Blogs/News/PSAs

News / Sigma Announce Firmware Update v2.0 For Sigma fp

Sigma have announced firmware version 2.0 for the Sigma fp, bringing major updates including the ability to create and play back cinemagraphs and supporting HDR in movie shooting.

26 Jun 2020 9:17AM by ePHOTOzine |  Sigma fp in Mirrorless Cameras

Sigma has announced firmware update 2.0 for the Sigma fp full-frame mirrorless camera. The update includes functions that had been planned but were not available at the fp’s launch, and come in addition to the benefits announced in March 2020.

Everything included in the update is as follows:

Newly introduced functionality

Supports cinemagraph creation and playback

Supports CinemaDNG footage playback

Supports still capture during live view and movie shooting in Cine mode

Supports still image capture from movie files (CinemaDNG, MOV) shot with the SIGMA fp

Supports HDR in movie shooting

Supports still and movie shooting in Director's Viewfinder mode

Supports DCI 4K 12bit / HDMI Raw output

Supports RAW over HDMI recording with Atomos Ninja V monitor-recorder * A free AtomOS firmware update for Ninja V is required.

Supports recording Blackmagic RAW codec over HDMI with Blackmagic Video Assist 12G models * Requires firmware update of Video Assist 12G models using Video Assist Update 3.3.

Camera movement control is now compatible with ZHIYUN Weebill S gimbal.  * Firmware update of the corresponding device is required. * Please refer to ZHIYUN firmware release information about functions supported. Since not all functions will be supported in this firmware update, both SIGMA and ZHIYUN will need to continue working on this to make more and more functions compatible in future firmware updates.

Instruction message appears when attempting to use greyed-out items in SHOOT menu

Supports camera control in USB mode * The SDK (Software Development Kit) for controlling the camera is scheduled to be available by early July.

Enhanced/modified functionality

Supports Dual Base ISO (ISO100 and ISO3200)

Improves AF performance

Improves accuracy with evaluative exposure metering

Improves image quality

Supports CinemaDNG 25 and 29.97 fps (UHD 12bit) shooting

Supports CinemaDNG 100 fps (FHD 12bit) shooting

Supports CinemaDNG 100 and 119.88 fps (FHD 8bit and 10bit) shooting

‘OFF’ option available in Color mode

Exposure adjustment available in QS (Quick Set)

Tone control setting ‘Auto (Mild / Strong)’ available during movie shooting

Supports USB Video Class (UVC) settings adjustments while the fp is connected to USB

Supports time code generation

Compatible with BWF format

Supports file size changes at aspect ratio 7:6

Supports changes to shutter sound effect

Bug corrections

Corrects the phenomenon of flickering in dark areas when shooting video footage

Corrects bugs in USB Video Class (UVC) setting when connected via USB or during movie shooting

Improves recording stability with recording media

Other minor bugs have been corrected

* To develop raw data (DNG files) from the SIGMA fp with firmware Ver2.0, the use of SIGMA Photo Pro 6.7.4 is required. Users must update to SIGMA Photo Pro 6.7.4 when applying the fp Ver2.0 firmware update.

Support this site by making a Donation, purchasing Plus Membership, or shopping with one of our affiliates: Amazon UK, Amazon US, Amazon CA, ebay UK, WEX

It doesn't cost you anything extra when you use these links, but it does support the site, helping keep ePHOTOzine free to use, thank you.

Because of the bad working environment, hull to corrosion by seawater chemical corrosion, electrochemical corrosion and marine organisms and microorganisms; hull under high wave and alternating load; the ship shape processing method of complex factors such as, so the steel hull structure strict requirements. First of all, good toughness is the most critical requirement. Besides, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the ship inspection department. The strength grade of the structural steel used in the hull is divided into the general strength structural steel and the high strength structural steel according to the minimum yield point. Hull structural steel is divided into two kinds: general strength and high strength steel. The general strength steel is divided into four grades according to the quality: A, B, D and E. The high-strength steel is divided into two strength grades and three quality grades; AH32, DH32, EH32, AH36, DH36 and EH36.

