Blogs/News/PSAs

LS101 Solar Film Transmission Meter

Window Tint Transmission Meter For Glass Film With 365nm UV 950nm IR Rejection 550nm Visible Light Transmittance LS101

LS101 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data appear on the display. 

Parameters

1. Size: 160mm*115mm*33mm(L*W*H) 
   2. Testing opening: Wide 23mm * Height 76 mm
   3. Weigh: 425g
   4. Resolution: 0.1%
   5. Accuracy: +/-2%(Colorless and transparent material)
   6. UV Peak wavelength: 365nm
   7. VL Peak wavelength: 550nm
   8. IR Peak wavelength: 950nm
   9. Power supply: 5V DC ,mobile power supply (optional).

Features

1. UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device.
   2. Self-calibration and auto-calibration, NO need any manual adjustments 
   3.  Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.

LS180 Solar Film Transmission Meter

Window Film Transmission Meter Window Tint Meter For Film Glass With Visible Light Transmittance IR UV Blocking LS180

LS180 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data show on the display. 

Parameters

1. Size: 216mm*134mm*29mm(L*H*W)  
     2. Testing opening: Wide 47mm * Height 91 mm
       3. Weigh: 590g
       4. Resolution: 0.1%
       5. Accuracy: +/-2%(Colorless and transparent material)
       6. UV peak wavelength: 365nm
       7. VL peak wavelength: 550nm
       8. IR Peak wavelength: 1400nm
       9. Power supply: 5V AC/DC Adapter

Features

1. UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device.
     2. Self-calibration and auto-calibration NO need any manual adjustments 
       3. Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.

LS181 Solar Film Transmission Meter

Window Tint Transmission Meter Test Solar Film Window Glass 950nm IR 365nm Ultraviolet Rejection Transmittance LS181

LS181 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data show on the display. 

Parameters

1. Size: 216mm*134mm*29mm(L*H*W) 
   2. Testing opening: Wide 47mm * Height 91 mm
   3. Weigh: 590g
   4. Resolution: 0.1%
   5. Accuracy: +/-2%(Colorless and transparent material)
   6. UV peak wavelength: 365nm
   7. VL peak wavelength: 550nm
   8. IR Peak wavelength: 950nm
   9. Power supply: 5V AC/DC Adapter

Features

1. UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device.
   2. Self-calibration and auto-calibration NO need any manual adjustments 
   3. Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.

LS182 Solar Film Transmission Meter

SHGC Window Energy Meter With UV Full IR Visible Light Transmittance Solar Heat Gain Coefficient With Six Results LS182 

LS182 Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data show on the display. 

Parameters

1. Size: 216mm*134mm*29mm(L*H*W)  
     2. Testing opening: Wide 47mm * Height 91 mm
       3. Weigh: 590g
       4. Resolution: 0.1%
       5. Accuracy: +/-2%(Colorless and transparent material)
       6. UV peak wavelength: 365nm
       7. Visible light peak wavelength: 550nm
       8. IR wavelength: 950nm,1400nm and Full IR
       9. Power supply: 5V AC/DC Adapter

Features

    1.UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device.
    2.IR Rejection meter testing 950nm,1400nm and Full IR wavelength
    3.Self-calibration and auto-calibration, NO need any manual adjustments 
    4.Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.

LS300 Solar Film Temperature Meter

Solar Film Temperature Meter test glass window tint temperature heat insulation performance with Philips IR lamp LS300

LS300 Solar Film Temperature Meter is used to demonstrate the insulation performance and UV isolation performance of insulation film.

Parameter

1. Accuracy: +/- 0.5 oC
   2. Temperature measurement range: -55 oC to + 85 oC
   3. Size: 340mm *200mm *400mm(L*W*H)
   4. Instrument weight: about 13000 g 
   5. Power supply: 220V AC

Features

1.150W Philips infrared lamp used. 
2. Directly with both hands to feel the change in temperature.
3. Shows the real time temperature value and the temperature difference

LS301 Solar Film Temperature Meter

Window Tint Temperature Meter For Insulated Glass Filmed Glass Heat Insulation Effect With 150W Philips IR Lamp LS301 

The LS301 solar film tester is designed to demonstrate heat-insulating property of the solar film and can be used to measure the heat rejection rate and the temperature value.
 

