Blogs/News/PSAs

Specifications

Most details shown below can be customized,for example:dress length,train length,neckline,straps,sash,beading pattern,etc.

Silhouette            A Line

Fabric                Lace

Neckline              Sweetheart,Round Neck

Sleeve                Three Quarter Sleeves

Back Style            Sheer Tulle Back

Hemline/Train         Sweep Train

Shown Color           Champagne

If you are looking for Cheap Embroidery Lace Wedding Dress, just contact us!

At present, pvc membrane welding machine has been widely promoted in a number of plastic welding industry. Various welding defects are inevitable in the process of use. In this article, it mainly analyzes how to solve the problems in debugging or welding.

1.Crush and bruise

Pressing injury and abrasion are common problems in the process of pvc membrane machine. Sometimes it's not so serious, and it just gets white or marks. When you encounter such problems, the first thing to do is to ensure that the location of the tooling is not out of alignment. First let off the air of the cylinder, press down the welding head, and carefully observe whether the welding head position of the scratch is correct. If the welding head is in the correct position, or if the abrasion or compression occurs on the support (or lower cover), then it is necessary to observe whether there is any interference between the tooling and the product. If it is old tooling, it is suggested to clean the tooling with alcohol at this time. If it is a new fixture, lightly rub the scratch (especially at the bottom of the step) with sandpaper to prevent burrs. In addition, observe whether the air pressure of the cylinder is too large during welding, whether the film of the pad has not been changed for a long time during welding, or whether there are foreign bodies stuck on the film.

If the above work is done, the pressing injury still exists, it can be basically judged as the interference of tooling. At this time, the mold shall be modified according to the size and location of the pressing injury:

(1)slight pressing injury. File the sharp Angle of the tool at the corresponding place of the tool, blunt the sharp Angle of the tool, and then use sandpaper polishing;

(2)the pressing injury is serious, but there is no welding rib at the corresponding place. Rub off the interference part of the fixture with an air abrasive rod (be careful not to touch other parts, especially the root part of the air abrasive rod, which may be rubbed off other places without being noticed). After grinding, make it smooth with whetstone and buff with sandpaper;

(3)severe crush injury. If there is welding rib in the corresponding place, or if there is serious pressing injury and the interference part is very large, please consult with the designer. Have the processing center dealing with the modified drawing and contact the relevant personnel to confirm whether there is a problem with the injection molding, or whether to improve the product structure.

2.Material overflow

If there is any overflow in the welding process of pvc membrane welding machine, do not debug or modify the welding parameters right away. First measure the size after welding, and compare it with the normal value. Adjust according to the difference.

3.Insufficient welding strength

If it is old tooling, first stick the product on the welding head, observe whether the gap between the product and the welding head is too large in the weak welding place, to determine whether the welding head is worn; if it is a new tool, please scan it with the welding head, observe its frequency, power and curve, and make sure there is no problem with the welding head.

As one of the most professional high frequency welding machine manufacturers in China, Liaoning Yufei High-Frequency Equipment Co., Ltd. is a renowned Chinese company specializing in high frequency welding equipment. Please feel free to contact us if you have any further inquiry.

Milk tank truck, also known as transportation truck, is used for transport the fresh milk and other liquid medium etc. Besides, the milk tanker truck is equipped food type 304-2B stainless material. The vent valve is set at the top of the pot to enable automatic adjustment to reduce evaporation loss of the liquid and to prevent deformation of the liquid filling body when positive and negative pressure is generated in the tank. An electrostatic grounding plate may be provided according to the needs of the transportation medium. Add fireproof cover to prevent accidental traffic accidents due to static electricity and Mars; the amount of residual liquid in the tank is small, which meets the requirement of less than 1% of the national standard; more optional components; optional flow meter, level gauge, safety lock Device, anti-spill device, etc. We have quality milk tank trailers for sale.

Fresh milk transporter conversion configuration: The tank structure is divided into insulation layer protection layer, insulation layer and tank three layers.

First, the body of the frame can be made of food-grade 304 stainless steel. The tank can be made into 2-3 compartments. The tank's internal gallbladder requires smoothness and no sharp corners. Each milk tank is provided with a washer inside a cip (cleaning device) tank.

