🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

wood (16)

The introduction of the advantages of wood plastic composite decking floor:

 

  1. Long service life: The service life of wood plastic composite decking flooris three to four times higher than that of ordinary wood, that is to say, it can be used for 10 to 50 years. It has a long use time, so the wood plastic composite decking floor is more cost-effective naturally.

 

  1. Loss is lower than wood: the use of wood in then wood plastic composite decking floor is less than the ordinary wood under the same conditions. And wood plastic composite decking floor is mostly hollow specifications, which can save more production materials. At the same time, the cost of the hollow sheet is lower, and the price will be more favorable. Hollow profiles also have the advantage of reducing their own weight and load-bearing capacity. These are the advantages of wood plastic composite decking floor, while the ordinary wood can not do.

 

 

  1. Maintenance cost is low: the performance of common solid wood needs to be protected by painting, and some protective paint is also applied in subsequent use, otherwise, it will affect the service life. The wood plastic composite decking floor does not need this process, and it can be used after processing. It does not need painting, and the waterproof performance is also very good. Maintenance costs are much lower than wood products.

 

 

  1. Environmental protection products can also be reprocessed: wood plastic composite decking floor use eco-wood, environment protection wood, and is renewable, and does not contain toxic substances, and can be processed. The products can be sawn, planed, bonded, fixed with nails or screw, etc. The installation is very convenient.

 

  1. Exterior color diversity: It has a natural texture of wood, and can also achieve personalized modeling, and has diverse product color, and will not produce cracks, warping, deformation during the, and also has no wood scar.

 

WPC PRODUCTS FAMILY

Sundi is one of the leading wpc products manufacturers in china. China WPC is easy to process, with high surface hardness, water resistance and corrosion resistance, long service life, wide application range, and can be customized. Sundi WPC products can change their density, strength and other characteristics through additives, and can also meet special requirements such as anti-aging, anti-static, and flame retardant. Most importantly, wood plastic composite China is an environmentally friendly product that can be recycled.

 

Although We have dedicated ourselves to high-performance WPC decking for 10 years, there is no end on technology and performance, we treat every client as our long cooperation friend, to decorate your yard and make it more beautiful, to make your WPC decking projects stable and more attractive.

8466755688?profile=original

Read more…

Although plastic wood railings are more expensive than pure wood railings, their relatively high costs are gradually decreasing as manufacturers find more efficient processing methods. The use of recycled plastics in composite materials can further reduce costs. Even in the face of the current cost structure, many consumers are still willing to accept relatively high prices because of the advantages of these composite materials.

 

 

 

Advantages of plastic wood railings:

 

(1) Plastic wood railings can be waterproof and moisture-proof. The problem that wood products are easy to rot, expand and deform after absorbing water in wet and multi-water environments is solved. It can be used in environments where traditional wood products can not be applied.

 

 

 

(2) Plastic wood railings can prevent insects and termites, effectively eliminate pest harassment and prolong service life.

 

 

 

(3) There are many colors to choose from. It has both natural wood texture and wood texture, and you can customize the color according to your personality.

 

 

 

(4) Plastic wood railings have strong plasticity, which can easily realize personalized modeling and fully embody personalized style.

 

 

 

(5) Plastic wood railings are environmentally friendly, pollution-free, pollution-free and recyclable. The product does not contain benzene, and the formaldehyde content is 0.2, which is lower than the EO grade standard. It is the European grade environmental protection standard. It can be recycled, which saves the use of wood greatly. It is suitable for the national policy of sustainable development and benefits society.

 

 

 

(6) Plastic wood railings have high fire resistance. It can be an effective flame retardant. The fire protection level reaches B1 level. It extinguishes in case of fire and does not produce any toxic gases.

 

 

 

(7) Plastic wood railings have good workability. They can be ordered, planed, sawed, drilled and painted.

 

 

 

(8) Plastic wood railings are easy to install, convenient to construct and do not need complicated construction technology, saving installation time and cost.

 

 

 

(9) Plastic wood railings do not crack, expand, deform, and need no maintenance. It is easy to clean and saves later maintenance and maintenance costs.

 

 

 

(10)Plastic wood railings have a good sound absorption effect and good energy-saving, making indoor energy-saving up to 30%.

