Blogs/News/PSAs

Efficient binding equipment enables enterprise of mobile cover photo printing machine to offer a more comprehensive service, faster process time and cost, with faster delivery times and lower costs from printing to finishing to delivery. Savings become a very powerful competitive weapon. And the current environment of the packaging industry also provides a prerequisite for the development of digital printing equipment.

1. Suitable product characteristics

From the development history of commercial printing, technology of mobile cover photo printing machine is the first to enter the packaging field, and will eventually evolve into one of the mainstream technologies. Commercial printing companies have a thorough understanding of the trend of mobile cover photo printing technology, so at first they realized that being the first one can create new opportunities. The high value-added, short version and other features have created high profits for the enterprise. When the traditional printing volume began to show a gradual decline, the mobile cover photo printing machine volume showed a steady increase.

The past of commercial printing companies is just like the packaging printing industry currently facing mobile cover photo printing machine. No need for plate making, short preparation times, fast job switching, and the ability to handle variable data and color excellence make this technology seem like a lot to offer.

High adaptability is a key factor in the successful occupation of the commercial printing market by mobile cover photo printing machinetechnology. This advantage is equally applicable to the packaging industry, especially the obvious features of a wide range of substrates, which can be easily handled in three areas: flexible packaging, cardboard and hard plastics. With the continuous advancement of mobile cover photo printing machine technology, the current solutions on the market can be successfully applied to the fields of film, plastic, folding carton and corrugated paper, and the processing of various thin papers is better than that of traditional flexibly printing machines. The challenges that early commercial printers faced when using mobile cover photo printing machine technology included workflow and post-press solutions. Today, many workflows and post-press manufacturers have introduced various solutions for both offset and mobile phone case printing systems.

2. Good basis for application

Just as commercial printing companies initially used mobile back cover photo printing machine technology to have a large number of reliable orders, some packaging companies that entered the mobile back cover photo printing machine  technology gradually began to see the benefits. With the continuous penetration of this technology in the packaging field, the advantages of the mobile back cover photo printing machine technology will be more obvious, and the performance of the workflow and the postpress system will be more stable.

Compared with commercial printing competitors, packaging and printing companies have mature, independent technology ten years ago. In terms of design capabilities, the current demand of brand sellers is more biased towards complex and efficient product design, which creates conditions for the development of mobile back cover photo printing machine technology in the packaging field. Commercial printing companies need to conduct long-term training for the sales team, and then persuade the customers to take advantage of the mobile phone shell printing machine to expand their business.

At the same time, when dealing with a variety of printing jobs, packaging and printing companies are more secure than commercial printing companies.
At present, long-distance printing is still the choice of most enterprises in the field of packaging and printing, but the opportunities brought by the short-term and fast switching of mobile back cover photo printing machine have been very clear. At the same time, flexibly presses provide high quality and high efficiency for long-run job printing, and thus set a new role in the future development. For many commercial printing companies, offset presses require a large number of orders to operate, but the profit margin is very low, so it is relatively difficult to create new growth points for the company.

Uses of Trichlorethylene products (TCE)

1. Cleaner

As a cleaning agent, it has a rapid development in the market of the cleaning of metal parts and electronic components market, mainly used in the various kinds of fields including color TV sets, refrigerators, cars, air conditioners, precision machinery and microelectronics industries for being used for cleaning metal parts and electronic components.

2. Chemical Intermediates

It is currently used for the consumption of chemical intermediate areas. The domestic industrialized downstream products of trichlorethylene include tetrachlorethylene, hexachloroethane, dichloroacetyl chloride, octachlorodipropylether, HFC-134a, etc. It is mainly driven by the production of HFC-134a. Owing to the rapid industrialization of domestic production of HFC-134a, the ratio of trichlorethylene in the consumption structure as chemical intermediates has increased substantially.

3. Other

As the solvent, extracting agent, its consumption is about 15% of total consumption, mainly used for the production of caprolactam, pesticides and pharmaceuticals. Pesticides with trichlorethylene as the solvent include trichlorfon and dimethoate which are popular pesticides in China. The application of trichloroethylene being used as the extractant agent for purification of the pharmaceutical intermediates-methoxy-phthalic acid has also increased largely in recent years.Application of trichlorethylene in other areas of consumption includes expanding agent, coating of unsaturated resin, which accounts for 5%; application of PCE and refrigeration agents accounts about 10%.

