Blogs/News/PSAs

In 1909, Taft took off to Atlanta, Georgia, where the local Chamber of Commerce hosted him with the traditional ‘possum and ‘taters. The dish is basically to put the possum on the sweet potato and then put it on the table. Suddenly, the orchestra sounded and the guests began to sing, and then they presented another gift: a possum doll.

This toy was completely original to the locals. Later, the team of Taft took the toy “Billy Possum” to try to replace the teddy bear. “LA Times” also reported that Billy Possum has replaced the status of teddy bear stuffed animal. In the next four or even eight years, American children would hold Billy possums.

At the time, Billy Possum did set off a wave and toy stores from New York to San Francisco are all on sale. But you probably know the ending of Billy Possum, because people in our time have never heard of this toy! In fact, in just a few months, Billy possum was completely forgotten by consumers, and the craze did not even last until the Christmas of the year!

Later generations have several explanations for why plush teddy has always been popular, but Billy possum has survived for a year. One of the arguments is simple, that is, Billy possum is too ugly. Others think that this is related to the story of the origin of the two toys. After all, the story of the origin of the joy toys teddy bear shows the compassionate spirit of President Roosevelt, and the Taft is just sitting there and eating the possum.

What more people don’t know is that the story of President Roosevelt and the little mother bear did not seem so warm on the surface. Old Roosevelt is a hunter after all. He is not an animal conservation expert. Although he refuses to shoot the mother bear, his compassion is very narrow. After he put down the gun, he immediately turned his head and said to the assistant “to solve his pain.” The assistant immediately cut the neck of the mother bear with a sharp edge.

Later, they took the mother bear back to the camp and enjoyed a few days of bear meat. Ironically, on the last day of the hunting trip, they just finished eating the mother bear, baking the bear’s paw, and the dishes on the side are ‘possum and ‘taters.

I didn’t expect the story behind the teddy bear to be full of blood…

Despite this, teddy bears have become popular in the world. Many children and even 20- to 30-year-old adults’sleeping companions are still plush teddy bears who have been with them for many years. They find that they are used to sleeping with them. Without it, they can’t sleep at all. The raw materials of the teddy bears produced by YZJOYTOYS are in full compliance with EU and American standards. Sleeping with a teddy bear and even a teddy bear bite will not cause any harm. We accept all OEM processing and can design your own unique teddy bear according to your preferences.

We YZjoytoys have professional proofing design personnel who can make the customer’s design sketches into solid plush toys. The sample can generally be completed within one week. And it can be repeatedly modified according to customer requirements until satisfied. Customers can also copy and quote.

Not only does Toys R Us have exclusive toys, but other retailers also have it. For example, sam’s club stuffed bear will have some exclusive Fingerlings and LOL Surprise sets.

According to Popsugar, there are some new toys in each category. Think about it before you think you will only come in and out of the store with one thing. There is an exclusive L.O.L. Surprise Pets, (KidKraft Lola Mansion), and a personalized Character Plush Saucer Chair.

Commodities will decrease in mid-October, so you can’t miss them.

What are the exclusive toys of the Sam Club? There are several.

The Fingerlings will have a new role. It will be dominated by Coral and Callie. These two characters will appear in a series for $30. There is also a very cool seesaw in this suit to add fun.

There is also a special LOL surprise package released with KidKraft Lola Mansion. It is a 4-inch toy house for $150.

There is also a cute dish chair made by an American child. What makes it special is that it has two cute ears made of plush. The price is $30.

We YZjoytoys have professional proofing design personnel who can make the customer’s design sketches into solid plush toys. The sample can generally be completed within one week. And it can be repeatedly modified according to customer requirements until satisfied. Customers can also copy and quote.

All along, there have been many stalls of novice friends consulting entities where to buy good? Where can I get into the cheapest stall? And so on. Today, we share with you the cheapest source of stalls in the preferred wholesale city: Yiwu, the next article is Yiwu wholesale market guide.

Be careful:

1. Before you go there to buy yiwu goods, what is the purpose of your trip? That is to say, the main thing to see is what goods, casually look at the heart will only see nothing.

2. How much does the purchase price want to be less than? Which varieties are going to be introduced? And so on and so on related questions, you must plan in advance and then go to purchase. Speaking of booth goods, how can we get less of the capital of small commodities, Yiwu, Zhejiang Province? The cheapest vendor city: Yiwu, Zhejiang.

Yiwu Market: I believe that you should be familiar with this place. If you want to enter cheap and varied sources of stalls, you should first promote Yiwu, Zhejiang Province.

International Trade City (Phase I): Intersection of Huancheng East Road and Chouzhou North Road; Handicrafts, Jewelry, Toys, Flowers

International Business City (Phase II): east of North Road of Chouzhou and west of Futian Road; hardware, electronics, bags, rain gear, clocks and watches, etc.

Zhanyuan Market: No. 51 Zhanyuan Road; Daily Department Stores, Ribbons, Shoes, Needles and Cotton, Style, etc.

Binwang Market: No. 158 Binwang Road; Clothing, non-staple food, tie, bedding, towels, plush, dried fructose, knitted cotton, textiles, cosmetics, etc.

