Blogs/News/PSAs

Our own number: 557

Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.

Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.

Comprehensive maintenance, direct to the construction site.

Overview of equipment:

Five-section RZ arm frame, the fabric is flexible.

X-shape outrigger, single side support, suitable for narrow site construction.

The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.

Computer energy saving control, automatic power matching, the average energy saving is 20%.

The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.

The new control system is free to upgrade automatically.

The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.

Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.

Safety precautions of Used Sany 46 Meters Concrete Pump

1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.
2. The sany concrete pump for sale must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.
3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.
4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.
5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.
6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.
7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.
8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.

We are professional side load forklift electric supplier and factory in  China. We can produce the product according to your requirements.

TD Series side loading forklift truck, rated load capacity: 2500kg, lift hieght:7200mm, used for long material transportation;

1. The lift cylinder with buffering function, to ensure the goods' safety during the lift and down;
2. All electric connector with water-proof and dust-proof design;
3. Better Stability;
4. Side battery loading design, easy to change and maintanin the battery;
5. Use Vertical drive cell to Increase the working life;
6. Ergonomics design and shock absorption configuration, with more comfortable operation;
7. Buffering design for lift cylinder, to imporve the function of mast in lifting and downing,to ensure the safe for products;
8. Electromagnetism braking with Lose-electric type have reliable braking result, it's can easy to make the parking brake safely;
9. Battery with side-pulling function, easy to change and maintenance.

Side Loading Electric Forklift Parameters

We are custom made lcd display manufacturer, specializing in a wide range of TFT and passive matrix Liquid Crystal Display technologies, and etc. : Wide viewing angles, wide color gamut, high contrast, sunlight readability, extreme temperature functionality and more. Even more, we can fully integrate LCD displays into complete display modules with our custom touch screens, cover lenses, and a variety of additional value-added features – so you don’t have to shop around for multiple suppliers. Let our experienced design team create the perfect touchscreen display solution for your product’s unique requirements.

Eolane SCM also offer types of touch panel, resistive touch panel and capacitive touch panel with built-in touch controller.

A wide range of standard size is from 1.8" to 10.1", the FPC connector used for touch panel is available for all the size.

With our highly skill in display, customized-made lcd display is very welcome to us.

Our custom design lcd solution would be based on mechanism dimensions, display mode, display pattern &resolution, connection interface, display luminance, power consumption, cost budget, etc.

Custom TFT LCD module:

Custom make tft lcd module,

* TFT LCD glass

* FPC dimension,

* backlight,

* luminance,

* connection interface

Custom OLED module:

Choose standard OLED display sizes, and semi-custom make for

*FPC dimension

*interface.

SMD color consistency is good. The dispensing process adopts centrifugal technology to enhance the uniformity of the light spot and good heat dissipation. Plasma cleaning before welding line to improve the bonding force between golden wire welding ball and chip and bracket. Plasma cleaning before solid crystal support, clear the residual of the support, coating oxides and so on, improve the solid crystal adhesion.

Features of multi color smd led:

Separation design, Design Flexible, cost savings on a system level;

Small thickness, high productivity, not easy to oxidize, high efficiency, anti-vibration, light source concentration

Support surface mount technology

The product has passed lm-80 certification

Chip with high power back aluminum plating process, more direct heat dissipation

It can be used in ultraviolet application light source, infrared application light source, plant growth light and other different application fields

The china label die cutting machine is all kinds of trademarks processed into the final product must be the machine. The steps of the die-cutting process are as follows: unwinding - die cutting - scraping - winding or crosscutting. Unwinding the gas up the shaft. Die cutting is the core part of the whole machine, die cutter can be customized according to the requirements of flexible and convenient. Abandoned part of the active shaft and passive shaft, easy to operate and effort. Winding or cross-cutting can be handled according to customer requirements.

Die-cutting process is the most commonly used packaging printing process, is to use a die-cutting machine tool according to product design requirements of the combination of patterns into a die-cutting version, under pressure, the printed matter or other bobbin material rolled into the required shape Or cut the molding process, the indentation process is the use of crimping knife or crimping die, through the role of pressure in the sheet on the out of the wire marks, or the use of roller in the board according to the predetermined location of bending forming.

