Blogs/News/PSAs

Mini projector is used more and more widely, not only in some business occasions, but also in many people's home film systems. But most people don't care much about how to use the projector correctly.

In fact, there will be many small problems in the use of the mini led projektor. In addition to the basic installation and maintenance, there will be some puzzling occasion in the use of the projector, which will make the user misunderstand the projector. Today, I'll explain the common problems that the projector occasionally has, so that users won't be too flustered in the use process.

The first is about sound.

Many users will be confused about the sound when using the projector. The speaker of the projector is very small. The main function of the projector itself is to show the perfect picture, and the loudspeaker takes up too much internal space, so the loudspeaker design of the projector will be relatively small, so it is better to cooperate with the external sound equipment when using the projector. At present, most of the projectors on the market are equipped with sound output terminals, which is also fully prepared for the external sound equipment.

Secondly, the brightness of the projector.

Many users responded that the projection screen was not as bright as before after the projector was used for a period of time. They asked if there was a quality problem with the projector. Actually not. At present, most projector products use the built-in bulb penetration projection mode, and the projection brightness is mainly determined by the bulb, while the display brightness of the projector's bulb is inversely proportional to its use time. Generally speaking, after 120 hours of use, the brightness of the bulb will drop by 20% - 30%. Therefore, users must pay attention to protecting the projector's bulb in normal use. Do not use it for a long time. Try to turn off the projector when not in use.

Finally, the problem of the picture.

Sometimes the projector has the state that image is unstable state, or the picture blurs and shakes. This is also not a problem with the projector function. Some tips are needed to solve it. First look at the image instability.

The output image of the projector is unstable and has stripe fluctuation, which is mostly due to the inconsistency between the power signal of the signal source and the power signal of the projector. The user needs to plug the power of the projector and the signal source into the same terminal block, which can basically solve this problem.

The condition of blurred and dithering picture. Generally speaking, if the projector is too far away from the signal source, it will weaken signal, and the performance projected on the screen can be blurred or dithered. So when using the projector, it is noted that the distance between the signal source and the projector can not be too large. If the distance between the two is large, it is recommended to use a signal amplifier to help the projector receive the signal from the signal source.

For ICODIS,Feel free to write us for any and all enquiries, we're always happy to help and will answer as quickly as possible!

LockedAir focuses on providing the total best value solutions in the inflatable protective packaging field. We own a number of air packaging technologies, also set new standards in kinds of applications.LockedAir aims to make a substantial contribution to improving customer packaging safety, cost-effective, and sustainability to ensure significant customer benefit.

Advantages of inflatable air cushion packaging   

Effective in-box protection while no increase of weight of package.

One roll of LockedAir air pillow can replace 10 rolls of traditional filling material while takes much less storage

Clean and clear buffer, brings good opening experience and good brand image.

Air Cushion Machine

With more than 40 patents worldwide, LockedAir cushion machine differentiates from competitors with neat sealing, more air in bag and leakage free sealing. LockedAir cushion machine is faster, quieter, more compact and more reliable.

Extensive Options of Air Cushion Accessories

In addition to the machines and film, LockedAir also provides extensive options of accessories for air cushion system integration, to help you to pack your goods well protected with higher work productivity and ergonomics. No matter whether you want to equip only one packaging station or more than 50 different packaging areas, LockedAir air cushion systems can be integrated into your existing packaging stations with minimum impact to your current layout and can be removed from them at any.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Automatic Packing System, just contact us!

Made of high quality see-through mesh cloth with PE Material and UV resistant , customzied by customers with different size and mesh.

Fruit & Vegetable Mesh Bags Also named Garden netting bag, for Safe and effective barrier excludes many types of pests, including insects, birds and animals ,Mesh size 0.03x0.03in, Soft, s...

Date Palm Tree Mesh Bags

Safely protect your valuable fruit. These bags will effectively shield your ripening fruit from preying birds and insects. These bags are also great for placing...

Fruit Tree Covers

Citrus tree covers help you keep psyllids off the tree and protect fruits trees against insects, windy and your investment.Eco-Friendly, it is the challenges th...

Feature

Pest control: The insect net can basically block all kinds of insects, mosquitoes, pieris rapae, plutella xylostella, cabbage moth, prodenia litura, achillea, ape leaf insects, aphid. Significantly reduce the use of chemical pesticides. Can be used to grow pollution-free crops.