Parameter

1. Temperature measurement accuracy for a single side: ±0.5℃
     2. Heterogeneous temperature degree of two infrared lamps: 2℃
       3. Temperature measuring range: -55℃ ---- +125℃
       4. Time for temperature test: 1 min
       5. Infrared ray: the peak wavelength is 950nm
       6. Measuring accuracy of heat rejection: ±2%
       7. Size of the testing glass: 200mm×160mm
       8. Gross weight: about 12 kg.
       9. Dimensions: 340mm×200mm×400mm(L*W*H)
       10. Power supply: 220V AC
    

Features

1. Two 150w Philips infrared lamps.
       2.  "Temperature" LED to display the current temperature value.
       3.  "Heat rejection" LED to display the heat rejection rate of the measured material.
       4.  Directly measure the heat rejection rate of the material.
       5.  Temperature comparison test to intuitively show heat-insulating property of different materials.

Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd company is devoted to produce various energy transmission meter. And we welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

Overhead rail shot blasting machine allows the workpieces to move with constant speed through the machine. The conveyor consists of a chain and trolley system suspended from a monorail, and can be driven at a constant speed or can be indexed.

A special feature of the continuously operating pass-through machine is the constant traveling speed of the workpieces. The ability to adapt the moving speed of the workpiece and the wheel power ensures that the machine can be easily and smoothly integrated into an existing production line. The abrasive is pre-accelerated very efficiently by the KT series blast wheels, allowing for short treatment times and reduced abrasive consumption when compared to conventional blast wheels. Maximum coverage of the workpiece is achieved by the blast wheels being arranged in an "X" alignment, diagonally to the moving workpiece. In this formation, the leading edges of complex components, welded sections, and flame-cut parts can be thoroughly blasted.

Overhead Rail Shot Blasting Machine Basic Specification

Applications

Removal of mill and forge scale as well as rust

Removal of burrs and scales

Removal of molding sand

Increase of surface roughness

Applications include blast cleaning welded steel fabrications, deburring and homogeneous die-cast parts, and peening dynamically stressed components. Batches of small components or singular large, heavy workpieces can be treated.

Advantage:

1.To achieve complete coverage, the workpiece carrying hooks rotate and stop automatically at a different location in the blast chamber. This rotation and oscillation process means that even highly complex workpieces, with hard to reach surfaces, can be safely and accurately treated.

2.The transport system can be designed for different size & weights. As an option, carrying hooks are available with integrated chain hoists for operational ease and safety.

3.Depending on the workpieces to be treated, and the preceding and subsequent processes, it may be advantageous to combine the carrying hooks with a chain hoist so that workpiece batches or heavy parts can be easily picked up. The chain hoist is operated directly at the loading/unloading station of the overhead rail system.

4.It can be used not only alone but also in combination with other machines to form a gas cylinder production line.

As one of the most professional shot blasting equipment manufacturers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

Argentina is one of the main crop producing and exporting nations in the world. In fact, agriculture makes up 54% of Argentina's exports. Their main agricultural export is wheat, they are the world's 5th largest wheat exporter in the world. Argentina's other main agricultural exports include soybeans, maize, barley, rice, flax seed, sugarcane, cotton, citrus fruits, and grapes. Industrial goods accounted for 31% of their exports. most of this comes from cars and motor vehicle parts. Other areas of Argentina's industrial products include steel, aluminum, and chemicals. Argentina has a large number of natural resources as well.

Argentina main imports and exports data  and Argentina import data actually provided by government customs, Filter by products, shipment dates, ports, country of origin and more.

1200 Million Buyers List Expand More Potential Customers Quickly

Our database has more than 130 million traceable companies, allows you to quickly find buyers and suppliers who export the exact targets you need, also including key decision makers name, email, phone, social media, etc... At the same time, we also send potential customers in the supply chain, such as factories, distributors, engineering companies and shopping malls.

Find qualified detailed importers and exporters in seconds

Advanced search on 10 billion Argentina shipment records; Confirm whether shipments are going up or down; Use data to determine health of company

Detailed charts and data views for Argentina

More than 19 professional reports, used to analyze buyers, suppliers, product sales distribution, etc. in the Argentina market, ahead of your competitors and know yourself more

We are professional import export data provider,RFQ today!

Our own number: 557

Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.

Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.

Comprehensive maintenance, direct to the construction site.

Overview of equipment:

Five-section RZ arm frame, the fabric is flexible.

X-shape outrigger, single side support, suitable for narrow site construction.

The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.

Computer energy saving control, automatic power matching, the average energy saving is 20%.

The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.

The new control system is free to upgrade automatically.

The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.

Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.

Safety precautions of Used Sany 46 Meters Concrete Pump

1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.
2. the Sany concrete pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.
3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.
4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.
5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.
6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.
7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.
8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.

Here are kinds of sany concrete pump for sale,welcome to know about it.

