From the purpose of using automotive connectors,in order to ensure better driving of the car, Sunkye can divide the reliability of the connector into the tightness of the connector in use, the performance of fire protection, the performance of shielding, and the performance of temperature control.

Generally speaking, when discussing the tightness of automotive connectors, it does not only refer to the tightness to water. In this area, the current popular international management specification is IP67, and this specification is now the highest level in the automotive industry. Although the requirements for waterproofing are different in different parts of the car, many car manufacturers will choose IP67 to ensure the tightness of the connector of their car.

In the driving of a car, the power source is a very important energy source, which is not only related to the normal work of the engine, but also often involves the use of the power source when people are driving. So in the car's power supply system, car connectors have different divisions. Certain sealing measures can be implemented between the male connector and the device, between the male connector and the cable, between the male and female connector, and between the female connector and the cable.

In the realization of the sealing performance of automotive connectors, the seal ring is a commonly used tool. This tool can not only achieve the effect of fixing between different hole positions, but also the effect of sealing. It can not only ensure the stable operation of automobile equipment, but also ensure the waterproof performance of automobile equipment in work.

In the production of seal rings, silicon rubber is mostly used. This material is made by liquid silicon and solid silicon after certain chemical changes.

Now that electronic circuit technology is an important aspect of the automotive industry. In order to ensure the stable operation of electronic circuit technology, people have applied many shielding technologies in the production of automobiles. These shielding technologies not only play a protective role in the electronic circuit of the car, but also play a role in anti-interference and anti-radiation in the parts of the car. In addition, they can also protect the stable operation of the automotive connector.

Shielding technology can be divided into two types: internal shielding and external shielding. When using an external shield to protect a car connector, two identical shield shells are usually assembled to form a shield layer, and the length of the shield layer can cover the entire connector length. It is also necessary to ensure that the shield shell There are enough lock plate structures to ensure the reliable installation of the shielding layer. In addition, the shielding material used must not only be treated by electroplating, but also be treated to prevent chemical corrosion.

Ultraviolet light meter detects the intensity of ultraviolet radiation, and is used to measure the intensity of ultraviolet radiation in the fields of photochemistry, flaw detection, ultraviolet light source, plant cultivation, large-scale integrated circuit lithography, and polymer material aging.

Ultraviolet light is ultraviolet radiation, which is electromagnetic radiation with a wavelength of 100-400nm. It refers to the intensity of ultraviolet radiation per unit area. The instrument commonly used to detect the intensity of ultraviolet radiation is called an ultraviolet radiometer, also called an ultraviolet illuminance meter. Although it is called an illuminance meter, it has nothing to do with illuminance. Illumination studies the visible light that the human eye can see. The ultraviolet light meter measures ultraviolet light, which is invisible to the human eye, so it is related to the irradiance.

Irradiance is called radiant flux density and it is the integral of radiance to the solid angle. The area of the irradiance is integrated to obtain the power of the radiation.

Definition 1: Radiated energy projected onto a unit area per unit time.

Definition 2: The radiant energy received by an object on a unit time and unit surface. The unit is W / m2.

Definition 3: The radiant flux on an infinitely small bin containing the point divides the area of the bin.

Definition 4: Radiated energy projected onto a unit area per unit time. Irradiance (Ee, E) is a physical parameter, which is the amount of radiant energy received per unit area on a given surface. Unit: Watt / square meter.

The wavelengths measured by the UV radiometer are divided into UVA (320nm-380nm), UVB (280nm-320nm), and UVC(200nm-280nm). ShenZhen Xinzhibang UV Radiometer LS125 can detect UVC, UVB, UVA various wavelengths. It is widely used in sterilization, curing, pharmaceutical factory testing, sewage treatment, disease control center, non-destructive testing, welding arc testing, ultraviolet aging experiment testing and other industries.

Shenzhen XZBELEC Inst. & Eqpt. Co., Ltd company is established in 2011, Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd is a professional enterprise of instruments and meters.