Disease prevention: Virus disease is a catastrophic disease for many vegetables, it's mainly spreaded by insects, especially aphids. Insect net cut off the main transmission way, therefore, it helps greatly reduce the infection of vegetable viruses, control effect about 80%.

Regulate the temperature, soil temperature and humidity: Tests show insect nets help plants enjoy up to 3-5? lower temperature. Also, it can effectively prevent frost. Insect net helps reduce the indoor precipitation and the indoor evaporation.

Block sunlight: plant support netting can shade to a certain degree and reduce the possible inhibition caused by the strong light.

Advantages

Easy to install-Cover it directly; Build a hoop or a grow tunnel, then place the netting on the frame

High quality -Eco-friendly, non-toxic, tasteless, corrosion-resistant, anti-aging, anti-ultraviolet and anti-pulling with ventilation and cooling effect.

Wide application -Widely used for garden and agricultural purpose, minimizing wind / hail / frost damages, keeping out birds and insects, and enhancing plants.Plant protector bags Mainly used for cabbage, radish, eggplant, melons, beans, can improve seedling rate and seedling quality.

The computer controlled seven axis synchronous full automatic 2D sheet metal bending machine can convert the product immediately under the same line diameter and its own program; without the need of the special mold, it greatly reduces the time and cost of the newly developed product; the stereoscopic molding can produce a three-dimensional shape line molding product; with an auxiliary lifting platform, it can further guarantee the production. The stability and consistency of the product; the cutting knife can move down to allow more space for product molding.

Computer  wire molding machine, instead of traditional manual mold production line molding products, the machine has stable molding, rapid production, simple debugging, everyone can operate. Full automatic production and so on. It is widely used in automobile parts, supermarket shelves, kitchen utensils, iron wire crafts, and other industries.

Automatic 2D Wire Bending Machine Works

1, the equipment selected sub-drive control high-precision servo motor wire, mechanical transmission selection of precision gear connection, always keep the same line feed accuracy and wire feed speed;

2, shear cylinder hydraulic station equipped with a forced air-cooled radiator, double the extension of the hydraulic system components life;

3, the control system using PLC and text display connection, both convenient operation, but also to ensure the stability of the control system, and the design of the production of preset function control machine running.

Automatic  2D CNC Wire Bending Machine Structure Principle

1, by the precision servo motor drive wheel rotation, with PLC and text display instead of stepper motor controller, according to the need to arbitrarily modify the servo motor slow down the curve and the maximum speed of the servo motor to put an end to the impact of mechanical transmission, absolute To ensure that the actual transmission line length and the theoretical calculation of the length of the same;

2, in the design budget, the length of each MM has been divided into 10 pulses, to further ensure the length of the precision settings;

3, adjustable hydraulic cylinder cut, you can ensure the integrity of the circle incision, cutting time and retraction time can be directly modified in the text display;

4, the design of manual slow feeding, slow return function, easy to operate, reduce material loss.

CNC-480 2D Wire Bending Machine

2D Wire Bending Machine Technical Parameters:

Features of Sheet Metal Press Brake / Bending Machine

CNC Hydraulic Press Brake: Machine's CNC system is optional according to client requirement about an axis for press brake's working and Product accuracy.

2D  wire bending machine: CNC 2D wire bending machine is to produce kinds of wire forms expertly with high precision and fast speed. Adopts Japanese brand servo motor and screen display with the controller.

Roof tile Roll forming machine: It is widely used in industrial buildings, such as factory buildings, warehouses and so on. The high accurate machine series adapted with Plc control.

• rollers plate bending machine: It is controlled by PLC, and the positioning of the rolls is digital readout. The upper roller is in the shape of a drum, accompany of the support rolls of two lower rollers for up and down adjustment, it can get the high precision for deviation from straightness of the finished products. And we provide 3d wire bending machine for sale,please contact us.

What is PCB with Metal Dome

Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the PCB membrane switch.

They are momentary switch contacts that become normally-open tactile metal dome switches when used in conjunction with a printed circuit board (PCB).

PCB is also known as printed circuit boards or pcb board because it is made by electronic printing.  A printed circuit board is a substrate for assembling electronic components and is a printed board on which a point-to-point connection and a printed component are formed on a general-purpose substrate in a predetermined metal core printed circuit board design.

Metal domes can be divided into several groups: round metal dome, triangle metal dome,  rectangular metal dome, four-leg metal dome(cross shape), square shape metal dome and other special shapes. PCB membrane switches are widely applicable. It can be applied in areas including mobile phones, diagnostic equipment, industrial controls, test equipment, and measurement equipment, etc.

