Blogs/News/PSAs

Are you looking for air shower china?

Overview

When people and goods enter the clean area, they need to be blown through the air shower room. The clean air can remove the dust carried of people and goods, and can effectively block or reduce the dust source from entering the clean area. The front and rear doors of the air shower/ cargo shower are electronically interlocked and act as air locks to prevent unpurified air from entering the clean area.

Air Shower Features

The intelligent voice air shower room has a voice prompt system. During the blowing, the automatic voice system prompts people to complete the entire dusting and dust removal process in an orderly manner to achieve an effective purification effect, and the clean air flow filtered by the high efficiency filter is rotatable. The nozzle is sprayed from all directions to the body to effectively and quickly remove dust particles, and the removed dust particles are then filtered by the primary and high-efficiency filters and recycled to the air shower area. 
WONZONE is a reliable air shower china manufacturer, we can custom air shower room according to your needs, welcome to contact us!

Structure Configuration

1. 
   Automatic control, single-person single-drying room system adopts PLC intelligent control means. The LED display on the control panel can correctly display the operating status of the air shower, the interlock status of the double door, the progress of the air shower cycle and the opening of the door. It is equipped with a photoelectric sensor, a one-way air shower, which enters from the non-clean area. After the door is closed, the infrared sensor senses the person. After the shower, the entry lock will be closed, and the air shower room can only be removed from the door;
   2.Single blow shower room motherboard soft key touch-type time relay, LED display and set the shower time, the range is adjustable in 10-99s, it can adjust the blowing time according to the difference of the environment outside the wind shower;
   3. Modular structure, single-person single air shower room with modular design;
   4. High performance, high sealing, using imported electronic components, stable and reliable running performance, advanced noise reduction and quiet device system and EVA sealing material, high sealing performance.

The Application of Air Shower

Air shower room is used in micro-electronics, optoelectronics, semiconductor, medicine, food, chemical, aviation, automotive, printing, laboratory and other dust-free workshops and non-dust-free workshops, ladder cleanliness workshops, for any other low cleanliness rooms.  In the process of entering a high-clean room, more than 0.3 micron dust particles can be in each part of the room to avoid contamination after entering the clean room. At the same time, it also acts as a buffer for airflow, because in the process of opening the door, with the flow of air, the air shower chamber stops the airflow in the air shower chamber well, which avoids the air pollution caused by the air flow.

Other Notes of Air Shower
1.Payment : T/T, L/C.
2.Transportation : Shipping, Air Freight.
3.Packaging : Carton, Wooden Box.

SAND PAPER ROLLS

Are you looking for cheap sandpaper rolls?

Application:

Riken RMC C45PM is super coated and it prevents clogging and static. Riken RMC C45PM is widely used in the furniture industry, musical instrument production, floor grinding, and lacquer grinding. It can be made into the wide belt, narrow belt, a disc which can be installed on the hand pressure sand machine, wide belt machine and drum pneumatic sander. Long-life when grinding the MDF board, HDF and other board. Supply perfect anti-clogging thanks to the special stearate technology. Best polishing surface thanks to the best grade silicon carbide grains.

High stock removal rates and excellent polishing scratch pattern.

Specifications:

As a professional abrasives supplier in China, ZIBO RIKEN has become many well-known international companies’long-term partners. We believe that achievement in Safety, Health and Environmental performance is a mindset, which begins daily and to be carried out through everything we do. Welcome to contact us for bulk abrasives.

We have diamond powder for sale!

CBN micron has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified systems, for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing. It works as free grinding particles and pastes as well.

CBN micron powder features good performances in thermal stability, self-sharpening ability, and grinding efficiency. It is suitable for resin, metal, and vitrified bonds. It is used for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing, also used as free grinding particles and paste.

E-Grind supplies all sizes range of CBN micron powder. With advanced equipment in productions and testing, the quality of our CBN micron powder is on the high end and help customers get premium finishing surface.

CBN-EW2

Black, Blocky, high purity, high grinding efficiency. Uniform size distribution control.

Application: lapping and polishing ferrous, for making honing stones and PCBN as well.

 CBN-EW3

Black, Blocky, high purity, high grinding efficiency. Uniform size distribution control.

Application:lapping and supper precision processing, for making honing stones and PCBN as well.

