Blogs/News/PSAs

Castor oil extraction machine is composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.

Characteristics of castor oil press machine:

1. The low-temperature pressed oil is light in color and rich in nutrition. The pure natural oil can be obtained through precipitation filtration. The refining cost and reduces and consumption was reduced.
2. The protein pressed under low-temperature has little damage, which is conducive to the full utilization of oil protein.
3. Low pressing temperature (room temperature 10 ^ C ~ 50 * C).
4. During the pressing, the oil does not contact with any solvent, acid, alkali, bleaching soil and chemical additives. The nutrition and microelement loss of oil and oilseed meals are small and protein content of cake feeds is high
5. High oil output rate -- compared with the old equipment, its normal oil output rate can be 2 to 3 percentage points higher, with an average of 1 to 3 kilos more for every 100 kg of peanut processed. The annual economic benefit is considerable.
6. Energy saving -- At the same output electrical power consumed can be reduced by 40%. Calculate with average every hour save 6 degrees electricity, daily production can save 30 yuan electric charge.
7. Labor-saving -- At the same output, labor can be reduced by 60%, saving about 40 yuan per day.
8. Wide use -- One machine is multi-purpose. It can press more than 30 kinds of oil crops such as peanut, flax, sesame, rapeseed, oil sunflower, cottonseed, and soybean.
9. Pure oil -- Filter residue by vacuum to ensure purity of oil and meet health and quarantine standards.
10. Small floor space -- 10-20 square meters can meet the requirements.

The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.

Screw type oil press and hydraulic press are two main types of oil press in the market at present. These two kinds of oil press have their characteristics, and they should be selected according to their characteristics as reference. Helix is relatively old, driven by motors through belts, chains or gears, with low efficiency and single control, which is not suitable for complex applications. Hydraulic pressure is more advanced, efficient, small, easy to control, large output, more widely used, slightly expensive.

In the way of oil pressing, screw type oil press produces high temperature through screw extrusion and extracts oil from oil. The hydraulic press uses the liquid as a medium to pressurize oil, to extract oil. In terms of oil quality, the screw press will destroy the nutrients in the oil because of the high temperature when it works, and it needs to be treated by oil cooling. A hydraulic press is a physical way to extract oil, and the quality of the oil extracted is better. When sesame, almond, peanut, and other materials are used, the hydraulic press should be used. In terms of oil yield, screw type oil press has a high oil yield, while the hydraulic press has a relatively low oil yield.

Cold pressing is to press the oil directly in the oil press without heating after the oil is screened and cleaned. It is difficult to press the oil thoroughly in such a way at one time. The oil cake still contains oil. Sometimes they are needed because they contain less oil but are not completely free of oil. The advantage of the cold press is that the color is light. When the oil is pressed, there will be no foaming or silting pot. The color is beautiful. The downside is that the oil is not aromatic, and it takes more than twice to press it clean.

The oil press is used when the oil has not been heated or in low temperature before the oil press. The extracted oil is of low temperature and low acid value. In general, no refining is required. After precipitation and filtration, the refined oil can be obtained.

When using the cold oil expeller, the workers must select raw materials carefully. Otherwise, the quality of the cold oil extraction will be seriously affected by the different maturity of the raw materials and the harmful substances contained in the raw materials (such as aflatoxin in the mildew oil and gossypol toxin in cottonseed).

Cold drawn oil has is natural, avoiding the adverse effects of traditional high-temperature oil extraction. The cold-pressed oil retains the natural flavor and color of the oil, completely preserves the physiologically active substance in the oil (vitamin E has the anti-aging function, the sterol has the effect of strengthening the skin and enhancing the metabolic function of the human body). The cold-pressed oil, with the original taste and flavor, is a good choice of healthy life.

Cold press oil expeller is the core equipment of cold pressed extraction. Cold pressed oil is such an oil technology that the nutritive value, the unchanged molecular structure of the oil and the cake were obtained by pressing oil at room temperature to 65℃ without rolling or steaming.

