Blogs/News/PSAs

What is PCB with Metal Dome

Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the PCB membrane switch.

They are momentary switch contacts that become normally-open tactile metal dome switches when used in conjunction with a printed circuit board (PCB).

PCB is also known as printed circuit boards or pcb board because it is made by electronic printing.  A printed circuit board is a substrate for assembling electronic components and is a printed board on which a point-to-point connection and a printed component are formed on a general-purpose substrate in a predetermined metal core printed circuit board design.

Metal domes can be divided into several groups: round metal dome, triangle metal dome,  rectangular metal dome, four-leg metal dome(cross shape), square shape metal dome and other special shapes. PCB membrane switches are widely applicable. It can be applied in areas including mobile phones, diagnostic equipment, industrial controls, test equipment, and measurement equipment, etc.

Advantages of Our PCB with Metal Dome

Making smaller and thinner packages possible

Dome switch PCB with high product reliability

Low-profile and lightweight design

Membrane PCB with consistent tactile response

Actuation forces are available to meet any needs of applications

Metal dome switch which is able to be used even in the rough environment

Applications Of metal core pcb design with Metal Dome

CD player

Focusing on three-dimensional assembly characteristics of flexible circuit boards and thin thickness.

The mobile phone

Easy connection of the battery, microphone, and buttons and into one. Focusing on the flexible circuit board lightweight and thin thickness. Being able to effectively save the volume of products.

Computer and LCD screen

Using the one-line configuration of thin thickness and flexible circuit boards.

Disk drives

No matter it is or diskette or the hard disk, it is dependent on FPC high softness and thickness of the 0.1 mm slim.

The latest applications

Hard disk drives (HDDs, hard disk drive) of the suspended circuit and the components of xe packaging board, etc.

What we can do in PCB custom membrane keypad

We are one of the trustworthy best cheap pcb manufacturer. However, PCB assembly is also a very important component for metal dome membrane switch. To meet customers' requests and demands, we have a professional team to help the customers change the PCB circuit into a Polyester printing circuit. There are some metal core pcb prototype designs with space limit which need to be changed from the Polyester circuit or flexible circuit into Double-side or Multi-layer's PCB. That's also one of the services we can provide. In addition, Komkey can provide some PCBA services, such as solder the components and assembling metal dome and different layers' (Overlay, Spacer) in PCB. To learn more about

pcb manufacturing price,and we also have bulk pcb and tock pcb ,we provide wholesale pcb ,please contact us!

As led pcb supplier, we offer all kinds of LED PCB Product. For High-Power LED of the Aluminum Base PCB, copper base PCB, ceramic base PCB, for low-power LED of the FR4 PCB, High-Temperature PCB. As the Aluminum Base PCB of good thermal performance, High-Power LED products most commonly used Aluminum Base PCB.

As one of the most professional led pcb board suppliers in China, We can give different Solder mask options for your Led PCB ,We do lots of R&D on Led PCB solder mask  Lumens to give your Led lights better brightness .

The Applications of LED Printed Circuit Board

The Led benefits  make LED printed circuit boards very desirable for a number of applications and industries. Some of the more prominent applications of Aluminum LED Printed Circuit Board include:Telecom LED PCB,Automotive LED PCB,Computer Led PCB,Medical LED PCB,Led PCB Products: Led Tube , Outdoor LED advertising screen, LED Lamp, Waterproof Led , 1.5m Led and so on.

Led PCB Materials We support:

Fr4 PCB Raw Material

Aluminum PCB Material

Copper Core PCB Material

Ceramic Base PCB Material

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

The PCB on the computer consists of a motherboard, a hard disk, a memory module, a graphics card, and the like.

The plane of the computer motherboard is a PCB (printed circuit board), generally four or six layers. Relatively speaking, in order to save costs, the low-end motherboards are mostly four-layer boards: the main signal layer, the ground layer, the power layer, and the sub-signal layer, while the six-layer board adds the auxiliary power layer and the middle signal layer. Therefore, the six-layer PCB The motherboard is more resistant to electromagnetic interference and the motherboard is more stable.