Knitting market: 93 Chengzhong Road; Socks, socks accessories, raw materials

Household appliances market: 101 Binwang Road; Various kinds of household appliances

Communication Market: 211 Binwang Road; Various communication tools

Computer Market: Computer, Computer Consumables

Material market: No. 199 Chengxi Road; Aluminum products, clothing materials, ceramic building materials, stone materials, decoration materials

Wood market: 266 Chengxi Road; wood-based panels, wood threads, wood flooring, decoration, hardware, buttons, paints, logs, bamboo, doors and windows processing

Furniture market: 238 Binwang Road; Furniture, office appliances

Agricultural Trade City: Overpass of Midwest Road; Fruits, cereals, oils, vegetables, flowers

Market of means of production: No. 251 Chengxi Road; Decoration materials, plastics, metal materials, building materials

Cosmetics market: 238 Binwang Road; various cosmetics, cosmetic appliances

Garment Market: First Floor of Binwang market area A, first floor of area B, clothing and furry

Non-staple food market: non-staple food, groceries, dried fruits, candies and fried goods on the first floor of area D and C of Binwang Market

Tie Market: Ties on the 2nd floor of Binwang market Area D

Bedding Market: Bedding, knitted underwear, shirts on the second floor of area A and area B of Binwang Market

Lace Market: Various Laces on the 2nd Floor of Binwang Market Area D

Towel Market: Towels on the third floor of Binwang Market area C

Textile Market: Textiles and Fabrics in Area E of Binwang market

Eyeglasses Market: North Side Eyeglasses of Zhengyuan market

Cultural goods market: Cultural goods

Knitting raw materials: all kinds of knitting raw materials on the second floor of the knitting Market

Yiwu is the sea of small commodities in the world. There are many kinds of products that can be wholesaled occasionally. Different kinds of products have different products gathering places. However, Yiwu's largest and most influential wholesale market is the International Trade City, also known as the Futian market.

Futian wholesale market can wholesale a lot of products, but also more complete, the daily flow of people is also very large, so there are many vehicles to go there. Almost every bus stop has a bus to the Trade City, but the stops are different. But in fact, the goods in the commercial city are really not cheap, and they are really cheap to sell in some other wholesale markets. These are the professional stall wholesale markets. There are railway stations and airports in Yiwu. The railway stations and airports are several kilometers apart. So it's convenient to inquire about the number of routes before you go, take a bus to the city and then go to the city.

TOP EASE deals in general merchandise, we have a variety of products to offer our customers and we can provide you with best yiwu agent service, which makes it much easier for our customers to find all the items one time. I hope you can use this Yiwu wholesale market guide to find the goods you are satisfied with!

(1) Planning

In order to improve timeliness, project, and parts should be planned in detail. Planning at the level of the injection project and each individual part is the key to achieve timeliness. The planning system can plan all process steps in detail and provide a capacity overview so that the relevant personnel can grasp the demand for each technology and the corresponding available capacity. In order to improve the timeliness, there should be further algorithms in the planning system to find the optimal sequence of production operations. Based on tablet or smartphone applications, management can track the status of key projects at any time.

(2) Automation

The second key area of action is automation, where automation solutions help to improve equipment utilization. Observing the proportion of manufacturing cost in the whole process chain in Figure 9, it is easy to see the benefits of automation solutions adopted by German injection molding enterprises. In Germany, only 34% of the cost of injection molding is spent on manufacturing, while 52% of the cost of injection moulding company China is allocated to manufacturing. The main reason is that German injection molding enterprises are highly automated in milling and EDM. Automation is one of the key areas in which German injection molding enterprises have made great progress in the past 10 years.

(3) Digitalization and visualization

For many injection moulding companies China, quality remains a challenge. In order to reduce quality errors, it is important to identify errors early in the order completion process. Many errors are found in the late stage of the process chain, such as in the test, which will greatly increase the cost and time needed to correct the errors.

(4) Tool management

In order to further improve the processing efficiency, tool management with a clear structure is the key factor to achieve high-efficiency manufacturing. The unreasonable tool management results in more preparation time for injection moulding company China in the processing process. By centralized management of tool data and focusing on a certain number of standard tools, production efficiency can be effectively improved. Data matrix code (DMC) can be used to mark the tool, and the central tool management system can be used to register, manage and call the tool data. In this way, the central tool management system can record the tool wear condition, and invoke the actual data of the tool in the programming and processing process, so as to improve the machining accuracy. Meanwhile, structured tool management can save time and space, and tool standardization can reduce errors in workpiece preparation and facilitate clearer arrangement of tools and their accessories.

Established in the year of 1996, HanKingtec. starts the business in mould engineering, after years of development, we have become a one-stop total plastic injection molding solution provider which including mold making, injection molding, second process and final assembly.

誰も都市の拡大を止めることはできず、誰もごみを止めることはできません。しかし、近隣諸国は、人口密度が非常に高く、生活水準が高い先進国として、人口の多い国と工業国であるごみ包囲という共通の問題を抱えていません。現在、日本の一人当たりのごみの年間生産量はわずか410キログラムであり、これは世界で最も低く、いくつかの貧しい農業国よりも低いです。世界的に有名な上勝町は、15年間「廃棄物ゼロ」であり、高品質の環境で豊かになるための世界のモデルです。今日は、この村の様子を見てみましょう！

上勝町は日本の南西部、徳島県に位置していて、非常に辺鄙で、最も近いコンビニから車を往復するのに40分かかります。そのため、ここは多くの辺鄙な山村と同様に、人口が流出して、深刻な高齢化です。人口は1500人前後で、半数以上が65歳、20%以上が80歳以上。

もともと上勝町は林木業とミカン栽培が主であったが、六七〇年代の日本経済の高度成長に伴い、木材の輸入量が急増して地元の販売量に影響を及ぼし、さらに1981年には珍しい寒波が小村に壊滅的な打撃を与えた。失った経済的支柱や労働力が上勝町を衰退の気配にさせ、町役場と住民は共同で株式会社彩を設立し、不思議な商品、葉を販売することにした。

上勝町は200年前の姿をそのままに「日本の原風景」とも呼ばれ、日本で最も美しい14の村の一つに選ばれている。ここは風景が美しく、四季がはっきりしており、季節ごとに代表的な植物がある。料亭では葉で食膳を飾るのが好きだったが、上勝町では葉がレストランの需要に合って、村の住民たちは葉を売って金を稼ぐようになった。

当時の上勝町にはゴミ回収の概念がなく、多くの農村と同様、住民がゴミを焼却するか、山に捨てるかのどちらかであった。

しかし、ごみを焼却する過程で発生した各種の有害ガスは、本来の自然の美しい町の緑がなくなり、川の水が汚くなったことに住民の注意を引いた。

そこで、2000年には町にたった2つの焼却炉を閉鎖し、汚染ゴミの焼却を根絶した。2003年、町は「ゴミゼロ」宣言を公式に発表し、2020年までにゴミが発生しないように、あらゆる物を廃棄する際に回収しなければならないと訴えた。

