🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

machine (211)

PRESERVATION LINES

On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with the external transportation unit, the preservation line consists of a pass through blasting machine, a painting unit and a drying tunnel with its associated slat conveyor.

 

Typical plates widths can vary up to 2500mm, height can vary from 5mm to 1000mm, length can vary from 2000mm to 12000mm.

 

  1. Workpiece conveyor system

 

The whole roller conveyor system adopts frequency control step-less speed regulation, is able to synchronous running, each department is capable of independent action.

 

Blast cabinet’ rollers are with special wear-resistant sleeves to prevent blasting abrasion.

 

Plate chain conveyor with "v" shaped structure, painted steel short-term exposure to avoid film damage.

 

  1. Blasting cleaning

 

Workpiece detection (measure height) adopted world-famous brand photoelectric detection, workpiece width measurement device send a signal to PLC so as to

 

automatically adjust abrasive feeding valve opening number.

 

  1. Abrasive cleaning up

First level: Brush+abrasive reclamation

Second level: high-pressure blower blow the workpiece twice one after another after blast cleaning

 

  1. Abrasive reclamation system

Each of the abrasive reclamation system drive points equipped failure alarm function.

 

  1. Dust collector system

Using HR4-48 Donaldson filter material cartridge dust collector, the dust removal efficiency ≥ 99.5%, dust emission is less than 30mg/M3.

  1. Spray room

Adopting GRACO X45DL4 high-pressure Airless spraying pump, compression ratio 45:1, flow 38L/min,

Using a standard linear guide trolley, frequency conversion buffer on both ends of trolley stroke. Workpiece detection and transmission system separated from the spray gun set, paint mist interference-free, easy to clean paint scale.

 

  1. Drying room

Adopt dielectric Heaters and hot air circulation principle so that the heat can be fully utilized.

Drying room temperature adjustable from 40℃ to 70℃

Plate chain conveyor systems increase the eccentrical wheels, which saved the problems of deviation and high rate failure.

  1. Paint mist filtration devices and harmful gas purifier

This system has automatic explosion-proof alarm function for paint mist concentration. Adopt advanced cardboard to filter paint mist, it is maintenance-free within one year, using activated carbon for adsorption of harmful gases. After this system it will be in accordance with the air pollution emission standards. (Paint mist emission standard ≤ 120mg/M3, p-xylene: emissions concentrations ≤ 70mg/M3, the 15 meters height exhaust pipe allows the secondary emission rate is 1.0kg/h. )

 

As one of the most professional shot blasting machine suppliers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

 8466579098?profile=original

Read more…

Cottonseed Oil Press Machine

Cottonseed oil expeller machine is mainly composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The platter is ground by the surface grinding machine to ensure the finishing coat and increase the oil output. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards. The commercial importance of the seed of cotton lies in its oil and other products. Cottonseed oil can be used as salad oil and cooking oil. After oil extraction, the residue or seed kernel can be used as livestock feed. Use a cotton gin to remove short lint from seeds. It can then be used to make roving and various fiber products. Seed hulls can be used as coarse feed for animals. Although the ancient Chinese and Indians used crude methods to extract cottonseed oil for medicine and lighting, large-scale industrial use is a new development. Cottonseed is the seed of a cotton crop. The exterior of cottonseed is a hard brown seed shell, and its shape and size vary with the variety. The seed shell contains the embryo, which is the main part of cottonseed, also known as the seed kernel. The oil content of seed kernels can be up to 35-45%, containing about 39% protein and 0.2% gossypol. The cottonseed oil machine can press all oil crops continuously: soybean, peanut, rapeseed, sesame, palm seed, sunflower, cottonseed, tung seed, coconut, olive, rice bran, palm tree, corn husk, etc.

 

  1. Advanced technology and long life

A steel casing is added at the main shaft of the speed reducer of cotton oil mill machinery. Press cage to change single bar to double bar. Adopting high-quality steel, through carburizing quenching or high-frequency quenching, it has the advantages of high hardness, good wear resistance, high precision, running balance and no noise. It satisfies the long-term continuous automatic production and can be used for more than 30 years.

 

  1. High oil yield and large output of cotton oil mill machinery:

The cottonseed oil expeller uses the world's advanced enhanced pressure structure cutters circular row. The pressure of barrel is high. The newly developed four-stage and five-stage compression, the pressure is higher. Their oil yield of soybean is up to 18%, second to none in China.

 

  1. Low energy consumption, labor-saving:

Cotton oil mill machinery adopts infrared heating. It automatically controls temperature, reduces heat loss and shortens heating time. The transmission adopts planetary gear, the first in China. It greatly reduces energy consumption by more than 30 percent. Cottonseed oil machine can achieve automatic control of electrical production and reduce operating personnel.8466525071?profile=original8466526073?profile=original8466526290?profile=original

Read more…

Urad Dal Color Sorter

Model PRO-B3,with capacity 1000-2000 kg/hour

Color Sorter Function

LINPRO AI Urad dal color sortex machine able to separate the defective urad dals according to the color difference with good urad dals, through blowing the mildew/bited/diseased/immature urad dal out by high frenquency injector.


Technical Advantage of Urad Dal Color Sorter

Urad Dal Color Sorter

Urad Dal Color Sorter Details

Urad Dal Color Sorter

If there is any questions about how to choose the most suitable size urad dal color sorting machine, please feel free to contact with us. Thanks.

