Blogs/News/PSAs

Check the lubrication condition every 50 hours after the palm kernel oil pressing machine works. The oil cup on the gearbox shall not be lack of oil. The bearing in the adjusting screw of the through pressing screw shaft of the source shall be extracted from the adjusting screw hole and filled with grease once. Dry grinding is strictly prohibited.

The lubricating parts of the palm kernel oil pressing machine shall be protected from dust and other impurities. The oil quality of the gearbox shall be checked once a year. If it is found to be deteriorated, all the oil shall be replaced.

When the press volume of palm kernel oil expander machine is reduced and the cake or oil is not normal, the screw shaft shall be pulled out to check the wear of the screw, the strip, the head and the outlet. The worn parts shall be replaced in time.

After each work, the residual cake in the machine shall be removed and the dust and oil dirt on the machine surface shall be wiped.

When it is stored for a long time after the end of the production season, it shall be maintained once, and the screw, strip and cake head shall be removed, washed, repainted and oiled, and placed in a dry place.

After oil extraction of palm kernel oil expander machine, remove the cleaning residue from the spiral shaft, and wipe the rotary port with dry cloth and cotton swab to prevent blocking.

Palm kernel oil expander machine common faults

The water content of press material is low

The squeezer's squeezer cage makes a rattle, which makes the whole squeezer vibrate;

The cake can't be lumped and broken, and it is dark brown with burnt spots;

The load current of power motor is higher than 30 A;

The oil outlet is moved to the direction of the cake outlet, and there is blue smoke at the cake outlet, the oil outlet is reduced, and the oil colour is dark brown.

If the above phenomenon lasts too long, it will cause major mechanical damage accidents. At this time, it is necessary to immediately reduce the steam pressure, increase the direct steam injection amount in the upper steam cylinder, close the discharge valve, reduce the feeding to the press cage, increase the cake thickness, and gradually reduce the load of the press, and then adjust it to make it return to normal working condition.

The moisture content of press material is too high

1. When the moisture content of the press material is high, the following phenomena will occur 1. There is little feed or even no feed, or the material rotates with the shaft;
2. The cake is loose and soft, with a lot of water vapour. When the cake comes out, it has oil. When the cake comes out, it rotates with the shaft;
3. The motor load drops and the working current is below 20 A;
4. the amount of oil is reduced, the oil is white and froth, and the oil outlet is moved toward the feed side. In case of the above situation, the indirect steam pressure shall be increased immediately and gradually to reduce the injection amount of direct steam, and some slag cake shall be added at the feeding port until the oil press returns to a normal state.

Beijing Palm International Group Ltd., offers artificial greenery bushes. Our products are grouped by different kinds of artificial plants, such as fern, banana tree, traveler palm, area palm and so on to satisfy customers' requirements . All large artificial bushes are made of plastic, with UV-protection; some can be fire-proof.

Beijing Palm International Group Ltd., has over 20 years of experience in supplying high quality artificial bamboo and artificial outdoor plants and shrubs. The design and build of your beautiful artificial plants is all done in house by highly skilled craftsmen. We deliver all our products safely and securely .

Introduction of Artificial Date Palm Tree

We Beijing Palm International Group Ltd. supply artificial date palm tree, both the trunk and leaves are able to stand the strong sunshine by the means of the latest modern technology. Each palm tree can be straight or bent, and the height can be customized. For aesthetic value, many people not only spare much effort to make his or her space brighter, but also bring set many plants there for some freshness. But the real plants can be an burden as them need many special caring and watering. To help with these problems, we present you with our artificial date palm trees. They can help with guidance, also bring comfort and individuality to the environment. Our artificial palm trees will help you set the perfect atmosphere in the outdoor landscape and will prepare your commercial property in the warmest way possibly. Featuring highly detailed, with charming tree trunks supported by elegance and lush leaf arches outwards, our outdoor faux date palm tree will be a special scenery  for your place in the future.

Our outdoor artificial palm plants are very suitable for various kinds of commercial spaces, including parks, exhibition buildings, airports, schools and other commercial space. These artificial palm trees are made of high quality materials that look and feel very real. They are highly durable, do not require any form of continuous maintenance. Our artificial trees take advantage of our innovative technology to ensure anti-UV and strong color fastness, making them fade resistant and completely suitable for outdoor use. Therefore, it can be used even in outdoor places without worrying about color faded caused by sun, wind, water or snow. If you want to create an outdoor landscape, from color to texture, from environment to utility, all you need is our collection of outdoor date palm trees.

Details Of Artificial Date Palm

Beijing Palm with more than twenty years of experience in supplying good quality beautiful artificial plants. We finish all tree in our factory by highly skilled engineers. We deliver all our products safely and securely.