Cold press screw oil extractor can be divided into three parts: the main engine, the automatic feeding device, and vacuum filter.

We have cold oil press for sale and cold press machines for sale, if you need please contact us.

YZYX120ZHWK combined oil press with centrifugal combines with the centrifugal oil filter above the basic function of auto-heating the press cage by replacing the traditional manual wearing in way. The crude oil from the press cage will directly flow into the hydration cylinder of centrifugal oil filter. This machine is easily operated with better working efficient.

YZYX120ZHWK centrifugal automatic temperature controlling combined oil press is developed on the basis of the single machine to meet the market demands. The function of auto-heating the press cage has replaced the traditional way by squeezing residue cake, which could shorten the preparation work, reduce the energy consumption and abrasion, and thus lengthen the durability. When the squeezing is suspended, the temperature can be maintained by this system. In the meanwhile, this machine was added with centrifugal filtration function. The crude oil discharged from the press cage will directly flow into the hydration cylinder of centrifugal oil filter (if the oil needs to be cooled, start the stirring function of the centrifugal filter). Once the oil volume reaches the capacity of centrifugal for one time or twice work, it will close the valve of oil collection pan, and start hydration of oil in hydration cylinder, then filtration with the centrifugal filter. The oil after filtration can be bottled.

The press machine and multifunctional oil filter can be used in combination or separately for single use.

YZYX120ZHWK is the three steps press combined oil press, the pressure is stronger, with which user can obtain more excellent economic benefits.

Main Features of YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press

Below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking, and cooking, etc.

The day capacity (t/24h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.

Applicable oil plants and Business of YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press

1.  More than 30 types of oil plants, such as rapeseed, cottonseed, soybean, shelled peanut, flax seed, sunflower seed, and palm kernel, etc.
2.  Uses in oil factory, oil mill, and privates oil production workshop.
3.  Good both for pressing raw oil material and roasted oil material.
4.  Performs well both in cold pressing and hot pressing.
5.  The lower residue oil of the dry cake.

The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.

The automatic temperature controlled integration oil press is built up with electricity controlling part, electric frying part, and auto heating & squeezing system, vacuum filtrating system.

Automatic Temperature Control Integrated Oil Press Category:

YZYX70ZWY Integrated Oil Press

The electrical frying part mainly consists of an electrical heating device, insulating material, frying pan, and churn, etc.

The auto heating and squeezing department mainly consists of heating part, squeeze cage part and squeeze spiral part etc.

The vacuum filtration department mainly consists of electromotor, vacuum pump, oil and gas separator urn, valve, vacuum pipe etc.

"Guangxin" brand is a top brand for oil press machines. The manufacturer Sichuan Guangxin Machinery of Grain and Oil Processing Co., Ltd, has always been in the top techniques and markets. It has been exported to over 80 countries in the world and looks forward to establishing long term cooperation with users, distributors and trade companies worldwide.

The integration oil press machine is a new advanced designed model which suits for high-grade oil materials like the shelled peanut, sunflower seeds, and sesame etc. The machine has the advantages of easy operation and high oil yield. Customers can get clean oil from this model.

QINGGONG MACHINER with KT series high-performance turbines, the sand blasting machine parts has blasting wheels provided with eight throwing blades locked into the wheel double-disc. The double-disc wheel offers the following advantages:

Abrasive

Abrasive, the blasting materials, it depends on what kind of material you need to blast cleaning, this is the first things first for the blasting media' choice. We have steel shot, steel grit, and steel cut wire shot.

Advantages of abrasive

Uniform particle size, good cleaning effect, low dust, low hollow, tight internal structure, high wear resistance, high life, moderate hardness, good strength

Our company has shot blasting machine spares. And the shot blasting prices are reasonale and competitive.