CAS NO.:79-01-6

Trichloroethylene (TCE) is hard to dissolve in water but soluble in ethanol, ether and so on. TCE is a flammable liquid that can cause fire and explosion when exposed to open flame or high heat.

Hazardous characteristics: In case of fire and high heat energy, TCE is likely to explode. It can react with strong oxidants. When exposed to ultraviolet light or decomposed during combustion or heating, toxic phosgene and corrosive hydrochloric acid fumes are generated.

Combustion (decomposition) products: carbon monoxide, carbon dioxide, hydrogen chloride, and phosgene.

TCE was used as an analgesic and a metal degreaser. It can also be used as an extracting agent, bactericide and refrigerant, and a clothing dry cleaner. Prolonged exposure can cause trigeminal nerve palsy and other illnesses. As an excellent solvent, it is used as a metal surface treatment agent, a cleaning agent before plating and painting, and a metal degreaser and extracting agent of fats, oils and paraffin. It is applied in the organic synthesis and pesticide production. TCE is used in the production of tetrachloroethylene as an anthelmintic and hexachloroethane as an anthelmintic for veterinary use. It is utilized in chemical cleaning and industrial degreasing, and as chemical raw materials.

 Invasion routes: by inhalation, ingestion, and percutaneous absorption.

 Respiratory protection: You should wears self-priming filter gas masks (half masks) when you may be exposed to TCE vapors. You should rescue oxygen breathing apparatus in emergency rescue or evacuation.

 Eye protection: Wear chemical safety glasses.

 Physical protection: Wear anti-poison infiltration workwear.

 Hand protection: Wear protective gloves.

 Others: No smoking, eating and drinking on job sites. After completing work, get bathed and have clothes changed. Store clothes that are contaminated with TCE alone as spare clothes. Pay attention to personal hygiene.

Uses of Trichloroethylene (TCE)

1. Cleaners

As a cleaning agent, it has a rapid development in the market of the cleaning of metal parts and electronic components market, mainly used in the various kinds of fields including color TV sets, refrigerators, cars, air conditioners, precision machinery and microelectronics industries for being used for cleaning metal parts and electronic components.

2. Chemical Intermediates

It is currently used for the consumption of chemical intermediate areas. The domestic industrialized downstream products of trichlorethylene include tetrachlorethylene, hexachloroethane, dichloroacetyl chloride, octachlorodipropylether, HFC-134a, etc. It is mainly driven by the production of HFC-134a. Owing to the rapid industrialization of domestic production of HFC-134a, the ratio of trichlorethylene in the consumption structure as chemical intermediates has increased substantially.

3. Others

As the solvent, extracting agent, its consumption is about 15% of total consumption, mainly used for the production of caprolactam, pesticides and pharmaceuticals. Pesticides with trichlorethylene as the solvent include trichlorfon and dimethoate which are popular pesticides in China. The application of trichloroethylene being used as the extractant agent for purification of the pharmaceutical intermediates-methoxy-phthalic acid has also increased largely in recent years.Application of trichloroethylene in other areas of consumption includes expanding agent, coating of unsaturated resin, which accounts for 5%; application of PCE and refrigeration agents accounts about 10%.

KH Paraffin Wax F64N/L/H

Features: Straight cut, Very low oil content, High purity, White color, Odorless

Applications: Polishes, PVC lubricants and Rubber processing, Package, Corrugated board coating, Controlled release of fertilizer, Textile, Candle blending

KH Paraffin Wax F66N/L/H

Features: Linear structure with less branches, Good hardness, Oder free

Applications: Hot melt adhesives, PVC processing and rubber processing, Paints and coatings, High-grade shoe polish, Textile, etc

KH Paraffin Wax 67H

Features: Narrow distribution of carbon, More percentage of linear molecular structures, Very low oil content, High purity, Oder free, While color

Applications: Hot Melt Adhesives, Paints and coatings, PVC lubricants, etc

KH Paraffin Wax S68N/L/H

Features: High melting point, Fine crystalline structure, White color, Oderless

Applications: Hot melt adhesives, PVC processing and rubber processing, Textile, Fertilizer,Explosive, etc

KH Paraffin Wax S70H

Features: High melting point, Fine crystalline structure, White color

Applications: Hot melt adhesives, PVC processing and rubber processing, Textile, Fertilizer,etc

Our waxes have been exported to Japan, Europe, North America, Brazil, New Zealand, and 20 other countries and regions throughout the world.

