Blogs/News/PSAs

Is epoxy glue heat resistant?

1. Epoxy resin AB adhesive classification: can be divided into epoxy resin filling adhesive, epoxy resin thermal conductive adhesive, epoxy resin sealant, epoxy resin high temperature adhesive, epoxy resin fast-drying adhesive.

2. Heat resistant epoxy glue is a fast curing series, clear and viscous epoxy resin adhesive. It can be cured at low or normal temperature with fast curing speed. After curing, the bonding strength is high, the hardness is good and the resistance is good. After curing, it has good acid and alkali resistance, moisture-proof, waterproof, oil-proof and dust-proof functions, moisture-heat resistance and atmospheric aging resistance. After curing, it has excellent electrical and physical properties of insulation, compression, bonding strength. So how high temperature can the epoxy resin AB resist? For different product processes, the temperature resistance is also different, 100 degrees, 200 degrees, 300 degrees, 1000 degrees and so on.

Jiaxing Nanyang Wanshixing Chemical Co. Ltd covers an area of 4 acres with more than 60 employees. We have four advanced production lines and our annual production capacity is 30000 tons, is the largest manufacturer of methyltetrahydrophthalic anhydride in China. We sincerely invite and welcome people from all around the world to invest and create more values together.

Methyl acetate is mainly used to replace acetone, butanone, ethyl acetate, cyclopentane and other traditional solvents. It can be miscible with most organic solvents and is widely used as industrial solvents. As a new organic solvent, methyl acetate belongs to the organic solvent which is not restricted to use in the world. It can meet the new environmental protection standards of paint, ink, resin and adhesives factories. It belongs to the green environmental protection products encouraged by the national industrial policy.

First, product characteristics

1. It can dissolve with most organic solvents.
2. It has wide solubility and can dissolve acrylic acid, vinyl, nitrocellulose, epoxy, polyurethane, polyester, phenolic resin, etc.
3. It has higher flash point and higher whitening resistance than acetone, and can better meet the requirements of coatings, paint formulations and users.
4. The application of ethyl acetate, acetone and butanone can be replaced in the process formulation requiring the use of low boiling point volatile organic solvents.
5. Polyurethane shoe materials can replace cyclopentane and chlorofluorocarbons as environmental friendly foaming agents.
6. There is a big price difference with acetone and butanone, which is conducive to the cost reduction of leather, coatings and adhesives manufacturers.
7. The solubility of nitrated sponge is similar to acetone, butanone, which is 4.5 times than that of toluene, 3.4 times than that of ethyl acetate and 2.7 times than that of butyl acetate.

Second, main uses

1. Used as an intermediate in the production of medicine and pesticides. The market basically uses methyl acetate.
2. Organic solvents needed in the production of resins, coatings, inks, paints and adhesives: methyl acetate has strong solubility and is an excellent organic solvent. As a solvent in the above industries, it has the advantage of forming a solution with lower viscosity than ethyl acetate in a certain solid component.
3. It can also be used as an oil extractant and used in the manufacture of artificial leather, etc. Methyl acetate is commonly used in the market.
4. In the application of flavor, it can be used in daily flavors, but it is mainly used in the blending of food flavors, and more refined methyl acetate is used.
5. Used to synthesize acetic acid, acetic anhydride, methyl acrylate, vinyl acetate and acetamide. High purity methyl acetate is used as organic raw material in the market.

PROSPER CHEMICALS has methyl acetate for sale!  The above is the content about methyl acetate we shared with you. Our company is a methyl acetate manufacturer. If you need it, welcome to choose and buy it.

The hydroxyethyl methyl acrylate is used as an additive for lubricating oil washing in oil and grease industry. It is used as a dehydrating agent for electron microscopy in the electronic industry. Adhesives used in textile industry to make fabrics. It is used as a chemical reagent in analytical chemistry. In addition, it is also used as an embedding agent for water miscibility.