Second, the middle of the tank is a thermal insulation layer, which has a thermal insulation effect to prevent the fresh milk from deteriorating. The 30-degree temperature difference does not exceed 1 degree in 24 hours. Insulation material is 80 (mm) thick polyurethane foam insulation.

Third, the outer layer of the can (insulation layer protection layer) uses 2mm 304L stainless steel plate. The outer skin and trunk of the stainless steel are beautifully shaped. The whole body is beautiful in appearance, scientific in structure, light in weight and good in strength.

Fourth, there is a separate discharge port (self-flow port) and feed port (tank port) in each single-chamber.

Fifth, optional refrigerator, rock wool insulation, exhaust gas circulation heating, install stainless steel pump, so that the vehicle has a suction function.

The Advantage of 3 Axles 40 CBM Milk Tank Trailer

1. Large volume with 40 CBM tank.
2. Lower price with mature production technology
3. Good material with food type 304-2B stainless.
4. Insulation function: within 24 hours medium temperature elevating is less than 1 ℃。
5. Equipped with CIP (cleaning device) to keep tank cleanly.
6. Separated tanks make milk transport more efficient

The specific parameter of 3 Axles 40 CBM Milk Tank Trailer

Recently, the "LED Display Film Broadcasting System Joint Laboratory” organized by AOTO and China Research Institute of Film Science & Technology has been officially established at AOTO headquarter, and it has been highly supported by Shenzhen Culture, Radio, Television, Tourism &Sports Bureau and Propaganda Department of Nanshan District Committee. The objective of this joint laboratory is to build the technical standard of “Chinese LED Film Broadcasting System”, and obtain the permission of digital film source worldwide through the international certification. What is more, it is also expected to help strengthen the voice of Chinese products in International Film Broadcasting System and enhance the competitiveness.

In these years, Chinese film market has been witnessed a breakthrough. In 2018, the box office receipts of China exceeded 60 billion and its cinema LED displays also over 60,000 pieces, occupying the first place in the world. However, the national film broadcasting equipment enormously depends on imports business, and the screen visual effect has not kept up with the audience's potential demand for 4K ultra-high definition and 3D high-quality film viewing experience. Based on this situation, It is an inevitable trend to apply high-definition technology of LED displays to film projection.

Compared with the traditional DLP digital film projection equipment, the large LED display has the obvious advantages as it achieves an improved performance in HDR image technology, high contrast, ultra-high brightness, wide gamut, high frame rate, and color precision, etc. It can bring more powerful and high-quality images and create an immersive viewing experience.

As the subordinate units of the Central Propaganda Department, China Research Institute of Film Science & Technology is the only national-level scientific research institute in the domestic film industry, as well as the unit of Chinese Film Industry Standard Management and ISO TC36. It is professional and experienced in film R&D, promotion and standard setting, etc.

With over 20 years LED displays R&D experience, AOTO is at the top level in LED displays and processing technology. The newly developed mass-produced MINI LED display products have global intellectual property rights. It can provide delicate and realistic large-scale display images with the exclusive 4K and 8K ultra-high definition video control systems.

This cooperation can be described as a strong alliance, which not only conforms to the trend of current film technology development, but also promote the development of national brand LED screen film projection system. AOTO cld will firmly insist on innovation and contribute to this potential market.

AOTO Electronics Co., Ltd. ("AOTO") is a high-end led manufacturer registered in Shenzhen, China. We are devoted in producing digital display board. We sincerely invite and welcome people from all around the world to invest and create more values together.

We have rammer compactor for sale!

Tamping rammer well known as jumping jack in western countries, it makes up of an engine (motor), a small foot (plate). The jumping jack type is mainly used to compact the backfill in narrow trenches for water or gas supply pipes etc and repair pavements and roads in the small area where the plate compactor and roller compactor are not available to enter into. Rammers have the ability to compact a deeper amount of soil than a plate compactor because the force from the plate is more direct.

The torque generated by the engine or electric motor is transferred to reciprocating motion by crank gear, which will pass it on vibrating foot (shoe) through spring cylinder. It has a strong impact force though it is small and light.

