Blogs/News/PSAs

Define of 6 Section Boom Concrete Pump Truck

The six section pump truck, as the name implies, is a product type of the pump truck. With the help of six steel arms, it creatively USES bionics technology to integrate the mechanism of human hand movement and insect foot movement into the design of concrete pump truck pump frame. It combines finite element, dynamic simulation and other advanced design methods.

Advantage of 6 Section Boom Concrete Pump Truck

The six section technology greatly improves the utilization rate and flexibility of the arms frame. Compared with the five section boom, under the same length, the effective placing height is increased by 15%, and the effective placing range is increased by 20%. Meanwhile, based on the bionics design, the initial boom is long and end boom is short. The opening space is smaller, and the booms frame is more flexible. For example: At the same height of 50M, the real casting height of six section boom is more than 4M higher than that of five section boom. the 50M six booms =54M five booms. The pump truck has a higher cost performance.

1. Structure

The pump truck adopts three-level telescopic X leg, with innovative use of sprocket + tied oil cylinder of the supporting leg drive mode. It solved the X - type leg three - level stretching technical problem. By adopting the structure of six arms, the effective height of placing can be increased. Equipped with the function of unilateral support, it can satisfy different requirements from the construction site.

2. Pumping of hydraulic pressure

The pump truck adopts the super-large square volume pumping system, and the maximum theoretical square volume can reach 200 square meters/h. The pump square volume can reach 140 square meters/h even if it adopts high pressure. This 200/140 pump unit is configured as the highest level of pump square volume of domestic pump trucks. It adopts full-automatic high-low voltage switching technology, which enables the operation of high-low voltage switching to be completed as soon as the electric control button is pressed gently. There is no need to dismantle the pipe. It is without any leakage. And the blocked pipe can be removed quickly. What’s more, the use of the latest quick change pump oil cylinder, can greatly save the time of replacing concrete piston.

3. Electronic control

For the first time, it adopts a duplex remote control with feedback display. The remote control can display a lot of pump working data in real time screen. After combining the functions of the remote control and electric high and low voltage, the machine operator can clearly see the working status. It is more convenient for the operators to timely understand the operating parameters of the pump truck, and to better complete various tasks.

When selecting a concrete pump truck, we think about our authentic development needs. The longer the dimension of the concrete pump truck boom,the longer distance and the higher peak the material can be transported to. However, if it is used for concrete construction in some narrow building site, the long boom can also not be a right thing. The long arm will not only cause value waste, but additionally make the concrete pump truck unable to be deployed in such a construction site. Therefore, in the true manufacturing process, we should consider our constructing conditions, practicality, economy, safety, maintainability, In different respects, pick out a pump truck with the appropriate concrete pump truck dimensions. We must pick out concrete pump in accordance to the local establishing and therental market conditions. Teila supplies pump trucks with a range of boom sections, consisting of four sections, 5 sections and 6 sections.

Teila is committed to providing the most valuable products and services since it was established. In order to meet the needs of clients in concrete machinery, Teila works hard to build vigorous industrial chain and ecological chain. If you want to know more details or want a quotation, just feel free to contact us!

Bitumen emulsion is mainly composed of the following five main materials: bitumen, water, emulsifier, acid, and modifier. In order to store stability or to satisfy other special uses, a small amount of additives will be added. Metong is the best bitumen emulsion plant manufacturers. Here we provide the professional bitumen emulsion solution.

The manufacturing process of bitumen emulsion can be divided into the following four processes: bitumen preparation, soap preparation, bitumen emulsion, and emulsion storage.

1. Bitumen Preparation

Bitumen is the major component of emulsified bitumen, which account for 50% to 65% of the total mass of emulsified bitumen in general. After spraying or mixing the emulsified bitumen, it is going to demulsify. Then the moisture is evaporated. And what remains on the road surface is the bitumen. Therefore, the preparation of bitumen is critical.

Choosing suitable brand and label of bitumen according to the use of emulsified bitumen. The preparation process of bitumen is mainly the process of heating and keeping the bitumen at the appropriate temperature.