 

WPC PRODUCTS FAMILY

Sundi is one of the leading wpc products manufacturers in China. China WPC is easy to process, with high surface hardness, water resistance and corrosion resistance, long service life, wide application range, and can be customized. Sundi WPC products can change their density, strength and other characteristics through additives, and can also meet special requirements such as anti-aging, anti-static, and flame retardant. Most importantly, wood plastic composite China is an environmentally friendly product that can be recycled.

8466524077?profile=original

Read more…
  1. Too much Cost - The Greatest Challenge Faced by ultra modern prefab homes for sale

Compared with the traditional cast-in-place construction mode, the cost of assembly construction mode increases or decreases in different links, and the cost increases in most parts. Prefabricated buildings are built with prefabricated components. Although the cost of some site construction is reduced, such as reinforcing steel and concrete works, masonry works, measures and plastering works, there are incremental costs in the design, production and installation of assembly buildings to varying degrees. With the increase of prefabrication rate, the cost per square metre will increase accordingly.

 

  1. Looking for a market - making cost growth affordable in the short term

Build houses in parts of fixed house prices, using assembled buildings. Even if the cost is only higher than the traditional cast-in-place method, the higher cost is still the unacceptable cost increase in the housing sales market (developers or consumers). Where the housing price is above a certain level, the effect of policy promotion is more obvious. It is the target market of prefabricated housing sales enterprises.

 

  1. Clear future - ultra modern prefab homes for sale enterprises firm future direction

In the future, the attraction of the construction industry to the new generation of migrant workers is declining with the increasing cost of labor and the aging population. The construction and security cost of traditional cast-in-place construction will increase slowly. With the promotion of scale and efficiency of assembled construction, the comprehensive advantages of cost-effectiveness of construction methods will gradually emerge, and the cost of ultra modern prefab homes for sale will undoubtedly become lower and lower.

 

We are the most professional wood plastic composite manufacturers in china, RFQ today!

 8466523096?profile=original

Read more…

DIY for your own third living space

 8466708684?profile=original

The rapid development of social economy has promoted the great changes of people's life style. Entertainment has become an important part of people's life, but now more and more people tired of being a noisy, tensing and chaotic place but prefer to stay in a quiet, relaxing and private place.

Why don’t do it yourself, create one for yourself? Neither digging nor drilling, firstly you just need measure the area of your balcony and how many deck tiles do you need, then fit our Oakio wood plastic composite deck tiles together in your balcony, then you will get a nice as well as functional outdoor living place at low cost, you can sit on a rocking chair to see the sunset or invite your friends to have a BBQ party etc. This outdoor space not only make you enjoy your spare time, but also requires barely maintenance or painting, which is very convenient.

WPC is wood plastic composite which is widely used in outdoor place such as hotel, park, cafe, swimming pool etc, and also commonly used in family balcony or terrace. Compared with timber decking, WPC products have real wood appearance but no need for oiling or painting,  stain-proof, mildew and mold proof, no cracking. And don’t worry about the quality of our product, it uses the finest in recycled wood and plastic to deliver the highest-quality product to homeowners, and it is 100% recyclable, leaving no carbon footprint.

Our DIY composite deck tile are an affordable solution for your home. They are beautifully designed with an interlocking systems which makes it more easily assemble. These systems are easy to install and don't require a skilled contractor. If you want to remove them, just need to take them apart.

Oakio’s composite deck tile can be used for patios, balcony, swimming pool and so on. We offer two outstanding performance collections of deck tile which is Iniwood deck tile, Proshield deck tile. Both of them use the oak wood fiber for the core while other composite manufacturer used mixed wood fiber.

Iniwood WPC deck tile material is stable and resistant to saltwater, with exceptional resistance to UV exposure, Iniwood WPC deck tile’s outstanding performance is matched with a 15 years warranty. Offering exceptional benefits over other materials, Iniwood WPC deck tile will not rot, crack, splinter or rust, and will require no painting or oiling.

Proshield WPC deck tile by Oakio is made by co-extrusion, we create a layer around the WPC core to protect the surface. The layer is a kind of mixed multi plastic with additive like UV stabilizer, coupling agent, anti-oxidant and so on. Proshield WPC deck tile is ultra UV resistant, scratch resistant, mold resistant and stain resistant, the maintenance is quite low.

Oakio products are not only affordable and maintenance free, but eco-friendly too. All of our composite wood boards products are made up of recycled timber, high-density polypropylene, UV stabilizers and bonding additions. These materials combined together and create an exceptional, durable composite product, repelling moisture offering a completely maintenance free product.  The waste renewable and natural fibers that is used is perfect for environmentally conscious customers, looking to reduce their carbon footprint and environmental impact.

