Blogs/News/PSAs

If you need to mix the powder, the powder mixer machine can be a good choice for you. Due to the different requirements for the use of powder mixing machine in different production sites, the classification of hybrid equipment has gradually increased. Now vertical mixing equipment is widely used. However, this kind of equipment is not suitable for all processing factories. It is generally recommended to select horizontal powder mixing machine when mixing granular materials, so as to improve the mixing efficiency of materials. The processing speed is also significantly improved. When purchasing the mixing equipment, the following aspects should be paid attention to.

There are differences in the output of different types of powder blending machine. Not all mixers can meet the processing capacity standard. In order to make the installation and application of equipment meet the application needs of manufacturers Therefore, the equipment should be selected according to the daily output. The mixing equipment can complete the operation process within ten minutes when processing a batch of materials. Next, the equipment finishes output, the discharge process is almost finished. So the mixing equipment can basically complete four processing operations in an hour. if select equipment not in accordance with the actual production standards, we can not achieve the application purpose.

When purchasing the powder mixing blender machine, it is also necessary to pay attention to whether the discharging method of the equipment is reasonable. When using the mixing equipment to process the materials, the discharging method of the materials is very importan. When selecting the discharging method, it can be done through the side exit. You can also customize the appropriate valve and outlet according to the production requirements. but if you choose the outlet improperly, it will also have a great impact on the output, So we should pay attention to this problem.

As one of the leading powder mixing machine manufacturers from China, Niel Machinery supplies professional powder mixing machines. Welcome to buy our equipment.

The ribbon mixer machine is generally used for the mixing of viscous or cohesive powder particles and the mixing of liquid and paste materials added to the powder particles. At the same time, due to the difficulty of cleaning viscous materials, it is suitable for the mixing of large output and infrequent variety change.

Structural features of spiral ribbon mixer

The spiral ribbon mixer is composed of a U-shaped container, screw belt mixing blade, and transmission parts; U-shaped long cylinder structure ensures the small resistance movement of mixed materials (powder and semi-fluid) in the cylinder. The positive and negative rotating screw bars are installed on the same horizontal axis to form a low power and efficient hybrid environment. The screw belt blades are generally made into two or three layers. The outer spiral collects the materials from both sides to the center, and the inner spiral transports the materials from the center to both sides, which can make the materials form more vortices in the flow. The mixing speed and uniformity are increased.

Application of spiral ribbon mixer

Horizontal ribbon blender is widely used in the mixing of putty paste, real stone paint, dry powder, putty, medicine, food, chemicals, feed, ceramics, refractories and other solid-solid (i.e. powder and powder), solid slurry (i.e. powder and glue liquid), especially for the mixing of viscous materials. The mixer is not suitable for materials with large fiber content and density difference. For the putty paste, real stone paint, biology, medicine, food and other industries, stainless steel is recommended. In general, the horizontal screw belt mixer is recommended for mixing the dry powder sand slurry containing vitrified beads.

Niel Machinery supplies a series of professional powder mixing machine. If you want to know ribbon mixer price, please leave a message or contact us via sales@shniel.com.

The main shaft of the ribbon mixer machine is wound with two layers of screw belts in different directions. Driven by power, the material is quickly stirred. The equipment has the characteristics of better mixing uniformity, higher production efficiency, and extremely low failure rate. The equipment is a batch mixer, according to how many materials are handled in each batch to select the appropriate equipment model.

1. Flexible material selection scheme of spiral ribbon mixer

The spiral ribbon mixer can be customized with carbon steel, manganese steel, 304 stainless steel, 316L stainless steel, 321 stainless steel, and other materials, and different materials can also be used in combination; when selecting materials for equipment, it can be divided into parts in contact with materials and parts not in contact with materials;

In addition, functional coating or protective layer such as anti-corrosion, anti-adhesion, isolation and wear resistance can be added in the screw belt mixer;

The surface treatment of stainless steel includes sandblasting, wire drawing, polishing and mirror surface treatment, which can be applied to different parts;

2. Reliable drive configuration of ribbon mixer machine

The small ribbon mixer is equipped with driving devices with different capacity, power and output speed according to the material property, starting mode and mixing mode.