During the process of bitumen preparation, the temperature control is very important. If the temperature of bitumen is too low, which will cause the bitumen to be sticky and the flow to be difficult. Thus it will also cause the emulsification to be difficult. If the temperature is too high, on the one hand, it will cause the bitumen aging. On the other hand, the temperature of the emulsified bitumen will be too high, which will affect the stability of the emulsifier and the quality of the emulsified bitumen.

2. Soap Preparation

According to the different emulsified bitumen, choose suitable  type and dosage of emulsifier and additives to prepare emulsifier aqueous solution (soap liquid).

According to the different types of emulsified bitumen equipment and emulsifier, the manufacturing process of emulsifier aqueous solution (soap liquid) is also different. For the automatic continuous emulsified bitumen production equipment, each component of the soap liquid (water, acid, emulsifier, etc.) is automatically completed by the program which is set up by the production equipment itself. As long as the supply of each material is guaranteed, all these processes can be realized; for semi continuous type or intermittent type production equipment, the soap liquid should be manually prepared according to the formula requirements. Some emulsifier water solution needs to add acid to adjust pH value. Some (such as quaternary ammonium salt) do not need. Some solid emulsifiers at room temperature need to be heated and melted before preparing the soap liquid. Because the temperature of soap liquid is generally controlled between 55 and 75 degrees Celsius before entering the emulsification equipment

3. Bitumen Emulsion

Put the rational preparation of bitumen and soap into the emulsifying machine together. After the mechanical action of pressurization, shearing and grinding, the bitumen will become uniform and fine particles. These particles will disperse evenly in the soap liquid and form bitumen emulsion. The appropriate temperature of emulsified bitumen should be around 85  degrees Celsius.

4. Emulsion Storage

The emulsified bitumen comes out of the emulsifying machine and enters the storage tank after cooling. Mixing device shall be installed in a storage tank and be used to mix regularly. Because it can help to slow down the segregation of emulsified bitumen.

We are one of the most professional bitumen emulsion plant manufacturers in China. Just contact us!

As one of the most electric stacker suppliers in China, we are professional Semi-electric stacker CDD1016BA supplier and factory in China.We can produce the product according to your requirements and provide articulated forklift for sale.

Semi-electric stacker Features

1. High quality hydraulic pump station and seal ring

2.Heavy-duty mast material

Semi-electric Stacker CDD1016BA Parameters

concrete boom pump truck

Product description of Used Putzmeister Concrete Pump 738:

1. Putzmeister 36 meter concrete pump, UD chassis (belongs to Nissan, 3 axle x-leg, 4 booms, high working stability.
2. The manufacture Date is August of the year 2007.
3. Working condition and regular work. Equipment evaluation and maintenance.
4. Remanufacturing will be carried out to ensure that every product is in good condition and that there must be no faults to the product when leaving the factory so as to reduce the working pressure and cost of customers.

A used Putzmeister concrete boom pump is a machine which uses the pressure to transfer the concrete continuously along the pipeline. It is composed of pump body and conveying pipe. According to the structure form, it is divided into piston type, squeeze type and hydraulic diaphragm type. The pump body is mounted on the chassis. Equipped with retractable or folded placing booms, the pump truck is constituted.

The used Putzmeister pumps are modified on the chassis of the truck. It is installed on the chassis with power transmission device, pumping and mixing device, placing the device and other auxiliary devices. The power of the engine is transferred to the hydraulic pump unit or rear axle through the power box, and the hydraulic pump pushes the piston to drive the concrete pump. Then, the concrete can be transported to a certain height and distance by placing booms and pipe.

We have various high lift pallet truck for sale!

HAND PALLET TRUCK JF

Ideal design with numerous possibilities makes this unit very suitable as pallet truck/scissor lift table.Telescopic jack composes of 3 piston rods creating light pumping force giving great rigidity.Support legs come into operation automatically.

HAND PALLET TRUCK JF7

The manual high lift pallet truck offers the user an efficient and versatile tool for material handling. Conform to EN 1757-1-4. Quick-lift operation; Easy maneuvering of loads throughout work place; Great stability; Improved safety.