If you are wondering about how to melt paraffin wax for candles, don’t hesitate to contact.

Now science and technology have gradually covered our lives, and various machines have replaced the traditional labor force. Especially the emergence of automatic manipulators makes our life faster and more convenient. Next, I will introduce the advantages of using automatic manipulator.

1. It has a wide range of applications and it is unrestricted. The lathe automatic manipulator with good reputation has been added high technology to a certain degree of automation, making it perfect integration with mechanization. It can be seen in every field of our life. It can be used in the electronic industry to make various parts with complex structures. In the marine industry, it can accomplish things that we can not do by the labor force. In recent years, it has also been widely used in the field of biomedicine.

2. It can be applied in all kinds of environments. Trustworthy lathe automatic manipulator can not be limited by the environment. In some repetitive industries, their working environment is very bad, which brings great difficulties to the staff. Long-term single work can easily bring fatigue to employees, thereby reducing production efficiency, and the use of this automatic manipulator can be a good solution to this problem. It can efficiently duplicate work and it has greatly reduced the cost of our production at the same time.

3. Improve the safety factor. There are many working environments that are actually very dangerous. If we use all the labor force, accidents will inevitably occur. With the best lathe automatic manipulators, there is no need to worry about this problem any more. It can finish task more efficiently. Today, there are various accidents in the working environment, like collapse, which will not bring harm to the staff using trustworthy lathe automatic manipulators. For enterprises, the risk is reduced to a large extent.

4. It works more accurately and reduces errors. The lathe automatic manipulator with good quality can work uninterruptedly within 24 hours. We can achieve mass production only by setting accurate data on the equipment before work. The error is small. Lathe automatic manipulator makes our life better. In the future, the development of automatic manipulators will be better due to science and technology, and the scope of application will be wider.

Automatic Manipulators from YIHEDA AUTOMATION:

Transverse manipulator (with-multiple-grippers)

Transverse manipulator

Adjustable transfer PPU

U-type high-speed transfer PPUU

90 Degree Transfer PPU

Turntable linkage high-speed manipulator

Transverse manipulator

Grow Light Electronic Ballastssales@azgrowlight.com  +86-021-62609268

AZ electronic ballasts can work with a wide range of high pressure sodium (HPS) lamps and metal halide (MH) lamps to provide plants with supplemental light for better and faster growth, automatically converting between HPS lamps and MH lamps by micro-chip programming, with stable voltage output ensuring flicker free light. Electronic ballasts produce less heat, are quietly silent and have circuit protection built in. Compared to magnetic ballasts, electronic ballasts are more energy saving, more adjustable, more compact, and make the lifetime of the lamps longer for it can adjust the output to the lamp during its lifetime and has a soft start which put less stress on a lamp when starting it up.

Features of Grow Light Electronic Ballasts

Popular items among AZ electronic ballasts are 1000W & 600W with dimming (50%, 75% and 100% power level) and non-dimming models for your choice, manufactured with the highest quality components needed for the high output frequency. They feature a powder coated aluminum housing with finned body, which is good for heat dissipation and optimal cooling. AZ electronic ballasts can work with various kinds of supply voltages to cater for different markets and applications. Besides 120V/240V, we also supply electronic ballasts that can work with 400V in horticulture.

AZ electronic ballasts are very safe to use with end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection. In addition, our electronic ballasts feature high output, high efficiency, high power factor, low THD, no acoustic resonance and long lifetime, and comply with international standards and certified by CE and UL etc.

To achieve better performance and a longer lifetime, it's important that you use our electronic ballasts with high quality HID lamps and high reflectivity reflectors. Our ballasts can be mounted in any configuration like vertical, horizontal, and hanging to meet different applications.

If you want to buy electronic ballast, don’t hesitate to contact.

