Blogs/News/PSAs

If you are a bride, maybe you don't know how to choose a wedding dress that suits you. Maybe you can't tell the difference between a white wedding dress, pale yellow wedding dress and  cream wedding dress. Don't worry, here's how to choose a white wedding dress that belongs to you!

Choose the Right White Wedding Garment - Choose the Color Tips: Skin Color

1. If you have a dark or dark complexion, you are most lucky - basically all short white satin dressand white satin dress shortwill brighten your complexion. If you're yellowish or olive, try to avoid yellowish or ivory wedding dresses. Try white or Rum pink styles.
2. If your skin color is generally pink, you can choose a cream wedding dresses.
3. If your skin color is white, then you are most suitable to wear light yellow and ivory color. You should never choose those who are white, they will completely engulf you instead of setting off.
4. If your skin color is generally yellowish, try some diamonds or cheap champagne bridesmaid dresses.

Tips for white wedding dresses:

(1) Rum or champagne wedding dresses

This white with a little pink color will look like a white in the photo.

(2) Silk white, diamond white or natural white

As a white, dark mutant, these colors look as good as white in the photo. As a general rule, most people will be more suitable to wear a soft diamond white wedding dress, it does not look very strange.

(3) White wedding dresses

This is the brightest and simplest white you can find. People with deep skin will wear beautifully.

(4) Ivory wedding dresses

Light yellow and beige also belong to one nature. Some ivory skirts are made of yellow and look very docile and sweet; others will look white and quiet.

If you try on a wedding dress shop, the wedding dress you see is white, but you may see the color difference from the color that you started. In order to prevent the wedding dress from being found and the skin color is not coordinated, please remember to use a sample of fabric, put it on your face, compare it, and see how the color works, and then make the final resolution. In this way, you can choose the white wedding dress that suits you.

Advantages of air source heat pump pros and cons:

1. Energy-saving: the average temperature is above 10 degrees. The unit consumes 1 kWh of electricity and can produce more than 4 kW of heat. It saves more than 70% of electricity bills than electric water heaters, and saves energy much compared to other water heaters.
2. environmental protection: consumption of electricity and free heat in the air, zero emissions, zero pollution, green and environmental protection.
3. Safety: The compressor consumes electric energy to generate high-temperature refrigerant, and the high-temperature refrigerant exchanges heat with water to avoid contact between charged components and water, thus preventing the user from electric shock accident caused by leakage.
4. durable: air source heat pump unit main accessories compressor, condenser, evaporator, four-way valve normal service life of more than 7 years.
5. Wide application range. Applicable ambient temperature range is -27℃ to +47 ℃ and it is used all the year 365 days. It can be used normally without the bad weather such as overcast, rain, snow and winter night. Continuous heating, compared with traditional solar water heater storage type, heat pump products can be continuously heated, continuous hot water supply, to meet user 24 hours needs, suitable for all types of group hot water projects, can achieve unattended, fully automatic operation, centralized supply The hot water is equipped with water temperature and water level display.
6. Low operating costs. The energy saving effect greatly, the investment return period is short, and the air source heat pump can save 70% of energy; compared with the gas, electric and electric auxiliary heating solar water heater, the annual money cost is the lowest, and it is more expensive than the solar water heater (with auxiliary electric heating). It is about 1/3 of gas water heaters and about 1/4 of electric water heaters. Short-term recoverable investment. Consumption 1kW power can get 4kW heat energy capacity, and the same power consumption--but air source heat pump can get the hot water is about 3 times higher than that of electric hot water boilers.
7. Environmentally friendly products. There is no pollution, no burning efflux, no damage to the human body, and good social benefits.
8. Stable performance, not affected by the environment. The products operate all day round throughout the year, and are not affected by bad weather such as night, cloudy, rain and snow. It can achieve hot water 24 hours a day, 365 days a year.
9. convenient. The air energy heat pump occupies a small space and is similar in appearance to the air conditioner outdoor unit. It can be directly connected to the insulated water tank or connected to the heating pipe network. It is suitable for high-rise buildings in large and medium-sized cities. It is the best choice for large central heating problems. No solar collector plate is needed, and the floor space is reduced by 95%. Connect with the solar water heating equipment can reduce the area of solar collectors by 50%, save a large amount of solar collector space, and reduce the volume of the water storage tank.

Advantages and disadvantages of air source heat pump

1. the efficiency is not high, subject to geographical restrictions.

Air source heat pumps have few disadvantages. Because air source energy is a dispersive energy source, the heating rate is slow and the thermal efficiency is not very high. In addition, the air source heat pump is prone to frosting problems, and the air source heat pump is limit by distric place geographical .

2. The compressor is easy to burn out. At present, air-energy water heaters on the market generally adopt a circulating heating system, which operates under high temperature and high pressure conditions, and is easy to age and carbonize the compressor. If the lubrication effect of the system is not good, the compressor is easily burned out.