According to its working principle, shot blasting machines can be divided into two types, that is, wheel blasting and air blasting. QINGGONG MACHINERY sand blasting machine manufacturers a variety of shot blasting machines to meet your different needs. According to the industry, different types of shot blasting machines can be chosen from. To learn more, you may see the “Industry” applications. Contact us to get more information about our shot blasting machine products.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

CNC punch press machine is the machine that performs the punching, the operation that serves to make holes and cuts in the metal sheet. The turret punching process is the best alternative to laser cutting for its balance between price and quality, as long as the geometry of the piece allows it. CNC machines are programmed with a design which can then be manufactured hundreds or even thousands of times. Each manufactured product will be exactly the same. CNC machines can be programmed by advanced design software such as Pro/DESKTOP®, enabling the manufacture of products that cannot be made by manual machines, even those used by skilled designers/engineers.

Qinggong MACHINERY has 3 types  cnc turret punch machine, including servo CNC turret punching machine, mechanical CNC turret punching press machine and hydraulic CNC turret punching machine.

Details about CNC Turret Punch Press

The main transmission of servo cnc turret punch press machine is directly from drive servo motor, which retains the advantage of a simple and reliable structure as mechanical transmission, it features  high efficiency, energy saving, low noise, high accuracy, and can realize many processes like die-cutting, forming, beading, lettering and so on.

Mechanical CNC turret punching machine by the programming software (or manual) processing program, by the servo feeding mechanism sent the plate material to the required processing position, at the same time by the die selection system select the appropriate die from the turret, by the mechanical power system according to the procedure of punching, automatic completion of the workpiece processing.

The driving system of the Y30 series CNC turret punch machine is hydraulic, with low noise, high speed, and high efficiency, and the thickness of the punching plate is 6mm. The design of high precision and high repetitive positioning accuracy enables the machine to produce more high-precision parts than other similar machines.

We have turret punch for sale, CNC punching machine price is reasonale and competitive.welcome to buy.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

Why choose walnut oil extraction machine ?

1) Zero add

Zero addition means that walnut oil is extracted by a walnut oil extraction machine without any additives. The technology of water substitution is based on the research, promotion, optimization and development of water enzymatic method.

2) Zero pollution.

Zero pollution refers to the storage of walnut oil without any pollution from the beginning to the end.

The first is no additive pollution.

The second is that the walnut oil extractor has no pollution in the walnut oil storage process. ① Build a large area of solar drying workshop to dry the Camellia oleifera seeds in sunny, cloudy and rainy days, effectively prevent the mildew of the Camellia oleifera seeds; ② build an electric drying workshop for the Camellia oleifera seeds, after peeling, heat the Camellia oleifera seeds to the optimum dry humidity suitable for storage; ③ build a temperature-controlled Camellia oleifera seeds storage warehouse to store the Camellia oleifera seeds at a constant low temperature, effectively prevent the mildew of the Camellia oleifera seeds and the excessive acid value 。 ④ The independently designed screening machine can remove 100% of the mouldy camellia seeds, and provide an additional insurance for the polluted Camellia fruits and camellia seeds in the storage process.

Third, there is no pollution in the process of production and storage. Without high temperature and high pressure, the water substitution process can not only retain all the original nutrition of Camellia oleifera seeds but also do not produce harmful substances such as benzopyrene and no pollution in the production process.

Looking for walnut oil press for sale?

Mianyang Guangxin Import And Export Co., Ltd is a professional manufacturer of walnut oil press machine and its auxiliary equipment with 30 years history, covering an area of 50,000 square meters, with more than 200 staff members, among which 10% are mechanical engineers and technicians, who are in the leading position in China. The company strictly complies with ISO9001: 2015 management system to guarantee its quality.