Read more…

WOOD RECYCLING MACHINE

Where to buy wood recycling machine?

In ROTECHO you will see complete wood recycling solutions which covers household and industrial scale. All those solutions aim to recycle waste wood into different engineered-wood products with extensive market prospect by extruding and hot pressing technology. The raw material can be sawdust, wood shavings, wood chips, used pallet, tree branches, used wood package, yarn trimming, wood residues from timber plant or furniture factory, etc. In the recycling production, all the materials will be processed into proper size and moisture by our special designed wood chipper, crusher and chip dryer, then get high-valued wood products by different wood press machine.

 

In order to help you choose the suitable machine, we divided our wood recycling machine     into three types on the basis of different characters of final product and industry.

  1. BIOMASS FUEL:

Our biomass wood pellet mill is specially designed to convert various wood waste and agriculture waste into biomass fuel pellet, it is renewable energy in replace of fossil fuel and coal, which is widely used in home warming, fireplace and power plant, etc.

  1. PACKING AND TRANSPORTATION: 

Include wood sawdust block making machine and compressed wood pallet machine/production line. Wood sawdust block making machine can make sawdust blocks/log/feet as the vertical supporting nailed into wooden pallets, features with free fumigation, water proof and high density with 550-650kg/m³. Compressed wood pallet machine/production line is used to make one-time forming molded non-fumigation pallets, which can greatly save transportation cost and packing cost, it's the ideal alternative of raw wood pallet while its loading capacity range from 1.5-4T. 

  1. HOME DECORATION AND BUILDING: 

Our particleboard and MDF manufacturing plant can help you to get qualified wood-based panels for further veneer processing or directly sold as decoration and building materials. The only difference between them is the board structure and investment cost.

If you have any confusion about the raw material, recycling manufacturing process or final product, please contact us freely for the confirmation.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of industrial recycling machines. RFQ today!

 8466671084?profile=original

Read more…

Tire Debeader

Tire category:all kinds of tires, such as car tires, passenger tires, truck tires, agriculture tires etc.

Configuration:semi-automatic and full automatic

Drive mode:mechanical rotate and hydraulic pulling force

Feeding type:manual feeding and conveyor feeding

Working efficiency:500 kg/h-3000 kg/h

Power:5.5 kw, 11 kw, 15 kw

Electricity:380v, 50hz, can be customized freely.

NOTE:Rotecho's tire debeader can draw the steel wire without damage.


Introduction

Tire bead wire remover machine also named as tire wire drawing machine and tire wire separator and tire steel wire extractor and tire bead wire remover. As known that a complete tire includes rich metal wire inside, in order to improve the rubber granule & powder productivity and prolong the lifespan of the cutting knives in the further process, we should remove the bead wire from the waste tire firstly. Rotecho offer semi-automatic and automatic tire debeading machine for the market, the specific debeading proposal will depends on tires category, required working efficiency and investment budget ect.

  1. Semi-automatic tire debeader: use the double roller rotate principle to get complete and clean steel wire.
  2. Automatic tire debeader: hydraulic design, use the oil cylinder cycling movement generate a pulling force to draw out the steel wire.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of recycling solutions ltd. RFQ today!

 8466675055?profile=original

Read more…

Semi-automatic Tyre Cutting Machine

Tire category:car tires, passenger tires and truck tires

Configuration: Semi-automatic

Working efficiency:1T/H

Tire diameter required:Less than 1200mm

Cutting size:40-60mm rubber blocks or bigger rubber chunks, can be customized.

Electricity:380v, 50hz, can be customized freely

NOTE:This is the primary step in waste tire recycling process, we also provide fully automatic whole tire shredding machine for option.


Introduction

As the first step in the whole tire cutting system, tire cutting process aims to recycle nylon tires and steel tires into rubber chunks or blocks as request. After times’ practice and improvement, we introduce this economical tire cutting system configuration in the market, which will reduce the original investment and improvement efficiency significantly in the waste tire recycling production. We provide semi-automatic tire cutting systems and automatic tire shredder in stationary and mobile type , both of them are perfect match for rubber recycling plant, such as tire granule production, rubber powder production and tire oil pyrolysis production. Each type of tire cutter will complete unique work in your waste tire recycling plant.