The drive motors include: ordinary motor, anti-riot motor, variable frequency motor, high efficiency and energy-saving motor, high protection level motor, and motor under different voltage; common reducer: R, K, F series gear reducer, cycloid pinwheel reducer, general gear reducer, planetary gear reducer;

Common connection methods: direct connection, pulley connection, hydraulic coupling connection.

As one of the leading ribbon mixer manufacturers in China, Niel Machinery has top quality ribbon mixer for sale, which is sold worldwide and receives good comments from users. We are sure that our ribbon blender machine price is competitive among other manufacturers. Contact us to get a good price today!

The paddle agitator has the simplest structure. The blades are made of flat steel, welded or fixed on the hub with bolts. The number of blades is 2, 3 or 4. The blade forms can be divided into flat blade and folded blade. That is to say, according to the shape and characteristics of the blades, it can be divided into flat blade agitator and inclined blade agitator. The horizontal agitator produces radial force while the inclined agitator produces axial force. The paddle agitator is suitable for mixing low viscosity liquid, suspension and solution.

Application of paddle mixer machine

1. In the liquid-liquid system, the paddle mixer machineis used to prevent separation and make the tank temperature uniform. In the solid-liquid system, it is mainly used to prevent solid settlement.

2. Paddle type mixer is mainly used for fluid circulation. Because of the same displacement, the power consumption of the folded blade type is less than that of the flat blade type, and the operation cost is lower, so the axial flow blade is used more.

3. It can also be used to stir high viscosity fluid, promote the up and down exchange of fluid, replace the high price spiral belt impeller, and obtain good results.

Precautions for maintenance of paddle mixer machine

Regularly replenish lubricating oil for reducer and chain, grease for main shaft bearing and door opening bearing;

The chain should always be tightened slightly, otherwise, the loose chain is easy to cause jumping teeth, blade fighting, and other failures, resulting in unnecessary losses;

Check and supplement the lubricating oil in the oil mist eliminator of the pneumatic system regularly, and check the water collection in the air-water separator to ensure that the water level in the tank does not exceed 80%;

Check whether there is air (oil) leakage in the pneumatic pipeline and interface, if any, replace the air pipe or plug in the connector again;

Check the mixer rotor regularly and remove the sundries such as braided tape, nylon thread head, etc;

Check whether there is leakage at the shaft head of paddle agitator mixer frequently. If there is leakage, tighten the gland bolt slightly, and replace the packing after the packing is worn out. Check the four corners of the mixer door frequently for leakage. If there is leakage, adjust the support of the door arm and tighten the screws.

Niel Machinery is one of the leading powder mixing machine manufacturers in China. We supply a series of professional powder mixer machine. If you want to buy paddle mixer, please leave a message to us or contact us via sales@shniel.com.

Powder mixer machine   is a mechanical device that uniformly mixes two or more materials by mechanical force, gravity, and the like. In the process of mixing, it is also possible to increase the surface contact area of the material to promote the chemical reaction; it can also accelerate the physical change.

Types of machine mixer powder   Commonly used powder mixer machines are divided into gas and low viscosity liquid mixers, medium and high viscosity liquid and paste mixers, powder and granular solid materials mixing machinery.

The gas and low viscosity liquid mixer features a simple structure and no rotating parts, low maintenance and repair, and low energy consumption. This type of mixing machine is divided into four types: airflow mixing, pipe mixing, jet mixing and forced circulation mixing.

Horizontal powder mixer for medium and high viscosity liquids and pastes generally have strong shearing action.

Thermoplastic material mixing machinery is mainly used for mixing thermoplastic materials (such as rubber and plastic) with additives; powdered and granular solid material mixing machines are mostly intermittent operations, and also include machines that combine mixing and grinding, such as rim machines.

Mixer Parts of Powder Mixer Machine

Mixer parts are mainly made of wear-resistant alloy materials, including high-speed mixing scraper, mixing fin, wear-resistant lining, mixing arm, mixing shovel, planetary shovel, mixing coulter, stirring rod, mixing raft, etc.

How Does Powder Mixer Machine Work?

The moving parts of the mechanical agitator also shear the liquid when it is rotated. The liquid is also subjected to shearing action when flowing through the wall and various fixing members installed in the container. These shearing effects will cause many Local eddy current diffusion.