Extraction Efficiency and Precautions of Corn Oil Press Machine

Corn can press oil only by refining its germ. One hundred kilograms of corn can produce 20% of the corn's germ and 45% of the corn's germ. That is to say, one hundred kilograms of corn can produce 10 kilograms of germ and 10 kilograms of germ can produce less than 5 kilograms of crude oil. After the crude oil is produced, it must be refined before it can be used. That is to say, one hundred kilograms of corn oil can have 3 kilograms to 4 kilograms Kg of refined oil.

Matters needed attention

1. There is no special corn oil press.
2. To be exact, it is not corn oil press, and it can not be directly realized to squeeze oil from corn. The usual method is to extract corn germ from corn by dry method or wet method (this refers to processing method), then dry and stir fry corn germ to a certain extent, and then press oil by oil press to get corn oil. At this time, the corn oil obtained becomes industrial corn oil or crude corn oil, which is not suitable for direct consumption.
3. There is no special corn oil press, which is common to other oil presses. Only when corn germ is used to press oil, the pressure is higher than that of common oil materials.
4. Cost

Because the cost of raw materials and power are different in different places, it is difficult to accurately say a value. For ordinary corn (now there are high oil corn varieties): 100 kg of raw corn can produce about 2-2.5 kg of corn oil.

Introduction to the walnut oil extraction machine

Walnut oil extraction machine presses the walnut with a screw oil press. walnut oil press equipment can automatically control the temperature. With intelligent equipment, it can press in all seasons. The production will not be delayed. According to the different requirements of oil, the temperature of the crude oil is automatically adjusted, which is not affected by seasons and climate.

The application field of walnut oil press machine:

Walnut oil press equipment is suitable for walnut-growing areas. It can be allied in large oil extraction plants, urban and rural oil extraction workshops, processing plants for imported materials and chain organizations of brand edible oil, agricultural markets, communities, supermarkets, town markets, urban living areas, and other densely populated areas. It is also suitable for small and medium investment entrepreneurs. It can also be used to crush peanuts, soybeans, oil palm, rapeseed, cottonseed, etc.

Advantages of walnut oil extraction machine:

1. The quality of oil is high. The oil smells sweet. The machine presses oil in the 150℃temperature oil. Oil color and flavor will not wear out.
2. Take out more oil and squeeze it out once. This machine adopts the four-stage pressing technology, and Residual oil rate is 1%.
3. Good oil cake, without burnt paste taste. High pressure in the chamber of this machine and pressure step by step, the oil can be extracted without frying.
4. Power Saving. The parts of this machine adopt processing and molding technology, with high finish, low mechanical loss and power saving.
5. It is easy to master. The machine adopts axial force decomposition technology, easy to operate without a lifting rod.
6. High durability and few failures. This machine adopts high toughness and wear-resistant steel. It can process 150,000-kilo oil without moving, with low resistance and good lubrication.
7. It benefits users a lot with less consumption, more output, less power consumption, less labor,  and good efficiency of the material.

We have soybean oil press machine for sale! Soy oil is rich in linoleic acid. Linoleic acid has limited effect on reducing the risk of heart disease. As linoleic acid is not heat-resistant, it is easy to oxidize and polymerize after frying or repeated heat, which is very harmful to health.

Press method is divided into two: general press method and screw press method. The common press method is now rarely used, especially in industrial mass production. The screw press method is relatively complex. The cylinder of the horizontal device is installed with a spiral shaft. After the pre-treated soybean enters in soya bean oil extraction machine, the oil is squeezed out as it advances. Continuous production can be realized in this way. But in the process of oil extraction, because of friction and heat, the protein is mostly changed to a greater extent.

Soybean oil from soybean oil expeller is commonly known as soybean salad oil and is one of the most commonly used cooking oils. Soybean oil is pressed from soybeans, including cold-pressed soybean oil from the cold press and hot pressed soybean oil from the hot one. The color of cold-pressed soybean oil is shallow, raw bean taste is weak. Due to the high-temperature treatment of the raw material, the oil yield is high, but the color is dark and has a strong smell of raw beans. Like rapeseed, soybean oil press can increase oil yield by slightly improving the press method.