ゴミ分類システムを知った住民の反応は、私たちと同じでだった。上勝町の住民にとっては、ゴミの分別には時間がかかるばかりか、記憶力も試され、作業が不便になっただけではなかった、しかし、すばらしい環境のために、村民はすべて堅持することを選んだ。これが15年です 。

ごみの分別が最初の負担から上勝町人独特の生活様式になり、住民たちも「ごみ」を差別化し、地方から来た料理人も徐々に同化していった。

堆肥以外の町にはゴミ箱もなく、ただ一つのリサイクルセンターに各種ペットボトルやアルミ缶などを送ってリサイクルしている。

もちろん,ごみの分別回収が実施される過程では上勝町も順風満帆ではなかった。ここは土地が広いので、ごみ収集車をすべての場所を踏破させるとコストが非常に高くなり、この地方に適したごみ回収案を見つけることが急がれる。

調査の結果、彼らはこの地方のごみの30%はすべて生ごみであり、つまり残飯であり、持ち出して処理するより、直接現地で解決した方がいい。そこで政府は、ごみ処理机器を1万円で買えるように補助金を出し、自宅の調理費を畑の肥料に転換し、普及率は今では97%に達しており、「生ごみ」を捨てる必要はほとんどありません。

生ごみの処理問題を解決し,残りは楽になった。町にはゴミ回収センターができて、毎朝7時半から午後2時まで運営されていて、村の人たちは自分でゴミを持ってここに来る。

最初は9種類のゴミを分別していたが、村人たちによって徐々に研究・学習され、現在は45種類になっている。彼らの分別の細かさには驚かされる。

ミネラルウォーターのキャップ、シール、ボトルの本体は分けて分類して、ガラスも得点色のガラスと無色のガラス;口紅の体は「可燃物」に属して、口紅の管は「小さい金属物」である;片方の靴下は「燃える物」で、片方の靴下は「古着」になります。牛乳パックでも、必ず平らにして、洗って、乾かして……

ゴミの分別が厳しいほか、町では何度も品物を使うことを奨励している。例えば、町ではクルクルショップを開いており、住民は遊休している古物を無料で交換している。くるぶし工場は多くの労働者を雇用し,廃棄物から袋や衣服,おもちゃを作り,一部の就業を解決しながら資源を活用できるようにした。廃品回収で年間250万円から300万円の収入を得ることができる。

町には、ゴミの分別を専門的に教育し、宣伝する学校であり、無駄やゴミのないことを宣伝する多くのイベントが行われている。

最も特筆すべきは、町のシンボル的な建物、倉庫、ビール工場、バー、BBQ機能をカバーするごみゼロのビール工場である。醸造所で使われている建築材料のほとんどは回収された廃材で、その中の一面の高さ八メートルの壁は村の廃窓から作られている。レストランの中庭には色とりどりのシャンデリアが弔り下げられている。回収された瓶から。建物の外周の木材は町の木材工場で加工された角材を用い,タイルは廃屋から集めたものである。環境保護は良い循環であり、他の産業の発展を促進する。上勝町には温泉が多く、ホテルではバイオ燃料で暖房し、年間7万6000ドルを節約できる。二酸化炭素の排出を減らし、環境や温泉に観光客を呼び込むことで、上勝町の経済性を高めている。

一方、日本料理が世界の無形文化遺産に登録されたことで、花飾りとして人気を集めています。日本料理は「五感五色」の目、鼻、耳、白、赤、青、特に視覚の美感を重視して、特に芸術というべき懐石料理は、四季の時系列の異なった花と葉に対応します。上勝町はきれいな水と空気を頼りに、雑色や汚染のない木の葉を育ててきた。食用とされる葉は年間320種類があり、采取された葉はその土地のきれいな水の中できれいに洗浄され、大きさや形に応じて選別される。選別した葉は日本各地の料亭に売られ、北米や欧州のホテルやレストランにも輸出されており、葉を採取する企業の年間売上高は130万ポンドに達する。

日本の花飾りの80%はここから来ます。高級料亭では、形、大きさ、色、季節感など、花の葉の選択に厳しい要求があり、このような高品質の葉は、恵まれた上勝町でしか産出できない。高齢者の就職も順調に進んでいる。採取は労力のかかる作業ではなく、採取、洗浄、選別だけでよいからだ。退職したお年寄りのためにならなければならないことは言うまでもないが、お年寄りたちは、葉を摘むという新しい仕事にも情熱を持っており、どんな季節にどんな葉を摘むかを知る専門の木の葉ファイルを作っている。ITスキルまで身につけ、パソコンで業務を簡素化し、インターネットで木の葉を売るようになった。「回収」、「再利用」、「ゴミ分別」など、私たちがよく口にしていた概念が上勝町人の血の中に溶け込んでおり、彼らがそれを守ってきたのは、政府の支援を除けば、自然への畏敬と愛情が根底にある。

上勝町のほか、古川町のエコで豊かになった経験も評価に値する。1968年、日本古川町の瀬戸川地区では、住民たちが川辺をきれいにするために、「国魚」錦鲤3000匹余りを臭気の薫る川に投入し、環境を整備しようと決心した。

実際には、日本だけでなく、世界各地の都市でごみゼロの努力を続けている。2015年、サンディエゴは2030年までにごみ処理量を75%削減する計画を発表した。ニューヨークは15年以内の「ゴミゼロ」を望んでおり、上勝町よりも長い時間をかけてゴミと闘っている都市が多い。

