🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

machine (211)

Palm Kernel Oil Press Machine

Oil palm is a widely planted oil crop in the tropics. Not only the palm fruit but also the palm kernel can extract oil. In general, the palm oil expeller machine is mainly used to extract palm oil, which is called red palm oil. Palm kernel oil pressing machine is mainly used to extract palm kernel oil, also known as white palm oil.

Palm kernel oil expeller machine is the main equipment for extracting palm kernel oil. The palm kernel oil extraction machine can squeeze most of the oil from the palm oil crop under high pressure through mechanical pressure.

 

If your raw material is a clean palm kernel, the steps you take to extract palm kernel oil are as follows:

First, separate the palm-shell and palm-kernel by kernel separating equipment.

 

Secondly, break the palm kernel into small pieces, and the surface area of oil is increased after crushing, which is conducive to the transfer of temperature and moisture during steaming and stir-frying.

 

Thirdly, the purpose of steaming and stir-frying is to completely destroy the palm kernel cells through the action of temperature and moisture. To denature the protein, accumulate the fat, reduce the oil viscosity and surface tension, adjust the elasticity and plasticity of the billet, and passivate the enzymes.

 

Fourth, put the treated oil into the palm kernel oil pressing machine, palm kernel oil extraction machine USES the principle of mechanical external force to extract palm kernel oil:

 

Fifth, the crude palm kernel oil obtained after pressing is generally not clean, there are a lot of impurities. We finally process simply to extract relatively clean palm kernel oil through the leaching or filter equipment;

 

If your raw material is a pressed seed cake from the palm oil crushing plant, you need to do this: after the crushed cake is broken, send it to the fiber separator and fiber polishing roller for fiber separation. After these simple treatments, you can get a cleaner palm kernel, and the rest of the process is the same.

 

Characteristics of palm kernel oil expeller:

Easy operation and maintenance;

High capacity;

High oil yield;8466524478?profile=original

Read more…

Corn Germ Oil Press Machine

The correct installation method of corn oil extraction process:

Before installing the equipment, the newly purchased corn oil extraction machine should be cleaned thoroughly. Remove the spindle and the cage, and polish the outer surface, inner surface and screw feeder of the screw with the abrasive cloth. All lubrication parts shall be lubricated with grease, and the type and brand of the lubricating oil added in the gearbox shall conform to the requirements in the specification. After polishing and cleaning, the equipment of corn germ oil press machine must be arranged according to the original position when installed. Because the arrangement position and order of the circular arrangement have a great relationship with oil extraction performance. After the circular platen is installed, press it with the pressing nut. After the above treatment, the corn oil press equipment can be fixed on the foundation with anchor bolts. When the equipment of corn germ oil extraction process is installed, the motor's belt pulley should be aligned with the belt pulley of the oil extraction machine. They should be in the moderate position and correct rotation direction. The belt tension should be adjusted properly.   

 

The process of extracting corn oil from corn oil press machine

  1. Water embellish

According to the difference between the endosperm and the germ, make the corn husk and germ absorb water. The germ is highly absorbent and expands after absorbing water. The germ increases toughness and elasticity and does not break when breaking grits or crushing grits, making it easy to break away from the embryo. After absorbing water, corn husk is easy to peel, and at the same time, it is helpful to separate from the embryo and reduce the phenomenon of the intercalated or intercalated embryo. This improves the embryo rate and the purity of the germ.

 

  1. Peel and break grits

After the corn is moistened with water, the grits are then peeled and broken. During the operation, the degree of dermal breakage should be strictly controlled to ensure that the germ does not carry the skin and the skin does not carry the germ. Grits are broken into several lobes by a horizontal three-section sand roller. The germs are separated from the endosperm in large amounts as the corn is broken.

 

The proportion of grits and embryos was different. The proportion of grits was 1.30 ~ 1.35 grams/cm³, and the proportion of embryos was 0.78 ~ 0.99 grams/cm³. The separation effect can be effectively controlled by adjusting the height of the grits and the baffle. The extracted germ is then sent to a windscreen to extract the husk from the embryo to improve the purity of the embryo.

 

  1. Embryo screening

The selected embryos still contain grits. We can put them into the grinding machine to press the embryos, and then screen them with the horizontal.

 

  1. Purification

The grits, powder, chaff and other impurities in the germ should be screened out with a vibrating screen before being pressed, so as to improve the purity of the germ as much as possible.

 

  1. Dry

Generally, the water content of corn germ is 11 ~ 15%, and its suitable water content is less than 4%. Therefore, it is necessary to conduct thermal drying on the extracted germ, so that the water content of corn germ can reach less than 4% before being pressed into the machine. The drying methods used are fire drying, steaming wok and mechanical drying.

