Blogs/News/PSAs

The models of different brands have different belts because of different engine models. Generally, there are four types of belts: generator belts, air compressor v belt, booster pump belts, and timing belts. The belts of air conditioners and booster pumps of most models are the same, because the number of grooves of air conditioner pulleys and power pump pulleys is the same, and the same type of belt can be used for both. The generator belt is generally a single piece, but it also varies from car to car. There are also many types of generator belt, air conditioning belt, and power steering pump belt that are all in one. There is only one long belt that runs through all the pulleys.

The belt is an important accessory for the normal operation of the engine. Without a belt, there is no transmission of energy. Therefore, when we usually use the car, we must regularly check the wear of the belt. There are grooves on the inner side of the belt, which is also a sign to distinguish the belt model. Generally, it depends on how many grooves the pulley has. For example, if the belt has 5 slots, the belt must be 5PK; if the belt has 6 slots, it must be 6PK. On the front of the belt, there is generally the name of the belt model. We mainly look for the two letters PK. The number in front of P represents the groove number of the pulley, and the number after K represents the length of the belt. If the front number of the original car belt cannot be seen, then the specific belt model can also be determined based on the engine model. Don't worry about this.

Regular inspection of the belt can avoid accidents. When the car is running at high speed, it is still very dangerous for the engine to lose kinetic energy due to the broken belt segment. Usually you can often observe the depth of the belt's clamping groove. If the depth is very shallow, it is easy to cause skidding. Then check the edges of the belt to see if there are any gaps or breaks. Once found, it should be replaced in time.

We know that electronic products are fragile.Use ordinary bubble film, still very easy to break in the transportation. Bingjia provide efficient air cushion package to fully protect your products from breakage and deformation during transportation.

BingJia Technology is one of the leading air bag packaging suppliers,we have Air Cushion Packing System,you can trust us and buy our productions.

Reliable. Efficient. Innovative

Locked Air® is a globally trusted air void fill solution provider with satisfied customers worldwide.

Using latest technology in protective air cushion packaging, Locked Air® will perfectly protect your products in transit and make your packing process efficient and easier.

Our focus is bringing you reliable, newest technology that requires minimal technical intervention in the long-run.

Technology of Air Packaging Machine

Locked Air® achieves a 99.99% pass rate compared to 70% to 95% of the industry

From following technologies:

1.Dynamic sealing technology, including linear pressure, temperature auto-adjustment and tension control. No wrinkles - patent 201420439958.6

2.Air control design. Positive inside air pressure-patent 201420398325.5.  

3. Patterned air channels, strong sealing-patent 201420657795.9

Strict Quality Control of Air Packaging Machine

We have a rigorous quality control process which will help to improve the design of our products continually. To give you peace of mind, our air cushion systems have been designed to withstand extreme shipping environments and they can be operated under extremely hot and cold circumstances. Every component is tested to destruction so you can rely on flawless performance.

We test our machines in full for 24 hours before delivery to reduce down time interruption and to ensure you can produce void fill without hassle as soon as they're delivered.

Save Valuable Space

The Locked air air cushion system has a compact footprint that takes up less dedicated inventory space, only produce air cushions film on demand,  

Safe & Low cost Shipping

Light weight air pillows save on shipping costs. The soft and flexible patterns of cushion films provide best protect from shock during the transportation.

Fast Packing

Easy tear air cushions film support variable packaging demand. Speed up your warehouse throughput.

Wonderful User Unboxing Experience

Customized LOGO print, clean and dust- free packaging promotes the image of the enterprise, improves customer satisfaction and possibility of returning order with superior product clean protection.

Our company have Inflatable Protective Packaging,air cushion machine for sale and air pillow machine for sale,if you want to know air cushion machine price,you can contact us.

The big air industrial ceiling fans belong to a kind of ceiling fan which is produced by utilizing the dynamics of ambient air. It is highly praised by users in the market. The reason is that professional big air industrial ceiling fans aggregate various advantages and can effectively provide ventilation for a variety of different venues. Let's take a look at the main reasons for the popularity of the big air industrial ceiling fans.