ニューヨークやロンドンのような国際的な大都市ではなく、上勝町は過疎の小さな町に過ぎず、教育水準はあまり高くなく、交通も不便だが、大都市では難しいことをやっている。で勝の町の住民もかつて経験してごみの分类する惶然困惑と各種惯れていない、しかし今、彼らはゴミに分類熟練工、あなたもで勝町の住民たちのように、思考パターンを変えて努力実践から参加のごみの分类する人が多いが、これも一革新の運動場になった。

村の振興、村の改造にとって、上勝町は間違いなくまた私達に1つの授業を与えた:環境が居住しやすくて、持続的な発展の村、人々が農村に入ってきて、村の繁栄とにぎやかな光景を再現することができる。

┃代　 表：榊原康寛

┃所在地：東京都千代田区大手町１-7-2

┃会社名：株式会社ブルーエコノミー

┃設　 立：2005年３月

┃資本金：3,000万円

┃業　 種：環境ソリューション

A laser printer is a kind of output device which integrates laser scanning technology, electronic technology, electrostatic imaging technology and so on. It has the characteristics of fast printing speed, good printing quality, high resolution, and low noise. It is an important computer peripheral equipment. With the emergence of a network printer, it is widely used in office automation, printing, publishing, scientific research, and other industries.

Typical faults and maintenance methods

Fault 1

The image of a laser printer is obviously black and white on one side. After replacing the toner cartridge and cleaning all the components, the fault still exists.

Maintenance method: through the maintenance of the optical part of the laser printer, the fault is solved. It is mainly to open the shell of the laser printer, disassemble the black plastic box, carefully wipe several reflective surfaces of the multi shuttle mirror with clean lens paper, wipe several optical lenses clean, restore the removed plastic box, and pay attention to the installation of the connector of the junction card. When the machine is turned on again, the printed handwriting will be full.

Fault 2

The laser printer often fails to turn on the heating lamp. Only one power lamp turns on after the machine is turned on, so the machine can not work normally.

Maintenance method: through inspection, it is found that it is not the problem of fuser, power supply or small relay. It’s a problem that a 102J small resistance heated by the tube in a small box beside the power box doesn’t contact the circuit board well. Because it’s two sides of the circuit board, both sides should be welded, and the trouble should be eliminated after the electric ferrochrome is welded. This fault is very common in St laser printer, but sometimes the heating lamp does not work is the one-way SCR fault of power control part. Fusing lamp, thermistor and thermal protector are also common failures. If the measuring fusing lamp tube is burnt out, the thermistor performance is not good, and the thermal protector is open to replace.

Fault 3

Sometimes the heating lamp of the laser printer is on or off.

Maintenance method: when the heating lamp is not on, use a multimeter to check whether the connecting wires of two light tubes are broken or not, and whether there seven thin wires are broken, because the fusing part of the laser printer is connected to the main machine flexibly, and several wires are often disassembled and broken easily. If the heating lamp does not light up frequently, but it can be used normally after a long time of cooling, it is the problem of the thermistor. Replace the thermistor with a new one, and the fault can be solved. Use a multimeter to measure 320K Ω in cold state and 1.45k Ω in the hot state of the normal thermistor.

Fault 4

The output image is light in color, unable to see the handwriting clearly.

The color of the laser printer and the output image is so light that the handwriting can hardly be seen. Try to adjust the contrast knob to the maximum position, and the output sample handwriting is still unclear. Considering the dirty mirror surface, wipe the reflector and focusing lens with alcohol cotton ball, and the fault is still the same. Check whether the transfer electrode wire is normal. If no abnormality is found, clean the electrode wire, and the fault is still not eliminated. Check the charging electrode wire of the powder box. It is intact and normal. Check the high-voltage and high-voltage contacts. It means that the fault is not related to the electrode wire.

Through further inspection, it was found that a spring plate of the sensitive sensor switch of the laser drive circuit was broken, which causes the printer to fail to close when it is working, resulting in the above-mentioned fault. After replacing the spring plate with a new one, the fault is removed.

Fault 5

Photographic fixing heating is not normal

After the laser printer is turned on, the power indicator light is on. The preparation/waiting indicator light is off as soon as it flashes. The fusing heater only flashes once and no longer heats up. Sometimes the fusing heater does not work at all when the printer is turned on.

Based on the fault, suspect the fusing heater is in poor contact or damaged. Take down the fusing heater, use the multimeter resistance to check whether both ends are normal, and check the thermistor, temperature sensor and protection circuit, and no problem is found. Check the control interface circuit of the main control board and no abnormality is found.

Further, check the heating drive circuit and find that there is a problem with the thyristor. After the replacement of the new silicon controlled rectifier, the fusing heater returned to normal operation and the fault is removed.

Hot Toner is committed to providing the best online printer cartridge shopping experience for all your business and home needs.

Here are our highly recommended laser printer cartridge

Canon EP-32 Toner Cartridges

Canon LaserCLASS 3170 Printer Toner Cartridges

HP Color LaserJet 2500N Printer Toner Cartridges

HP Color LaserJet CM2320fxi MFP Printer Toner Cartridges

HP Color LaserJet Enterprise MFP M577z Printer Toner Cartridges

There are four common electrical grounding methods:

1.Working Grounding

Working grounding, also known as system grounding, is grounding a certain point of the network according to the needs of the normal operation of the power system. For example, the neutral point of three-phase system is grounded to stabilize the potential of the grid to the ground, thus reducing the insulation to the ground. It can also make the flashover or breakdown of ground insulation easy to detect, and is conducive to the implementation of relay protection measures.

2. Protective grounding

Protective grounding is also called safe grounding. The metal case of electrical devices, the structure of distribution devices and the tower of transmission lines may be charged due to insulation damage. The grounding is set up to prevent it from endangering the safety of people and equipment.

3. Lightning Protection and Grounding

This is to make the strong lightning current safely into the ground, to reduce the potential rise caused by the outdated lightning current, such as lightning rod, lightning wire and arrester grounding.

4.Antistatic Grounding

Grounding is designed to prevent the dangerous effects of static electricity on flammable and explosive substances such as flammable oil, natural gas storage tanks and pipelines.