Quick Stats

Project: Vietnam VT

Size: 10500㎡

Completed: Under Construction

Location: CAN THO

Products:Tantrum Alley, Hump slide, Super bowl, Water house, Wave pool

Vietnam Water Park (Water Amusement Park Equipment) is a theme park combined with water park and amusement park, located in Can Tho city which is 2 hours driving from HCMC. Guangzhou Haisan company provides water park design, equipment manufacture and installation supervision service for the water park. The area is about 11300 sqm., it is in a university which can rich the spare-time life of undergraduate.

The project plans to open to the public on February, 2018. The equipment include tantrum alley slide(tower height is 19m, 4 people/raft), boomerang slide(tower height is 14.5m, 2 people/raft), space bowl slide(tower height is 12.5m, 2 people/raft), middle water house, wave pool and water play, etc.. Since the main players are undergraduates, we choose some collective playing and thrilling equipment for this park. Tantrum alley, developed by Haisan, is the first one in Vietnam, not only rich the water park equipment’s variety in Vietnam, but also promote the Vietnam water park.

Looking for professional water park equipment manufacturer?

Up to now, Haisan has made over 1,000 domestic and foreign water parks which participates in design, manufacturing, installation and consulting management services.

The equipment has been exported to more than 30 countries and regions in Southeast Asia, Central Asia, West Asia, Middle East, Europe, Africa and South America.

Quick Stats

Project: Philippine Seven Seas Waterpark Equipment

Size: 35000㎡

Completed: Under Construction<

Location: Cagayan

Products: Whirlwind slide, Magicloop slide, Speed slide, Spiral slide, Whizzard slide, Boomerang slide, Wave pool, Lazy river, Aqua house, kids slide

As the leading water park manufacturer in China, in Cagayan,Philippines ,Our company Haisan is now building one new big water park named Seven Seas Waterpark.

Targeted to be completed this year, Seven Seas Waterpark and Resort- a world-class theme park- located in Barra, Opol is currently being constructed. Backyard Tornado Slide and other multiple adventure slides are expected to be enjoyed among Kagay-anons and tourists soon to be offered right in this said waterpark.

This Backyard Tornado Slide, that may seem similar with other foreign rides, will take you on a wild ride like going through the eye of a storm. Imagine you journey which will start from a high platform (of about 12m), then will have you blasted down to a huge log tunnel spinning around the Tornado’s funnel in a two or four person clover-leaf tube, swirling up and down the sides, before dashing through the eye of the storm to the calm waters below. This scenario is being expected but might not be the actual and is yet to be confirmed when the water park is open for the public.

Aside from the Backyard Tornado Slide, there are also major attractions people- kids and adults- can enjoy:

*1,000 sq.m. Aqua Playhouse Pool

*1,100 sq.m. “Slow River Ride”

*2,500 square meter (sq.m.) water combo wave pool

*12 meter high water slide towers and splash pools

*1,200 sq.m. Events Tent

*300 sq.m. Children’s Pool

This is a great opportunity for the province and of the City of Cagayan de Oro to boost tourism.

Looking for professional aqua park equipment suppliers?

Up to now, Haisan has made over 1,000 domestic and foreign water parks which participates in design, manufacturing, installation and consulting management services.

The equipment has been exported to more than 30 countries and regions in Southeast Asia, Central Asia, West Asia, Middle East, Europe, Africa and South America.

Quick Stats

Project: Thailand the Scenical World - Equipment for Water Parks

Size: 70000㎡

Completed: October 2015

Location: Khao Yai,Thailand

Products: Whirlwind Slide,Constrictor Slide,Magicloop Slide,Whizzard Slide,Speed Slide,Hump Slide,Water Dragon,Tantrum Alley Slide,Boomerang Slide,Super Bowl,Spiral Slide,Wave Pool, Lazy River

Thailand Greenery Water Park:Located in Khao Yai,Thailand, the total area of GP water park is about 70000 square meters, which is one of biggest water park in Southeast Asia. Haisan provides the following equipments: whirlwind slide, constrictor slide, magicloop slide, whizzard slide, speed slide, spiral slide, water dragon slide, tantrum alley slide, boomerang slide, super bowl slide, etc.

