Blogs/News/PSAs

High temperature resistant phytase is prepared by liquid deep fermentation and post treatment. Phytase is a special kind of phosphomonophosphate hydrolysis enzyme, which catalyzes the hydrolysis of phytic acid into lower inositol phosphate derivations and inorganic phosphate. Phytase has great potential and value in animal nutrition, resource and environment protection and human health. Shingenzyme as one of leading phytase manufacturers is your best choice.

Product info

Definition of Enzyme Activity

Under the condition of pH 4.8 at 37 ℃, 1 μ mol of inorganic phosphorus is released from sodium phytate solution with concentration of 5.0 mmol/L per minute, that is, an active unit of phytase, expressed as U.

High Temperature Resistant Phytase Appearance

Powder: light yellow powder, good fluidity 40 mesh screening rate≥90%, dry weight loss ≤10%

Liquid: Brown or light yellow liquid, density 1.1-1.2 g / ml

High Temperature Resistant Phytase Specification

Liquid: 30 kg / barrel, 200kg / barrel, 1000kg / barrel

Powder: 25kg / bag

High temperature resistant phytase：20000U/g(mL)

Ordinary phytase：50000u/g（mL）

Special packaging specifications or enzyme activities can be customized according to customers' needs.

High Temperature Resistant Phytase Advantages

The advanced production technology can ensure the high purity, high stability and good uniformity of products. The optimal pH 4. 0 is more suitable to play a role in pig stomach, poultry stomach and crop. h2 resistance: It is tolerant to protease, acid, granulation temperature, more suitable for using in the feed. Heat-resistant phytase has better thermal stability and is suitable for high-temperature granulation.

High Temperature Resistant Phytase Efficacy

It can increase the utilization rate of phosphorus in food and feed. It can reduce the amount of organophosphorus in animal waste and reduce environmental pollution. It can improve the utilization of phosphorus in aquatic animals to plant feed, accelerate the growth of fish and improve the utilization of phosphorus. As an additive to feed chickens, it can accelerate the growth rate of chickens and enhance their tolerance to high temperature.

It can release nutrients combined with phytate phosphorus, such as minerals, amino acids, digestive enzymes and trace elements, to promote animal growth. The substitution of phytase for calcium phosphate can save more formulation space, thus reducing the cost of feed to the greatest extent and improving the economic benefits of breeding.

High Temperature Resistant Phytase Usage

When this product is used, it should be mixed with a small amount of pre-mixed feed first, then amplified step by step, and then added to the feed. Adjust the formula: adding this product can reduce the amount of 5-10kg/t calcium hydrophosphate in the feed formula and reduce the formula cost.

High Temperature Resistant Phytase Note

1. Storage and transportation: This product is a bio-active substance. It can avoid exposure to rain, h2 light, high temperature and humidity during storage and transportation. It should be stored below 25 ℃and the labeled enzyme activity can be maintained for at least 6 months.

2. Note: This product is not combustible and can be safely mixed with water. Avoid contact with the body or inhalation of dry powder. Flush or accidentally contact with skin or eyes should be rinsed immediately.

Forklift work safety requirements

1. There shall be no deformation or weld seam de-welding. The rolling clearance between the inner and outer gantry shall be adjusted reasonably. It shall not be greater than 1.5mm. The rotation of the roller shall be flexible. The roller and shaft shall be free from cracks and defects. The amount of wheel groove wear must not exceed 10% of the original size. 
   
   2. The tension of the two lifting chains should be uniform, no distortion, and the ends should be firmly connected. The pitch of the chain should not exceed 4% of the original length. Otherwise, the chain should be replaced. The sprocket rotation should be flexible. 
   
   3. The forks shall not be severely deformed and the welds shall be desoldered. There must be no cracks or welds on the surface of the fork. The root angle of the fork shall not be greater than 93° and the thickness shall not be less than 90% of the original size. The height difference between the left and right fork tips shall not exceed 3% of the length of the horizontal section of the fork. The positioning of the fork should be reliable. The bearing surface and the positioning surface of the fork should not have obvious defects. The clearance between the fork and the fork should not be too large and the movement should be smooth. 
   