Advantages of Our PCB with Metal Dome

Making smaller and thinner packages possible

Dome switch PCB with high product reliability

Low-profile and lightweight design

Membrane PCB with consistent tactile response

Actuation forces are available to meet any needs of applications

Metal dome switch which is able to be used even in the rough environment

Applications Of metal core pcb design with Metal Dome

CD player

Focusing on three-dimensional assembly characteristics of flexible circuit boards and thin thickness.

The mobile phone

Easy connection of the battery, microphone, and buttons and into one. Focusing on the flexible circuit board lightweight and thin thickness. Being able to effectively save the volume of products.

Computer and LCD screen

Using the one-line configuration of thin thickness and flexible circuit boards.

Disk drives

No matter it is or diskette or the hard disk, it is dependent on FPC high softness and thickness of the 0.1 mm slim.

The latest applications

Hard disk drives (HDDs, hard disk drive) of the suspended circuit and the components of xe packaging board, etc.

What we can do in PCB custom membrane keypad

We are one of the trustworthy best cheap pcb manufacturer. However, PCB assembly is also a very important component for metal dome membrane switch. To meet customers' requests and demands, we have a professional team to help the customers change the PCB circuit into a Polyester printing circuit. There are some metal core pcb prototype designs with space limit which need to be changed from the Polyester circuit or flexible circuit into Double-side or Multi-layer's PCB. That's also one of the services we can provide. In addition, Komkey can provide some PCBA services, such as solder the components and assembling metal dome and different layers' (Overlay, Spacer) in PCB. To learn more about

pcb manufacturing price,and we also have bulk pcb and tock pcb ,we provide wholesale pcb ,please contact us!

With the increasing popularity of mobile phones, taking pictures instead of cameras, music playback functions instead of MP3s, and various scanning apps are emerging. The parameters and technology of mobile phone camera and camera scanner are getting higher and higher. Is it still necessary for a clunky and complicated scanner?

Whenever a new technical solution comes into being, it always conflicts with the old one.

Will the popularity of WeChat replace SMS? It won't. Although most people receive SMS verification codes, their formal security and uniqueness prevent them from being completely replaced.

Will the mobile app replace the easy book scanner? It won't.

1) Scan quality. The scanning app solution is based on CMOS technology, which is the camera. The CMOS effect itself is not as good as the CCD, and the scanning effect of the App depends in part on the camera pixels of the mobile phone itself.

2) Professionalism. Many applications are now integrated on mobile phones, and a single mobile phone can meet many needs. However, we still consume cameras, MP3s, game consoles and other products to meet our more segmented needs. In more rigorous occasions, mobile phones cannot replace cameras, Meitu Xiuxiu cannot temporarily replace PS, and apps cannot replace scanners.

3) Application scenarios. In general, apps are mostly used by individuals. When we scan documents daily, such as small diaries, it is not necessary to purchase a scanner, and the App is sufficient. But the biggest market for scanners is at the corporate level. Can you imagine what it looks like to scan millions of documents with App in archives, libraries, banks, public security, procuratorates, courts, etc.? No matter how high my salary is, I've been holding my phone mechanically to scan, change files, and generate finished products ... I won't do it either.

The advantage of App is that it is portable and fast. It's great for personal use. However, it cannot always replace the scanner itself.

For ICODIS,Feel free to write us for any and all enquiries, we're always happy to help and will answer as quickly as possible!

Reliable. Efficient. Innovative

Locked Air® is a globally trusted air void fill solution provider with satisfied customers worldwide.

Using latest technology in protective air cushion packaging, Locked Air® will perfectly protect your products in transit and make your packing process efficient and easier.

Our focus is bringing you reliable, newest technology that requires minimal technical intervention in the long-run

Technology

Locked Air® achieves a 99.99% pass rate compared to 70% to 95% of the industry

From following technologies:

1.Dynamic sealing technology, including linear pressure, temperature auto-adjustment and tension control. No wrinkles - patent 201420439958.6

2.Air control design. Positive inside air pressure-patent 201420398325.5.  

3.Patterned air channels, strong sealing-patent 201420657795.9

Strict Quality Control

We have a rigorous quality control process which will help to improve the design of our products continually. To give you peace of mind, our systems have been designed to withstand extreme shipping environments and they can be operated under extremely hot and cold circumstances. Every component is tested to destruction so you can rely on flawless performance.