 

  1. Press

Most of the corn oil press equipment used are type 95 and type 200. With its own baking equipment, it guarantees the extraction of the germ.8466526290?profile=original

Read more…
7

Plastic welding process of conveyor welding machine is achieved in there ways, softening by external heat source, softening by mechanical motion and softening by electromagnetic action.

 

Conveyor belt welding machine used in hot plate welding can be said to be the most simple plastic welding technology. It is especially suitable for welding large plastic materials which need large area of welding surface. The general conveyor belt welding machine acts on the waterproof material. The heat produced softens the product. The period is longer. The molten resin will stick to the waterproofing board and it will not be easy to clean. Impurities that affect bonding strength will be formed for a long time. Pressure and time should be strictly controlled to ensure proper melting amount. With different kinds of resin or metal and resin joint, there will be insufficient strength. But the conveyor belt welding machine produced by our company adopts the way that welding device is simple and welding strength is high, and the shape design of products and welding parts is relatively easy. Generally, after melting and softening the two plastic planes to be welded, remove it quickly to electric heating plate and combine the two surfaces and apply force until it is cooling down.

 

Another way is that when the hot air flow of the welding machine is blowing to the joint area, melt the welding wire between the joint area and the waterproof material and the weld is formed by melting the soldered plastic with the filling material. The welding machine equipment of this method is light and easy to carry but the welding skill requirement of the operator is higher. The two technologies of hot rod and pulse welding are mainly used in the welding of plastic film with small thickness. The two methods are similar. They press two thin films together and use the instantaneous heat generated by a hot rod or nickel-chromium wire to complete the welding.8466528070?profile=original

Read more…

Coconut Oil Press Machine

Coconut oil, made from coconut meat (copra) processing, has a wide application. It can be used in detergents, resin, paint, soap, and other processing industry. Through refining, it can even be edible with high nutritional value. In China's Yunnan, Hainan, Taiwan, coconut planting is wide. It is a very good investment project to process coconut oil in this regions.

There are many options to process coconut oil. The widely used is the squeezing method. The coconut oil can be produced by directly pressing it through the oil press equipment. Cold pressed coconut oil is made from fresh coconut, retaining the inherent odor and nutrition. As for general coconut oil, the general press can meet the requirements. For the high-quality cold oil, we should choose cold pressing and reasonable equipment.

 

The Copra oil expeller adopts the pure physical method to press the oil. No reagent is added in the production process, which ensures the safe, healthy, pollution-free and non-additive edible oil. It also ensures the original ecology and natural nature of the pressed oil. Thus coconut oil press machine enjoys great popularity among people. The production of oil press is transparency. Consumers can watch the whole process so that consumers are completely relieved. It is the first choice for whether gift or consumption. Therefore, more and more people choose to join the oil extraction industry, and more and more fresh oil workshops appear in our life. They bring convenience to consumers while reassuring consumers.

 

Copra oil machine is a new multi-functional screw oil press which consists of the automatic control box, heating press part, adjusting part, driving part and vacuum filter part. The speed reducer of screw oil extraction machine has high wear resistance, which can effectively prolong the service life of oil extraction machine and save energy and electricity. With the three-stage press, the oil output rate is higher and productivity benefits are higher.

 

Coconut oil press machine for sale! RFQ today!8466524900?profile=original

Read more…

Castor Oil Press Machine

Castor oil extraction machine is composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.

Characteristics of castor oil press machine:

  1. The low-temperature pressed oil is light in color and rich in nutrition. The pure natural oil can be obtained through precipitation filtration. The refining cost and reduces and consumption was reduced.
  2. The protein pressed under low-temperature has little damage, which is conducive to the full utilization of oil protein.
  3. Low pressing temperature (room temperature 10 ^ C ~ 50 * C).
  4. During the pressing, the oil does not contact with any solvent, acid, alkali, bleaching soil and chemical additives. The nutrition and microelement loss of oil and oilseed meals are small and protein content of cake feeds is high
  5. High oil output rate -- compared with the old equipment, its normal oil output rate can be 2 to 3 percentage points higher, with an average of 1 to 3 kilos more for every 100 kg of peanut processed. The annual economic benefit is considerable.
  6. Energy saving -- At the same output electrical power consumed can be reduced by 40%. Calculate with average every hour save 6 degrees electricity, daily production can save 30 yuan electric charge.
  7. Labor-saving -- At the same output, labor can be reduced by 60%, saving about 40 yuan per day.
  8. Wide use -- castor oil machineis multi-purpose. It can press more than 30 kinds of oil crops such as peanut, flax, sesame, rapeseed, oil sunflower, cottonseed, and soybean.
  9. Pure oil -- Filter residue by vacuum to ensure purity of oil and meet health and quarantine standards.
  10. Small floor space -- 10-20 square meters can meet the requirements.