 

Our semi-automatic whole tire cutting system include four different machines:

  1. Tire sidewall cutter: cut the tire bead from whole tires.
  2. Tire tread cutter: cut the tire crown and sidewall into long strips for further treatment.
  3. Tire blocks/slice cutter: cut the tire strips into 50-60mm rubber blocks, the cutting size can be adjusted by changing the cutting blades quantities.
  4. Tire bead remover: extract the steel wire from tire bead.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of recycling machines. RFQ today!

8466674488?profile=original

Read more…

Sawdust Wood Pallet Block Press Machine

Rotecho's pallet logs hot press machine is specially designed for pressing sawdust, wood shavings and other wood scraps into pallet blocks by heating and extruding system.

Raw material application:Small logs, tree branches, sawdust, wood chips, timber residue, log off-cuts, plywood trimmings, old board, etc.

Block density:550-650kg/m³

Block Feature:Free fumigation, water-proof, high nail holding ability, formaldehyde release conform to national standard, eco-friendly.

NOTE:We supply both single machine and complete production line.


Sawdust Block Press Machine Introduction

Rotecho’s wood pallet block extrusion    is crucial in the pallet block/feet/leg manufacturing. The advanced horizontal hydraulic system pressure can reach up to 10MPA within a short time to press the feedstock tightly to get a qualified block. Rotecho can provide the singe sawdust pallet block making machine or the complete block production line for different scale production. Generally the whole production line are mainly consist of wood crusher, dryer, glue blender, block press machine and block cutting machine, each section will make a big different to determine the final block quality.

  1. Crushing section: The crusher will crush all the wood materials into proper size.
  2. Drying section: Material moisture content will be reduced at 8-12%, we have airflow dryer or rotary dryer for option.
  3. Glue blending section: Special designed mixing device can get the uniform blended material.
  4. Hot pressing section: The blended material will be fed into the feeding port of press machine and get the extruded blocks with high-strength. There is no limit on the block length, but generally it will be cut into 1m or 1.2m in this stop.
  5. Block cutting section: Cut the 1m/1.2m blocks into required size by cutting machine or by hand.


Feature of Wood Sawdust Pallet Block Machine

  1. Compared with molded pallet and wood based panel production, blocks making have the advantage of low-investment and wide application in wood waste recycling industry;
  2. Rotecho could customize the block mould size within the range from 60mm to 147mm, in addition, one pressing machine can make two block size each time;
  3. Compact hydraulic system enables it get a block with density of 550-650kg/m³;
  4. Uniformly heating can solidify the glue within a short time to make a high-strength blocks;
  5. Easy to operate, low maintenance cost and low energy consumption.


Final Pressed Wood Pallet Blocks

As an engineered wood-waste products, the final pallet blocks have many amazing advantages. They have smooth surface, high nail holding ability and good water proof (no cracking soaked in water for 48 hours and exposed to the sun and wind), free of fumigation and formaldehyde release conform to national standard. With all these benefits, currently pallet blocks are widely used in wooden packing and logistics industry, it’s an ideal replacement for raw wood made blocks.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of waste recycling machine. RFQ today!

 8466670898?profile=original

Read more…

Pulp Molding Machine

Configuration:semi-automatic and fully automatic configuration

Raw material:scrap paper, waste cardboard, newspaper, sugarcane pulp, bamboo pulp, bagasse pulp board, rice stalk pulp, reed pulp etc.

Final product:bottle tray, wine tray, inner package tray, disposable medical urinal tray, paper bed pan, seeding tray, fruit container, garden pot, cosmetic packaging, food container, egg & fruit package, corner cushion, egg crate, egg carton, tableware, lunch box etc.

Mould type:ABS made, Aluminium made, copper made (mold type depends on the product character, we provide customize service.)

NOTE:We have a series of moulded pulp forming machine for market, detailed solutions will be offered by your specific requirements.


Paper corner cushion molding machine INTRODUCTION

We can see pulp molding as a vertical mold process, which use paper pulp and fiber pulp as raw material, undergo a series of different molding process to get a certain product. It is the different product structure design that determine special molding machine to complete the shaping, ROTECHO share with you three popular types molding here. 