We test our   cushion machine   in full for 24 hours before delivery to reduce down time interruption and to ensure you can produce void fill without hassle as soon as they're delivered.

Save Valuable Space

The Locked air system has a compact footprint that takes up less dedicated inventory space, only produce air cushions on demand,  

Safe & Low cost Shipping

Light weight air pillows save on shipping costs. The soft and flexible patterns of cushion films provide best protect from shock during the transportation.

Fast Packing

Easy tear air cushions support variable packaging demand. Speed up your warehouse throughput.

Wonderful User Unboxing Experience

Customized LOGO print, clean and dust- free packaging promotes the image of the enterprise, improves customer satisfaction and possibility of returning order with superior product clean protection.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Air Cushion Packing System, and want to know air cushion machine price,just contact us,we provide air cushion machine for sale!

2020 spiral pipe making machine is driven by a sprocket, and the uncoiler and the main machine are integrated. The discharge rack has an automatic turning function, and the infrared sensor switch controls the cutting length.

2020mm Spiral Duct Forming Machine Features

Slitter /plasma cutting of the tubes to the preset length and required number of pieces.

2. The cut to length is made by the patented slitter (no noise, no hot sparks created by the saw blade, no leaning of the cut edge). Modern industrial proof computer control.
3. The electric drive ensures that even by using 2.0 mm strip coil the 2020 continually produces perfect, tight spiral tubes matching or surpassing the standards of DIN, BS, Euronorm and Smacna
4. The perfect adapted options for making reinforcement beads, for the production of tendon sheet tubes or the automatic production of notches for the METU flanges, during the production process are further advantages of the tube former 2020.
5. 2020 is the only machine for the fastidious customer.

2020mm Spiral Duct Forming Machine Main Technical Parameters

MYT company has over 15 years of manufacturing and exporting experience in HVAC auto duct line,any needs in this aspect,we can provide spiral duct machine for sale,please contact us!

What is Cable Harness

A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring looms and harnesses, is an assembly of electrical cables or wires which transmit signals or electrical power,it is  also motorcycle wiring loom tape. The cables are bonded together with a durable material such as vinyl, rubber, electrical tape, conduit, a weave of extruded string, or a combination thereof. Commonly used in automobiles, car, and construction machinery, bulk wire loom has several advantages over loose wires and cables.

Application and environment are the two major factors that determine the types of the wire harness. Based on these two factors, there are 3 types of cable loom assembly.

Open Bundle:

The cable and harness assemblies are attached to the connectors and lugs and are coupled in bundles with various breakouts using plastic tie wraps or waxed lacing twine.

Closed Bundle:

Wires are bundled with a covering, such as pulled-on braided tubing, braided-on Nomex or nylon, or in some cases, metal braid.

Waterproof Harnesses:

The junctions between the legs and backshells of the connectors are molded with a material such as urethane or rubber compounds.

Specifications of the Cable Harness

Components of Cable Harness

Wire

The role of the wire is to carry current to convey signals and provide power. It itself contains internal copper wires and external insulating materials. Commonly used specifications have a nominal cross-sectional area of 0.3, 0.5, 0.85, 1.25, 0.3, 0.5, 0.8, etc. Wires, each of which has a current value that allows the load, and reasonable use of electrical equipment for different powers, is the basis for a qualified harness. With the increase of the functions of automobiles, the widespread use of electronic control technology, more and more electrical components, more and more wires, the thicker and heavier the wire harness assembly becomes. In the future, the use of wiring loom wire will be reduced, and modern cars have introduced CAN bus configurations using multiplex systems. Compared with the traditional point-to-point configuration of the wiring harness, the CAN bus greatly reduces the number of wires and connectors, making the cable wire harness lighter and not limited.

Connector and Terminal

After the terminal and the electric wire assembly are crimped according to the standard, they are locked in the slot of the connector, and the male and female connectors are butted to meet the loop between the harness and the harness to the terminal. If it is arranged in the high humidity environment of the engine compartment, according to National regulations require that waterproof plugs be added.

Exterior Parts and Other Components

The exterior parts include a bellows, a polyethylene tube, a polyethylene cloth, a sheath, a sponge, a tape, a wire fastening harness bracket, etc., in order to place the wire to wear and break. Meet the temperature and humidity requirements of different positions of the body. Generally, corrugated pipe, polyethylene pipe, polyethylene cloth, hard pipe, and sheath are used to prevent the wire from being worn and broken. The wire is wrapped with thin-walled and thick-walled tape, and the wire harness is fixed at a suitable position in the vehicle body by using clips of different shapes. The purpose of the rubber ring is to prevent the wire cable harness from being scratched when it passes through the gold hole.