   4. The connection between the lifting cylinder and the door frame should be firm. The hinge of the tilting cylinder and the door frame and the frame should be firm and flexible, and the matching clearance should not be too large. The cylinder should be well sealed, free of cracks and stable. Under the rated load, the self-sinking of the gantry is not more than 20mm and the inclination is not more than 0.5°. The lifting speed should not be less than half of the standard value at full load. 
   
   5. The overhead guard and the shelf must be complete and effective. 
   
   6. It is strictly forbidden to stand up and down the forks. It is not allowed to use a single fork to take goods with high load. 

Electric forklift repair and maintenance

1. Check if the thermostat works normally. 
   Check if the shifting work of the transmission is normal. 
   3. Check the tightness of the fan belt. 
   4. Check if the diesel tank oil inlet filter is clogged and damaged, and clean or replace the filter. 
   5. Check and adjust the valve clearance. 
   6. Check and adjust the gap between the brake pads of the hand and foot brakes and the brake drum. 
   7. Check whether the generator and starter motor are installed firmly, and whether the wiring head is clean and firm, check the carbon brush and commutator for wear. 
   8. Replace the oil in the oil pan and check whether the crankcase ventilation pipe is intact. Clean the oil filter and the diesel filter. 
   9. Check cylinder pressure or vacuum. 
   10.Check if the wheel is installed firmly, whether the tire pressure meets the requirements, and removes the debris embedded in the tread. 
   11. Disassemble the parts due to maintenance work, and carry out the forklift road test after reassembly. Check whether the multiple way reversing valve, lifting cylinder, tilting cylinder, steering cylinder and gear pump work normally.

Wax is divided into emulsion form, flake, and micronized wax. There is pure natural wax, modified natural wax, semi-synthetic wax, synthetic wax and so on. Powder coatings are mainly used for polymer modification and synthetic wax, and are solid, such as polyolefin wax and polytetrafluoroethylene (PTFE wax).

First, the role of micronized wax powders

Frosting effect

When the melting point of the selected wax is lower than the baking temperature, because the wax melts into a liquid during baking, a thin layer similar to frost is formed on the coating surface after film cooling.

Axis effect

The effect is that the wax is exposed to the outside by its own particle size similar to or larger than the thickness of the coating film so that the scratch resistance and scratch resistance of the wax can be shown.

Floating effect

Regardless of the wax particle morphology, wax drifts to the surface of the film during film formation and disperses evenly, which makes the top layer of the film protected by wax and shows the characteristics of wax.

II. Application of micronized wax powder

Degassing

Because there are small molecular substances on the surface of powder coated substrates, especially in porous substrates such as cast iron, cast aluminum, and zinc substrates, this kind of wax solves coating defects such as pores, bubbles, and depressions caused by the above substrates.

Improving leveling

Some amino modified polyethylene waxes have better wettability in resin-coated fillers and pigments because they are of the same type as the leveling agents used in powder coatings. As a result, surface leveling also improves.

Increasing Smoothness of Powder

Basically, each kind of micronized wax powder has the effect of improving the smoothness of powder and increasing the storage stability of paint. Generally speaking, considering the cost, adding 0.2-0.5% (wt) in the formula, the micronized wax powder is more popular. It should be noted that the influence of the manufacturing process and impurities of low-grade wax on powder coatings cannot be ignored. More importantly, in addition to some wax formulations, when baking, odor and smoke are particularly large, which is not conducive to environmental protection and safety. Additionally, the raw material with a small amount of wax is not easy to stick to the cooling roll after extrusion.

Controlling glossiness

There are two kinds of extinction: physical extinction and chemical extinction. The extinction of polyolefin wax belongs to the former. The wax will float to the surface of the film and form fog when baking, thus reducing the gloss. If a micronized wax powder is used alone, the dosage is 1.0-3.5% (wt). In such applications, micronized wax should be used as far as possible because it is easy to disperse. If wax sheets are used and added to 1.5% (wt), there will be a small dent on the surface of the coating. And after re-extrusion, the depression will only increase. Planar products generally add up to 3.5% (wt). If this amount is exceeded, the horizontal fluidity of powder melting decreases obviously. Moreover, the greater the wettability of the powder, the worse the changeability of the powder.

It is chemically resistant.

Due to the floating effect of wax, a compact oil bearing layer is formed on the surface of the coating, so the boiling water resistance is better, and the salt spray resistance is superior.
It is wear-resistant, scratch-proof and scratch-proof.