First of all, this big air industrial ceiling fan is cost-effective and energy-saving. Although it is a high-tech ceiling fan, the design of energy-saving and environmentally friendly materials will not be too high in price, and the low speed will not cause users to consume high power. Moreover, it has a long life, so it is more cost-effective and more popular with users.

Then, the big air industrial fan run very smoothly and are safe to use. All kinds of fasteners are one-piece installation. Moreover, this ultra-large energy-saving ceiling fan can run continuously for a long time, improving the space environment for users. It does not cause the motor to overheat and malfunction due to long running time. The ceiling fan itself has a cooling function, and the low speed operation does not cause too much heat, so users are willing to choose.

Company Profile

Jiangsu Gaxiao, one of the professional commercial fan manufacturers is located in Suzhou, Jiangsu province, China. Since its inception, Gaxiao has always been committed to the development and research of high volume low velocity ceiling fans. Adhere to the corporate purpose: down to earth, technology-oriented, focus on quality, brand name service!

Usually we call the existence of gas in liquid bubbles. The formation of bubbles can be encountered in many processes in the nature. When the gas is affected by the shear force in the liquid, bubbles of different sizes and shapes will be formed.

At present, the classification and definition of bubbles are not very strict. According to the order from large to small, they can be divided into centimeter bubble (CMB), millimeter bubble (MMB), micron bubble (MB), micro nano bubble (MNB) and nano bubble (NB). The so-called micro nano bubble refers to the bubble with a diameter of about 10 microns to hundreds of nanometers when the bubble occurs. This kind of bubble is between the micro bubble and the nano bubble, which has the physical and chemical characteristics that the conventional bubble does not have.

The air bubble generator is to inject nano bubbles into the dirty water, but it is not these bubbles that really purify the water quality, but the original microorganisms in the water. They are in the nano level, and will not diffuse and disappear after being injected into water, but will gather and integrate into a bubble layer and suspend in water. The microorganisms in water supply create a high oxygen environment suitable for their growth. In the process of growth and reproduction, microorganisms will eat the pollutants in the water as food, so as to purify the water.

The working principle of air bubble generator:

It uses the high-speed rotation of the impeller to form a vacuum area in the water. The air on the liquid surface enters the water through the gas transmission pipe to fill and cut, then the microbubbles are generated, and rise to the water surface spirally, and the oxygen in the air also enters the water. The sewage is fully mixed with the microbubbles produced by the impeller in the process of rising. Due to the imbalance between the gas water mixture and the liquid, a vertical upward buoyancy is generated, bringing the solid suspension to the water surface.

The air bubble generator can make the gas in the sewage dissolve in large quantity and effectively, improve the dissolved oxygen rate, and greatly improve the treatment efficiency and treatment effect. Through its own micro vibration reaction, the ultra-fine nano bubble generator stays in the sewage for a long time, which has the effect of sealing the gas.

About Edon-China Micro Bubble Generator Manufactures

Hello and welcome to Edon pump. We are a manufacturer of micro bubble generator which also called gas liquid mixing pump or DAF pump. Since its interception, our company has been researching, developing and adapting our micro nano bubble generator pumps to make it suitable for different specialty and new application or compatible to different countries' electricity system. From our factory in Shanghai, we can offer you different models of micro bubble generator for your various applications and standby spare parts.

DAF is a kind of air floatation. It uses the different solubility characteristics of water under different pressures to pressurize and aerate all or part of the water to be treated (or treated) to increase the air solubility of water. It is released under normal pressure through the addition of the water with concrete, and the air is separated to form small bubbles, which adhere to the impurity floc particles, resulting that the overall density of floc particles is less than water and began to rise to separate the solid from the liquid.

DAF is suitable for the treatment of water with low turbidity, high chroma, high organic content, low oil content, low surfactant content or rich algae. Compared with other air flotation methods (see Appendix 1 for details), it has the advantages of high hydraulic load and compact tank body. However, its application is limited by its complex process, large power consumption and large noise of air compressor.

1 type according to different classification principles, DAF can be classified differently.