After sales service

Below are our basic after sales services:
1. Our professional engineer available to service machine in local;
2. 1 year machine quality guarantee;
3. Software updated lifetime to enjoy LINPRO’s newest technology.
Urad Dal Color Sorter
Please feel free to contact with us for more details of our VIP service politics.

About Urad Dal Color Sorter

Urad dal is popular in Northern India, largely used to make dal from the whole or split, dehusked seeds. The bean is boiled and eaten whole or, after splitting, made into dal; prepared like this it has an unusual mucilaginous texture.

It is also extensively used in South Indian culinary preparations. Black gram is one of the key ingredients in making idli and dosa batter, in which one part of black gram is mixed with three or four parts of idli rice to make the batter. vada or udid vada also contain black gram and are made from soaked batter and deep-fried in cooking oil. The dough is also used in making papadum, in which white lentils are usually used.

It is very popular in Punjabi cuisine as an ingredient of dal makhani. In Bengal, it is used in biulir dal. In Rajasthan, It is used to prepare dal which is usually consumed with bati.

Read more…

PIPE SHOT BLASTING MACHINE

Pipe blasting equipment suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors.

 

Pipe outer wall shot blasting machine

Pipe outer wall shot blasting machine, also known as the diabolo shot blasting machine.

 

Steel pipe shot blasting machine moves through the machine on skew roller conveyors. Such form of the conveyor provides simultaneous rotation and transition movement of the pipes through the machine, which can achieve evenly blasted surface. KT series turbines made from wear-resistant materials, with power from 5.5 to 45kw provide efficient and quality shot blasting. The shot blasting part of the machine’s robust housing is protected by wear-resistant shields made from manganese steel. Entry and exit seals chamber with a series of rubber screens keep the abrasive inside the machine. Screw conveyor, an elevator and sand cleaner provide returning and continuing cleaning of the abrasive. Standard equipment includes PLC Siemens, display, automatic or manual mode, automatic start-up of turbines, working-hours counter, variable frequency drive of the cylinder drive, etc. Machines may be built into highly productive lines for basic color application, including drying chamber, automatic coloring chamber and drying tunnel.

 

Pipe Shot Blasting Machine Parameter:

ITEM

ST500

RT800

RT15000

Dimension of pipe(Dia.×L) (mm):

Φ (50-500) × (6000-10000)

Φ (150-800) × (6000-10000)

Φ (250-15000) × (6000-10000)

Wheel conveyor speed (kg):

1 to 3

1 to 3

1 to 3

Number of blast wheels and power (kW):

2×15

2×15

2×30

Material of table:

Manganese

Manganese

Manganese

Ventilation requirements (m3/h):

5000 to 7000

8000 to 14500

20000-26000

Material of Protective lining

Manganese/Cast alloy

Manganese/Cast alloy

Manganese/Cast alloy

Material of blast chamber

Mild steel

Mild steel

Mild steel

 

Pipe inner wall shot blasting machine

A complete system includes Moveable Front and rear Chamber, Left & Right Hydraulic Moveable Blast Wheel, Belt conveyors, Bucket Elevator, Platform, Abrasive Separator, Dust Collector, Blast Wheel Moving Mechanism, Hydraulic Loading, and Unloading System and Control Panel.

 

We design the loading mechanism as Inclined Rail Type. When the pipe reaches to the work position, the moveable sealing chambers move inside droved by the cylinder. Both of the ports of the pipe are sealing. Then start the dust collector system, abrasive recovery system, and moveable blast wheel. The large airflow dust collector system we designed not only can dedusting but also recovery the abrasive during the blasting operation. After finish, off the feeder and blast wheel, then the moveable blast wheel mechanism out the pipe. The moveable sealing chambers move outside. Pull out the pipe used the pull mechanism on the trolley, then the pipe roll down the unloading conveyor automatic. There also have a vacuum recovery machine at the unloading conveyor to the abrasives remnant in the pipe. One operating cycle is finished.

 

As one of the most professional shot blasting machine suppliers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

 

 8466575659?profile=original

Read more…

PAVERS SHOT BLASTING MACHINE

Paver shot blasting machine is mainly used for surface roughening treatment of marbles, granites, concrete products, and natural stone. It provides twin advantage foremost subject field end provides outstanding appearance as a result of the rough surface and therefore the exposed aggregates. Second "roughened" surface has excellent non-slip properties.

 

Pavers Shot Blasting Machine Basic Specification

QGS Series Roller Conveyor Type for Pavers Length ≥60cm

Machine Model

QGS600

QGS800

QGS1000

QGS1200

QGS1500

Max. working width of machine(mm)

600

800

1000

1200

1500

Max. working height of machine(mm)

400

400

400

400

400

Working speed(frequency adjustable) m/min

0.5~6

0.5~6

0.5~6

0.5~6

0.5~6

number of wheels×power(kw)

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

Vertical wheel optional

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

Foundation pit required

No

No

No

No

No

 

QGP Series Rubber belt Type for Pavers Length ≤60cm

 

Machine Model

QGP600

QGP800

QGP1000

QGP1200

QGP1500

Max. working width of machine(mm)

600

800

1000

1200

1500

Max. working height of machine(mm)

400

400

400

400

400

Working speed(frequency adjustable) m/min

0.5~6

0.5~6

0.5~6

0.5~6

0.5~6

number of wheels×power(kw)

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

2×7.5/11/15

Vertical wheel optional

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

1×7.5/11/15

Foundation pit required

No

No

No

No

No

 

The working principle of the paver shot blasting machine:

Marble shot blasting machine is predominantly used to blast marbles, granites, concrete blocks to create an improved aesthetic appearance, taking out cement and making styling attributes such as granite chips visible. The working principle: different sized abrasive, thrown by the rapidly rotating blast wheel, is accelerated towards the surface being prepared. The huge impact force of the abrasive quickly etches a unique three-dimensional character of the surface. The products processed in this way have a high-quality surface appearance without overlapped and dead zone, it also has high production efficiency and low cost. Comparison with the old power blader and singeing process method, it has higher efficiency and lower cost, and if connected to our dust collector, the dust and contaminants will be recycled automatically at a very low dust emission level, which complies with EU environmental standards.