Wax is distributed on the surface of the film to protect the film, prevent scratches, scratches and provide wear resistance. Generally, propylene modified wax and polytetrafluoroethylene wax are added, especially for dark flat formula and low gloss sand grain formula.

Gaxiao attended PHILCONSTRUCT 2018 in Manila during 8th to 11th at SMX center, which is a professional show regarding construct and ventilation in Philippines.
Demanding of HVLS Fans is growing fast in Philippines that more and more people need HVLS fans instead of traditional ceiling fans. It could help industries there save cost and improve efficiency.

Welcome you to send us inquiries. To help more and more Asian friends with good quality and best service, Gaxiao will do our best. We can offer you best large ceiling fan for church philippines.

Duofold combines the best attributes of clear, box-grade plastic and paperboard to produce a truly distinctive visual package. Combining these two dissimilar substrates allows for some very unique structural designs, while providing two distinctive visual, textural and tactile impressions.

Soft Crease® scored rigid film can be used to create multiple plastic box panels or to make windows that wrap around multiple score lines, permitting far greater visibility than conventional windowed paperboard cartons. What's more, the rigid film adds integrity and strength, allowing much larger windows than is possible using lightweight window film.

And for even greater shelf impact, any combination of offset, flexo and/or silkscreen printing, plus foil stamping and other decorating special effects, can be applied to either the plastic or paperboard panels, or both.

As an plastic packaging manufacturer in China,Hlpklearfoldpvc will keep strive to offer you  transparent plastic box with high quality.

Indoors climate control wiki generally refers to houses, offices, industries, movie theaters, restaurants, shopping malls, cars, ships, and planes. Because different air pollution sources are exhausted indoors or outdoors continuously or from time to time, the pollutants will be accumulated in sealed places under the circumstances of poor atmospheric conditions, doing harm to the health. When people spend the majority of their time indoors, the humidity will be increased, threatening to the furniture and sanitation. It takes 90% time of people to stay indoors, so the quality of indoor climate influences the working quality and efficiency directly, leading to a focus on how indoor air pollutant affects people's health. Improving the indoor climate and processing risk assessment are helpful to promote environmental management and human health. In addition, heating and cooling are needed respectively in winter and summer to keep the preference temperature indoors.

The challenge

Edition Research institutions found that the air quality index of the environment in common household, schools, all kinds of typical offices and buildings indicates the serious problems are CO2 which is on the high side, volatile organic compounds( formaldehyde) and high concentration of biological contamination, which are caused by weak atmospheric conditions. Also, the application of cable to detecting system and the difficulties of construction and laying play roles in it. The problems are briefly described below:

The problems of concentrations of carbon dioxide(CO2)

The causes of FCU system mostly being applied involve excessive densities use of population, improper setting of air conditioners and inadequate air output in offices and insufficient heights of most floors. At the same time, not enough air from outdoors is delivered and too many compartments are in the offices so that the efficiency of replacement is low and the concentration of CO2 indoors is high.

The concentration of HCHO and TVOC

A serious problem commonly appears in offices is the excessive concentration of indoor volatile organic pollutants which will increase due to poor ventilation systems and most building materials having volatile organic solvents, especially the concentrations of HCHO and TVOC generally tested to be over.

The concentration of biological pollutants

Tropical island climate means the annual average relative humidity reaches more than 80%, thus the external environment will easily be hotbed for biological pollutants. It is shown in a testing result taken for a long time, the concentration of general pollutants will be higher than WHO, so it is suggested that 1000CFU/m3 value should be regulated.

Yiheda Automation R & D team can provide you with professional solutions, we have developed many machines for different industries based on manufacturing systems technology, such as automatic assembly, automatic welding, visual inspection, laser marking, robot integration, recording and traceable and other custom machine.

Robot Feeding Application

Full automatic feeding machine, can automatic identify the defective product in key assembly station and discharge it. Improved the production efficiency and decreased the labor cost.

Automatic Assembly

Yiheda has many years of experience in developing automated assembly machine. The Automated assembly machine and assembly systems can help you deliver a new product to the marketplace in a short time.

Automatic Welding

Yiheda automatic welding machines are much faster than skillful human welders can ever hope to be, and produce decent workmanship despite their greater speed. An automatic welder is roughly eight times faster than a manual welder.