The condenser scaling efficiency is low :

the low-temperature refrigerant enters the evaporator and exchanges heat with the air. If the air is dusty, the accumulated dust of the evaporator will affect the heat exchange efficiency of the air source heat pump unit after long-term use. The evaporator can be cleaned with soapy water. Rubbing with sandpaper will cause the copper tube of the evaporator to rupture;

when the tap water or groundwater quality is poor, when the high-temperature refrigerant produced by the compressor exchanges heat with the condenser, the condenser coil will foul, the thermal conductivity is reduced, and the heat transfer efficiency is reduced. As the heat builds up in the compressor, high pressure protection occurs.

In the winter, antifreeze work should be done to avoid the expansion of the water in the condenser and the rupture of the condenser heat exchanger coil, which will cause serious consequences for the compressor to enter the water.

Currently, the products have been exported to Western Europe, North Europe, South Africa, Middle-East, South American and Australia market. Sunchi energy group built new 75,000 Watts multi-function Enthalpy Difference Laboratory In the 2012 year, this lab using to strictly control quality.

1. The CNC rebar bending machinemust have product specifications, certificates of conformity and maintenance records, it should be installed on a stable ground, and its cable insulation is good. Zero protection should be reliable. There should be enough sites for stacking steel reinforcement around the machine.
2. Both the belt pulley and the exposed gear must have a protective cover.
3. Before using, it is necessary to check whether the shock protector works effectively, whether the blade has cracks, and we also should make sure that the nut for fixing the blade is firm and not loose.
4. When the rebar bending and cutting machinedoes not reach the normal speed, it can not cut the material. When cutting the material, the operator's hand should only be placed on the side of the rebar which is near the worker's body, and the two ends of the rebar should not be cut with both hands. When the long rebar is cut off, the other side should be especially helped by a professional person to stabilize the reinforcement.
5. When operating, we should use both hands to hold the reinforcing brand aim at the edge of the knife. When the blade comes down and we feels a little press, it is necessary to press the steel bar immediately, so as to avoid hitting the end with the end up.
6. When cutting short material, the length of one part which held in the hand should not be less than 40 cm, and the distance between the hand near the blade and the blade should be kept more than 15 cm. If the part which held by hand is less than 40 centimeters, the short rebar must be pressed down by the casing to prevent injury when cutting.
7. The cutting materials should be cleaned in time. It should be stacked in order according to different specifications.
8. When we operate the machine, it is strictly prohibited to use hand to remove the broken ends and debris near the edge of the knife directly. The people around the machinery who are not professional are not allowed to stay.
9. It is forbidden to cut rebars and red-burning rebars whose diameters exceed the mechanical regulations. When multiple bars are cut off at one time, the section of rebars must be converted.
10. When it is found that the mechanical operation is abnormal or the abnormal sound or the blade is skewed, the machine should be stopped immediately. Workers should pull the sluice to break the power, report the repair of the machine repair personnel, and not repair it without authorization.
11. Operators at night should have adequate lighting, the height of lamps and lanterns is not less than 5 meters and their bulbs should be protected and they should be outside the dangerous areas on both sides of the factory.

Hotel toothbrushes are generally considered as the inevitable hotel supplies products. Yangzhou Yi Lan Mei Hotel Supplies Limited Company has many years' experience in the design, manufacture, and sales of the hotel toothbrush products. Our disposable toothbrush adopts the good quality of raw material to provide the best protection to your hotel guests' teeth. Our hotel toothbrush products offer you with a variety of choice with different colors, design, and patterns in details. Our disposable toothbrush is packed and sold in related toothpaste as a kit. The disposable toothbrush with toothpaste made by Yangzhou YiLanMei Hotel Supplies helps your hotel to bring a fresh and happy morning to every guest.

Our hotel toothbrush with toothpaste has been strictly inspected according to relevant industry standards and requirements. You may have many choices of the toothbrush and toothpaste kit at the different price level. The different material of toothbrush (soft or medium soft toothbrush) is packed with toothpaste of different smell. We have been supplying hotel toothbrush and toothpaste for many brands of hotels all across the world, including the starred hotel, theme hotel, bed & breakfast, express hotel and business hotel. We adopt the most advanced technology and equipment to manufacture the hotel supplies products such as the hotel toothbrush and toothpaste. Thus we are capable of the delivery of large volume order with the preferable lead time. We also provide the customized service to include your hotel logo on the toothbrush and toothpaste packages. In addition, package quantity could also be customized according to your hotel’s specific requirements. We could also provide samples for your further analysis and evaluation. If you are interested in our hotel toothbrush products, please do not hesitate to contact us.sale disposable toothbrushes in bulk and  disposable toothbrush bulk service service,E-mail us more details!