To learn more about wire harness cable assembly manufacturing, please contact graphic overlay manufacturers!

The HDPE mesh net is a food grade plastic raw material(HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form two molten filaments. Because the machine head rotates, the two strands of wire are joined together at one point, and then cooled and shaped into a net.  It has the performances of wear-resisting .corrosion-resisting, fine toughness; it can instead of metal wire.

The plastic net manufacturer is mainly provide products for aquatic using, poultry breeding, sericulture, civil engineering, sapling protection, garden course protection, railways, highways, roadbed reinforcement, etc

These HDPE flat net is extruded to diamond and square plastic mesh.Diamond netting is the most common type of extruded plastic netting.

Mesh-Image-4-Z-600.jpg

Feature：

High density polyethylene (HDPE) is made from naturally UV resistant materials

Do not absorb water and will not rot, but have a lower break strength than nylon.  It does not absorb water, there is less sag, therefore less adjustments are needed to the net

This netting for high temperature areas, and snowy climates,ultimately ideal for outdoor use.

Used as an electrical insulat

Most products from meyabond are available in bulk rolls or custom cut sizes. We provide Mesh net for sale,and provide the specific sized netting for your needs. Some of these services include slitting, sheeting, or die cutting.

The highway anti-collision guardrail is a typical cold-formed steel product. The specification is 4320*310*3. The steel strip automatic leveling adopted by the US R425 rolling mill introduced by the company, precision feeding and punching, 18-roller slow forming, computer cut-off Such advanced technological conditions ensure the shape and shape of the crash barrier panel to the utmost extent. Its cross-sectional dimensions fully meet the requirements of the YB4081-92 standard. Galvanized Steel Guardrail Product use: widely used in highways. Material: stainless steel metal High-strength guardrail board Technical field: The utility model guardrail board is mainly used for the division protection of highway lanes. If you want to buy it,please contact us,we can provide galvanized guard rail for sale.

The size of space

The size of the space is the size of the living room, movie room, etc. where you use the projector. If your living room area is more than 20 square meters, you can consider buying a led home cinema projector; if not enough, it is not recommended.

Price

The price gap of mini home projector is large, generally from a few thousand yuan to about 50,000, or even higher. The prices of foreign brands are higher than domestic prices. Domestic projection prices are lower. The reason is not explained in detail. For most consumers, products below 30,000 yuan can meet household needs.

Brightness

Brightness is one of the most important indicators for purchasing a projector.

Noise

Those who have never used a projector do not know that the projector will make noise when used. The noise of some projectors can severely affect viewing and is unbearable. When purchasing a projector, considering low noise should be an important part of the purchase. At present, many manufacturers have launched low-noise projectors, and the price is not expensive. Generally speaking, products with a noise level below 40dB are acceptable, but when buying, you should listen and compare yourself in a quieter environment to see if it will interfere with yourself.

Choose DLP or LCD

Whether it is LCD or DLP is actually not so important. What we need to see is the effect of the projector. And the effect of a projector is inseparable from many things such as lenses, light bulbs, and circuits. In principle, LCD projectors are the most common and their prices are relatively low. The biggest advantage of LCD projectors is that the colors are great. The three primary colors of red, green and blue are completed by three separate LCD panels. The brightness and contrast of each color can be controlled individually. And three colors of light can reach the screen almost simultaneously, so various colors can be reproduced realistically. Although the color reproduction of DLP projectors is slightly worse, the three-color light of a single-chip DLP projector is reflected by the same micromirror to the same pixel, and there is no convergence problem, so the black area is truly black, and the edge of the pixel will not appear Some burrs and shadows in the LCD. Therefore, when showing some thin lines, DLP projectors are clearer and sharper than LCD projectors, black and white are more pure, and gray levels are richer. Of course, the biggest advantage of a single-chip DLP projector is its small size and light weight. Many products even have only 1-2 kg. Generally speaking, DLP projectors are slightly more expensive. Seeing is believing. Whether it is LCD or DLP, it is recommended to compare carefully at the time of purchase.