HAND PALLET TRUCK JFD8

Stainless Steel High-Lift Pallet Truck with Double Pistons; Electric high lift pallet truck; Valuable material handling equipment for use as a feeling table on assembly line; Structural heavy duty steel construction; Hand operated table descent control.

Product Features

1. The appearance of new concept design methods, body side has a clear line in folding,the direction of the line is clever,

smooth transition to the counterweight, same between line and line, having a strong visual tension.

2. The vehicle appearance compact, concise appearance, exposed parts adopt environmental protection of metal material,solid and reliable.
3. Drive motor adopts international advanced parallel arrangement method,battery sink to the bottom frame, excellent stability.
4. A new large screen LED instrument, visibility, reading intuitive, friendly human-computer interaction interface.
5. Silent, no pollution, energy saving, environment protection .
6. Using smooth CURTIS integrated controller in order to promote walking and control precision, good performance of speed adjustment,

motor electronic control matching performance is good, with regenerative braking, reverse connect braking, rapm fall prevention, and other functions, safe and reliable .

7. Motor controller, contactor, power plug, emergency power switch, instrucment panel, accelerator and other major electrical components use international famous brand parts for forklift .
8. All models adopt stable eletric integraged control system, achieves better efftect for water-proof,mold-proof, anti-condensation . Be able to insure safety between -40degree - 35 degree.
9. Solid tires, more safe and reliable .
10. Narrow aisle articulted battery forklift can operate freely in the narrow aisle of 1.8m

ASSISTANT Articulated forklift is a high-performance multi-function; multi-directional electric forklift; equipped with large AC motor; suitable for multi-shift; high frequency; high strength; high efficiency environmen; equipped with smaller DC motor; Suitable for working in low frequency environments

If working in high duty environment; ASSISTANT multifunction- multidirection electric forklift truck is a good choice.

Light-thin integrated design, concise APP cloud control, stable performance, easy maintenance.

Not only a mobile screen, but also an interactive new media.

The weakness of outdoor advertising media market combined with government remediation forces a lot of traditional outdoor advertising forms (such as big billboard, cabinet, wall advertising, etc.) quickly to stay out of the market.

Without attaching to the public buildings and public facilities, truck mounted led screen gets rid of space restraint, becoming the best outdoor advertising new media.

YDEA is committed to providing customers with the best led display control for the professional companies.

Product Description of 56m Concrete Pump Zoomlion

ZLJ5440THBK 56X-6RZ

• Compact in design, the 56m pump mounted on the 4-axle truck, total weight is within the limit of the truckload.
• Efficient pump unit: consist of 2 Rexroth 180 main pumps, which generates 90 bar pressure on concrete with the smooth flow of 180m3/h.
• Agile placing boom with 6 arms gives a wide work range.
• The controller is designed for heavy-duty use, with a monitor, it monitors the concrete pumping equipment intelligently on working data management, real-time diagnostics, alarm logging, and service interval notice.
• Rich in configurations and high-quality components.

Technical Parameter of  Zoomlion 56m Concrete Pump

Concrete pump is a kind of concrete transportation tool that is commonly used in many construction units. It can greatly improve the efficiency of the project and shorten the construction period of the project. However, during the construction process, not many people understand the rules of operation of concrete pumps very well. Feeding is a very important part of it, and it should not be ignored.

So how do you feed the concrete zoomlion pump?

In the pumping process of the concrete pump, in order to ensure the smooth progress of the pumping, it must be carried out according to the factory operating instructions. As an important process in the construction, feeding is along with the entire pumping process of the project. How should the concrete pump be fed in the pumping? Specifically, the following rules can be followed:

In order to ensure the smooth progress of the project, usually in the process of pumping concrete, the concrete pump hopper should be provided with a separate screen, so as to avoid clogging at the inlet and outlet. At the same time, special personnel should be set to monitor the feeding during the whole feeding process, which can directly avoid the blockage caused by the excessively large aggregate or foreign matter entering.

What is a Container Semi-Trailer? 