* Transfer molding: 

Transfer molding type uses two pieces of mould to complete the process, the first one use the vacuum to form the wet mold in the pulp tank, the second is to transfer wet mold product to dryer procedure. We provide tumblet type and rotary type transfer molding machine for different productivity requirement. Tumblet type is mainly used in small scale plant with sun-drying to complete a production line. Rotary type also means drum-type forming, which has 4, 8, 12 panels that installed with forming mould. It shares the same working principle with tumblet molding, but it can work continuously with brick kiln dryer or metal frame dryer to realize the large scale production. 

* Reciprocate molding:

Reciprocating molding is also known as thick-wall molding, that mainly applied in industrial package pulp molding process, for there is only one mould finish the molding, so the finished product surface is moderately smooth, while the opposite is coarse. Therefore, a type of hydraulic hot press machine is necessary in this pulp production line to make the product more durable and bearing ability. On the other hand, vertical direction molding process enable the pulp forming machine more flexible in the product structure adjustment.

* Thermoformed molding: 

Thermoformed molding also name with“cure in the mold”to produce well-defined and smooth surfaced product from the fiber pulp. It is special designed to make tableware, bowl, lunch box, dish etc, which is similar with the reciprocate molding. Inject the slurry in forming mold with high precision, as forming mold lift up it will remove redundant water, upper mould will press it again. Once formed, the product is captured to heated to get a further densify molded product, trimming and sterilization process is necessary before the packing.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of industrial recycling machines. RFQ today!

 8466675072?profile=original

Read more…

Pressed Wood Pallet Production Line

As a professional wood pallet production line manufacturer, Rotecho's automatic wood pallet production line is the most efficient & cost-saving way to convert wood and agriculture wastes into one-time forming molded wood pallets, which is widely used in packing and logistics industry.

Raw material:wood branches, timber scraps, used pallets, sawdust, rice husk, straw, reed, coconut fiber, palm fiber, bamboo, chemical fiber, plastic scraps, etc.

Pressed wood pallet feature:free fumigation; it's one-time forming pallet, there is no need to use nailing machine; the loading capacity range is from 1.5T to 4T. 

NOTE: We Supply Single machine, whole pallet production line and turn-key solutions.


MOLDED WOOD PALLET MANUFACTURING PROCESS

Rotecho has the semi-automatic and fully-automatic configuration for the market option. Meanwhile, we can provide a customized proposal based on the raw material state and final pallet requirements, our professional manufacturing technology ensures you to get a pallet with higher loading capacity and longer service cycle.

 

  1. Raw Material Preparation: This is the first step to process your wood materials into proper size, the related machine is drum chipper and wood crusher.
  2. Drying Section: You can get the dried materials with moisture range from 3% to 5%, the heating source can be firewood, natural gas, diesel etc.
  3. Glue Blending Section: The material will be mixed with urea-formaldehyde glue evenly, as for the glue consumption, it's decided by your material conditions.
  4. Pallet Pressing: The qualified pallet will be formed from this step.

ACCESSORY EQUIPMENT

  1. Optional: Belt Conveyor, Screw Conveyor, Cyclone, Silo, Dust Remover, Feeding Device, Pallet Discharging Device etc
  2. Necessary: Hot-oil boiler.


ADVANTAGE OF presswood pallet making machine

  1. Batching system can weight the wood material and glue in high precision, which guarantee the final pallet quality in the original.
  2. Material distribution system can realize remote control within 300m,which designed with rotate charging to guarantee the precision operation.
  3. The mixed material can be filled into the pallet press machine automatically by auto feeding device, the redundant material will be left to refill the second batch. This innovate technology reduces labor cost and material loss dramatically compared with the common type in market.
  4. The whole production line devices with PCL control system, which monitor the production and greatly improve the working efficiency.
  5. Low energy consumption and pollution-free to our environment.

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of recycling solutions ltd. RFQ today!

 8466674267?profile=original

Read more…

Wood Recycling

Diversified wood recycling is highly beneficial and old timber can be used without felling of more trees, it can also reduce the need for new landfills, maintain air quality, reduce green house effect and soil erosion, meanwhile it plays an important role in circular economy, especially with the development of logistics, wooden packing and board industry. But it's a pity that there are billions tons of waste wood and timber are discarded and wasted all over the world every year. In Rotecho's view, wood is one of the precious gift from the nature, in most all wood's forms after use within manufacturing process is no longer a waste but resource where it is a revenue generator to a business. At industrial scale, waste wood can be converted to a wide variety of secondary products and all these products have widely application and good market prospect.