The loyal die-cutting machine is the flat pressure die-cutting machine. Flat die-type die-cutting machine die-cutting platform and the shape of the cutting mechanism are flat. The stencil is fixed on a flat stage and the sheet is placed on a platen (lower platen). Work, die-cutting plate fixed, the pressure plate through the crankshaft connecting rod reciprocating motion, making the platform and the pressure plate constantly clutch pressure, each pressure will be a time to achieve a die-cutting.

Flat die-cutting die relative to other die-cutting equipment has a simple structure, easy maintenance, easy operation, easy to replace die-cutting indentation plate, suitable for the different weight of the material, die cutting precision and a series of advantages.

LOYAL for different customer groups, designed two die-cutting machines: stickers trademark die-cutting machine and electronic die-cutting machine.

We china paper slitter rewinder machine suppliers always regard the after-sale service as one of the most important parts in a trade, which probably establishes customers relationships. So you are not always worried about any issues you may face after your purchasement.

Ultraton is also capable to research and develop a long vehicle for fuel. We can supply 20m³Tanker Semi Trailer, 40m³Tanker Semi Trailer, 45m³Tanker Semi Trailer. Tank Semi Trailer is one of the most commonly used modes to transport fuel including crude oil, petrol, diesel. It could be your safeguard to deliver fuel on the road! What is the structure and system to realize it? Fuel tanker semi trailer for sale generally consist of a trailer chassis, a tank assembly, a feeding port cover, a filling and unloading system, a safety protection system, and an automatic insulation system (if needed). The tank assembly is mainly welded by an end cover, a wave guard baffle (separator), a feeding port, a discharge port, a top walking fence, a manhole, and an integral support seat.

All of these components are strictly selected. It can also be optional on the material! The tank material can be selected from carbon steel, carbon steel lining rotomolding, stainless steel, aluminum alloy, glass reinforced plastic, and full plastic (polyethylene). A coating of anticorrosive paint and decorative paint are painted on the exterior of the Tank Semi Trailer to prevent rust. The tank shape has an elliptical shape, a square shape, and a circular shape. Different oils and other chemical liquids can be dispensed separately or in separate positions. The warehouse of the Tank Semi Trailer can be divided into several rooms. A wave plate is welded into the middle of each warehouse, in order to reduce the impact of the oil and increase the strength of the tank when the truck is running. The safety protection system includes an auxiliary safety device such as a safety valve seat, a level gauge (seat) and an emergency shut-off valve seat. Filling and unloading systems, including chemical liquid pumps, flow meters, intelligent control systems, etc. Ultraton industrial trailer manufacturers has mature workmanship to ensure reasonable structure, flexible steering, wonderful insulation effect, reliable braking. For every Tank Semi Trailer, due to strict road regulation, the paint color, nameplate, typeface, and logo of the vehicle (tank) must match the installed media.

CAS NO.: 127-18-4

Perchloroethylene (PERC), also known as tetrachloroethylene, is an organic chemical that is widely used in dry cleaning and metal degreasing. It is also used in the manufacture of other chemicals and consumer products. It is a non-flammable liquid at room temperature, but easy to volatile with a sweet stimulating odor. Many people can smell PERC when the air contains one millionth of it. In 1821, Michael Faraday heated hexachloroethane for the first time to decompose it into PERC and chlorine.

 Health hazards: The product of PERC has stimulative and anesthetic effects. Inhalation will cause acute poisoning with symptoms of upper respiratory tract irritation, tearing, and runny nose.

 Symptoms occur after oral taking: dizziness, headache, drowsiness, nausea, vomiting, abdominal pain, blurred vision, numbness in the extremities, and even excitement, convulsions, coma, and death.

 Chronic effects: One feels weakness, dizziness, nausea, flu and so on, and may have liver damage.

 Repeated contact with the skin can cause dermatitis and eczema. For skin contact, remove contaminated clothing and thoroughly wash skin with soap water.