Oil palm is a widely planted oil crop in the tropics. Not only the palm fruit but also the palm kernel can extract oil. In general, the palm oil expeller machine is mainly used to extract palm oil, which is called red palm oil. Palm oil machine is mainly used to extract palm kernel oil, also known as white palm oil.

Palm kernel oil expeller machine is the main equipment for extracting palm kernel oil. The palm kernel oil extraction machine can squeeze most of the oil from the palm oil crop under high pressure through mechanical pressure.

If your raw material is a clean palm kernel, the steps you take to extract palm kernel oil are as follows:

First, separate the palm-shell and palm-kernel by kernel separating equipment.

Secondly, break the palm kernel into small pieces, and the surface area of oil is increased after crushing, which is conducive to the transfer of temperature and moisture during steaming and stir-frying.

Thirdly, the purpose of steaming and stir-frying is to completely destroy the palm kernel cells through the action of temperature and moisture. To denature the protein, accumulate the fat, reduce the oil viscosity and surface tension, adjust the elasticity and plasticity of the billet, and passivate the enzymes.

Fourth, put the treated oil into the palm kernel oil pressing machine, palm kernel oil extraction machine USES the principle of mechanical external force to extract palm kernel oil:

Fifth, the crude palm kernel oil obtained after pressing is generally not clean, there are a lot of impurities. We finally process simply to extract relatively clean palm kernel oil through the leaching or filter equipment;

If your raw material is a pressed seed cake from the palm oil crushing plant, you need to do this: after the crushed cake is broken, send it to the fiber separator and fiber polishing roller for fiber separation. After these simple treatments, you can get a cleaner palm kernel, and the rest of the process is the same.

Characteristics of palm kernel oil press:

Easy operation and maintenance;

High capacity;

High oil yield;

WINE AND LESS

Membrane crossflow filtration is becoming the unique alternative to kieselguhr filters in wine industry with the developments in environmental and health regulations.

Membrane crossflow filtration is widely used in wine membrane filter system for wine filtration, especially as the red wine filter. It can also be used for cross flow filtration beer. Now, the membrane crossflow filtration technology potential for energy-efficiency has made it a viable technique for the clarification of wine and other beverages.

Crossflow filtration uses a selectively porous ceramic membrane that filters a liquid in order to purify or clarify it. The quality of the filtration is constant over time because the fouling is reduced because the filtering is made without any change of state of the filtered element, and never gets distorted. Membrane crossflow filtration is one of the environmentally-friendly wine filtration systems. During the filtration, no filter aid is used. In one step, crossflow filtration clarifies the wine, giving it a clear appearance and making the wine microbiologically stable. So it has very strong advantages in simplifying the steps before bottling and reducing or eliminating the need for some consumables.

Advantages:

Stable filtrate quality

Maximum guarantee the sensory properties of the wine

Optimized process

No filter aids required

High yield

Reduced filtration costs & product losses

Smart, compact, small footprint

BEER BOTTOM RECOVERY

Bottom yeast sediment refers to the yeast sediment still remains in the fermentor  at the time of wine production, containing beer (sediment beer), calculated as 1000 liters of beer with 3 liters of "recovery yeast + sediment beer", then the yeast sediment is beer amount of 1.5% to 2%, the amount of beer recovered from the yeast is about 1% of total beer. Beer membrane filtration without filter aid has been increasingly used to recover beer from yeast, both good quality beer can be recovered, but also improve economic efficiency.

CIDER

Cider is an alcoholic beverage made from the fermented juice of apples.

Cider is popular especially in the West Country, and widely available. The UK has the world's highest per capita consumption, as well as its largest cider-producing companies.

Cider alcohol content varies from 1.2% ABV to 8.5% or more in traditional English ciders, and 3.5% to 12% in continental ciders.

Perry is a similar product made from fermented pear juice.

JIANGSU JIUWU HI-TECH CO. LTD.,founded in 1997, focus on producing ceramic membrane for many years. And JIUWU HI-TECH has become a leading company in the membrane separation industry. We sincerely invite and welcome people from all around the world to invest and create more values together.

Palm kernel oil expeller is a widely planted oil crop in the tropics. Not only the palm fruit but also the palm kernel can extract oil. In general, the palm oil expeller machine is mainly used to extract palm oil, which is called red palm oil. Palm oil machine is mainly used to extract palm kernel oil, also known as white palm oil.

Palm kernel oil expeller machine is the main equipment for extracting palm kernel oil. The palm kernel oil extraction machine can squeeze most of the oil from the palm oil crop under high pressure through mechanical pressure.

If your raw material is a clean palm kernel, the steps you take to extract palm kernel oil are as follows:

First, separate the palm-shell and palm-kernel by kernel separating equipment.

Secondly, break the palm kernel into small pieces, and the surface area of oil is increased after crushing, which is conducive to the transfer of temperature and moisture during steaming and stir-frying.