Looking for professional water park equipment manufacturers?

Up to now, Haisan has made over 1,000 domestic and foreign water parks which participates in design, manufacturing, installation and consulting management services.

The equipment has been exported to more than 30 countries and regions in Southeast Asia, Central Asia, West Asia, Middle East, Europe, Africa and South Americ

Application scope of water detector

Water finding: It is widely used in cities, mountains, and plains to quickly find and evaluate different types of groundwater. Determine the well location, the amount of dissolved water in a single well, the number of layers in the aquifer, and the depth of each layer.

Features of the water detector

1. Fast speed and high efficiency: Unlike conventional electrical measurement, the measurement speed is fast, and many profile measurement tasks can be completed every working day.
   
   Convenient to carry: This instrument uses the earth's electromagnetic field as the source of the worksite. It does not require bulky artificial power supply devices. The weight of the entire instrument does not exceed 2 kg, which is very convenient to carry and use.
   
   3. Simple operation: The instrument is fully controlled by a microcomputer, and all measurement operations can be completed with the touch of a button.
   
   4. Strong anti-interference ability: After the frequency selection and digital processing of the instrument by the instrument, even on the roads where urban vehicles flow continuously and in the work area with strong electrical interference, abnormal repeatable curves can be observed.
   
   5. Multi-azimuth, multi-frequency, multi-device and multi-parameter measurement methods are used to obtain various anomalous maps, to solve the problems of geological body position, orientation, thickness and burial depth, to improve the success rate of water and ore prospecting and reduce investment risk.ANBIT water detector is easy to operate and can be operated by 1-2 people. One-click mapping can shorten the measurement time.

ABT Drilling Equipment Co., Ltd. mainly provides holistic drilling solutions, serving the mining, stone crushing, water conservancy drilling industry, to help you solve the problem of drilling at high efficiency and low cost. We mainly provide mobile air compressors, drilling rigs, hammer, drill bit, crushers, underground water detector. We are your trustworthy partner.

The management of the drilling equipment in construction is essential to ensure its mechanical performance, prolong its service life and minimize the time loss.

More often than not, violations, which are prone to damage the drilling tools, tend to be practised subjectively and objectively in the drilling. Things will be worse by the ineffective control of the on-site mechanic, which, in the long run, suffers economically by the inferior mechanical performance, frequent failures, major repairs and the equipment scraped.

An overload operation of construction drilling equipment may be caused by the limited construction time, that is, the project management department and the on-site leader extremely overload thedrilling equipment in constructionto catch up with the construction schedule. Overload operations, which may be of pressure, tension, speed and torque, are likely to cause equipment damage and scrap and even lead to major safety accidents.

Even if the overload practise is luckily with no failure, the excessive wear and strain will shorten the service life of equipment. Besides, for some equipment in need of intermittent operation, a long-term continuous working will fatigue the equipment and degrade the mechanical performance, of which the immediate impact is the increase of the equipment maintenance cost while the indirect consequent may be safety accidents.

To facilitate the positioning of the bit, the DTH drill bit shall be in a state with a gentle impact power, a minor thrust force and a low rotation speed (water will be offered optimally in need of the dust clear). When the pit reaches about 10 cm inside the rock, maximize the impact power, properly increase the thrust and speed up the rotation (dust removal shall be with air-water mixture of a feasible proportion) to resume the routine drilling.

Once a DTH drill rod is done, stop the pneumatic motor and the supply of air and water. Then insert the fork into the drill rod slot of the holder and reverse the pneumatic motor. Finally, back the slide and separate the joint from the drill rod to connect a second one. Repeat the steps until all rods done.

The disassembly of DTH drill rods is semi-automatic, which is achieved by the cooperation of the drill rod unloader, the drill pit holder, two forks and the reversal of the pneumatic motor.

For disassembly, back the rotary machine to get the second slot (the slot near the middle of the joint) of the drill rod and the square frame of the holder reach the aligned position, where insert firmly with a fork.