Characteristics of soybean oil from soybean oil extraction machine:

1. High degree of unsaturation;
2. Liquid state at room temperature;
3. It can be selectively hydrogenated and used for blending with semisolid lipids or liquid oils.

The soybean oil cake extracted by the soybean oil machine can be used to make tofu. It can also be boiled to make soy milk.

Canola oil press machine is mainly composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The platters are ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. Distribution, vacuum, automatic heating and other standard components, are of well-known domestic brands for optimizing machine configuration; The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.

Points for attention before pressing of rapeseed oil press machine:

1. Pretreatment of rapeseed

Pretreatment includes crushing, steaming and peeling. The purpose of rapeseed peeling is to remove the main fiber and pigment body, otherwise, it will reduce the feeding value of the seed cake. Leather, on the other hand, is good for solvent penetration. (the leaching can improve the porosity of the blank). In theory, peeling (that is, removing 15 percent of the material) will increase leaching equipment capacity by 15 percent. Remove these black skins before leaching and the oil is lighter. The dry peeling of rapeseed can adopt different technologies, such as pneumatic impact, cracking between rolls or deformation cracking. The deformation cracking effect is the best and oil loss rate is the lowest.

2. Use rapeseed to make oil

Rapeseed is first rolled to destroy the seed layer and rupture the oil cells. The steam stir-fry can rupture the remaining intact cells, improve the oil bead aggregation, increase the fluidity and passivate the enzyme, especially the mustard enzyme. Put stock in steaming in the frying pan, steaming Fried within 77 ~ 100 ℃ 15 ~ 20 min (depending on the rapeseed varieties). In most cases, the oil content can be reduced from 42% to 16% ~ 20% by pre-pressing the rolled and steamed blanks. This prepress process compresses the fine seed cake into a large sheet. The seed cake was leached with hexane solvent to extract most of the remaining oil. Puts leaching pulp steamed off-line (DT) with steam spray treatment of 30 min (temperature is 100 ~ 130 ℃), thereby removing hexane, improve the quality of meal nutrition (by removing volatile mustard glucoside).

Mustard seed is still rare in the oil crop which can be used in the oil expeller in China and the plant area is not so large. Mustard seed is the seed of the cruciferous family plant, including black mustard seed, yellow mustard seed and white mustard seed, brown mustard seed, and 3 other kinds. Due to the development of science and technology in recent years, mustard seed has been gradually found in medicine, entering lung and stomach meridian. It is often used to treat cough and wheezing of phlegm, chest swelling, and pain, limb numbness, joint pain, gangrene, etc. In recent years, it has been found that mustard seed contains isothiocyanate, erucic acid, phenolic substances, phenyl, and other chemical components, and has many physiological functions such as anti-cancer and anti-bacterial. Mustard seed processing products are very popular seasoning. Therefore, people gradually began to realize the high value of mustard seeds. Mustard seeds, of course, do the same thing. Hence people gradually realize that mustard seed oil is a good alternative.

Which kind of mustard oil press machine should you choose? Because mustard seeds are also part of the Cruciferae family, the seeds are slightly smaller than canola. It can be pressed according to rapeseed press method. For example, double - elephant screw oil extraction machine can be. Given the popularity of canola oil in nutrition, the prospects are promising. It is believed that with the increasing planting area of mustard seed, the market of mustard seed oil extractor will expand continuously.

Regarding the price of mustard seed oil extraction machine, welcome to our Guangxin oil extraction machine to consult the technical problems of oil expeller.