 

The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.8466526073?profile=original

Read more…

Small And Medium Scale Single Oil Press Machine

For small oil factory using- the processing capacity from 50kg/h to 200kg/h, with the characteristics of the small investment, wide compatibility, high efficiency, low consumption, simple operating, stable function, easy maintenance, high productivity, and high oil output.

Product Description

Item

YZYX70

YZYX90

YZYX10(95)

YZYX10-6(8/9)

YZYX10J-2

Picture

 

 

 

 

 

Processing Capacity(t/24h)

1.3

3

3.5-4

4.5

4.5

Oil Content of Dry Cakes(%)

≤7.8

≤7.8

≤7.8

≤7.8

≤6.0

Motor Power(kW)

4

5.5

7.5 or11

11

11

Weight(kg)

195

285

570

590

590

Measurement (L*W*H)(mm)

1090*405*806

1200*550*1000

1620*580*1195

1720*580*1185

1720*580*1185

Spiral axes rotate(r/min)

36-42

32-42

32-42

32-42

26-41

 


Note:

This weight has no electro-motors weight.

① It is normal that sometimes the actual results may be a little different from those in the index because the oil plant’s type, quality and original content may be different in different areas.

② The day capacity (t/24 h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.

 

The spiral oil press produced by our company is suitable for squeezing vegetable oil from rapeseed, cottonseed, soybean, shelled peanut, flax seed, tung oilseed, sunflower seed, palm kernel, etc. The product has characteristics of the small investment, high capacity, strong compatibility, and high efficiency. It is widely used in the small oil refinery and rural enterprise.

 

Main Features of Small And Medium Scale Single Small Oil Press Machine

Below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking, cooking, etc.

Oil Plants

Oil content of Dry cakes (%)

Oil yield 
Efficiency (%)

Electricity Consumption
(k.W.h/t)

Rapeseed

≤8.0

≥80

≤35

Cotton seeds

≤7.5

≥75

≤55

Soybean

≤7.0

≥65

≤52

Peanut

≤8.0

≥91

≤35

 

Applicable oil plants and Business of Small And Medium Scale Single Oil Press Machine

  1. More than 30 types of oil plants, such as rapeseed, cottonseed, soybean, shelled peanut, flax seed, sunflower seed, palm kernel, etc.
  2. Uses in oil factory, oil mill, and privates oil production workshop.
  3. Good both for pressing raw oil material and roasted oil material.
  4. Performs well both in cold pressing and hot pressing.
  5. The lower residue oil of the dry cake.

 

The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.

 

Small oil press for sale! RFQ today!8466524700?profile=original

Read more…

At present, pvc membrane welding machine has been widely promoted in a number of plastic welding industry. Various welding defects are inevitable in the process of use. In this article, it mainly analyzes how to solve the problems in debugging or welding.

 

1.Crush and bruise

Pressing injury and abrasion are common problems in the process of pvc membrane machine. Sometimes it's not so serious, and it just gets white or marks. When you encounter such problems, the first thing to do is to ensure that the location of the tooling is not out of alignment. First let off the air of the cylinder, press down the welding head, and carefully observe whether the welding head position of the scratch is correct. If the welding head is in the correct position, or if the abrasion or compression occurs on the support (or lower cover), then it is necessary to observe whether there is any interference between the tooling and the product. If it is old tooling, it is suggested to clean the tooling with alcohol at this time. If it is a new fixture, lightly rub the scratch (especially at the bottom of the step) with sandpaper to prevent burrs. In addition, observe whether the air pressure of the cylinder is too large during welding, whether the film of the pad has not been changed for a long time during welding, or whether there are foreign bodies stuck on the film.

 

If the above work is done, the pressing injury still exists, it can be basically judged as the interference of tooling. At this time, the mold shall be modified according to the size and location of the pressing injury:

(1)slight pressing injury. File the sharp Angle of the tool at the corresponding place of the tool, blunt the sharp Angle of the tool, and then use sandpaper polishing;

 

(2)the pressing injury is serious, but there is no welding rib at the corresponding place. Rub off the interference part of the fixture with an air abrasive rod (be careful not to touch other parts, especially the root part of the air abrasive rod, which may be rubbed off other places without being noticed). After grinding, make it smooth with whetstone and buff with sandpaper;

 

(3)severe crush injury. If there is welding rib in the corresponding place, or if there is serious pressing injury and the interference part is very large, please consult with the designer. Have the processing center dealing with the modified drawing and contact the relevant personnel to confirm whether there is a problem with the injection molding, or whether to improve the product structure.

 

2.Material overflow

If there is any overflow in the welding process of pvc membrane welding machine, do not debug or modify the welding parameters right away. First measure the size after welding, and compare it with the normal value. Adjust according to the difference.