Then the reverse the motor to get the first slot (the slot near the head of the joint) and the square frame of the unloader reach the aligned position, where insert the second fork.

Next, take out the first fork (the fork in the square frame of the holder) and use the propulsion cylinder to make the unloader drive the drill rod backward.

Finally, reverse the motor when the second slot of the second drill rod is opposite to the slot of the holder and remove the first drill rod when the screw in between is detached. Repeat the steps to disassemble the drill rods.

Family decoration pays great attention to beauty, not only the living room decoration is very important, but also the dining room area where we eat. When decorating, everyone will deliberately decorate the dining room, such as laying a vinyl placemats on the dining table, which can protect the dining table and beautify the dining room environment.

But there are so many kinds of tablecloths on the market. Many people don't know what kind of household tablecloths are good, so how to choose them? As a professional table runner manufacturer, Wantu answers this question for you.

There are many kinds of table cloth on the market, such as the color and pattern of table cloth. In addition, the materials for making table cloth are different.

The common table cloth in our life is made of silk, cotton, linen, PVC, fabric and so on. Among them, the table cloth made of silk and satin is expensive, and the table cloth as a whole is also of high grade, which is often used in some high-end places. Like cotton, linen and cloth art, table cloth has many colors, patterns and low prices, which are mostly used in families. There are PVC table cloth, waterproof, heat-resistant, easy to clean and other functions, the price is also cheap, the current home use more. Therefore, we need to choose the right table cloth according to the actual situation of the family. Here is how to choose table cloth.

How to choose the right table cloth?

Although the overall size of the table cloth is not large, that is, it is laid on the table, but in the actual selection process, it must not be arbitrary. Many people will choose their favorite colors and patterns to buy, but they often do not match with the family decoration style, so they do not play a certain role in decoration. We can choose according to the seasons and different occasions, so that it can be well matched.

If there are children at home, or lazy children, or busy people at work, PVC tablecloth is very suitable, not subject to high temperature and dirt, but also fire.

WANTU have a certain understanding of the selection of tablecloth. Wantu, a professional tablecloth supplier, provides all kinds of high-quality tablecloth. There is always one for you!

Interlaced scanning and progressive scanning are two techniques of book scanner camera are used to read and display image sensor information. Interlaced scanning is mainly used for CCD. Progressive scanning is used for CCD or CMOS sensors. How to check the scanning quality of the image? Here are three tips for mastering the scanning image inspection of auto book scanner.

1. Check image scaling range

For many primary users, checking image quality often means checking the hue of the image. They think that good colours are equal to good images. This is only one aspect of the problem. The most critical factor to look at an image is to check its scale, that is, the level of the image. And the so-called level is the varying degree from dark tone to bright tone in the image. To check the image level, we need to use professional tools, such as Photoshop and imagepais2.

The pipette tools in this software can check the level of the image, especially for the highlight and dark areas.

If a large area of white or black with the same value appears in the highlighted area and the dark area, or the change range of the value is very small, it means that the image level is poor. The images with good scanning quality have clear layers and even colour scale distribution. Besides, the "histogram function" in Photoshop can also help the user to check the status of the scanned image to see whether the continuous level smoothly transits from light to dark or whether there is a ribbon gap. If there is an obvious bandgap, the density value of the scanner selected by the user is low and should be adjusted accordingly.

2. Check image colour

When the image has enough layers, we should check whether the colour of the image is balanced, that is, whether the image is biased. The easiest way to check colour balance is to check neutral grey. Grey balance is a gradual process from the smallest black (0%) to the largest white (100%) in the image, and it is one of the important parameters for converting RGB to CMYK. Theoretically, mixing equal amounts of C, m, y inks will produce neutral ash. But in fact, due to the difference in ink quality, more or less will cause a certain proportion of deviation. Neutral grey can only be achieved in a certain proportion. Users can print from Photoshop

Inks setup function to determine the correct CMYK value.

The easiest way to check image colour is to open the info panel in Photoshop and move the cursor to the brightest highlight and darkest dark area of the image. Note the data displayed on the info panel. If the RGB value read in the highlight and low-key areas is between 250 and 5, it means that the colour range of the scanned image has enough details and the image quality is very good.