You won't find electronics PCBs today only in computers - although laptops, smartphones, desktops and tablets certainly can't function without quality printed circuit boards, and printed circuit boards for computers make up a large part of the industry. Instead, you'll find machines containing printed circuit boards almost everywhere you look.

Your television, wireless router, video game system, coffee maker and monitor all operate using a printed circuit board. In the office, your printer, wireless mouse, network hardware, vending machine, scanner, fax, packaging equipment and more all use printed circuit boards, too — in fact, you probably have more printed circuit boards in your office building than people. Today's businesses and homes simply cannot function without reliable printed circuit boards.

Modern electronics and computer applications often require PCBs with higher thermal conductivity so they can dissipate the high heat that comes from fast computer processors or high-intensity LEDs. The type of printed circuit board you will need for your application will vary widely since the size, shape and function of consumer electronics, as each business machine and computer is different from the next. For instance, the type of PCB you will need to power a smartwatch is very different from that you'll find in a television.

The main control chip, flash memory chip, and cache chip are organically combined on one PCB to form the overall shape of the solid state drive.

Our company specializes in producing SSD PCB, and Kingspec is one of our SSD customers.

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

The aerospace industry requires printed circuits with high reliability in extreme conditions. Any electronic product used for flight or combat must be robust, reliable and compact. Aerospace-related electronic equipment typically requires a 50-year lifespan and needs to be able to operate well for decades.

Some of the beneficial properties of ceramic materials for aerospace pcb electronics include:

Thermal expansion coefficient - very close to silicon, much lower than most common metals.

Excellent electrical isolation - long life even at long temperatures.

Good thermal conductivity as an insulator - good for heat diffusion.

Stable dielectric properties and low loss at high frequencies.

High chemical stability relative to many chemicals, moisture, solvents and consumables.

The aging of the material is very slow due to the consistency.

Compatibility with precious metal paste sintering technology - resulting in highly reliable conductors.

High processing temperature - away from normal operating range.

Thermal resistance: There is no typical melting, decomposition or softening.

Mechanical Stiffness - Sensors that allow rigid carriers, hardness and wear resistance to work in vacuum, fluid and industrial contaminated environments.

Anti-EUV, plasma and ionizing radiation, and virtually no deflation in high vacuum, is ideal for sensors used in EUV semiconductor devices.

Our commitment to excellence and innovation allow us to provide our customers with some of the highest quality standards and most advanced circuit board technologies found in the industry today.  Our vastly expanded PCB capabilities, along with an extensive materials selection and cutting edge equipment, make us a premier PCB manufacturing and assembly company that the aerospace and defense industry can depend on.

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

Electroplating can be divided into hard gold and soft gold. Hard gold electroplating is an alloy, so its hardness is relatively hard. It is suitable for use in places requiring force and friction. It is generally used as the edge contact point of PCB (commonly known as golden finger). Soft gold, On the other hand, is commonly used to connect aluminum wires On the COB (Chip On Board) or On the touch surface of mobile phone keys, and more recently, it is widely used On both sides of BGA boards. The distinction of hard gold and soft gold, it is the component of this layer of gold that goes up finally plating, when gold-plating can choose electroplate pure gold or alloy, because the hardness of pure gold is softer, so also call "soft gold".

Function of auxiliary components in    hard gold plating:

Boric acid ACTS: as a buffer, which can maintain a relatively balanced PH value of hard gold-plated PCB plating solution with a concentration of 35~55g/l;

Nickel chloride: it is an anode activator, which can effectively promote the dissolution of anode nickel Angle and avoid the passivation of anode;

Brightener: can improve the brightness of the coating, the brightener used for acr-3010, the control range is 25~35ml/l;

Anti-pinhole agent: it can effectively drive away the hydrogen bubbles on the coating and prevent the generation of pinhole defects;

Brightener and anti-pinhole agent supplement method: in order to add less frequently appropriate, one time do not add too much to the hard gold plated PCB plating solution.

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

What is Via In Pad

The holes drilled on the chip pads on the PCB can be referred to as VIA IN PAD. In the manufacturing process, after the via plating, the resin is filled and then the surface is plated and filled, and the via is not visible when the patch is applied.

As we all know, via in pad technology, the PCB plugging process is a process that is produced by the higher requirements of the PCB manufacturing process and the surface mount technology.

