🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

duct (11)

Ultrasound Copper Duct Seamer

Ultrasound copper duct seamer is widely used in production enterprises of refrigerators, air conditioners, water dispensers and so on. The equipment can complete the welding and cutting process of copper pipe or aluminium pipe at the same time. It is easy to operate, has fast speed and no leakage after welding. In the refrigerator industry, ultrasonic technology has solved the problems of labor intensive and poor working environment. Compared with the fire welding process, the ultrasonic welding process can save 60% of the labor cost, without any welding environmental pollution, and save manufacturing and maintenance costs. The advantages of the equipment are compact appearance, humanized design, easy operation, easy assembly, easy maintenance and high welding efficiency.

 

Characteristics of ultrasonic copper duct seamer

Copper duct welding diameter is 0-12mm (0.8661 inches) without acetylene, flux, brass, solder. Preparations before sealing are minimal and labor saving is a simple process that ends in 1 second. The ultrasonic sealing has high programmability and reliability, and the sealing process is automatic operation. The duct seamer can be operated by one hand with the aid of balance crane, which is relatively simple. Pressure-height mode compensates for changes caused by changes in pipe material.

 

Low-cost investment and die replacement costs. Lightweight ergonomic design, durable welding force. It is easy to use integrated system and constant welding parameters which ensure the welding quality. It doesn't need skilled workers to operate. Mold replacement is simple and fast, and there is no need for re-calibration, reducing downtime 1 Division and production costs, and it is easy to install.

 

BLKMA is a company from China. Founded in 1994, it is located in Ma'anshan, Anhui Province, China. It is only 26 kilometers away from Nanjing Lukou International Airport. It has the developed transportation system so that our customers can visit at any time. In the heavy industrial machinery in China, BLKMA is the most authoritative modern enterprise, which participated in the national Chinese pipeline machinery industry standards. In recent years, it maintains a rapid growth in sales revenue and enterprise scale according to the technological innovation and the continuous development of global markets.

 

BLKMA Auto duct line And Spiral duct machine delievery to Australia

The order of Duct marking machine from an Australian customer was completed and shipped to Brisbane, Australia, after rigorous factory testing.

 8466763257?profile=original

Read more…

Duct Zipper

It’s assembly in one pass forms fold at the edges of rectangular or square channels and connects them to the castle. In the moment passage through the channel the machine in the still open seam can apply a special sealant for sealing products, as a result of which we get the airway rectangular section with dense hermetic seam.

 

The duct zipper machine body is a stable welded structure, bearing parts of which are made of sheet metal, which further strengthens the rigidity.

Duct Zipper Main Technical Parameters

Descriptions

Units

HF-I

HF-II

Thickness

mm

0.5~1.0

1.0~1.25

Min. Duct size

mm

100X100

200X200

Speed

m/min

15

15

Support height

mm

700

700

Support length

mm

1500

1500

No. of support arm

/

2X3

2X3

Working height

mm

800

800

Power

kw

5.5

5.5

Dimensions

mm

5350X1000X1000

5350X1000X1000

Weight

kg

710

710

MYT company has over 15 years of manufacturing and exporting experience in HVAC sheet metal bending machine,any needs in this aspect,please contact us!

8466713887?profile=original

Read more…

Beading Grooving Machine

Beading grooving machine(duct grooving machine) is a special type and a variety of thin plate ribbing machinery. After one-time forming rib or multiple rib forming, it can also replace the rolling wheel as needed to suppress the ideal rib shape. Widely used in construction, steam, ship, electrical kitchen utensils and air conditioning and ventilation duct manufacturing industry.

Beading Grooving Machine Features

When Beading grooving machine working, just adjust the pressure wheel to suppress the ideal curvature or angle, as well as the specific shape. The surface of the pressed workpiece is smooth, without scratches, and the strength and rigidity are greatly enhanced, which is an ideal material for all walks of life.

Beading Grooving Machine Main Technical Parameters

Model

With (mm)

Thickness  (mm)

Power(kW)

Weight

(kg )

Size (mm)

JPY-1.5*1300

1300

1.5

2.2

700

1550*1100*1050

MYT company has over 15 years of manufacturing and exporting experience in HVAC spiral duct machine,any needs in this aspect,please contact us!

8466715086?profile=original

Read more…

Aluminum Flexible Duct Machine

The aluminum flexible duct machine is mainly used to produce the flexible air duct from the aluminum strip by spiral forming with polyurethane glue. The material can be a plastic film, PVC material also. And the wire reinforcement can be optional for the inner core duct and outer jacket duct separately.

Aluminum Duct Machine Features

  • Changeable mould for different diameter from 80mm to 600mm

 

  • With or without wire reinforcement for both inner core duct and outer jacket duct.