Container semi-trailer refers to a specialized transport vehicle with a special structure, equipped with a frame type platform and a rotary clamp device on the cargo platform for transporting containers. The container carrier truck for sale is a kind of cargo transportation mode with various varieties, different shapes and different sizes packed into a special-sized and special-purpose box before transportation to facilitate multimodal transport. It can realize the mechanization and standardization of loading and unloading in transportation. Because of the good maneuverability, the larger cargo platform which is suitable for "segment transportation", "drop & pull transport" and "roll on roll off" transportation, container semi-trailer is widely used in most countries in the world. If you need to buy Container Semi Trailer, Ultraton Container Trailer is your best choice! 

How to choose a Container Semi Trailer? 

According to the structural characteristics, it can be divided into Flatbed Semi Trailer and Skeleton Semi Trailer. The former has a bottom plate (cargo platform) and can also be used to transport ordinary goods. The latter has no bottom plate and can only be used for transporting containers. Current standard containers are available in standard sizes of 20 ft, 40 ft, 45 ft, and 48 ft (The world's uniform ISO standard). Most of the container semi-trailers currently in use are standardized general-purpose products, such as 20, 40, 45, 48-foot fixed-length skeleton container semi-trailers. Ultraton commercial trailer manufacturers has rich experience and skilled technique. The frame of the fixed-length container semi-trailer is a space frame welded structure, which is formed by welding two I-shaped longitudinal beams and a plurality of beams (C-shaped channel steel). The front part of the front frame is connected with the semi-trailer King pin and Fifth wheel. The container is directly placed on the semi-trailer frame, and the container is fixed and locked with a twist lock device equipped on beam end. 

Trust us and contact us!

Zoomlion 52 meters concrete pump, Isuzu chassis.

Manufacture Date is September of the year 2013.

Used condition and normal working. Equipment evaluation and Restorative maintenance.

Intelligent security, derived from Europe's mature bionic 6RZ boom system. The first configuration comes from the CIFA k-tronic intelligent security cloth technology pump. The key parts are the original components of international first-class brands, and the most rigorous and rigorous production process and testing process are adopted to ensure the high quality of each zoomlion concrete pump china.

Matters needing attention in the selection of concrete pump truck

The volume of the construction business

The quantity of used boom pumps can be calculated according to the quantity of commodity concrete pouring, the actual quantity of conveyance of the single machine and the time of construction. For those commercial concrete pumping construction projects with a large amount of one-time concrete, it is advisable to have a certain amount of reserve in addition to being determined according to the calculation. In addition, the commercial concrete business concrete station with the annual output of 10~ 150 thousand m3 shall be equipped with 2~3 commodity concrete gantry pump trucks.

Product configuration

In the selection of product performance of concrete arm used pump trucks, the high starting point should be adhered to. If high-value concrete upper arm pump truck is selected, the standard of its products must be improved. The quality of the main components of the product, both internal quality and external quality, should be adapted to the high value of the whole vehicle.

Power system

Concrete frame pump truck adopts the full hydraulic technology. So it is necessary to consider whether the hydraulic technology used is advanced or not, and how the quality of hydraulic components. Because its power comes from the engine, so besides engine performance and quality, the performance of automobile chassis, bearing capacity and quality should also be considered.

The operating system

The operation control system of commodity concrete arm pump is provided with manual, wired and wireless control modes. Wired control is convenient and flexible, wireless remote control can be operated remotely. Once the circuit fails, the manual operation mode can be adopted.

After-sales service

As a special vehicle, the concrete arm pump truck should be required for its safety, mechanical performance, after-sale service, and parts supply. Otherwise, once the accident occurs, it not only affects the construction schedule but also will produce the unimaginable consequence.

Our own number: 557

Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.

Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.

Comprehensive maintenance, direct to the construction site.

Overview of used sany concrete pump:

Five-section RZ arm frame, the fabric is flexible.

X-shape outrigger, single side support, suitable for narrow site construction.

The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.

Computer energy saving control, automatic power matching, the average energy saving is 20%.

The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.

The new control system is free to upgrade automatically.

The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.

Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.

Safety precautions of Used Sany 46 Meters Concrete Pump

1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.
2. the Sany concrete pumptruck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.
3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.
4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.
5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.
6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.
7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.
8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.

sany concrete pumps for sale, RFQ today!

