Blogs/News/PSAs

Roller conveyor shot blasting machine or conveyor shot blasting machine is the most environment-friendly and the most effective process to remove all forms of rust and corrosion materials from steel plate, pipes, steel structure, h beams, steel tube, profiles, steel angles and channels, etc.

The roller conveyor blast machine can not only remove the rust, but can also remove the welding slag on the structural parts, eliminate welding stress and improve the fatigue strength, increase film adhesion painting, provides ideal surface finish (SA2.5-3.0) for securing a continuous and effective bond between the steel surface and coat. It is used in almost every industry that uses metal, including aerospace, automotive, construction, foundry, shipbuilding, rail, and many others.

Details about Roller Conveyor Blasting Machine

The components crosses the tunnel laid on a roller conveyor, extendible outside with modular lengths. The surface treatment is done during the running through the blasting room:  at one single  pass it is possible to achieve the required finishing degree, according to the specification of standard ISO 8501-1 and SIS SS 055900.

Length of roller conveyor depends on customer requirements. Shot blasting machine for blasting plates and profiles can be equipped with side loading ramps, preheated chambers, scrubbers, with the chamber for painting or drying tunnel. The shot blasting machine is made of solid manganese steel plates. Blast part can be further protected by wear-resistant shields made from manganese steel. Working speed rollers during the process of blasting can be constantly updated. Innovative pressure washers provide high-quality sand cleaning abrasive. The entire device is made in accordance with the strictest European standards.

Qinggong Machinery offers a range of roller conveyor shot blasting machine from small simple machines to construction blasters, heavy duty machines and complete preservation lines. Qinggong Machinery’s extensive experience in this field caters for all component sizes as well as customer specific solutions. Working speeds from 0.5 m/min for a small roller conveyor machine to 20m/min for a heavy skew roll machine are achievable.

According to its working principle, shot blasting machines can be divided into two types, that is, wheel blasting and air blasting. QINGGONG MACHINERY shot blasting machine manufacturer a variety of shot blasting machines to meet your different needs. According to the industry, different types of shot blasting machines can be chosen from. To learn more, you may see the “Industry” applications. Contact us to get more information about our shot blasting machine products.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

Conveyors are used for product conveying. There are different types of the conveyor, which can be used for conveying various kinds of products.

Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency of processing or production. The products can be conveyed from one place to another. There are a large number of different types of conveyors designed to convey different types of products or perform specific tasks. Yiheda can provide you with customized conveyor.

The functions of feeding mechanism of CNC lathe

The functions of feeding mechanism of CNC lathe: The automated feeding manipulator of NC lathe can imitate some movement functions of the human hand and arm, and is used to grasp and carry objects or operating tools according to fixed procedures. It can replace the heavy labor to achieve mechanization and automation of production, and can operate in harmful environment to protect personal safety. The automated feeding manipulator of NC lathe is usually used as an additional device of machine tools or other machines, such as loading and unloading and transferring work pieces on NC lathe.

The use of CNC machine tools instead of manual labor can save costs, improve efficiency and reduce the rate of defective. At the same time, it liberates the labor, makes the tedious work flow simple and easy to operate, and greatly reduces the labor cost.

What is the assistant manipulator? What is the purpose of the assistant manipulator?

What is the assistant manipulator? It is a new kind of auxiliary equipment used for labor saving in material handling and installation. It skillfully applies the balance principle of force to form a gravity-free floating state of materials in the air, that is, the gravity of materials is balanced by the corresponding control system, so that the operator can balance the movement and positioning of materials in space only by pushing and pulling the materials.

The assistant manipulator balances the gravity of the object through the thrust or pull force generated by the cylinder to achieve the assistant effect. By detecting the end fixture of the sucker or the manipulator and balancing the gas pressure in the cylinder, it can automatically identify whether there is a load on the manipulator arm of the manipulator, and automatically adjust the air pressure in the balancing cylinder through the pneumatic logic control loop to achieve the purpose of automated balance. When working, heavy objects are suspended in the air to avoid collision between products.

Basic knowledge of the automatic conveyor belt

The basic knowledge of the belt conveyor is mainly divided into: daily maintenance knowledge, conveyor limitations and conveyor operation rules.

First, what are the daily maintenance of belt conveyor?

1. check whether the belt is degumming.
2. check whether spring is loose or deformed and replaced.
3. check whether the motor has abnormal sound.

Second, what are the limitations of the belt conveyor?