 

3.Insufficient welding strength

If it is old tooling, first stick the product on the welding head, observe whether the gap between the product and the welding head is too large in the weak welding place, to determine whether the welding head is worn; if it is a new tool, please scan it with the welding head, observe its frequency, power and curve, and make sure there is no problem with the welding head.

 

Buy hf welding machine on hf-weld.com!8466527453?profile=original

Read more…

Single Screw Oil Press

The single screw oil press machine produced by Guangxin Manufacturer is suitable for squeezing oil from various kinds of vegetable seeds like the peanut, sunflower seed, sesame, rapeseed, soybean, cottonseed.

 

The series of screw type oil press machine combined with the electric heater has the function of automatically heating the press chamber before pressing, which saves labor and time. The heater can also keep the temperature when the machine stops.

 

We supply multiple choices for processing capacity from 1 ton to 20 tons per day, which can be used in rural small oil processing workshop or big oil mill factory. We can supply specific models of oil press machines according to customer’s requirements, like which kind of raw materials and the processing capacity is required. This will help the customers gain a higher working efficiency when using the machine.

 

Single Screw Oil Press Category:

Main features of single screw oil press machines:

  1. The screw oil press machines can be widely used in all scales of oil factories, suit for squeezing over 20 kinds of seeds.
  2. The screw oil press machines can be worked for continuously 24 hours.
  3. The screw oil press machine has advantages of small investment, high working efficiency.
  4. Easy operation and maintenance.

 

Working principle of Single Screw Oil Press :

Under the combined effects of several forces, such as the pressure generated as the space in the squeeze chest becoming smaller, the propulsion of the revolving spiral axes, the resistance of the multilateral arc curves on the squeeze loops, the extrusion & friction between the oil plants, oil squeezed from the oil plants comes out from the squeeze bars and the grooves of the squeeze loops. The residue is conveyed to the end of the press chest and discharges in thin strips of oil cake from the space between the cake adjuster and the loop for the cake out. Then the whole separation process of oil from oil plants is completed.8466524679?profile=original

Read more…

Home Oil Press

YZYX40 corn oil press machine, has a delicate appearance, compact structure, simple operation, and is easy to disassemble and clean. Equipped with electric heating devices, using intelligent control system, it always keeps squeeze cage setting the temperature to achieve temperature control, suitable for sesame, peanut, rapeseed, soybean, flaxseed and other oilseeds pressing oil.  

Home Oil Press Category:

The Smart home uses plant oil press produced by our company. Compared to similar products in the market, our products have large capacity, low dry cake residual oil rate, superior performance, and is suitable for small farmers markets, supermarkets, restaurants, and family use. Physical pressing the plant oil natural nutrients are not destroyed, in addition to maximizing the preservation of linoleic acid and other unsaturated fatty acids and vitamin E, iron, zinc, etc., but also to keep their fat natural flavor. Squeezing oil is to eat, pure oil to ensure its original taste and flavor, health non-pollution, and therefore large users are welcomed. This product is advocating green, natural and healthy oils brewing.

 

This smart mini home-use edible oil press machine is popularly used by Chinese and Foreign families because it can obtain the healthy oil from the clean oilseeds by customers themselves.8466527293?profile=original

Read more…

 High frequency sealing machine  is the first choice of plastic heat sealing equipment. The principle is different from plastic welding machine with conduction of heat because it is the use of high-frequency electric field polar molecules to produce plastic torsion friction heat, and thus to achieve the purpose of welding. The welding temperature is uniform in the outside and the inside.

 

It is mainly used for all kinds of plastic welding, welding, etc., which are on the basis of PVC (PVC). And it makes blister with different shapes or blisters plastic to weld automatically as well as trimming at the same time. It is suitable to use for two-sided welding of plastic uptake, bubble shell of plastic uptake and for sealing paper card. For special plastic material (PE, PS, PETG) with sealing, the PVC material with more than 30% for plastic welding is the best. Plastic packaging contains (including two-sided blister, blister, and cardboard with heat)automotive interior leather, trademarks, stationery, raincoats, inflatable toys, plastic products, shoe cover, bed, cushion, bags, handbags and other soft sealing processing, pressing various concave-convex patterns, alphabet, bronzing etc..

 

※ The stabilization of frequency

Yu Fei high frequency adopts the industrial band 6.78/13.56/27.12/40.68MHZ and designs a filter, bypass, isolation device which has a little interference to the outside equipment and reach 1/100 of radiant frequency in national standards according to the International Committee on radio interference (CISPR). It is far better than the national standard.

 

※ The suspension of sparks

Yu Fei high frequency with high sensitivity spark suppression circuit can accurately detect spark current imbalance, and to cut off oscillating circuit to suspend sparks quickly as they are produced in the instant, making minimize the damage to mold, raw materials, and products. In the meantime, the warning lights will raise up.