Proper Compaction is very important to prevent soil settlement from happening and result in expensive maintenance cost or structural failure. The soil has complex mixtures. It is consisting of minerals, water, air, organic matter while forming on the land’s surfaces. It is always obviously essential step to do soil compaction as part of the building process in advance. Soil compaction is one of the easiest methods of mechanically increasing the density of soil ground.

It is very similar for upright rammer   and plate compactors. In spite of the fact that the structure is different, the working principle and function same. So when should we choose tamping rammer instead of plate compactor? It is easy to recognize on the accordance of the type of soil. The Tamping rammers work obviously great when compacting cohesive soils because of the small size of the plate. The smaller plate size allows for more focused and direct compaction, which comes in handy on soils that require more force to properly compact. More an can be added to each layer which can make the process of filling and compacting a hole or trench, much faster.

BYCON is one of the most professional tamping rammer manufacturers in China.Please feel free to contact us if you have any further inquiry.

Features of JH-238 Pocket Body Worn Hearing Aid  Hearing Amplifier

1. Big size body, exquisite design, obvious button, easy operation, could be used by everyone;
2. Pocket body aid hearing aid, can be easily wear in the belts, trouser pockets and so on, so that user can carry it to everywhere, is very stable;
3. Corresponding uncomfortable threshold properly adjust the maximum output, protect ear;
4. Contacting with a 2 pins ear line earphone, just like you listen a MP3 or others;
5. High power hearing amplifier with AA battery, which has a long using time, and the battery is easy to purchase;
6. 1-9 volume control, high output, high frequency, suitable for moderate and severe hearing loss
7. Frequency adjustment function,  "I" is ON switch, "0"is OFF switch. "H1", high frequency, can help you reduce low frequency noise, "H2", more high frequency, can help you reduce low frequency noise than h1

Package Included

1 Pocket hearing Amplifier

3 Ear tips

1 Strong box

1 Manual book

1 Volume Sticker

1 AA battery

1 PCS 2 pins ear line

Precautions of JH-238 Pocket Body Worn Hearing Aid  Hearing Amplifier

1.Open the cartridge cover, put the battery in correct direction.

2.Before using switch off volume or turn to the minimum position .

3.Chose the right size ear tips, connect the ear tips with hearing machine, wear in ear.

4.Turn on the power ,and adjust the sound volume to get clear sound.

5.If you hear the whistling sound ,please check whether you have plugged in the ear plug tightly. If it can't be plugged tightly, please change the other size.

6.Turn the switch off if not using

Huizhou Jinghao Medical Technology CO., LTD. is the sole listed lidl hearing aids manufacturer in China. If you want to know more details or want a quotation, just feel free to contact us!

Crane M2 is the world's most flexible handheld gimbal designed to fit any lightweight camera system. Silky-smooth footage has never been easier just snap in your camera balance and start shooting so you can turn those shaky shots into Crane M2. It supports a wide range of smartphones, action cameras, and compact cameras. Crane M2 is compact so you can stay lightweight and with its new positioning locks on the rolling access, you'll never waste another minute rebalancing on the setup with its creative shooting modes. You can go solo with selfie mode just three quick taps and you're ready to start sharing your own show with the world. The Crane M2 with loads of gear gain remote control of the gimbal through Wi-Fi and Bluetooth so you can frame your shots without any hassle over cables or adapters and with its intuitive OLED display you have all the info you need right in front of you like a cinema camera in the palm of your hand Crane M2 gives you the power of professional filmmaking with one simple device so say goodbye to shaky footage and say hello to a new era of content creation built for everyone.

Zhiyun Crane-M2 is the most compact and versatile gimbal compatible with multiple-devices. We would show 5 unique things of Crane-M2 in the following article. The first thing is the ultimate versatility. Crane M2 makes it such a unique and revolutionary product the crazy thing about this gimbal is you can through so many different devices on it from action cameras.

If you are interested in Crane M2, welcome to www.zhiyun-tech.com .