The gradient of belt, the length of conveying material, the nature of conveying material, the width of belt, the running speed of belt, etc.

In addition, there will be special belts for different materials; for example, the belt with bucket slope can be close to 90 degrees, and the gradient of pattern belt can also be relatively large.

Third, what departments are widely used in belt conveyors?

Large ones for coal and mining; small ones for electronics and electrical appliances, and some for chemical industry, tobacco, plastic, etc.

There are also food industries, such as biscuits, bread and so on. The belt conveyor is only one kind of conveying equipment. Conveying equipment is widely used in industries, such as automobiles, household appliances and so on.

Four, operation rules of the belt conveyor

1.The fixed automatic feed conveyor should be installed on a fixed basis according to the prescribed installation method. Before the formal operation of the mobile conveyor, the wheel should be wedges with triangular or brake. In order to avoid moving in the work, there should be a one-meter channel between the machine and the machine, and between the machine and the wall when there are several conveyors working in parallel.

2.Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal and whether the protective equipment is complete. The tightness of the tape must be adjusted to a proper level before starting.

3.The belt conveyor should start at no load. After the operation is normal, the material can be fed. No feeding before driving.

4. When several conveyors are connected in series, they should start from the unloading terminal and start in sequence. After normal operation, the material can be fed.
5. When the tape runs off during operation, stop and adjust it, so as not to use it reluctantly, in order to avoid wearing edges and increasing load.
6. The working environment and the temperature of the delivered material must not be more than 50 degrees centigrade and less than -10 C. It is not allowed to convey materials containing acid and alkali oils and organic solvents.
7. No pedestrians or passengers are allowed on the conveyor belt.
8. Before stopping, the conveyor must stop feeding before stopping the material on the belt.
9. The conveyor motor must be well insulated. Cable of mobile conveyor should not be dragged or dragged. The motor must be grounded reliably.
10. When the belt slips, it is strictly prohibited to pull the belt by hand to avoid accidents.

What are the advantages of automated loading and unloading?

There are three main advantages of automated loading and unloading.

(1)High production efficiency: To improve production efficiency, we must control the production rhythm. Except that the fixed production and processing rhythm can not be improved, automated feeding and unloading replaces manual operation, so that the rhythm can be well controlled, avoiding the impact of human factors on production rhythm, greatly improving production efficiency.

(2)Flexible process modification: We can quickly change the production process by modifying the procedures and gripper fixtures. The debugging speed is fast, and the training time for employees is not needed, so it can be put into production quickly.

(3) Improve the quality of work pieces: Use robot automated production line. From feeding, clamping to blanking, it is totally completed by robots, which reduces the intermediate links and greatly improves the quality of parts, especially the work piece surface is more beautiful.

Yiheda automation, one of custom automation companies, specializes in designing and manufacturing the China automatic production line to customers. We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

The conveyor includes flat belt conveyor, synchronous belt conveyor, plastic chain conveyor, nets chain conveyor, jig straight return conveyor, speed chain conveyor, roller chain conveyor and electric roller conveyor plastic, etc. The conveyor is used in an assembly line and works with the automation machine to achieve multiple functions such as material conveying, NG product unloading, jig and tray conveying, etc. The jig conveyor can implement jig transportation, jig accurate location, jig circular return and jig straight return, etc. All series of conveyors can be customized according to customer demand. The conveyor with low noise, fast speed, anti-static, corrosion resistance, long life, low cost can adapt to various adverse conditions.

Roller conveyor

The conveyor is based on chain and roller, which can make the conveying more stable. Mainly used in the conveying of assembly machine and processing production line, such as mobile phone production line, touch screen production line and electronic products automatic assembly line, etc.

Belt conveyor (internal motor)

There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance, stable quality, short delivery time and customized service.

Belt conveyor ( Driven by head motor)

The motor is inside the head of profile. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications.

Belt conveyor( Driven by central motor)

The motor is inside the central of profile. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance.

Belt conveyor (Short type)

The conveyor works with automatic machine and other conveyors. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance.

Belt conveyor (with block)

The conveyor is used for inclined and separated conveying. With complete specifications, beautiful appearance, stable quality, short delivery time and customized service, the conveyor can meet differerent requirements.

Plastic Chain Conveyor

The conveyor is made of POM, which is low friction, stable and wear-proof, which can complete adjustment via changing a few parts, and the size can be customized according to customer needs.