Matters needing attention:

Toxicity protection:

Hydroxyethyl methyl acrylate has certain toxicity. Rat oral LD50 is 1.0g/kg. After inhalation, it has obvious stimulating effect. Skin irritation is mild, but eye injury is serious. Operators should wear protective glasses.

Toxicity:

It has certain toxicity. Rat oral LD50 is 1.0g/kg. After inhalation, it has obvious stimulating effect. Skin irritation is mild, but eye injury is serious. Operators should wear protective glasses.

Packaging, storage and transportation:

Galvanized iron drum packaging. Store in a cool and ventilated place. Warehouses should be dedicated and not mixed with other items. We should prevent the fire. Polymer inhibitors should be used before storage and transportation.

Storage and transportation methods:

[Notes for operation] Closed operation, local ventilation. Prevent steam from leaking into the air of the workplace. Operators must be specially trained and strictly abide by the operating rules. Keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. No welding, cutting and other operations can be carried out before removing liquid and vapor. Avoid smoke. Avoid contact with oxidants, acids and bases. Containers and conveyors should be grounded to prevent static electricity. When filling, flow rate should be controlled and grounding device should be provided to prevent electrostatic accumulation. It is equipped with the corresponding variety and quantity of fire fighting equipment and leakage emergency treatment equipment. Empty containers may retain harmful substances.

[Storage precautions] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Prevent direct sunlight. Keep the containers sealed and do not contact with air. It should be stored separately from oxidants, acids and alkalis. Mixed storage should not be allowed.

Applications and uses:

The plastic industry is used to produce acrylic resin containing active hydroxyl groups. Coatings industry is used to prepare two-component coatings with epoxy resin, diisocyanate, melamine formaldehyde resin, etc. In the grease industry, it is used as an additive for lubricating oil washing. In the electronics industry, it is used as a dehydration agent for electron microscopes. Adhesives are used in textile industry to make fabrics. Used as a chemical reagent in analytical chemistry. In addition, it is also used as an embedding agent for water miscibility.

HENAN PROSPER CHEMICALS CO., LTD was established in 2000, is the professional and comprehensive producer and distributor of chemical products in China. Welcome to contact us for more information or get quotation!

Tibolone Basic Info

Product name: Tibolone

Alias: LIVIELLA; LIVIAL

CAS: 5630-53-5

EINECS: 227-069-1

Assay: 99% min.

MF: C21H28O2

MW: 312.45

Appearance: White or off-white crystal powder

Grade: Pharmaceutical Grade

Storage: Shading, confined preservation

Usage: It is a synthetic hormone-type drug which is used mainly for hormone replacement therapy in post-menopausal women.

Tibolone Product Detail

Tibolone, sold under the brand names Livial and Tibofem among others, is a medication which is used in menopausal hormone therapy and in the treatment of postmenopausal osteoporosis and endometriosis. The medication is available alone and is not formulated or used in combination with other medications. It is taken by mouth.

Side effects of tibolone include acne and increased hair growth among others. Tibolone is a synthetic steroid with weak estrogenic, progestogenic, and androgenic activity, and hence is an agonist of the estrogen, progesterone, and androgen receptors. It is a prodrug of several metabolites. The estrogenic effects of tibolone are selective to certain tissues, with such effects in bone, the vagina, and the brain, but not in the uterus, breast, or liver.

Tibolone was developed in the 1960s and was introduced for medical use in 1988. It is marketed widely throughout the world, for instance in Europe. The medication is notably not available in the United States or Canada. It is a controlled substance in Canada, with the classification of an anabolic steroid.

Tibolone Application

All the information we provide is for reference only, please use drugs according to professional advice

Tibolone is used in the treatment of menopausal symptoms like hot flashes and vaginal atrophy, postmenopausal osteoporosis, and endometriosis. It has similar or greater effectiveness compared to older menopausal hormone therapy medications, but shares a similar side effect profile. It has also been investigated as a possible treatment for female sexual dysfunction.