Trapezoidal correction

In the use of the projector, the position of the projector must be at right angles to the projection screen as far as possible to ensure the projection effect. If the verticality of the two cannot be guaranteed, the picture will be trapezoidal. If it is not on the ceiling, but on the table, it is difficult for us to guarantee "vertical". In this case, we need to use the "keystone correction function" to correct the keystone to ensure that the picture has a standard rectangle. Keystone correction usually has two methods: optical keystone correction and digital keystone correction. Optical keystone correction refers to adjusting the keystone by adjusting the physical position of the lens; another type of digital keystone correction is software to achieve keystone correction. At present, almost all projector manufacturers have adopted digital keystone correction technology, and most of the projectors using digital keystone correction support vertical keystone correction function, that is, the projector can adjust its height in the vertical direction. The resulting trapezoidal is trapezoidally corrected in the vertical direction by the projector. The picture can be made rectangular, which is convenient for users.

For ICODIS,Feel free to write us for any and all enquiries, we're always happy to help and will answer as quickly as possible!

Locked air films are made from 100% recyclable air bag packing material, with outstanding impact resistance and puncture resistance. Its feature is designed to avoid crash during the transportation, absorb the shock energy by expanding the film without break up. Locked air films are strong, clean, low cost and environmentally friendly.

The LDPE based film is crystal clear, and with the customized logo print, that will increase opening impression. While the HDPE based film could be very thin to reduce the cost.

Our versatile model LA-E3S can support all kinds of film for your packaging safety in any need.

Technology of  cushion material for packaging :

Dynamic sealing technology, including linear pressure, temperature auto-adjustment and tension control.

Air control and patterned air channels design.

Supper long distance delivery system, C type pipe fill empty design.

Advantages of   air cushion film:

Strong sealing

No air leakage

Positive inside air pressure

High uniformity

Maximum value of film

High efficiency integration system

As one of the most professional air bag packaging suppliers in China, BJT company focus on providing the total best value solutions in inflatable protective packaging field.We own a number of patents and real case experience, also set new standards in kinds of applications.BJT company aims to make a substantial contribution to improve customer packaging safety, cost effective, and sustainability to ensure significant customer benefit.

BingJia Technology is the leading company of protective packaging machine & material with famous brand like Locked Air and Umailer. Providing air cushion machine, cushioning film, and customized packaging solutions for e-commerce, 3PL fulfillment, logistic, manufacturing, Cold Chain, Transportation, etc. If you are looking for Inflatable Protective Packaging, just contact us!

MYT company has over 15 years of manufacturing and exporting experience in HVAC duct industry line and sheet metal bending machine. Our machines can be customized according to client requirements.

Description of HVAC Duct Automatic Duct Line

HVAC auto duct production line, which means some duct manufacture machines work automatic and achieve high efficiency.

MYT company helps customers to choose the most suitable air duct manufacture line machines for them. Auto duct production line includes auto duct line 2, auto duct line 3, auto duct line 4, straight auto duct line 5 and U shape auto duct line 5.

Features of HVAC auto duct line:

U shaped auto duct production line 5：Small footprint than straight auto duct line 5, working functions and Speed is same as straight auto duct production line 5.

Straight auto duct production line 5: This linear machine has four coils, including leveling, grooving/beading, angle punching, cutting, Pittsburgh lock forming, TDF flange forming and bending.

Auto duct production line 4: This duct manufacturing equipment can finish all steps before duct folding, including leveling, grooving/beading, angle punching, cutting, Pittsburgh lock forming and TDF flange forming.

Auto duct production line 3: The duct line 3 machine can complete metal sheet leveling, grooving/beading, angle punching, cutting and folding with CNC automatic system.

Auto duct production line 2: This duct line 2 machine is very economic and finish 4 steps, including leveling, grooving/beading, angle punching, and cutting.

Waterproof flexible membrane switches  or more precisely a standard membrane switch assembly is comprised of several flexible layers that make up a complete switch package. This assembly can have as few as one active area (key or button) to several dozen active areas. A membrane switch and panel is an interface between man and machine, which enables an operator to communicate with equipment, instrumentation, or machinery. Subsequently, this allows the operator to communicate with the device, issuing commands and/or performing other operations. The operator presses the membrane control panel when he or she wants to control the device.

Construction of Membrane Switch

Graphic Overlay – PET/PC is usually the overlay material of choice due to its fantastic chemical resistance and flex property. We are professional membrane switch company in China.Komkey offers microwave membrane keypad customized design services such as digital printing, screen-printing, or apply both methods to ensure you get the right colors, textures and finish your design requirements.

Adhesive Overlay – This adhesive layer sticks the membrane overlay to the top circuit layer, and is usually an acrylic adhesive. The material is the same as the fourth layer. Only the thickness is maybe different according to the actual situation.

