus on every details from printing job to paper packaging hand working job is what we are always doing for years. If you are looking for wholesale eyeshadow packaging, just contact us!

Our Peanut Color Sorter technology

Function of Peanut Color Sorter

LINPRO AI peanut color sorter machine able to eliminate the defective peanut as below efficiently.
* peanut with black point     * rot peanut     * worm bited peanut
* immature peanut     * wrinkled peanut     * off skinned peanut

Application of Peanut Color Sorter

Our peanut color sorter machine suitable to adopt in different lines:
* peanut oil factory    * food processing plant which make peanut snakes  * Peanut acquisition processing plant


Please note: Usually voltage will be 220V/50HZ, if you need to change to 60HZ, please let us know.

If there is any question regarding how to choose a suitable sorter, please contact us any time.

Our service

1.What other equipments need to work with peanut color sorter machine?
Air production system:  *air compressor   *air tank   * air dryer
(You can also buy in local)

Auxiliary equipment:  * color sorter platform   * elevator    * big feed bin   * conveyor
(We can provide technical drawings to help you make in local; or you can purchase from us with peanut color sorter)

2.Can you send engineer to set the machine well in local?
Yes, we can.
*The color sorter machine will be installed well before delivery.
*We will send an engineer there to connect the whole color sorting line well.
*Our engineer will provide training in local about how to operate and maintenance your machine.

3. 1 Year warranty provided.

4. We provide software updated service to follow LINPRO rice color sorter' s new technology.

For more about the service and installation, please check from "Service" "Installation" from "Solutions".

For any questions about our peanut color sorting machine, please feel free to contact with us.

Multifunction articulated wheel loader is a new generation wheel loader developed and produced by Attack Global(HongKong) Co., Ltd., which can be used for material loading and unloading, short-distance transportation. This articulated wheel loader can be installed with various of attachments, which can achieve multi-purpose of lifting, traction, clamping, digging, and  drilling, raking the ground, weeding, feeding and so on, widely used in farm, ranch, infrastructure, road construction as well as stations, docks and other operating conditions. There are five models for choice, articulated front end loader design, more compact articulated wheel loaders are under development. Small articulated loaders for sale directly from ATTACK forklift manufacturer with very competitive price.

Copper-clad copperweld steel grounding material is a new material developed by Ningbo Zhenhai Beisuda Petrochemical Equipment Co.,Ltd. to replace pure copper. Copper clad ground wire has the following advantages:

With high strength

With low price

High corrosion resistance

High electrical conductivity of copper

GROUNDING GROUND CONDUCTORS

In recent years, the copper clad steel rod has been widely applied to UHV lines, petrochemicals, nuclear power, high-speed rail, especially key projects. Copper-clad steel: A material in which the surface of a steel core is uniformly coated with copper, including copper-clad steel bars (for vertical grounding only), copper-clad steel flat steel, and copper-clad steel wire (including copper-clad steel round wire and copper-clad steel stranded wire).

Zhejiang, it is a professional enterprice, who focus on production and sales of copper clad steel ground rod. We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future. 

Edible Liquid Salt Purification

Without adding flocculant, resistant to pollution, high filtration accuracy, stable &high quality refined brine.

Nanofiltration Systems Sulfate Removal

The membrane has charged groups that selectively reject multivalent anions such as sulfate ion.

Primary Brine Purification

Ceramic Brine Membrane Purification Solution (hereinafter called CBS Process).

JIANGSU JIUWU HI-TECH CO. LTD.,founded in 1997, focus on producing ceramic membrane for many years. And JIUWU HI-TECH has become a leading company in the membrane separation industry. We sincerely invite and welcome people from all around the world to invest and create more values together.

COMPANY PROFILE

GOLOHO POLYMER was established in 1995 which is the leading conglomerate in China specialized in industrial adhesive R&D and production. Our main products are organic silicone adhesive, silicone resin, epoxy resin and PU.

It has the leading technology platform and production process after more than twenty years' of development and technology accumulation. We execute critical quality management system.

There are factories and technical center in Shenzhen and Changzhou, Jiangsu. It has been accepted by serious premium brand customers.