Mesh belt conveyor

The conveyor overcomes the all the shortcomings of traditional belt such as belt tearing, puncture and corrosion, which makes it become a safe, convenient way of transportation.

Yiheda automation, one of custom automation companies, specializes in designing and manufacturing the China automatic production line to customers. We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

Conveyors are used for product conveying. There are different types of the conveyor belt automation , which can be used for conveying various kinds of products.

Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency of processing or production. The products can be conveyed from one place to another. There are a large number of different types of conveyors designed to convey different types of products or perform specific tasks. Yiheda can provide you with customized conveyor.

The functions of feeding mechanism of CNC lathe

The functions of feeding mechanism of CNC lathe: The automated feeding manipulator of NC lathe can imitate some movement functions of the human hand and arm, and is used to grasp and carry objects or operating tools according to fixed procedures. It can replace the heavy labor to achieve mechanization and automation of production, and can operate in harmful environment to protect personal safety. The automated feeding manipulator of NC lathe is usually used as an additional device of machine tools or other machines, such as loading and unloading and transferring work pieces on NC lathe.

The use of CNC machine tools instead of manual labor can save costs, improve efficiency and reduce the rate of defective. At the same time, it liberates the labor, makes the tedious work flow simple and easy to operate, and greatly reduces the labor cost.

What is the assistant manipulator? What is the purpose of the assistant manipulator?

What is the assistant manipulator? It is a new kind of auxiliary equipment used for labor saving in material handling and installation. It skillfully applies the balance principle of force to form a gravity-free floating state of materials in the air, that is, the gravity of materials is balanced by the corresponding control system, so that the operator can balance the movement and positioning of materials in space only by pushing and pulling the materials.

The assistant manipulator balances the gravity of the object through the thrust or pull force generated by the cylinder to achieve the assistant effect. By detecting the end fixture of the sucker or the manipulator and balancing the gas pressure in the cylinder, it can automatically identify whether there is a load on the manipulator arm of the manipulator, and automatically adjust the air pressure in the balancing cylinder through the pneumatic logic control loop to achieve the purpose of automated balance. When working, heavy objects are suspended in the air to avoid collision between products.

Basic knowledge of the automatic conveyor belt

The basic knowledge of the belt conveyor is mainly divided into: daily maintenance knowledge, conveyor limitations and conveyor operation rules.

First, what are the daily maintenance of belt conveyor?

1. check whether the belt is degumming.
2. check whether spring is loose or deformed and replaced.
3. check whether the motor has abnormal sound.

Second, what are the limitations of the belt conveyor?

The gradient of belt, the length of conveying material, the nature of conveying material, the width of belt, the running speed of belt, etc.

In addition, there will be special belts for different materials; for example, the belt with bucket slope can be close to 90 degrees, and the gradient of pattern belt can also be relatively large.

Third, what departments are widely used in belt conveyors?

Large ones for coal and mining; small ones for electronics and electrical appliances, and some for chemical industry, tobacco, plastic, etc.

There are also food industries, such as biscuits, bread and so on. The belt conveyor is only one kind of conveying equipment. Conveying equipment is widely used in industries, such as automobiles, household appliances and so on.

Four, operation rules of the belt conveyor

1.The fixed conveyor should be installed on a fixed basis according to the prescribed installation method. Before the formal operation of the mobile conveyor, the wheel should be wedges with triangular or brake. In order to avoid moving in the work, there should be a one-meter channel between the machine and the machine, and between the machine and the wall when there are several conveyors working in parallel.

2.Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal and whether the protective equipment is complete. The tightness of the tape must be adjusted to a proper level before starting.

3.The belt conveyor should start at no load. After the operation is normal, the material can be fed. No feeding before driving.

4. When several conveyors are connected in series, they should start from the unloading terminal and start in sequence. After normal operation, the material can be fed.
5. When the tape runs off during operation, stop and adjust it, so as not to use it reluctantly, in order to avoid wearing edges and increasing load.
6. The working environment and the temperature of the delivered material must not be more than 50 degrees centigrade and less than -10 C. It is not allowed to convey materials containing acid and alkali oils and organic solvents.
7. No pedestrians or passengers are allowed on the conveyor belt.
8. Before stopping, the conveyor must stop feeding before stopping the material on the belt.
9. The conveyor motor must be well insulated. Cable of mobile conveyor should not be dragged or dragged. The motor must be grounded reliably.
10. When the belt slips, it is strictly prohibited to pull the belt by hand to avoid accidents.

What are the advantages of automated loading and unloading?