The radiator thermostatic balancing valve is a self-operated constant temperature flow control valve mounted on the radiator. It is composed of a thermostatic valve body and a temperature regulating device for air temperature sensing. The principle of action is that the opening of the thermostatic valve body is automatically controlled to change the amount of hot water passing through the radiator. When the room temperature is lower than the set temperature value, the radiator balancing valve automatically opens (or gradually increases) the radiator to heat the room until the room temperature reaches the set value. When the temperature of the room rises, the temperature sensor pack expands, causing the valve to gradually close (or close), and the heat sink will reduce the heating speed (or stop heating). Simply put, the main function is energy saving and comfort. However, many ordinary customers only use ordinary temperature control valves without a temperature pack, which cannot be automatically turned on or off. It is recommended that everyone adjust the indoor temperature and ensure that the indoor temperature is always at the set temperature by adjusting the hot water flow into the radiator. This thing is necessary for today's energy-efficient buildings. Designing houses and public buildings is a form of radiator heating. At this stage, it is necessary to use a three-way connection with a temperature control valve.

ZECO is one of the most professional control valve manufacturers in china , and we have been devoted to produce valve china for many years. If you want to know more details or want a quotation, just feel free to contact us!

Project name：Yacht model
Material: ABS engineering plastics
Process: CNC machining
Post treatment: Painting, plating
Qty: 1 set
Advantages: high precision, fast speed and high processing efficiency
Production cycle: 15 days

Project requirements:
1. Precise proportion: The yacht model is made in 1:40 scale
2, perfect assembly, fine surface treatment, smooth lines of finished products and even colors

Project Background
The birth of a yacht begins with a drawing. After a rigorous review, the model of the yacht is produced. This is the conceptual model of the yacht. The customer can easily make the appearance review by making the yacht model.

Project pre-stage analysis:
After receiving the design drawings sent by the customer, the production department holds a preliminary analysis meeting, and through the cooperation of various departments, detailed analysis of each problem that the product needs to pay attention to.

Process and material selection:
The hull and superstructure are mostly made of ABS engineering plastics as raw materials, and some small parts are made of metal stainless steel. Most of the manufacturing processes are done by cnc prototype china machine. After processing, the model needs to be post-treated by grinding, painting, electroplating, etc. to enhance the appearance of the model.

Production process:
1. Disassemble and check the overall matching degree of the components: Combine with the CNC machining process, split the model to ensure that the components of each level can be processed; with the help of the software, the pre-analyst optimizes the assembly of the drawings and verifies the feasibility of the drawings. .

2. Programming on the machine: After preliminary analysis, programmed on the machine. In order to ensure that all parts can be finely processed, we carry out precision machining through the industry-leading CNC processing equipment to ensure the high precision of the product.

3. After the machining is completed, the rough assembly is carried out: After the CNC machining is completed, the parts are rough-assembled and necessaryly polished to ensure that the products are assembled correctly before painting.

4. Fine post-processing: according to the customer's specified requirements, the finished parts are polished, painted, electroplated and other post-treatment processes.

5. Strict quality inspection: Each component is inspected by the project manager and transferred to the quality inspection department who checks again to ensure that the product has no any quality problems.

6. Beautiful finished products

Duch Group can provide customers with CNC processing, abs plastic machining, product appearance processing (grinding, polishing, vacuun casting, spraying, silk screen, pad printing, electroplating, laser engraving, wire drawing, etc.) small batch personalized product customization, mass production and other services, which can help customers quickly verify the appearance of the product, help customers achieve high-quality sample manufacturing and rapid manufacturing. If you have the above needs, please contact us!

Hexagonal steel tube is a kind of hexagonal (hexagonal) steel pipe which is made of steel. It is also called special-shaped steel pipe. Among them, there are octagonal, rhombic and elliptical tubes.

Hexagon metal tube is the general name of steel pipe with other cross-section shapes besides circular pipe. It has welded special-shaped pipe and seamless special-shaped pipe. Because of the material relationship, stainless steel special-shaped pipe is generally more than 304 material, 200, 201 material hardness strong wind, it is more difficult to shape.

Hexagonal tube is widely used in various structural parts, tools and mechanical parts. Compared with circular pipe, stainless steel special-shaped pipe generally has larger inertia moment and section modulus, has greater flexural and torsional resistance, can greatly reduce the weight of the structure and save steel.

Hexagonal steel tubes are generally distinguished according to the broken section and the overall shape. They can be generally divided into elliptical, triangular, hexagonal and special-shaped pipes. Diamond shaped pipe, stainless steel pattern pipe, stainless steel U-shaped pipe, D-shaped pipe, stainless steel elbow, S-shaped pipe elbow, octagonal shaped pipe, semi-circular shaped steel circle. Hexagonal shaped steel pipe with unequal edges, plum blossom shaped steel pipe with five petals, double convex shaped steel pipe, double concave shaped steel, melon seed shaped steel pipe, conical shaped steel pipe, corrugated shaped steel pipe, etc.