Thirdly, the purpose of steaming and stir-frying is to completely destroy the palm kernel cells through the action of temperature and moisture. To denature the protein, accumulate the fat, reduce the oil viscosity and surface tension, adjust the elasticity and plasticity of the billet, and passivate the enzymes.

Fourth, put the treated oil into the palm kernel oil pressing machine, palm kernel oil extraction machine USES the principle of mechanical external force to extract palm kernel oil:

Fifth, the crude palm kernel oil obtained after pressing is generally not clean, there are a lot of impurities. We finally process simply to extract relatively clean palm kernel oil through the leaching or filter equipment;

If your raw material is a pressed seed cake from the palm oil crushing plant, you need to do this: after the crushed cake is broken, send it to the fiber separator and fiber polishing roller for fiber separation. After these simple treatments, you can get a cleaner palm kernel, and the rest of the process is the same.

Characteristics of palm kernel oil press:

Easy operation and maintenance;

High capacity;

High oil yield;

Beijing Palm International Group Ltd. has over 20 years of experience and are now a professional manufacturer in the artificial garden plants and artificial green plants. We provide high quality artificial plants for sale , and flexibility to customize artificial tree solutions to customers all at an affordable price. We are able to find the perfect artificial tree solutions according to your space or budget.

Introduction of Artificial Coconut Palm Tree

Artificial coconut palm trees are a great way to add height, shade and tropical fun to the commercial space. Available up to 40 feet in height, these artificial beauties are wonderful landscapes that do not need specific caring or watering like real plants. 

Furthermore, each coconut palm is handmade to the specifications of each customer.See our coconut palm trees with natural curvilinear trunks as an additional option. We offer all kinds of outdoor pr indoor palm trees including cycas, fan-shaped and date palms which are ready for some fun and sunshine for the reason that both the trunk and leaves are able to stand the strong sunshine by the means of the latest modern biotechnology.

Details of Outdoor Artificial Coconut Tree

TRUNK
Outdoor artificial coconut palm tree is able to prevent strong sunshine. The tree height varies from 4 meter to 15 meter and the trunk diameter various from 22 to 40 meters, with a strong tube inside whilefiberglass material outside. For your concerns, our products can be straight, naturally curved and tapered.

LEAVES
Artificial coconut palm tree leaves are made by UV-protected PE material and we can also offer fire-proof kinds. The frond length is up to 3.5 meters and  canopy diameter up to 6.5 meters. Just a reminder, right now it is only our factory can do this kind of products, with guarantee of 3 years and lifetime 5 to 8 years.

RECEIVER HEAD
The artificial coconut palm tree is constructed with steel tube inside which is easy to assemble and it is detachable to facilitate change of leaves.

BASE FIXING
The outdoor artificial coconut palm trees are supplied with full base plates and completed fixing details and can be fixed to most of the architectural substrates.

With over 20 years of experience in supplying high quality artificial tree and plant,  we are confident that we can be your good partner. Please feel free to contract with us anytime.

We have various artificial coconut trees for sale. RFQ today!

Beijing Palm International Group Ltd. has over 20 years of experience and are now a professional  artificial plants factory in the artificial trees and planting industry. We provide high quality products, and flexibility to customize artificial tree solutions to customers all at an affordable price. We are able to find the perfect artificial tree solutions according to your space or budget.

Introduction of Artificial Date Palm Tree

We Beijing Palm International Group Ltd. supply artificial date palms, both the trunk and leaves are able to stand the strong sunshine by the means of the latest modern technology. Each palm tree can be straight or bent, and the height can be customized. For aesthetic value, many people not only spare much effort to make his or her space brighter, but also bring set many plants there for some freshness. But the real plants can be an burden as them need many special caring and watering. To help with these problems, we present you with our artificial date palm trees. They can help with guidance, also bring comfort and individuality to the environment. Our artificial palm trees will help you set the perfect atmosphere in the outdoor landscape and will prepare your commercial property in the warmest way possibly. Featuring highly detailed, with charming tree trunks supported by elegance and lush leaf arches outwards, our outdoor faux date palm tree will be a special scenery  for your place in the future. 

Our outdoor date palm trees are very suitable for various kinds of commercial spaces, including parks, exhibition buildings, airports, schools and other commercial space. These artificial palm trees are made of high quality materials that look and feel very real. They are highly durable, do not require any form of continuous maintenance. Our artificial trees take advantage of our innovative technology to ensure anti-UV and strong color fastness, making them fade resistant and completely suitable for outdoor use. Therefore, it can be used even in outdoor places without worrying about color faded caused by sun, wind, water or snow. If you want to create an outdoor landscape, from color to texture, from environment to utility, all you need is our collection of outdoor date palm trees.