Generally speaking, the function of grounding can be divided into two parts: The one protecting personnel and equipment from damage is called protective grounding; The one ensuring the normal operation of equipment is called working grounding. The classification here refers to various requirements considered in the design and construction of grounding engineering, and does not mean that each "ground" needs to be separated. On the contrary, in addition to the special reasons such as anti-interference of geoelectric signals and special requirements of equipment itself, we advocate the joint grounding scheme as far as possible.

Beisuda located in Ningbo, Zhejiang, it is a professional enterprice, who focus on R&D, production, sales copper clad steel series grounding and copper clad rod products.

1. Anti-shock effect of rubber and anti-shock rubber materials
Rubber is characterized by high elasticity and high viscosity. The elasticity of rubber is produced by changes in the conformation of its curly molecules. The interaction of rubber molecules can impede the movement of molecular chains and show the characteristics of viscosity, so that the stress and strain are often in an unbalanced state. The curled long chain molecular structure of rubber and the weak secondary force between the molecules make the rubber material exhibit unique viscoelastic properties, so it has good shock absorption, sound insulation and cushioning properties. Rubber components are widely used to isolate vibration and absorb shock, because they have the characteristics of hysteresis, damping and large reversible deformation.
The hysteresis and internal friction characteristics of rubber are usually represented by loss factor, and the larger the loss factor, the more significant the damping and heat generation of rubber, the more obvious the damping effect. The size of the loss factor of rubber material depends not only on the structure of rubber itself, but also on temperature and frequency.

2. Development and application of anti-shock rubber products
Rubber shockproof products commonly known as rubber shock absorber. There are many kinds of rubber shock absorber, which can be divided into compression type, shear type, torsional type, impact type and mixed type. With the development of science and technology, there are more and more kinds of rubber shock absorbers and more and more applications. In the developing society, rubber shockproof products will receive more and more attention, and its development prospect will be very extensive.
Anti-shock rubber mainly used in:
Construction engineering: Because of the inevitability of the earthquake disaster, in the building, only the addition of anti-shock rubber can mitigate the damage of the disaster, reduce economic losses, and ensure personal safety.
Car: The anti-vibration product is used to control the vibration and noise of the automobile and to improve its control stability.
Railway rolling stock and railway sleeper pads: It can improve the cushioning performance of concrete sleeper rail, reduce the impact of sleeper rail on ballast bed and increase insulation.
Bridge: All the loads on the bridge span structure can be reliably transmitted to the pier, and the deformations of the end horizontal displacement and the rotation angle of the bridge span structure caused by the load can be withstood. The second is to adapt to the expansion and contraction caused by the change of temperature and humidity.

Hoan is one of the leading Anti-shock Rubber manufacturers in China, Welcome for enquiry.

Freehand Capture of Moments

Rider-M is a highly portable and wearable stabilizer specially designed for outdoor enthusiasts and adventure sports photographers/videographers, mountable by almost all standard action cameras with size of 42.3x30mm, including GoPro Hero 1/2/3/3+/4/5, as well as Xiaomi Yi camera. With a standard ¼” threaded hole at the bottom, it is compatible with various add-ons of photographic accessories, allowing freehand capture for even extreme motion scenes.

Real-time Display Monitor

Designed with a 3.5mm video output port on its side, Rider-M allows connection to an external display monitor that the user can easily see and check camera image for real-time angle adjustments thru mobile APP or a dedicated remote control. Get ready now to unlock more creative visual angles by placing Rider-M on any mounting base at any shooting spot you like.

Bluetooth remote control is available within the periphery of 10 meters radius in absence of electromagnetic interference (actual operation condition depends on the site environment).

Control Modes & 1-sec Angle Lock

To the greatest facilitation for outdoor creativities, Rider-M's 3-axis stabilizing system is designed with 3 classic gimbal control modes – Pan following, Locking and Following Mode. Through simple mode switch users can make much easier angle adjustment for instant capture of moments without compromising camera stability. In addition, the unique 1-sec angle lock feature of Rider-M allows manual setting of camera angle by simply turning the camera to a desired position for a second, and the system will auto lock that specific attitude for a quick & accurate snap.

±320 Wide Shooting Angles

Featuring double-stopper design, Rider-M presents a ±320 wide shooting angle flexibility while realizing an ideal stabilizing effect with minimized gopro gimbal inertia, optimized quick response system and smooth rotation using high-precision sine-wave vector motor controllers.

Precise • Stable • Fast

Integrated with an independent IMU (Inertial Measurement Unit) as the gopro gimbal's control center featuring high-speed MCU parallel control technology, enabling fast and precise calculation of and feedback to camera attitude and movement, Rider-M performs with perfect smoothness, agility and silent rotations to make capturing of dramatic shots much easier.

Better Efficiency & Lower Consumption

Well-tuned by Zhiyun's self-innovated Instune Algorithm and empowered by optimized high-torque motor control technology, Zhiyun tech evolution 3 axis handheld gimbal stabilizer for gopro helps users capturing stunning live streams with unparalleled smoothness. Its extraordinary steadiness eliminates subtle shakes even when zoomed in x5 in display.

Zhiyun is a professional manufacturer of gimbal 3. If you want to know more details or quotation, just feel free to contact us!

Supercapacitors have fast charging and discharging speed, stable performance, environmental protection and safety, and are very suitable for automotive electronics applications such as driving recorders.

The driving recorder needs to have backup power during use. The use of super capacitor car recorder, through reasonable circuit design, is safe and environmentally friendly, and does not have the advantage of explosion.

Kamcap has high-quality ultracapacitors for sale. To know ultracapacitor price of different types or if you want to buy super capacitor, please contact us via info@kamcap.com. Our different types of supercapacitors can meet your different requirements.

