Blogs/News/PSAs

Vehicle exhaust remote sensing system receives more attention and reliability with its advantages of speediness, convenience and wide monitoring range, etc. It can monitor exhaust gas towards gasoline vehicles as well as diesel vehicles on the road and identify the high-emission vehicles among moving vehicles without affecting normal running. The system connects monitoring data, vehicle emission information and exhaust annual inspection data through modern communication technology to realize integrated management for vehicle emission data. For vehicle pollution prevention and management department as well as vehicle inspection institution, the establishment of the system can provide system support for general management towards the data of road exhaust pollution condition, over-emission vehicle capture and inspection data in detection field for specific vehicle.

Car emissions test equipment can divided into mobile remote sensing system and stationary remote sensing system. Stationary remote sensing system, which includes horizontal stationary type and vertical stationary type, can be installed on city primary roads for continuous vehicle measurement while mobile remote sensing system can decide measuring location and time, which becomes an effective complement for fixed point remote sensing measurement.

Feature of Vehicle Exhaust Remote Sensing System:

Movable Type:

Calibration system integration

Narrow-brand radar speed measurement, strong anti-interference ability

Convenient Optical path adjustment, 15-minute layout

WIFI wireless data transmission, convenient for site checking

Highly integrated design, small size and light

Horizontal Stationary Type:

Real-time data matching, convenient and accurate

Passive design at the reflection end, reduce installation difficulty

Adopt imported laser device with excellent performance and high reliability

Vertical multiple-point detection of vehicle position, measure exhaust gas more accurate and timely.

Vertical Stationary Type:

Real-time data matching

Gasoline-diesel integration design

Remote operation and management, convenient for operation and maintenance

Integrated intelligent calibration system, more convenient for operation

Optomechanics design with independent intellectual property, strong anti-interference ability

HANGZHOU ZETIAN TECHNOLOGY, established in 2008, is one of the most professional vehicle emission testing equipment manufacturers in China. Welcome you to visit us. Currently, we are looking for certificated distributor and OEM clients throughout the world. R&D cooperation is also welcomed. If you have any interest, please contact us!

Overview

Hygronom is also called gas moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.

HM-100 flue gas hygronom is equipped with an internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts the in-situ immersion installation. It is a self-developed product, of which, the core component is from Switzerland. Put the sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect the measurement of moisture in the flue gas. After gas contacts with the measurement chip, the chip will change capacitance to measure flue gas concentration.

Features Of HM-100 High-temperature Hygronom

• The product is convenient for installation, disassembly, and cleaning with small and compact structure
• Direct and simple key operation on site
• The probe is equipped with heat tracing function to prevent condensate water from damaging humicap and thermal resistance
• Imported core components with high-performance index and reliability

Technical Parameter Of HM-100 High-temperature Hygronom

Typical Application Of HM-100 High-temperature Hygronom

1.High-temperature humidity measurement in exhaust emission (CEMS) of fire coal and oil burning boiler

2.Humidity measurement in food processing

3.Humidity measurement in wood, building material, and papermaking industry

4.Humidity measurement in fields of chemical industry and fiber

5.Humidity measurement under high temperature of open width dyeing in dyeing & printing industry

Overview

ERMS2000-V vertical stationary vehicle exhaust remote sensing system is a system that sets above the multi-lane and monitors the exhaust pollutants of every moving vehicle on each lane, It can measure CO, CO2, HC, NO and opaque smoke intensity rapidly and accurately; record the license, speed and acceleration of the car as well as the environmental parameters on micro air station. The system is composed of a gas monitoring unit, opacity monitoring unit, speed/acceleration monitoring unit, license capture unit, micro weather station and IPC of TDLAS and UV-DOAS technology. The system is with rapid and effective measurement, high automation and detection rate, less maintenance; each lane works independently, measures simultaneously without mutual interference.