CBN micron Sizes Available:

EGrind Abrasives is professional in diamond and CBN products with over 50 years experience. We sincerely invite and welcome people from all around the world to invest and create more values together.

Are you looking for wallet boxes wholesale?

When it comes to wallets, the first thing that comes to mind is LV wallets.A world-famous brand is also a brand pursued by millions of women. Purses from well-known brands are usually packaged in more fancy boxes.Different.Because women pursue beauty, the requirement of buying an article is not only that the product itself should meet the aesthetic needs of buyers, but also that even the packaging box will have higher requirements, because this is a whole class.

Almost all wallets come with a beautiful wallet box, and we provide most wallet brands with a large number of custom wallet boxes and professional design advice to help you expand your wallet sales share.

Your Best Choice for wallet gift box

Wallet packaging box, the wallet enterprise logo and brand image spokesperson printed on the wallet box, the unique design of the wallet box is also very conducive to brand building. We can offer purse boxes for women, purse boxes for men, long purse boxes and short purse boxes. We have a very successful experience in customizing purse boxes.

If you need mass custom packaging, we can provide you with free packaging design to address your custom packaging concerns. Different packaging structure design means that the product packaging is different, the cost of customized packaging is different. We focus on the packaging box every detail of the design changes, the impact on your product sales and beauty, and strive to make your packaging box design to achieve the most perfect, to help you design satisfactory to meet the needs of the market box. If you need us to provide packaging design scheme, or if you have any specific problems need to consult us, please send email to us, we will reply to you in the shortest possible time.

Guangzhou Extra Link Printing & Packaging Co.,Ltd.is a professional product packaging manufacturer in China. We focus on every details from printing job to paper packaging hand working job is what we are always doing for years. Please don't hesitate to contact us, let's start the cooperation and build a long-time business relationship.

Clear plastic tubes, rounds and ovals really stand out in a sea of rectangles on store shelves. We apply the same high-quality printing and decorating techniques to our rolled-edge tubes for a one-of-a-kind shelf presence. Our hair packaging tubes are extremely sturdy, providing a prestigious look and feel.

We've also developed round clear plastic tubes with tapered sidewalls that nest for improved shipping efficiency, while providing a distinctive shelf appearance. And in addition to standard and tapered plastic tubes with glued side seams, we offer rolled-edge tubes that are sonically sealed for applications where adhesive-free clear tubes are preferable.

HLP Klearfold is the world's largest producer of transparent packaging inc. We are committed to providing the highest standards of customer service. And We sincerely invite and welcome people from all around the world to invest and create more values together.

4-(2',4'-Dimethoxyphenyl-Fmoc-aminomethyl)-phenoxyacetamido-rink amide AM resin

This am resin comprises the modified Rink amide linker attached to aminomethyl resin, and is an ideal tool for the Fmoc SPPS of peptide amides. Cleavage from this resin can be effected by single step treatment with 95% TFA, providing peptide amides in high yields and purities.

In recent years, the wafer industry has developed rapidly, but at the same time, it also produces a large amount of wastewater. The production wastewater mainly comes from the cleaning process of the polysilicon ingot slicing process. The acid-containing wastewater is produced in the cleaning process after the surface treatment of the polycrystalline silicon ingot with the mixed acid. Since the surface treatment is a mixed acid of nitric acid + hydrofluoric acid, the main pollution in the washing wastewater is pH, fluoride, and nitrate. The organic wastewater is produced in the cleaning process of the sliced polycrystalline silicon wafer. Since the cutting fluid (the main component is polyethylene glycol) and the cut micro powder (the main component is silicon carbide) are used for slicing, the main pollutant in the cleaning wastewater is CODCr and SS.

Polysolicon membrane cutting fluid is made up of polyethylene glycol as the main body and added with various additives. It has a suitable viscosity index, good fluidity, and thermal conductivity, and has good dispersion stability and suspension effect on silicon carbide micropowder. A large amount of waste liquid is generated after cutting, and the waste liquid contains a considerable amount of polycrystalline silicon powder, which has a certain recovery value. The polysilicon powder is recovered by the ceramic membrane separation technology, becoming the so-called cutting fluid recovery. And the site is clean and sanitary, which is in line with the national energy-saving and emission-reduction industry orientation.

Ceramic membrane equipment technology is advanced and mature, with low operating costs and fast return on investment.