Visual Inspection

Visual inspection is simple and less technologically advanced compared to other methods. Compared to other methods, it is far more cost effective and is one of the easiest inspection techniques to perform.

Laser Marking

Yiheda automatic laser marking machines adapt with various lasers and powers and thus always allow the most economical and optimal configuration for the application in question.

Recording and Traceable

The recording and traceable system has been widely used in various industries. It is actually a kind of production control system that can carry out forward, reverse or non-directional tracking of products.

Conveying

Conveyors are machines which carry products from one place to another. There are a large number of different types of conveyor, designed to convey different types of product or to perform particular tasks.

WHY AUTOMATION?

Automation can be defined as the technology by which a process or procedure is performed without human assistance.
In other words, Automation or automatic control, is the use of various control systems for operating equipment such as machinery, processes in factories, boilers and heat treating ovens, switching on telephone networks, steering and stabilization of ships, aircraft and other applications and vehicles with minimal or reduced human intervention. Some processes have been completely automated.

Why is automation so widely used today? 

1. Improving efficiency and control quality
   Most of mechanical automation devices are able to automatically process and control the information, they are more sensitive, accurate and wider than manual in inspection area. The automatic control system makes sure that the execution of mechanism is conform to the design, which will be not affected by operators. Thus the production efficiency and quality can be ensured indirectly. For example, the CNC machine is mare stable and its production efficiency is 2 to 6 times of the ordinary machine; if the machine is equipped with flexible manufacturing system the utilization can make 1.2 to 3.2 times better, the number of machine tools can be reduced by 20%, the manpower can be reduced by 20%, the lead time can be reduced by 40% and the cost can be reduced by 20%. Besides, the mechanical automation devices can be adjusted by programming, so they are especially suitable for the production of multiple variety and small-batch products. In general, they are the good method for manufacturers to shorten the product development cycle and accelerate the upgrade.
   
   Improving the production safety and reliability
   Mechanical automation devices generally can automatically self-monitor, self-alarm, self-diagnosis, self-protect. When devices overload, over-pressure, over-current, short circuit and meet other power failure during running, they will automatically start the protection program which will avoid accidents and improve the safety. Mechanical automation devices is consist of many electronic components, which reduce the movable components and wear parts, then they are more sensitivity and reliable, thus the failure rate is reduced and service life is longer.
   
   3. Easy to adjust and maintain
   The mechanical automation devices is adjustable by programming to meet various requirements and no need to change any components and parts. If the devices can memorize data, engineers can design several kinds of program and input in the devices, then the devices can change the execution base on different products and programs. Automated inspection and automatic monitoring of mechanical automation devices can automatically prevent failures in the working process and self-restore. Since the widespread adoption of program control and digital display in mechanical automation devices, the operation buttons and handle are reduced, so the operation is more convenient and simple. The motion of the mechanical automation devices is controlled by electronic control system, so they can recently complete all motions. The advanced mechanical automation devices can automatically optimize the operation base on the mathematical model of products and the change of the external parameters.
   
   4. With compound function and widely applicable
   Mechanical automation devices are compound and widely applicable, which get rid of the restriction of single function and technology of mechanical and electrical products. The automation level of them is improved greatly. The flexible and intelligent mechanical automation devices can automatically control, compensate, calibrate, adjust and protect themselves, so they can be applied to different occasions and different fields, to meet different requirements.
   
   5. Improving working conditions
   Mechanical automation devices are knowledge-intensive and technology-intensive. High level of automation can reduce labor intensity, prompt the factory automation, office automation, agricultural automation, transportation, automation, and even home automation.
   
   Non-standard automation equipment industry as a whole presents an obvious upward trend, that is, non-standard automation equipment market has broad space, and even some traditional industries may become the most potential market. However, the number of non-standard enterprises in China is relatively large; the scale is small; the technology is backward; competition homogeneity is also obvious shortcomings, and in this field there is a gap of at least 10 years with developed countries. New non-standard automation equipment is often mechanics equipment, making full use of the latest achievements of information technology. Designers in some Chinese enterprises are not familiar with the products, dare not or will not choose them, which greatly limits the improvement of the level. Many core technologies are not really independent, and it is obviously difficult to reduce the cost of importing equipment. At present, high-end products, such as industrial robots and servo motors, are still mainly imported from abroad.
   