1.1 According to the different pressure at which bubbles are separated from water, they can be divided into two kinds: principles and applications of dissolved air flotation. The former uses the method of vacuumizing to dissolve air under normal pressure or pressure, and then releases microbubbles under negative pressure for air supply floating use; the latter uses the method of forcing air to dissolve in water under pressure, and then suddenly depressurizes to release the dissolved gas from water, adheres to flocs in the form of microbubbles, and floats together.

1.1.1 Although the energy consumption of the vacuum air flotation tank is low, the formation of bubbles and the adhesion between bubbles and flocs are relatively stable; however, the amount of bubbles released is limited; moreover, all equipment components should be sealed in the air flotation tank; the structure of the air flotation tank is complex; it is only suitable for the treatment of wastewater with low pollutant concentration (no more than 300mg / L), so the actual application is not much.

1.1.2 The pressure dissolved air floatation is a commonly used method at home and abroad. There are three basic flow options: full flow dissolved air floatation, partial dissolved air floatation and partial reflux dissolved air floatation.  

1.1.2.1 The whole process dissolved air flotation  The whole process dissolved air flotation is to pressurize all waste water with a water pump, dissolve air in the waste water in the dissolved air tank, and then send the waste water to the air flotation tank through a pressure reducing valve. See Figure 1 for flow chart. Its characteristics are as follows: ① large dissolved air volume increases the contact opportunity between oil particles or suspended particles and bubbles; ② under the same treatment water volume, it is smaller than the air flotation pool required by partial reflux dissolved air flotation. ③ all waste water passes through the pressure pump, and the pressure pump and air dissolving tank required are larger than the other two processes, so the investment and operation power consumption are larger.

1.1.2.2 The partial dissolved air floatation  The partial dissolved air floatation is to take part of the waste water for pressurization and dissolved air, and the rest of the waste water directly enters the air floatation tank and mixes with the dissolved gas waste water in the air floatation tank. Its characteristics are as follows: ① the pressure pump required for the whole process is small, so the power consumption is low; ② the size of the air flotation tank is the same as that of the whole process, but smaller than that of the partial reflux solution.

1.1.2.3 The partial reflux dissolved gas floatation  The partial reflux dissolved gas floatation is to take part of the treated water for reflux, pressurize the return water and dissolve the gas, enter the air floatation tank after decompression, mix and air floatation with the oily wastewater from the flocculation tank. See Figure 2 for the flow chart. Its characteristics are as follows: ① less pressurized water, less power consumption; ② no promotion of emulsification in the process of air flotation; ③less flocculation after the formation of alum,; ④ larger volume of air flotation tank than the first two processes. According to modern air flotation theory, partial reflux pressurized dissolved air flotation can save energy, make full use of flotation (coagulation) agent, and the treatment effect is better than that of full pressurized dissolved air flotation process. At the same time, when the reflux ratio is 50%, the partial reflux (reflux ratio is 50%) pressurized dissolved air flotation process is commonly used at home and abroad.

1.2 According to whether the microbubble sludge layer (bed) in the air flotation tank has filtration effect and different flow patterns of water, it can be divided into early DAF, ordinary DAF and turbulent DAF.

2. Design principal of DAF is generally set in front of biological processing unit and after physical processing unit, and it is usually classified as physical processing unit. If it is set as two-stage flotation, in order to facilitate saving, the first and second stage flotation cells are often arranged in parallel. The first and second stage flotation cells have a liquid level difference of about 500mm to ensure that sewage flows from the first stage flotation cell to the second stage flotation cell, and the lifting pump is canceled to achieve energy saving effect. It is reflected in the vertical layout, that is to say, during design and construction, it is necessary to strictly control the height of the scraper Trailer (plate), the adjustable weir and the top of the slag removal trough, which is very important and is one of the key factors, otherwise it will seriously affect the floatation effect (the foam layer can not be removed by mechanical means). This is the reason why the adjustable effluent weir must be adopted.

About Edon-China Micro Bubble Generator Manufacture

Hello and welcome to Edon pump. We are a manufacturer of micro nano bubble generator which also called gas liquid mixing pump or DAF pump. Since its interception, our company has been researching, developing and adapting our  micro bubble pump to make it suitable for different specialty and new application or compatible to different countries' electricity system. From our factory in Shanghai, we can offer you different models of micro bubble generator for your various applications and standby spare parts.