WHAT WE CAN DO FOR YOU?

As a manufacturer in wood processing industry since 1998, we have mature technology and rich experience in wood recycling solution, we know the waste wood characters exactly and can optimize the recycling value with lower investment and higher benefit. Rotecho provide stand-alone machinery, complete production line and turn-key project for small and industrial scale user. In addition, we also supply the service for retrofitting your existing facility, there will be one you are interested in.


Wood Pellet Machine

Wood pellet machine is designed with flat-die technology to make biomass pellets with high heating value, which is widely used as fuel in power plant, boiler factory and household furnace warming. It's the great helper for your household waste and agricultural waste.


Wood Sawdust Block Making Machine

Wood sawdust block making machine is used to make pallet blocks/feet/logs which can be nailed into whole pallets for supporting purpose. The final block is very strong and durable with 550-650kg/m³ density to realize the higher loading capacity.


Compressed Wood Pallet Production Line

Compressed wood pallet production line is specially designed to produce one-time forming compressed wood pallet from wood, agricluture and other rich fiber content wastes. The final pallet is free of fumigation and higher loading capacity range from 1.5-4T. 


Particleboard manufacturing plant

Particleboard manufacturing plant uses wood waste as raw material to produce particle board by chipping, crushing, drying, pressing, trimming and sanding process, the final board has a widely application, such as furniture, decorator, flooring, outdoor engineering etc.


MDF Board Manufacturing Plant

MDF Board manufacturing plant can process the waste wood into wood fibers, with the assist of special glue and heating pressure to create a tight bonding board with smooth surface. Its density is higher than particle board. 


22 YEARS’ HISTORY
100% Manufacturer
Overwhelming superiority in PRICE
Concentrate on wood/paper/plastic/tire recycling


CUSTOMIZED SOLUTION
Single machine
Complete recycling line
Whole turn-key solution
Retrofit existing facilities


POWERFUL TEAM
Engineers: Over 15 years' experience in designing, welding and installation.
Marketing: over 12 years' experience
Complete service system

 

Thanks to 22 years' experience in manufacturing industrial and the incessant technological research aimed at improving and perfecting productive processes have stimulated Rotecho to step forward constantly, to the point of becoming a leader in the industry of recycling machines. RFQ today!

 8466674694?profile=original

Read more…

ELECNC-1325 AUTO FEEDING FURNITURE PRODUCTION LINE

Equipped with a pushing device, this machine can automatically pushes the plate off the processing table, which is convenient for the operator to take the material. With the double-station equipment and uninterrupted processing, which can greatly saving time and realize maximum productivity. In addition, the machine can achieve an optimized layout to achieve the processing of shaped materials, so that the sheet utilization rate is as high as 95%.

 

ELECNC-1325 cnc machine for wood furniture Features:

Good effect of processsing:High precision , cutting material very smoothly , Automatic design , automatic classification, without human intervention.

Improve work efficiency:Auto feeding materials, automatic layout optimization , improve material utilization. and this is one of the typical features of Wooden Furniture CNC.

Save working time:Automatic feeding , save the time of labor , no human intervention , minimizing error rate to minimum , ensure the quality of the order.

User friendly Machine control interface design. Workers can operate the machine expertly just by simple training.

 

ELECNC-1325 Auto Feeding Furniture Production Line Parameter:

Travelling size

2500x1260x200mm

Working size

2440x1240x50mm

Table size

2440x1250mm

Table Surface

Vacuum absorption Table

Load & unload speed

15m / min

X, Y Structure

Helical Rack gear, Taiwan Hiwin/PMI Rail Linear Bearings

From Structure

Taiwan TBI Ball Screw Taiwan Hiwin/PMI Rail Linear Bearings

Spindle power

9.0kw Italy HSD ATC air cooling spindle

Spindle speed

0-24000rpm / min

Travelling speed

45m / min

Working speed

20m / min

Tool magazine

Armless

Drive Motors

Japan YASKAWA

Working Voltage

AC380V/50/60Hz,3PH

Control System

Taiwan SYNTEC control system

Software Compatibility

Type3 Software, (Option: Artcam Software

Running Environment Temperature

0 – 45 Centigrade

 

ELECNC-1325 Auto Feeding Furniture Production Line Sample & Application

Wood furniture industry: Doors; Cabinets; Tables; Chairs.Wave plate, fine pattern, antique furniture, wooden door, screen, craft sash, composite gates, cupboard doors, interior doors, sofa legs, headboards and so on.