Feature Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System

Stationary overlook installation:

dispensing with repetitive installation and overcome the accurate detection for multi-lane that current remote device cannot achieve to make multi-lane independent and simultaneous detection possible; not required people for watching to economize on manpower;

Simultaneous monitoring on gasoline/diesel vehicle:

adopt spectrum technology of high stability, which can detect emission pollutants of both gasoline and diesel vehicles at the same time to greatly reduce device cost;

Narrow-wave radar speed measurement:

adopt narrow-wave radar speed measurement with low microwave irradiation, low power consumption, long service life, high stability, and reliability; locate target accurately to avoid adjacent clutter interference; fast response time to ensure the capture rate and instantaneity of the target;

Integrated calibration system:

four components (CO, CO2, HC, NO) can be calibrated simultaneously, support both manual/auto calibration with simple operation and high efficiency;

Large measuring range:

a portal frame is as high as 4-6 meter, which is able to monitor emission for different types of vehicle; full road coverage without occupying lane and affecting traffic;

Real-time data matching:

real-time data matching without post-processing; output monitoring results in real time; combined with vehicle identification technology, screen excessive emission vehicle;

Remote online monitoring system:

online monitor battery status, calibration state, system alarm information, wireless communication signals and etc. Remote monitoring and operation, convenient for the operator to monitor system parameters;

Auto record and storage:

logs will record all the operating and alarm information for query and tracing, which is convenient for problem processing and solving. The outage will not affect data storage

Application Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System

The vehicle emission analyzer is used for the online monitoring of CO, CO2, NOx, HC, and opacity in vehicle exhaust emission. All parts are in the deft design and convenient for installation, which can be installed in all road sections and toll gates. It can form an online monitoring web through appropriate deployment in the typical area. Combined with network transmission technology,it can achieve data sharing and result display with environment detection center and vehicle management center, which provide the scientific basis for decision maker and vehicle exhaust pollution control measures, thus achieve the goal of online monitoring for the city vehicle pollution.

Specification Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System

Pollutant Repeatability: NO, HC, CO, and CO2 is a half of the maximum permissible error.

Speed Range: 5km/h~120km/h

Speed Detection Error: ≤±1.5km/h

Acceleration Error: ≤±0.2m/s2

Vehicle Image Capture Rate: ≥98%

Vehicle License Recognition Rate: ≥90%

Vehicle Image: picture will be saved in database in form of JPEG

Data Transmission Method: wireless wifi, wired broadband or 4G transmission

Response Time: ≤0.5s (T90) (system processing period)

Ambient Temperature: -40℃~+85℃, error≤±0.2℃

Relative Humidity: 0~100%RH, error≤±3%RH

Wind Seed: 0~60m/s, error≤±0.3m/s or ±3%, take the maximum

Atmospheric Pressure: 10hPa~1100hPa, error≤±5hPa

What is truck mounted crane

Truck mounted cranes equipment also called truck crane, Crane truck etc. Truck mounted crane is a kind of equipment for lifting, rotating and lifting goods by hydraulic lifting and telescopic system. It is usually assembled on trucks. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. The truck chassis can be any famous brand. Such as Sinotruk Howo, Foton, Shacman, DONGFENG, JAC, JMC etc.

Truck mounted crane: commonly known as truck crane official name: truck-mounted crane truck, it is widely used in municipal construction, coal mining, landscaping, and other infrastructure and other equipment hoisting and transportation. The car crane can be operated from left to right and can be rotated 360 degrees in both forward and reverse directions. It adopts military quality production, reliable quality, long service life, and fast working speed. Related models are 2 tons, 3.2 tons, 4 tons, 5 tons, 6.3 tons, 8 tons, 10 tons, 12 tons, 16 tons, 18 tons, 20 tons. 25 tons, 30 tons, 80 tons, 140 tons, cranes are available for selection, either straight or jib cranes. A truck with a crane is a type of transport vehicle that combines a truck crane and a chassis. It is composed of a boom, a turntable, a frame, and a leg. Through the movement of the mechanism such as luffing, telescopic, rotary, and hoisting, the mechanical action of the truck crane is realized, and the lifting operation is realized by a combination of different actions.