Tibolone reduces hot flashes, prevents bone loss, improves vaginal atrophy and urogenital symptoms (e.g., vaginal dryness, dyspareunia), and has positive effects on mood and sexual function.The medication may have greater benefits on libido than standard menopausal hormone therapy, which may be related to its androgenic effects. It does not cause increased endometrial proliferation and is associated with low rates of vaginal bleeding and breast pain.

A 2015 network meta-analysis of randomized controlled trials found that tibolone was associated with a significantly decreased risk of breast cancer (RR = 0.317). The decrease in risk was greater than that observed with most of the aromatase inhibitors and selective estrogen receptor modulators that were included in the analysis. However, paradoxically, other research has found evidence supporting an increased risk of breast cancer with tibolone.

Tibolone Side Effects And Prevention

A report in September 2009 from Health and Human Services' Agency for Healthcare Research and Quality suggests that tamoxifen, raloxifene, and tibolone weight loss used to reduce the risk of breast cancer significantly reduce the occurrence of invasive breast cancer in midlife and older women, but also increase the risk of adverse effects.

Tibolone can produce androgenic side effects such as acne and increased facial hair growth. These side effects have been found to occur in 3 to 6% of treated women.

A 2016 Cochrane review has been published on the short-term and long-term effects of tibolone, including adverse effects.

Tibolone Order Process

1. email or whatsapp us about what you need,quantity and destination.

2. we would answer your email in 12 hours with our best price.

3. If you think the price is workable, we would send you our payment information.

4. After we received your payment ,we would arrange the shipping for you

5. You would receive our package in 7-10 working days.

Tibolone Our Advantage

1. Top Quality in the market, most product have the purity of 98%+ and some beyond 99%

2. Competitive price, we offer speical discount for large amount order.

3. Fast shipping ,we would deliver your product in 7-10 working days.

4. Free Re-shipping, we promise that you will receive your package

6. Security, we will not transfer any of your info to any third party.

Do you want to buy cationic surfactant?

Cationic surfactants are mainly nitrogen-containing organic amine derivatives. Since the nitrogen atoms in their molecules contain lone pair electrons, they can bind hydrogen with hydrogen molecules in the acid molecule and bring the amino group to positive charge. Therefore, they have good surface activity in acidic media; they easily precipitate in alkaline media and lose surface activity. In addition to nitrogen-containing cationic surfactants, there are also a small number of cationic surfactants containing elements such as sulfur, phosphorus, and arsenic.

Palmity Tri-methyl Ammonium Chloride

Chemical Formula: C21H46ClN

CAS No.:112-02-7

Dangerous Grade: Non-dangerous

Stearyl Tri-methyl Ammonium Chloride

Chemical Formula: C21H46ClN

CAS No.: 112-03-8

Dangerous Grade: Non-dangerous

Cationic surfactants have a long history of industrial use, and demand has been increasing rapidly year by year, but due to its special use as fungicides, fiber softeners and antistatic agents, it has a small demand compared to anionic and non-ionic surfactants. The development and use of cationic surfactants in China started very late, but its development rate is faster.However, due to the narrow range of application of cationic surfactants and the small amount of use, the output is very small. Until 2002, the annual output was still only a few thousand tons, which was less than 1% of the total output of various surfactants.

Cationic surfactants generally have good emulsifying, wetting, washing, sterilizing, softening, antistatic and anti-corrosive properties. Due to their special properties and applications, they have a good development potential both in industrial and civil applications.

Cationic surfactants have good bactericidal, softening, anti-static, anti-corrosive, and certain emulsifying and wetting properties, and are often used as phase transfer catalysts. However, such surfactants are rarely used as detergents alone because many substrates are usually negative in aqueous solutions, especially alkaline aqueous solutions. In addition, the main application areas of these surfactants are not like other surfactants, which are used to reduce the surface tension,  its structural characteristics make them used for other special aspects. Based on the chemical structure of cationic surfactants, they can be divided into four types: amine salt type, quaternary ammonium salt type, heterocyclic type, and barium salt type.