Product description of Used Putzmeister Concrete Pump 738:

1. Putzmeister 36 meter concrete pump, UD chassis (belongs to Nissan, 3 axle x-leg, 4 booms, high working stability.
2. The manufacture Date is August of the year 2007.
3. Working condition and regular work. Equipment evaluation and maintenance.
4. Remanufacturing will be carried out to ensure that every product is in good condition and that there must be no faults to the product when leaving the factory so as to reduce the working pressure and cost of customers.

A putzmeister used concrete pumps is a machine which uses the pressure to transfer the concrete continuously along the pipeline. It is composed of pump body and conveying pipe. According to the structure form, it is divided into piston type, squeeze type and hydraulic diaphragm type. The pump body is mounted on the chassis. Equipped with retractable or folded placing booms, the pump truck is constituted.

The used Putzmeister pumps are modified on the chassis of the truck. It is installed on the chassis with power transmission device, pumping and mixing device, placing the device and other auxiliary devices. The power of the engine is transferred to the hydraulic pump unit or rear axle through the power box, and the hydraulic pump pushes the piston to drive the concrete pump. Then, the concrete can be transported to a certain height and distance by placing booms and pipe.

We have used putzmeister pumps for sale, RFQ today!

It is a common fact that we find a wide variety of concrete machines on every construction sites, which make the construction jobs easy, safe and quick. Used concrete equipment has the characteristics of high cost performance. Low risk, low investment cost, high returns. Engineers have a strict review mechanism for the source and control of the used concrete line pumps truck, inspecting more than 500 items and filling in the first inspection list. Used pump truck that meets the Teila review standard can be repaired in the factory. Ensure zero failure before it leaving the factory and can work directly. Used concrete boom pumps have the characteristics of low risk, small investment cost, and high returns.

used concrete line pumps for sale! RFQ

Flatbed Semi-Trailer has a bottom plate (cargo platform) and can also be widely used to transport ordinary goods. The flat type bearing surface is large and the strength is high, but the frame has a high center of gravity and high requirements on the road. Low bed truck trailer is a good solution to this. The concave beam-type frame has a low center of gravity. The goose neck has the advantages of both and can take into account both the road and the center of gravity to ensure better stability and safety, and the greater ability to transport super-tall loads and to pass overhead obstacles.

It could be effectively applied on transport tractors, buses, special purpose vehicles, rail vehicles, mining machinery, forestry machinery, military machinery and other heavily loaded goods. What kinds of Low Bed Semi Trailer are available? Generally we can customize models on your need ranging from 25T to 150T. Divided by size, there are 9.1 meters, 9.5 meters, 10.5 meters, 11 meters, 12 meters, 12.5 meters, 13 meters, 13.75 meters Low Bed Semi Trailer, width 2.8 meters-3 meters. Divided by axle style, it could be equipped with two-axle, three-axle, two lines four axles, three lines six axles. This Low Bed Semi Trailer is very suitable for large equipment such as machinery, excavators, bulldozers, etc. It can be ranged from 30 tons, 60 tons, 80 tons, 100 tons, 120 tons, to even 300 tons. On different purpose or weight of goods, Low Bed Semi Trailer could be modified into type with removable goose neck, extendable ramp, and even modified to be hydraulic modular transporter, SPMT ( Self Propelled Modular Trailer) by equipped with hydraulic pendulum axle, cantilever suspension, driven modules, power pack unit to ensure the smoothness of transportation and to enhance its greatest performance.

Welcome discussion on the distributor, sole agent, and project cooperation.

Hope ULTRATON truck trailer manufacturers can help you build up and develop business greater.

Semi End dump Trailer is the most widely used in heavy-duty Semi Dump Trailer. The cylinder is usually a front-mounted direct push type. The hydraulic cylinder directly lifts the cargo box and dumps it. The stability of the whole vehicle is good and the pressure of the hydraulic system is relatively small. Therefore, the tonnage can be lifted up, the reliability is high, and the service life is long. If you need to transport sand, stone, coal, soil, garbage, bulk goods that are bulky in short distance, end dump truck and trailer
could be an ideal choice. In practical applications, in order to meet the needs of users, there are 9-meter container flat-panel Semi End Dump Trailer, 8-meter flat-panel Semi End Dump Trailer, 7.7-meter flat-panel Semi End Dump Trailer, Skeleton Semi End Dump Trailer, etc. coming up on the market.