 For eye contact: Lift eyelids, rinse with running water or saline, and seek medical advice.

 For inhalation, one should quickly move from the scene to somewhere else with fresh air. Keep his respiratory tract smooth. If his breathing worsens, give him oxygen. If his breathing stops, give him artificial respiration immediately. Always seek medical advice.

 For ingestion, drink plenty of warm water and induce vomiting. Seek medical advice.

Are you looking for perchloroethylene china? RFQ today!

With the development of automation technology, assembly and automation technology are also used in the production process of the pipeline. Now let's realize the benefits of assembly and automation technology through an automatic assembly line.

Automatic assembly line features:

1. The safety of equipment performance is guaranteed. It can not only operate in high-temperature places, but also in a dusty environment. It has a strong adaptability to the environment.

2. Transportation volume is large, which can bear a larger weight and greatly improve production efficiency.

3. It has various functions and is convenient for storage and transportation. It can be used as an assembly and development line as well as the storage and transportation of goods.

4. The assembly line is easy to assemble and customized with special aluminum profiles.

5. The conveying speed is stable, accurate and efficient, which can ensure the synchronous conveying of products.

6. Beautiful appearance, concise structure, easy installation, practical and noise-free.

7. Automation not only reduces the production cost but also greatly improves the production efficiency and ensures the stability of the production process.

These are the main features of the automatic assembly line. Now let's look at the composition and structure of the assembly line.

Composition structure of an automatic assembly line:

1. Most of them are made of stainless steel or aluminum profiles. Of course, they can also be customized according to customers'needs.

2. The width and height of the assembly line can be customized according to actual needs.

3. Conveying speed can be adjusted according to need.

4. Customers can customize the form of a linear assembly line or plate-chain assembly line or drum assembly line according to their own needs.

5. Non-standard products of the assembly line can be customized.

With the development of technology, the automatic assembly line will gradually develop towards the intelligent direction to adapt to higher and faster development speed.

YIHEDA AUTOMATION - China Automatic Production Line Manufacturer Contact

Mobile & Wechat: +86-18676932381

Email: ae@yiheda.com

ADD: Fengxiang Road, Dogfang lndustrial Park, Beizha, Humen Town, Dongguan, Guangdong Province, China.

There are 12 men that have walked on the moon. 500 human beings have been

to space. But only 3 dived into Challenger Deep, the deepest point under the sea.

Yet the sea covers 70% of the earth. Let’s discover the unknown with underwater search camera P3.

Go Anywhere You Wish. Capture Every Epic Adventure.

Fast & stable shooting could be easily achieved since FIFISH P3 has combined aesthetic, hydrodynamics design and AI altitude algorithm in one.

You can take adventures as you wish even in harsh environment.

Smooth, Efficient LIVE-Streaming

FIFISH APP (IOS & Android ) features 1080P Live-Streaming.

Wireless multi-display is supported, which allows you to watch epic moments in real-time.

Easy, Smooth, and Accurate

Customized controller works well for entry level users and professionals

Ultra-sensitive control stick provides

seamless control in 6 directions of movement.

8 Adjustable brightness levels

Accurate Suspension

Smart Hands Free

High speed and Low speed

Overview of 630W CMH Grow Light Fixture

Runs 2pcs of 315W CMH lamps

High efficiency electronic ballast

Works on 120V/240V

High output and improved spectrum

Warranty: 3 years

ETL certified

The Details of 630W CMH Grow Light Fixture

German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with two pcs of ceramic metal halide 315W lamp

Two pcs of 315 cosmo lamphoders

Matched power cord included

The Advantages of 630W CMH Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

The Specification of 630 Watt CMH Grow Light Fixture

The Application of 630W Ceramic Metal Halide Grow Light Fixture

Commercial Greenhouse for flowers to extend the time of growth by providing supplemental light when there's no enough natrually occuring light. The flowers look glossier and more vivid with the application of 630W CMH grow light fixture.

The Production Process of 630 Watt CMH Grow Light Fixture

The Drawing of 630W CMH Grow Light Fixture

Other Notes of 630W CMH Grow Light Fixture

There are two protective requirements for optical fibers in formation of the fiber optic cables: one is less stress on optical fibers; the other is waterproof of optical fibers.