3. Check the brightness of the image

It is also important to check the brightness of the image. We compare it with the original to see if the scanned image is too dark or too bright. Too dark or too bright to get the ideal image. It is a simple method to adjust the gamma value when the image is too dark. But doing so will cause the scanned image to lose information. In fact, the easiest way to check the brightness of an image is to compare it with the original. In CYMK mode, try to read the colour value on the scanned image to see if it is close to the original.

In fact, the scanning process of fast book scanner has always been simple. But to get a high-quality scanning image, there are too many variables involved. If we want to get a perfect scanning image, the quality control of the scanned image is very important. And to achieve the above points seriously is undoubtedly an important factor to achieve perfect output.

This 8 Lug Wheel Spacers suit for the vehicle which it is 4 wheel bolts on the wheel.

We have chevy 8 lug wheel spacers,dodge 8 lug wheel spacers and ford 8 lug wheel spacers for you..

At present, the products of composite superhard materials are mainly divided into four categories: polycrystalline diamond composite sheets for oil and gas drill bits, polycrystalline diamond composite sheets for coal mines, polycrystalline diamond high-grade wire drawing mold blanks, polycrystalline diamond, polycrystalline cubic nitrogen Boron composite sheet.

(1) Polycrystalline diamond composite sheet for oil and gas drill bits

The oil and gas polycrystalline diamond composite sheet is a sintered composite of a cutting layer and a cemented carbide substrate layer composed of a mixture of numerous minute diamond particles and a binder under high temperature and pressure. It has high strength, hardness, abrasion resistance, impact resistance, and good self-sharpening properties, which make it applicable to the field of rock drilling. This product is mainly used as cutting teeth for oil and gas drills, and is the core component for cutting and boring on the drill.

(2) Polycrystalline diamond composite sheet for coal mining bits

Due to its high hardness, strong wear resistance, and good impact toughness, the composite superhard materials can be used not only for the production of petroleum and natural gas drill bits, but also for the production of PCD composite sheets for coal mining bits. Its use is not limited to drilling and cutting tools for coal field and mining operations. It can also be widely used to manufacture drilling tools in many fields such as building construction, hydropower engineering construction, rock drilling and crushing, and highway repair.

(3) Polycrystalline diamond high-grade drawing die blank

The wire drawing die is a very important consumable die for drawing wire by various metal wire manufacturers (such as wire and cable factories, steel wire factories, welding wire factories, etc.). The scope of application of wire drawing die is very wide. It is mainly used for drawing linear and difficult-to-machine objects such as bars, wires, wires, pipes, etc., and is suitable for drawing of steel and copper, tungsten, molybdenum and other metal and alloy materials. Composite superhard material is the most ideal material for manufacturing high-grade wire drawing dies.

(4) Composite sheet for cutting tools

cvd diamonds tool composites can be used to replace almost all traditional carbide tools and have a wide range of applications, including manufacturing automotive parts, processing wood, mining stone, CNC machine tools, etc. Due to the huge scale of its downstream industry, the market demand for tool composites is also huge.

8 lug wheel adapters help the vehicles with 8 lug wheels change to another 8 lug bolt pattern wheels, for example, you have the car with 8x6.5 wheels, but you have a new 8x170 wheel, and you want to install the 8x170 wheel on your car, then you need a 8 lug wheel adapter.

On the one hand, the number of 5G base stations in China has increased significantly. 5G communication spectrum is mainly distributed in high frequency bands. The higher the frequency, the faster the signal attenuation, and the smaller the coverage area at the same power.

In the 2G, 3G and 4G era, the spectrum of China ’s three major operators is mainly distributed below 2.6GHz, and the spectrum of China Unicom and mobile in the 5G stage is in the 3.4-3.6GHz range. With the increase of frequency, the number of 5G base stations will increase significantly and is expected to reach twice the number of 4G base stations.