In order to prevent the lifting process from overturning, the design reduces the center of gravity to 1.3-1.4 meters, which increases stability during transportation and reduces damage to tires, leaf springs and frames. The frame is made of durable 16-manganese plate, which greatly increases the load-bearing strength. The rear panel of the compartment is locked with mechanical means. When unloading, the lock hook and the rear panel are automatically opened to avoid blockage during unloading, especially when the stone is unloaded, the rear panel is not hit, and the damage to the vehicle is reduced. The three-axle balanced design is equipped with a mass balance block between the front and rear leaf springs, which can change the disturbance of the front and rear leaf springs to equalize the force of the front and rear axles. The Semi End Dump Trailer is suitable for cargo with a large rest angle. It is important to note that the Semi End Dump Trailer cannot be more than 12m long. Any truck longer than that may be dangerous.

Welcome discussion on the distributor, sole agent, and project cooperation.

Hope ULTRATON truck trailer manufacturers can help you build up and develop business greater.

Advanced and exquisite maintenance and remanufacture technology. Maintenance and remanufacture technology leads the industry. Teila Remanufacture has introduced the industry-leading standard system of "one, two, three, four and five level", strictly in accordance with standard procedures for maintenance and inspection, implementing the process operation, standardizing the management, to ensure customers feel comfortable to purchase and use. What is re-manufacturing? Re-manufacturing is guided by the product life cycle theory, and in order to achieve the goal of improving the performance of waste products, in accordance with the principles of high quality and high efficient, energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the refurbished pumps (remanufactured) and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Construction equipment re-manufacturing is not a simple repair, we can think the re-manufacturing as the highest stage of the repairing. The common repair is where it breaks, we fix it. But the re-manufacturing is a serial activity of repairing with the high technology and industrialized production. Frankly speaking, Teila dismantles the pump and then according to the standard of re-manufacturing, repairs, assembles and debugs it.

Refurbished Concrete Pumps (remanufactured) products:

What is refurbishing? Refurbishing is guided by the product whole life cycle theory, and in order to realize the waste product performance improvement as the goal, with the rule of high quality and high efficient ,energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the equipment and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Concrete pump refurbishing is not a simple repair, we can think the refurbishing as the highest stage of the repairing. The common repair is where is broken, repair it. But the refurbishing is a serial activity of repairing with the high technology and industrialized production. Teila dismantles the concrete pump and then repair, assemble and debug it according to the standard of refurbishing.

We have concrete boom pump for sale, RFQ today!

Define of 6 Section Boom Concrete Pump Truck

The six section pump truck, as the name implies, is a product type of the pump truck. With the help of six steel arms, it creatively USES bionics technology to integrate the mechanism of human hand movement and insect foot movement into the design of concrete pump truck pump frame. It combines finite element, dynamic simulation and other advanced design methods.

Advantage of 6 Section Boom Concrete Pump Truck

The six section technology greatly improves the utilization rate and flexibility of the arms frame. Compared with the five section boom, under the same length, the effective placing height is increased by 15%, and the effective placing range is increased by 20%. Meanwhile, based on the bionics design, the initial boom is long and end boom is short. The opening space is smaller, and the booms frame is more flexible. For example: At the same height of 50M, the real casting height of six section boom is more than 4M higher than that of five section boom. the 50M six booms =54M five booms. The pump truck has a higher cost performance.

1. Structure

The pump truck adopts three-level telescopic X leg, with innovative use of sprocket + tied oil cylinder of the supporting leg drive mode. It solved the X - type leg three - level stretching technical problem. By adopting the structure of six arms, the effective height of placing can be increased. Equipped with the function of unilateral support, it can satisfy different requirements from the construction site.