Ceramic membrane filtration process can directly deal with the waste liquid containing silicon produced in the solar energy production process, collect silicon, reuse pure water and coolant.

The process can separate silicon powder and pure water, recover over 98% of the silicon powder, reuse more than 90% pure water,reuse about 50% of coolant and shaping agent , which can greatly reduce the load of the sewage station.

The process has the advantages of short process, simple operation, short payback period, and has become the preferred standard process for the benchmarking enterprises in the silicon chip industry.

JIANGSU JIUWU HI-TECH CO. LTD.,founded in 1997, focus on producing ceramic membrane for many years. And JIUWU HI-TECH has become a leading company in the membrane separation industry. We sincerely invite and welcome people from all around the world to invest and create more values together.

Precisely speaking, stuffed bear toys that we usually see are not real teddy bears. Just like cars can have different shapes, specifications, and brands, plush bears have variety of brands, styles, appearances and even designers. There is no way to represent all the bears with teddy bears. However, because the teddy bear is too widely used, the plush toy bear is often called teddy bear.

The teddy bear was originally an independent and proper noun. The most correct statement was that only before the first World War, when the old president Roosevelt was in office, the bear made from 1903 to 1912 could be called the teddy bear.

The teddy bear born in 1903 is derived from President Roosevelt's love for raging and the prevailing popularity, which can be described as an old ancestor of a plush bear. It has a round body and limbs, made of fluffy Angola wool, simple materials and embroidered lines, simple expression, and one hundred percent manual sewing and packing. Whether it is from the US or Europe, those spirits that have been left behind in the past are still there today.

But this real teddy bear, even the so-called antique bear, is not as much opportunity to be spot as it used to be. Only in books, museums, or collectors' homes, we have a glimpse of their true face. However, the teddy bear, which no longer returns, has been reborn again, with the revival of the old fashioned and historical memories, and the idea of auction and collector's preservation.

Wholesale stuffed puppies with clothes classic sweater puppies dolls

We offer cheap plush teddy bears wholesale. These are classic teddy bears series. You may find them in those films that there always a cute teddy bear in the girls arms. That’s the style you saw here. They have clothes which could be put off and on whenever you want. This style almost is the most popular one among all the plush animals. Any materials here used are environmental friendly and pollution free. CE norms are guaranteed. Samples could be provided, but a small amount of freight will be charged.

Teddy bear stuffed animal is a stuffed teddy bear for children to play. It is a stuffed toy with a long history, which is often used to comfort the children's sad feelings. In recent years, some teddy bears have become expensive collectibles.

Teddy bears are named after US President Theodore Roosevelt, because Roosevelt's nickname is Teddy, and he likes hunting very much. It is said that the name of the teddy bear originated from Roosevelt's hunting bear in Mississippi in 1902. At that time aides found and caught a small Louisiana black bear, and Roosevelt refused to kill the bear and described it as "unsportsmanlike", and a political cartoonist quickly published the story of Teddy's Bear. The first cartoon appeared on the second day, November 6th. Clifford K. Berryman, a cartoon editor of the Washington Post, recorded this in the form of a front page comic book, Clifford K. Berryman. Berryman painted a bear sitting on the ground, Roosevelt holding a gun, with his back to the bear, and refused to kill his prey. Below the picture is "Drawing the Line in Mississippi", linking hunting anecdotes with political arguments.

Delivery Information of Teddy Bear Stuffed Animal

Min.Order Quantity:

1000 Pieces

Date of delivery:

40 days since deposit

Port:

SHANGHAI

Payment Terms:

L/C,T/T (30% deposit, balanced against B/L )

Quick Details of Teddy Bear Stuffed Animal

Although We have dedicated ourselves into high performance composite deck flooring wholesale for 10 years, there is no end on technology and performance, we treat every client as our long cooperation friends, to decorate your yard more beautiful, to make your WPC decking projects more stable and attractive.

You will always find the composite decking decking you need, because Sundi has the most comprehensive series of china wood plastic composite decking from co-extrusion decking to deep pattern decking, from traditional decking to Adamas decking, from rubber co-extrusion decking to decking tiles, Sundi has the different production lines to produce different generation decking.   

 WHY WPC DECKING

Higher performance decking

Higher performance decking, the Adamas WPC performance is 2-3 times better of General decking, Sundi Adamas  decking keel span can reach 80-100 CM. This is the leading technology all over the world.