Plastic Water Bottle Caps Push Pull Lid Caps Features:

Plastic water bottle push pull cap, as seen on many water bottles, and here seen in closed configuration. The unique three-dimensional modeling is very unique and adopts safe and non-toxic pp material, which has little damage to the environment and supports recycling and utilization.The inner layer has Screw Cap, which ensures that no leakage of liquid occurs. The outer layer can be lifted off the bottle Cap. Without turning the inner layer, the outer layer can be lifted to fetch water.Closure is the standard for most bottle.The company has passed the ISO9001 quality management system certification and adopted the advanced ERP management system, making the quality and delivery time of our products always at the leading level in the industry.What's more, we pet bottle caps manufacturers also have a variety of closure options to match with your bottles.

The FTTH distribution terminal box is made of ABS material and is a box for protecting optical fiber cable and pigtail welding at the termination of the optical cable, and is mainly used for straight-through force connection, branch connection of the indoor optical cable and fixing of the cable terminal, and functions as a pigtail disk storage and protection joint.

FTTH terminal box is used in the end termination of drop cables in residential buildings and villas, to fix and splice with pigtails. FTTH terminal box can be installed on the wall and can adapt variety of optical connection styles.

Internal structure configuration instructions

Fiber fixing clip: fix incoming fiber cables;

Splice tray: used for welding and branching of optical fibers; the cover can be flipped, the disc can be stacked, the capacity is expanded, and the installation is extremely convenient.

UnitekFiber supplies various type of FTTH fiber optic termination box. Our terminal box is including 2 ports, 4 ports, 8 ports, 16 ports, 24 ports, 48 port etc. With different design.

Castor oil extraction machine is composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.

Characteristics of castor oil press machine:

1. The low-temperature pressed oil is light in color and rich in nutrition. The pure natural oil can be obtained through precipitation filtration. The refining cost and reduces and consumption was reduced.
2. The protein pressed under low-temperature has little damage, which is conducive to the full utilization of oil protein.
3. Low pressing temperature (room temperature 10 ^ C ~ 50 * C).
4. During the pressing, the oil does not contact with any solvent, acid, alkali, bleaching soil and chemical additives. The nutrition and microelement loss of oil and oilseed meals are small and protein content of cake feeds is high
5. High oil output rate -- compared with the old equipment, its normal oil output rate can be 2 to 3 percentage points higher, with an average of 1 to 3 kilos more for every 100 kg of peanut processed. The annual economic benefit is considerable.
6. Energy saving -- At the same output electrical power consumed can be reduced by 40%. Calculate with average every hour save 6 degrees electricity, daily production can save 30 yuan electric charge.
7. Labor-saving -- At the same output, labor can be reduced by 60%, saving about 40 yuan per day.
8. Wide use -- One machine is multi-purpose. It can press more than 30 kinds of oil crops such as peanut, flax, sesame, rapeseed, oil sunflower, cottonseed, and soybean.
9. Pure oil -- Filter residue by vacuum to ensure purity of oil and meet health and quarantine standards.
10. Small floor space -- 10-20 square meters can meet the requirements.

The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.

Polypropylene carpet is a synthetic fiber carpet made from petroleum refined propylene. Polypropylene carpet belongs to chemical fibers. Polypropylene carpet has the advantages of light texture, low price, friction resistance and good care. Especially, the technological progress in recent decades has greatly improved the comfort and decoration of polypropylene carpet, which has made polypropylene carpet popular and sought after by people.

Function of Polypropylene Floor Mats

01 Lightweight Texture

The greatest advantage of polypropylene carpet is its lightweight texture. Its density is only 0.91g/cm3, which is the lightest in common chemical fibers. Therefore, the same weight polypropylene carpet can get higher coverage area than other fiber carpets.

02 Low Cost

The production cost of polypropylene carpet is low, the raw materials are abundant, and after adjusting the content of ingredients, it also has the effects of flame retardant, heat insulation, heat preservation, wear resistance, sound insulation, antistatic and sound absorption.

03 High Strength & Large Expansion

Polypropylene carpet has the advantages of high strength, large expansion and good elasticity. So the polypropylene carpet has good wear resistance.

04 Moisture Absorption

The moisture absorption of polypropylene carpet is very small, and the moisture regain under general climatic conditions is close to zero. But it has a wicking effect and can transfer water vapor through capillaries in fabrics, but it does not absorb any water itself. Polypropylene carpet can keep No deformation and non-cracking in different climate.