 

The concrete block/stone shot blasting machine can be integrated into a production line due to its modern control system with the relevant interfaces, different belt lengths and well-coordinated transfer stations (e.g. sheets or rollers).

 

Advantage of paver shot blasting machine:

1.Speed adjustment of conveyor and blast wheels is controlled through an Inverter.

 

2.The number and the position of the blast wheels can change depending on the geometry, customer requirement and on the workpieces, such as only the blasting of the upper side, or need to blast lateral side.

 

3.With proper regulated control and type of shot used in the shot blast machine, it is possible to produce different surface finishes to produce an "antique" effect on marble stones and ‘bush-hammering's effect on cement products.

 

All paver shot blasting machine with Blow-off station. After blasting, a blow-off station with a high-pressure blower removes the shot from the surface of the concrete blocks/stone. The nozzles are adjustable in height and therefore adaptable for the treatment of different concrete block/stone sizes.

 

As one of the most professionalshot blasting manufacturers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

 

 8466574068?profile=original

Read more…

PMMA (Acrylic Plastic)

Material Description: Acrylic plastic is commonly known as plexiglass, resistant to outdoor aging. It has excellent light transmission and good surface finish, and can print transparent and translucent products with certain strength requirements.

f:id:duchgroup:20190921162059j:plain



The disadvantage is that the surface hardness is slightly lower and it is easy to scratch.

 

Application: Widely used in automotive lighting signs, door glass and lamp glass covers, also be used to model teeth for orthodontic treatment. Suitable for parts with transparent insulation and low strength requirements.

 

Production process: Injection MoldingCNC Machining, Pmma Injection Molding

 

We have the world's most advanced vacuum casting machine for sale, and provide post-processing lines such as polishing, painting and assembly. We can provide small batch production of small and medium-sized parts quikly. If you are looking for reliable vacuum casting service, please contact our professional team at info@duchgroup.com or contact us by visiting our website, we will provide quotes and suggestions free of charge.                       

 
Read more…

Coconut Oil Press Machine

Coconut oil, made from coconut meat (copra) processing, has a wide application. It can be used in detergents, resin, paint, soap, and other processing industry. Through refining, it can even be edible with high nutritional value. In China's Yunnan, Hainan, Taiwan, coconut planting is wide. It is a very good investment project to process coconut oil in this regions.

 

 

There are many options to process coconut oil. The widely used is the squeezing method. The coconut oil can be produced by directly pressing it through the copra oil expeller machine. Cold pressed coconut oil is made from fresh coconut, retaining the inherent odor and nutrition. As for general coconut oil, the general press can meet the requirements. For the high-quality cold oil, we should choose cold pressing and reasonable equipment.

 

The copra oil press machine adopts the pure physical method to press the oil. No reagent is added in the production process, which ensures the safe, healthy, pollution-free and non-additive edible oil. It also ensures the original ecology and natural nature of the pressed oil. Thus coconut oil press machine enjoys great popularity among people. The production of oil press is transparency. Consumers can watch the whole process so that consumers are completely relieved. It is the first choice for whether gift or consumption. Therefore, more and more people choose to join the oil extraction industry, and more and more fresh oil workshops appear in our life. They bring convenience to consumers while reassuring consumers.

 

Copra oil expeller machine is a new multi-functional screw oil press which consists of the automatic control box, heating press part, adjusting part, driving part and vacuum filter part. The speed reducer of screw oil extraction machine has high wear resistance, which can effectively prolong the service life of oil extraction machine and save energy and electricity. With the three-stage press, the oil output rate is higher and productivity benefits are higher.8466524700?profile=original8466526290?profile=original8466524679?profile=original

Read more…

OVERHEAD RAIL SHOT BLASTING MACHINE

Overhead rail shot blasting machine allows the workpieces to move with constant speed through the machine. The conveyor consists of a chain and trolley system suspended from a monorail, and can be driven at a constant speed or can be indexed.

A special feature of the continuously operating pass-through machine is the constant traveling speed of the workpieces. The ability to adapt the moving speed of the workpiece and the wheel power ensures that the machine can be easily and smoothly integrated into an existing production line. The abrasive is pre-accelerated very efficiently by the KT series blast wheels, allowing for short treatment times and reduced abrasive consumption when compared to conventional blast wheels. Maximum coverage of the workpiece is achieved by the blast wheels being arranged in an "X" alignment, diagonally to the moving workpiece. In this formation, the leading edges of complex components, welded sections, and flame-cut parts can be thoroughly blasted.