For liquids of different density, composition, and immiscibility, the shearing action caused by the agitation and the strong turbulence shred the dense liquid into small droplets and uniformly disperse it into the main liquid.

About NIEL MACHINERY 

As one of the most professional powder mixing machine manufacturers in China, Neil Machinery is committed to the design and development of various types of powder mixing equipment . In combination with customer requirements, Neil Machinery can design the most suitable mixer for customers. At present, the main powder mixers are: ribbon mixer, paddle Mixers, gravity-free mixers, pull-out mixers, various laboratory mixers, and lift hopper mixers, all made of 304 or 316 stainless steel, meeting food safety requirements. Neil Machinery can provide customers with One-stop powder process solutions save customers time and provides the best solution.

AD18 High Shear Lab Mixer

AD145S-P High Shear Lab Mixer

AD500S-H High Shear Lab Mixer

AE300L-H High Shear Lab Mixer

AE300L-P High Shear Lab Mixer

AE500S-H-50G High Shear Lab Mixer

AE500S-H-70G High Shear Lab Mixer

AE500S-H-90 High Shear Lab Mixer

AE500S-P-70G High Shear Lab Mixer

AE500S-P-90G High Shear Lab Mixer

R100 Mixer

We have digital-shear-mixer-emulsifier for sale, just contact us!

This a Overhead laboratory mixer stirrer with variable speed function, simple operation in a wider speed range, apply to a stable liquid stirring, especially for mixing a small volume of samples, petroleum, chemical, medical and it was specially designed for application in health, environmental, biochemical experiments , education and scientific research purpose.

Overhead Stirrer AM120Z-H

AM250W-T Overhead Stirrer

AM400W-H Overhead Stirrer

AD18 High Shear Lab Mixer

AD145S-P High Shear Lab Mixer

AD500S-H High Shear Lab Mixer

AE300L-H High Shear Lab Mixer

AE300L-P High Shear Lab Mixer

AE500S-H-50G High Shear Lab Mixer

AE500S-H-70G High Shear Lab Mixer

AE500S-H-90 High Shear Lab Mixer

AE500S-P-70G High Shear Lab Mixer

AE500S-P-90G High Shear Lab Mixer

R100 Mixer

AD18 Various Size Of Stirring Shaft

Stirring Shaft

Product Description of 56m Concrete Pump Zoomlion

ZLJ5440THBK 56X-6RZ

• Compact in design, the 56m pump mounted on the 4-axle truck, total weight is within the limit of the truckload.
• Efficient pump unit: consist of 2 Rexroth 180 main pumps, which generates 90 bar pressure on concrete with the smooth flow of 180m3/h.
• Agile placing boom with 6 arms gives a wide work range.
• The controller is designed for heavy-duty use, with a monitor, it monitors the concrete pumping equipment intelligently on working data management, real-time diagnostics, alarm logging, and service interval notice.
• Rich in configurations and high-quality components.

Technical Parameter of  Zoomlion 56m Concrete Pump

Concrete pump is a kind of concrete transportation tool that is commonly used in many construction units. It can greatly improve the efficiency of the project and shorten the construction period of the project. However, during the construction process, not many people understand the rules of operation of concrete pumps very well. Feeding is a very important part of it, and it should not be ignored.

So how do you feed the concrete zoomlion pump?

In the pumping process of the concrete pump, in order to ensure the smooth progress of the pumping, it must be carried out according to the factory operating instructions. As an important process in the construction, feeding is along with the entire pumping process of the project. How should the concrete pump be fed in the pumping? Specifically, the following rules can be followed:

In order to ensure the smooth progress of the project, usually in the process of pumping concrete, the concrete pump hopper should be provided with a separate screen, so as to avoid clogging at the inlet and outlet. At the same time, special personnel should be set to monitor the feeding during the whole feeding process, which can directly avoid the blockage caused by the excessively large aggregate or foreign matter entering.

Zoomlion 52 meters concrete pump, Isuzu chassis.

Manufacture Date is September of the year 2013.

Used condition and normal working. Equipment evaluation and Restorative maintenance.