 

※ The automatic control of oscillating current

The oscillating current of adjusting the material thickness of Yu Fei high-frequency output power can be set according to the size and thickness of the products. And then the current will be regulated automatically to control the degree of welding in order to ensure the quality of products are uniform. Also, it can lower the consuming time of welding greatly and increase the productive speed of the machine.

 

The high frequency of Yu Fei is equipped with overvoltage and overcurrent protection device. It can automatically cut off the high voltage to protect the oscillation tube and rectifier when the work is abnormal and avoid the frequency drift caused by improper operation.

 

Yu Fei is committed to decades of research on high frequency and high frequency equipment. Their products are exported to India, Thailand, Ukraine, Turkey, Slovakia, Russia, and other countries. It is leading in technology whose new models maintains international leadership from the beginning to end. It is popular among the customers home and abroad and receives identical favorable comments.

 8466527699?profile=original

Read more…

MFL101 Tank Floor MFL Scanner

Technical Characteristics of MFL101 Tank Floor MFL Scanner

Unique full modular structure, from the main body of the computer mechanism the handle of MFL101 Tank mfl tank floor scanner can be quickly folded, disassembled. It is easy to transport and access manholes. With humanized operation design, the height of armrest and adjustable angle, suitable for different operators. Precise signal conditioning circuit. The four-layer PCB with mixed power excellent performance. data word signal processing system, super computing power, advanced evaluation algorithm.

High-performance touch industrial tablet. The operation is very convenient does not require a keyboard and mouse. Unique probe design. It can pick up the magnetic flux leakage signal to overcome the unwanted signal caused by the eddy current effect. The number of physical channels is up to 32. High-performance lithium battery pack, which is at least 50% lighter than the equivalent capacity lead-acid battery Software design that can be operated efficiently.

All scan parameter settings graphical, intuitive, and easy to use, dramatically increasing the speed of operation and avoiding errors. The magnetization is quickly adjustable. By adjusting the ground clearance the magnetic pole, the magnetization of the detection target plate can be quickly changed to meet the requirements of detecting the thickness and minimize the gravity of the instrument and the bottom plate. This design allows the instrument to adapt to a wide range of floor thicknesses and reduce operator effort, increasing battery life.

Different degrees of non destructive testing machine are represented by non-color blocks. Online analysis of corrosion degree and position, position coordinates can be displayed in a table or on a scan.

 

MFL101 Tank Floor Scanner Performance Parameters Host:

 

Industrial tablet computer interface:

Chinese Working principle: Magnetic flux leakage method:

NdFeB permanent magnet Channel number: 32

Scan width: 260mm

Drive mode: DC brushless motor, worm gear reducer, The motor can be raised.

Convert manual and electric drives at any time.

Detection speed: 0 m / s~0.7m /s step-less adjustable

Detection thickness: 8-20mm Penetration coating: non-magnetic

Penetration thickness: <4mm

Sensitivity: can be set (8-12mm thick 20 % material loss of the bottom plate, 40% material loss of the 12-20mm thick bottom plate

Data storage: local hard disk storage, USB disk dumping

Real-time analysis: Yes

Offline software

Battery specification: 14V40AH

Detection picture

f:id:bkneddy:20190812175907j:plain

f:id:bkneddy:20190812175857j:plainf:id:bkneddy:20190812175848j:plain

 

 




 

Read more…

Manual Egg Tray Production Line

The manual egg tray production line is suitable for the small-scale investment in egg tray production, such as the small chicken farm, waste cardboard or corrugated paper recycles treatment, toilet paper tube recycles treatment and new investors who just in touch with this field.

The investors can use the manual egg tray production line to produce different kinds of 30-cell egg trays, like 15.5lb, 16lb, 17lb, 20lb egg trays etc. The raw material of the egg trays can be the waste newspaper, cardboard, corrugated paper, paper box, books etc.

f:id:lkhongrun:20190817222344p:plain

The manual egg tray making machine production line included pulp making unit and egg tray forming unit, the waste paper mix with water, become into paper pulp, then the paper pulp was transported into egg tray forming machine to make egg trays. After treatment of egg tray forming machine, the egg trays are wet, so the workers should collect these wet egg trays and send them to natural drying.

Our manual egg tray production line contains perfect pulp making equipment, which can make the paper pulp good quality so that the inverted-suction type egg tray forming machine can make good egg trays.

Read more…

Ceramic Membrane Machine Lab & Pilot

The membrane area of CMP pilot machine has the following types: 
0.1 m², 0.2 m², 0.5 m², 1 m², 2 m², 3 m², 4.5 m², 5 m², 6 m², 6.5 m², 8 m², 9 m²

ceramic-membrane-machine-cmp-pilot-machine-pvc-machine.jpg

 

 

FEATURES OF CMP PILOT MACHINE

  • Due to higher membrane velocity, reduce the accumulation of pollutants in the membrane surface, increase membrane flux.
  • Good chemical stability, strong acid, alkali, organic solvents resistance.
  • Cleaning is simple and can be washed in reverse, easy to regenerate.
  • High separation efficiency, the separation process is simple.
  • Low energy consumption.
  • Easy to operate and maintain.
  • Anti-microbial ability does not work with microorganisms.