 

Overhead Rail Shot Blasting Machine Basic Specification

Machine type

HTK 04/05

HTK 08/09

HTK 12/09

HTK 12/11

HTK 12/11Q

Max. workpiece Dia. x b (mm)

300*600

500*1200

800*2000

1000*2500

1200*3000

Max height (mm)

4700

5900

6700

7200

7700

Max width (mm)

4200

5100

5900

6100

6300

Max length (kg)

5000

8500

8500

10500

10500

No. of wheels x power (KW)

4x 7.5

8x7.5

12x11

12x 11

12x 11

Total installed power(KW)

41

72

143

147

157

Exhausted air quantity (m3/h)

6000

12000

18000

22000

25000

Foundation pit

Yes

Yes

Yes

Yes

Yes

 

Applications

 

Removal of mill and forge scale as well as rust

 

Removal of burrs and scales

 

Removal of molding sand

 

Increase of surface roughness

 

Applications include blast cleaning welded steel fabrications, deburring and homogeneous die-cast parts, and peening dynamically stressed components. Batches of small components or singular large, heavy workpieces can be treated.

 

 

Advantage:

 

1.To achieve complete coverage, the workpiece carrying hooks rotate and stop automatically at a different location in the blast chamber. This rotation and oscillation process means that even highly complex workpieces, with hard to reach surfaces, can be safely and accurately treated.

 

2.The transport system can be designed for different size & weights. As an option, carrying hooks are available with integrated chain hoists for operational ease and safety.

 

3.Depending on the workpieces to be treated, and the preceding and subsequent processes, it may be advantageous to combine the carrying hooks with a chain hoist so that workpiece batches or heavy parts can be easily picked up. The chain hoist is operated directly at the loading/unloading station of the overhead rail system.

 

4.It can be used not only alone but also in combination with other machines to form a gas cylinder production line.

 

As one of the most professional shot blasting equipment manufacturers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

8466575296?profile=original

Read more…

Castor Oil Press Machine

Castor oil extraction machine is composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.

 

Characteristics of castor oil press machine:

  1. The low-temperature pressed oil is light in color and rich in nutrition. The pure natural oil can be obtained through precipitation filtration. The refining cost and reduces and consumption was reduced.
  2. The protein pressed under low-temperature has little damage, which is conducive to the full utilization of oil protein.
  3. Low pressing temperature (room temperature 10 ^ C ~ 50 * C).
  4. During the pressing, the oil does not contact with any solvent, acid, alkali, bleaching soil and chemical additives. The nutrition and microelement loss of oil and oilseed meals are small and protein content of cake feeds is high
  5. High oil output rate -- compared with the old equipment, its normal oil output rate can be 2 to 3 percentage points higher, with an average of 1 to 3 kilos more for every 100 kg of peanut processed. The annual economic benefit is considerable.
  6. Energy saving -- At the same output electrical power consumed can be reduced by 40%. Calculate with average every hour save 6 degrees electricity, daily production can save 30 yuan electric charge.
  7. Labor-saving -- At the same output, labor can be reduced by 60%, saving about 40 yuan per day.
  8. Wide use -- One machine is multi-purpose. It can press more than 30 kinds of oil crops such as peanut, flax, sesame, rapeseed, oil sunflower, cottonseed, and soybean.
  9. Pure oil -- Filter residue by vacuum to ensure purity of oil and meet health and quarantine standards.
  10. Small floor space -- 10-20 square meters can meet the requirements.

 

The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.8466526290?profile=original8466585282?profile=original

Read more…

Digital Hearing Aid

Digital hearing aid is a hearing device that receives sound and digitizes it (breaks sound waves up into very small, discrete units) prior to amplification. And it built-in intelligence that allows them to discern between soft, but desirable sounds and louder, but unwanted noise. Such devices can amplify the former while neutralizing the latter for better performance in a variety of environments. They can divide into two categories, one is the programmable hearing aid and another one is the non-programmable hearing aid. 
8466560079?profile=original
For digital ear machine, "Channels" and "Bands" which are also some of the most misunderstood by users. A band is what is used to control volume in different frequencies and channels break up the frequency range into individual channels. In short, more bands and channels provide you with a more granular sound quality. We can see 2 Channels, 4 Channels, 6 Channels, 8 Channels and even 32 Channels digital hearing aid sound amplifier on the market, more channels will more accurate.

 

Huizhou Jinghao Medical Technology CO., LTD. is the sole listed hearing aids/ hearing amplifier manufacturer in China, be famous for provide good quality and good price hearing aids/hearing amplifier. We passed BSCI, ISO13485, ISO9001, C-TPAT, SQP ,CVS HEALTH  etc audit ,and all products with CE, RoHS, FDA certificates.

Read more…

MESH BELT SHOT BLASTING MACHINE

 Wire mesh belt shot blasting machine  is suitable for continuous blasting thin and collision-sensitive die castings, pressure castings, ferrous and non-ferrous castings, forgings, automotive accessories, and weldments. Workpiece weight ranging from 1kg to 100kg. A highly wear-resistant wire mesh belt, with tension adjustment, provides the part transport. Wire mesh belt width has 600mm, 800mm, 1000mm and 1200mm.