Intelligent security, derived from Europe's mature bionic 6RZ boom system. The first configuration comes from the CIFA k-tronic intelligent security cloth technology pump. The key parts are the original components of international first-class brands, and the most rigorous and rigorous production process and testing process are adopted to ensure the high quality of each zoomlion concrete pump china.

Matters needing attention in the selection of concrete pump truck

The volume of the construction business

The quantity of used boom pumps can be calculated according to the quantity of commodity concrete pouring, the actual quantity of conveyance of the single machine and the time of construction. For those commercial concrete pumping construction projects with a large amount of one-time concrete, it is advisable to have a certain amount of reserve in addition to being determined according to the calculation. In addition, the commercial concrete business concrete station with the annual output of 10~ 150 thousand m3 shall be equipped with 2~3 commodity concrete gantry pump trucks.

Product configuration

In the selection of product performance of concrete arm used pump trucks, the high starting point should be adhered to. If high-value concrete upper arm pump truck is selected, the standard of its products must be improved. The quality of the main components of the product, both internal quality and external quality, should be adapted to the high value of the whole vehicle.

Power system

Concrete frame pump truck adopts the full hydraulic technology. So it is necessary to consider whether the hydraulic technology used is advanced or not, and how the quality of hydraulic components. Because its power comes from the engine, so besides engine performance and quality, the performance of automobile chassis, bearing capacity and quality should also be considered.

The operating system

The operation control system of commodity concrete arm pump is provided with manual, wired and wireless control modes. Wired control is convenient and flexible, wireless remote control can be operated remotely. Once the circuit fails, the manual operation mode can be adopted.

After-sales service

As a special vehicle, the concrete arm pump truck should be required for its safety, mechanical performance, after-sale service, and parts supply. Otherwise, once the accident occurs, it not only affects the construction schedule but also will produce the unimaginable consequence.

Our own number: 557

Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.

Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.

Comprehensive maintenance, direct to the construction site.

Overview of used sany concrete pump:

Five-section RZ arm frame, the fabric is flexible.

X-shape outrigger, single side support, suitable for narrow site construction.

The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.

Computer energy saving control, automatic power matching, the average energy saving is 20%.

The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.

The new control system is free to upgrade automatically.

The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.

Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.

Safety precautions of Used Sany 46 Meters Concrete Pump

1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.
2. the Sany concrete pumptruck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.
3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.
4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.
5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.
6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.
7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.
8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.

sany concrete pumps for sale, RFQ today!

Product description of Used Putzmeister Concrete Pump 738:

1. Putzmeister 36 meter concrete pump, UD chassis (belongs to Nissan, 3 axle x-leg, 4 booms, high working stability.
2. The manufacture Date is August of the year 2007.
3. Working condition and regular work. Equipment evaluation and maintenance.
4. Remanufacturing will be carried out to ensure that every product is in good condition and that there must be no faults to the product when leaving the factory so as to reduce the working pressure and cost of customers.

A putzmeister used concrete pumps is a machine which uses the pressure to transfer the concrete continuously along the pipeline. It is composed of pump body and conveying pipe. According to the structure form, it is divided into piston type, squeeze type and hydraulic diaphragm type. The pump body is mounted on the chassis. Equipped with retractable or folded placing booms, the pump truck is constituted.

The used Putzmeister pumps are modified on the chassis of the truck. It is installed on the chassis with power transmission device, pumping and mixing device, placing the device and other auxiliary devices. The power of the engine is transferred to the hydraulic pump unit or rear axle through the power box, and the hydraulic pump pushes the piston to drive the concrete pump. Then, the concrete can be transported to a certain height and distance by placing booms and pipe.

We have used putzmeister pumps for sale, RFQ today!