There are three main advantages of automated loading and unloading.

(1)High production efficiency: To improve conveyor production efficiency, we must control the production rhythm. Except that the fixed production and processing rhythm can not be improved, automated feeding and unloading replaces manual operation, so that the rhythm can be well controlled, avoiding the impact of human factors on production rhythm, greatly improving production efficiency.

(2)Flexible process modification: We can quickly change the production process by modifying the procedures and gripper fixtures. The debugging speed is fast, and the training time for employees is not needed, so it can be put into production quickly.

(3) Improve the quality of work pieces: Use robot automated production line. From feeding, clamping to blanking, it is totally completed by robots, which reduces the intermediate links and greatly improves the quality of parts, especially the work piece surface is more beautiful.

Dongguan Yiheda Automation Co.,Ltd, established in 2010, is an expert custom automation company, specializes in designing and manufacturing the custom automation solution to customers. If you are looking for China automatic production line, just contact us!

Conveyors are used for product conveying. There are different types of the conveyor belt automation, which can be used for conveying various kinds of products.

Flexible conveyor is a device designed to transport raw materials, semi-finished products or products in order to improve the efficiency of processing or production. The products can be conveyed from one place to another. There are a large number of different types of conveyors designed to convey different types of products or perform specific tasks. Yiheda can provide you with customized conveyor.

The functions of feeding mechanism of CNC lathe

The functions of feeding mechanism of CNC lathe: The automated feeding manipulator of NC lathe can imitate some movement functions of the human hand and arm, and is used to grasp and carry objects or operating tools according to fixed procedures. It can replace the heavy labor to achieve mechanization and automation of production, and can operate in harmful environment to protect personal safety. The automated feeding manipulator of NC lathe is usually used as an additional device of machine tools or other machines, such as loading and unloading and transferring work pieces on NC lathe.

The use of CNC machine tools instead of manual labor can save costs, improve efficiency and reduce the rate of defective. At the same time, it liberates the labor, makes the tedious work flow simple and easy to operate, and greatly reduces the labor cost.

What is the assistant manipulator? What is the purpose of the assistant manipulator?

What is the assistant manipulator? It is a new kind of auxiliary equipment used for labor saving in material handling and installation. It skillfully applies the balance principle of force to form a gravity-free floating state of materials in the air, that is, the gravity of materials is balanced by the corresponding control system, so that the operator can balance the movement and positioning of materials in space only by pushing and pulling the materials.

The assistant manipulator balances the gravity of the object through the thrust or pull force generated by the cylinder to achieve the assistant effect. By detecting the end fixture of the sucker or the manipulator and balancing the gas pressure in the cylinder, it can automatically identify whether there is a load on the manipulator arm of the manipulator, and automatically adjust the air pressure in the balancing cylinder through the pneumatic logic control loop to achieve the purpose of automated balance. When working, heavy objects are suspended in the air to avoid collision between products.

Basic knowledge of the automatic conveyor for industrial automation

The basic knowledge of the belt conveyor is mainly divided into: daily maintenance knowledge, conveyor limitations and conveyor operation rules.

First, what are the daily maintenance of belt conveyor?

1. check whether the belt is degumming.
2. check whether spring is loose or deformed and replaced.
3. check whether the motor has abnormal sound.

Second, what are the limitations of the belt conveyor?

The gradient of belt, the length of conveying material, the nature of conveying material, the width of belt, the running speed of belt, etc.

In addition, there will be special belts for different materials; for example, the belt with bucket slope can be close to 90 degrees, and the gradient of pattern belt can also be relatively large.

Third, what departments are widely used in belt conveyors?

Large ones for coal and mining; small ones for electronics and electrical appliances, and some for chemical industry, tobacco, plastic, etc.

There are also food industries, such as biscuits, bread and so on. The belt conveyor is only one kind of conveying equipment. Conveying equipment is widely used in industries, such as automobiles, household appliances and so on.

Four, operation rules of the belt conveyor

1.The fixed conveyor should be installed on a fixed basis according to the prescribed installation method. Before the formal operation of the mobile conveyor, the wheel should be wedges with triangular or brake. In order to avoid moving in the work, there should be a one-meter channel between the machine and the machine, and between the machine and the wall when there are several conveyors working in parallel.

2.Before using the conveyor, it is necessary to check whether the running parts, belt buckles and carrying devices are normal and whether the protective equipment is complete. The tightness of the tape must be adjusted to a proper level before starting.