 

  • Double layer with aluminum foil, metalized pet film, PVC tape will be suitable.

 

Aluminum Duct Making Machine  Main Technical Parameters

1

Diameter range

80-600mm (customized)

2

Duct length

Endless

3

Pure aluminum foil size

0.025-0.035 x 30-50mm

4

Forming speed

1-35m/min

5

Main motor power

1.5KW

6

Dimension

2200 x 850 x 1400 mm

7

Weight

500KG

MYT company has over 15 years of manufacturing and exporting experience in HVAC duct making machine,any needs in this aspect,please contact us!

8466715269?profile=original

Read more…

2020mm Spiral Duct Forming Machine

2020 spiral pipe making machine is driven by a sprocket, and the uncoiler and the main machine are integrated. The discharge rack has an automatic turning function, and the infrared sensor switch controls the cutting length.

2020mm Spiral Duct Forming Machine Features

Slitter /plasma cutting of the tubes to the preset length and required number of pieces.

  1. The cut to length is made by the patented slitter (no noise, no hot sparks created by the saw blade, no leaning of the cut edge). Modern industrial proof computer control.
  2. The electric drive ensures that even by using 2.0 mm strip coil the 2020 continually produces perfect, tight spiral tubes matching or surpassing the standards of DIN, BS, Euronorm and Smacna
  3. The perfect adapted options for making reinforcement beads, for the production of tendon sheet tubes or the automatic production of notches for the METU flanges, during the production process are further advantages of the tube former 2020.
  4. 2020 is the only machine for the fastidious customer.

 

2020mm Spiral Duct Forming Machine Main Technical Parameters

Diameter range

80 -2500mm Spiral tube former/spiral duct machine

Thickness of strip Spiral tube former/spiral duct machine / spiral forming machine

galvanised steel 0.4 -2.0mm

stainless steel 0.4-1.2mm

aluminium 0.4-2.0mm

Width of strip

Spiral tube former/spiral duct machine / spiral forming machine

Standard 137mm 0.4-1.0 mm

Standard 140mm 1.1-1.3 mm

Standard 150mm 1.4-2.0 mm

Cutting system

Plasma Cut flying slitter Spiral tube former/spiral duct machine

Motor power

22Kw

Weight

3200kg Spiral tube former / spiral duct machine

Dimension

2100 mm×1800 mm×1500mm

MYT company has over 15 years of manufacturing and exporting experience in HVAC auto duct line,any needs in this aspect,we can provide spiral duct machine for sale,please contact us!

8466713298?profile=original

Read more…

HVAC Automatic Duct Production Line

MYT company has over 15 years of manufacturing and exporting experience in HVAC duct industry line and sheet metal bending machine. Our machines can be customized according to client requirements.

 

Description of HVAC Duct Automatic Duct Line

HVAC auto duct production line, which means some duct manufacture machines work automatic and achieve high efficiency.

 

MYT company helps customers to choose the most suitable air duct manufacture line machines for them. Auto duct production line includes auto duct line 2, auto duct line 3, auto duct line 4, straight auto duct line 5 and U shape auto duct line 5.

 

Features of HVAC auto duct line:

U shaped auto duct production line 5:Small footprint than straight auto duct line 5, working functions and Speed is same as straight auto duct production line 5.

 

Straight auto duct production line 5: This linear machine has four coils, including leveling, grooving/beading, angle punching, cutting, Pittsburgh lock forming, TDF flange forming and bending.

 

Auto duct production line 4: This duct manufacturing equipment can finish all steps before duct folding, including leveling, grooving/beading, angle punching, cutting, Pittsburgh lock forming and TDF flange forming.

 

Auto duct production line 3: The duct line 3 machine can complete metal sheet leveling, grooving/beading, angle punching, cutting and folding with CNC automatic system.

 

Auto duct production line 2: This duct line 2 machine is very economic and finish 4 steps, including leveling, grooving/beading, angle punching, and cutting.

8466714698?profile=original

Read more…

Maintenance

 8466713275?profile=original

  1. General Information

 

Regular cleaning including air duct cleaning and ventilation duct cleaning and maintenance can improve the performance of DurkeeSox system and guarantee the good indoor air quality and optimum air dispersion, different air dispersion model and working environment (dust capacity) decide the different period of cleaning and maintenance.

  1. Maintenance Period Description

 

Following is the advised maintenance period of general situation.

 

2.1 DurkeeSox—EJ 100% Eject without Permeation.

 

Made of non-porous fabric, and usually installed in higher space, So system cleaning and maintenance requirement is not an immediate concern. According to the different work environment requirements, general we suggest the cleaning period is three to five years.