The biggest difference between wedding dress and fashion is that the wedding dress is not the trend of one and three moments, but an eternal fashion and beauty, because you always hope that even after looking at your own marriage for many years, it is the same beauty and not old-fashioned. Looking at the wedding dresses for many years, it is not difficult to find that some styles are enduring. I. Aline wedding dresses

A-line has always been a wedding dress style that many people choose. It is a cut that is gradually enlarged under the buttocks and resembles a capital letter A. It is sought after by many brides with a simple and smooth cut. It is not only elegant and generous, but also gives a streamlined and slender feeling, while at the same time concealing the problem of obesity.Such as simple short wedding dresses.

1. Ball Gown Wedding Dresses

The adult prom dresses are the best choice for a dreamy and gorgeous wedding. It feels extraordinarily luxurious and luxurious. It is like a princess, whcih has a noble feeling. It is a favorite of a dreamy or gorgeous bride. At the same time, it can also cover up the problem of obesity in the lower body, and it is also one of the popular wedding styles.

III. Sweetheart Wedding Dress

The Sweetheart trimmed neckline makes the chest lines fuller and more beautiful, and also makes the neck and shoulders more attractive. For some brides with insufficient breasts, the sweetheart neckline can greatly enhance the lines of the chest, because it can concentrate and push up the fat of the chest, at the same time can make the waist appear slim, shaping a clear curve beauty.

1. Mermaid Wedding Dresses

The Mermaid wedding dress can highlight the curvaceous beauty of women and is suitable for a proud bride. The selling point of this wedding dress is to cut the curve of the female body shape in the near knee position, and to emphasize the curve of the female body shape, and the close-fitting of the chest to the waist, the bride's femininity is revealed. The mermaid wedding dress also makes the bride more graceful and mature, which is most choice to show curvaceous and sexy.

1. Long Sleeve Lace Wedding Dress

Some brides will care about the armpits and underarm skin, however the Lace Sleeves will perfectly cover the armpits and arm positions. The sexy lace wedding dress are also a good detail, which can make the overall shape more rich and exciting. Besides, plus the delicate lace will bring you a retro and noble feeling, rich in aristocratic temperament.

Introduction Of   inflatable air column    

Inflatable Air Column Bags

Air Column Type: Q Cap, L Cap, and Sheet

Colors: transparent

Size: Customized

Material: Nylon + PE

Advantages: Quick inflating, Strong, and Shock-proof

Thickness: 40~80μm

Specifications Of Inflatable Air Column Bags

High pressure pillar to provide satisfying protection

Customizable size to meet your specific needs

Automatic inflation machine available to meet your high-volume needs

High capacity to meet your business needs

Strict quality control to reduce your after-sale needs

Scaled production guarantee a competitive price

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Print And Apply Labeling Systems, just contact us!

20 kw air source heat pump feature :

Save money: Heat pump is a high efficiency water heater, to supply 4kw energy; it just consumes 1kw electric power. So compare to electric heater, it can save 3kw electric energy. Save energy means save money.

Environment friendly: Heat pump only need electric, so it doesn't burn fuels, doesn't exhaust pollution of air and water. It's very clean.

Safe: Compare to common electric water heater, water and electricity is segregated in heat pump, avoid people getting an electric shock when bathing. Make sure humans' safe as Multiple-protections.

Free installation: Heat pumps can be installed in the garden, on the balcony, or on the housetop, or any place you like.

Related Products

Industry 90℃ High Temperature Heat Pump Water Heater

Industry 90℃ High Temperature Heat Pump Water Heater is used in factory, textile, printing, and dying, military industry, steam line, ironing, explosive, medicine high-temperature sterilization line.

Currently, the products have been exported to Western Europe, North Europe, South Africa, Middle-East, South American and Australia market. Sunchi energy group built new 75,000 Watts multi-function Enthalpy Difference Laboratory In the 2012 year, this lab using to strictly control quality.

How do we properly operate the steel bar straightening and cutting machine in daily life?

First of all: When operating the wire straightening theory and cutting machine, select the appropriate straightening die according to the diameter of the wire to be straightened, the diameter of the straightening die should be 2~3mm bigger than the diameter of the wire to be straightened. The head and the tail straightening dies must be placed on the centerline of the straightening cylinder, the middle three can be off the centerline. Generally, we let the wire has a displacement of 3 ram. After the straightening test, if the wire still can be observed with a slow bending phenomenon, it will be corrected by gradually adjusting the offset until the wire can be straightened out.

Second point: In order to ensure the safety and quality of the reinforcing bar straightening operation, the rebar straightening and cutting machine  should be installed on a solid concrete foundation, and the machine shed should be set up in the outdoor work. There should be enough space for piling up materials and semi-finished products next to the machine shed site. The third point: the bearing frame groove should be installed straight, and its center should be aligned with the center line of the guiding cylinder, the straightening cylinder and the lower cutting hole. The wire turntable mounting should be installed at a distance of 5 to 8 m from the straightening machine.