The VIA Plugging In PCB Effect has the Following Points

• Prevents short-circuiting of tin from the via through the component surface during PCB over-wave soldering
• Avoid flux remaining in the vias
• Prevent the soldering of the solder balls from over-wave soldering, causing a short circuit
• Prevent surface solder paste from flowing into the hole to cause solder joints, affecting placement

The advantage of the resin plug hole relative to the solder resist plug hole is that the flatness of the pad of the resin plug hole is higher than the flatness of the hole of the solder resist plug, and the disadvantage is high cost and complicated process.

Via in Pad: Filled with epoxy; Surface Finishing; Plated Copper Over Via.

Welcome to custom VIA IN PAD PCB directly from PCB Manufacturer China Shenzhen at low cost. And welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

Rogers PCB , High Frequency PCB,RF PCB  (Enquiry pls send to Sales@pcbsky.com )

Supporting the military is something PCBSky is very proud of, and we were contracted to assemble a PCB for use in a military communications application. The RF PCB assembly used Rogers 4350, Rogers 4003,RT5880  material, and the board required surface mount technology for the double-sided assembly that featured 250 placements. Board specs included 3 layers, standard vias, and 1 panelization. Final measurements came to 8 x 5.75 in. We performed final testing using automated optical inspections and x-ray inspection before delivering product to the customer.

Serving industries from consumer to military, we continuously strive to build Rogers PCB products that exceed your expectations, to develop long-term customer relationships, and to become your best possible manufacturing partner.

Rogers PCB Material in Stock Normally:

Rogers 4350B

Rogers 4003C

Rogers 3003

RT5880

RT5870

Right now, lots of customers to buy Rogers 4350B PCB. We keep All types Rogers 4350B material in stock, if you need any Rogers 4350B PCB, welcome to contact us .

Rogers PCB Enabling step changes in high-frequency, high-speed performance for wired & wireless communications circuits worldwide with Advanced Circuit Material. Key Products/Brands include: RT/duriod® High Frequency Laminates; RO4000® High Frequency Circuit Materials; RO3000® High Frequency Laminates; and TMM® Thermoset Microwave Materials. For applications such as: Wireless Base Stations; Aerospace & Defense; Automotive; and High Speed Digital.

Rogers High Frequency Laminates

3001 Bonding Film (Thermoplastic Chloro-fluorocopolymer)

RO3000® series High Frequency Laminates (PTFE/Ceramic)

RO3035® series High Frequency Laminates (PTFE/Ceramic)

RO3200® series High Frequency Laminates (PTFE/Ceramic)

RO4000 High Frequency Laminate with TICER Foil

RO4000 laminates data sheet and fabrication guidelines: RO4003C, RO4350B

RO4400 prepreg data sheet and fabrication guidelines: RO4450B, RO4450F

RO4500 Antenna Grade Laminates for High Volume Applications

RT/duroid® 5870/5880 Glass Microfiber Reinforced PTFE Composites

RT/duroid 6002 laminate data sheet

RT/duroid 6006/6010 laminate data sheet

RT/duroid 6202 laminate data sheet

RT/duroid 6202PR laminate data sheet

TMM Thermoset laminate data sheet: TMM3, TMM4, TMM6, TMM10, TMM10i

ULTRALAM 2000 laminate data sheet

ULTRALAM 3000 LCP laminate data sheet: ULTRALAM 3850

ULTRALAM 3000 LCP Prepreg: ULTRALAM 3908

LONGLITE™ AND R/flex® Flexible Circuit Materials - Thin Dielectrics

LONGLITE™ Flex 200 Adhesiveless Materials

LONGLITE™ Flex 300 Adhesiveless Series

R/flex® 1000 Circuit Materials for Long-life Dynamic Flexing

R/flex® 1100 Circuit Materials - High Temperature Laminates

R/flex® 1500 Assembly Adhesive

R/flex® 2001 Laminates and Coverfilms

R/flex® 2005 Laminates and Coverfilms

8080 Liquid Photoimageable Covercoat data sheet

8080 Liquid Photoimageable Covercoat: LP11

8080 Liquid Photoimageable Covercoat: LP2

R/flex CRYSTAL 7500 Laminates and Coverlayers

R/flex CRYSTAL 7700 Laminates and Coverlayers

R/flex JADE A coverfilm data sheet

R/flex JADE A laminates data sheet

R/flex JADE J coverfilm data sheet

R/flex JADE J laminate data sheet

Welcome to custom RF Circuit Board from PCB MANUFACTURER CHINA. And welcome to custom pcb fabrication from PCB MANUFACTURER CHINA. Contact us to know about the rogers 5880 price.