OVER VIEW OF CMP PILOT MACHINE

CMP pilot membrane machine is particularly suitable for scientific research institutes, universities, manufacturers, is the most effective helper for research and production personnel, and can solve the problems that old crafts and old equipment cannot solve and can be widely applied in the experimental research of extraction, cleaning and impurity treatment in pharmaceutical and Bioengineering, food and beverage, chemical industry, environmental protection and so on.

And we can be customized according to customer needs. Through this series of CMP pilot machine, the influence curves of important process parameters and corresponding cleaning schemes on membrane flux and membrane performance can be obtained, and the test data is true and reliable. According to the test results, the pilot and industrial production are completely reliable, because the amplification of the process is completely physical amplification, the process is mature, the technology is advanced, and the successful engineering case is very rich!

The series CMP pilot machine is made of hygienic grade and corrosion-resistant stainless steel, which will not cause secondary pollution to the treated materials; the obtained products have high quality and good long-term storage stability; the core ceramic membrane element has good regeneration performance and long service life. CMP pilot machine has a  high degree of integration; small footprint, easy operation and maintenance, low operating costs.

CMP pilot machine includes :
  • Separation system,
  • Backwash system,
  • Discharge system,
  • Control system
Read more…

YZYX120ZHWK combined oil press with centrifugal combines with the centrifugal oil filter above the basic function of auto-heating the press cage by replacing the traditional manual wearing in way. The crude oil from the press cage will directly flow into the hydration cylinder of centrifugal oil filter. This centrifugal oil filter machine is easily operated with better working efficient.

Product Description

Main equipment parameters of YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press

ModelProcessing Capacity(T/24H)Oil Press Power(KW)Filtration Power(KW)Temperature Control Power(KW)Oil Content of Dry Cakes(%)Spiral Axes Rotate Speed(r/min)Measurement(L*W*H)(mm)Weight(kg)
YZYX120ZHWK6.5113.2≤7.632-402130*1350*19401080

ZYX120ZHWK centrifugal automatic temperature controlling combined oil press is developed on the basis of the single machine to meet the market demands. The function of auto-heating the press cage has replaced the traditional way by squeezing residue cake, which could shorten the preparation work, reduce the energy consumption and abrasion, and thus lengthen the durability. When the squeezing is suspended, the temperature can be maintained by this system. In the meanwhile, this machine was added with centrifugal filtration function. The crude oil discharged from the press cage will directly flow into the hydration cylinder of centrifugal oil filter (if the oil needs to be cooled, start the stirring function of the centrifugal filter). Once the oil volume reaches the capacity of centrifugal for one time or twice work, it will close the valve of oil collection pan, and start hydration of oil in hydration cylinder, then filtration with the centrifugal filter. The oil after filtration can be bottled.

 

The press machine and multifunctional oil filter can be used in combination or separately for single use.

YZYX120ZHWK is the three steps press combined oil press, the pressure is stronger, with which user can obtain more excellent economic benefits.

 

Main Features of YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press

Below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking, and cooking, etc.

Oil Plants

Processing Capacity(t/24h)

Oil content of
Dry cakes
(%)

Oil yield
efficiency
(%)

Electricity consumption(kW·h/t)

Rapeseed

≥6.5

≤7.6

≥82

≤40

Cotton seeds

≥6.5

≤6.8

≥77

-

Soybean

≥5.5

≤6.5

≥67

≤56

Groundnut

≥6.5

≤6.5

≥92.3

≤39

 

The day capacity (t/24h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.

 

Applicable oil plants and Business of YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press

  1.  More than 30 types of oil plants, such as rapeseed, cottonseed, soybean, shelled peanut, flax seed, sunflower seed, and palm kernel, etc.
  2.  Uses in oil factory, oil mill, and privates oil production workshop.
  3.  Good both for pressing raw oil material and roasted oil material.
  4.  Performs well both in cold pressing and hot pressing.
  5.  The lower residue oil of the dry cake.

 

The product conforms to the "Technology Standard of Agricultural Spiral Oil Press" under JB/T9793-2013 of the People's Republic of China.8466524478?profile=original

Read more…

The industries using high frequency plastic welding machine are as following:

 

Processing a thermal welding sealing such as:  blister sealing, PVC plastic blister sealing, PVC blister welding, PVC plastic bubble shell, battery sealed packing sealing, hardware tools, PETG blister sealing, blister cardboard sealing, U disk sealing packing sealing, memory chips, PVC blister welding, high frequency plastic welding, HF plastic welder, high frequency plastic sealing, double blister sealing, PVC blister sealing double-sided, double-sided board blister sealing, cardboard blister sealing, plastic heat sealing welding, and so on.