Fourth point: Before the official start of operation, the wire straightening and cutting machine should run idle motion for 2 hours, then check the temperature of the bearing and whether the hammer head, cutter or cutting gear is working properly. After confirming that there is no abnormal condition, the machine an be fed and tested for straightening and cutting ability.

Fifth point: The newly installed wire straightening and cutting machine should be checked whether the electrical system and components are damaged, whether the connection and joints of each components are firm and reliable, whether the rotating parts are flexible, and whether the performance of the transmission and control system meets the requirements. We can only run the test operation after all the above aspects are ensured to meet the requirements.

Sixth point: The fixed cutter should be adjusted appropriately according to the position of the movable cutter. The gap between the upper and lower cutters should be no more than 1mm wire. Some preparatory work should be done to ensure the side gap be no more than 0.10~0.15mm before the cut and bend steel machine is processed.

When it comes to 4D films and televisions, what will you think about? Besides famous movie stars, good script plays, I think for some friends who like watching movies and TV, what do the they care about? Director? Yes. A good director can make a perfect interpretation of the script with the excellent acting skills of outstanding actors.

Therefore, every link of a film and television work can be used as a bright spot for packaging.

As the audience watch the stereoscopic film in the 4d movie theater, with the changes in the contents of the film and television, they can truly feel the special effects of the storm, thunder, rain, impact, water spray, and sweep of legs. But how much do you know about this special effect? I may as well uncover the formation of the following ten special effects.

1. The Low Frequency Vibration Special Effect of 4D Seats

Low frequency vibration special effects can automatically simulate many kinds of vibration experiences such as earthquakes, rocket launches and explosions. It greatly improves the sound effects experience of 4D films. The low-frequency vibration equipment is built in the back of the seat and is used in conjunction with the sound equipment. When working, it can generate the vibration frequency of 15Hz to 250Hz.

2. The Water Spray Effect of 4D Motion Seats

When using the water spray effects, it will spray a small amount of water to the audience's face, which is mainly used to simulate water pipe rupture, waterfall and other scenes. The water in the special seat comes from the pressurized water in the equipment room. And the pressurized water is purified and softened, so it is more environmentally friendly. The water and effect are controlled by the low pressure control valve, and the time of water spray is controlled by the special control system of the computer. The special effect of water spray is realized through the nozzle of the back plate of the seat. Since there is no seat in front of the first row, there will set a sprinkler railing in front of the first row during construction.

3. 4d special effectson Cinema

The wind special effect is also called the jet effect. The compressed air can be quickly sprayed to the head and neck of the audience when the wind special effect is used. It is mainly used to simulate a variety of fast-moving airflow or the rapid feeling by the passing of the objects. It is realized by the two air spout on the back of the head of each seat. For example, we can use this special effect at the moment when the snake opens its mouth.

4. The Sweeping Leg Effect of 4D Dynamic Chair

With the sweeping leg effect, the special hose will beat the audience's legs synchronously with the scene of the film. It can simulate the feelings of the snakes, mice, insects and other animals which can burrow down beneath the legs. It is realized by the messy movement of the PU tube at the bottom of each seat cushion during intermittent ventilation.

5.The Stabbing Special Effect of 4D Movie Seats

With the stabbing effect, the thin cylinder in the back of the seat will move back and forth, so that the back of the audience will be impacted. They will feel a strong sense of "stabbing" and "electric shock". This effect is mainly used to simulate the circumstance of shooting the body or the circumstance of inserting sharp knife into the body. For example, in the Amazing Spiderman 2, we used the stabbing effect when the electronic optic people sent high voltage electricity to attack the Spiderman.

6. The Rolling Ball Special Effect of 4D Seats

When using the rolling ball special effect, the pulley in the cylinder under the cushion will move back and forth to the ground, which is used to simulate the sensation of the objects on the thighs in the movie. This special effect is mostly used in the cartoon.

7. The Full Lifting and Full Dropping Special Effect of 4D Seats

The full lifting and full dropping is one of the special effects of the platform. When this special effect is used, the front left, front right, back left, and back right four airbags of the seat platform will drive the seat to rise and drop firstly. When editing the film, the start time and end time of the first left, front right, left and back right four special effects are the same. Through the control of duration time can simulate a variety of scenes, such as earthquake, animal jumping and so on. For example, when we needed to simulate the scene of the rapid descent of Spiderman from the sky, we used the full lifting and full dropping special effect.

8. Leaning Forward and Leaning Backward Special Effect of 4D Cinema Seating

Leaning forward and leaning backward is the second special effect of platform movement, which can be subdivided into two special effects: forward and backward. The leaning forward special effect is achieved through the movement of the two airbags of the rear left and rear sides. And it is mainly used for simulating scenes such as a man would be leaning forward when the being knocked down. The leaning backward special effect is realized through the movement of the two airbags of the front left and the front and the right. It is mainly used for simulating the scene of a man or an object moving backward.