05 Good Chemical Corrosion Resistance

Polypropylene carpet has good chemical corrosion resistance. Apart from concentrated nitric acid and caustic sodium, polypropylene carpet has good acid and alkali resistance.

06 Anti-Aging Properties

Polypropylene carpet has poor light resistance, poor thermal stability, easy aging and not resistant to ironing. However, anti-aging properties can be improved by adding anti-aging agent to the spinning process.

07 Good Electrical Insulation

Polypropylene carpet has good electrical insulation.

08 Dyed With Raw Liquor

The polypropylene carpet is dyed with raw liquor, which shows a concise, generous and elegant atmosphere

Varieties of Polypropylene Floor Mats

The varieties of polypropylene carpet are filament, staple fiber, bristle fiber, membrane split fiber, hollow fiber, special-shaped fiber, all kinds of composite fiber polypropylene carpet.

Maintenance Of Polypropylene Floor Mats

1. Polypropylene carpet fluff is easy to accumulate dust. Vacuum cleaner is very effective for polypropylene carpet dust.

2. Hand-held vacuum cleaners are used to deal with areas where falling ash is particularly serious, such as corners, beneath tables and chairs, and bedside.

3. New stains are the easiest to remove and must be removed in time. If the stain is to be dried or infiltrated into the deep part of the polypropylene carpet, it will cause long-term damage to the polypropylene carpet.

4. Regular mid-term cleaning. The polypropylene carpet should be cleaned by tools in the medium term to remove the sticky dirt. Once the dust deposits deep in the carpet fibers, it should be sent to the cleaning shop for cleaning. After several years of using polypropylene carpet, it is better to change the position to make it wear evenly. If the polypropylene carpet has uneven, tap it gently. Hot towels or steam irons can also be used to smooth the carpet gently.

5. After the polypropylene carpet is wiped with clean water, please use a clean towel to absorb the water and dry the carpet as soon as possible. Please do not expose the carpet to the sun in order to avoid fading.

6. Rolling brushes can not only comb polypropylene carpets, but also brush dust and dirt.

7. If you break glass on a polypropylene carpet, you can use a wider tape or cotton dipped in water to stick up the tiny broken glass, and then use a vacuum cleaner to remove it.

As one of the most professional polypropylene mats manufacturers for more than ten years, Yiwu Jietai Rug Co., Ltd. supplies all kinds of polypropylene carpets. Customers can customize their designs and sizes freely. At the same time, we can also make OEM for customers. Welcome customers to win-win cooperation with us.

YIWU JIETAI RUG CO., LTD has accumulated rich experience in the production and sales of commercial carpet mats. RFQ today!

TRANSPARENT LED DISPLAY APPLICATIONS

Transparent LED Display Screens features in super (or ultra) transparent, simple, high contrast ratio, smart, high refresh rate, new configuration equal characteristic creating a more efficient and valuable urban media! Transparent LED screens can be converted into more valuable media promotions with unique visual impact forces, such as glass window, glass curtain walls, video walls or large indoor commercial spaces. YIPLED ® transparent led display to keep the elegant appearance and high transparency, and become a new media, irreplaceable and a wider range of business applications, and leverage the larger advertising markets.

TRANSPARENT LED DISPLAY PRODUCTS

YIPLED smart transparent LED display, with diversity products (different pixel pitch and specification) to apply into diversity market. YIPLED's wide portfolio includes Ice Series transparent led screen, Jade Series transparent glass display, Poster Series transparent led display, and Crystal Series see through led screens. All of these screens have the same advantages of 85% transparency, smart control, plug and play, high refresh rate (3840Hz) can be customized to >10,000Hz, wider viewing angle(160°), and 3 years warranty (Exception: rental series 1 year). Speak to a representative of Ydea Group sales team and buy yours from the leading transparent LED display manufacturer in China. Find more resources like videos, faqs, pdfs from the support page.

PRODUCT OVERVIEW

LED wisdom transparent screen is a new type of transparent LED display,

with very deeply, minimalist, intelligent, highlighting features, transparent display

characteristics of novel and unique, new, irreplaceable, more extensive commercial applications,

driving more mass media advertising market. YIPLED is the first led display manufacturer in China mainland to provide smart transparent LED screens with overall video display solutions.

With the top R&D ability in the industry, YIPLED is the only one company who can provide the hardware, software, firmware, structure design, and cloud technology all by itself. YIPLED delivers the versatile transparent LED display to various applications including: retail glass window, building glass wall, airport, bank, hotel, shopping mall, 4S store, luxury store etc.