PTFE Teflon PCB has excellent comprehensive performance: high temperature resistance (-192°C-260°C), corrosion resistance (strong acid, strong alkali, aqua regia, etc.), weather resistance, high insulation, high lubrication, no adhesion, Non-toxic and other excellent characteristics.

At present, various types of PTFE products have played a pivotal role in the national economy such as chemical, machinery, electronics, electrical appliances, military, aerospace, environmental protection and bridges.

PTFE Teflon PCB Application

The PTFE Teflon PCB board is suitable for use in electrical insulation materials and linings, supporting sliders, rail seals and lubricating materials for electrical insulating materials and contact corrosive media. It is used in light industry in rich cabinet furniture. It is widely used in chemical, pharmaceutical, dye container, storage tank, reaction tower kettle, anti-corrosion lining material for large pipelines; heavy industry such as aviation and military; mechanical, construction, traffic bridge slider, guide rail; printing and dyeing, light industry, textile Industry's anti-adhesive materials, etc.

Characteristics of PTFE Teflon PCB

Low loss, low dielectric constant, good consistency, stable chemical properties, and almost no moisture absorption. It is often used on RF and microwave circuits where high requirements are required.

1) high temperature resistance - use working temperature up to 250 °C.

2) low temperature resistance - has good mechanical toughness; even if the temperature drops to -196 ° C, it can maintain 5% elongation.

3) corrosion resistance - for most chemicals and solvents, showing inertness, strong acid and alkali, water and various organic solvents.

4) Weather resistance - the best aging life in plastics.

5) High lubrication - the lowest friction coefficient in solid materials.

6) non-adhesive - is the smallest surface tension in solid materials, does not adhere to any substance, mechanical properties, its friction coefficient is very small, only 1 / 5 of polyethylene, which is an important feature of the surface of perfluorocarbon . Moreover, since the intermolecular force of the fluorine-carbon chain is extremely low, the polytetrafluoroethylene has no stickiness.

7) non-toxic - physiologically inert, long-term implantation of artificial blood vessels and organs without adverse reactions.

8) Good electrical properties - Polytetrafluoroethylene has low dielectric constant and dielectric loss over a wide frequency range, and high breakdown voltage, volume resistivity and arc resistance.

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

Custom low cost metal core pcb from professional pcb manufacturer china shenzhen, PCBSKY provides best service metal core pcb prototype .

MCPCB, Metal Core PCB, thermal PCB, mcpcb fabrication -  whichever name you prefer, they are all boards which use a base metal material as the heat spreader portion of the circuit board.

Base metals in the MCPCB board are used as an alternative to FR4 or CEM3 boards for the ability to dissipate heat away from critical board components and to less crucial areas such as the metal heatsink backing or metallic core.

Metal Core PCB Materials and Thickness

The metal core of the thermal PCB can be aluminum (aluminum core PCB), copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys. The most common is an aluminum core PCB.

The thickness of metal cores in PCB base plates is typically 30 mil - 125 mil, but thicker and thinner plates are possible.

MCPCB copper foil thickness can be 1 - 10 oz.

Advantages of MCPCB

MCPCBs can be advantageous to use for their ability to integrate a dielectric polymer layer with a high thermal conductivity for a lower thermal resistance.

Metal core PCBs transfer heat 8 to 9 times faster than FR4 PCBs. MCPCB laminates dissipate heat, keeping heat generating components cooler which results in increased performance and life.

Among all Metal core PCBs (MCPCBs, known for their ability to provide effective thermal dissipation for electronic products), Aluminum core PCB is the most common type - the base material consists of aluminum core with standard FR4. It features a thermal clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum Base PCBs is regarded as the solution to high power and tight tolerance applications.