If you are looking for cationic surfactant in China, just contact us!

Features of 1 3 propanesultone electronic

Product Name: 1,3-Propane Sultone

Chemical Formula: C3H6O3S

Cas 1120-71-4

Dangerous Grade: 6.1

Technical Data of 1,3-Propane Sultone

Package and Storage:

25kg/plastic drum

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Application /Application Industries:

general-purpose sulfonating agent

pharmaceutical intermediate

surfactant

brightener

dyes

lithium batteries (electronic grade)

biochemistry

textile

lubrication

wastewater treatment

The hydroxyethyl methyl acrylate is used as an additive for lubricating oil washing in oil and grease industry. It is used as a dehydrating agent for electron microscopy in the electronic industry. Adhesives used in textile industry to make fabrics. It is used as a chemical reagent in analytical chemistry. In addition, it is also used as an embedding agent for water miscibility.

Matters needing attention:

Toxicity protection:

Hydroxyethyl methyl acrylate has certain toxicity. Rat oral LD50 is 1.0g/kg. After inhalation, it has obvious stimulating effect. Skin irritation is mild, but eye injury is serious. Operators should wear protective glasses.

Toxicity:

It has certain toxicity. Rat oral LD50 is 1.0g/kg. After inhalation, it has obvious stimulating effect. Skin irritation is mild, but eye injury is serious. Operators should wear protective glasses.

Packaging, storage and transportation:

Galvanized iron drum packaging. Store in a cool and ventilated place. Warehouses should be dedicated and not mixed with other items. We should prevent the fire. Polymer inhibitors should be used before storage and transportation.

Storage and transportation methods:

[Notes for operation] Closed operation, local ventilation. Prevent steam from leaking into the air of the workplace. Operators must be specially trained and strictly abide by the operating rules. Keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. No welding, cutting and other operations can be carried out before removing liquid and vapor. Avoid smoke. Avoid contact with oxidants, acids and bases. Containers and conveyors should be grounded to prevent static electricity. When filling, flow rate should be controlled and grounding device should be provided to prevent electrostatic accumulation. It is equipped with the corresponding variety and quantity of fire fighting equipment and leakage emergency treatment equipment. Empty containers may retain harmful substances.

[Storage precautions] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Prevent direct sunlight. Keep the containers sealed and do not contact with air. It should be stored separately from oxidants, acids and alkalis. Mixed storage should not be allowed.

Applications and uses:

The plastic industry is used to produce acrylic resin containing active hydroxyl groups. Coatings industry is used to prepare two-component coatings with epoxy resin, diisocyanate, melamine formaldehyde resin, etc. In the grease industry, it is used as an additive for lubricating oil washing. In the electronics industry, it is used as a dehydration agent for electron microscopes. Adhesives are used in textile industry to make fabrics. Used as a chemical reagent in analytical chemistry. In addition, it is also used as an embedding agent for water miscibility.

Uses of MMA

Methyl methacrylate is a volatile synthetic chemical that is used principally in the production of cast acrylic sheet, acrylic emulsions, and moulding and extrusion resins.

In the manufacture of methacrylate resins and plastics. Methyl methacrylate is transesterified into higher methacrylates such as n-butyl methacrylate or 2-ethylhexyl methacrylate.

methyl methacrylate monomer is used in the production of methylmethacrylate polymers and copolymers, polymers and copolymers are also used in waterborne, solvent, and undissolved surface coatings, adhesives, sealants, leather and paper coatings, inks, floor polishes, textile finishes, dental prostheses, surgical bone cements, and leaded acrylic radiation shields and in the preparation of synthetic fingernails and orthotic shoe inserts. Methyl methacrylate is also used as a starting material to manufacture other esters of methacrylic acid.