GOLOHO POLYMER provides global customers the overall solutions with safe, reliable, innovative high-tech products and high-end service

HOUSEHOLD APPLIANCE ADHESIVE

There are many household appliances that need adhesive, for example:

white household appliances: air-condition, fridge, washing machine;

black household appliances: LCD;

kitchen appliances: wave-oven, induction cooker, electric oven;

small appliance: electric iron, vacuum cleaner, curling iron, etc.

ADHESIVE PROFILE

Air-condition

Protection of IC line in remote controller

Coat of outdoor machine PCB

Fix of outdoor machine PCB

Heat dissipate of outdoor controller

Bond with indoor display board

Coat of indoor machine PCB

Heat dissipate of IC controller

... ...

Fridge

Seal of case gap

Coat of PCB

... ...

Washing machine

Waterproof Encapsulant of PCB

Coat of PCB

... ...

Wave/electric-oven

Heat dissipate of controller

Seal floors

Seal video windows

Coat of PCB

... ...

Induction cooker

Seal cases

Heat dissipate of IC controller

... ...

Electric iron

Bond with floors

Seal covers

... ...

Display

Protection of electrode

Fix of PCB cases

Heat dissipate of IC controller

... ...

ENCAPSULANT

Notes: at 25℃ except for 8302 at 60℃ 

ADHESIVE

THERMAL CONDUCTIVE SILICONE

THERMAL CONDUCTIVE SILICONE GREASE

CONFORMAL COATING

GOLOHO POLYMER is an industry leader in the production field of rtv grease. If you want to know more details or want a quotation, just feel free to contact us!

Coconut oil aminopropyl betaine(CAPB)can be extracted from coconut oil and dimethylaminopropylamine. CAPB is a surfactant. It can be added to personal care products or used in bath products such as shampoo and soap for washing hands. It's also an organic compound. And you can see from its name that the main part of its molecule, the lauric acid group, comes from coconut oil. CAPB is a medium-strength surfactant that can also be used in cosmetics and has an emulsifying and thickening effect. It can also be used as an antistatic agent in hair toners that do not irritate the skin or mucous membranes. It is also added to personal hygiene products as a preservative.

Lipophilic, lipophilic and hydrophilic properties are chemical properties of surfactants, so surfactants can remove dirt and oil from the skin. Surfactants can reduce the surface tension of water, making it easier to wet, thus removing oil and dirt from the skin. So it's also a detergent

Some surfactants are very irritant to the skin, but coconut oil aminopropyl betaine usually does not irritate the skin. So the coconut oil aminopropyl betaine is added to baby soap and shampoo. Because of the thickening and foaming properties of coconut oil aminopropyl betaine, it helps to moisturize the skin. It is generally used as a cleaner. However, some people are sensitive skin and may have an allergic reaction to the compound. So using cosmetics that contain coconut oil, amide propyl betaine, can cause red, itchy or peeling skin, It could be that surfactants can cause contact dermatitis. See a dermatologist. 

If you are looking for cocoamidopropyl betaine China, just contact us!

The custom army rack builder has been widely used to instead the piles of heavy large medals in the military activities or decoration. As the professional and experienced military related metal crafts supplier, Dong Hong has been producing this kind of custom army rack builder with badges for many years already. With our continuous practice, researching and developing, we found our own method to guarantee the quality.

What’s more, we’ve also created some existed moulds on the metal frame part for the client’s selection which is with standard size but could help to save the expensive mould charge accordingly. Especially for the client who require small QTY army rack builder, the existed mould would be pretty helpful on its budget.

 Specifications of our custom army rack builder

• The standard size of each single The custom army rack builder could be 32mm, 63mm, 98mm wide and 8.2mm high.
• The standard attachment for the custom army rack builder is generally fushion nail and military clutch.
• The color of the custom army rack builder could be customized according to your requirement. You can just inform us the relative PMS number and design of the ribbons you want and we’ll dye the yarns accordingly.
• If you want to add any logo on this kind of The custom army rack builder, the logo presentation way could be just the printing, the different color combination, or even the metal logo assembled.
• The plating of the custom army rack builder would be generally gold or nickel even though we could offer different plating options but because of its special usage, the client would generally require gold or nickel only. But the decorative metal logo on the top of the custom army rack builder could be more colorful accordingly.