 

Mesh Belt Shot Blasting Machine Basic Specification

MACHINE TYPE

QGM-600

QGM-800

QGM-1000

QGM-1250

QGM-1500

Max. workpiece dimension Ø x b (mm)

600x400

800x400

1000x400

1250x400

1500x400

wheels Number x power(kW)

4x11

4x11

4x11

4x15

4x15

Alternative wheels Number x power(kW)

4x15

4x15

4x15

6x7.5

6x11

Foundation pit

no

no

no

yes

yes

 

Working process

Treated objects are placed on horizontal network conveyor going through the shot blasting machine. In the process of shot blasting the treated objects move through jets of shot blasting agent from turbines, which are installed at different angles with regard to the direction of the movement which provides efficient treatment.

The machine's housing is protected by wear-resistant manganese steel. High efficiency of the machine is enabled by the system for continued returning and cleaning of the shot blasting agent, along with efficient shot blasting turbines made from wear-resistant materials. The shot blasting machine's size, number, and power of shot blasting turbines, length of network rail conveyor on the treated object's loading and unloading site, the capacity of the conveyor and frequency regulation of turbine's revolutions are done in accordance with the needs and specifications of the buyer.

 

Mesh belt shot blasting machine advantage:

  1. The Mesh Belt shot blast machines provide a frequency controlled speed variable mesh belt surface on which a variety of parts can be uniformly blasted. The high-quality mesh belt ensures that the workpiece remains in the perfect position to be blasted. As each part is blasted in a controlled fashion this technology is perfect for thin-walled parts.
  2. The mesh belt is of high wear resistance, it can use 8-9 years.
  3. The blasting machine shell is made of 10mm high-quality carbon steel plate by laser cutting and precision bending. The shell is welded by the special fixture to ensure the parallelism of the two sides of the blasting machine shell and the concentricity of the hole.
  4. Mesh belt shot blasting machine with cartridge filter dust collector, meet European environmental requirements.

 

As one of the most professional shot blasting machine manufacturers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

8466579085?profile=original

Read more…

Oil Press Machine

As a professional of screw oil press machine China, Guangxin has designed for various needs of oil press machines from the customers worldwide. The brand "Guangxin" oil press has always been highly admired since its foundation. The main product, screw oil press, used to press oil from various oil plants, with different functions combined with the oil press machine.

 

Guangxin manufacturer has a professional technical service team, providing timely and comprehensive guidance and service for customers. As a strong brand for screw oil press, Guangxin has been kept on upgrading technology in the past 20 years, which is the promise to users, also a responsibility of Guangxin stuff. Adhering to the goal of "produce the better oil press for making better quality oil" leads Guangxin oil press into the world.

 

Main features of single screw oil press machines:

  1. The screw oil press machines can be widely used in all scales of oil factories, suit for squeezing over 20 kinds of seeds.
  2. The screw oil press machines can be worked for continuously 24 hours.
  3. The screw oil press machine has advantages of small investment, high working efficiency.
  4. Easy operation and maintenance.

 

Working principle of Single Screw Oil Press :

Under the combined effects of several forces, such as the pressure generated as the space in the squeeze chest becoming smaller, the propulsion of the revolving spiral axes, the resistance of the multilateral arc curves on the squeeze loops, the extrusion & friction between the oil plants, oil squeezed from the oil plants comes out from the squeeze bars and the grooves of the squeeze loops. The residue is conveyed to the end of the press chest and discharges in thin strips of oil cake from the space between the cake adjuster and the loop for the cake out. Then the whole separation process of oil from oil plants is completed.8466525092?profile=original8466585265?profile=original8466585097?profile=original8466585664?profile=original

Read more…

MECHANICAL CNC TURRET PUNCHING PRESS MACHINE

Closed CNC mechanical punch press machine by the programming software (or manual) processing program, by the servo feeding mechanism sent the plate material to the required processing position, at the same time by the die selection system select the appropriate die from the turret, by the mechanical power system according to the procedure of punching, automatic completion of the workpiece processing.

 

Turret

 

The turret we use high strength wear-resistant materials-ductile iron, with the features of automatic lubrication and minimal wear.

 

Adopts integrated cast thick turret structure after heat treatment to eliminate stress annealing.

 

Using special fixture processing in pair.

 

Turret thickness: upper 80mm, lower 70mm

 

Worktable

 

We adopt brush and universal ball mixed worktable, can not only facilitate processing but also can protect the plate very well.

 

Feed mechanism

 

About the crossbeam, we using lengthened and integrated structure(up to 3700mm); after integrated rigorous stress relief annealing heat treatment, suit for processing large plate, stable and safe.

 

About the linear guide rail, we choose "HIWIN" brand-wide seat linear guide rail which originally imported from Taiwan.

 

About the ball screw, we choose "TBI" brand large stroke ball screw which originally imported from Taiwan.

 

About the clamps, we using full floating structure clamps.

 

 

 

Basic Specification

Model

Name

unit

Parameters

1

Model

/

J30-A

J30-B

J30-C

J30-D

2

tool station

number

16

twenty four

32

32

3

Punching pressure

KN(T)

300(30)

4

Punching form

/

Pneumatic clutch drive

5

Frame structure

/

Closed bed

6

machined sheet metal

X

mm

5000(Relocating with one time)

Y

mm

1250 or  1500

7

thickness of machined sheet metal

mm

<6

8

stamping frequency

cpm

<250

9

Pliers number

only

3

10

Clamp mechanism

/

Pneumatic

11

Repositioning cylinder

set

2

12

Control axis number

One

3(X、Y、W)