Top Circuit Layer – The material of this layer is specific. It is a 0.1mm thickness thermostable PET film printed with conductive silver ink and also dielectric oil, which used for fastening metal domes.

Circuit Spacer – This layer separates the top circuit from the bottom circuit so that the touch membrane remains normally break until the membrane switch keypad is pressed. The circuit spacer is a polyester spacer with adhesive on both sides.

Lower Circuit Layer – This layer is a 0.1mm-0.25mm thickness thermostable PET film printed with conductive silver ink and also dielectric oil. This layer terminates as a flexible tail that serves as an interconnector to controller PCBs or other IC.

Rear Adhesive – This adhesive layer bonds the entire membrane switch to the product surface, housing, or to a rigid support panel. Komkey, a membrane switch keypad supplier, can use the proper adhesive type and thickness to bond your membrane switch to your equipment.    

Membrane Switch Specification

Mechanical Properties:

Life Expectancy

Flat type ≥ 5 million times,

Tactile type ≥ 1 million times

Operation Force Flat Type 57-284g ,Tactile Type 170-397g

Dome Rebound Time ≤6ms

Tail Bending Performance ≤180 °

Switch Stroke Flat 0.1~0.5mm,Tactile 0.6~1.5mm

Vibration 20G's max.

Thickness 0.7~1.5 mm

Electrical Properties:

Rated Voltage ≤50V DC

Rated Current ≤ 100mA

Operating Power ≤1W

Insulation Resistance ≥100MΩ (250V DC)

Loop Resistance

10Ω ~ 2kΩ

(Depending on the design)

Contact Resistance

0.5 ~ 5Ω

(Depending on wire length and the materials)

Wire Lead Resistance <1Ω/cm

Base Material Voltage Withstand 1500V DC

Environmental Properties:

Operation Temperature -40°C to +80°C (-40°to 176°F)

Storage Temperature -40°C to +85°C (-40°to 185°F)

Atmospheric Pressure 86 ~ 106 kPa

Humidity +40°C, 90%~95%RH for 240 Hours

Why Choose Our Membrane Switch?

Our Membrane Switch Pad Advantages

Beautiful appearance, Variety color printing.

Small size, light in weight, good tactility, Long life span.

moisture-proof, dustproof, waterproof, anti-corrosion, and erosion of harmful gases proof.

Easy to operate, intuitive, safe and reliable

Cost-effective, convenient installation

Komkey is one of the reliable membrane switches manufacturers offering custom membrane switch panel design service  

Customized specification is available, the Smaller volume can be accepted.

Customized logo/Brand/Contact way can be printed in the overlay for advertisement.

If you wan to buy membrane switch,please contact us.

About Galvanized Electrical Pipe

Specification: 3/4”-6”

Raw Material: Q235, S235JR, SS400

EMT electrical pipe  scope of application: Excellent mechanical properties of the threading tube. Excellent corrosion resistance, high pressure resistance of the threading pipe and working pressure exceeding 2.5Mpa. The threading pipe has a smooth surface, small fluid resistance, no scaling, and is not suitable for breeding microorganisms. The coefficient of thermal expansion is small and does not shrink and deform. The epoxy coating layer of the threading pipe is more effective in solving the corrosion of metal pipes caused by water, buried and acid, alkali and salt, and the service life can reach more than 50 years.

Ground cover fabric：

Ground cover mesh,also as known as "anti grass cloth","weed mat","weed barrier",is woved by polyethylene or polypropylene material Striped every 12 inches for aid in plant alignment and is UV stabilized to last even in direct sunlight,which is widely used in agricultural insect netting.

It is mainly used for ground weed provention in greenhouse,drainage,maintain ground clean,ground mark and guidance and so on. Ground cover effectively helps block weed from growing and stealing required nutrients from your plants. Excellent permeability allows water, air and nutrients to get right to the root of the plants, creating healthy gardens and beautiful landscapes.

Really saving on labor and time costs.

These premium ground cover fabric are perfect for surpressing weeds in your garden, your outdoor rows, greenhouses, orchards and nurseries.

Feature：

Woven and UV Treated-Strong and durable woven fabric for reliable performance

Longer Life-UV stabilized for extended life

Breathable- Allows air, water and nutrients to pass through to plant roots

Palletized or Bundled Delivery - Available in various pre-packed sizes，Great for easy loading and unloading.

Multiple Widths - Ranging from 3 ft to 16 ft wide. Rolls are folded to a maximum of 8 ft. for easy handling, installation, and storage.