On the other hand, the demand for 5G also brings the technological upgrade of connectors. Under the characteristics of 5G low-latency and high-bandwidth transmission, the data transmission volume has been greatly improved, and the traffic density of 5G has been increased to 100 times that of 4G. With the miniaturization and integration of 5G base stations, the space occupied by the connector is further increased. Compression, electromagnetic interference and heat dissipation have also become important issues.

Therefore, 5G has higher requirements for the density, transmission rate, heat dissipation, electromagnetic interference resistance and reliability of the connector, and the value of the connector has been further improved.

With the increase in the number of base stations and the increase in technical requirements, the connector market is expected to grow significantly and enter a high-boom cycle.

According to the forecast of the Ministry of Industry and Information Technology of China, domestic operators' investment in 5G will be 1.5 times that of 4G, and the total investment will reach 1.5 trillion yuan. As for the pace of demand, with the start of 5G construction in 2019, the scale of 5G base station construction will also Will grow rapidly.

Military connector manufacturers have deep technical accumulation and strong competitiveness, which will fully benefit from the growing demand for connectors in the communications field.

Sunkye is uniquely qualified to deliver turnkey custom solutions and Mil-Spec military connectors manufacturer for a complete range of high-performance applications. Our industry-leading materials knowledge, engineering design experience, and testing capabilities are key to achieving reliable service in the most extreme environments.

Brightness is the light intensity that the 720p mini projector outputs to the screen, and also the brightness of the projected image. In general, the higher the brightness of the projector, the brighter the image of the same size projected on the screen, and the clearer the image. However, the brightness of the image that our eyes can perceive is not only determined by the brightness of the projector, but also greatly related to the intensity of the ambient light and the size of the image. The stronger the ambient light, the dimmer the brightness of the image perceived by our eyes. Therefore, users must choose the appropriate brightness according to the environmental conditions of their projector. It is not necessarily as bright as possible. In the case of the same other indicators, the higher the brightness is, the higher the price of the projector will be. At the same time, the brightness of the image perceived by our eyes will have a certain range. Beyond this range, the our eyes will feel uncomfortable, especially after watching the image with high brightness for a long time. Our eyes will feel tired and may get hurt to some extent.

It is necessary to remind the user that in addition to choosing the brightness index according to the space size, the user should also consider the lighting conditions of the use environment, screen type and other factors. Under the same brightness, different ambient light conditions and different screen types will produce different display effects. When users choose 3500 lumens projector, they should have a margin for brightness index. Because the brightness of the projector largely depends on the light bulb in the projector, the brightness output of the light bulb will decline with the use time, which will inevitably cause the brightness of the projector to be declined. After 2000 hours of use, the brightness of the projector product decays rapidly, so when users choose the projector product, they must have a comprehensive consideration of the brightness index.

Generally speaking, in the 40-50 square meters of home or reception hall, it is recommended to choose 800-1200 lumens for projector brightness, and 60-72 inches for screen; in the 60-100 square meters of small conference room or standard classroom, it is recommended to choose 1500-2000 lumens for projector brightness, 80-100 inches for screen; in the 120-200 square meters of medium conference room and ladder classroom, it is recommended to choose 2000-3000 lumens for the brightness of the projector, and 120-150 inches for the screen; in large conference rooms or auditoriums with an area of 300 square meters, professional engineering machines with an area of more than 3000 lumens should be selected most 720p projector, and the screens should be more than 200 inches.

Wedding dress pickups

Petite body: thin and small

Suitable wedding dresses: The girls of this size are not suitable for simple and luxurious dresses. Because it seems that you are wrapped in a dress, not you are wearing a dress. A tight-fitting or A-shaped wedding dress is the best.

Note: Basically all styles of skirts are suitable for you, except for the prom style will be too heavy.

Short waist body: shapely

Drop waist ball gown wedding dress: The right wedding dress for girls with short distance from rib to hip is a princess wedding dress. This type of wedding dress highlights the chest, the hem naturally spreads out, can stretch your body, and it will look elegant. Low-waist wedding dresses can also have this effect. If you feel that your shoulders are beautiful, try a wedding dress with a shoulder or a collar.