We provide a wide range of used somet textile machine Somet looms for sale, including models like SM92, SM93, THEMA11, THEMA11E and etc. The Somet rapier looms are all in good condition and performance. We always focus on quality when providing used Somet looms to our respected customers. 

8 Somet Super Excel 190cm Year 2000

The mechanical press machine working design principle of the mechanical power press is to convert the circular motion into a linear motion, and the main motor outputs the force to drive the flywheel. The clutch drives the gear, the crankshaft (or the eccentric gear), the connecting rod, etc. to achieve the linear motion of the slider. The motion of the motor to the connecting rod is a circular motion. There is a need for a circular motion and a linear motion transfer point between the connecting rod and the slider. The design has roughly two mechanisms, one is a spherical type and the other is a pin type (cylindrical type), and the circular motion is performed via this mechanism to a linear motion of the slider. The presses release the force on the material to plastically deform it to obtain the required shape and precision. Therefore, it is necessary to match a set of molds (dividing the upper mold and the lower mold), placing the material between them, and applying pressure by the machine to make it deformed, the reaction force caused by the force applied to the material during processing is absorbed by the mechanical body of the press.

Small oil press machine is a kind of oil press, whose output is not large. But it is simple and convenient. The main products are hydraulic oil press and screw oil press. The product is mainly used in the domestic processing oil. The current price of mini oil extractor is between 10,000 and 20,000.

Nine advantages of mini oil machine:

1. One-key-control, simple and easy;
2. Low speed and high torque dc motor, light noise;
3. Modular components, separate design, easy to disassemble and wash components.
4. Oil cup and slag cup: transparent PC raw materials, easy to clean oil, high-temperature resistance, and good impact resistance.
5. Housing: temperature resistant PC raw materials, excellent oil resistance, easy to clean.
6. Black crystal ceramic liner: enamel process, wear-resistant, high-temperature resistant, easy to clean.
7. Mixing blade: silica gel material, oil proof, and high-temperature resistance.
8. Press chamber and press bar: the raw material is 304 stainless steel, and no chemical reaction occurs during pressing.
9. Just press the button on both sides to remove the upper frame, and gently pull the pressure lever to separate. Remove and rinse the stainless steel components, which is easier than cleaning the soybean milk machine.

Maintenance of mini oil machine

(I) the lubrication should be checked after every 50 hours of work. The oil cup on the reducer should not be short of oil.

(II) The wet oil parts shall be prevented from the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If it is found to be deteriorated, all oil shall be replaced.

(III) When the amount of pressing is reduced and the oil output is out of order, the screw shaft shall be extracted, and the wear of the screw, the strip and the ring shall be checked, and the worn parts shall be replaced in time.

(IV) After each shift of work, the residual cakes in the machine shall be cleaned, and dust and grease on the machine surface shall be cleaned.

(V) After the end of the production season, long-term storage shall be conducted, followed by maintenance. Remove and re-grease the screw, strip and cake ring, and put them in the dry place.

PC Series Hammer Crusher

This impact hammer crusher is suitable for crushing minerals of various brittle materials. The crushed materials are coal, salt, chalk, gypsum, alum, bricks, tiles, limestone, etc. The compressive strength of the materials does not exceed 100 MPa.

The machine is mainly composed of frame, rotor, screen bar, hammer and other parts. The motor drives the rotor directly through the elastic coupling. Material is broken by the impact of the hammer head on the crushing plate when the rotor rotates.

We are a hammer crusher manufacturer with excellent products, don’t hesitate to contact.

Invisible Height Increase Heel Cushion Pad Insole.

By increasing the thickness of your shoe insole heel, the invisible increased insoles can make you become taller instantly unconsciously. Can effectively prevent your foot soles slipping inside your shoes, and increase the comfort of your shoes. Built-in shock absorption function.

The inner heightening insole is also increased, and the insole is also added, which is a kind of functional insole. The inner insole is mainly made up of a three-dimensional slope design: the heel is relatively high, and the direction of the forefoot is gradually lower. When you wear it, the height of the heel and the ground is raised, which creates a visual effect that the user's height becomes higher, and the image of the height is changed objectively.

 Material:

EVA increased insole

Memory foam/EVA increased insole

PU Sponge increased insole

TPR increased insole

Silicone Gel increased insole

CPU polyurethane heightened insole

 Size:

Half size pad heightening insole: that is, the height of the insole in half the size of the insole.