Thick Copper PCB Difinition and Thickness

There is no exact definition of thick copper in the PCB industry. Generally, the copper thickness ≥ 2oz is defined as Heavy copper PCB. Heavy copper PCB is mainly used in high-current electronic products. High-current electronic products are generally high-power or high-voltage PCBs. They are mostly used in automotive electronics, communication equipment, aerospace, planar transformers, and secondary power modules.

Our thickest copper PCB can make 6 ounces. However, considering the side eclipse factor, copper thickness of more than 3 ounces should pay special attention to the line width of the inner layer.

Inner 3 oz copper pcb: line width 6/7 mil outer 3 ounces: line width 8/12 mil

Inner layer 4 oz copper pcb: line width line spacing 8/11 mil outer layer 3 ounces: line width line spacing 9/15 mil

Inner 5 oz copper pcb: line width 10/16 mil outer 3 ounces: line width 11/16 mil

Inner 6 oz copper pcb: line width line spacing 12/18 mil outer layer 3 ounces: line width line spacing 14/18 mil

Heavy Copper PCB Production Difficulties

1. If the etching is not clean during the etching process, the pressure will not reach the standard, and if it is serious, it will cause the line to short-circuit.
2. Heavy Copper PCB dense lines are prone to foaming during solder mask ink fabrication
3. Heavy Copper PCB has the highest scrap rate in the inner layer of the drilling process, the hole is thick, the nail head is the highest.
4. In the pressing process, it is easy to have insufficient glue filling, excessive flow glue, uneven thickness, void and so on.

When the electronic device need high power or current through, Then we need consider heave copper to control the thermal on PCB, Thermal management is more important than ever today as electronics are used in demanding environments and Operative at higher currents. Heavy copper PCBs (copper conductors 5 oz/ft2 – 19 oz/ft2 in inner And/or outer layers; sometimes defined as more than 4 oz per square foot (ft2)) can help conduct heat away from components so failure is greatly reduced. PCB manufacturers create durable wiring platforms with heavy copper. And boards may be manufactured in a smaller footprint as they can contain multiple weights of copper on the same circuit layers.

The Benefits of Heavy Copper PCBs include: Reduction of Thermal Strain

1. Better current conductivity
2. Can travelers repeated thermal cycling
3. Smaller PCB size due to layering of copper
4. Increased connector site strength

Welcome to custom Thick Copper PCB Board directly from Heavy Copper PCB Manufacturer at low cost.

A turnstile, also called a baffle gate or turnstyle gate, is a form of gate which allows one person to pass at a time. It can also be made so as to enforce one-way traffic of people, and in addition, it can restrict passage only to people who insert a coin, a ticket, a pass, or similar. Thus a turnstyle or turnstile can be used in the case of paid access (sometimes called a faregate or ticket barrier when used for this purpose), for example to access public transport, a pay toilet. There are types of turnstyle gates for different occassions and access control demand including tripod turnstiles, swing turnstiles, flap turnstiles, speed gates, full height turnstile and so on. ZOJE pedestrian turnstile gates support face recognition and fingerprint.

ZOJE have profeesional design engineer to customize as your project.And we have various turnstiles for sale! Know better, do better!

Tripod Turnstiles

Tripod turnstile gates are equipped with 3 revolving arms which can effectively prevent tailgating.

Swing Turnstiles

Swing turnstile gates are the most cost-efficient way to ensure secure and welcoming entry and exit control.

Flap Turnstiles

Flap barrier turnstiles are electronic optical turnstiles with glass panels (or flaps). They utilize optical infrared components for high sensitivity access control.

Speed Gates

Speed gates provide convenient, fast, and secure access. They are commonly applied to business buildings.

Full Height Turnstiles

Full-height turnstiles are used for indoor or outdoor applications within project of highest security need.

Others

A number of other rare turnstile gates are also available, such as sliding doors and drop arm turnstiles.

Philippines import export data actually provided by government customs, Filter by products, shipment dates, ports, country of origin and more

1200 Million Buyers List Expand More Potential Customers Quickly

Our database has more than 130 million traceable companies, allows you to quickly find buyers and suppliers who export the exact targets you need, also including key decision makers name, email, phone, social media, etc... At the same time, we also send potential customers in the supply chain, such as factories, distributors, engineering companies and shopping malls.