Solar Hybrid Air Conditioner Working Principle

Cooling capacity 9000BTU/12000BTU/18000BTU/24000BTUInside building digital calculator to priority biggest using DC power, auto balance 220V city grid power.  DC input range is DC50V~DC300V,  so can connect max around 1500W solar PV panel Max consumption 90% solar DC power.

This solar thermal hybrid air conditioner no need battery, install take small place, so for the end user whole system running cost is very low.Meanwhile,the hybrid air conditioner price is affordable,welcome to buy.

When night, it can same as normal inverter air conditioner by city power 220V.

ACDC On-grid solar split air conditioner wall split type, the power from solar panel priority supply directly to indoor&outdoor fan motor and compressor. When the solar power is not sufficient, by equipped with dual PV MPPT tracking system, the system automatically switches to run by grid power, thus achieved the AC/DC power supply interaction, and uninterrupted supply power to air conditioner, ensure the system high efficiency up to SEER36, high quality with 3-5 years warranty, convenient installation, wide voltage design, free combination of solar panels.

The air conditioner directly connects solar PV panel to AC unit by MC4 solar connectors, others like normal split acdc aircon.

The greatest advantage of solar thermal hybrid air conditioner is that people need cooling most when the sun is the heaviest, and the more the solar energy is, the easier collecting a lot of energy and make use of will be.

How can big room your hybrid ac unit heat/cool?

9000btu up to 18 sq.mt

12000btu up to 23 sq.mt

18000btu up to 35 sq.mt

24000btu up to 47 sq.mt

How many solar panels do I need to run your ACDC unit?

ACDC09-----solar PV panel 200W*4PCS

ACDC12-----solar PV panel 250W*4PCS

ACDC18-----solar PV panel 300W*4PCS

ACDC24-----solar PV panel 300W*5PCS

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.

Our SUNCHI New Energy produce 2 types solar powdered air conditioner - DC48V 100% solar air conditioner and ACDC hybrid solar air conditioner. We offer a wide range of air-conditioning products from single units to flexible, solar air conditioning unit  systems. Our split systems come in a range of capacities and combinations to suit domestic and small commercial applications, while our sophisticated VRF-KX series provides heating and cooling solutions for commercial and industrial uses. The use of solar power is eco-friendly and energy-saving.

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.

Industrial High Temperature Heat Pump Overview

Industry 90℃ high temperature air to water heat pump this is newest technology in the air source heat pump line,  by R410A + R134a refrigerant combine inside, using Mitsubishi R410A DC inverter compressor as the first stage and R134a special high temperature compressor as second stage to sure machine working limit -20℃ winter produce outlet 90℃ hot water 245L/h.

Outlet hot water temperature can set from 55℃~90℃ as user requirement, so it is widely using home radiator heating by 65℃, 75℃,85℃or 90℃ hot water for industry heating using --like a factory, textile, printing, and dying, military industry, steam line, ironing, explosive, medicine high-temperature sterilization line.

 What is a high temperature heat pump?

The definition of the high-temperature heat pump is compared with the current market lea    ding air temperature heat pump product with a maximum water temperature below 55 ℃.

1. The temperature of water supply is above 65 ℃.
2. The temperature of the effluent is between 65-75 ℃.
3. The highest temperature can reach 85 degrees Celsius (SUNCHI temperature ultra high-temperature heat pump can reach 90℃.

The heat pump that can meet the above requirements and meet the high-temperature hot water demand of commercial or similar industries in civil or industrial sectors is the high-temperature heat pump.

Equipment characteristics:

1. The flexible scroll type high-temperature compressor;
2. Intelligent digital smart throttle technology;
3. High-temperature superconducting heat system;
4. High-efficiency brazing heat exchanger;
5. PLC precise connection electronic expansion valve;
6. Condensing pressure balance valve;
7. Environmental protection type high-temperature heat carrier;
8. The design is compact and reasonable, with perfect safety protection and low noise.
9. The maximum effluent temperature can reach 90℃, which can meet the needs of different civil or commercial applications.