3/4 pad heightening insole: that is, the height of the insole in the size of the whole insole 3/4.

Full length insole in the whole pad: ie: increased insole size throughout the insole.

 Height:

Low position insole: increase 1.5---3.0cm.

The median heightened insole: increased by 3.0---4.5cm.

High position insole: increase by 4.5cm or more.

SEPLITE ®Enzyme Carriers

Enzyme carrier is a kind of Resin beads for Enzyme immobilization.

The resin enzyme catalysis technology mainly relies on the high efficiency and specificity of the enzyme. It usually catalyzes the reaction with the substrate in the form of a dilute solution in a free state, but the enzyme after the reaction is difficult to recover. To this end, people have invented enzyme immobilization technology to easily separate the enzyme. The enzyme immobilization technique is to immobilize the free enzyme on a solid support by physical or chemical means, and it needs to have the same activity as the free enzyme.

Compared with liquid enzyme, immobilized enzyme has some advantages when it is used for enzyme catalysis. For example, it is easy to be separated, possible to be utilized circularly, easy to control the reaction, enzyme concentration can be increased in reaction zone. Immobilized enzyme are widely applied in industries like bio-pharmaceutical and food processing.

Enzyme carriers are the most important matrix to fix enzyme of ion learning exchange. SEPLITE® LX 1000 series enzyme carriers can meet different requirements for immobilized enzyme with noteworthy features like larger pore volume, higher specific surface area, larger enzyme load, more active enzyme, better mechanical strength and more periodicity of circular usage. Up to now, LX 1000 have been successfully applied in manufacturing of 7ACA、6APA、7ADCA and amino acid.

Sunresin is the biggest enzyme carrier manufacturer in China, which greatly promote the industrial scale production of Chinese 7-ACA. The immobilized enzyme method solved the environmental problem caused by chemical method and greatly decreased the production cost of 7-ACA. Enzyme decomposition technology for 7-ACA was firstly supported by SR carriers which is the milestone in China 7-ACA industrial innovation.

Category List

SEPLITE ®LX 1000EP Enzyme Carrier With Epoxy Group

SEPLITE ® LX 1000HA Enzyme carrier with hexylamine group

SEPLITE ® LX 1000EA Enzyme Carrier With Ethylamine Group

SEPLITE ®LX 1000IDA Enzyme Carrier With Iminodiacetic Acidic Group

SEPLITE ® LX 1000ME Enzyme Carrier With Methyl Chloride Group

SEPLITE ® LX 1000HG Enzyme Carrier With Propanediol Group

SEPLITE ® LXC621 Enzyme Carrier for Lipase Immobilization

3-axis CNC router is an entry-level engraving machine that can meet machining requirements without high procurement and maintenance costs. As one of the basic type and best selling CNC router, it is easy to operate, and wide range of applications. Besides that the 3 axis cnc router machine is applicable to produce the cupboard door, solid wood door, computer table, panel furniture and so on. With the advantages of low-cost and wide usage, it is used for the works of high-density boards with large area and production, plane engraving, cutting, 3D carving, etc.

Blue Elephant CNC router 1530  working area and x, y, z working distance all can be set on your request. It is the best choice for processing non-metallic materials.

We have 3 axis cnc wood, RFQ today!

We can provide professional and smart solar pv remote monitoring system and products that can be Networked, Monitored, and Analyzed.

The Photovoltaic pv energy monitor collects and analyzes number of parameters being measured in a PV plant to monitor and/or evaluate its performance. In order to ensure the reliable and stable operation of any PV system, an effective monitoring system is essential. Moreover, the monitoring system keeps track on various electricity generation indices and fault occurrences.

As one of the well-known professional IoT solution provider for Solar monitoring system, DeviceBit has dedicated to provide the best, most comprehensive and cost-effective PV monitoring software and solar monitoring devices for the traditional industries. Featured with simple installation, easy operation and powerful IoT platform, DeviceBit enables customers to remotely monitor their solar systems anytime from anywhere, with minimized time and costs. DeviceBit contributes to ensure the effective uptime of PV systems and to reduce O&M (operation & maintenance) costs, and therefore maximizing yield and ROI (return on investment).