Complete ranges and diversified surface

Complete ranges and diversified surface, from General decking to Adamas decking, from Co-extrusion decking to Deep pattern decking. Here you will always find the decking you want, whatever the beautiful surface or high performance decking, so check our decking page.

Excellent dimensional stability

Excellent dimensional stability(3-5*10) and lower water absorption rate (1%), we are the technical plant to research more technologies on WPC, from the performance to outlook, so welcome you to send us your new idea to research the new type of WPC decking.

Adapt higher temperature area

The higher performance let Sundi decking can adapt higher temperature area or other hostile environment. Wherever you stay, Sundi WPC decking will be your best choice.

Sundi WPC: Dedicating to be one of the most professional wood plastic composite manufacturers in China! Nanjing Xuhua Sundi New Building Materials Co., Ltd is a high technology private enterprise and focuses (focusing) in researching and developing, producing, selling designing and application of the WPC.

Are you looking for cheap fit and flare wedding dresses?

Fit and Flare Wedding Dresses List

Asymmetrically Draped Tulle Wedding Dress #18509

Fit and Flare Wedding Dresses with Beading #18501

Halter Top Fit and Flare Wedding Dresses with Ruffled Organza Skirt #8453

Halter Top Fit and Flare Taffeta Wedding Dresses with Pickups #8449

Drop Waist Fit and Flare Lace Wedding Dresses with Draped Skirt #8446

Champagne Mermaid Lace Dress with Plugin Neck and Half Sleeves #6090

Blush Pink Dress with Plugin Neck and Ruffled Organza Skirt #6088

Fit and Flare Tulle Wedding Dresses

As the name has already indicated,fit and flare wedding dresses are tight fitted on top and then dramatically flare out,the silhouette is similar to a mermaid style,but it featured a tight fitted top until hip,and then flare out,compared to mermaid style,fit and flare style feels more comfortable while walking.

One More Couture offers a wide range of fit and flare wedding gown,sleeveless,cap sleeves,half or long sleeves,you can find the styles you dreamed of here.we also have a rich selection of fabric for you to choose from,soft chiffon,duchess satin,silk organza,vintage lace and more.

If you love some styles but want prefer drop waist fit and flare wedding dress,we can also make that come true.

High—frequency heat sealing/ high—frequency sealing machine / high-frequency welding machine / high—frequency plastic welding machine is the first choice of plastic heat sealing equipment. The principle is different from plastic welding machine with conduction of heat because it is the use of high-frequency electric field polar molecules to produce plastic torsion friction heat, and thus to achieve the purpose of welding. The welding temperature is uniform in the outside and the inside.

It is mainly used for all kinds of plastic welding, welding, etc., which are on the basis of PVC (PVC). And it makes blister with different shapes or blisters plastic to weld automatically as well as trimming at the same time. It is suitable to use for two-sided welding of plastic uptake, bubble shell of plastic uptake and for sealing paper card. For special plastic material (PE, PS, PETG) with sealing, the PVC material with more than 30% for plastic welding is the best. Plastic packaging contains (including two-sided blister, blister, and cardboard with heat)automotive interior leather, trademarks, stationery, raincoats, inflatable toys, plastic products, shoe cover, bed, cushion, bags, handbags and other soft sealing processing, pressing various concave-convex patterns, alphabet, bronzing etc..

※ The stabilization of frequency

Yu Fei high frequency sealing adopts the industrial band 6.78/13.56/27.12/40.68MHZ and designs a filter, bypass, isolation device which has a little interference to the outside equipment and reach 1/100 of radiant frequency in national standards according to the International Committee on radio interference (CISPR). It is far better than the national standard.

※ The suspension of sparks

Yu Fei high frequency with high sensitivity spark suppression circuit can accurately detect spark current imbalance, and to cut off oscillating circuit to suspend sparks quickly as they are produced in the instant, making minimize the damage to mold, raw materials, and products. In the meantime, the warning lights will raise up.

※ The automatic control of oscillating current

The oscillating current of adjusting the material thickness of Yu Fei high-frequency output power can be set according to the size and thickness of the products. And then the current will be regulated automatically to control the degree of welding in order to ensure the quality of products are uniform. Also, it can lower the consuming time of welding greatly and increase the productive speed of the machine.