Note: A tight-fitting wedding dress will make your waist look shorter.

Thick waist body: well-proportioned, but the lines are not obvious

A suitable wedding dress for girls with no curves from shoulder to hip is a high-waisted wedding dress. It hides your waistline and makes you look slimmer.

Note: Princess-style wedding dresses and tight-fitting wedding dresses will attract the attention of others to the waist, which not only can not cover the thick waist, but highlights the shortcomings.

Full-bodied body: plump chest, a little belly, round hips.

Suitable wedding dress: the prom dress can hide your clams very much. A-line skirt is also very suitable.

Note: tight fitted wedding dresses will make you look fatter and avoid slings.

6 lug wheel spacers for trucks the vehicle which it is 4 wheel bolts on the wheel.We provide various of sizes of 6 lug wheel spacers for you, such as chevy 6 lug 1 inch wheel spacers,chevy 6 lug 1.5 wheel spacers，3 inch 6 lug wheel spacers and so on.

美国社区大学转学

美国社区大学转学 是美国高等教育体系的重要组成部分。中国的学生和家长不了解美国社区大学，误以为美国社区大学类似国内的职业院校。其实 美国社区大学 在美国当地是非常受欢迎的，有50% 以上的学生在高中毕业后都选择到社区大学继续学习。

美国社区大学

社区大学（Community College），通常又被称作社区学院，是一种提供两年制学位的高等教育机构。社大主要提供美国四年制大学前两年的通识学习课程与教育基础，完成社区大学学业可获得副学士学位（Associate Degree）。美国社区大学鼓励学生转学，为学生们提供各种教育支持、制度支持、服务支持，转学到四年制大学继续完成学士学位（Bachelor Degree）。

社区大学与许多顶尖四年制大学有转学协议（TAG，Transfer Admission Guarantee，即转学入学保证），是许多学生进入名校的重要跳板，只要学生修满学分，在校成绩也达到指定要求，即可顺利转入有转学协议的学校。近年来收益于TAG政策的中国学生呈直线上升趋势，越来越多的中国家长向求真教育咨询美国社区大学。

W同学案例

W同学在广东一所普通高中，跟众多高考生一样，寒窗苦读数十载，奈何成绩总是上不去。在高考这条独木桥面前，众多高考生犹如万马奔腾，千军抢过独木桥。在如此激烈的竞争下，W同学心有余而力不足，语文成绩总是提不上去。高考成绩出来的时候，语文成绩还是严重拖后腿，最终只能去到一个大专院校。W同学心有不甘，努力了还是这样的结果，但又无济于事。在苦闷之际，W同学萌生了出国留学的想法。他的这个想法也得到了父母的支持。

对比了众多的留学机构后，W同学了选择了求真教育。求真教育的老师根据W同学的情况，认为W同学的高考后留学，不想浪费一年时间去准备托福、AP成绩，又想去到美国名校读书。那么走社区大学转学这条弯道超车的路最合适了。

社区大学的录取门槛低，以W同学目前的成绩和GPA分数能去到不错的社区大学。选择社大转学这条路的关键在于社大两年的课程规划，这决定了两年后能否顺利转入名校。因为四年制大学在接受转学生的时候，对学生的选课、专业课都有不同的要求。

求真教育老师对W同学进行了选课指导，科学合理地选课，可以让W同学拿到高GPA，也能最大限度地将已修学分转入四年制大学。在求真老师的规划下，W同学大二结束的时候申请到了加州大学洛杉矶分校。

求真寄语

W同学一家对于这个申请结果感到非常满意，在国内上不了一个好大学，在求真老师的科学规划下，完美逆袭顺利进入美国名校。W同学的这华丽转身，绝不是偶然，除了他自身的努力外，还得益于求真老师的合理规划。如果你也跟W同学一样想弯道超车进入美国名校，就快来联系我们吧。更多留学资讯，尽在求真。文章来源：https://indeededu.com