Injection molding parts are the basic technological equipment of industrial production. Formulas have been obtained. In electronic, automobile, television, electrical appliances, instruments, instruments, household appliances and telecommunications products, 60% and 80% of the parts are molded by injection molding parts. The injection molding parts have high precision, complexity, consistency, high productivity, and low energy consumption, which are incomparable with other manufacturing methods. It is also a "benefit amplifier". The value of the final product produced by injection molding parts is often tens or hundreds of times the value of injection molding parts themselves. Specifically, taking the popularization of integrated manufacturing units and technologies for injection molded parts as an example, in recent years, in addition to the functions of automatic feeding, stamping, lamination measurement, thickness grouping, iron core combination and product output, hinge assembly and connection, injection molded parts have also emerged complex motion structure, in-mold heating, forging, local thermal (tissue) control, in-mold welding, tapping, local injection, In-die cutting, in-die testing and other process combination. For example, the application of 3D printing to produce an injection molding cavity is a new trend in the development of injection molding parts. The technology of metal material addition and material reduction combined manufacturing is an important direction in the field of 3D printing nowadays. High precision manufacturing of complex metal parts is realized by 3D incremental forming and high-speed milling. At present, the top three applications are industrial machinery, aerospace, and automobile, accounting for 20.0%, 16.6% and 13.8% of the market share respectively.

Injection-molded parts China industry developed late. The modern injection parts industry did not start until the end of the 1970s. However, after many years of efforts, injection molded parts China manufacturing industry has established a research and development institution including injection parts technology and injection parts by introducing mature design and manufacturing technology and independent innovation from developed countries and regions. The industrial system of injection molding parts, including the production and supply system, has made considerable progress in scale and technical level of injection molding parts industry.

Since 2012, the number of patent applications related to injection molded parts China has steadily increased. In 2017, the number of patents filed reached 22,872, exceeding 20,000 for the first time, a record high. In 2018, the number of patents filed decreased, but still exceeded 17,146, to 17,146.

Established in the year of 1996, HanKing Mould Enginering Ltd. starts the business in injection mold service china, after years of development, we have become a one-stop total plastic injection molding solution provider which including mold making, injection molding, second process and final assembly.

上智大学大学院地球環境学研究科の岡崎雄太准教授は、日本の公害防止の歴史をよく知っている。彼は昔から環境省、駐中日本大使館に勤務し、中国の環境問題にも詳しいです。先日、彼は新華社記者に日本汚染対策法の経験を詳しく述べました。彼は、民衆とメディアが積極的に参与し、政府は法規と司法の公正を改善し、これらの措置は日本の環境汚染問題の解決過程を共に推進しました。

岡崎氏によると、東京の大気汚染は1964年の日本の東京オリンピックの時も深刻だった。その時代、人々の汚染に対する認識はまだ浸透していなかった。校歌の中には、自分たちの町が「虹のような煙突の排出」を見たと褒める学校もありました。

その後、日本各地で汚染による広範囲な公害病が報告され、その中で廃水の水銀汚染による水俣病、第二水俣病、大気汚染による四日市ぜん息とカドミウム汚染によるイタイイタイ病を合わせて「四大公害病」と呼ばれるようになりました。このような背景から、公害問題に世論や世論が注目され、影響や被害を受けた民衆が訴訟を起こし、政府や企業を圧迫しています。各級の政府は圧力の下で各種の汚染公害を防止する措置を取り、最終的に経済発展と環境保護を両立させる道を出しました。

岡崎氏によると、日本の汚染対策の成功経験は主にいくつかのステップを経た。まず、市民の「反公害」意識の高まりが、政府や企業に影響を与えています。一段階で公害問題を訴える市民が増え、一部の地域では市民が自発的に公害に反対する民間組織を作って政府やマスコミに訴えました。

1970年、首相をはじめ公害対策本部が設置されました。1971年に環境庁が成立し,1973年に「公害健康被害補償法」が制定された。また、公害関連訴訟では司法訴訟が大きな役割を果たしています。日本の「四大公害病」は1970年代に司法手続きに入り、原告(被害者)が勝訴したことで、政府や企業が汚染を減らす対策を打ち出しました。司法手続きは被害者の利益をある程度保護し、企業にも警鐘を鳴らした。汚染企業による被害者への賠償は今日まで続いています。

地方政府の相次ぐ公害規制法や司法判決の影響で、日本の企業も汚染の長年の流れを認識し、設備総投資に占める割合が1965年の3.1%から1975年には18.6%に増加した。政府はまた、企業の環境保護設備への投資を誘導するための政策を策定し、税制優遇、低金利融資及び環境保護技術の研究開発、知的財産権の保護などの面で企業を支援しています。

┃代　 表：榊原康寛

┃所在地：東京都千代田区大手町１-7-2

┃会社名：株式会社ブルーエコノミー

┃設　 立：2005年３月

┃資本金：3,000万円

┃業　 種：環境ソリューション

With the combination of lighting, image and data processing, the automated visual inspection equipment can detect and monitor the production process and product appearance damage, which guarantees the high quality of products.Visual inspection has been wildly use in many fields such as automotive, low voltage electrical, hardware, precision electronics and other fields. With many years of experience and abundant professional knowledge, Yiheda can design a complete visual inspection solution based on your needs.

Visual inspect system is produced in industrial automation. In modern industrial automation production, automated inspection equipment involves a wide range of inspection, measurement and part identification applications, such as auto parts size inspection and automatic assembly integrity inspection, electronic assembly line component automatic positioning, beverage bottle cap printing quality inspection, bar code and character recognition on the product packaging. The common feature of this type of application is continuous mass production and high requirements for appearance quality. Usually this kind of work with high repetitiveness and intelligence can only be done by manual inspection. We often see hundreds or even thousands of inspection workers to perform this process behind the modern assembly line of some factories. While the factory adds huge labor costs and management costs, it still cannot guarantee 100% inspection pass rate, and today's competition between enterprises has not allowed even 0.1% defects. In some cases, such as accurate and rapid measurement of small size, shape matching, color recognition, etc., it is impossible to continuously and stably perform with the human eye, and other physical quantity sensors are also difficult to use. At this time, people began to consider to combine computer's rapidity, reliability, and reproducibility of the results with the highly intelligent and abstract capabilities of human vision, thus there is gradually forming a new discipline - Visual inspection.