9. The Left Tilting and Right Tilting Special Effect of 4D Motion Effect Seats

The left tilting and right tilting is the third special effect of platform movement, and it can also be subdivided into two special effects: left and right. The left tilting special effect is achieved through the movement of the two airbags of the front right and the right. It is mainly used to simulate the scene of a man or an object tilting or moving to the left. The right-tilting special effect is achieved through the two airbags of the front left and the left, which is used to simulate the movement of a man or an object to the right.

20. The Shocking Special Effect of 4D Motion Effect Seats

The shocking special effect is unlike low frequency vibration, the low frequency vibration is mainly to enhance the sound effect experience of the film. But the shocking effect is mostly used to simulate the scene of the instantaneous earthquake and explosion. It is also realized by the total rising and total dropping of the same four airbags. However, when using this special effect, the starting time and the end time both are different.

4DMAX was established in 2010, our main products are 4D movie theater, themed park 5D cinema, 4D home cinema, home cinema dynamic chair, VR cinema,etc.we have a branch office in Guangzhou.

1. How to train for splitsand what does split ticket mean?

You can collect tickets from ANY valid ticket machine in the UK. Please follow these instructions:

Step 1: Tap 'Collect Pre-Paid Tickets' at the ticket machine.

Step 2: Insert the payment card you used to purchase your tickets. Your card will not be charged.

Step 3: Enter your Booking Reference number (shown in 'My Tickets' or in your confirmation email).

Step 4: Tap 'Print' on the screen and wait for your tickets to be printed.

Important tips:

- If you have any problems collecting your tickets from the self-service ticket machine, please go immediately to the station booking office.

- If the station is unattended, please call our customer service team on (+44) 203 985 6088, before your train departs. Calls to this number are free 24/7.

If you have any further questions, please do not hesitate to contact us and we will be happy to help.

Email: en_trainpal@trip.com

Phone: (+44)0 808 196 9996 (FREE, 24/7)

2. Can I reserve a seat?

Yes, no matter what type of ticket you reserve, you can book seats for free. However seat reservations are not guaranteed, and some train operators even do not offer seat reservations at all. Even if there are no reservations, your ticket is still valid. You can sit in any empty, unreserved seat.

We always try our best to reserve seats for you by using the preferences you offered us. If you don't get a seat reservation, there may be several reasons:

(1) Reservable seat allocation is fully booked, or you book tickets near departure time and seat reservations are closed. Don't worry. Some seats are always unreserved. You can sit in any empty unreserved seat.

(2) The train operator you are traveling on does not provide seat reservations for the train, which is common in shorter routes and peak travel times on commuter routes. On these trains, you can sit in any vacant seat reserved for the class.

(3) You booked your ticket before your seat was opened. Seat reservations are usually open three months in advance. If you book a flexible ticket (at any time, non-peak or ultra-high peak), you will not be able to get a seat, but you can reserve a seat closer to the seat. Time.

3. Can I change my seat reservation?

We are sorry that seat reservations cannot be changed for the moment.

4. Can I upgrade my ticket to first class?

Yes, you can upgrade your ticket to First Class at any time before you board the train.

Usually, the fare will be the cost of the First Class ticket(s) for the journey you wish to make, minus the value of the ticket you hold.

Please be aware that buying a ticket on the train, if you had the opportunity to buy beforehand, may leave you liable to a Penalty Fare.

Korean wedding dress

In Korea, where there are many many beauties, clothes are also super beautiful.

Korean costume is a kind of costume developed after the Han costume of Ming Dynasty was introduced into Korea. It was formed in Lee's Korean era (1392-1897 A.D.). It features bright colors and no pockets. Simply put, a colorful Korean dress consists of a tight long-sleeved jacket and a pair of high-waisted trousers. This kind of bell-shaped clothes can be traced back to the period of the German-Tibetan Dynasty.

Simply, a colorful Korean dress consists of a tight long-sleeved jacket and a pair of high-waisted trousers. This kind of bell-shaped clothes can be traced back to the period of the Moral-Tibetan Dynasty.

In South Korea, it is generally believed that Korean clothes have three major beauty, the curve of sleeves, the white half-skirt and the shape of skirts. The lines of Korean clothes have the beauty of both curve and straight line. Especially the short jacket and long skirt of female Korean dress are thin and thick and it dignified and elegant. Korean dress, with its ancient philosophy, is not only beautiful but also practical. Such as vintage casual wedding dresses,wedding dresses classic vintage and vintage themed wedding dress.

Even today, with a high degree of openness of mind, Koreans will be cautious about the colour of Korean clothes, because some colours are easy to expose their age.

One point needs to be pointed out, each Korean dress is tailored, and each is customized, so no Korean dress will be worn everywhere.

We have air pillow machine for sale!