The high frequency of Yu Fei is equipped with overvoltage and overcurrent protection device. It can automatically cut off the high voltage to protect the oscillation tube and rectifier when the work is abnormal and avoid the frequency drift caused by improper operation.

Yu Fei is committed to decades of research on high frequency and high frequency equipment. Their products are exported to India, Thailand, Ukraine, Turkey, Slovakia, Russia, and other countries. It is leading in technology whose new models maintains international leadership from the beginning to end. It is popular among the customers home and abroad and receives identical favorable comments.

As one of the most professional high frequency welding machine manufacturers in China, Liaoning Yufei High-Frequency Equipment Co., Ltd. is a renowned Chinese company specializing in hf pvc welding machine. Please feel free to contact us if you have any further inquiry.

For Better Experience and Management

1.Turnstile gates can be integrated with online booking system and checking modules to make an all-day self-service entrance lanes.1. Turnstile gates can be integrated with the online booking system and checking modules to make an all-day self-service entrance lane.

2. Ticket-escaping can be prevented thanks to the intelligent anti-tailing alarm system. One person, one ticket. Safe and efficient.

3. A lot of labor costs would be saved after turnstile gates being installed as fewer employees are needed for the ticket booking, verifying and collecting work.

4. Turnstile gates are for long-term operation as the cabinets are made from high-quality stainless steel which is waterproof and anti-corrosion. Besides, ZOJE has always been following the most advanced access control technology for the most reliable security products.

Convenient Self-help System for Tourists

Tourists can book tickets online or through mobile APP to get a QR code for scanning at the entrance. Paper tickets are also accepted by the turnstile gates.

Outdoor turnstile gates will improve the efficiency and accuracy of ticket checking and financial management. Besides, tourists would have a better experience as they can get access to the spot faster and more convenient than before.

Scenic spots equipped with turnstile gates tend to be more popular as tourists will take less time for the booking, ticket inspecting and so on. This way, more time is available for sightseeing.

Promoting Your Brand Image

Tripod turnstile gates are highly recommended for scenic spots solutions.

The turnstile gates will highly improve tourists' satisfaction and raise your spot's profile.

Customized solutions are available for all scenic resorts to make a safe, efficient and cost-effective touring experience.

If you are having a limited budget, tripod turnstile will definitely be your best choice. Otherwise, you can also consider flap barrier gates as they tend to be more elegant compared to tripod turnstiles.

All in all, welcome to write to us for your best solution. ZOJE is always ready to help.

Petrol breaker, well know as cordless breaker，petrol jack hammer or demolition hammer, is a petrol engine driven tool that consists of a hammer directly with a chisel. In traditional industries, manufacturers always apply to electricity or pneumatic to activate jack hammer. However, it is not convenient enough due to its limitation of other equipment. Pneumatic and electric jack hammer can't be moved too far from its power supplier, or you have to carry its air compressor or electric generator to complete your job in a big area.

Considering the limitation and disadvantage of pneumatic and electric jack hammers, we developed the first petrol jack hammer in China. The working principle is same, an internal hammer up and down in cylinder to drive the jack hammer. The hammer is first driven down to strike the back and then back up to return the hammer to the original position to repeat the cycle. The effectiveness of petrol breaker depends on how much force applied to the tool. It is generally used to break the hard surface, rock or stone in construction sites. They are representatively used to break up pavement, and concrete, split hard rocks, tear up foundation and etc. Of cause, to maximize its convenience, the weight of petrol breaker is around 14KG, it is one-man operate machine, a full-sized portable jackhammer makes it practical for breaking hard materials, but it is impractical to breaking against walls or against steep slopes by one person, as the user would have to both support the weight of the tool, and push the back against the work after each blow. And it needs to watch out falling rock, it must wear safety helmet in working size, also it is better to have an ear-muff to protect the ear from loud noise.

The gear set and strong steel of structure jackhammer to a top-quality petrol jack hammer. Our engineers designed the gear cover as the shape of transformers and we have the patent for this unique design, this small gadget help us and our distributors win business. We can supply concrete jackhammer sale, just contact us!

