Introduction to the Application of Wire Drawing Machine
Wire drawing machine is also known as wire drawing bench, which is used a wide range of mechanical equipment in industrial applications.
Wire drawing machine system is a very high demand for speed control equipment, the control system can provide very accurate, smooth linear velocity. While gold wire drawing machine has higher request than ordinary wire drawing machine. The whole system is complex, it needs more demanding coordination between the motor.
The system uses 4 sets of servo motor control and has the real time data exchange between each servo, Kinco’s communication ability can completely satisfy the various data real-time interaction between the shaft.
System needs more quick data between the interaction of the motor shaft, in order to ensure the wire line can be calculated in accordance with the requirements of the algorithms track wire in place side by side, and also make full use of the function of internal firmware kinco servo, through the calculation of drive themselves, to drive motor wire, omitted the traditional drawing machine control system is calculated by the controller position of silk and then transmitted to the drive caused by time delay, affirmed the wire delay minimization.
Each Component Function of Wire Drawing Machine
Screw: screw extruder is one of the most important components, is directly related to squeeze molding machine and the application scope of productivity. PP screw generally divided into three sections, delivery period, the material cannot but to pre heat in plasticizing, its main function is the transmission. Followed by compression section, the screw groove by gradually decreases, and the temperature to achieve the plasticizing degree, in order to complete the plasticization. Final is the material plasticizing metering section, in addition, the material keeps plasticizing temperature, conveying material and with a certain amount, in order to supply the nose, also cannot under plasticizing temperature.
Screw tubes: the main implementation with the screw, realize the plastic softening, plasticizing to get sufficient heat and plastic into a principle.
Die-head: The role of die-head rotation movement of the plastic melt into a parallel straight line, and give necessary to plastic molding pressure, plastic plasticizing compaction in the barrel, the filter in a passage through the membrane into the head, neck through the diaphragm to shape.
TJK is the largest manufacturer in reinforcing steel and wire processing machinery in China.