Introduction Of LA-E3 PLUS High-Speed Air Pillow Machine - Industrial Class

Air Cushion Machine- an industrial class, reliable and on-demand protective packaging system with speed 28m/min. It is great for all void-fill applications, including mail order fulfillment, ecommerce, pharmaceutical, third party logistics, and contract packaging.  with fast speed 28m/min which is deal for high volume packing. LA-E3 Plus Air Cushion Machine use together with Locked Air inflexible integration delivery systems which can support 32 workstations will achieve high packing line efficiency and productivity.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Paper Void Fill Machine, or want to know more about air pillow machines suppliers and products, please contact us!

Product Description

 Swimming Pool Water Heater Overview

heating capacity 12kW/19kW/35kW/45kW

R410A refrigerant

380V~440V 50Hz power supply

Best way connect with the solar water heater to together heating the swimming pool, it's running at the lowest cost.

12kw suit for 27.43cube meter pool

19kw suit for 43.42cube meter pool

35kw suit for 79.85 cube meter pool

45kw suit for 102.82 cube meter pool

The swimming pool inverter heat pump unit uses heat pump technology to get heat energy from the air and heat the water, and the water and electricity are completely separated. It has no open fire, and produce no harmful gas. It is safe and environment-friendly. Compared with the hot water equipment that uses other energy sources, it can save 65 to 80% of the operating expenses. All the heat exchangers are made of titanium alloy, which can help resist the chloride ion corrosion in water and is harmless to the human body.

Product Application Place: It is suitable for heating the indoor and outdoor swimming pools of hotels, bathrooms, families, etc.

Main Functions of Swimming Pool Heat Pump:

Swimming Pool Titanium Tube Heat Exchanger: It has excellent corrosion resistance and can resist the chlorine ion corrosion in water. It has a high heat transfer coefficient and heat transfer effect, it is one of the ideal choices of swimming pool equipment.

High Energy Efficiency Compressor with Reliable Performance and Durability: Adopting American Copeland high-efficiency flexible scroll compressor, the operation performance of the unit is stable, and the heat production efficiency is high. It has professional gas balance and oil balance design, which can ensure the stable operation of the unit.

Full Intelligent Control with Real Color Luminous Design Display.

Intelligent Refrigerant and Oil Control Technology: Advanced system design, intelligent refrigerant together with lubricating oil control technology can effectively avoid the oil deposition and improve the reliability and efficiency of the system. The humanized design of the control system ensures convenient operation.

SUNCHI swimming pool heat pump water heater is a device that uses the principle of reversed can't cycle to recycle and release the evaporated heat back to the swimming pool or the indoor sir to keep the swimming pool and room remaining at constant temperature and achieve the effect of dehumidification.

That is, using a small amount of electric energy to drive the compressor. The high pressure liquid medium evaporates into gas in the evaporator after passing through the expansion valve and absorbs the heat energy in the ambient air in large amount. Then the gaseous medium is compressed into the liquid of high temperature and high pressure by the compressor and enters the condenser, the condenser releases the heat energy and heats the pool water. The above process is repeated constantly to heat the pool water.

Solution of Swimming Pool Hot Water Project

1. The initial intake and circulating water filtration should be taken into consideration during the swimming pool water treatment, continuous physical and chemical filtration and disinfection should be used to ensure the good quality of the water.

Solution: Adopting the heat supply mode of "circulating heating system". That is, " Hot water unit, circulating official network together with hot water pool". This heat supply mode is energy-saving, environment-friendly, safe and has intelligent automatic management, it is an energy-saving and environmental-friendly constant temperature system with the most operation benefit at present.

2. Artificial swimming pools should be replenished with cold water at the fixed time and to the fixed water level during opening hours

Solution: Using the external circulating eco swimming pool heat pump to provide the circulation power of hot water loop. A hot water pipe interface with upper and lower parts is equipped in the heat insulating water tank. The vertical direction of water temperature presents a clear gradient, and the hot water is fully utilized. The piping interface is linked with the main engine and the circulating water pump, thus forming a closed hot water circulation loop.

3. Design of the swimming pool water supply and backwater system should be reasonable, and the facilities should ensure operation safety and convenience

Solution: Initial heating requires multiple air source heat pump heating devices to gradually heat the pool temperature to the set temperature through cycling. The swimming pool uses a moderate amount of air source heat pumps due to the heat dissipation of the pool surface and the cold water supplement. Besides, we can consider using the idle units for indoor heating, to provide shower hot water and floor heating for customers. We can also consider using the air source as the main heat source equipment, and under the harsh working conditions in winter, we can supply heat by other ways, such as electric auxiliary, boiler, water source heat pump, etc.