13

Turntable diameter

mm

640

780

900

1040

14

Mould form

/

Thick turret and long guide

15

Worktable structure

/

Brush plate and floating universal ball

16

Punching accuracy of primary positioning

mm

±0.1

17

carrying weight

Kg

<150

18

Gas source

Mpa

O.5

19

Total power

KW

12.5

20

speed of sheet movement

m / min

<60

twenty one

Rotating tower speed

r / min

30

twenty two

Machine weight

your

13

twenty three

Shape size

mm

5000*4600*2000


Mold distribution

 

A

~12.7mm

B

~31.7mm

C

~50.8mm

D

~ 88.9mm

16  turret1

4

8

4

0

16 turret2

8

4

2

2

24  turret

12

8

2

2

32 turret

16

12

2

2

32  turret

(rotating with 2 B stations)

16

12

2

2

 

Application of the mechanical punching machine 

Widely used in punching processing machinery, electrical appliances, instruments, screens, hardware, metal furniture; all kinds of metal plates, boxes, cabinets and other industries.

 

As one of the most professional shot blasting companies, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

 8466575095?profile=original

Read more…

HYDRAULIC CNC TURRET PUNCHING MACHINE

The driving system of the Y30 series CNC turret punch machine is hydraulic, with low noise, high speed, and high efficiency, and the thickness of the punching plate is 6mm. The design of high precision and high repetitive positioning accuracy enables the machine to produce more high-precision parts than other similar machines.

 

Features of the CNC hydraulic punching machine

 

  1. Adopts the hydraulic system of the first class, whose stroke and speed are changed digitally. the max. punch hit can be reached 600hpm, and that at 25mm pace can be up to 350hpm.

 

  1. The large lead ball screw and linear guideway of high precision are equipped for driving.

 

  1. The first-class CNC system with digital AC servo motor ensures precision.

 

  1. The imported pneumatic, hydraulic and electric components ensure the perfect quality.

 

  1. The turret with bushing is processed in pairs to make sure the coaxial of the punch and die, so the service life of the tooling together with the turret is largely extended.

 

  1. After the advanced process and heat treatment, the service life of the tooling has been extended to a large extent.

 

adopting worm-wheel and worm mechanism of high precision. the auto-index, whose max. diameter is 88.9mm, can be extended.

 

  1. Central lubrication unit reduces the friction between each working pairs to extend the machine service life.

 

  1. Flexible configuration with long or short tooling can be selected according to the customer's requirement.

 

The integrated structure of beam and carriage enhances the rigidity and precision, which is especially suitable for VT-500,600and 800.

 

Basic Specification

No.

Name

unit

Parameter

1

Model

/

Y30-A

Y30-B

Y30-C

Y30-D

2

Workstation

number

16

twenty four

32

32

3

Punching pressure

KN(T)

300(30)

4

Punching form

/

Hydraulic drive

5

Frame structure

/

Closed bed

6

machined sheet metal

X axis

mm

5000(Relocating with one time)

And axis

mm

1250  or  1500

7

thickness of machined sheet metal

mm

<6

8

stamping frequency

cpm

<600

9

Pliers number

only

3

10

Clamp mechanism

/

Pneumatic

11

Repositioning cylinder

set

2

12

Control axis number

individual

4 (X, Y, W, Z)

13

Turntable diameter

mm

620

780

900

1040

14

Mould form

/

Thick turret and long die

15

Worktable structure

/

Brush plate and floating universal ball

16

Punching accuracy of primary positioning

mm

±0.1

17

carrying weight

Kg

<150

18

Gas source

Mpa

O.5

19

Total power

KW

twenty two

20

speed of sheet movement

m / min

<60

twenty one

Rotating tower speed

r / min

30

twenty two

Machine weight

your

12

twenty three

Outer size

mm

5000*4600*2000

 

Mold distribution

 

A

~12.7mm

B

~31.7mm

C

~50.8mm

D

~ 88.9mm

16  turret1

4

8

4

0

16 turret2

8

4

2

2

24  turret

12

8

2

2

32 turret

16

12

2

2

32  turret

(rotating with 2 B stations)

16

12

2

2

 

Application

CNC hydraulic turret punch press can be applied to punching, drawing and other shapes of holes in sheet metal. It is suitable for processing of batch or sample, reducing mold investment and reducing production cost. It is mainly used in various large and low-level switch cabinets, control panels and air conditioning panels. Box, cabinet, shell, metal furniture, kitchenware, advertising industry.

 

As one of the most professional shot blasting machine suppliers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

8466575080?profile=original

Read more…

JH-337 BTE Rechargeable Hearing Aid / Hearing Amplifier

Features of JH-335 Rechargeable ITE Portable Hearing Aid Hearing Amplifier

  1. Rechargeable behind the ear hearing aid, no need to change battery frequency, reusable and Eco-friendly, Low carbon, environmental protection;
  2. Two charging ways, AC adapter and battery for charging, no matter indoor or outdoor, which is very convenient to use;
  3. Corresponding uncomfortable threshold properly, adjust the maximum sound output, protect the user's ear;
  4. Three different shape earplugs (Big, Fat, Small) are provided, which can fit different people's ear canal;

 

f:id:jinghaomedical:20190707144654j:plain

Precautions of JH-335 Rechargeable ITE Portable Hearing Aid Hearing Amplifier

  1. Charging time: rechargeable hearing aid machine will take around 11 hours for a finished battery to be fully recharged. It's strongly suggested to charge for 12 hours for the first time charging.
  2. During the charging period, the indicator light in the adapter base is showing Redlight
  3. After charging completed, the indicator light will turn to Greenlight.
  4. Important to off the machine before you put on it to your ear.
  5. To choose the right size of earplugs will be more comfortable to the ear, and help a better sounds gain, and avoid any extra noise.
  6. The switch should be turned to the off position when the apparatus is not in use. That will ensure longer battery life

Huizhou Jinghao Medical Technology CO., LTD. is the sole listed hearing aids/ hearing amplifier manufacturer in China, be famous for provide good quality and good price hearing aids/hearing amplifier. We passed BSCI, ISO13485, ISO9001, C-TPAT, SQP ,CVS HEALTH  etc audit ,and all products with CE, RoHS, FDA certificates.