Overview

Cleanroom HPL door is made of HPL material, which is made up of aluminum door frame or steel door frame. The door plate is made up of double-layer HPL plate and sandwich material. It has a good appearance and together with the featyres of HPL boards, corrosion resistance, high-temperature resistance and so on. Clean room HPL door is commonly used in pharmaceutical factories, food factories, chemical factories and etc.
The Advantages of Clean room HPL door
Production Advantages:
1.Good flatness;
2.Corrosion resistance;
3.High strength;
4.Easy to installation;
5.Fire proof.
Our Advantages:
1.HPL doors are suitable for places where need cleanliness requirements purification like workshops, hospitals, pharmaceutical factories, food factories and etc. The door body mold is integrally formed without gaps and corrosion resistance. The power beam is made of aluminum alloy and the transmission structure is reasonable and reliable. The life span is over 1 million times. The overall performance of the product is good, and it has the advantages of beautiful appearance, flatness, high strength, corrosion resistance, no dust accumulation, no dusting, easy cleaning and etc. And the installation is convenient and fast. The door frame of the utility model has adjustable width and good sealing performance.
2.We have been engaged in the clean room industry, we invested a lot of manpower and financial resources in the research and development of products, and hope to make the clean room better in order to meet or exceed the user's requirements.
The Application of Clean room HPL door
Application: Pharmaceutical, Food, Chemical and etc.
Other Notes of Clean room HPL door:
1.Payment : T/T, L/C.
2.Transportation : Shipping, Air Freight.
3.Packaging : Carton, Wooden Box.

SAND PAPER ROLLS

Are you looking for bulk sandpaper rolls?

Application:

Riken RMC CP57 adopting specially treated silicon-carbon grain, the specially treated coating can prevent the static efficiently, with high sanding efficiency, good heat-resistant and super sanding performance. It is widely used in furniture, wood floor, stone, marble, and metal. High-quality EWT backing paper, high tough and flexible, can be converted to different size rolls, different size belt, Velcro disc and so on. Special treated FEPA standard Silicon carbide abrasive grain, with higher performance, long grinding life, and excellent polishing surface. The antistatic paper backing reduces clogging problems and improves the lifetime of the product. It also contributes to cleaner surfaces when you are sanding wood, stone, marble, and lacquer.

Specifications:

As a professional abrasives company in China, ZIBO RIKEN has become many well-known international companies’long-term partners. We believe that achievement in Safety, Health and Environmental performance is a mindset, which begins daily and to be carried out through everything we do. Welcome to contact us for cheap Abrasives.

Diamond is a mineral made of pure carbon and the hardest substance in the natural world. It can not only be processed into valuable jewelry but also has great potential in the industry. It features high thermal stability, high chemical stability, good electrical conductivity and good physical properties (excellent compressive strength, good heat dissipation, high anti-corrosive ability, low rate of heat expansion etc). It has high hardness and good abrasion resistance and can be widely used in cutting, grinding and drilling. Due to its high thermal conductivity and good electrical insulation, it can be used as a heat sink for semiconductor devices, it has excellent light transmission and corrosion resistance. It is also widely used in the electronics industry.

Nowadays Diamond becomes the most important industrial material and widely used in metallurgy, petroleum drilling, construction, mechanical processing, electronic industry, and aerospace industry.

Approximately 90% of diamonds used in various industries are manufactured synthetically.

Equipped with the advanced producing and testing machines and with more than 40 years experience, E-Grind provides all types of Synthetic Diamond powder with premium quality and competitive price. E-Grind is one of the most professional synthetic diamond manufacturers      in China.

EGrind Abrasives is professional in diamond and CBN products with over 50 years experience. We sincerely invite and welcome people from all around the world to invest and create more values together.

How to remove rtv?

For clothing stained with this RTV silicone, the silicone should be moistened with turpentine to soften it, and then removed with gasoline. For already dry spots, apply cream or artificial butter first, then wipe with gasoline or turpentine, then wipe with 10% ammonia until all the silicone are cleaned. You can also use turpentine to wet the silicone or apply a mixture of white porcelain clay and turpentine to the silicone. After 4 to 5 hours, the RTV silicone can be wiped off and washed with hot soapy water. In addition, the solvent chloroform, turpentine and a mixture of chloroform and carbon tetrachloride (1;1), and a mixture of diethyl ether and ethyl acetate (1;1) are  very effective in removing oil base and dry oil spot.