Specification

Swimming Pool Heat Pump Specification

Test Condition :Ambient temp.(DB/WB):20℃/15℃,Input/output water temp.=15℃/28℃                                                                                                 

Note: indoor swimming pool with a circulation rate of the basic unit routine follow: 1HP: 10 tons                                           

 (without pool refill water)

Introduction to the Application of Wire Drawing Machine

Wire drawing machine is also known as wire drawing bench, which is used a wide range of mechanical equipment in industrial applications.

Wire drawing machine system is a very high demand for speed control equipment, the control system can provide very accurate, smooth linear velocity. While gold wire drawing machine has higher request than ordinary wire drawing machine. The whole system is complex, it needs more demanding coordination between the motor.

The system uses 4 sets of servo motor control and has the real time data exchange between each servo, Kinco’s communication ability can completely satisfy the various data real-time interaction between the shaft.

System needs more quick data between the interaction of the motor shaft, in order to ensure the wire line can be calculated in accordance with the requirements of the algorithms track wire in place side by side, and also make full use of the function of internal firmware kinco servo, through the calculation of drive themselves, to drive motor wire, omitted the traditional drawing machine control system is calculated by the controller position of silk and then transmitted to the drive caused by time delay, affirmed the wire delay minimization.

Each Component Function of Wire Drawing Machine

Screw: screw extruder is one of the most important components, is directly related to squeeze molding machine and the application scope of productivity. PP screw generally divided into three sections, delivery period, the material cannot but to pre heat in plasticizing, its main function is the transmission. Followed by compression section, the screw groove by gradually decreases, and the temperature to achieve the plasticizing degree, in order to complete the plasticization. Final is the material plasticizing metering section, in addition, the material keeps plasticizing temperature, conveying material and with a certain amount, in order to supply the nose, also cannot under plasticizing temperature.

Screw tubes: the main implementation with the screw, realize the plastic softening, plasticizing to get sufficient heat and plastic into a principle.

Die-head: The role of die-head rotation movement of the plastic melt into a parallel straight line, and give necessary to plastic molding pressure, plastic plasticizing compaction in the barrel, the filter in a passage through the membrane into the head, neck through the diaphragm to shape.

TJK is the largest manufacturer in reinforcing steel and wire processing machinery in China.

4DMAX 9D VR Cinema Experience Center

By Guangzhou Yingda Technology Co.,Ltd. 2018-06-08

4DMAX 9D VR cinema entertainment experience center is the places which they can make viewers enjoy stimulation immersive&shocking VR experience,the 5DOF 9D VR chair movements can sync with playing the action movies completely,it can be most experienced in many places, such as theme park, shopping mall, VR hall, etc,we have our own professional VR film production teams, hardware team, intellectual rights, etc,we should supply one-stop after-sale services for customers.

New Design 360 spinning 9D VR Experience Hall

By Guangzhou Yingda Technology Co.,Ltd. 2018-07-15

By seated in our new design crank 360degree spinning VR chair, you will enjoy visual wonderful VR experience by wearing VR headset,you will feel different wonderful scenery&met wind,rain effects like 5D cinema, films are undersea adventure, roller coaster, kid movies, Mars space, etc,Yingda will also supply our custom-made film contents service for customers,it will make your VR hall become special&interesting in this VR industry, such as VR experience exhibition, VR cinema, VR education, VR fire, etc

4DMAX 24seater 9d vr simulator Theater Panoramic Scheme

By Guangzhou Yingda Technology Co.,Ltd. 2018-07-15

There are totally 24 people in this VR dynamic theater,1person/seat,6seats/row. The dynamic seat is our 5DOF VR dynamic seat that can spin left/right 360 degrees, swing from side to side, back and forth, up and down. The VR dynamic seat is our patented product of Yingda technology. The VR theater also adds the environmental effects such as wind, rain and smells like 5D cinema, the audience can not only enjoy the immersive VR experience.Y ou can also experience a variety of 5D cinema environmental effects. A perfect visual feast awaits your experience.

Shoes or boots play the equivalently important role in the business appointment, negotiation, conference as well as lecture or speech in our daily life nowadays. As a result, for an already successful or a prospective businessman or businesswoman who travels a lot in their daily work, the shoe care products may be accounted as one of the critical factors for them to choose and determine the specific hotel to stay or certain hotel brand to stick to. Thus, shoe care supplies products have definitely to be included in the list of hotel amenities catalog, especially for the business hotel.

Yangzhou YiLanMei Hotel Supplies Limited Company as a professional manufacturer with many years experience in the hotel amenities industry has served for many different type and ranking of hotels located all over the world. To meet our hotel worldwide customers' diversified requirements, Yangzhou Yi Lan Mei Hotel Supplies Limited Company has also made efforts to provide the varied choices of hotel shoe care supplies. Our shoe care accessories include different categories ranging from the hotel shoe cloth, hotel shoe horn and hotel shoe polisher, etc. For each specific category of shoe care products, we also offer different choices made from the varied material, with diverse color, shape, decoration, and pattern as well as size design. All of our hotel shoe care products are subject to the strict incoming, in the process and outgoing inspection conducted by our dedicated quality team. In addition, our manufacture process has been certified with ISO9001, ISO14001, GMPC, ISO22716 authentication. This is the main reason why our quality shoe shine supplies wholesale have obtained the extensive and constant trust from all of our hotel customers located in different countries and regions worldwide. We strive to meet your individual needs and demands with our hotel shoe care products. For more information, please do not hesitate to contact us.