Pcbsky MCPCB Manufacture

As one of the most professional mcpcb suppliers in China, Pcbsky has been offering MCPCBs manufacturing services for over six years. Our full feature metal core pcb manufacturing process capabilities and value-added options including Free DFM Check allow you to get high-quality metal core PCBs done within budget. metal core PCBs printed by us are widely used for LED lighting, power equipment and automotive systems.

Not only our MCPCB is provided with professional levels of development and production, but also we may provide comprehensive technical support for area of semiconductor lighting from encapsulation to heat conducting and radiating of lamps and lanterns. We may assist, participate and develop independently radiating and heat conductive plan for you according to your needs.

Welcome to custom MCPCB from metal core pcb manufacturer  at very competitive mcpcb cost.

Welcome to custom pcb fabrication from PCB MANUFACTURER CHINA.

Eolane SCM provides a wide range of high quality, low cost flexible silicone rubber keyboard with fast delivery. You are welcome to send your detailed drawings to us for checking the prices. We have express, air, sea deliveries to customers in Europe and the US. And also developed train delivery to save the cost for our dear customers in Europe. Considering the mold cost, it's more than 50 percent lower than that in European factories.

Eolane SCM is a one-stop shop for all possible electronic components. Welcome to contact us for the custom rubber keypad you are looking for.

Semi flex PCB is a flex-rigid PCB, typically 4 layers, made entirely of FR4. Unlike conventional flex-rigid PCBs, the flexing element is not polyimide but a thin FR4 core with two layers of copper specially treated to flex without cracking. A less robust solution uses a depth-milled layer rather than a core.

While this type of flexible circuit may be more expensive to design and produce, it does offer a number of important advantages. For instance, the reduced size makes it easier to fit more components into a smaller space. This can actually help to lower overall system costs. Additionally, because they require the need for fewer interconnects and related parts and components, these flexible circuit board can also prove to be more reliable and require less maintenance in the long run.

As with all types of flexible circuit boards, the semi flexible PCB will perform well in even the harshest environments, especially those featuring extreme heat. A semi-flex  board is also easy to test, making it well-suited for prototyping.

Affordable & Quick Injection Molding Service

1. Competitive price with high quality
2. Knowledgeable and high precision
3. Stringent quality system
4. Planned delivery

Specification of Vacuum Forming Dies

If you are looking for vacuum forming china, just contact us!

Are you looking for cheap multilayer pcb?

Eolane SCM is recognized as a leading manufacturer of printed circuit boards, specializing in the following market segments:

• PCB Prototypes
• Short Runs
• Medium Runs
• Long Runs

Value added services, superior product quality, on-time delivery, and total customer satisfaction are our core priorities.

Multilayer Printed Circuit Board Capabilities

• Max Number of PCB Layers: Up to 36 Layers
• Max Circuit Board Size: 21"x 24" (533.4 x 609.6) (Special Size ,Pls contact us ,Led length up to 1500mm)
• Min Trace/Space: 3 mil (0.0762mm)
• Min Mechanical Drill Size: 8mil (0.20mm)
• Min Laser Drill Size: 3 mil (0.0762mm)
• Max Inner Copper: 5oz
• Max Outer Copper: 11 oz
• Controlled Impedance +/-7%
• Blind / Buried Vias
• Material: FR4, FR4 High Tg, Aluminum, Rogers, Arlon, etc.
• Surface: Lead Solder (HASL), Lead Free Solder(HASL – LF), ENIG, Immersion Silver, Immersion Tin, OSP, Hard Gold, Flash Gold, etc.
• RoHS Compliant
• Class II & Class III
• UL certified
• ISO 9001
• Free E-test on Every Board

Multilayer Flexible PCB Specification

Structural aluminum extrusions (shaped aluminum extrusion , standard or custom extrusions) are made of aluminum alloy billet such AA6060, AA6063, AA6061, AA6005, AA6082, AA7075…

Custom extruded aluminum parts specification

Are you looking for China membrane keypad?

Eolane SCM supplies:

EL back light membrane switch panel

Flat membrane switch

FPC membrane switch

Graphic overlay

LED membrane switch

Copper circuit on PC and PET materials

Options for membrane switch we usually adopt:

No tactile feeling when pressing.