Advertising industry: Signage; Logo; Badges; Display board; Meeting sign board; Billboard Advertising filed, sign making, acrylic engraving and cutting, crystal word making, blaster molding, and other advertising materials derivatives making.

 

BLUE ELEPHANT is an enterprise with high-advanced technology, specializing in the r&d and manufacturing of nesting cnc machine. If you want to know more details or want a quotation, just feel free to contact us!8466665070?profile=original8466665262?profile=original8466664300?profile=original8466665093?profile=original8466665473?profile=original

Read more…

Tie

Do you want to buy concrete railway sleepers or want to know the cement sleepers price? Our company is a concrete sleeper factory, and it is also one of the most professional concrete railway sleepers suppliers   in China.

A concrete sleeper (British English) or concrete tie (American English) is a type of concrete sleepers in railway tracks or railroad tie, less elastic, and consequently noisier than wooden sleepers as trains pass over them.

 

Concrete sleepers can be one piece of uniform or variable dimensions, used in high speed railway line constructions, generally railway sleepers transfer loads to the track ballast and sub-grade, hold the rails stable and keep them spaced to the correct gauge.

 

Advantages: It makes track more stable (particularly with changes in temperature), they can withstand fire hazards better than wooden sleepers, and need less maintenance, resulting in lower ongoing costs and fewer track closures. Furthermore, concrete sleepers are environmentally friendlier to some extent.

Prestressed Bridge Sleeper

Prestressed Mainline Sleeper

Prestressed Turnout Sleeper

Twin Block Concrete Sleeper

Concrete Tie Sleeper - German

 

Weihai Ruihe Railway Sleepers Co.,Ltd, as the well-known railway sleeper factory, has intensively collaborated on the railroad market at home and abroad. If you want to buy cheap sleepers, or you are looking for quality railway sleepers, don’t hesitate to contact.

 8466572669?profile=original

Read more…

WOODEN FURNITURE CNC

CNC routers for woodworking is also called Furniture Production Line ,based on the ordinary CNC router, and mainly used to deal with woodworking products. And it is a CNC solution for customized furniture production such as wardrobe, cabinets and office furniture . Especially with the function of fully automatic loading and unloading, it very popular in the furniture processing industry. Firstly ,The structure of the CNC router 1530 is exquisite, achieving a win-win of speed and precision. Secondly, with the vacuum adsorption table, it can process different shapes of plates. Then drilling and automatic tool change combination, can achieve drilling, pulling and other functions. Besides that with self-contained pusher device, it’s convenient for operators to take materials, saving time. It also has dual-station equipment, which can be used to maximize production efficiency.

 

We have wood router machine, RFQ today!

 8466539861?profile=original

Read more…

EPS STYROFOAM CNC ROUTER

EPS cnc foam carving adopts integrated casting machine body by well heat treated, which makes machine more stable, rigid, endurable. Adopting Imported high-precision ball screw and Taiwan HIWIN linear square rails, which ensure the machining precision. Especially with a wider travel distance, which is designed for large scale production and suitable for EPS, casting wood mold, engineering plastics and other non-metal material mold.

 

Blue Elephant EPS styrofoam cnc router with many optional configuration and service available. According to your requirement, different configurations of Foam Blue Elephant CNC Router will be offered. For example, the Z axis can be heighten, and the whole working size also can be customized.

 8466539494?profile=original

Read more…

MULTI HEAD CNC ROUTER

The multi head CNC router support spindle integrated control for multi-head from 2 to 8pcs, can delivery command to spindles to work in tandem, also can work similarly as blue elephant 1530 cnc router with an auto tool changer. When the first spindle complete its work, the second spindle can go on its own work automatically. This kind of multi head multi router woodworking can be determined based on machined material, and 3d engraving can also be achieved by equipping ordinary engraving machine with rotating axis. Multi head CNC router comes with various specifications to fit different customers’demands. And mainly used for mass production, such as embossing, art and wood-assembled toys, furniture art inlays and decorations, etc.

 

Blue Elephant multi spindle router can not only realize the processing requirements of multiple spindles working at the same time, but also meet the requirements of successive spindle work. A variety of options to meet any of your processing needs.

 8466542679?profile=original

Read more…

🔥Christian Music News