The outermost layer of the cable is a plastic sheath, and the inside is a metal sheath, and more inside is a water-blocking layer expanded by water. The core of the cable is pasted together with the optical fiber. Fiber optic has four waterproof gates, namely, plastic sheath, metal sheath, water-proof layer and ointment. Then the question arises. Why are optical fibers so afraid of water? Why aren't the aquarium glass and window glass at home afraid of water while they are waterproof? Why are they all glass so different?

It is generally believed that optical fibers are not afraid of water, because glass has excellent water absorption. It is generally believed that optical fibers are not afraid of water, because glass has excellent water absorption. But in fact, water is very harmful to cables. If water enters the fiber optic cable, it will damage the optical fiber if it freezes and expands in the cold water, so the cable needs to be filled with ointment to prevent moisture from entering.

The reason why optical fibers are afraid of water is that optical fibers are made up of glass (Si04) tetrahedrons connected with each other. In a Si-O-Si network, oxygen atoms exist in the form of bridge oxygen. However, in the environment with water, after the glass surface adsorbs water and gas, the hydrolysis reaction slowly occurs, which leads to the breakage of the silicon-oxygen bond in the original network-Si-10-Si-1 and the transformation of bridge oxygen into non-bridge oxygen. As a result, the glass cracks are caused, which are growing continuously. 

Whether for fish tank glass, window glass or optical fiber glass, they are afraid of water. The difference is that fish tank glass, window glass are very thick, with the thickness of 3mm, 5mm, l0mm, even if there are 0.05mm cracks do not affect the strength of the glass, and naked eyes can not see changes. Fiber optic glass is different. The diameter of fiber optic glass is only 0.125 mm, which is as thin as hair. If there is an 0.05 mm crack, the diameter of fiber optic will remain 0.075 mm. Therefore, fiber optic is very easy to break. In addition, the appearance of OH root will increase the absorption loss of fiber to light. This is why aquarium glass and window glass are not afraid of water while optical fiber glass is afraid of water.

Even so, the cable is damaged, and the joint box is not sealed properly, and the exposure of bare fibers will lead to shorter service life and natural fiber breakage due to water.

Shenzhen Yutai Optoelectronic Communications Co., Ltd. provides high quality optical cables, which is the best choice for buying fiber optic cable.

We provide a wide range of used Picanol rapier looms and Picanol air jet looms. The used Picanol looms offered by us are of high quality and economical price. The used Picanol loom for sales from our company enjoy popularity from both domestic and overseas markets.

16 Picanol Omni Plus 190 Cm Year 2008

PEEK connector, we also call it PEEK sealing terminal or HTHP connector, just as its name implies which the connector is made from PEEK material combining with metal contact and using glass sintered technology sealing PEEk material & contact so it has perfect air leakage performance. In wellhead, gate valve requires to PEEK terminal for sealing, or tubing head spool for connect gauge or control line of the outlet of the wellhead, and using on adapter spool for hydraulic control line terminated(C/L), electrical cable fit.PEEK connector, we also call it PEEK sealing terminal or HTHP connector, just as its name implies which the connector is made from PEEK material combining with metal contact and using glass sintered technology sealing PEEk material & contact so it has perfect air leakage performance. In wellhead, the gate valve requires to PEEK terminal for sealing, or tubing head spool for the connect gauge or control line of the outlet of the wellhead, and using on adapter spool for hydraulic control line terminated(C/L), electrical cable fit.

The working environment of the oil gas petrochemical industry always is harshness, dirty, high pressure, extreme temperature, chemical corrosion, low PH erosion, and various different kinds of gas. PEEK, benefits of physical performance with Pressure in 30,000PSI /207Mpa, the extreme temperature in 300℃, it satisfies for the special area and high-performance solutions.