The correct installation method of corn oil extraction process:

Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the lubricating oil added in the gearbox shall conform to the requirements in the specification. After polishing and cleaning, the equipment of corn oil extraction machine must be arranged according to the original position when installed. Because the arrangement position and order of the circular arrangement have a great relationship with oil extraction performance. After the circular platen is installed, press it with the pressing nut. After the above treatment, the corn oil press equipment can be fixed on the foundation with anchor bolts. When the equipment of corn oil extraction machine is installed, the motor's belt pulley should be aligned with the belt pulley of the oil extraction machine. They should be in the moderate position and correct rotation direction. The belt tension should be adjusted properly.   

The process of extracting corn oil from corn oil press machine

1. Water embellish

According to the difference between the endosperm and the germ, make the corn husk and germ absorb water. The germ is highly absorbent and expands after absorbing water. The germ increases toughness and elasticity and does not break when breaking grits or crushing grits, making it easy to break away from the embryo. After absorbing water, corn husk is easy to peel, and at the same time, it is helpful to separate from the embryo and reduce the phenomenon of the intercalated or intercalated embryo. This improves the embryo rate and the purity of the germ.

2. Peel and break grits

After the corn is moistened with water, the grits are then peeled and broken. During the operation, the degree of dermal breakage should be strictly controlled to ensure that the germ does not carry the skin and the skin does not carry the germ. Grits are broken into several lobes by a horizontal three-section sand roller. The germs are separated from the endosperm in large amounts as the corn is broken.

The proportion of grits and embryos was different. The proportion of grits was 1.30 ~ 1.35 grams/cm³, and the proportion of embryos was 0.78 ~ 0.99 grams/cm³. The separation effect can be effectively controlled by adjusting the height of the grits and the baffle. The extracted germ is then sent to a windscreen to extract the husk from the embryo to improve the purity of the embryo.

3. Embryo screening

The selected embryos still contain grits. We can put them into the grinding machine to press the embryos, and then screen them with the horizontal.

4. Purification

The grits, powder, chaff and other impurities in the germ should be screened out with a vibrating screen before being pressed, so as to improve the purity of the germ as much as possible.

5. Dry

Generally, the water content of corn germ is 11 ~ 15%, and its suitable water content is less than 4%. Therefore, it is necessary to conduct thermal drying on the extracted germ, so that the water content of corn germ can reach less than 4% before being pressed into the machine. The drying methods used are fire drying, steaming wok and mechanical drying.

6. Press

Most of the corn oil press equipment used are type 95 and type 200. With its own baking equipment, it guarantees the extraction of the germ.

We have coconut oil press machine for sale!

Coconut oil, made from coconut meat (copra) processing, has a wide application. It can be used in detergents, resin, paint, soap, and other processing industry. Through refining, it can even be edible with high nutritional value. In China's Yunnan, Hainan, Taiwan, coconut planting is wide. It is a very good investment project to process coconut oil in this regions.

There are many options to process coconut oil. The widely used is the squeezing method. The coconut oil can be produced by directly pressing it through the copra oil press. Cold pressed coconut oil is made from fresh coconut, retaining the inherent odor and nutrition. As for general coconut oil, the general press can meet the requirements. For the high-quality cold oil, we should choose cold pressing and reasonable equipment.

The copra oil expeller machine adopts the pure physical method to press the oil. No reagent is added in the production process, which ensures the safe, healthy, pollution-free and non-additive edible oil. It also ensures the original ecology and natural nature of the pressed oil. Thus coconut oil press machine enjoys great popularity among people. The production of oil press is transparency. Consumers can watch the whole process so that consumers are completely relieved. It is the first choice for whether gift or consumption. Therefore, more and more people choose to join the oil extraction industry, and more and more fresh oil workshops appear in our life. They bring convenience to consumers while reassuring consumers.

Coconut oil expeller machine is a new multi-functional screw oil press which consists of the automatic control box, heating press part, adjusting part, driving part and vacuum filter part. The speed reducer of screw oil extraction machine has high wear resistance, which can effectively prolong the service life of oil extraction machine and save energy and electricity. With the three-stage press, the oil output rate is higher and productivity benefits are higher.