List of Purchasers

Find qualified detailed importers and exporters in seconds

Advanced search on10 billion shipment records; Confirm whether shipments are going up or down; Use data to determine health of company

Target Market Analysis PIi

Detailed charts and data views for Philippines

More than 19 professional reports, used to analyze buyers, suppliers, product sales distribution, etc. in the Philippines market, ahead of your competitors and know yourself more

Target Market Analysis

We are professional import export data provider,RFQ today!

GK2150 Raymond Mill Technical & Structural Benefits:

This High Pressure Suspension Mill has high output, high-efficiency, and energy saving. It has small floor area and saves workshop.

The innovative design of the "maintenance-free device" for roller assembly, Refill grease every 30 days.

Large conveying capacity: Blower adopts high-pressure centrifugal fan to increase air volume and air pressure, so as to greatly improve the ability of pneumatic conveying.

Optimize inside design of the main unit, keep the roller and grinding ring abutting contact during running, improve grinding efficiency and operational reliability, and reduce the high failure rate of vertical pendulum grinding mill.

Equipped with water cooling structure for reducer of the main unit. Reducer adopts German technology.

High classifying accuracy: Classifier adopts built-in large taper blade turbine classifier.

No need to disassemble the spare parts such as cinquefoil shelf. More convenient for maintenance.

Energy-conservation & Environment-protection: Equipped with pulse dust collector in surplus wind outlet, collection-efficiency is as high as 99.9% to keep workshop environmental health.

Automatic control for air blower valve, reduce operating labor intensity.

Integral installation of air blower, water cooling system ensures running efficiency.

Running more smoothly, low noise, energy saving.

Intelligent control. The one button start and stop system and fault alarm system reduce operating personnel.

Product Name: 100ml Plastic Medicines Bottles (100ml Plastic Bottles)

Material: The bottle body is made of PET materials, the cap is made of PP materials.

Capacity: 100ml

Slogan: Convenient and beautiful, good experience

Convenient and beautiful, good experience

Introduction:

This plastic medicine bottle is used to separate liquid medicine, especially cough syrup, oral liquid, and other liquid medicine.

Materials:

There are two types of bottle materials. One is PET material, which is used as the bottle body and is non-toxic and environmentally friendly. PET material is an excellent packaging product, which can guarantee that the medicine will not be affected by moisture during the effective period and will not deteriorate at the same time.

Another material is PP material, which is mainly used for bottle caps. This PP material has good sealing and permeability, and this material can prevent the effects of light, heat, water vapor, oxygen and other materials on drugs. The total capacity of the bottle is 100ml, and the color is transparent. The bottle looks beautiful and generous.

Advantages:

At the same time, the body of the bottle is carefully designed, and the cylindrical shape of the bottle is designed in line with people's usage habits. Such a design can bring good experience for users. In addition, the accurate scale design on the bottle is convenient for the user to check the remaining amount when using, and the accurate scale design is conducive to the user to grasp the usage amount of medicine accurately.

The empty plastic bottles 100ml is healthy and safe on the material. The safety of the material can guarantee that the plastic medicine bottle will not damage the medicine's efficacy when it comes into direct contact with the medicine. In terms of appearance design, at the same time, the plastic medicine bottle takes into full consideration of people's usage habits. This plastic medicine bottle is convenient for people to use in two aspects, shape and in scale. As a result, this plastic medicine bottle is very delicate in material, and the design of this plastic medicine bottle is also very delicate.

If you are looking for excellent 100ml plastic bottles wholesale, just contact us!

Brand: K123 Keytech     SKU: KET-002

Qi wireless charging lamp

Overview

Metal lamp arm, make the appearance look more upscale

The lamp arm can rotate to multiple angles, so it is easy to use.

You can charge it on your phone

With the wireless charging function, you can use the wireless charging function to charge the mobile phone, or you can choose to connect the USB data line to charge the mobile phone. Of course, you can also charge two mobile phones at the same time.

The brightness of the lights can be adjusted

LED light, clear lighting, according to your needs to adjust the brightness of light. Suitable for lighting and reading.

Can be remotely controlled

You can start it with a touch of your hand, or you can control it with a mobile phone. It's more convenient to control the light with a mobile phone.

Sepecifications of neodymium bar magnets

We have magnetic plates for sale, just contact us!