Linear Light Sensor, we also call it phototransistor. The chip integrated inside is very sensitive to light changes. So normally it is used to detect the current ambient light level and converts the light energy into an electrical signal output.

Compared with traditional photoresistors, light sensor is more environment friendly and complied with ROHS requirements. We can also make it to be SMD type with mini size. It is more and more popular now.

Senba will keep offering photosensitive resistance sensor with high quality.

Specifications of karate medals:

Material: Zinc Alloy

Plating: Antique Copper Plating

Process: Die Cast + Embossed Pattern & Text + Soft Enamel Coloring

Size: 45*45mm

Donghong is a professional maker of all kinds of sports medals since 1984. Our Strengths:

Excellent quality, competitive price, timely shipment, professional customer service, professional one stop solution service. We have karate medals for sale, welcome to contact us for cheap custom sports medals!

Swing arm garbage truck hopper: garbage hopper is a metal welded part, with two form---the open form and the sealed form. When the bulk cargo is loaded into the hopper, the suspension chain is hung, and the hopper can be lifted onto the crane by manipulating the swing arm. When unloading, the hopper is lifted by swing arm and unloaded by hanging chain at the next end after landing. The maximum tilt angle of hopper can reach 86 degrees.

Hydraulic operating system: It is composed of oil tank, oil pump, multi-way reversing valve, hydraulic cylinder, balance valve, hydraulic lock, oil filter and pipeline.

The whole system of the swing arm garbage truck is powered by the gearbox and the power extractor. Manual multi-way reversing valve controls the telescopic motion of the leg cylinder and the swing-arm cylinder. The displacement of the oil pump in this system can be controlled by manual throttle under the vehicle, and the stroke of the valve stem can be controlled by manual reversing valve handle. The system pressure can be set by the safety relief valve, and the system pressure will be overflowed by the safety relief valve when the system exceeds the set pressure. Operating system: The various functions will be transformed by the the system. Before operating the multi-way reversing valve, the oil pump should be driven by a power take-up device.

The expansion and loading and unloading of the legs can be accomplished by controlling the handle of the multi-way reversing valve in the swing arm garbage truck. By operating the throttle handle beside the multi-way reversing valve, the speed of the engine can be controlled, and the flow rate of the system can be adjusted to change the working speed of the mechanism. The first height control valve is used for front suspension control, which has two solenoid valves to control left and right air springs respectively. The second height control valve is used for rear suspension control, and two solenoid valves are also used. In order to prevent abnormal pressure in the air pipeline, a relief valve is used in the second height control valve.

Product Name: 150ml Body Wash Bottle

Material: PET Materials; Electrified aluminum materials

Capacity: 150ml

Slogan: The glass feels, high-grade and exquisite

The glass feels, high-grade and exquisite

 Introduction:

This 150ml plastic bottle is mainly made of PET materials, which are renewable materials, and have no burden on the environment, green and healthy. The body of the body wash bottle is specially thickened and has a glass-like feel when touched. The body wash bottle is cylindrical in shape and has a round shoulder design. The entire bottle looks round and beautiful, bringing the visual pleasure to the user.

The bottle cap of this body wash bottle is its biggest feature: the electroplating paint technology is used to make the bottle cap into gold or silver. The shimmering gold and silvery silver greatly enhance the grade of the product. The pump head is made of electrified aluminum materials and is translucent milky white. The pump head is a tip-pressing design, which makes the product easy to press and easy to use.

 Advantages:

The entire production process of the 150 ml plastic containers is carried out in a clean room, ensuring cleanliness and compliance with standards. The whole machine production is made to guarantee the quality and the inferior products will not enter the market. You may rest assured. This body wash bottle is mainly used for the packaging or sub packaging of body wash products. It is a very high-grade packaging in the care industry and is very popular among customers.

Compared with body wash bottles of the same price in the market, this kind of body wash bottle has a high cost performance, more advanced material and has a longer life. It's more prominent than other body wash bottles of the same type. In addition, we can provide various kinds of customization services, such as silk screen printing, frosting, engraving and so on. As long as you need, we can also print exquisite patterns on the bottle body to make you satisfied. If you choose this shower gel bottle, you won't regret it!