With the implementation of the national policy of energy saving and emission reduction and the rising of energy prices, the impact of heat and energy conservation in the industrial and commercial field has been increasing. As a kind of energy-saving technology, heat pump technology has unique advantages in saving energy and protecting the environment. However, the economy is not good under the condition of high water temperature, which restricts the popularization and application of ordinary air source heat pump.

The high-temperature air source heat pump technology developed by the SUNCHI New Energy Company is at the historic moment in this context. The water temperature of the SUNCHI high-temperature energy water heater can reach up to 85 ℃, which greatly expands the application range of the ground source heat pump technology.

SUNCHI high temp heat pump mainly uses electricity, but electricity is only used to drive heat pump system to absorb heat from outside environment. And then the heat is released to heat. Unlike conventional electric heaters, which directly use one-degree electricity to form 860 large calories, the experiment proves that the heat from the same one-degree electricity absorbed from outside for the heat pump system is four bits of 860 calories, so the electricity used is only 1/4 of the electric heater.

A simple analogy: a heat pump can use an electric energy to absorb 2-3 free heat from the environment, then use this heat energy for heating, and the electrical energy is also used for heating. The experiment will eventually make the heat efficiency up to 300-500%.

The general heating methods are directly heated by energy, the energy efficiency of the electric heater is 95%, and the natural gas is about 80%. The heat pump water heater uses electricity to drive the compressor, instead of being used directly for heating. The heat comes from the environment.

Saving energy is saving money, it saves the operating cost of 3/4 compared with electric heating and oil furnace; saves 2/3 running cost compared with the gas heater; saves a large labor cost and environmental protection compared with coal. Even if compared with the solar energy, it can save the running cost of 1/3, and use the heat of valley electricity to shift the electricity from the peak periods to off-peak periods, so the run cost is saved again and again.

The scope of application: high temperature heat pump water heater can meet the heating demand of agricultural and sideline products processing industry, beverage processing industry, electroplating dyeing industry, textile printing and dyeing industry, drying industry, bass disinfection, and other industries. It can be used for drying aquatic products, meat products, Chinese medicinal materials, wood, paper products, printing products, incense mosquito repellent incense, tobacco, casings, industrial products and other hot air heating in ceramic production, solidification, and heating of battery production. The highest temperature can achieve 85 degrees centigrade for high-temperature type and 60℃ for the common type.

(SUNCHI GROUP) Jiangsu Sunchi New Energy Co., Ltd. is a scientific and technological innovation-oriented enterprise which is specially engaged in researching, developing, manufacturing and marketing of solar air-conditioner, heat pump and solar water heater. For years, SUNCHI take the concept and objective of 'quality first, service superior' and 'sincere cooperation, green civilization'. Meanwhile, SUNCHI execute ISO9001:2000 strictly and the products have passed many authorized attestations such as: ISO9001:2008, CE, CCC, TUV and SGS. SUNCHI is located in Danyang City Jiangsu Province with convenient transportation and covers an area of over 50,000㎡, and has over 500 employees with annual productivity of 180,000 sets. Take the quality as foundation and client's satisfaction as our aim, keep development and innovation ,work hard in the field of green, safe and energy saving solar energy, and build a brilliant future with you together.

We have air pillow machine for sale!

Introduction Of LA-E3 PLUS High-Speed Air Pillow Machine - Industrial Class

Air Cushion Machine- an industrial class, reliable and on-demand protective packaging system with speed 28m/min. It is great for all void-fill applications, including mail order fulfillment, ecommerce, pharmaceutical, third party logistics, and contract packaging.  with fast speed 28m/min which is deal for high volume packing. LA-E3 Plus Air Cushion Machine use together with Locked Air inflexible integration delivery systems which can support 32 workstations will achieve high packing line efficiency and productivity.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Paper Void Fill Machine, or want to know more about air pillow machines suppliers and products, please contact us!

Introduction Of LA-E3S Multifuction Mini Air Cushion Machine - Business Class

Air Cushion Machine-the most popular entry level machine which can inflate multiple air cushions include air pillow, bubble and tube with speed 8m/min. It is designed for small business, packaging and shipping stores and it supports 800 packages each day. The user-friendly, on-demand inflatable air pillow system fits most spaces and budgets and help to provides excellent protection while reducing material and shipping costs. With the   mini air air cushion system  you can now produce various air cushions thickness range from 13u to 80u as well as wide air cushions width range from 200mm to 800mm.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Air Cushion Packing System, just contact us!