Read more…

Pendulum Grinding Mill

Pendulum mill is also called as suspension roller or Raymond mill. It is a "ring and roller" powder-making mill equipment, which is combined with air flow screening and pneumatic conveying. The pendulum grinder belongs to the roundel immovable mill and has high universality. It also has the characteristics of continuous powder making dry-type, the concentration of grain size, continuous fine fineness, compact structure and so on. The particle size of the pendulum grinding mill can be adjusted in the range of 0.125-0.044mm (equivalent to 120-325 mesh) according to different requirements.

 

The Application Ranges of the Pendulum Grinding Mill

 

The pendulum roller mill is widely used. Common grinding materials and usage ways are as follows:

Soil types: clay, China clay, bentonite, magnesia, clay, bauxite, etc.

Non-metallic ores: gypsum, talc, graphite, fluorite, calcite, limestone, calcite, barytes, apatite, tabular spar, feldspar, quartz and so on.

Metal oxides: manganese iron ore, chromite, Ilmenite, bauxite and so on.

Chemical compounds: coke, lime coke, smelting coke, barium sulfate and so on.

Others: the products of the pendulum grinding mill can be used in many industries. For example, the metallurgical industry produces the magnesia as the refractory layer of blast furnace; the oil industry uses the barytes powder to seal the injector; some industries produce bentonite powder as the lubricant for drilling; the chemical industry produces different stone powder as the filler in rubber, plastics, paper making and paint; porcelain, glass, enamel, white cement, gypsum and magnesia products are all processed by pendulum grinding mill.

The pendulum grinding mill is mainly used for grinding non-inflammable and explosive mineral materials, Moh’s hardness of which is below 7 level and humidity of which is below 6%.

 

Operation Principle of the Pendulum Grinding Mill System

 

The bulk material is broken by the Jaw crusher to a certain size (powdery or fine particles can not pass through the Jaw crusher), and the material is conveyed vertically to the hopper by a bucket elevator. Then, the electromagnetic vibration feeder delivers the materials quantitatively, evenly and continuously into the main machine for grinding. The pulverized fines are carried out by the blower’s airflow and graded by an analytical machine placed above the main engine. Suitable fine powder that meets the requirements will be entered into the large cyclone separator with the air flow. After separation, the powder will be discharged through the discharge pipe, that is a qualified product. The air flow enters the blower by the return duct at the upper end of the cyclone separator. The whole airflow system is closed loop and operates under negative pressure. Because the grinding material contains moisture, when milling the moisture will evaporate into gas. That gas then leaks in each connection of the whole pipe, which makes an increase in the volume of air in the circulating air stream.

 

This increased air volume will be introduced into the small cyclone separator from the air duct between the blower and the main engine. The fine powder with the air flow is collected by the small cyclone separator. Then it will be discharged by another outlet pipe. The gas will be discharged into the atmosphere through the exhaust pipe of the upper end of the small cyclone separator.

8466561286?profile=original

Read more…

Micro Powder Mill

GKW Micro Powder Mill is mainly used in chemical industry such as grinding glass, rubber, pesticides, enamel, paint, phosphate fertilizer, paper. Hardness below seven Moh's hardness following humidity below 6% non-flammable and non-explosive materials. Such as talc, barite, calcite, limestone, manganese ore, iron ore soil, chrome ore, quartz, gypsum, bentonite, etc.

Micro Powder Mill Technical & Structural Benefits:

Finished particle size 400 mesh -1250 mesh (stepless adjustment);

Breakthrough hard materials and powdery materials, and grind the materials such as talc and fly ash;

Low cost of equipment wearing parts;

Convenient equipment maintenance, maintenance & replacement of wearing parts;

Low energy consumption and high output, for users to create better economic results;

Energy conservation and environmental protection.

 

odel

Max Feeding Size

Product Fineness

 

(mash)

Capacity

Total Installed Power

GKW970

≤10mm

400-1250mesh

500-3200kg/h

120kw

GKW1270

≤10mm

400-1250mesh

1000-6500kg/h

225kw

 

 

The micro powder grinding mill is a highly efficient flour milling equipment, which was made on the basis of high-pressure powder mill and was improved by fineness classification technology. The advanced fineness classification technology of Germany and Japan adopts the principle of fluid mechanics. Scientists studied diligently with a quiet mind, and then they designed a new micro powder mill. So they solve the problem of high cost successfully. It is a high-efficiency and high-pressure micro powder mill. 

The Application Scopes of Micro Powder Mill

The micro powder mill is mainly suitable for grinding of conventional materials and the ultra-fine powder processing of non inflammable and non explosive materials, such as kaolin, limestone, calcite, talcum, marble, barite, gypsum, iron oxide red, iron oxide green, aluminum hydroxide, pigment, bentonite, clay, coal, activated carbon and so on, the humidity of which is less than 8%, and the Moh's hardness of which is less than level 6.