The standard strength steel of China Classification Society is divided into four quality grades: A, B, C and D, namely, CCSA, CCSB, CCSC and CCSD. The high strength structural steel regulated by China Classification Society is three strength grade and four quality grade.

Classification according to the classification society, there are ABS, LR, GL, DNV, BV, NK, KR, RINA, CCS, etc.

The American Bureau of American Bureau of shipping (ABS, full name: American Bureau of Shipping) was founded in 1862, is a non-governmental organization, mainly dedicated to the public interest and the needs of customers, through the standard construction and operation design, development and validation of ocean related facilities, protection of life and property and environmental safety. The prominent feature of the ABS is to carry out the inspection of the US Navy's small and medium combat warships and military auxiliary ships.

So far, ABS's business scope to ships, marine engineering, boiler and pressure vessel, petroleum and chemical industry, power plant facilities, railway and port facilities, ship equipment and container inspection business, at the same time, also carried out around 14000, 18000, ISO9000 certification, SA8000, BSCI etc.. According to the ABS, the 2009 entry level ship was innovating high, reaching a total of 159 million 500 thousand tons. Robert D Sommerville, chairman and chief executive of the American classification society, described 2009 as the "very strong year of the growth of the entry level ships" by the American classification society. The first quarter of 2010 the United States CCS class ships continued strong growth, by the end of March reached a total of 162 million tons. In 2009 - during the recent great depression of the shipbuilding market, the U. S. ship class entry level ships exceeded 10 million tons, only 5% over the same period.

ABS Shanghai, Dalian, Guangzhou three big station, the other station belonging to three station management. ABS China's sites are all managed by Hongkong, with the Yokohama head office and the ABS Asia Pacific headquarters in Singapore.

ABS certification is a certificate issued by the ABS.

The British Lloyd (Lloyd 's Register of Shipping LR), also translated as Britain's Lloyd society is a society, the world's oldest, the large and long history in the world shipbuilding industry renowned, ship industry certification authority is internationally recognized, also has a good reputation in the industry, other aspects of the project.

It is mainly engaged in the formulation and publication of ship standards, the inspection of ships, the verification of ship energy, and the publication of shipbuilding rules. There are offices or surveyors in ports in many countries. It has been involved in the amendment of the ISO9000 standard and the amendment of the accreditation regulations. There are more than 30 representative offices all over the world, recruiting auditors and accreditation work in the local area.

It is controlled by a committee. It consists of representatives from shipowners, ships and machine manufacturers, steelmakers, insurers, London Insurance Association and shipowners' Association, as well as the technical committee of the Royal ship design and Construction Association.

Germanischer Lloyd (GL) was founded in 1867, is one of the world's largest and oldest society, is the world's leading all kinds of container ship classification society, more than 30% of global container fleet and almost half of the container by Germanischer Lloyd certification. The German Lloyd has more than 400 offices in more than 120 countries in the world, with more than 2000 employees. The German Lloyd since 1875, from the German prime minister to the Ministry of foreign affairs and the Ministry of transport, has been actively supporting the GL business, and the federal government as a special technology organization and attention.

Norway DET NORSKE VERITAS was founded in 1864. Its headquarters is located in Oslo, Norway capital. It is a leading professional risk management agency in the world, aiming at safeguarding life and property safety and protecting the environment. DNV provides all kinds of risk management and comprehensive evaluation and certification services for customers, mainly related to the classification of service, certification services, technical services, set up about 300 branches in 100 countries worldwide, more than 9000 employees worldwide, from 85 different countries and regions.

Veritas (Bureau Veritas, Bureau Veritas, Veritas group, France International Shipping Association), Bureau Veritas, referred to as BV, was founded in 1828, headquartered in Paris, is one of the International Association of classification societies 12 formal members, one of the world's leading certification inspection group.

Contact us for the information of the shipbuilding steel plate price!