 

Toy stationery industry: gift bags, basketball embossing, photo album, photo album, business card inside page, high frequency welding, mouse pad, mirror box welding embossing, etc.

 

Leather cases industry: leather, leather, leather welding, embossing, heat bonding, fuse, towel cases embossing;

 

Door mat carpet industry: PVC door mat embossing, door mat welding, plastic door mat embossing, carpet embossing, floor mat welding, floor mat embossing, cushion embossing, s-type cushion welding, electric vehicle cushion embossing, cushion welding, locomotive cushion, cushion welding, etc.;

 

Automotive interior products industry: automotive steering wheel cover, anti-lattice thermal bonding, reflective paste thermal bonding, reflective film thermal bonding, automotive cushion, cushion, pad welding, backrest, pad embossing, etc.;

 

Other industries: life jacket, rafting boat, rafting boat, floating row, curtain, shower curtain, inflatable pool, swimming pool, health mattress, jade mattress, inflatable mattress, inflatable sofa, wire harness, water capsule and other high cycle welding molding!

 

Buy hf machine on hf-weld.com!8466528462?profile=original

Read more…

The automatic temperature controlled integrated oil press is built up with electricity controlling part, electric frying part, and auto heating & squeezing system, vacuum filtrating system.

The electrical frying part mainly consists of an electrical heating device, insulating material, frying pan, and churn, etc.

The auto heating and squeezing department mainly consists of heating part, squeeze cage part and squeeze spiral part etc.

The vacuum filtration department mainly consists of electromotor, vacuum pump, oil and gas separator urn, valve, vacuum pipe etc.

 

"Guangxin" brand is a top brand for oil press machines. The manufacturer Sichuan Guangxin Machinery of Grain and Oil Processing Co., Ltd, has always been in the top techniques and markets. It has been exported to over 80 countries in the world and looks forward to establishing long term cooperation with users, distributors and trade companies worldwide.

 

The integrated screw oil press machine is a new advanced designed model which suits for high-grade oil materials like the shelled peanut, sunflower seeds, and sesame etc. The machine has the advantages of easy operation and high oil yield. Customers can get clean oil from this model.8466524900?profile=original

Read more…

Oil Press Machine

As a professional of screw oil press machine, Guangxin has designed for various needs of oil press machines from the customers worldwide. The brand "Guangxin" oil press has always been highly admired since its foundation. The main product, screw oil press, used to press oil from various oil plants, with different functions combined with the oil press machine.

 

Guangxin manufacturer has a professional technical service team, providing timely and comprehensive guidance and service for customers. As a strong brand for screw oil press, Guangxin has been kept on upgrading technology in the past 20 years, which is the promise to users, also a responsibility of Guangxin stuff. Adhering to the goal of "produce the better oil press for making better quality oil" leads Guangxin oil press into the world.

 

Guangxin Oil Press Category

Oil Press Machine By Raw Materials

 

Guangxin hot oil press machine is suitable for the oil extraction of various raw materials including rapeseed, castor, coconut, corn, cottonseed, mustard, flaxseed, sesame, peanut, palm, soybean, sunflower, walnut, cashew, hazelnut, hemp, jatropha, neem, moringa, etc. Contact our experts, our professional technicians will help you choose a suitable oil press machine for you according to your demands.

Oil Press Machine By Size

 

Guangxin oil press is able to satisfy small, medium, and large production capacity. Choose according to your requirement. Or contact us, our techinicians will help you.

 

Oil Press Machine By Temperature

 

Cold pressed oil is the edible vegetable oil produced by pressing oil at a low temperature (40-60℃). The cold pressed oil is better in color. But the cold press oil press is less fragrant. Cold pressed oil does not foam when it is eaten, and is suitable for frying.

 

Hot pressed oil is a product oil formed by physical pressing after high temperature (120-130℃) frying. The vegetable oils consumed in our daily life are mostly hot pressed oil. The hot pressing features high oil output and simple operation. The hot oil is pure and fragrant, especially the oil of sesame and peanuts, which are rich in oil and more fragrant.

 

Guangxin oil press machine China is suitable for both cold oil pressing and hot oil pressing.