Such stains on the dyed fabric are first wetted with a pure hot glycerin solution, and then pressed with a cotton ball which touches glycerin tightly on the stain (no rubbing is allowed, rubbing causes changes in the color around the stain).

For such stains on white clothing and non-fading clothing, use concentrated alcohol or concentrated alcohol and a mixture of 5% ammonia in water. When a colored wash stain remains on it, it should be treated with a 3% sodium dithionite solution. When the garment is white cotton and linen, it needs to be removed with an aqueous solution of bleaching powder or an aqueous solution of a mixture of bleaching powder and washing soda ash.

For such stains  on white clothing and non-fading clothing, use concentrated alcohol or concentrated alcohol and a mixture of 5% ammonia in water.  you should use 3% concentration of sodium dithionite solution to deal with when the dress is white cotton and linen, using aqueous solution of bleach or aqueous solution of bleach and washing soda ash mixture of removal.

GOLOHO POLYMER was founded in China, setting up factory to develop and produce rtv grease. Now the company embraces united and dynamic team, experienced R&D center, advanced detection method, strong manufacture capacity as well as customer-oriented service. We sincerely invite and welcome people from all around the world to invest and create more values together.

Are you looking for custom thermoforming?

HLP Packaging manufactures stand-alone thermoformed packaging, like blisters and clamshell packaging, as well as  vacuum formed inserts to be used as inserts in clear plastic boxes and Klearfold Keepers. Clear vac-trays within clear boxes position the package contents securely, create exciting aesthetics and the illusion of contents floating within the clear box.

HLP Klearfold is the world's largest producer of packaging products inc. We are committed to providing the highest standards of customer service. And We sincerely invite and welcome people from all around the world to invest and create more values together.

The auto manipulator can implement gripping and transporting functions by programmable program. With high position accuracy, fast pick-and-place speed and stable process, Yiheda has many series of manipulators such as single-axis linear slide module, pneumatic traverse manipulator, pneumatic traverse rotary manipulator, cam 90-degree rotation manipulator, cam high-speed transfer manipulator, cam route-adjustable manipulator, etc., by utilizing these manipulators to complete the material transportation, horizontal rotation, 90 degrees of movement and other actions, which are easy integration, easy installation, low cost, fast pace and low failure, etc.

Transverse manipulator

The transverse manipulator is driven by cylinder, and the route can be adjusted. The traditional and precise structure is cost-effective, which can complete the clamping and assembly during the process. ​

Turntable linkage high-speed manipulator

Driven by two sets of servo motor and screw rod, the manipulator can move in X-axis and Z-axis direction. One X-axis action plus two z-axis actions are a cycle, the cycle time is 1.2s, which guarantee the speed, stability and accuracy of the manipulator, and can replace the traditional pneumatic manipulator.

90 Degree Transfer PPU

With cam structure, the manipulator can complete horizontal and rotary movement via controlling the cam track curve. Driven by swing cylinder, it can achieve high-speed and high accuracy action, the cycle time≥0.6s.

U-type high-speed transfer PPU

With cam structure, the manipulator can complete horizontal and rotary movement via controlling the cam track curve. It can stop at any position within the range of its route via the combination of the stepping motor and the cam system, and the positioning accuracy is 0.02mm.

Adjustable transfer PPU

With cam structure, driven by external control system and rotary cylinder, the manipulator runs according to the scheduled track, which makes the X-axis can be adjusted, widen the route of pickup material and the range of application.

Transverse manipulator

The transverse and rotary manipulator completes the cyclic movement between the four stations under the drive of the cylinder to achieve fast feeding, which can replace the traditional manipulator. It is suitable for precise and stable assembly and feeding.

Transverse manipulator (with-multiple-grippers)

The transverse manipulator is driven by cylinder, which can be installed with multiple actuators. It is suitable for the detection, assembly and transportation of multiple station.