Are you looking for reliable 4140 steel plate suppliers? Mould steel plate is a kind of steel used to make mould of cold stamping mould, hot forging mould, casting mould and so on. Mold material is the material and technological foundation of die and mould manufacturing, and the die steel is the traditional die material. Its varieties, specifications and quality play a decisive role in mold performance, service life and manufacturing cycle. The use of the 4140 steel sheet   is very wide, the manufacture of the mold material is very wide, and the most widely used die material is the mold steel.

Categories of mould Steel making process

Cold stamping mould

Cold stamping mould is mainly used to make cold stamping mould steel in a cold state. The scope of cold stamping mould steel is very wide, ranging from various carbon tool steels, alloy tool steels, high speed tool steels to powdered high speed tool steels and powdered high alloy steels. Cold stamping mould steel is a vacuum degassed refined steel, pure in the endogenous, good in machinability, significantly improved metal cutting. excellent wear resistance, good toughness, available made of stainless steel and high hardness material stamping die.

Hot forging mould

Hot forging mould is mainly used to make the mould steel under high temperature conditions. Common hot forging mould steels include alloy steels with medium and high carbon. Hot forging mould steels with special requirements are sometimes made of high-alloy austenitic heat-resistant mould steels.

ASTM A36/A36M Standard Specification for Carbon Structural Steel

ASTM A36 / A36M standard specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. ASTM A36 / A36M Standard main steel grade:A36 carton steel.

 ASTM A36 / A36M description

ASTM a36 steel plate is a type of weldable carbon engineering structural steel. Its carbon content is usually less than 0.25%, higher than ordinary carbon structural steel yield point σs or yield strength σ0.2 (30 ~ 80kgf/mm2) and yield ratio σs/σb (0.65 ~ 0.95), it’s better in the hot and cold machinability, good weldability, low cold and brittle tendency, notch and aging sensitivity, as well as better resistance to atmospheric, seawater and other corrosion. Its low content of alloying elements, generally below 2.5%, is used after hot rolling or after simple heat treatment (non-tempered state); ASTM A36 carbon steel is widely used in bridges, rivets, bolt structures, and other structural elements including drilling rigs, electric shovels, electric drive wheels, anti-landmine vehicles, mining vehicles, excavators, loaders.

Related role of ASTM A36/A36M

At present, the new low alloy high strength steels are characterized by low carbon (≤0.1%) and low sulfur (≤0.015%). The commonly used alloying elements can be classified according to their role in the strengthening mechanism of the steel: solid solution strengthening elements (Mn, Si, Al, Cr, Ni, Mo, Cu, etc.); refinement of grain elements (Al, Nb, V) , Ti, N, etc.); precipitation hardening elements (Nb, V, Ti, etc.) and transformation hardening elements (Mn, Si, Mo, etc.) (see strengthening of metals).

C; The formation of pearlite in the steel or dispersed alloy carbide precipitation, so that the steel is strengthened, can greatly improve the steel's toughness and welding performance.

Mn; High Mn/C ratio is good for improving steel yield strength and impact toughness. Si; Most low-alloy high-strength steels do not require silicon alloying, but silicon is an indispensable additive element in hot-rolled ferritic-martensite multiphase steels.

Mo; molybdenum-containing steel (~0.15%Mo) has higher strength and higher toughness than conventional ferrite-pearlite steel. Nb, V, Ti; 0.05-0.15% Nb (or V, Ti) is added to low-carbon manganese steel or low-carbon manganese-molybdenum steel, which has obvious grain refinement and precipitation hardening effects. Titanium forms sulfides in steel, improving the anisotropy and cold formability of the impact absorption work.

Rare earth (RE); trace (about 0.001%) rare earth metals do not affect the strength of the steel. Its main function is desulfurization, reducing the anisotropy of toughness and preventing the layered tear of steel.

Other elements such as Ni, Cr, Cu, etc., are not very effective in solid solution hardening in microalloyed steels, and are generally controlled at lower content ranges in non-quenched and tempered steels.