More than 5 million times’ actuation life.

Can be embedded LEDs, inserted EL or EMI/ESD/RFI Shielding layer.

Metal Dome in switch

Offer good click feeling when pressing

More than 1 million actuation

Poly dome in switch

Has similar click feeling and longer actuation life comparing metal dome.

Cost effective competing metal dome.

There are other options for membrane switch, such as embedded LED, inserted EL back light layer, inserted ESD or EMI/RFI shielding layer and sealed structure (water proof function）

HDI boards, one of the fastest growing technologies in PCBs, are now available at Eolane SCM. HDI interconnect board contains blind and/or buried vias and often contains microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards.

There are 6 different types of HDI high density interconnect    boards, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs.

HDI any-layer printed circuit boards are the next technological enhancement of HDI microvia printed circuit boards: all the electrical connections between the individual layers consist of laser-drilled microvias. The main advantage of this technology is that all the layers can be freely interconnected. To produce these circuit boards, RayMing uses laser-drilled microvias electroplated with copper.

Special technologies used with HDI any-layer printed circuit boards:

• Edge plating for shielding and ground connection
• Minimum track width and spacing in mass production around 40μm
• Stacked microvias (plated copper or filled with conductive paste)
• Cavities, countersunk holes or depth milling
• Solder resist in black, blue, green, etc.
• Low-halogen material in standard and high Tg range
• Low-DK Material for Mobile Devices
• All recognised printed circuit board industry surfaces available

HDI high density interconnect PCBs capitalize on the latest technologies available to increase the functionality of PCBs using the same or less amount of area. This advancement in PCB technology is driven by the miniaturization of components and semiconductor packages that supports advanced features in revolutionary new products. This includes touch screen computing, 4G network communications and military applications such as avionics and smart munitions.

HDI PCBs capitalize on the latest technologies available to increase the functionality of PCBs using the same or less amount of area. This advancement in PCB technology is driven by the miniaturization of components and semiconductor packages that supports advanced features in revolutionary new products. This includes touch screen computing, 4G network communications and military applications such as avionics and smart munitions.

HDI PCB China is characterized by high-density attributes including laser microvias, fine lines and high performance thin materials. This increased density enables more functions per unit area. Higher technology HDI PCBs have multiple layers of copper filled stacked microvias (Advanced HDI PCBs) which creates a structure that enables even more complex interconnections. These very complex structures provide the necessary routing solutions for today's large pin-count chips utilized in mobile devices and other high technology products.

Do you want to buy flexible pcb? Flexible printed circuit boards, also called Flexible PCBs or Flex PCBs, derive their name for their ability to enable the circuitry to be designed to fit the electronic device or product, as opposed to building the device to conform to the circuit board. Flex circuit boards are characterized by a distinctly patterned printed circuitry and component arrangement highlighted by a malleable base material.

Flexible pcb board is used widely in everyday technology and electronics in addition to high-end, complex completed components.

Flexible circuits are also used extensively in other applications and industries including:

• Communications
• Consumer Electronics
• Automotive
• Medical
• Industrial
• Aerospace
• Military
• Transportation

In transportation they are extensively used due to their improved resistance to vibrations and movement.

Flexible printed circuit boards offer a number of potential benefits including:

• Saving Space. Flex PCB design requires only about 10 percent of the space and weight of an ordinary circuit board assembly, offering greater installation and packaging freedom. The inherent flexibility also permits tighter bend capabilities.
• Maximum Reliability. A flexible printed circuit board requires fewer interconnects, which in turn requires fewer contact crimps, connectors and solder joints. Simply put, a flexible PCB board does not contain as many potential sources for failure, which enhances their reliability.
• Enhanced Capabilities. The flexible printed circuits boards are compatible with virtually any type of connector or component and works well with options such as ZIP connectors. They also perform extremely well in extreme temperatures and offer superior resistance to radiation and chemicals.
• Cost Savings. Cost-saving advantages of Flexible PCBs include reduced material and packaging demands, lower parts replacement costs and assembly errors that could result in the need for repairs.