 

2.2 DurkeeSox—PE Permeation with Injection

 

Made of less permeable fabric, most of airflow is distributed through orifices; fabric blockage is not our direct concern. Additional, the system is usually installed in higher space, According to different working status, general advised cleaning period is two to three years.

 

2.3 DurkeeSox—PS Permeation with Slots

 

Made of various permeation fabrics, part of air is distributed through fabric, and the system usually installed in lower space, so when it is discovered that fabric is seriously soiled and worked under lower efficiency, or there is obvious dust on the system surface, we need to clean system. According to different working conditions, general advised cleaning period is one to two years. In the cases of extreme dirty, the fabric may happen discolored as the cleaning.

 

2.4 DurkeeSox—PM 100% Permeation

 

Usually applications are in refrigerated, cooling system such as food processing, regular and effective maintenance is particular important. If the systems operating in dirty or soiled or long time without maintenance, it may results permeability failure or less life of system, According to the different working conditions, general advised cleaning period is every 3 months to half year is better. When cleaning, take down every part from suspended device, then turn out the dirty surface and washing.

 

  1. DurkeesoxMaintenance Procedures & Instruction

 

3.1 Remove DurkeeSox fabric ducts.

 

3.1.1 Firstly plan laundering time, making laundering schedule according to the drawing and jobsite situation.

 

3.1.2 After confirm the laundering schedule, arrange workers and tools which use for take off ducts. Checking the location and remove procedures of each DurkeeSox fabric duct according to the drawing, remember to mark as correctly for all the ducts to avoid missing remove or installation mistake.

 

3.1.3 Confirm AHUs turned off and DurkeeSox fabric duct is on the non-work state. Clear away for some sharp objects below or take the proper protection to avoid any potential damage to DurkeeSox fabric air ducts while removing.

 

3.1.4 Check the location of each zipper connection, from the inlet (The join part between metal ducts with DurkeeSox duct) to turn the zipper cover-up sleeve out and unfasten zipper, then retract fabric duct till to the next zipper unfastened to remove this part together, make the proper marks please! When take down to the end part please loosen the fixed snap clip and remove them together with endcap.

 

3.1.5 According to the above procedures, remove and wash ducts step by step as the laundering schedule.

 

  1. 2 Laundering Instruction:

 

3.2.1 Turn the dirty side out, soak in cold water 15 to 30 minutes without any softener;

 

3.2.2 Cold water washing (water temperature should less than 35℃), do not overexert to wrest.

 

3.2.3 Rinse thoroughly, and drip-dry or dry by airing in the shade, do not insolate to avoid any crimple or shrinkage by high temperature.

 

3.2.4 Serious dirty system might needs to clean more than once.

 

3.2.5 The laundering eligible standard is: surface clean without dusts, the accessories of zipper, hanger, etc are in good condition.

 

3.2.6 Big project maybe needs separate one maintenance to several laundering times, once finished one part, please carefully inspect and confirm the quantity according to the drawing, avoid missing laundering and losing!

 

  1. 3 Installation after washing.

 

3.3.1 Indentify all marks or labels of washed ducts according to the drawing.

 

3.3.2 Find out the DurkeeSox fabric ducts which need to install, hang the snap clip of ducts from the first section to the end section one by one, please to avoid any barrier to clamp snap.

 

3.3.3 Connected by zipper for each section as the correct order. To make sure all zippers covered by protection sleeve.

 

3.3.4 Straight the DurkeeSox system after installation and fixed the snap clip to the end part of to avoid fabric duct draw back.

 

3.3.5 Inspect the whole DurkeeSox system is straight and neat without damaged before starting work.

 

Remark:

 

To make laundering schedule do not take influence to owner’s normal working.

 

  1. Please refer to actually situation If any discrepancies between the drawing and actual situation.

 

  1. Please pay attention to ducts labels on the site of each zipper connection.

 

  1. The above methods are applied for the galvanized cable suspension, For the aluminum track suspension model is just slide out & into the end of DurkeeSox system will be ok!

 

  1. We suggest DurkeeSox detergent for exclusive use.

 

  1. For extremely dirty, it would be possible for little color change deepen during the laundering, we suggest to add M-efficiency diffuser or DurkeeSox fabric diffuser

 

  1. DurkeeSox System Storage Method

 

Please properly storage for DurkeeSox system in case of does not use for a long time to ensure the cleanness and extend the lifecycle of DurkeeSox system.

 

4.1 After stop using, Firstly to confirm whether the both inside & outside of DurkeeSox is clean, or launder it if necessary. (Please refer to the above laundering method).

 

4.2 Please remove DurkeeSox system as the procedures above. Please copy the marked drawing and save in the package.

 

4.3 Please pack & seal the removed ducts in time, and affix to instruction mark for the convenience of future installation.