It is a common fact that we find a wide variety of concrete machines on every construction sites, which make the construction jobs easy, safe and quick. Used concrete equipment has the characteristics of high cost performance. Low risk, low investment cost, high returns. Engineers have a strict review mechanism for the source and control of the used concrete line pumps truck, inspecting more than 500 items and filling in the first inspection list. Used pump truck that meets the Teila review standard can be repaired in the factory. Ensure zero failure before it leaving the factory and can work directly. Used concrete boom pumps have the characteristics of low risk, small investment cost, and high returns.

used concrete line pumps for sale! RFQ

Advanced and exquisite maintenance and remanufacture technology. Maintenance and remanufacture technology leads the industry. Teila Remanufacture has introduced the industry-leading standard system of "one, two, three, four and five level", strictly in accordance with standard procedures for maintenance and inspection, implementing the process operation, standardizing the management, to ensure customers feel comfortable to purchase and use. What is re-manufacturing? Re-manufacturing is guided by the product life cycle theory, and in order to achieve the goal of improving the performance of waste products, in accordance with the principles of high quality and high efficient, energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the refurbished pumps (remanufactured) and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Construction equipment re-manufacturing is not a simple repair, we can think the re-manufacturing as the highest stage of the repairing. The common repair is where it breaks, we fix it. But the re-manufacturing is a serial activity of repairing with the high technology and industrialized production. Frankly speaking, Teila dismantles the pump and then according to the standard of re-manufacturing, repairs, assembles and debugs it.

Refurbished Concrete Pumps (remanufactured) products:

What is refurbishing? Refurbishing is guided by the product whole life cycle theory, and in order to realize the waste product performance improvement as the goal, with the rule of high quality and high efficient ,energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the equipment and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Concrete pump refurbishing is not a simple repair, we can think the refurbishing as the highest stage of the repairing. The common repair is where is broken, repair it. But the refurbishing is a serial activity of repairing with the high technology and industrialized production. Teila dismantles the concrete pump and then repair, assemble and debug it according to the standard of refurbishing.

We have concrete boom pump for sale, RFQ today!

1. Putzmeister 42 meters concrete pump, Volvo chassis, 4 axle x-leg, classical 4 booms, high working stability.
2. Manufacture Date is November of the year 2005.
3. Maintenance completed new tires of the complete machine. Hopper maintenance; Finishing lubrication pipeline, circuit, and hydraulic circuit. Whole line arrangement, old pipe and line changed, pressure debugging for 8 hrs and in very excellent condition.
4. Import quality, trustworthy. No formalities and higher cost performance.
5. The first class of machine and make sure each of everything is in good condition, must zero fault when leaving the factory, reduce working pressure and cost from clients.

Only with the stable lower plate is the pump truck safe. The arm-frame pump truck supporting leg should be paid much attention.

Just like kung fu, if your "lower plate" is not strong enough, you can easily be pushed down. Whether putzmeister second hand pump trucks' legs can firmly "plunge" on the ground, is the priority of the safe operation of the arm gantry pump truck.

1. Protect yourself and others from dangerous areas

When opening or closing the leg of the gantry Putzmeister stationary concrete pump, the rotation range is a dangerous area. People may be hurt in the range. When carrying out this operation, you should be careful of yourself and the people nearby.

2. To strengthen of the overlapping location is great. The supporting legs should be extended in place.

The legs of the arm pump truck all have fixed strengthening positions. Only when the legs are opened and extended in place can these strengthening positions give full play to the strength. Otherwise, the supporting legs will be in danger of breaking. Pay attention to the arrows on the legs and ears as you extend them.

3. Communicate with construction personnel in advance and don't "step on empty"

The gantry pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area. In addition, communicate with the person familiar with the construction site before supporting the leg, and make sure the leg is not above the sewer.

4. Keep a safe distance to prevent ground collapse

Adequate safety distance should be set aside to prevent ground collapse when support is near a pit or ramp.

5. The arm pump truck must be leveled and must not exceed 3 degrees

After the support is completed, make sure that the maximum horizontal deflection of the gantry Putzmeister truck mounted concrete pump is no more than 3 degrees. Generally speaking, the direction of the extension of the arm frame will be raised higher during the construction process, leaving a surplus for the subsidence after the extension of the arm frame. Currently, the arm mounted pump truck is usually equipped with an electronic level and alarm device. Once the arm mounted pump truck tilts too high, the alarm will sound to remind the operator. Before extending the armrest, make sure the legs are properly attached.

6. Remote control ensures the safety. Do not be too high from the ground

Upon confirmation of all the leg under the condition of reliable and efficient, make confirmation on the leg safety with the first and second boom. The specific approach is to stretch one arm frame, making the open Angle at 90 degrees. Then let two booms in one meter off the ground. Move one arm up and down in the position of four legs, check whether the corresponding arm bracket and diagonal arm bracket are safe.