   Although the non-standard automation equipment industry as a whole presents an obvious trend, the market space of non-standard automation equipment is vast, and even some traditional industries may become the biggest market potential. However, with the growth of similar enterprises in China, the proportion of non-standard automation products produced in China is steadily increasing.

Heat stable alpha Glucoamylase was extracted from Bacillus licheniform is NO.2709 after fermentation. The strain was identified as safe by FDA. This product has good heat resistance and low PH value adaptability. It can be used in the "liquefaction process" of starch sugar, alcohol, beer, lactic acid, and citric acid industries. It can also be used in the "desizing process" of the textile industry. Buy glucoamylase from Shingenzyme.

Product info

Heat Stable Alpha Glucomaylase components

Glucoamylase stabilizer dispersant

Specifications / physicochemical properties:

Appearance requirements: brown powder preparation, with the smell of microbial fermentation products.

PH value (25 C): stable between 5.5-9.0, preferably between 5.8-7.0.

Enzyme activity: greater than or equal to 40000u/g

Function: temperature range is 80-100 ℃, the most suitable

temperature: 95-105 ℃

Heat Stable Alpha Glucomaylase Health indicators

Heavy metals (Pb)% less than 0.004

The total number of colonies CFU/mL is less than 50000.

Coli group MPN/100mL is less than 3000.

Mold CFU/mL is less than 200.

Salmonella should not be detected.

Definition of Enzyme Activity

A glycosylase unit is the amount of enzyme needed to hydrolyze a soluble starch in an hour to produce 1mg glucose.

Heat Stable Alpha Glucomaylase Packing

Non-toxic plastic drum, 20kg/ barrel, 25kg/ barrel

Heat Stable Alpha Glucomaylase Storage

Store in a cool, ventilated, dry place (suggested below 25 ℃).

Period of Validity

Under the condition of 25 ℃, if saved for 3 months, enzyme activity to save more than 90%; If stored for six months, the enzyme activity exceeds 80%.

Heat Stable Alpha Glucomaylase Usage

Recommended dosage: 0.35-0.6 l/t of starch for sugar and glutamate industry "liquefaction process", others 0.15-0.3 l/t of starch.

Safety Matters

Enzymes are proteins that can cause allergies or allergic reactions in certain people.

Prolonged contact may cause discomfort in the skin, eyes, and nasal mucosa.

Therefore, any overflow, even a small overflow should be cleaned up in time.

Wash the enzyme solution immediately on the skin or eyes with water and seek guidance from a specialist.

Our common forklifts are usually standard small forklifts, which are small in size and have a mass ranging from 1 ton to 5 tons. They are also the most frequently used forklifts in our work. In addition to standard forklift trucks, there are special container forklift trucks for container operation, which are divided into container operation forklift trucks (2-5t), empty container stacking forklift trucks (7-10t) and full container loading and unloading forklift trucks (20-42t).

Tonnage type of forklift truck

1. Forklift trucks, such as general diesel forklift trucks and electric forklift trucks, generally use diesel, gasoline, natural gas and storage batteries as power. The load capacity is about 1.2-8.0 tons, and the width of working passage is generally 3.5-5.0 meters. Because the load is small, it is more flexible and the most common type of forklift. This kind of forklift is usually used to fork lighter pallets and is the main force in the factory workshop.

2. The heavy duty forklift has a larger load capacity, usually powered by diesel engines with a load capacity of 10.0-52.0 tons. They are generally used for outdoor operations in heavy cargo wharfs, steel and other industries.

3. Container forklift trucks are still powered by diesel engines, with carrying capacity ranging from 8.0 to 45.0 tons. They are generally divided into empty container stacker, heavy Container Stacker and container front crane. Mainly used in container handling, such as container yard or port terminal operations.

4. The heavy duty forklifts are named because they can fork goods from the side. They also use diesel engines as power, and their carrying capacity is about 3.0 to 6.0 tons. In the case of no turning, it has the ability to fork goods directly from the side, so it is mainly used to fork goods of long strips such as wooden bars and steel bars.

When selecting forklift trucks, different tonnages of forklift trucks should be selected according to different uses. If the tonnage is too small, it is easy to lose its balance and cause accidents. If the tonnage is too large, it will lead to a small horse-drawn cart and waste of resources.