2. Pumping of hydraulic pressure

The pump truck adopts the super-large square volume pumping system, and the maximum theoretical square volume can reach 200 square meters/h. The pump square volume can reach 140 square meters/h even if it adopts high pressure. This 200/140 pump unit is configured as the highest level of pump square volume of domestic pump trucks. It adopts full-automatic high-low voltage switching technology, which enables the operation of high-low voltage switching to be completed as soon as the electric control button is pressed gently. There is no need to dismantle the pipe. It is without any leakage. And the blocked pipe can be removed quickly. What’s more, the use of the latest quick change pump oil cylinder, can greatly save the time of replacing concrete piston.

3. Electronic control

For the first time, it adopts a duplex remote control with feedback display. The remote control can display a lot of pump working data in real time screen. After combining the functions of the remote control and electric high and low voltage, the machine operator can clearly see the working status. It is more convenient for the operators to timely understand the operating parameters of the pump truck, and to better complete various tasks.

When selecting a concrete pump truck, we think about our authentic development needs. The longer the dimension of the concrete pump truck boom,the longer distance and the higher peak the material can be transported to. However, if it is used for concrete construction in some narrow building site, the long boom can also not be a right thing. The long arm will not only cause value waste, but additionally make the concrete pump truck unable to be deployed in such a construction site. Therefore, in the true manufacturing process, we should consider our constructing conditions, practicality, economy, safety, maintainability, In different respects, pick out a pump truck with the appropriate concrete pump truck dimensions. We must pick out concrete pump in accordance to the local establishing and therental market conditions. Teila supplies pump trucks with a range of boom sections, consisting of four sections, 5 sections and 6 sections.

1. Putzmeister 42 meters concrete pump, Volvo chassis, 4 axle x-leg, classical 4 booms, high working stability.
2. Manufacture Date is November of the year 2005.
3. Maintenance completed new tires of the complete machine. Hopper maintenance; Finishing lubrication pipeline, circuit, and hydraulic circuit. Whole line arrangement, old pipe and line changed, pressure debugging for 8 hrs and in very excellent condition.
4. Import quality, trustworthy. No formalities and higher cost performance.
5. The first class of machine and make sure each of everything is in good condition, must zero fault when leaving the factory, reduce working pressure and cost from clients.

Only with the stable lower plate is the pump truck safe. The arm-frame pump truck supporting leg should be paid much attention.

Just like kung fu, if your "lower plate" is not strong enough, you can easily be pushed down. Whether putzmeister second hand pump trucks' legs can firmly "plunge" on the ground, is the priority of the safe operation of the arm gantry pump truck.

1. Protect yourself and others from dangerous areas

When opening or closing the leg of the gantry Putzmeister stationary concrete pump, the rotation range is a dangerous area. People may be hurt in the range. When carrying out this operation, you should be careful of yourself and the people nearby.

2. To strengthen of the overlapping location is great. The supporting legs should be extended in place.

The legs of the arm pump truck all have fixed strengthening positions. Only when the legs are opened and extended in place can these strengthening positions give full play to the strength. Otherwise, the supporting legs will be in danger of breaking. Pay attention to the arrows on the legs and ears as you extend them.

3. Communicate with construction personnel in advance and don't "step on empty"

The gantry pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area. In addition, communicate with the person familiar with the construction site before supporting the leg, and make sure the leg is not above the sewer.

4. Keep a safe distance to prevent ground collapse

Adequate safety distance should be set aside to prevent ground collapse when support is near a pit or ramp.

5. The arm pump truck must be leveled and must not exceed 3 degrees

After the support is completed, make sure that the maximum horizontal deflection of the gantry Putzmeister truck mounted concrete pump is no more than 3 degrees. Generally speaking, the direction of the extension of the arm frame will be raised higher during the construction process, leaving a surplus for the subsidence after the extension of the arm frame. Currently, the arm mounted pump truck is usually equipped with an electronic level and alarm device. Once the arm mounted pump truck tilts too high, the alarm will sound to remind the operator. Before extending the armrest, make sure the legs are properly attached.