Vehicle exhaust remote sensing system receives more attention and reliability with its advantages of speediness, convenience and wide monitoring range, etc. It can monitor exhaust gas towards gasoline vehicles as well as diesel vehicles on the road and identify the high-emission vehicles among moving vehicles without affecting normal running. The system connects monitoring data, vehicle emission information and exhaust annual inspection data through modern communication technology to realize integrated management for vehicle emission data. For vehicle pollution prevention and management department as well as vehicle inspection institution, the establishment of the system can provide system support for general management towards the data of road exhaust pollution condition, over-emission vehicle capture and inspection data in detection field for specific vehicle.

Car emissions test equipment can divided into mobile remote sensing system and stationary remote sensing system. Stationary remote sensing system, which includes horizontal stationary type and vertical stationary type, can be installed on city primary roads for continuous vehicle measurement while mobile remote sensing system can decide measuring location and time, which becomes an effective complement for fixed point remote sensing measurement.

Feature of Vehicle Exhaust Remote Sensing System:

Movable Type:

Calibration system integration

Narrow-brand radar speed measurement, strong anti-interference ability

Convenient Optical path adjustment, 15-minute layout

WIFI wireless data transmission, convenient for site checking

Highly integrated design, small size and light

Horizontal Stationary Type:

Real-time data matching, convenient and accurate

Passive design at the reflection end, reduce installation difficulty

Adopt imported laser device with excellent performance and high reliability

Vertical multiple-point detection of vehicle position, measure exhaust gas more accurate and timely.

Vertical Stationary Type:

Real-time data matching

Gasoline-diesel integration design

Remote operation and management, convenient for operation and maintenance

Integrated intelligent calibration system, more convenient for operation

Optomechanics design with independent intellectual property, strong anti-interference ability

HANGZHOU ZETIAN TECHNOLOGY, established in 2008, is one of the most professional vehicle emission testing equipment manufacturers in China. Welcome you to visit us. Currently, we are looking for certificated distributor and OEM clients throughout the world. R&D cooperation is also welcomed. If you have any interest, please contact us!

Conveyors are used for product conveying. There are different types of the conveyor belt automation, which can be used for conveying various kinds of products.

Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency of processing or production. The products can be conveyed from one place to another. There are a large number of different types of conveyors designed to convey different types of products or perform specific tasks. Yiheda can provide you with customized conveyor.

The functions of feeding mechanism of CNC lathe

The functions of feeding mechanism of CNC lathe: The automated feeding manipulator of NC lathe can imitate some movement functions of the human hand and arm, and is used to grasp and carry objects or operating tools according to fixed procedures. It can replace the heavy labor to achieve mechanization and automation of production, and can operate in harmful environment to protect personal safety. The automated feeding manipulator of NC lathe is usually used as an additional device of machine tools or other machines, such as loading and unloading and transferring work pieces on NC lathe.

The use of CNC machine tools instead of manual labor can save costs, improve efficiency and reduce the rate of defective. At the same time, it liberates the labor, makes the tedious work flow simple and easy to operate, and greatly reduces the labor cost.

What is the assistant manipulator? What is the purpose of the assistant manipulator?

What is the assistant manipulator? It is a new kind of auxiliary equipment used for labor saving in material handling and installation. It skillfully applies the balance principle of force to form a gravity-free floating state of materials in the air, that is, the gravity of materials is balanced by the corresponding control system, so that the operator can balance the movement and positioning of materials in space only by pushing and pulling the materials.

The assistant manipulator balances the gravity of the object through the thrust or pull force generated by the cylinder to achieve the assistant effect. By detecting the end fixture of the sucker or the manipulator and balancing the gas pressure in the cylinder, it can automatically identify whether there is a load on the manipulator arm of the manipulator, and automatically adjust the air pressure in the balancing cylinder through the pneumatic logic control loop to achieve the purpose of automated balance. When working, heavy objects are suspended in the air to avoid collision between products.

Basic knowledge of the automatic conveyor for industrial automation

The basic knowledge of the belt conveyor is mainly divided into: daily maintenance knowledge, conveyor limitations and conveyor operation rules.

First, what are the daily maintenance of belt conveyor?

1. check whether the belt is degumming.
2. check whether spring is loose or deformed and replaced.
3. check whether the motor has abnormal sound.

Second, what are the limitations of the belt conveyor?

The gradient of belt, the length of conveying material, the nature of conveying material, the width of belt, the running speed of belt, etc.

In addition, there will be special belts for different materials; for example, the belt with bucket slope can be close to 90 degrees, and the gradient of pattern belt can also be relatively large.

Third, what departments are widely used in belt conveyors?