High melting point - this wax is perfect for cylindrical, hand dipped, molded, molded or sculpted gift candles. This kind of paraffin wax is very hard and cannot retain its fragrance. This kind of paraffin wax melting point is 145 degrees Fahrenheit or 63 degrees Celsius. This wax is used to make the various waxes mentioned above so that the candle does not sink on its own as it cools. If you make a candle from this wax, you need additives. Medium melting point - this wax is used to make prayer candles and sometimes container candles. This type of paraffin wax melting point is 127-145 degrees Fahrenheit or 53-63 degrees Celsius. This wax feels harder than low-melting wax, but it holds its shape better. This kind of wax is good at keeping the fragrance, but additives are needed. This type of wax is lumpy and needs to be cut into small pieces to melt. Low melting point - this type of wax melts at 127 degrees Fahrenheit or 53 degrees Celsius. Soft wax is an ideal material for making candle containers and has the properties of lasting fragrance until the candle burns out. Softer paraffins have many advantages, but they are more difficult to process and emit more soot than other waxes. Once you decide on the type of candle you want to make, you can choose the most suitable paraffin wax. No matter where you buy the paraffin wax, you must know the paraffin wax melting point. In this way, the gift candles will look good. You also need detailed instructions on how to use the wax when you buy it.

When choose industrial fans, the user maybe confused, and do not know which kind is better. While a good industrial fan is not only meeting performance requirements,but also involving safety and noise.

Five safety standards for large industrial fans as follow:
1. Check whether the motor head and the whole machine will shake when rotating in low and medium speed gears, especially in high speed gears.
2.After a long period of high speed rotation (at least 1 hour later),perceive the heat generating from the front shell of the industrial fan by hand or other instruments. If it feels very hot, it indicates that the industrial fan motor has poor heat dissipation performance.
3, look at the speed, power, air volume, noise and other parameters (industrial fan speed, power, air volume and noise is proportional, that is to say, the higher of fan speed, the power and air volume are greater,  the noise will also become larger,part ventilation cooling effect is better).
4, see whether there is intermittent pause in high speed rotation around the head, whether the head is not in place.
5.Gaxiao industrial fan is designed with brand-new mortise and tenon structure connection mode, which has the function of real anti-collision.

#hvls fan #high volume low speed fan #industrial ceiling fan #ceiling industrial fan

Then, we need to observe the noise of industrial fans. What are the sources of noise?

1.Vibration. If the rotor of the fan rotates, the rotor's physical center of mass and the center of inertia of the rotating shaft are not on the same axis, it will lead to the imbalance of the rotor.The close distance between the physical center of mass of the rotor and the center of inertia of the rotor is called eccentricity, and the imbalance of the rotor will result in eccentricity. When the rotor rotates, a force acting on the support of the rotor will be generated due to the action of centrifugal force, resulting in vibration, and vibration will be transmitted from the base path to all parts of the machinery.
2.Wind noise. At the rotating of large industrial fans, the blades are periodically subject to the pulsating action, resulting in noise;On the other hand, the blade itself and the pressure on the blade are not evenly distributed, so it is easy to disturb the surrounding gas and parts during the rotation, which also constitutes the rotation noise.In addition, vortex noise is generated by the pulsation of pressure distribution on the blade , which is due to gas flowing through the blade generating the turbulent attachment layer, vortex and vortex separation.The noise of these 3 reasons can be called  "cut wind noise", the fan with general wind & big wind pressure, its cut wind noise is bigger also.
3. Abnormal sound, wind noise sounds like just the wind, but the abnormal sound is different, during the rotating of industrial fan, if except to the wind, there are still other sounds, you can judge the industrial fan has abnormal sound.Abnormal sound may occur due to foreign matter or deformation in the bearing, collision for improper assembly, or uneven winding of the motor resulting in looseness.The service life of fan is working time of radiator product working normally without breakdown , high grade industrial fan use life can achieve tens of thousands hours commonly.
The size of noise when the fan works, affected by many factors, the unit is decibel (dB).When measuring the large fan’s noise, it shall be carried out in the muffler room with noise less than 17dB, one meter away from the fan, and aligned with the fan's air inlet along the direction of the fan shaft, and measured in A weighted way.
4.The spectral characteristics of industrial fan noise are also very important. Therefore, it is necessary to record the noise frequency distribution with a spectrograph. Generally, the noise of the fan should be as small as possible and there should be no abnormal sound.Fan noise is related to friction and air flow.Fan rotate speed is higher, wind quantity is bigger, the noise that causes also can be bigger, the element of fan’s vibration also cannot ignore additionally.Of course, a high-quality fan will have very little vibration of its own, but the first two are difficult to overcome.To solve this problem, try using a larger fan.In the case of the same air volume, the working noise of the large fan at a lower speed should be less than that of the small fan at a higher speed.