8466524478?profile=original

Read more…

PS Foam Food Container Production Line

PS foam food container production line is mainly used to produce PS foam food container, that is, disposable foam plastic food container, which refers to polystyrene resin as raw material, which is heated and melted in the extruder and then foamed. The agent (butane) and the like are subjected to extrusion drawing, and after the sheet is wound up, it is placed in a ventilated and humid environment and then subjected to secondary heating and blister molding, and various food-making utensils such as a snack box and a soup bowl are prepared. Instant noodle bowls, fresh trays, etc.

f:id:lkhongrun:20190817223134j:plain

Features of PS Foam Food Container Production Line
The PS foam food container machine production line produced by Hongrun Machinery includes PS foam sheet extruder, PS foam food container automatic forming and cutting machine, and PS foam material recycling granulator. Different production lines can be combined according to the needs of different customers. Medium-sized conventional production lines can reach 150-200kg/h, which is also the most popular production line.

The robotic PS foam food container automatic forming and cutting machine developed by our company is based on PS foam food container has the advantages of heat preservation (1 - 2 hours), pressure resistance (3 kg is not easy to deform), light weight (about 5 grams of fast food box) and cheap (about 8 cents per meal box).

 

 

 

Read more…

ECT For Automotive And Aerosapce

Eddy current testing technology has been widely used in the detection of metal components in the automotive and aerospace industry. In order to ensure the flight safety of the aircraft, the relevant components must be periodically inspected. The eddy current technology is usually used to detect aero-engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the aircraft, landing gear, wheels and aluminum skin as the aerospace non destructive testing. And subsurface defects, and used to detect defects in the wing joint weld.  In the detection, it can effectively suppress the shaking of the probe, and the material is uneven and cause interference signals. Metal magnetic memory testing technology can be used to diagnose the stress concentration of the above components or early damage.

f:id:bkneddy:20190812173432j:plain

Due to the complex geometry of the auto parts, the equipment is required to have a high level of materials and complicated materials, requiring diverse equipment and high precision. In addition, the production of auto parts is a large industrial production, with certain beat monitoring requirements, and only by reducing the testing costs, can we reduce the automobile production and improve the competitiveness in the domestic and foreign markets. With the development of the national economy, the automobile industry has become a pillar industry in China. Therefore, non-destructive testing technology for eddy current flaw detectors for automotive parts is also receiving increasing attention from manufacturers and researchers. At present, the most widely used ndt machine in the detection of automotive parts is the eddy current flaw detector ultrasonic testing method. In the ultrasonic flaw detection of eddy current flaw detectors at home and abroad, the most used type A ultrasonic flaw detector. It adopts A-type ultrasonic display, which has the advantages of simple and cheap equipment, can locate and quantify defects, and is widely used in production inspection.

f:id:bkneddy:20190812174536j:plain

However, its flaw detection results are not intuitive, no record, difficult to detect, and many human factors. Seriously affect the reliability of detection. Due to the continuous development of computer technology and electronic devices, the digital acquisition and analysis of the ultrasonic signal of the eddy current flaw detector become possible, the waveform can be recorded and preserved, and the ultrasonic detection of the eddy current flaw detector is positive digital signal processing and imaging direction development. Super-generation image technology is a remarkable new technology. The ultrasonic image of the object can provide intuitively and a large amount of information, directly reflecting the acoustic and mechanical properties of the object, and can also evaluate the mechanical properties of the microstructure of the solid material. Suddenly macroscopic discontinuities. In short, the aviation ndt services for automotive parts eddy current flaw detector will develop with the advancement of modern high-tech, to the direction of intelligence, automation and imaging, in order to adapt to the rapid development of modern automobile manufacturing industrial parts quality inspection, testing requirements.

 

f:id:bkneddy:20190812174531j:plain

Read more…

Company Introduction

Dongguan Yiheda Automation Co.,Ltd established in 2010 and registered capital of the company is 360 million RMB. There are 1700 staff in the company and more than 110 members in development team.

In the upstream supply chain of automation equipment, Yiheda FA division, aluminum profile division and precision manufacturing division have built a complete automation industry chain, therefore, Yiheda can provide customers with the best automation solutions, the highest cost-effective machine, the shortest delivery time and the best service.

Since its founding, customers group of Yiheda automation cover almost all industries in the manufacturing industry. Especially in the low voltage electrical, automotive, mobile phone, home appliances and electronics industries, Yiheda has accumulated a wealth of experience and earn customers' trust. 

Yiheda automation, one of the leading custom automation companies in China, specialize in designing and manufacturing the custom automation solution to customers. The filed we are expert in :
1. Automated Assembly Equipment
2. Automated Test Equipment including Appearance inspection, Inner and Outer Diameters Inspection, Functional Inspection, Vision Inspection, Hardness Inspection, Air Tightness Inspection, etc.
3. Automatic Welding Equipment
4. Automatic Riveting Equipment
5. Special Purpose Equipment
6. Factory Automation Design and Upgrading

The enterprise culture:
To make staff happy! To touch the customers! To satisfy the shareholders! To make contribute to the society!

Read more…

🔥Christian Music News