To learn more about the a36 steel plate price , please contact us!

QINGGONG MACHINER with KT series high-performance turbines, it has blasting wheels provided with eight throwing blades locked into the wheel double-disc. The double-disc wheel offers the following advantages:

Abrasive

Abrasive, the blasting materials, it depends on what kind of material you need to blast cleaning, this is the first things first for the blasting media' choice. We have steel shot, steel grit, and steel cut wire shot.

Advantages of abrasive

Uniform particle size, good cleaning effect, low dust, low hollow, tight internal structure, high wear resistance, high life, moderate hardness, good strength

As one of the most professional shot blasting equipment manufacturers in China, QINGGONG MACHINERY’s activity is the design, manufacture, sales of automatic roller shot blasting machine, sandblasting room and punching machine and over more than 40 years of experience. Our company has shot blasting machine spare parts. And the shot blasting prices are reasonale and competitive. RFQ today!

Pipe blasting equipment suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors.

Pipe outer wall shot blasting machine

Pipe outer wall shot blasting machine, also known as the diabolo shot blasting machine.

Steel pipe shot blasting machine moves through the machine on skew roller conveyors. Such form of the conveyor provides simultaneous rotation and transition movement of the pipes through the machine, which can achieve evenly blasted surface. KT series turbines made from wear-resistant materials, with power from 5.5 to 45kw provide efficient and quality shot blasting. The shot blasting part of the machine’s robust housing is protected by wear-resistant shields made from manganese steel. Entry and exit seals chamber with a series of rubber screens keep the abrasive inside the machine. Screw conveyor, an elevator and sand cleaner provide returning and continuing cleaning of the abrasive. Standard equipment includes PLC Siemens, display, automatic or manual mode, automatic start-up of turbines, working-hours counter, variable frequency drive of the cylinder drive, etc. Machines may be built into highly productive lines for basic color application, including drying chamber, automatic coloring chamber and drying tunnel.

Pipe Shot Blasting Machine Parameter:

Pipe inner wall shot blasting machine

A complete system includes Moveable Front and rear Chamber, Left & Right Hydraulic Moveable Blast Wheel, Belt conveyors, Bucket Elevator, Platform, Abrasive Separator, Dust Collector, Blast Wheel Moving Mechanism, Hydraulic Loading, and Unloading System and Control Panel.

We design the loading mechanism as Inclined Rail Type. When the pipe reaches to the work position, the moveable sealing chambers move inside droved by the cylinder. Both of the ports of the pipe are sealing. Then start the dust collector system, abrasive recovery system, and moveable blast wheel. The large airflow dust collector system we designed not only can dedusting but also recovery the abrasive during the blasting operation. After finish, off the feeder and blast wheel, then the moveable blast wheel mechanism out the pipe. The moveable sealing chambers move outside. Pull out the pipe used the pull mechanism on the trolley, then the pipe roll down the unloading conveyor automatic. There also have a vacuum recovery machine at the unloading conveyor to the abrasives remnant in the pipe. One operating cycle is finished.

As one of the most professional shot blasting machine suppliers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

Paver shot blasting machine is mainly used for surface roughening treatment of marbles, granites, concrete products, and natural stone. It provides twin advantage foremost subject field end provides outstanding appearance as a result of the rough surface and therefore the exposed aggregates. Second "roughened" surface has excellent non-slip properties.

Pavers Shot Blasting Machine Basic Specification

QGS Series Roller Conveyor Type for Pavers Length ≥60cm

QGP Series Rubber belt Type for Pavers Length ≤60cm

The working principle of the paver shot blasting machine:

Marble shot blasting machine is predominantly used to blast marbles, granites, concrete blocks to create an improved aesthetic appearance, taking out cement and making styling attributes such as granite chips visible. The working principle: different sized abrasive, thrown by the rapidly rotating blast wheel, is accelerated towards the surface being prepared. The huge impact force of the abrasive quickly etches a unique three-dimensional character of the surface. The products processed in this way have a high-quality surface appearance without overlapped and dead zone, it also has high production efficiency and low cost. Comparison with the old power blader and singeing process method, it has higher efficiency and lower cost, and if connected to our dust collector, the dust and contaminants will be recycled automatically at a very low dust emission level, which complies with EU environmental standards.