Details Of Artificial Date Palm

Beijing Palm with more than twenty years of experience in supplying good quality   artificial palm plants  and we have various artificial palms for sale. We finish all tree in our factory by highly skilled engineers. We deliver all our products safely and securely.

Beijing Palm International Group Ltd. has over 20 years of experience and are now a professional manufacturer in the artificial garden plants and artificial green plants. We provide high quality artificial plants for sale , and flexibility to customize artificial tree solutions to customers all at an affordable price. We are able to find the perfect artificial tree solutions according to your space or budget.

Introduction Of Outdoor Artificial Washington Palm Tree

Details Of Outdoor Artificial Washington Palm

TRUNK
Outdoor artificial Washington palm trunk is UV-protected. The tree height varies from 5 meter to 15 meter and the inner section is composited with steel core. Our products can be straight, naturally curved and tapered. Bottom diameter is 40 to 60 cm and top diameter 35 to 40 cm.

FRONDS
Artificial Washington trees's fronds are made by PE material, UV-protected. Fire-proof function can be selected. Frond length is up to 2 meters & canopy diameter up to 3.8 meters. Right now only our factory can do this kind.

RECEIVER HEAD
The artificial Washington palm is constructed with steel tube which is easy to assemble and detachable to facilitate change of leaves.

BASE FIXING
The outdoor artificial Washington palm trees are supplied with full base plates and complete fixing details and can be fixed to most of the architectural substrates.

Beijing Palm Company had over 20 years of experience in supplying high quality preserved Washington palm. The design and build of your artificial tree is all done in our factory by highly skilled craftsmen. We deliver all our products safely and securely. As a professional artificial palm trees supplier, Beijing Palm Company produce various fake palm trees for sale. Don’t hesitate to contact.

Beijing Palm International Group Ltd. has over 20 years of experience and are now a professional manufacturer in the artificial garden plants and artificial green plants . We provide high quality large artificial plants for sale, and flexibility to customize artificial tree solutions to customers all at an affordable price. We are able to find the perfect artificial tree solutions according to your space or budget.

Introduction Of Preserved Washington Palm

Beijing Palm International Group Ltd. offers preserved palm trees, preserved by special technique by the means of the latest modern biotechnology. Each palm tree is custom made. 

Details of the preserved Washington palm

As for the trunks, preserved washington palm trunk's height varies from 2.5 meter to 30 meter with inner section composed of with steel core. Our trunks can be straight, naturally curved and tapered with bottom diameter 30-70 cm and top diameter 25-35 cm.

As for fronds, washington palm tree's fronds are preserved by natural absorption technique. The Frond length is up to 1.6 meters and canopy diameter up to 2.8 meters. 
Furthermore, the preserved washington palm is constructed with steel tube which is easy to assemble and detachable to facilitate change of leaves.

Last but not the least, the preserved washington palm are supplied with full base plates and complete fixing details and can be fixed to most of the architectural substrates or to a dedicated plant pot.

Beijing Palm Company had over 20 years of experience in supplying high quality preserved Washington palm. The design and build of your artificial tree is all done in our factory by highly skilled craftsmen. We deliver all our products safely and securely.

Palm oil is not only the highest yielding cheap vegetable oil on the earth but also a safe raw material for edible oils and daily chemicals, and a raw material for biofuel.

As a raw material for edible vegetable oils, chemical raw materials and biofuel, palm oil has attracted worldwide attention in the process of ecological protection and industrial pollution. As a result, palm oil wastewater treatment also receives much attention. 

Palm oil mill effluent (POME)is a yellow liquid with a unique unpleasant smell and comes from oil extraction, cleaning and washing process in the POME factory, which is featured with very high COD and BOD. 

Due to its acidic nature (pH 3.4–5.2), high salt and suspended solids, oil and grease, the untreated discharge of POME can result in considerable environmental consequences.

Each ton of palm oil produced emits about 20 tons of high-concentration organic wastewater. When the high-concentration organic wastewater per ton is treated according to the current sewage pond treatment method, it is equivalent to emitting more than 210 million tons of carbon dioxide gas into the atmosphere every year. It's important to solve the problems inpalm oil mill effluent treatment.

To achieve environmental requirements and economic challenges, the POME factories are trying to get efficient and return on the investment process.

JIUWU HI-TECH has made a lot of studies and many rich experiences for POME treatment since 2012.
JIUWU HI-TECH offers the solution for POME treatment with an integrated ceramic membrane technology which is a green, friendly environment, economic efficiency and has the following technical benefits:

• No discharge of wastewater
• Low capital investment ;
• Low operation cost;
• Oil is concentrated and water is recycled

After integrated process filtration, concentrate including surplus sludge from anaerobic and centrifuge is used as fertilizer for cattle farm and purified water can be used for recycling or the bolier feed water due to salts and organic compounds are removed.