These benefits make flex PCBs ideally fit for a wide range of applications in industries such as Military, Transportation, Medical, Consumer Electronics, Automotive, Aerospace, Communications and Industrial.

Flexible Printed Circuit Boards are one of the most popular types of circuit boards used in a variety of industrial and commercial applications. At Eolane SCM, we manufacture flexible printed circuits keeping the needs of our customers in mind. Our circuit boards provide quality and durable performance while being cost-effective in terms of manufacturing.

Flex Circuit Boards Specification

As a professional double sided pcb manufacturer, we are offering our client an excellent quality range of double sided PCB are available in different thickness and track widths. These are precisely engineered using top quality components and using advance technologies by our experts. Our products are widely recommended by clients owing to their excellent features. Besides, clients can avail these products in various customized options and are reasonably priced.

Features of double PCB:

Excellent performance

Precise design

Easy installation

Excellent finish

Reliable

Cost effective

Keeping in mind the precise demands of clients, we offer a wide range of Double Sided PCB board. These devices are available with us in various technical specifications and dimensions as per the exact demands and requirements of clients. Owing to its rich quality, robustness and consistent performance, these devices are widely used by various numbers of clients.

Welcome to compare quality and prices from our different PCB factories. Eolane SCM is an one-stop shop for all possible electronic components. Welcome to contact us for the products you are looking for.

A double sided circuit board PCB and single sided PCB are essentially the same.  The difference being is that a single sided board has copper on one side of the board. Technically speaking, a single-sided board will not have copper plated in the drilled holes either.

The foundation of the PCB is the rigid fiberglass laminate. When it comes to the manufacturing process, there are many types of PCB materials that may be used. Which material gets used is determined by the PCB designer in order to meet electrical, temperature, and other related properties. For this discussion, we will just talk about the standard material that is used, which is fiberglass and often referred to as FR4.

Double Sided PCBs (also known as Double-Sided Plated Thru or DSPT) circuits are the gateway to higher technology applications. They allow for closer (and perhaps more) routing traces by alternating between a top and bottom layer using vias. Today, double sided printed circuit board technology is perhaps the most popular type of PCB in the industry.

There are many different thicknesses available for double-sided boards. Some examples are .020″, .031″, .047″, .059″, .093″, .125″.

Benefits of Double Sided PCBs:

More flexibility for designers

Increased circuit density

Relatively lower costs

Intermediate level of circuit complexity

Reduced board size (which can reduce costs)

We are custom lcd panel manufacturer, specializing in a wide range of TFT and passive matrix Liquid Crystal Display technologies, and etc. : Wide viewing angles, wide color gamut, high contrast, sunlight readability, extreme temperature functionality and more. Even more, we can fully integrate LCD displays into complete display modules with our custom touch screens, cover lenses, and a variety of additional value-added features – so you don’t have to shop around for multiple suppliers. Let our experienced design team create the perfect touchscreen display solution for your product’s unique requirements.

Eolane SCM also offer types of touch panel, resistive touch panel and capacitive touch panel with built-in touch controller.

A wide range of standard size is from 1.8" to 10.1", the FPC connector used for touch panel is available for all the size.

With our highly skill in display, custom made lcd display is very welcome to us.

Our custom design lcd would be based on mechanism dimensions, display mode, display pattern &resolution, connection interface, display luminance, power consumption, cost budget, etc.

Custom TFT LCD module:

Custom make tft lcd module,

* TFT LCD glass

* FPC dimension,

* backlight,

* luminance,

* connection interface

Custom OLED module:

Choose standard OLED display sizes, and semi-custom make for

*FPC dimension

*interface.

PCB Education

Students are our future engineers who will re-shape the world surrounding us. Some of the most creative and audacious electronic research comes from our students in universities or even high schools. Therefore PCBSky.com feels proud to sponsor teachers and students for their PCB needs. The biggest challenge of modern electronics is that the components are so miniaturized that students can no longer use universal boards and the parts can no longer be reliably hand soldered. By streamlining manufacturing processes, PCBSky.com is capable to fabricate your PCBs in as short as 12 hours, and offers PCB assembly under one roof as a consecutive service. Our strong network of parts suppliers makes the sourcing quick, reliable and cost-effective.