Visual inspection is the science and technology that have research on using computers to simulate the macroscopic visual functions of living things. In layman's terms, it is to use machines instead of human eyes to make measurements and judgments. Firstly, the CCD camera is used to convert the ingested target into an image signal, which is transmitted to a dedicated image processing system, and converted into a digitized signal according to pixel distribution, brightness, color and the like; the image system performs various operations on these signals to extract the characteristics of the target, such as: area, length, quantity, position, etc.: Finally, it output results according to preset tolerances and other conditions, such as: size, angle, offset, number, pass/fail, presence/absence, etc. Visual inspection is characterized by automation, objectivity, and non-contact. Visual inspection emphasizes recognition and judgment, as well as reliability in an industrial field environment compared to image processing systems in general.

Visual inspection is a fairly new and rapidly developing field of research. From the 1950s, people began to study the statistical pattern recognition of two-dimensional images. In the 1960s, Roberts began research on 3D Visual inspection. In the middle of 1970s, MIT Artificial Intelligence Lab officially opened the "Visual inspection" course, and the research began to boom globally in the 1980s, Visual inspection has flourished, new concepts, new theories continue to emerge. Today, Visual inspection is still a very active area of research, with related disciplines include: image processing, computer graphics, pattern recognition, artificial intelligence, artificial neural networks, and more.

Yiheda automation, one of custom automation companies, specializes in designing and manufacturing the China automatic production line to customers. We welcome merchants from all over the world to cooperate with our factory for mutual benefit and win-win, and jointly create a better future.

Copper clad steel ground rod wire function: High-voltage ground wire is used for line and transformer construction. It prevents electrostatic induction shock or misclosure of nearby charged body to ensure safety. Due to poor insulation performance or humid environment, there will be a certain static electricity in their cases of household electrical appliances. In order to avoid accidents, a wire can be connected to the metal shell of the electrical appliances, and the other end of the wire can be connected to the earth. Once the electrical appliances leak, the ground wire will bring static electricity into the earth and release it.

Ground wire is the line directly connecting the earth, also known as the safety loop line. When dangerous, it directly transfers the high voltage to the earth, which is a lifeline.

High-voltage ground wire structure: Portable high-voltage grounding wire consists of insulating lever, conductor clamp, short-circuit line, grounding wire, grounding terminal, confluence clamp and grounding clamp.

High-voltage ground wire manufacturing process: excellent production process - wire clamp, grounding clamp is formed by high-quality aluminum alloy die casting; operating rod is made of epoxy resin color tube, which has good insulation performance, high strength, light weight, bright color and smooth appearance.

Ground soft copper wire is made of multiple strands of high-quality soft copper wire and covered with soft, high-temperature transparent insulation layer, which can prevent wear and tear of grounding copper wire in use. It can meet the fatigue test requirements of copper wire and ensure the safety of operators in operation.

1. Reduce external dust

What is the number one enemy of laser printers? Dust! Because the laser printer works by static electricity, it can strongly absorb dust. Any clean office is dusty, and the paper itself has tiny fibers similar to dust. These fibers, dust mixed together, and then after “hot” processing, will become a “universal” adsorption of dirt. In order to fix the toner, the last process of laser printing is heating by heating the roller. The “residual heat” of this process will make the dust accept the “firing” process and become a hard structure. We should pay attention to the ventilation of laser printer, but we can’t put it on the ventilation channel. If we put the printer on the vent, aisle, or next to the door and window, the printer with static electricity will play a role of “magnet” to absorb dust.

2. Hazards of internal dust

The printer is a technology complex. It will spread millions of toner particles precisely on a piece of paper. While doing this work, there will inevitably be a small amount of “litter”. When these small particles are mixed with the small fibers shaken off from the paper, they become the “micro” garbage with strong adsorption. Gently shaking the powder box to make the toner evenly distributed will help to achieve good printing results, but if you use excessive force to do this work, it may cause toner leakage, resulting in adverse consequences. Should pay attention to the use of clean paper, not only to ensure the printing effect, but also for internal cleaning.

3. Learn simple cleaning

Many faults of laser printer need to be repaired, the root cause of which is dust. It is very necessary to clean the printer regularly and effectively, but how do we do these daily cleaning work? The simplest and reliable way is to have professional maintenance engineers clean the printer regularly, but some cleaning work can be done by ourselves through careful operation. Too much dirt in the paper path will make the printed paper dirty. When cleaning the paper path, first open the cover of the printer, take out the selenium drum, and then gently wipe the roller and other relevant parts back and forth with a clean and soft wet cloth to remove paper scraps and dust. Because of the corona net technology, the ozone filter is installed on the laser printer. The ozone filter should be replaced at least once a year. After each replacement of the powder box, the corona net shall be cleaned with an alcohol swab. More often, use soft gauze to clean the carbon particles on the inner wall. Carefully clean all visible and accessible parts of the interior, just like cleaning camera lens. The best way is to use a small vacuum cleaner to absorb the powder particles without blowing the leather ball (do not directly wipe the smooth surface of the drum to avoid scratches). These cleaning work can reduce the black spots or stripes when printing.

4. Special cleaning tools

You can buy some special laser printer cleaning tools. Cleaning paper is a kind of special paper with the shape of ordinary paper. It has a strong adsorption effect. When it is used, it is put into the paper feed slot and have the laser printer print a blank file. The purpose is only to make the cleaning paper move normally. The cleaning paper is like a sponge to stick away the dust on the roller and paper path. Repeat the operation several times to complete the cleaning work on the paper track. For the dust adsorber, due to the influence of static electricity, carbon powder may be adsorbed to other parts of the printer. Replacing the powder box and pulling out the jammed paper will also cause the diffusion of carbon powder. These scattered carbon powder may fall back to the paper path, which is one of the reasons why the printed paper is not clean. The carbon dust adsorber itself is also charged with static electricity, and is made of elastic active adsorption materials, so it is easy to clean up the internal dust.