6. Remote control ensures the safety. Do not be too high from the ground

Upon confirmation of all the leg under the condition of reliable and efficient, make confirmation on the leg safety with the first and second boom. The specific approach is to stretch one arm frame, making the open Angle at 90 degrees. Then let two booms in one meter off the ground. Move one arm up and down in the position of four legs, check whether the corresponding arm bracket and diagonal arm bracket are safe.

7. If water enters under the leg, the arm shall be returned for safety

In case of the occurrence of rain water, oil cylinder leakage of supporting legs and factors reducing the stability of supporting legs, the arm shelf should be closed immediately. After the problem is eliminated, the supporting legs should be put up again according to the requirements.

In addition, when supporting the arm pump truck, it is better to keep the tire off the ground by 5 cm or so. Otherwise, the swing of the s swing tube of the arm pump vehicle and the shaking of the vehicle caused by the impact of pressure in the tube will damage the vehicle driving mechanism.

With the rise of modern industry, the construction method of concrete as the main material has become one of the main constructions in the construction industry, It takes up a large proportion in all kinds of engineering construction, this makes the development of concrete machinery durable, and there is a growing situation. Used concrete trailer pumps referred to as "trailer pumps", it is one of the various concrete machines, used for conveying and pouring in concrete construction.

Trailer Pump Products:

Generally, a concrete delivery pump has the following main technical parameters: delivery capacity, outlet pressure, power, and distribution valve form. In terms of power type, used concrete trailer is generally divided into diesel trailer pumps and motor trailer pumps. In terms of hopper allocation, trailer pumps are generally divided into S valve, Ram valve, C valve.

Classification selection 37kW (domestic minimum standard concrete pump, under 37kW is fine stone mortar pump), 45kW, 55kW, 75kW, 90kW, 110kW, 130kW (diesel), 132 kW, 162kW (diesel), 174kW (diesel)......

Trailer pump is manufactured by electric, diesel and ultra-high pressure for your use on sites. The trailer Mounted Pumps prove their worth and superior performance in various applications, e.g. operate well at -22°C in Moscow, 55°C in Dubai, 12h continuous pumping and pump of difficult concrete like B90, C150, and 3-gradation concrete. 5 core pump technologies provide you with the best trailer pump. Trailer pump has high pumping efficiency, long service life, simple operation, efficient energy saving, cutting-edge technology, trustworthy!

trailer pump for sale! RFQ today!

Since Hunan Teila Heavy Industry Machinery Service Co., Ltd. was established, Teila is always committed to concrete pumps. Our main products include truck mounted pumps, trailer pumps, line pumps, mixer trucks and so on. The brands involved are well-known top brands both in domestic and overseas. Such as Sany, Zoomlion, Putzmeister and Schwing and so on. Each series contains new concrete pump, used concrete pump, refurbished concrete pump, and concrete pump spare parts. So Teila target customers are very focused and specific.

The concrete pump is mainly used for the transportation of concrete in the construction of urban construction, residential area, sports venues, overpass, airport, railway, etc. As long as there is demand for these mentioned four categories of products, Teila can satisfy the needs of customers from any dimension. From maintenance cost, quality standard, service efficiency integrated into a complete value chain based on customer requirements.

The structure and characteristics of Teila concrete pumps are summarized as follows:

Firstly, all new concrete pumps are in stock. Teila is a factory, having maintenance &  refurbishing workshops, and excellent engineering team in Xiangtan, Hunan, China.

Secondly, for used concrete line pump truck for sale, engineers have a strict review mechanism for the source and control of the equipment, checking over 500 items and fill in the first inspection list. Equipment that meets to Teila review standard can enter the factory area for maintenance. Teila used concrete pumps have the characteristics of low risk, small investment, and high returns. Zero failure before leaving the factory!

Thirdly, for refurbished concrete pumps, Teila has advanced and exquisite maintenance and refurbishing technology which leads the industry. Teila refurbishing has introduced the industry-leading standard system of "one, two, three, four and five level". Strict maintenance and inspection according to standard procedures, implement the process operation, standardize management, customers are assured to purchase and use it conveniently.

Fourthly, from purchase to delivery one-stop services and there is no worry from cost to after-sale service.