Meyabond Industry & Trading (Beijing) Co.,Ltd. As aprefessional horticultural netting suppliers is located in Babaoshan South Road, Shijingshan District, Beijing, China.It is an exporter and manufacturer of plastic netting strictly in accordance with ISO 9001 Quality Standard.

HOUSE FOR SALE - Available Immediately

1501 Ruatan Street
Hyattsville, Maryland 20783

Charming 3 Bedroom / 2 bath Brick Rambler. The front door opens to a cozy entry that transitions into a generous living room with fireplace for cozy winter nights indoors. The kitchen has new ceramic floor tile and is adjacent to an enclosed porch. Hardwood floors span the living room, hallway, and 2 bedrooms. Walking Distance to Shopping, Dining, and Public Transportation. Near West Hyattsville Metro Station. Come make this home Yours! Sold AS IS. Ready for New Owners!

Features and amenities:

•. New ceramic tiled kitchen floor
* New Basement Windows and Floor Tile
•. Newly tiled upper and lower bathroom floors
*. Central Heating and Air Conditioning
•. New Refrigerator
* Spacious Closets
•. Spacious Fully Finished Basement with Separate Private Entrance

Call Karmen at (240) 273-2584

In Asia, girls at weddings can choose not only white wedding dresses, but also traditional ethnic dresses. Like white yarn, traditional costumes in different countries have evolved over time.
Thai wedding dress
From the 1960s to the 1970s, Queen Sirikit was the fashion goddess of Thailand. Thai people all thought that she was dressed the most smartly.
It is believed that the Thai silk industry has been revitalized because of her. Thai silk is often the main material of Thai national clothing.

Afghan wedding dress
There are still nomads on the Afghan plateau who maintain their traditional way of life. People call them Kuchi. Their multi coloured wedding dresses are beautiful and colorful, their embroidery techniques are exquisite, their patterns are complex, and they are often sewn with metal and coins, which can be regarded as the high-quality products. When they get married, Afghans, rich or poor, are willing to spend money to make the wedding bigger and more prestigious. Green is the popular color of local dress. It's also the same when they get married. It's a religious issue. Islamic countries love green.

Vietnamese wedding dress
Vietnamese female are accustomed to wearing the national uniform "long gowns" on formal occasions. Long gowns are unique to Vietnamese women in ethnic costumes. They are usually cut out of light, soft and thin silk fabrics. They are similar to Chinese cheongsam in style. However, the trousers are cut high from the waist down, with loose trousers of the same pattern or white fabric. It is convenient to squat, sit and ride a bicycle.

Vietnamese long gowns are not very particular about their body shape, besides the exquisite handicraft. So everyone fits very well and looks good. Personal and clothes are both extraordinarily beautiful.
Many people are impressed by Vietnamese female wearing bamboo hats, jackets and pants.

The minimum width of the projector is unlimited. For the same projector, the distance is longer , and the screen is larger. The distance is closer, and the screen is smaller. If the curtain is too small to buy, you can customize it, or you can brush the wall white.

If you hang, use a dlp mini projector hanger, with one power cable, one audio and video cable. If there are many video signal sources, a video switcher can be added to switch TV programs, video players, camera videos, etc. together. The camera is easy to connect, just switch the camera video signal to the video switcher. It ’s free to see what you want.

The most important thing to pay attention to is: when shutting down, use the remote control to softly shut down, and then cut off the power after the fan has completely stopped, so as to truly cool the protection bulb. In addition, take a while to remove the air filter and clean it. And don't look directly into the projection lens, because it hurts your eyes.

Use a fixed universal hanger to install the projector. If it is an electric hanger, generally the hanger is fixed on the house beam and then the projector is hung, and the height is generally about 30cm below the house.

When you turn on the power switch, the bulb should be on, and the fan will start rotating. If the fan does not turn off, immediately turn off the power and stop using it, and ask for the reason.

All the cables must be embedded in place (video cable, audio cable, socket ...), the location of the portable dlp projector must be considered in advance, and the size of the projection cloth must be accurate. It is best to choose a socket with a switch if you want to place the projector in the ceiling mount position. If it's an electric screen, you also need to put the power there. It is best to make a ceiling cassette in the place where the curtain is hoisted, and it is necessary to strengthen the place where the curtain and the projector are installed.

For ICODIS,Feel free to write us for any and all enquiries, we're always happy to help and will answer as quickly as possible!