The Structure Characteristics of Micro Powder Mill

The high-pressure micro powder mill mainly consists of the main engine, blower, superfine analyzer, finished cyclone powder collector, bag filter and connecting duct. According to user needs, it can provide with auxiliary equipment such as the hoist, storage bin, electric cabinet, feeder, crusher and so on. In the grinding mill room, the grinding roller assembly is hung on the grinding cradle through the cross arm shaft. The grinding cradle, spindle and the relieving tool post are fixed. The pressure spring is tightly pressed on the outer end of the cantilever housing of the grinding roller bearing chamber by a tension rod. Taking the transverse load axis as the supporting point, the grinding roller is firmly pressed on the inner surface of the grinding ring by the spring pressure.

When the motor is rotated through the drive, the blade of the blade is synchronized with the grinding roller, and the roller rolls around the surface of the grinding ring and rotates around itself. The analysis machine drives the rotating of the impeller through the motor drive. The speed adjustment of the analysis machine determines the fineness of the powder. The relieving tool in the relieving tool post and the grinding roller rotate at the same time. Then the grinding roller rotates on the inner surface of the grinding ring and revolves around itself. The analysis machine drives the impeller of the analysis machine through the motor drive device, and the speed adjustment of the analyzer determines the fineness of the powder.

The Main Features of Micro Powder Grinder Mill

The application scope of the high-pressure powder mill is much larger than that of the airflow mill.

Compared with other mills, the grinding pressure of grinding roller on the material can provide 800---1200Kg under the action of high-pressure spring. It saves energy. Under the same circumstance of output and fineness, the energy consumption of the system is only 1/3 of that of the airflow mill.

The investment is small and the efficiency is high. Under the same circumstance of output and fineness, the price is only 1/8 of the airflow mill.

Compared with the air mill, the production link is less. Firstly the airflow mill must crush the material of 20mm to the superfine powder of 100 mesh, and the high-pressure micro powder mill can make the material reached the average particle size about 6.5 μm to 12.5 μm for one time, of which the size is below the 20mm.

The grinding device adopts overlapping type multiple stage seal and has good sealing performance.

The dust removal effect of the mill can totally reach the national dust emission standard.

8466561462?profile=original

Read more…

WOODEN FURNITURE CNC

CNC routers for woodworking is also called Furniture Production Line ,based on the ordinary CNC router, and mainly used to deal with woodworking products. And it is a CNC solution for customized furniture production such as wardrobe, cabinets and office furniture . Especially with the function of fully automatic loading and unloading, it very popular in the furniture processing industry. Firstly ,The structure of the CNC router 1530 is exquisite, achieving a win-win of speed and precision. Secondly, with the vacuum adsorption table, it can process different shapes of plates. Then drilling and automatic tool change combination, can achieve drilling, pulling and other functions. Besides that with self-contained pusher device, it’s convenient for operators to take materials, saving time. It also has dual-station equipment, which can be used to maximize production efficiency.

 

We have wood router machine, RFQ today!

 8466539861?profile=original

Read more…

The most important function of laser automatic welding machine is to use the laser beam with very high energy density as a heat source to achieve the welding effect. Generally speaking, the use of continuous laser beam can reflect the role of welding to better achieve good welding effect at the same time. Usually there are certain technological parameters for laser automatic welding machine. Then, what are the main process parameters of laser automatic welding machine with high quality and quantity?

 

  1. The power density requirement of laser automatic welding machine:

Power density is one of the most important parameters of laser automatic welding machine. For example, high power density can heat the surface to boiling point in microsecond time and produce a lot of vaporization, which can make the precision welding and seamless welding of processing materials better.

 

  1. Pulse waveform of laser automatic welding machine:

Pulse waveform of laser automatic welding machine is an important element for laser welding of thin sheet material. For example, when high intensity laser beam is applied to the surface of material to be welded, most of the reflectivity of metal surface will decrease and its reflectivity will change with the surface temperature. So we should pay attention to the change of metal reflectivity caused by laser pulse waveform in laser automatic welding machine.

 

  1. Pulse width of laser automatic welding machine:

Pulse width of laser automatic welding machine is an important parameter to distinguish material of removal and melting in laser welding. It is also a key parameter to determine the cost and volume of processing equipment. This parameter is suitable for precision machining, and the general material can be neglected.

 

  1. Defocus of laser automatic welding machine:

Defocusing is usually a process parameter that has an effect on the quality of laser automatic welding machine. In order to prevent the evaporation of holes caused by the high power density of the spot center at the laser focus, people should pay attention to the need for defocusing during laser welding.8466537698?profile=original

Read more…

EPS STYROFOAM CNC ROUTER

EPS cnc foam carving adopts integrated casting machine body by well heat treated, which makes machine more stable, rigid, endurable. Adopting Imported high-precision ball screw and Taiwan HIWIN linear square rails, which ensure the machining precision. Especially with a wider travel distance, which is designed for large scale production and suitable for EPS, casting wood mold, engineering plastics and other non-metal material mold.

 

Blue Elephant EPS styrofoam cnc router with many optional configuration and service available. According to your requirement, different configurations of Foam Blue Elephant CNC Router will be offered. For example, the Z axis can be heighten, and the whole working size also can be customized.

 8466539494?profile=original

Read more…

🔥Christian Music News