 

4.4 Please count record in time to avoid lost after removed & packed DurkeeSox system.

 

4.5 Please keep DurkeeSox in the dry & ventilation environment. 4.6 Recheck DurkeeSox system before remove & preserve, check whether the surface of DurkeeSox is in good condition.

 

For any further questions, please call to your local distributor or our service line in China. 86-400-8822-068

Read more…

Installation

 8466713869?profile=original

Durkeesox integrate and streamline its production procedures in the factory,leaving the ventilation duct installation work that on-site worker can easily manage well.That contributes to easier hvac duct installation,lower cost and shorter construction time compared with that of traditional air duct.

 

Installation

Installation Type >>>

The installation of Durkeesox system is much easier than any conventional air duct system, which consists of 2 styles:

 

1.Cable suspension system.

 

  1. Aluminum track suspension system

 

Cable suspension system is more popular due to convenient installation and low cost. Which can be classified as following: By material: galvanized cable and stainless cable. By weight bearing capacity: ordinary cable and heavy duty cable. By rows of cables: single row, double rows and multiple rows. By suspension location: 12:00(single row), 2:00 &10:00 or 3:00 & 9:00 (double rows).

 

Aluminum Track Suspension System >>>

 

The materials required to install DurkeeSox air duct system includes: fabric air ducts, special fittings, components and accessories, which are supplied by the manufacturer (shipped with the consignment, including installation manual and assembly drawing, etc.). Other installation accessories required on site such as brackets, fastening bolts and others shall be purchased by the contractor.

 

After reading this, you can know how to install ac ductwork, how to install ductwork in ceiling, how to install hvac duct and how to install ventilation duct.

 

Read more…

Pneumatic Folding Machine

Model No.: CPF-1.2*1600,CPF-1.2*2000

Max Coil Width: 1600mm,2000mm

Minumum Fold Duct: 140*140mm

Thickness Range: 0.4-1.2mm(18-30Ga)

Min.Order Quantity: 1 Set

Supply Ability: 10 Sets per Month

Port: GUANGZHOU PORT,SHENZHEN PORT

Payment Terms: T/T,L/C

 

Pneumatic Duct Folding Machine Products Information

 

The TDF / GDF wrap brake is designed to allow a single operator to accurately place and fold flat blanks with TDF or GDF rollformed flanges into L-shape or full wrap duct sections.

 

COMIFO Group specializes in duct machines manufacturing, contracting and selling HVAC air conditioning equipments, HVAC machinery, valve and actuators,air duct machine,air duct manufacturing. Just contact us!

8466694287?profile=original8466695058?profile=original8466694660?profile=original

Read more…

Plasma Cutting Machine COMPA5100

Model No.: Compa1300*5100,Compa1500*5100

Table Size: 1300*5100mm,1500*5100mm

Speed: 0.5m/min

Max Coil Thickness: 6mm/12mm

Min.Order Quantity: 1 Set

Supply Ability: 10 Sets per Month

Port: GUANGZHOU PORT,SHENZHEN PORT

Payment Terms: T/T,L/C

 

Plasma Cutting Machine COMPA5100 Products Information

 

Comifo developed its own duct plasma cutting machine based on other famous manufactures’ advantages and markets’ requirements. There are two kinds of plasma cutting machines, duct fabricating plasma cutting machine and universal plasma cutting machine.The former can adopt further device for cutting glass wool and rubber heat-insulating material.

 

COMIFO Group specializes in air duct machines manufacturing, contracting and selling HVAC air conditioning equipments, HVAC machinery, valve and actuators,air duct machine,air duct manufacturing. Just contact us!

8466696288?profile=original8466696474?profile=original8466696655?profile=original8466696091?profile=original

Read more…

FTTH Terminal Box

The FTTH terminal box is made of ABS material and is a box for protecting optical fiber cable and pigtail welding at the termination of the optical cable, and is mainly used for straight-through force connection, branch connection of the indoor optical cable and fixing of the cable terminal, and functions as a pigtail disk storage and protection joint.

 

FTTH termination box is used in the end termination of drop cables in residential buildings and villas, to fix and splice with pigtails. FTTH terminal box can be installed on the wall and can adapt variety of optical connection styles.

 

Internal structure configuration instructions

Fiber fixing clip: fix incoming fiber cables;

Splice tray: used for welding and branching of optical fibers; the cover can be flipped, the disc can be stacked, the capacity is expanded, and the installation is extremely convenient.

 

UnitekFiber supplies various type of FTTH Terminal box. Our terminal box is including 2 ports, 4 ports, 8 ports, 16 ports, 24 ports, 48 port etc. With different design.

 8466564059?profile=original

Read more…

🔥Christian Music News