Smart homes have flourished around the world and have become the mainstream of development in the 21st century. Smart home is a product of modern building technology, modern communication technology, modern control technology, modern instrumentation technology and modern computer technology. In recent years, with the rapid development of computer network communication technology and the improvement of people's living environment requirements, the concept of "intelligence" has also been introduced into the construction of housing. "Smart" now brings a lot of delusions to the industry.

Smart homes are based on housing, as long as they are residential, hotels, office buildings, enterprises, factories, schools, etc., are our target markets.

The pir sensor home automation seems to be far away from our lives, just a performance in high-tech exhibitions, or a home decoration that the rich show off to show off wealth. In fact, in recent years, smart homes have begun to step into more and more ordinary families. A complete intelligent security system using pir sensor   generally includes several subsystems such as security, telephone, audio and video, air conditioning, lighting, etc. The price can be accepted by consumers. The owner can choose to install subsystems according to their own needs and preferences to meet their own needs. Various needs at home. With the rapid development of the Internet of Things, smart homes have entered the ordinary people's homes, and the intelligent life style of film bridges is no longer far away.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

BKNFX-11 bolt eddy current sorter is suitable for high-strength bolt heat treatment state, crack, wrong thread anchor, and mixture sorting.

The shape of bolt:

Generally, the countersunk head is used where the surface is smooth and does not protrude after the connection is required because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rods, which can not loosen the bolt when it is vibrated. Some bolts without threads are to be thin, called thin waist bolts. This type of bolt facilitates the coupling of the force. There are special high-strength bolts on the steel structure, the head will be larger and the size will change.

In addition, there are special uses: T-slot bolts, the most used on machine tool fixtures, special shape, cut off both sides of the head. Anchor bolts for machine and floor attachments are available in a wide variety of shapes. U-bolts, as mentioned above. and many more. There is also a special stud for welding. One end has a thread and one end is not welded. It can be welded to the part and the other side can be directly screwed.

Bolt Vortex Sort BKNFX-11 Brief

1. Non-destructive testing, no special requirements for workpiece surface. (Avoiding the defect that the traditional detection method needs to destroy the surface state of the workpiece, and only two standard samples are prepared in the same material and workpiece when debugging the instrument.)

2. Fast, accurate and convenient. (The test only needs to put the workpiece into the probe, the efficiency is several times or even hundreds of times of the traditional detection method. For the qualified parts and the unqualified with the sound and light alarm function).

3. High sensitivity. (The voltage and frequency used by different materials and heat-treated parts are continuously adjustable)

4. Simple operation. (The man-machine dialogue function is set inside the instrument)

5. Visual display. The software compiled by the WINDOWS operation platform makes the instrument more convenient and intelligent.

6. Suitable for large-scale testing needs, to ensure product quality. (100% of the raw materials and finished products can be tested, instead of the conventional sampling test)

Sorting accuracy

1. Rockwell hardness (+2HRC)     

2. 100% sorting of material mixtures

3. Crack length * width * depth (5 * 0.05 * 1mm)

Nanjing BOKENA Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is one of the most professional ndt testing equipment suppliers in China. We sincerely invite and welcome people from all around the world to invest and create more values together.

Overview of Ceramic Metal Halide 315w

Specially designed for CMH 315W lamp

Runs on 120V/240V

High efficiency electronic ballast

High output and improved spectrum

Warranty: 3 years

UL & ETL Certified

The Details of 315W CMH Reflector Grow Light Fixture

Imported German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with ceramic metal halide 315W lamp that offers full spectrum light, much closer to natural sunlight than the lights delivered by normal HID lamps.

315W cosmo Lampholder

Matched power cord included

The Advantages of 315W Grow Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

The Specification of 315W CMH Grow Light Fixture

Technical data

HP Series

Performance characteristics：High energy, high power series

Typical application of high energy Capacitor：RAM、Detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive, clock circuit, UPS, toy, program-controlled switch, etc.

3v Supercapacitor Series specification sheet：

3.0V Series products

Typical Application 

As one of the most professional supercapacitor suppliers of china super capacitor, we have been devoting ourselves in providing high quality supercapacitor ultracapacitor with competitive price. If you want to buy super capacitor, don’t hesitate to contact.