Large ones for coal and mining; small ones for electronics and electrical appliances, and some for chemical industry, tobacco, plastic, etc.

There are also food industries, such as biscuits, bread and so on. The belt conveyor is only one kind of conveying equipment. Conveying equipment is widely used in industries, such as automobiles, household appliances and so on.

Four, operation rules of the belt conveyor

1.The fixed conveyor should be installed on a fixed basis according to the prescribed installation method. Before the formal operation of the mobile conveyor, the wheel should be wedges with triangular or brake. In order to avoid moving in the work, there should be a one-meter channel between the machine and the machine, and between the machine and the wall when there are several conveyors working in parallel.

2.Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal and whether the protective equipment is complete. The tightness of the tape must be adjusted to a proper level before starting.

3.The belt conveyor should start at no load. After the operation is normal, the material can be fed. No feeding before driving.

4. When several conveyors are connected in series, they should start from the unloading terminal and start in sequence. After normal operation, the material can be fed.
5. When the tape runs off during operation, stop and adjust it, so as not to use it reluctantly, in order to avoid wearing edges and increasing load.
6. The working environment and the temperature of the delivered material must not be more than 50 degrees centigrade and less than -10 C. It is not allowed to convey materials containing acid and alkali oils and organic solvents.
7. No pedestrians or passengers are allowed on the conveyor belt.
8. Before stopping, the conveyor must stop feeding before stopping the material on the belt.
9. The conveyor motor must be well insulated. Cable of mobile conveyor should not be dragged or dragged. The motor must be grounded reliably.
10. When the belt slips, it is strictly prohibited to pull the belt by hand to avoid accidents.

What are the advantages of automated loading and unloading?

There are three main advantages of automated loading and unloading.

(1)High production efficiency: To improve production efficiency, we must control the production rhythm. Except that the fixed production and processing rhythm can not be improved, automated feeding and unloading replaces manual operation, so that the rhythm can be well controlled, avoiding the impact of human factors on production rhythm, greatly improving production efficiency.

(2)Flexible process modification: We can quickly change the production process by modifying the procedures and gripper fixtures. The debugging speed is fast, and the training time for employees is not needed, so it can be put into production quickly.

(3) Improve the quality of work pieces: Use robot automated production line. From feeding, clamping to blanking, it is totally completed by robots, which reduces the intermediate links and greatly improves the quality of parts, especially the work piece surface is more beautiful.

Overview

D205B is widely used for ceiling lamps and has a large detection angle.The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, America, Turkey and Europe.

Features

Low power consumption

Wide angle

Slight movement can be detectable

Applications 

Ceiling Lamps

Home security systems

Home Alarm System. As its ability to sense warm, moving objects such as people walking into a room is coupled with simplicity and cost effectiveness.

FAQ

1. Can PIR Sensor for LED lightdetect animals?

PIR sensors are excellent in human and animal detection. They are mostly used in triggering an intruder alarm and activate household appliances upon the presence of a human.

2. Do PIR motion sensor for lightswork through glass?

No, alarm motion sensors do not work through glass. Most motion sensors use passive infrared (PIR) technology to detect motion. Changes in IR energy are not easily detected through glass. This is why motion sensors will generally not work through windows, which are usually insulated.

1. Alow angle shot.You can do a lot of these different moves but from a low angle try to change your angles when you're working with a gimbal so when you get down low and point up you have that super dramatic low shot and the beauty of the crane 3 lab is you have this handle on top that allow you to get these super low shots very easily. It's easy to maneuver from your different positions because the way that the handle set up on this gimbal so with the low shot, you could basically recreate any of the moves that we've talked about but just bring the camera super low and point up at your subject. is a reveal so

2. You're gonna want to use the follow modeand what we're gonna do is go from thesky and pan down into your subject and follow them so whether the person is stationary or moving you can use this follow mode start looking at the sky and then slowly tilt down on the gimbal to reveal your subject in the frame, just make sure that you feather in on both sides so you have no jolting motion the whole idea behind a gimbal is smooth dreamy like footage so you're going to want to feather as much as possible.

3. Another sort of revealbut you're basically going to bestarting on someone's feet and then moving up to their heads so it's a kind of person reveal or an object reveal where you start on one aspect of it and move up to another you're gonna want to make sure that if you're using any longer lens you just lock that focus in and then make the move from bottom to top and what you're gonna do is just move your hands from down low to up high to be able to get this kind of a shot.