The concrete block/stone shot blasting machine can be integrated into a production line due to its modern control system with the relevant interfaces, different belt lengths and well-coordinated transfer stations (e.g. sheets or rollers).

Advantage of paver shot blasting machine:

1.Speed adjustment of conveyor and blast wheels is controlled through an Inverter.

2.The number and the position of the blast wheels can change depending on the geometry, customer requirement and on the workpieces, such as only the blasting of the upper side, or need to blast lateral side.

3.With proper regulated control and type of shot used in the shot blast machine, it is possible to produce different surface finishes to produce an "antique" effect on marble stones and ‘bush-hammering's effect on cement products.

All paver shot blasting machine with Blow-off station. After blasting, a blow-off station with a high-pressure blower removes the shot from the surface of the concrete blocks/stone. The nozzles are adjustable in height and therefore adaptable for the treatment of different concrete block/stone sizes.

As one of the most professionalshot blasting manufacturers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

Semi-welded laser interchangeable plate heat exchanger allows the use of special media on one side of the laser welding, and the other side using gaskets. This allows certain special requirements where both media are unable to use the same type.

Specifications

Maximum capacity: 600m³ / h

Maximum design pressure: 25bar

Maximum design temperature: 150 ℃

Plate material: 304, 316, 316L, Titanium, Hasetlloy

Advantage

Accessen are a genuine original plate heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producting 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

FAQ

Inquiry request？

Please contact Accessen export office. For the most accurate quotation, please prepare the following data:

Duty, Type of media, Pressure drop, Flow rate, Working pressure, Thermodynamic properties, Temperature, Working temperature.

Which certificates are available for the heat exchangers?

ASME, ISO, AHRI, BV, DNV etc... Case by case certificate was allowed.

Accessen Gasket Plate Heat Exchanger utilize clip on the gasket and advanced designs that optimize performance. We provide efficient heat transfer in compact equipment with a small footprint. Most important of all, they reduce your operating costs and save you money. The heat exchanger has a flexible design and service-friendly ensure that even the largest PHE can be serviced and maintained rapidly and easily by one person using standard tools. The product range is extremely wide up to 60 different models. We also have the special plate design for your specific needs.

AHRI

AHRI performance certificationThe Air Conditioning, Heating, and Refrigeration Institute (AHRI) certification is an independent, third-party verification of thermal performance. Through its certification program and standards, AHRI strives to help customers save energy, improve their productivity and help to ensure a better environment.

(accessen)

Benefits

Improved distribution area allows fluid flow to be even.

The optimal combination of H and L plates can make use of pressure drop at the maximum limit.

Eliminates the scaling area.

Higher turbulent flow due to the corrugated design, hence improving the heat transfer coefficient.

Self-lock devices on the corners of the plate ensure proper fastening.

Standard roof and leakage proof design of gaskets ensures the durability of the gaskets.

Clip-on gaskets without adhesives.

Main Features

Accessen is a genuine original plate heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producing 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

Specifications

Maximum processing capacity: 5,000m³/h

Minimum temperature difference: 0.5-1℃

Maximum design pressure: 25bar

Maximum design temperature: 200℃

Maximum heat load: 60MW

Plate materials: AISI 304, 316, 316L, TI, SMO254

Advantage

Accessen are a genuine original plate type heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producting 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

FAQ

Inquiry request？

Please contact Accessen export office. For the most accurate quotation, please prepare the following data:

Duty, Type of media, Pressure drop, Flow rate, Working pressure, Thermodynamic properties, Temperature, Working temperature.

Which certificates are available for the heat exchangers?

ASME, ISO, AHRI, BV, DNV etc... Case by case certificate was allowed.