7. If water enters under the leg, the arm shall be returned for safety

In case of the occurrence of rain water, oil cylinder leakage of supporting legs and factors reducing the stability of supporting legs, the arm shelf should be closed immediately. After the problem is eliminated, the supporting legs should be put up again according to the requirements.

In addition, when supporting the arm pump truck, it is better to keep the tire off the ground by 5 cm or so. Otherwise, the swing of the s swing tube of the arm pump vehicle and the shaking of the vehicle caused by the impact of pressure in the tube will damage the vehicle driving mechanism.

Concrete mixer pump truck is a special truck used to transport concrete used in construction, Because of its appearance, it is often called the field screw truck, olive truck. These trucks are equipped with cylindrical agitators to carry the mixed concrete. During the transportation, the stirring tube will always rotate to ensure that the concrete carried will not solidify. After delivering the concrete, water is usually used to wash the inside of the mixer to prevent residual concrete from hardening and taking up space, so that the mixing tube volume is less and less.

The cement mixer lorry is composed of automobile chassis and special equipment for concrete mixing transportation. The chassis of the concrete mixing truck produced in our country mostly adopts the second kind universal chassis provided by the whole truck manufacturer. Its special mechanism mainly includes mixing drum, drive system, water service, full power force extractor, support for front and rear agitator tube, reducer, hydraulic transmission system, input and output materials system, control mechanism and cleaning system. It works by taking the power out of the chassis through a force extractor, and drive the hydraulic system variable pump, convert mechanical energy into hydraulic energy for transmission to the quantitative motor, the motor drives the reducer again, the concrete mixer truck is driven by a reducer, mix the concrete.

Concrete cement mixer lorry for sale is a device that homogeneously combines cement, aggregate such as sand or gravel, and water to form concrete. A typical concrete mixer uses a revolving drum to mix the components. For smaller volume works, portable concrete mixers are often used so that the concrete can be made at the construction site, giving the workers ample time to use the concrete before it hardens. An alternative to a machine is mixing concrete by hand. This is usually done in a wheelbarrow; however, several companies have recently begun to sell modified tarps for this purpose.

Since establishment, Teila is all along dedicated to concrete machinery. Our main products include concrete truck mounted pumps, concrete boom pumps, line pumps, trailer pumps, concrete mixing trucks & plants, etc. There are top global well-known brands including Sany, Zoomlion, Putzmeister, Schwing and so on. Each collection contains New, Used, Refurbished(remanufactured) machines, and spare parts.

Therefore Teila target clients are very specific. They commonly need the machines used for the transportation of concrete in the building of urban area, sports venues, residential area, overpass, railway, airport, etc. As long as there is demand for these 4 classes of products, Teila can fulfill the desires of clients from any dimension. From maintenance cost, quality standard, service effectivity integrated into a whole value chain based on purchaser requirements.

The structure and characteristics of Teila products are summarized as follows:

Firstly, All the concrete machines are goods in stock. Teila is a supplier as well as a factory, we have maintenance & remanufacture workshop and super remanufacture engineer team in Xiangtan, Hunan, China.

Secondly, For the used concrete machine, engineers have a strict review mechanism for the supply and manipulate of the concrete machine, checking over 500 items and fill in the first inspection list. Equipment that meets to Teila evaluate standard can enter the factory to be maintained. We ensure there is zero failure in the machine before it leaves the factory. Our Equipment features low risk, small investment, and fruitful returns.

Thirdly, For the refurbished(remanufactured) concrete equipment, we have superior and exquisite remanufacture technology. Our Maintenance and remanufacture technology is in a leading position of concrete machine industry. Teila Remanufacture team has added the industry-leading standard system of "one, two, three, four and five level". Strict maintenance and inspection in accordance to standardize procedures, Implement the system operation, standardize management, ensure customers are convenient to use.

Fourthly, from purchase to shipping one-stop offerings and there is no worry from cost to after-sale service.

With the rise of modern industry, the construction method of concrete as the main material has become one of the main constructions in the construction industry, It takes up a large proportion in all kinds of engineering construction, this makes the development of concrete machinery durable, and there is a growing situation. Used concrete trailer pumps referred to as "trailer pumps", it is one of the various concrete machines, used for conveying and pouring in concrete construction.