4. Afun one and this is a jib shot so jibsare big pieces of equipment that allows a camera to get these sweeping shots from way high to way low, with a gimbal you can attach a monopod and then you can get a much higher sweeping motion so a couple notes when you're working with a jib leg shot I suggest using a wider lens because you'll be able to see more of the motion in the actual frame and then also you're gonna want to put it on the tilt lock mode so either start high and come down onto your subject or start down low and then sweep up high to reveal the bigger scene that going on.

5. APOV whip and basically what happens is the camera follows you super fast so it's the follow mode but it has a quick reaction time when you're actually using this mode so the purpose of this is basically you can have your gimbal getting smooth footage whatever motion that you want but then when you want to do a transition to another scene or another shot you can whip and when you put these together and you add a little motion blur on the top of this it creates a seamless transition from one scene to the next. 

If you are interested in gimbal, welcome to www.zhiyun-tech.com .

ABRASIVE CLOTH

What is 600 grit emery cloth?

Application:

The backing of RMC & Riken abrasive cloth AX67 is X wet cloth, which is with good synchronous, ideal for making the abrasive belt, flap disc, quick-change disc and so on. It has a good effect on sanding wood, hardware, stainless steel and so on.

RMC & RIKEN abrasive cloth AX67 is with high cutting performance, good finish and very long use life in wood & metalworking. RMC & RIKEN abrasive cloth AX67 gives better sanding and a cleaner work environment.

Specifications:

As a professional abrasives supplier in China, ZIBO RIKEN has become many well-known international companies’long-term partners. We believe that achievement in Safety, Health and Environmental performance is a mindset, which begins daily and to be carried out through everything we do. Welcome to contact us for abrasives for sale.

All we know, Shirts belong to the clothing category of products, there are men's, women's, even children's shirts. There are many kinds. Therefore, for the packaging, there is the corresponding packaging to decorate the product.

T-shirt storage box    for men and women

First of all, men's shirt boxes, most of the design of men's shirt boxes are gray or black series. The design is also very simple. Most only prints, matt or glossy lamination, are made from pits or cheaper gray materials. A few boxes will be made in hardcover, even gilded, embossed, or engraved. Women's shirt boxes are beautiful. Pink, red and gold dominate. The design is feminine. Box generally USES high-grade corrugated board box. Because women's shirt, some price is lower, so use the corrugated board is the best choice, also can make a pretty box with a cheap price.

Shirt boxes for children

Children's shirts are designed to look like cartoons. You can put characters from the most popular cartoons in t-shirt packing box  , which is definitely a bonus for packaging. When a child buys his favorite shirt and has such a favorite package, the popularity of the whole product and customer loyalty will be greatly enhanced. What a wonderful thing.The better the shirt, the more comfortable it needs to be. So, the better the shirt, the better the fabric, and the good fabric is always thin and crisp and flowing. Unless you often have to attend upper-class parties, you don't need to easily choose a silk shirt. For most business elites, high-count cotton is a good and safe choice for shirts. And good clothes can be matched with the corresponding silk paper mount ash board, made into a hardcover box to package. Or can choose pure cotton cloth directly mounted gray board.

So there are any manufacturers, customers need to do a shirt box, welcome to contact us!

Guangzhou Extra Link Printing & Packaging Co.,Ltd.is one of the most professional printing and packaging companies in China. We focus on every details from printing job to paper packaging hand working job is what we are always doing for years. Always feel free to inquiry!

According to a recent eye-tracking and qualitative research study conducted by Package InSight, a partner of Clemson University's Packaging Sciences School, consumers would rather see a product through a clear folding carton than see an image of a product printed on a paperboard carton (click here to download a copy of the study's White Paper).

HLP Klearfold is the clear packaging specialist… we have been manufacturing custom clear plastic packaging exclusively for 50 years with custom design service, and we are the world's largest and most accomplished producer of plastic folding cartons. We also produce a broad array of other clear packaging options, like plastic tubes and rounds, custom thermoforming, and innovations like the Klearfold® Keeper and InSight® packaging systems.

HLP Klearfold is the world's largest producer of custom clear packaging. We are committed to providing the highest standards of customer service. And We sincerely invite and welcome people from all around the world to invest and create more values together.