Granules for injection and extrusion blow moulding which for their outstanding optical clarity, weathering and scratch resistance are used in lighting, office equipment and electronics (cell phone displays and hi-fi equipment), building and construction (glazing and window frames), contemporary design (furniture, jewellery and tableware), cars and transportation (lights and instrument panels), health and safety (jars and test tubes) and household appliances (microwave oven doors and mixer bowls).

Impact modifiers for clear rigid polyvinyl chloride.

CAS Number: 80-62-6

 Methyl methacrylate (MMA) is used in the manufacture of polymethyl methacrylate (PM-MA), coatings, lubricant additives, wood sizing agents, paper polishes, etc.

 MMA is not only an organic chemical raw material, but also can be directly applied as a chemical product. As an organic chemical raw material, it is mainly used in the production of PM-MA and also used in the manufacture of polyvinyl chloride additive ACR and as a second monomer in the production of acrylic fibers. In addition, it has been widely used in adhesives, coatings, resins, textiles, papermaking and other industries. As a chemical product, it can be directly applied to leather, ion exchange resin, paper polish, textile auxiliaries, leather treatment agents, lubricating oil additives, crude oil pour point depressants, wood and soft wood sizing agents, motor coils permeabilizers, insulating and potting materials, and plasticizers for plastic type emulsions, floor polishing, unsaturated resin modification, higher esters of methacrylic acid, and many other fields.

 MMA is used as an organic synthetic monomer and in the manufacture of other resins, plastics, coatings, adhesives, scale inhibitors, lubricants, wood infiltrants, motor coil impregnants, paper polishes, auxiliaries for printing and dyeing, and insulating potting materials.

 As a monomer for PM-MA, it is also used in the manufacture of other resins, plastics, coatings, adhesives, lubricants, wood and cork sizing agents, and paper polishing agents.

Precautions for storage of MMA

MMA is usually mixed with polymerization inhibitors. It should be stored in cool ventilated warehouses and kept away from fire, heat sources, and light. The temperature in warehouses should not exceed 37°C. It requires to sealed in packaging and must not come into contact with air. It should be stored separately with oxidants, acids, alkalis, halogens, etc. to avoid mixing. It is not suitable for large-scale or long-term storage. Use explosion-proof lighting and ventilation facilities and do not use mechanical equipment and tools that are prone to generate sparks. In its storage areas, spill treatment equipment and suitable containment materials should be prepared.

 Uses of  Methyl Methacrylate (MMA)

 Methyl methacrylate is a volatile synthetic chemical that is used principally in the production of cast acrylic sheet, acrylic emulsions, and moulding and extrusion resins.

 In the manufacture of methacrylate resins and plastics. Methyl methacrylate is transesterified into higher methacrylates such as n-butyl methacrylate or 2-ethylhexyl methacrylate.

 methyl methacrylate monomer is used in the production of methylmethacrylate polymers and copolymers, polymers and copolymers are also used in waterborne, solvent, and undissolved surface coatings, adhesives, sealants, leather and paper coatings, inks, floor polishes, textile finishes, dental prostheses, surgical bone cements, and leaded acrylic radiation shields and in the preparation of synthetic fingernails and orthotic shoe inserts. Methyl methacrylate is also used as a starting material to manufacture other esters of methacrylic acid.

 Granules for injection and extrusion blow moulding which for their outstanding optical clarity, weathering and scratch resistance are used in lighting, office equipment and electronics (cell phone displays and hi-fi equipment), building and construction (glazing and window frames), contemporary design (furniture, jewellery and tableware), cars and transportation (lights and instrument panels), health and safety (jars and test tubes) and household appliances (microwave oven doors and mixer bowls).

Impact modifiers for clear rigid polyvinyl chloride.

Longfeng is one of the leading methyl methacrylate manufacturers and methyl methacrylate suppliers. As a professional methyl methacrylate monomer supplier, we have been devoting ourselves in providing high quality methyl methacrylate monomer. RFQ today!