TRANSPARENT LED DISPLAY PROJECTS

YIPLED transparent LED displays perform at world class event including Pyeongchang 2018 Winter Olympics "Beijing 8-minutes", Beijing International Film Festival, Accura World Debut, Beijing International Auto Show, Faye's Music Tour, CCTV show (AI, National Treasure), Spring Festival shows, etc. Check out high performance transparent LED screen cases and request a product catalog. Industry Leader. Featured Products. High-Performance Transparent Display With Expert Technical Support.

YDEA is committed to providing customers with the best led display control for the professional companies.

2.7V High Temperature Series

High temperature 85 ° C; Rated voltage 2.7V 1000 hours; Surge voltage 2.85V; Capacity range 1.0F~100F; Operating temperature range -40 ~ +85℃; Capacity attenuation ≤ 30%, internal resistance change ≤ 4 times.

5.5V High Temperature Series  

Technical dataHT SeriesPerformance characteristics: High temperature 85 ° C seriesTypical applications: RAM, detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive and so on.

Are you looking for high temp capacitors?

As one of the most professional supercapacitor suppliers of china super capacitor, we have been devoting ourselves in providing high quality super super capacitor with competitive price. If you want to buy super capacitor, don’t hesitate to contact.

Diatomite brick is a kind of Clay Insulation brick. Thermal Insulation Bricks are high porosity refractories with low thermal conductivity and high porosity (no less than 45%) used to reduce heat losses and thus to maximize heat conservation within the furnace.

Clay Insulation brick Characteristics
●High porosity
●Low volume density
●Low Thermal conductivity

Clay Insulation Bricks Application:
Clay Insulation Bricks are widely used in various industrial furnaces such as hear boilers, glass kilns, cement kilns, fertilizer making gas furnaces, blast furnaces, hot blast stoves, coking furnaces, electric furnaces, etc. They are mainly used in insulation layer of furnace that do not contact with molten materials and erosive gas. The working temperature is 1150-1400 degrees centigrade.

Clay Insulation brick Technical data:
We offer bulk density from 0.4~1.5g/cm. Compresive strength is from 1.0~5.9Mpa. Working temperature is 1150~1400℃. Thermal conductivity is 0.2~0.7 w/m.k at 350℃±25℃.

Clay Insulation bricks packing
By cartons and pallets.

Oreworld trade (Tangshan) co., Ltd. has been engaged in exporting business for about 20 years. It is one of the most professional high alumina cement suppliers in China. If you want to know more details or want a quotation, just feel free to contact us!

We have large venue projectors for sale, and the details as below.

DU7200 has 7200 lumens brightness with the 1920*1200 resolution, and the throw ratio of DU7200 is 0.79. It can supply to the exhibition hall, company exhibition, the lecture hall of the university, the performance and others.

Functions of Laser Projectors

Parameter

DLP Projection Technology

DU7200 large venue video projector adopts the DLP technology with the 0.67” DMD chip. DLP technology has the advantages in the high resolution and the high color stability. The contrast ratio of the DLP projector is about twice of the LCD projector, which makes the color performance higher in the bright rooms. Digital color reproduction makes sure the high image reducibility of the real materials.

Laser Light Source

DHN projectors focus on the development and the innovation of the laser light projectors. Comparing with the traditional light source, laser light source has the better unipolarity and the directional. Laser projectors also have the advantages of long service life, low cost of the maintenance. In theory, the service life can reach to 20000hours, and laser light source also has the good qualities of wide gamut, rich color and high color saturation, which makes the images through the projection are real and colorful.

High Brightness and Resolution

DU7200 large format projector has the 7200 lumens brightness and the WUXGA (1920*1200) ultra-high resolution, and this feature makes it can meet the projection of most of the highlighting environment.

Rich Colorful Performance

The brightness uniformity of the DU7200 is 85%(Typical), and the color uniformity isΔu’v’≦0.02. The advantage of the brightness uniformity and the color uniformity of the DU7200 is that it can increase the visual perception and reduce the visual fatigue. Viewers can enjoy the brightness and large screen.

Geometric Correction

DU7200 large image projector supports 2*2, 3*3, 5*5, 9*9, 17*17 gridding's geometric correction, so the single projector can projection on the irregular screens (for example curved screen). Users can make the multiple projection edge blending to meet the requirements of the curved, plane, and the immersive polyhedral projection by this geometric correction function.

Projector's built-in edge blending function can also choose the different colors of the grid lines, the density of the grids. Users can adjust the sharpness of the images after geometric correction, and the system will store the settings of the geometric correction for calling of the next time.

Users can lock the single projector when they adjust the multiple projectors. The remote-control signal will lock into the projector you want to adjust, and other projectors will not have the unnecessary distractions, which can greatly improve the efficiency of the adjustment.