PEEK melts at a relatively high temperature (343°C / 649.4°F) compared to most other thermoplastics. In the range of its melting temperature, it can be processed using injection molding or extrusion methods. It is technically feasible to process granular PEEK into filament form and 3D printing parts from the filament material using fused deposition modeling – FDM (or fused filament fabrication – FFF) technology. PEEK filaments have been demonstrated for producing medical devices up to class IIa. In its solid state PEEK is readily Machinable, for example, by (CNC) milling machines and is commonly used to produce high-quality plastic parts that are thermostable and both electrically and thermally insulating. Filled grades (30% Glass filled) of PEEK can also be CNC machined, but special care must be taken to properly manage stresses in the material. PEEK is considered a high-performance polymer, that is to say, its high price restricts its use to the most demanding applications only.

What is PEEK?

Polyether ether ketone (PEEK) is a colorless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications.

PEEK is a thermoplastic semicrystalline with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK has a glass transition temperature of around 143 °C (289 °F) and melts around 343 °C (662 °F). That’s why PEEK seals and manifolds are commonly used in fluid applications. PEEK also performs well in applications where continuous high temperatures (up to 500 °F/260 °C) are common. It has high resistance to halogen, strong bronsted and Lewis acids, thermal degradation, biodegradation, Air leak: helium leak test ≤ 1× 10 -3 Pa.cm 3 /s

Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, High-performance liquid chromatography columns, compressor plate valves, and electrical cable insulation. It is one of the few plastics compatible with ultra-high vacuum applications.

Beware of the difference of PEEK & PEK;

PEEK is Polyether ether keton & PEK is Polyether keton, both are very strong mechanical and chemical resistance properties but PEEk has one more molecule that means the physical performance more stability.

Introduction to the walnut oil extraction machine

Walnut oil extraction machine presses the walnut with a screw oil press. walnut oil press equipment can automatically control the temperature. With intelligent equipment, it can press in all seasons. The production will not be delayed. According to the different requirements of oil, the temperature of the crude oil is automatically adjusted, which is not affected by seasons and climate.

The application field of walnut oil press machine:

Walnut oil press equipment is suitable for walnut-growing areas. It can be allied in large oil extraction plants, urban and rural oil extraction workshops, processing plants for imported materials and chain organizations of brand edible oil, agricultural markets, communities, supermarkets, town markets, urban living areas, and other densely populated areas. It is also suitable for small and medium investment entrepreneurs. It can also be used to crush peanuts, soybeans, oil palm, rapeseed, cottonseed, etc.

Advantages of walnut oil extraction machine:

1. The quality of oil is high. The oil smells sweet. The machine presses oil in the 150℃temperature oil. Oil color and flavor will not wear out.
2. Take out more oil and squeeze it out once. This machine adopts the four-stage pressing technology, and Residual oil rate is 1%.
3. Good oil cake, without burnt paste taste. High pressure in the chamber of this machine and pressure step by step, the oil can be extracted without frying.
4. Power Saving. The parts of this machine adopt processing and molding technology, with high finish, low mechanical loss and power saving.
5. It is easy to master. The machine adopts axial force decomposition technology, easy to operate without a lifting rod.
6. High durability and few failures. This machine adopts high toughness and wear-resistant steel. It can process 150,000-kilo oil without moving, with low resistance and good lubrication.
7. It benefits users a lot with less consumption, more output, less power consumption, less labor,  and good efficiency of the material.

Walnut oil press for sale! RFQ today!

Height Increase Gel Heel Cushion Insoles For Shoes Heel Pain Relief For Adults ZG-454

1. Washable and reusable foot cushions. Each cushion can be used over and over again.
2. Made with molded medical-grade soft silicone which helps reduce strain, shock, and vibration to joints.
3. Suitable for Most Kinds of Shoes.Great for Running, Walking, Long Standing on your feet all day! You can also wear gel heel pads and forefoot pads separately or together according to your requirements.
4. Anti-skidding, shock-absorbing and depressurizing. Reduce the damage to the foot due to vibration. And also raise your height without notice by others.
5. These silicone heel cups are hypoallergenic, non-toxic, non-flammable and odor free. Helps to improve step balance and foot strength.

Specification

SEPLIFE® Chromatography medias

Chromatography separation medias are based on Agarose & Dextran& polymer matrix.