Introduction Of LA-E3S Pro High-Pressure Air Fill Packaging Machine - Business Class

Air Cushion Machine, the evolution for professional starter class bubble machine and on-demand inflatable cushioning systems with speed 8m/min. It is designed for small business, packaging and shipping stores and it supports 800 packages each day. LA-E3S PRO Air Cushion Machine with extra pump which can achieve extremely strong bubble wrap protection. With its features like light weight, easy to operate, durable, flexible and high volume, this air fill packaging machine  can help to build good brand image, enhance the consumer unboxing experience as well as protect parcels during transportation.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Automatic Packing System, just contact us!

Introduction Of LA-F1 Durable & Affordable Bubble Wrap Maker - Business Class

bubble wrap maker - a business class on-demand inflatable  air bubble/tube cushioning systems with speed 18m/min for middle business, packaging and shipping stores. It is great use on bubble wrapping which offers a lightweight, space saving, clean solution and best unboxing experience compared with traditional bubbles to provide excellent product protection in minimal. LA-F1 Air Cushion Machine is designed to pack fast, durable bubble material making. With its optional automatic Winder, you can make versatile type of bubbles onsite.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Paper Void Fill Machine, or want to learn about bubble wrap machine price, please contact us!

 air pillow packaging machine -a business class, reliable and on-demand protective packaging system with speed 18m/min. It is great for all void-fill applications, including mail order fulfillment, ecommerce, pharmaceutical, third party logistics, and contract packaging. A variety of supportive pillow shapes can be produced as required directly at the packing station, and it can be seamlessly integrated into Locked Air long delivery hopper system which can support 32 workstations at most. Therefore you have the best flexibility for your transport protection, with high speed and throughput.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Print And Apply Labeling Systems, just contact us!

Introduction Of   plastic air bubble packaging  

Introduction:

Bubble air cushion -MF series.

Design for wrap protection.

Absorbing the shock with positive pressure air inside.

Replacing the traditional bubble wrap.

Advantages of Locked Air®:

Strong sealing

No air leakage

Positive inside air pressure

High uniformity

We are reliable air bubble bags manufacturer  . BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Paper Void Fill Machine, just contact us!

1. General Information

Regular cleaning including air duct cleaning and ventilation duct cleaning and maintenance can improve the performance of DurkeeSox system and guarantee the good indoor air quality and optimum air dispersion, different air dispersion model and working environment (dust capacity) decide the different period of cleaning and maintenance.

2. Maintenance Period Description

Following is the advised maintenance period of general situation.

2.1 DurkeeSox—EJ 100% Eject without Permeation.

Made of non-porous fabric, and usually installed in higher space, So system cleaning and maintenance requirement is not an immediate concern. According to the different work environment requirements, general we suggest the cleaning period is three to five years.

2.2 DurkeeSox—PE Permeation with Injection

Made of less permeable fabric, most of airflow is distributed through orifices; fabric blockage is not our direct concern. Additional, the system is usually installed in higher space, According to different working status, general advised cleaning period is two to three years.

2.3 DurkeeSox—PS Permeation with Slots

Made of various permeation fabrics, part of air is distributed through fabric, and the system usually installed in lower space, so when it is discovered that fabric is seriously soiled and worked under lower efficiency, or there is obvious dust on the system surface, we need to clean system. According to different working conditions, general advised cleaning period is one to two years. In the cases of extreme dirty, the fabric may happen discolored as the cleaning.

2.4 DurkeeSox—PM 100% Permeation

Usually applications are in refrigerated, cooling system such as food processing, regular and effective maintenance is particular important. If the systems operating in dirty or soiled or long time without maintenance, it may results permeability failure or less life of system, According to the different working conditions, general advised cleaning period is every 3 months to half year is better. When cleaning, take down every part from suspended device, then turn out the dirty surface and washing.