Dongguan Yiheda Automation Co.,Ltd, established in 2010, is an expert custom automation company, specializes in designing and manufacturing the custom automation solution to customers. If you are looking for automatic production machines, just contact us!

9-Fmoc-Aminoxanthen-3-yloxy-polystyrene resin

A hyper acid-labile linker or the Fmoc SPPS of protected amides via mild 1% TFA cleavage. The sieber amide resin can be readily reductively alkylated to provide a support suited to the synthesis of secondary carboxamides. This resin has also been employed to produce protected peptide fragments in wich the C-terminal carboxylic acid group is blocked as a hydroxymethylphenoxy-β-alaninamide ester.

SIZING SOLUTION RECOVERY

Printing and dyeing sizing wastewater alkali reuse technology patent is the use of ceramic ultrafiltration membrane technology to concentrate sizing wastewater, which permeates directly backs to the sizing process, water and caustic soda are reused fully after treatment resulting in zero discharge. The technology has achieved industrial scale applications and access to a national invention patent.

1. Dyeing and sizing wastewater contains a large amount of refractory slurry, the slurry into the sewage treatment system, increasing the difficulty of biochemical treatment, making sewage treatment costs increase. Printing and dyeing sizing wastewater also contains a higher concentration of caustic soda (0.5% ~ 7%) and a certain amount of refining agent, with a high recovery value.

2. Using uf membrane technology, the printing and dyeing sizing wastewater concentration treatment, membrane treatment of the permeate directly to the sizing process, including water and caustic soda, etc. can be completely reused to achieve zero discharge of sewage treatment.

Refined water from a dying plant in Nantong is treated by ceramic membrane technology, project design daily capacity is 500m3 or more, yield meets the workshop reuse requirements.

INDIGO RECOVERY

The dye wastewater containing indigo is characterized by a dark blue color due to the presence of the dye not fixed to the fiber during the dyeing process.

The primary use for indigo is as a dye for cotton yarn, which is mainly for the production of denim cloth for blue jeans.

The wastewater containing indigo is characterized by a moderate amount of chemical oxygen demand (COD), pH, suspended solids, dissolved solids and a dark blue color, due to the presence of the dye not fixed to the fiber during the dyeing process.

JIUWU HI-TECH utilizes the unique integrated membrane systems for dye wastewater treatment, which recover the insoluble indigo dye, the production of a secondary commercial product from the waste stream through a by-product synergy process offers an attractive alternative to discharging the untreated effluent into municipal treatment plants or the environment.

WASHING EFFLUENTS

Washing is a finishing process applied to fibres, yarns, and fabrics.

Washing is normally carried out in hot water (40-100°C) in the presence of wetting agent and detergent. The detergent emulsifies the mineral oils and disperses the undissolved pigments. The choice of the surfactants may vary also depending on the type of fibre. Mixtures of anionic and non-ionic surfactants are commonly used. An important factor in the selection of a surfactant is its effectiveness in strongly alkaline conditions.

Washing effluents are mainly composed of soap, grease, synthetic detergents, detergents and a small amount of bacteria, coliform bacteria, viruses, and other harmful substances, has become an important source of water pollution.

After washing effluents are discharged into natural water, dissolved oxygen is consumed and slightly toxic to aquatic organisms, which can cause fish malformation and eutrophication caused by phosphate solvent.

JIANGSU JIUWU HI-TECH CO. LTD.,founded in 1997, focus on producing Organic membrane filters for many years. And JIUWU HI-TECH has become a leading company in the membrane separation industry. We sincerely invite and welcome people from all around the world to invest and create more values together.

Product Information:

Material :Brass

Logo: 3D Embossed

Plating : Gold Plating

Type: Shank Button

Welcome to contact us if you want to custom military buttons with eagle. You can send email to order@dhmedal.com or call us by 86-769-22900190.

LED Display Overview

A LED display uses light-emitting diodes as a video display. Just like a big TV which can be used both outdoor and indoor.

It is widely used in the hall, hotel, exhibition room, showcase, square, sculptures, symbols, building etc. Because of LED display dynamic and constantly changing, vivid images and videos, live to broadcast, etc many advantages.