Chromatography is a technique that is used for separation of mixtures.The components of the mixture to be separated flow through the stationary phase material at different rates, which creates waves or bands. Originally, those bands were detected by visible color differences. Detection methods are now based on the chemical and physical properties of the molecules being separated, including, but not limited to color, UV absorbance, size, charge, and hydrophobicity.

Sunresin offers a wide range of Seplife ® chromatography media that provides unique selectivity, high efficiency, and scalable operations from capture to polish applications. Sunresin has exploited three matrixes, Agarose and Dextran-based chromatography medias could replace the GE life science( Sepharose and Sephadex series )completely but in a saving costs, while polymer-based chromatography medias is superior to Toyopearl 650 and Relisorb 400  have been achieved through a monosphere technology(uniform particle size).

Besides, Sunresin provide some Prepacked Chromatography Columns, which is produced by the standard loading process of the self-developed and manufactured chromatographic medium, hollow column tube and accessories. The production and inspection process is strictly carried out in accordance with GMP standards to ensure that each pre-packed column produced is stable and the separation effect is good to meet the customer's purification requirements. It can be directly connected to the syringe or chromatographic system to use, save time and improve efficiency.

Chromatographic Media products

Ion Learning Exchange Chromatography Media

Size Exclusion Chromatography Media

Affinity Chromatography Media

Hydrophobic Interaction Chromatography Media

Polymer-based Chromatography Media

Prepacked Chromatographic Columns

Blue Elephant CNC router with many standard CNC machine configurations, committed to providing the right CNC machine for your cutting requirements. Focusing on innovative, customization and exceptional service, Blue Elephant has all kinds of CNC machines to suit any project like ATC cnc router machine 1325, 3 axis CNC router ,4 axis CNC router, 5 axis CNC Router, multi head CNC router, advertising CNC router, EPS Styrofoam CNC router, stone CNC router and other CNC routers. we serve all types of industries including but not limited to: aluminum composite and metal composite cladding, sign making, graphics & print finishing, cabinetry, woodworking, plastic fabrication, metal fabrication, foam packaging, point of purchase, solid surface and many more.

It is worth mentioning that the use of Blue Elephant Cnc engraving machine , compared with the manual process, increasing the production capacity by 70%, reducing human error and material waste up to 30%, saving more time and money.

If you are looking for router machine, please feel free to inquiry.

Specifications of jiu-jitsu medals:

Material: Zinc Alloy

Plating: Antique Gold , Antique Silver, Antique Copper

Process: Die Casting + Embossed Pattern

Coloring: No Coloring Filled

Size: 45*45mm

Donghong is a professional maker of all kinds of sports medals since 1984. Our Strengths:

Excellent quality, competitive price, timely shipment, professional customer service, professional one stop solution service. We have jiu jitsu medals for sale, welcome to contact us for cheap custom sports medals!

Overview

We can provide professional IoT solutions for customized remote management systems for PV Power Plant/Solar systems. Up to now, many inverter manufacturers and PV enterprises have established cooperation relationship with us, and more than 100000 units of monitoring equipment with solar pv monitoring software were delivered. There are almost 50000 power plants online with the premium customized monitoring services with high quality and low costs provided by us.

All the plant monitoring software are customized as per customer's requirement.

Key Features

Online monitoring platform enabling you to monitor your pv monitoring system anytime from anywhere

Monitor your PV production and view your current yield online

Visualized real-time data and historical data for analysis and easy understanding

A variety of formats for better presentation

Automatic alarms sent by emails as customized by users

Multi-level management for satisfying specific demands of end users, installers/integrators and device manufacturers

Daily, Weekly and Monthly reports sent via email regularly as specified

Demonstration power stations for reference, system information available to share through the portal

High Performance Cloud platform which enables centralized monitoring for thousands of plants simultaneously

Android/IOS APP available on Google Play and Apple Store. Easy access to portal by mobile devices such as tablet PC and smart phone

Open interface for secondary development and perfect integration into corporate or personal websites

The function and user page of system and app are all customized as per customer's actual requirement.