Details or Advantage

1. CANDID paper clip making machine has a safety cover, the cover can protect the operator when the machine running. The cover also can be removed if the worker wants to operate and maintain the equipment.

2. CANDID paper clip making machine has a working light, the operator could easy to operate the machine even at night. The light is not fixed, so if customers don't need it, they could remove it.

3. CANDID cheap price of paper clip making machine adopts two sets of straightening device, one set is vertical, the other one is horizontal. This device is used to guarantee the finished paper clip straight and smooth.

Description  

Paperclip is a small and useful tool which can help you clip documents or paper in your work life. Paperclip has a variety of shapes, such as round, triangle and so on. According to the thickness of paper, the size of paper clips is also different.

CANDID paper clip making machine is suitable for making various types of a paperclip with Nickel steel wire or PVC coated steel wire as raw materials. We can design paper clip making machine regarding different customer's requests. Paperclip making machine is a single machine, our customer just need a small place and can install it according to our video one by one. Meanwhile, it's easy to operate, one worker could operate two or three machines. 

CANDID paper clip making machine has already exported to many countries, such as Vietnam, Nepal, India, Russia, Algeria and so on. CANDID not just sell eraser machine, we also provide good service. If our customers have any problem, we will try our best to deal with it. Each customer is very satisfied with our machine quality and CANDID service.

We offer different kinds of Station Post Insulator for Substation, such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.

Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM etc.

We can supply different type of polymer station post insulators, also customer required.

The Introduction of Station Post Insulator

The station post insulator is a special insulation control that can play an important role in overhead transmission lines. In the early years, the station post insulators were mostly used for utility poles. Then it slowly developed into a high-voltage high-voltage wire connection tower with one end hanging a lot of suspended insulators. It was used to increase the creepage distance, usually made of silica gel or ceramic, called insulator.Insulators play two fundamental roles in overhead transmission lines: one is supporting the conductors and the other is preventing current from returning to the ground. Insulators should not fail due to flashover breakdown due to changes in environmental and electrical load conditions, which can compromise the use and operational life of the entire line.

The Features of station post insulators high voltage

The insulator has high mechanical strength, small dispersion and safe and reliable operation.

The insulator has good mechanical properties at low temperature.

Excellent stain resistance.

High level of earthquake resistance.

Low radio interference.

Accessen Gasket Plate Heat Exchanger utilize clip on the gasket and advanced designs that optimize performance. We provide efficient heat transfer in compact equipment with a small footprint. Most important of all, they reduce your operating costs and save you money. The heat exchanger has a flexible design and service-friendly ensure that even the largest PHE can be serviced and maintained rapidly and easily by one person using standard tools. The product range is extremely wide up to 60 different models. We also have the special plate design for your specific needs.

AHRI

AHRI performance certificationThe Air Conditioning, Heating, and Refrigeration Institute (AHRI) certification is an independent, third-party verification of thermal performance. Through its certification program and standards, AHRI strives to help customers save energy, improve their productivity and help to ensure a better environment.

(accessen)

Benefits

Improved distribution area allows fluid flow to be even.

The optimal combination of H and L plates can make use of pressure drop at the maximum limit.

Eliminates the scaling area.

Higher turbulent flow due to the corrugated design, hence improving the heat transfer coefficient.

Self-lock devices on the corners of the plate ensure proper fastening.

Standard roof and leakage proof design of gaskets ensures the durability of the gaskets.

Clip-on gaskets without adhesives.

Main Features

Accessen is a genuine original plate heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producing 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

Specifications

Maximum processing capacity: 5,000m³/h

Minimum temperature difference: 0.5-1℃

Maximum design pressure: 25bar

Maximum design temperature: 200℃

Maximum heat load: 60MW

Plate materials: AISI 304, 316, 316L, TI, SMO254

Advantage

Accessen are a genuine original plate type heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producting 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

FAQ

Inquiry request？

Please contact Accessen export office. For the most accurate quotation, please prepare the following data:

Duty, Type of media, Pressure drop, Flow rate, Working pressure, Thermodynamic properties, Temperature, Working temperature.

Which certificates are available for the heat exchangers?

ASME, ISO, AHRI, BV, DNV etc... Case by case certificate was allowed.