Nowadays is most popular for advertising purpose and showing purpose.

The first question before buying a Led display is "where will it be used, Indoor or Outdoor?"

LED Pixel Pitch

One of the most important knowledge when you buy a Led Display.

Pitch stands in distance between the pixels. Example P10 = distance between pixels =10mm.

Pixel can exist of more leds. In Full-color solution, they have 3 leds in 1 pixels (Red Green Blue)

Pitch will determine the viewing distance and the resolution. The smaller the pitch the smaller the viewing distance.

To determine the right pitch is not easy. First, you have to determine the viewing distance before you can choose the pitch. Indoor will mostly have a small pitch. (P3-P10) because the minimum viewing distance is small. Outdoor will have a bigger pitch. (starting from P10...)

LED Display Resolution

LED screen resolution is the basic measurement of how much information a screen shows based on the total number of pixels within the display area and is a significant factor in determining image quality.

The display resolution of Led display device is the number of distinct pixels in each dimension that can be displayed.

It is usually quoted as width × height, with the units in pixels: for example, "1024×768" means the width is 1024 pixels and the height is 768 pixels.

When the Led Display should display clear text. The resolution is very important (like information displays) Most characters on an information display should be around 8 leds high and 5 leds width.

In order to show a good video effect on led display, it will need total resolution 50,000 pixels at least.

In following pages, we will share more LED display guide information. Any questions, please feel free to contact our sales engineers.

LEDFUL, founded in 2008, is a professional led display company in China. If you want to buy led screen outdoor, just contact us! We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

There are 2 colors available for this style: beige and brown. And the only difference of the two colors is the clothes of the girl bears. For the beige girl the skirt is pink while it’s plaid for the brown one. The suits are the same between two boy bears. For each color there are 3 different sizes: 40cm, 55cm, 80cm. There must be a size or style meets your requirement. The Teddy Bear is one of our series of Large Stuffed Animals for wholesale.

We can offer vacuum services if you are worrying about the cost of sea freight. In other words, we can shrink the volume of the packages to save the sea freight without affecting the beautiful looking of the bears. Thanks to the special materials and stuffing, the Teddy Bears are restorable when they were unpacked without any wrinkles to be left on the surface.

Wholesale Teddy Bears in Bulk Stuffed Animals Wearing Suits Clothes Skirts Bow Couples Brown Beige Large Stuffed Animals

Min.Order Quantity:

1000 Pieces per color

Date of delivery:

20 days since deposit

Port:

SHANGHAI

Payment Terms:

L/C,T/T (30% deposit, balanced against B/L )

Quick Details of Wholesale Bulk Teddy Bears Stuffed Animals

Wall cladding is the surface of one building, just like the face of one man, treat your wall with WPC cladding, then you will have one wood-like and natural surface wall, close to nature, close to the wood, but superior to wood in split and rot resistance.

Exterior cladding has the potential to make your property look comple­tely refreshed. With WPC cladding you can make your outbuildings blend into your garden or make any domestic or commercial property stand out with a contemporary makeover.

You will always find the wall cladding you need, because Sundi has the most comprehensive series of wall cladding from co-extrusion panel to deep pattern panel, from traditional panel to Adamas panel. And it is one of the most professional wpc panels manufacturers in China. Sundi has the different production lines to produce different generation wall cladding.

WHY WPC CLADDING

Long lasting and easy going color

Long lasting and easy going color

Natural and classical wood feeling

General wall panel and co-extrusion panel

General wall panel and co-extrusion panel, choose the right one to fit for your house

Sundi WPC: Dedicating to be one of the most professional wpc manufacturers China! Nanjing Xuhua Sundi New Building Materials Co., Ltd is a high technology private enterprise and focuses (focusing) in researching and developing, producing, selling designing and application of the WPC.

Specifications of Plugin Neckline Wedding Dresses

Most details shown below can be customized,for example:dress length,train length,neckline,straps,sash,beading pattern,etc.

Silhouette            A Line

Fabric                Lace

Embellishment         Pleated

Neckline              In Neck

Sleeve                Off Shoulder Sleeves

Back Style            Backless

Shown Color           Ivory