Rich Interface

Rich interface can satisfy the requirements of video and audio input and output, power supply, network control (ultra-long-distance transmission), RS232 control, firmware update and so on. Users can use the projectors more convenient.

Input Interface

VGA Inx 1

Audio in Jack X 1

HDMI x 2

HDBaseT x 1

Microphone X 1

RSRS — 232x1

Mini USB x 1 for F/W upgrade or Interactive

3D VESA

Output Interface

VGA out x 1 /Audio out x 1 /RJ45 x 1 /USB-A x 1 (5V@1.5A)

Network Interface

RJ45 X 3 (Support projector control   & PoE)

Shanghai DIDON Industrial is one of the leading   laser projector suppliers in the industry.  If you want to know more details or want a quotation, just feel free to contact us!

Model: SYPD-B gray and white paper straws

Colour: Grey with white polka dot

Size: Length: 19.7cm, Inner Dia: 5.5mm, Outer Dia: 6mm(1/4 inch)

Weight: 1.2g per pcs (±0.02)

Packing: Normal in single colour: 500pcs/ OPP bag, 5000pcs/Carton

Mix maximum 20 colors per case.

We can customized packing as below:Paper bag/ Plastic Packing/ OPP bag with header card

Type: Event & Party Supplies

Feature: Disposable, Biodegradable, Eco-Friendly water-proof

Material: 100% Food Grade Biodegradable Paper

Printing: Eco-friendly water ink, flexo print

Design: Various patter and LOGO

Certificate: FDA,LFGB, SGS

Delivery time; 25-35days

Place of original: Ningbo,China

Port: Ningbo/Shanghai, China

MOQ: 100000PCS

OEM/ODM: Accept

Supply Ability: 5000000PCS/ Week

Payment Terms: 30% Advance payment, 70% against B/L Copy.

Payment method: T/T, Western Union, L/C etc.

Usage: Restaurant/Bar/Party/Decoration

Product quality is the core. With our leading technologies and experiences for years, ShenYu is excel at producing the best custom paper straws and variety of paper products to satisfy our diverse customer needs.

Overview
The Single glass window consists of an aluminum frame and a single layer of tempered glass. Due to the transparent properties of glass, it is usually used as an observation window. Because there is only one layer of glass, the thermal insulation of the windows is not particularly good. It is commonly used in the partition walls of two rooms with similar temperatures.

Double Glass Window clean room window details Features
The glass used in the Single glass window is tempered glass, which has many advantages as follows:
safety
When the glass is damaged by external force, the debris will become a honeycomb-like obtuse-angled small particle, which is not easy to cause serious damage to the human body.
high strength
The impact strength of tempered glass of the same thickness is 3 to 5 times more than that of ordinary glass, and the bending strength is 3 to 5 times more than that of ordinary glass.
Thermal stability
Tempered glass has good thermal stability, and can withstand a temperature difference of three times more than that of ordinary glass, and can withstand a temperature difference of 300 °C.
advantage
The first is that the strength is several times higher than that of ordinary glass and it is resistant to bending.
The second is safe use, and its load-bearing capacity is improved to improve the fragile nature. Even if the tempered glass is broken, it turns into small piece with no sharp angle, so the damage to the human body is greatly reduced. The quenching and rapid heat properties of tempered glass are 3 to 5 times higher than that of ordinary glass, and it generally can withstand temperature changes of more than 250 degrees, which has obvious effects on preventing thermal cracking. It is one of the safety glasses to ensure the safety of qualified materials for high-rise buildings.

If you have any needs, please contact us-WONZONE.

LEDFUL is a professional led screen company, and we always focus on producing outdoor led panel. We can also provide you led studio 12, rcg file for led screen and led studio 10. Always feel free to inquiry!

Linsn rcg

LED studio is software from Linsn control system for LED display. Because Linsn system multi-function and easy operation, it is adopted in most LED display. Here we introduce clients FAQ.

Question: What's serial number and password of led studio?

Answer: Serial number is 888888, password is: after input "linsn", then "168".

BMC/SMC Moulding Description:

We mainly use SMC injection molding and pressure molding as the methods. When designing the flow channel and parting surface,  we think that the cavity pressure should be as small as possible, especially some small ribs, as well as the smooth exhaust, the discharge position, shape, and material flow direction, which would all be fully considered. And the active exhaust must be complete with an overflow. We guarantee the appearance and strength. With the Vacuuming structure, the mold temperature balance is consistent as the appearance and strength of the product shall be guaranteed as well.

SMC/BMC Mould Features:

high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof, low energy consumption, no waste, no need to clean the mold cavity, mold The temperature is stable, the temperature difference is small, the breakage is short, poor appearance is less, and the efficiency is high.