3.The belt conveyor should start at no load. After the operation is normal, the material can be fed. No feeding before driving.

4. When several conveyors are connected in series, they should start from the unloading terminal and start in sequence. After normal operation, the material can be fed.
5. When the tape runs off during operation, stop and adjust it, so as not to use it reluctantly, in order to avoid wearing edges and increasing load.
6. The working environment and the temperature of the delivered material must not be more than 50 degrees centigrade and less than -10 C. It is not allowed to convey materials containing acid and alkali oils and organic solvents.
7. No pedestrians or passengers are allowed on the conveyor belt.
8. Before stopping, the conveyor must stop feeding before stopping the material on the belt.
9. The conveyor motor must be well insulated. Cable of mobile conveyor should not be dragged or dragged. The motor must be grounded reliably.
10. When the belt slips, it is strictly prohibited to pull the belt by hand to avoid accidents.

What are the advantages of automated loading and unloading?

There are three main advantages of automated loading and unloading.

(1)High production efficiency: To improve production efficiency, we must control the production rhythm. Except that the fixed production and processing rhythm can not be improved, automated feeding and unloading replaces manual operation, so that the rhythm can be well controlled, avoiding the impact of human factors on production rhythm, greatly improving production efficiency.

(2)Flexible process modification: We can quickly change the production process by modifying the procedures and gripper fixtures. The debugging speed is fast, and the training time for employees is not needed, so it can be put into production quickly.

(3) Improve the quality of work pieces: Use robot automated production line. From feeding, clamping to blanking, it is totally completed by robots, which reduces the intermediate links and greatly improves the quality of parts, especially the work piece surface is more beautiful.

The conveyor plastic includes flat belt conveyor, synchronous belt conveyor, plastic chain conveyor, nets chain conveyor, jig straight return conveyor, speed chain conveyor, roller chain conveyor and electric roller conveyor, etc. The conveyor is used in an assembly line and works with the automation machine to achieve multiple functions such as material conveying, NG product unloading, jig and tray conveying, etc. The jig conveyor can implement jig transportation, jig accurate location, jig circular return and jig straight return, etc. All series of conveyors can be customized according to customer demand. The conveyor with low noise, fast speed, anti-static, corrosion resistance, long life, low cost can adapt to various adverse conditions.

Roller conveyor

The conveyor is based on chain and roller, which can make the conveying more stable. Mainly used in the conveying of assembly machine and processing production line, such as mobile phone production line, touch screen production line and electronic products automatic assembly line, etc.

Belt conveyor (internal motor)

There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance, stable quality, short delivery time and customized service.

Belt conveyor ( Driven by head motor)

The motor is inside the head of profile. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications.

Belt conveyor( Driven by central motor)

The motor is inside the central of profile. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance.

Belt conveyor (Short type)

The conveyor works with automatic machine and other conveyors. There are many kinds of materials that can be conveyed by the conveyor, with complete specifications, beautiful appearance.

Belt conveyor (with block)

The conveyor is used for inclined and separated conveying. With complete specifications, beautiful appearance, stable quality, short delivery time and customized service, the conveyor can meet differerent requirements.

Plastic Chain Conveyor

The conveyor is made of POM, which is low friction, stable and wear-proof, which can complete adjustment via changing a few parts, and the size can be customized according to customer needs.

Mesh belt conveyor

The conveyor overcomes the all the shortcomings of traditional belt such as belt tearing, puncture and corrosion, which makes it become a safe, convenient way of transportation.

Speed Chain Conveyor

The conveyor makes the loading plate run fast via its speed up function, and stop in a specified operation position through the stopper. Mainly used in tray conveying of all kinds of electronic parts and electromechanical parts production line, such as computer, air conditional, printer and engine production line, etc.

Jig linear back-flow conveyor

The conveyor is driven by motor elastic belt, which can complete high-speed conveying and positioning of multiple stations at the same time. Especially suitable for the stable and high-speed conveying of small parts.

Jig circular conveyor

The jig conveyor is driven by servo motor, the transmission structure can be customized for different loading requirements. With high accuracy and low noise, etc., it can complete conveying and positioning of multiple jig at the same time, mainly used in automatic machine with multiple station and limited space. ​

Electric roller conveyor

The main frame of the conveyor is aluminum profile, with high torque and low power consumption, etc., it can control the speed and direction by PLC. Which is especially suitable for the high speed and stable conveying of bracket and carton, etc.