3. DurkeesoxMaintenance Procedures & Instruction

3.1 Remove DurkeeSox fabric ducts.

3.1.1 Firstly plan laundering time, making laundering schedule according to the drawing and jobsite situation.

3.1.2 After confirm the laundering schedule, arrange workers and tools which use for take off ducts. Checking the location and remove procedures of each DurkeeSox fabric duct according to the drawing, remember to mark as correctly for all the ducts to avoid missing remove or installation mistake.

3.1.3 Confirm AHUs turned off and DurkeeSox fabric duct is on the non-work state. Clear away for some sharp objects below or take the proper protection to avoid any potential damage to DurkeeSox fabric air ducts while removing.

3.1.4 Check the location of each zipper connection, from the inlet (The join part between metal ducts with DurkeeSox duct) to turn the zipper cover-up sleeve out and unfasten zipper, then retract fabric duct till to the next zipper unfastened to remove this part together, make the proper marks please! When take down to the end part please loosen the fixed snap clip and remove them together with endcap.

3.1.5 According to the above procedures, remove and wash ducts step by step as the laundering schedule.

3. 2 Laundering Instruction:

3.2.1 Turn the dirty side out, soak in cold water 15 to 30 minutes without any softener;

3.2.2 Cold water washing (water temperature should less than 35℃), do not overexert to wrest.

3.2.3 Rinse thoroughly, and drip-dry or dry by airing in the shade, do not insolate to avoid any crimple or shrinkage by high temperature.

3.2.4 Serious dirty system might needs to clean more than once.

3.2.5 The laundering eligible standard is: surface clean without dusts, the accessories of zipper, hanger, etc are in good condition.

3.2.6 Big project maybe needs separate one maintenance to several laundering times, once finished one part, please carefully inspect and confirm the quantity according to the drawing, avoid missing laundering and losing!

3. 3 Installation after washing.

3.3.1 Indentify all marks or labels of washed ducts according to the drawing.

3.3.2 Find out the DurkeeSox fabric ducts which need to install, hang the snap clip of ducts from the first section to the end section one by one, please to avoid any barrier to clamp snap.

3.3.3 Connected by zipper for each section as the correct order. To make sure all zippers covered by protection sleeve.

3.3.4 Straight the DurkeeSox system after installation and fixed the snap clip to the end part of to avoid fabric duct draw back.

3.3.5 Inspect the whole DurkeeSox system is straight and neat without damaged before starting work.

Remark:

To make laundering schedule do not take influence to owner’s normal working.

2. Please refer to actually situation If any discrepancies between the drawing and actual situation.

3. Please pay attention to ducts labels on the site of each zipper connection.

4. The above methods are applied for the galvanized cable suspension, For the aluminum track suspension model is just slide out & into the end of DurkeeSox system will be ok!

5. We suggest DurkeeSox detergent for exclusive use.

6. For extremely dirty, it would be possible for little color change deepen during the laundering, we suggest to add M-efficiency diffuser or DurkeeSox fabric diffuser

4. DurkeeSox System Storage Method

Please properly storage for DurkeeSox system in case of does not use for a long time to ensure the cleanness and extend the lifecycle of DurkeeSox system.

4.1 After stop using, Firstly to confirm whether the both inside & outside of DurkeeSox is clean, or launder it if necessary. (Please refer to the above laundering method).

4.2 Please remove DurkeeSox system as the procedures above. Please copy the marked drawing and save in the package.

4.3 Please pack & seal the removed ducts in time, and affix to instruction mark for the convenience of future installation.

4.4 Please count record in time to avoid lost after removed & packed DurkeeSox system.

4.5 Please keep DurkeeSox in the dry & ventilation environment. 4.6 Recheck DurkeeSox system before remove & preserve, check whether the surface of DurkeeSox is in good condition.

For any further questions, please call to your local distributor or our service line in China. 86-400-8822-068

Introduction of RW150 Air Jet Looms:

RW150 Air Jet Looms are designed for high speed. The air jet weaving looms can weave high quality fabric with lower cost, to realize the maximization of investment gains, to guarantee winning victory in the keen market competition market competition.

Strong frame structure of RW150 Air Jet Looms:

The robust frame structure of the air jet looms mainly composed of a strong box frame on both sides and beams, intermediate rocking supporters, which parts of the air jet weaving looms ensure the stable running and vibration resistance, also they ensure low noise and less vibration even at high speed on the wide loom.