1920s: The Beginning of World War I

This is a time when women began to gain social status (voting rights) and liberate themselves from the big dress braces of the past. Large skirt hems were abandoned and gradually appeared short skirt design in pursuit of the great liberation of clothing. Overskirt dresses design appears in pursuit of the great liberation of clothing. The wedding dress of this era always has a beautiful A-shape, and the cloth is mostly delicate and soft lace, showing the elegance of Roman style. Such as short red satin dress and short red cocktail dresses.

In 1928, the wedding dress, regardless of the length of the style, has a long tail. Short dress wedding dress with tail dress. This is also extremely smart in today's era.

1930s: economic downturn

Affected by the economic contraction after World War II, wedding dresses in this era did not focus on decoration, but touched people with fashion-like shapes. Compared with the previous A-shape, the fitness curve from chest to waist line is more emphasized. In addition to fashion-like lines being used, a wide variety of headwear is also popular to make up for the gorgeousness of the dress itself.

1940s: Emphasizing Practicality during World War II

By the 1940s, people were paying more attention to practicality because they were still at war. Instead of pursuing long skirts, choose small mop skirts. Skirts are more inclined to the design of foam sleeves. The tight waist is the highlight, and the headdress is usually worn with a hat.

1950s: Star-led fashion trend

In the 1950s, Dior's "New Wedding Dress" with waistband and wide-hem umbrella skirt not only became popular throughout the century, but also strongly impacted the fashion style of the wedding dress industry. In this era, the wedding dress of Princess yarn and big pendulum was rapidly popular, while the ballet corset dress and long skirt collar became the mainstream of the wedding dress.

Introduction Of LA-F1 PRO High-Speed Air Bubble Machine - Industrial Class

Air Cushion Machine- an industrial level on-demand inflatable  air bubble/tube cushioning systems with speed 28m/min for industrial business, packaging and shipping stores which is deal for high volume packing. air bubble packing machine   is great use on bubble wrapping which offers a lightweight, space saving, clean solution and best unboxing experience compared with traditional bubbles to provide excellent product protection in minimal. LA-F1 PRO Air Cushion Machine together with our inflexible integration delivery systems will achieve high packing line efficiency and productivity.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Inflatable Protective Packaging, just contact us!

Our SUNCHI New Energy produce 2 types solar powdered air conditioner - DC48V 100% solar air conditioner and ACDC hybrid solar air conditioner. Solar air conditioning unit:we offer a wide range of air-conditioning products from single units to flexible, multi-unit systems. Our solar ac system come in a range of capacities and combinations to suit domestic and small commercial applications, while our sophisticated VRF-KX series provides heating and cooling solutions for commercial and industrial uses. The use of solar power is eco-friendly and energy-saving.

Are u ready to experience a new way to watching movies? Are u reay to try a new form of entertainment like u are In the story?

We are! A warm welcome our very good friend Mr Ahmed from Saudi Arabia come and discuss about their 9d virtual Rreality cinema 9seats with us. For this vr cinema project, we will offer whole equipment for Mr Ahmed include 9D Virtual Reality Chair, 3Glasses VR helmet and whole VR cinema Control system.

As for our 360 vr chair, it is new 1rt&2rd generation VR chairs, it can not only fully realize 5DOF motion effects when experiencing it, such as 3DOF(vibrating,swing forward/back,up/down,forward/back)+2DOF(Left/right 360°spinning movements),also including VR interactive contents, rain, wind, smell, fog effects etc. It can make audiences enjoy shock&realistic experience with free 360° vision,there are many places using our VR chairs in the world,such as amusement center,shopping mall,theme park,etc,

We should promise that we will supply our 4DMAX unique design&top quality VR chair for our customers,the full equipments are including 9D VR chair,VR play software,VR PC Control System,PC cabinet,VR Movies,VR headset,Wiring parts etc. If u are interested too, pls feel free to contact us. www.yd4dmax.com.

Watching your favourite movies has never been so immersive as in our VR Cinema! Bringing the atmosphere of your favourite cinema straight to your home enables you to relive all those exciting moments you had when you first stepped into the auditorium!

VR Cinema allows you to see your favourite movies in virtual reality,creating a full, eye-opening experience with the latest3Glasses headphones and 360 degree rotating motion vr!

4DMAX was established in 2010, our main products are 4D movie theater, themed park 5D cinema, 4D home cinema, home cinema dynamic chair, VR cinema,etc.we have a branch office in Guangzhou.