Hot Toner is committed to providing the best online printer cartridge shopping experience for all your business and home needs.

Here are our highly recommended laser printer cartridge

Canon LBP3360 Printer Toner Cartridges

Canon LBP2410 Printer Toner Cartridges

Canon LBP6650dn Printer Toner Cartridges

HP Color LaserJet 3600 Printer Toner Cartridges

HP Color LaserJet CP2025 Printer Toner Cartridges

The function of the supercapacitor ups is often determined in the first few seconds to a few minutes after the power failure or the instantaneous collapse of the grid voltage. The battery needs to provide power during this period. The shortcomings of the battery itself need regular maintenance and short life, so that the UPS is running. It is necessary to always check the state of the battery. In a data protection backup system, the time required by the UPS is relatively short. The advantages of supercapacitors are particularly pronounced, with output currents rising to hundreds of amps or even thousands of amps with almost no delay, and fast charging, energy storage in a short period of time, and 50,000 cycle life Do not need care for ten years, so that UPS is truly maintenance-free.

Kamcap has high-quality ultracapacitors for sale. To know ultracapacitor price of different types or if you want to buy super capacitor, please contact us via info@kamcap.com. Our different types of supercapacitors can meet your different requirements.

PLUS+ MotionMemory

Intelligent memory delay path

Using the new MotionMemory feature with Crane Plus allows you to setup advanced camera movements and save them so Crane Plus will remember them for the future. It will even remember all of your timelapse settings like the interval, number of shots, duration, and more! Now, with a simple click of a button you can repeat the same moving shots over and over again. It's like having your very own camera assistant everywhere you go!Whether your an aspiring filmmaker, a vlogger on youtube, you're recording family events, or you're a timelapse photographer, with MotionMemory you'll be able to easily capture these wonderful moments exactly how you imagined.

Plus+ POV Mode

Get More Intuitively Creative

Crane Plus adds a newly designed POV (Point of View) mode that allows for additional camera movement by providing up to 45 degrees of synchronous motion on the roll axis, What this means is that rather than Crane Plus keeping the camera level when you roll left or right, POV mode will move with you and roll your camera left or right, up to 45 degrees. Even simpler, when you move, your camera moves with you. The addition of POV mode, along with the 3 other modes on Crane Plus give you the level of control and freedom you need to capture almost any shot possible. The only limitation is your imagination.

PLUS +

A Massive Capable Payload of 2.5kg

Crane Plus is pushing the limits even further than before! Using our cutting-edge, 6th generation Instune Algorithm System to power the motors, Crane Plus can handle a massive weight capacity of up to 2.5kg (5.51lbs). Whether you're using mirrorless cameras with kit lenses or your using professional grade DSLRs with heavier lenses, Crane Plus can now handle a significantly wider range of camera and lens combinations.

PLUS +

NightLapse

In the past, gorgeous timelapse photography is only limited to daytime shooting. Now with Crane Plus arrives the NightLapse feature: A powerful new tool for creating gorgeous, long-exposure timelapses that add in a new dimension of motion and depth. Using Crane Plus with NightLapse, you can capture stunning star trails, moving nighttime traffic, capture the passage of time over beautiful nighttime landscapes, and all with the stunning motion and stability that only Crane Plus can provide.

PLUS +

All-in-one Design

Crane Plus comes with a camera control cable that can realize synchronous operation on both your camera and   gimbal stabilizer like taking a photo or zooming. Combined with a dedicated phone APP - ZY Play, Crane Plus helps to realize various advanced shootings, like motion timelapse and panoramas, just at your fingertips.

PLUS +

Full Set of Accessories

Included with each purchase is a whole lineup of accessories so you can get right to filming the moment you receive your Crane Plus. We include everything you need: Anti-Slip sweatband (for extended use) Camera Cables for Controlling and Charging Your Compatible Camera Aluminum tripod for setting your Crane Plus down and using as an extended grip.

Zhiyun is a professional manufacturer of handheld stabilizer for smartphone. If you want to know more details or quotation, just feel free to contact us!

Push Pull Bottle Tops Features:

Push pull bottle caps, as seen on many water bottles, and here seen in closed configuration. The unique three-dimensional modeling is very unique and adopts safe and non-toxic pp material, which has little damage to the environment and supports recycling and utilization.The inner layer has Screw Cap, which ensures that no leakage of liquid occurs. The outer layer can be lifted off the bottle Cap. Without turning the inner layer, the outer layer can be lifted to fetch water.Closure is the standard for most bottle.The company has passed the ISO9001 quality management system certification and adopted the advanced ERP management system, making the quality and delivery time of our products always at the leading level in the industry.What's more, as one of the most professional push pull caps suppliers in China, we also have a variety of closure options to match with your bottles.

Plastic Water Bottle Caps Push Pull Lid Caps Data:

Taizhou alpha mould technology Co,. LTD is one of the most professional plastic bottle suppliers China. We sincerely invite and welcome people from all around the world to invest and create more values together.

The macroscopic, physical properties of a powder pile are the basic characteristics of powder materials. Knowledge of these properties is therefore a crucial factor in powder production, processing and packaging, as well as in the transport, storage and application of these materials.

Alongside the large number of measuring instruments for powder characterization such as particle size, particle shape or BET surface area, which can only be used to estimate the macroscopic, physical properties of powders, we offer the PowderPro A1 system for fully automatic and precise measurement.

Test Items: angle of repose, angle of fall, angle of difference, angle of spatula, angle of slide, voidage, dispersibility, tapped density, bulk density, hall flow, compressibility, cohesiveness, uniformity, flowability index, floodability index.

As the leading particle size instrument manufacturer in China in terms of brand reputation, sales volume and, most importantly, qualities, Bettersize spare no efforts on R&D each year. Always feel free to inquiry!