YZYX70ZWY is a integrated oil press combined the function of roaster(heating the raw materials), the oil pressing and the oil filtering. It has advantages of easy operation and high oil yield.

Main equipment parameters of YZYX70ZWY Integrated Oil Press

YZYX70ZWY automatic temperature control integration oil press is suitable for squeezing high-grade oil material, like sesame, shelled peanut and sunflower seeds, etc. It has seeds roaster, machiner heater, oil press, and oil filter, has advantages of easy operation and high oil yield etc.

The structure of this combined oil press is compact, only requiring a small working place and saving labor. It is the ideal equipment for processing oil lively at the supermarket, grain oil shop and farmers market. The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.

Working principle of YZYX70ZWY Integrated Oil Press

The oilseeds after fried by the electrical frying pan fall into the squeeze chamber to be pressed. After transferred by the triangle belt and decelerated through the deceleration part, the electromotor drives the spiral. The oil plants fall to the first section of the spirals through the feeding part and carried forward toward the direction for the cake out along with the rotating squeeze spirals. As the space between the squeeze spirals is getting smaller, the oil plants are squeezed and the pressure in the press cage is getting bigger. The oil plants fractionate with each other and at the same time the oil plants fractionate with the spirals and squeeze loops. During this process, the oil plants are smashed and generate a big amount of heat. The tissue cells are destroyed and the oil is separated from the oil plants and then discharged from the squeeze bars, and the oil grooves on the squeeze loops. This is the whole squeezing process. The oil plants turn to be cake containing low oil after the oil is extracted out and discharged in thin slices from the circle space between the cake adjuster and the loop for the cake out. The oil extracted from the oil plants gathered on the top part of the filtration vat. The vacuum pump extracted the air in the vat and forms the negative pressure in the vat. Then the oil is absorbed in the vat and the residue is left on the filtration cloth. When the oil in the vat reaches a certain quantity, it can be released (oil in the vat cannot exceed the top level of the observer, otherwise will affect the filtration effect.) The two vacuum vats alternatively work, so the oil press can continuously work.

We have small oil press for sale! For small oil factory using- the processing capacity from 50kg/h to 200kg/h, with the characteristics of the small investment, wide compatibility, high efficiency, low consumption, simple operating, stable function, easy maintenance, high productivity, and high oil output.

Small And Medium Scale Single Oil Press Machine have the models as below:

Note:

This weight has no electro-motors weight.

① It is normal that sometimes the actual results may be a little different from those in the index because the oil plant’s type, quality and original content may be different in different areas.

② The day capacity (t/24 h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.

The small screw oil press produced by our company is suitable for squeezing vegetable oil from rapeseed, cottonseed, soybean, shelled peanut, flax seed, tung oilseed, sunflower seed, palm kernel, etc. The product has characteristics of the small investment, high capacity, strong compatibility, and high efficiency. It is widely used in the small oil refinery and rural enterprise.

Main Features of Small And Medium Scale Single Oil Press Machine

Below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking, cooking, etc.

Applicable oil plants and Business of Small And Medium Scale Single Oil Press Machine

1. More than 30 types of oil plants, such as rapeseed, cottonseed, soybean, shelled peanut, flax seed, sunflower seed, palm kernel, etc.
2. Uses in oil factory, oil mill, and privates oil production workshop.
3. Good both for pressing raw oil material and roasted oil material.
4. Performs well both in cold pressing and hot pressing.
5. The lower residue oil of the dry cake.

The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.

Contact Us

As a professional of screw oil press machine, Guangxin has designed for various needs of oil press machine china from the customers worldwide. The brand "Guangxin" oil press has always been highly admired since its foundation. The main product, screw oil press, used to press oil from various oil plants, with different functions combined with the oil press machine.