Optimum designed link beating motion:

A 4-link beating motion that works excellently at ultra-high speed and a short connecting rod are used for standard air jet weaving looms. A 6-link beating motion with more time allowance for filling insertion is used for wider air jet looms, thus achieving more stable filling insertion.

Driving, rush start motor:

The rush start system of the air jet looms delivers high-power torque at starting, enabling increased beating power for first pick, eliminating stop marks, and contributing to high quality production.

Parameters of RW150 Air Jet Looms:

Reed space: 150

Weavable range: Spun: Ne 100 – Ne 2.5; Filament: 56dtex-1350dtex

Filling selection: 1-color, 2-color mixing; 2-color at-will; 4 colors; 6 colors

Filling insertion: Main and sub-nozzles combined system, auxiliary main nozzle; New solenoid value with built-in manifolds; Independent sub-nozzle timing control by color; AJC Auto Jet Controller: First pick control

Let-off: Electronic let-off

Take-up: Electronic Take-up

Beating: Crank type beating, multiple sley sword beating

Measuring & storage: Brushless DC motor weft accumulator

Filling supply stand: Floor mounted for 4 packages (2 colors), Floor mounted for 8 package (4 colors)

Selvage: Planetary gear motion

Waste filling remove: Catch cord type (3-roll type), catch cord type (Gear type)

Cutter: Mechanical cutter

Lubrication: Oil bath system for main driving parts, centralized lubrication (Manual grease)

Stop motion: Reactive weft feeler

Automation: Data setting, automatic control, monitoring, self-diagnosis function

We have air jet loom for sale! WSF is a company which is outstanding in providing various solutions of winding machine for clients. We are one of the most professional thread winding machine manufacturers in China. Just contact us!

The innovative conception of the Micro Air Bubble Generator did lead to participation at seventh frame programming of the EC for research and technological development. Marine bio-fouling is major problem for material in constant contact with seawater. Accumulation of marine organisms has impact on the proper functioning of engines and further appliances on board that need constant and proper cooling, and on the safety of the vessels.

In the processing of regenerative energy carriers like biofuel, wood, waste fraction with high heat value, or animal meal to synthetic gas, the carbon dioxide has to be removed. The gas is forwarded by a compressor to an absorption cell, where it flows up through a support medium aggregate. This aggregate is being sprayed from above with water that is conveyed by a micro air bubble generator. During this process, the water is enriched with CO2 out of the synthesis gas. Afterwards the water is led into a desorption tank, in which most of the CO2 will out gas.

We have micro bubble generator for sale! To learn more about microbubble generator price, Just contact us!

ANBIT's Drilling Jumbo and Bolting rig is widely used in underground mining, tunnel construction, providing multi-angle drilling. The rich accessories ensure the smooth progress of the work. The low energy consumption air compressor station provides strong power.

Tunnel is a key project in highway and railway construction. Tunnel excavation methods have developed rapidly. Drilling and blasting method has strong adaptability to geological conditions and low excavation cost. It is especially suitable for the construction of hard rock tunnel, broken rock tunnel and a large number of short tunnels.

Therefore, drilling and blasting method is the most commonly used tunnel excavation method in the world. In drilling and blasting, it is necessary to drill holes in rocks for the purpose of landfilling explosives. ABT underground trolley improves construction efficiency and provides multi-angle drilling service in tunnel construction. Rich accessories ensure the smooth progress of the work. Low energy consumption jumbo air compressor stations provide a surging power.

It is necessary to drill steel anchor cables into the tunnel wall to enhance the tension of the building in order to prevent the formation changes from causing huge losses in the construction process of the construction tunnel. In the construction of deep foundation pits in buildings, drilling and drainage are needed, and anchoring holes are drilled to prevent foundation displacement. Landslide caused by falling debris and rainwater scouring on the side of highway has caused great accidents. The most effective way to solve this problem is to use bolt drill as slope support. ABT drilling equipment supplier provides a complete set of bolt drills to help meet this demand.

You will use: mobile air compressor, drill rig, drill bit, hammer, drill rod