About BMC/SMC Moulding：

The basic process of the compression molding process is to place a certain amount of the pre-treated molding material into a preheating compression mold, and apply a higher pressure to fill the mold cavity with the molding material. Under the predetermined temperature conditions, the molding material is gradually solidified in the cavity, and then the SMC product is taken out from the stamper, and the necessary auxiliary processing is performed to obtain the final product.

The pressing process of the composite molded product is a process of solidifying into a product in a cavity after the binder is loaded or heated under the condition that the curing agent is present or heated. Molding temperature, molding pressure and mold exhaust, temperature balance, and mold structure all affect the quality of SMC products. It is necessary to determine the best solution under the consideration of various influencing factors.

BMC is the initial abbreviation of English Bulk Molding Compound, and the Chinese name is a group molding compound. Pre-mixed into a paste by unsaturated polyester resin, low shrinkage/low profile additive, initiator, internal mold release agent, mineral filler, etc., and then added thickener, colorant, etc., with different lengths of glass fiber, in special Stirring in the kettle is carried out to carry out a thickening process, which finally forms a dough-like intermediate material which can be used for molding and injection molding.

The BMC injection molding process basically follows the same rules as the injection mold. However, SMC and BMC molds also have different characteristics from injection molds, such as flow path, exhaust, heating, cavity pressure and balance, parting structure, mold steel used and precision, shrinkage and injection molds. Differently, the BMC mold is molded at a high temperature, and the plastic mold is molded at a normal temperature.

SMC and BMC molds require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods.

Vacuum assisted systems for BMC and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers.

Zhejiang Aobang Technology Co., Ltd. is one of the most professional sheet molding compound manufacturers in China, and we hope to gain recognition and support from our customers and to develop mutual cooperation.

Are you looking for RTV silicone thermal conductivity?

FEATURES OF GOLOHO-2752

GOLOHO-2741 is a high performance thermal conductivity of silicone sealant 

• Excellent thermal conductive, heat dissipation and adhesion
• Small power heater can be directly bonded on the radiator without tighten the firmware again to avoid the short circuit because of fasteners loose. Thus, reliability is improved
• Dissipate the heat and tight according to contacting heating device with radiator by the material
• Long term reliability and service life to sensitive circuit and components
• Insulation, stress-relieving, vibration absorption
• Use at: -50~200℃
• Resistance to weather, heat, chemical erosion
• Can be exempted from ultraviolet light, ozone and chemical effects outdoors
• Particularly applicable to high demanding PCB, such as instrument and apparatus, sensor, remote sensing system
• White, grey, black
• Comply with ROHS
• Multiple packaging sizes are available for this product, 310ml plastic bottles, 2.6L plastic bottles, 20L plastic buckets, 200L iron drums
• Shelf life: 6 months from the production date, cure reaction begins once contacting moisture

Description of the thermally conductive silicone paste 

APPLICATIONS OF GOLOHO-2752

GOLOHO-2752 silica gel with high performance has a wide range of applications.it is specifically designed for seal of electronic group and industrial materials

TECHNICAL DATA OF GOLOHO-2752

USE AND STORAGE OF GOLOHO-2752

Avoid contact with skin, eyes, and clothing. Wash eyes for 15min once touch with it. Remove material from skin with the dry cloth, water, and soap.

Wash hands after using

Storage: keep in a dry place at 5~25℃

HANDLING PRECAUTIONS OF GOLOHO-2752

To ensure all the protected surfaces be clean and dry

Diameter: based on the sealing surface gap

Cure time: be different with temperature and humanity

PHYSICAL AND CHEMICAL PROPERTIES OF GOLOHO-2752

Appearance (color): white, grey

Appearance(state): paste

Density(25℃): 1

Solubility: indissolvable

Flammability: fire resistance

Volatility: none

TRANSPORT INFORMATION OF GOLOHO-2752

Not restricted

FACILITIES OF GOLOHO-2752

Global or local exhausting and flushing facilities

FOR USERS OF GOLOHO-2752

Without notice, the contents of this article may be changed due to the product performance improvement and specification.

We just only to ensure the specifications of our products. You have to test before using to confirm if it is suitable for your use.

The product is intended for industrial use only.

The data is the real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before the user's applies. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensure the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there are any quality problems. GOLOHO POLYMER will provide replacement or refund if any quality problems. Users should be responsible for ensuring that comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.

Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389; for more details, please visit website: info@goloho.com.cn

GOLOHO POLYMER is an industry leader in the production field of rtv grease. If you want to know more details or want a quotation, just feel free to contact us!