Guangxin manufacturer has a professional technical service team, providing timely and comprehensive guidance and service for customers. As a strong brand for screw oil press, Guangxin has been kept on upgrading technology in the past 20 years, which is the promise to users, also a responsibility of Guangxin stuff. Adhering to the goal of "produce the better oil press for making better quality oil" leads Guangxin oil press into the world.

Oil Press Machine By Raw Materials

Guangxin oil press machine is suitable for the oil extraction of various raw materials including rapeseed, castor, coconut, corn, cottonseed, mustard, flaxseed, sesame, peanut, palm, soybean, sunflower, walnut, cashew, hazelnut, hemp, jatropha, neem, moringa, etc. Contact our experts, our professional technicians will help you choose a suitable oil press machine for you according to your demands.

Oil Press Machine By Size

Guangxin oil press is able to satisfy small, medium, and large production capacity. Choose according to your requirement. Or contact us, our techinicians will help you.

Oil Press Machine By Temperature

Cold pressed oil is the edible vegetable oil produced by pressing oil at a low temperature (40-60℃). The cold pressed oil is better in color. But the cold press oil press is less fragrant. Cold pressed oil does not foam when it is eaten, and is suitable for frying.

Hot pressed oil is a product oil formed by physical pressing after high temperature (120-130℃) frying. The vegetable oils consumed in our daily life are mostly hot pressed oil. The hot pressing features high oil output and simple operation. The hot oil is pure and fragrant, especially the oil of sesame and peanuts, which are rich in oil and more fragrant.

Guangxin oil press machine is suitable for both cold oil pressing and hot oil pressing.

For small oil factory using- the processing capacity from 50kg/h to 200kg/h, with the characteristics of the small investment, wide compatibility, high efficiency, low consumption, simple operating, stable function, easy maintenance, high productivity, and high oil output.

Product Description

Small And Medium Scale Single Oil Press Machine have the models as below:

Note:

This weight has no electro-motors weight.

① It is normal that sometimes the actual results may be a little different from those in the index because the oil plant’s type, quality and original content may be different in different areas.

② The day capacity (t/24 h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.

The spiral oil press produced by our company is suitable for squeezing vegetable oil from rapeseed, cottonseed, soybean, shelled peanut, flax seed, tung oilseed, sunflower seed, palm kernel, etc. The product has characteristics of the small investment, high capacity, strong compatibility, and high efficiency. It is widely used in the small oil refinery and rural enterprise.

Main Features of Small And Medium Scale Single Oil Press Machine

Below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking, cooking, etc.

Applicable oil plants and Business of Small And Medium Scale Single Oil Press Machine

1. More than 30 types of oil plants, such as rapeseed, cottonseed, soybean, shelled peanut, flax seed, sunflower seed, palm kernel, etc.
2. Uses in oil factory, oil mill, and privates oil production workshop.
3. Good both for pressing raw oil material and roasted oil material.
4. Performs well both in cold pressing and hot pressing.
5. The lower residue oil of the dry cake.

The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.

We have small oil press for sale, just contact us!

The automatic temperature controlled integration oil press is built up with electricity controlling part, electric frying part, and auto heating & squeezing system, vacuum filtrating system.

The electrical frying part mainly consists of an electrical heating device, insulating material, frying pan, and churn, etc.

The auto heating and squeezing department mainly consists of heating part, squeeze cage part and squeeze spiral part etc.

The vacuum filtration department mainly consists of electromotor, vacuum pump, oil and gas separator urn, valve, vacuum pipe etc.

"Guangxin" brand is a top brand for oil press machines. The manufacturer Sichuan Guangxin Machinery of Grain and Oil Processing Co., Ltd, has always been in the top techniques and markets. It has been exported to over 80 countries in the world and looks forward to establishing long term cooperation with users, distributors and trade companies worldwide.

The integrated oil press machine is a new advanced designed model which suits for high-grade oil materials like the shelled peanut, sunflower seeds, and sesame etc. The machine has the advantages of easy operation and high oil yield. Customers can get clean oil from this model.