Trailer Pump Products:

Generally, a concrete delivery pump has the following main technical parameters: delivery capacity, outlet pressure, power, and distribution valve form. In terms of power type, used concrete trailer is generally divided into diesel trailer pumps and motor trailer pumps. In terms of hopper allocation, trailer pumps are generally divided into S valve, Ram valve, C valve.

Classification selection 37kW (domestic minimum standard concrete pump, under 37kW is fine stone mortar pump), 45kW, 55kW, 75kW, 90kW, 110kW, 130kW (diesel), 132 kW, 162kW (diesel), 174kW (diesel)......

Trailer pump is manufactured by electric, diesel and ultra-high pressure for your use on sites. The trailer Mounted Pumps prove their worth and superior performance in various applications, e.g. operate well at -22°C in Moscow, 55°C in Dubai, 12h continuous pumping and pump of difficult concrete like B90, C150, and 3-gradation concrete. 5 core pump technologies provide you with the best trailer pump. Trailer pump has high pumping efficiency, long service life, simple operation, efficient energy saving, cutting-edge technology, trustworthy!

trailer pump for sale! RFQ today!

Remanufacturing is the process of revitalizing old machinery and equipment. It takes old machine equipment as blank, adopts special craft and technology, a new manufacture is carried out on the basis of the original manufacturer, and the remanufactured products are as good as the original ones in both performance and quality.

Scientifically speaking, remanufacturing is an industry that carries out high technology repair and transformation on waste products, and it targets the parts that are damaged or will be scrapped, based on the analysis of performance failure and life evaluation, the design of remanufacturing engineering is carried out, adopt a series of related advanced manufacturing technology to make the quality of remanufactured cement concrete mixer truck meet or exceed the old cement mixer for sale.

The process of remanufacturing the mixer truck used of Hunan Teila Heavy Industry Machinery Service Co., Ltd is below: Check and maintain the engine properly, gearbox maintenance ensure there is no noise when putting into gear. Maintenance inspection for the middle and rear axle. Reducer inspection and maintenance and checking no oil leakage point on the main oil pump. Check clutch, main pump, booster pump, clutch plate, and braking system thoroughly. Inspection for brake master cylinder, brake cylinder, brake pad. Clean up the oil lines and diesel tank to replace the filter. Light check and line arrangement make sure all the lights are on. Air pressure and air circuit system check to ensure no air leakage. Air conditioner maintenance. Internal appearance trimming, the cement of mixer tank is cleaned. Inlet and outlet, Herringbone slot, stairs on both sides repair welding. Roller track bearing inspection without abnormal noise. Control rod wiredrawing replacement repair. The vehicle tire, changing the vehicle and beat the butter and cab beauty.

A wrecker truck (also called a tow, a breakdown truck, recovery vehicle or a breakdown lorry) is a truck used to move disabled, improperly parked, impounded, or otherwise indisposed motor vehicles. The heavy duty tow truck uses Sinotruck chassis. Sinotruck is a famous brand in China which has a long history. It is very advantageous in heavy loading vehicles. The chassis is superior in power, economical and comfort achieved international standards. Security, reliability, and intelligence are all very good. And, it has a variety of personalized configurations to choose from which can meet the various needs of customers. It uses heavy-duty engine, horsepower reached 336. The emission standard is Euro 2. The drive format is 6X4, a total of 10 tires plus a spare tire. 

What's more, it uses mini- way valve and balance valve which are imported from Italy. It protects the safety of the vehicle at work. Also, Hydraulic cylinders and hydraulic connectors adopt German technology which keep high efficient when lifting. About seal, it was all imported which protect safety. And the new non-slip flat plate is stamped with a die and never deformed. It increased vigilance and make vehicles safer when performing obstacle clearing
We are a large manufacturer and can produce trucks according to your orders. Not only sinotruck, we also have many brand is optional. (Dongfeng/Faw/ISUZU etc). We heavy duty wrecker manufacturers can produce according to your order. Just choose us!

The specification of Sinotruk 20 Tons Heavy Duty Tow Truck