美国大学转学录取率能够帮助学生更好地把握美国转学趋势并且提前确定好想要转学的梦校。对于很多不满意自己学校排名，或者想从社大转学到加州大学、纽约大学等排名靠前的学生而言，美国大学转学是实现弯道超车的重要捷径。那今天小编就和大家一起来深入了解美国大学转学录取率。

加州大学依旧强势

说起美国大学转学录取率，就不得不提加州大学系统。作为对转学生十分友好的一个学校系统，加州大学的九所学校都接受学生的转学申请。而且以加州大学洛杉矶分校为例，本科新生直接申请的录取率是16%，而转学的录取率竟然达到了26%。另外，加州大学的TAG转学保录协议也很受学生欢迎。只要在大学前两年的学习中保持高GPA，并且修满转学所需要的课程学分，就可以直接转学加州大学圣塔芭芭拉分校、尔湾分校、戴维斯分校等名校。

而加州大学系统也是非常欢迎社区大学的学生进行转学，具有相当高的优先级。美国大学前两年实行通识教育，学生们通过修读英语、数学、人文科学、社会科学等课程，获取足够的转学学分后，就能递交申请。当然，加州大学转学除了看重学生们的硬性条件外，软性条件如课外背景提升活动、社团经历、志愿者活动都是录取的重要考量因素。近年来，随着转学人数的不断增加，加州大学的转学录取率也有收紧下降趋势。因此，对于有志冲击加州大学名校的同学而言，一定要提前做好准备规划，让自己赢在起跑线上。

东部大学大有崛起之势

东部大学如弗吉尼亚大学、波士顿大学等大学以超过40%的美国大学转学录取率受到了很大的关注。而传统名校如纽约大学、波士顿学院等依旧保持着20%以上的转学录取率。美国每年有250万学生进行转学，但同学们在进行学校和专业选择时，也应该注意竞争的激烈程度，最大化选择和安排适合自己的转学计划，注重冲刺梦校的同时，也要选择自己比较有把握的学校。美国求真教育成立于2007年，拥有超过12年的转学辅导经验，目前已经帮助上千名学生成功转入自己心仪学校。不论你是想要冲刺排名更高的学校，或者是想通过社大这一跳板实现华丽转身，求真美国大学转学服务都会是你不二的选择。

机会总是留给有准备、有雄心的人

美国大学转学是一个准备时间长、准备材料复杂以及需要提前规划的过程。很多同学虽然有了明确的方向及目标，但对每所学校的要求不了解，而且不会正确合理地选择自己的课程。求真教育了解到很多同学对加州大学洛杉矶分校和伯克利分校都特别感兴趣，但自己连基本的转学课程要求都不了解，甚至缺乏了转学最基本的英语课和数学课。

另外，很多同学在选完课后以为可以通过期末考试挽回自己平时因为贪玩而早退迟到失去的分数，殊不知赔了夫人又折兵。尽管好几个晚上通宵复习，希望临时抱佛脚，但最终无补于事，好几门课拿到了F的成绩，这无疑会对之后的转学有极大的影响。正确排课是成功转学的第一步。打个比方，如果学生对工商管理专业感兴趣，却在大一大二选了许多数据统计课程，这无疑会增加学生的压力，消磨学生的自信心，并且不利于之后换取课程学分。

在正确选课之后，我们需要在平时把自己的GPA保持好，并且适当地在日常学习和课外活动中锻炼自己的领导力、团队合作能力以及创造力。这样我们才能更好地为之后的文书提供优秀素材，以及在填写网申时更好地向招生官展现多面的自己。值得注意的是，美国大学规定本科GPA不能低于2.0，否则将面临停学、开除的处分。因此，大家在平时一定要踏踏实实地把自己的成绩提高，不能存有侥幸心理。

求真寄语

美国大学转学录取率能够帮助学生更好地了解一所学校对转学生的欢迎程度。想要了解完整的榜单可以咨询你身边的求真老师，我们将在第一时间为你提供最有用的转学小贴士，让你事半功倍。求真专业咨询、规划、申请以及文书团队，也会全程保障，助你实现名校转学梦想。文章来源：https://indeededu.com