Gaxiao is a one of the professional industrial ceiling fan manufacturers in China with our own R&D team, we are always ready to help you increase air circulation and reduce energy cost.   

HLP Packaging manufactures stand-alone thermoformed packaging, like blisters and clamshell packaging, as well as vacuum-formed trays to be used as inserts in clear plastic boxes and Klearfold Keepers. Clear vac-trays within clear boxes position the package contents securely, create exciting aesthetics and the illusion of contents floating within the clear box.

As an plastic packaging manufacturer in China,Hlpklearfoldpvc will keep strive to offer you  clamshell blisters and plastic blister packaging with high quality.

About Wine Storage

Wine storage optionsThere are three main ways to store your bottles of wine safely and securely:Wine cellar – this is the ideal way to store your wine bottles, temperature and humidity controlled ide...

About Wine Glasses

Many friends are asking, what do you need to pay attention to when drinking wine? In order to make your wine better, we can get these routines...First, the choice of wine glasses is very important.Th...

The Role of Wine Refrigeration Units

The low temperature treatment of wine can improve and improve the quality of wine on the one hand. The shorter the new wine, the more effective the effect of cooling to improve the sensory quality. On...

The Necessity of Wine Refrigeration Units

The wine contains a certain amount of pigment, which is easily affected by ultraviolet rays to cause pigmentation and discoloration of the liquor. Red wine contains protein and salt, which precipitate...

The Working Principle of the Wine Room Cooling Systems

It is always a happy moment to enjoy a bottle of quality wine. The only regret is that it is difficult to keep the wine at the right temperature. The newly designed fashion product, the wine cooler, s...

Wine Room Cooling Systems Process

The quality of the wine is closely related to the equipment of the wine room cooling systems. Freezing and cooling to achieve a certain degree of clarity in the wine to prevent crystallization of tart...

Advantages of Wine Cellar Temperature and Humidity Control Units

According to the requirements of the wine cellar, the unit will also be equipped with a condensate drain pump and anti-vibration device. The special equipment of the wine cellar has the advantages ove...

Introduction of Wine Cellar Temperature and Humidity Control Units

Wine cellar temperature and humidity control unit or wine cellar constant temperature and humidity machine, is namely called low temperature precision constant temperature and humidity air conditioner...

Thenow will strive to offer you wine cellar wiki with good quality.

.

What does silicone mean? Silicon is a very rich element on the earth, and silicone is the product after the organic silicon is organized. Silicone, also known as silicone or siloxane, is a siloxane organic polymer that is cross-linked by silicon oxide. It has excellent properties not found in general organic polymers such as cold, heat, oxidation and electrical insulation. Since the industrialization in the 1940s, it has developed vigorously, and its application range has gradually deepened from military industry and national defense to various fields of daily life, such as conductive buttons for computers, mobile phones and various electrical keyboards, contact lenses, swimming goggles and swimming caps, children's nipples, glass curtain wall adhesives for high-rise buildings, medical artificial organs, leather, high-grade fabric finishing agents, and silicone oil softeners in advanced shampoos are all inseparable from silicone. It can be said that organosilicon compounds have their place in people's clothing, food, housing, transportation, medical care, beauty, and many aspects of the sea. It has become an indispensable part of people's daily life. As a leader in new chemical materials, its development is in the ascendant. In view of the application prospects of organic silicon, at the end of the last century, many developed countries have made silicone materials one of the new materials for the development of the new century. Silicone itself is not only a new type of material, but also provides a new material foundation and technical guarantee for the development of related industrial fields. In view of the ever-changing nature of silicone materials, it has the characteristics of "not directly used but widely used", so it has obtained " Industrial MSG, "the catalyst for technological development". In addition to a small number of upstream monomer companies, the silicone industry is a large number of small and medium-sized private enterprises engaged in the production of products and additives. It is believed that with the continuous expansion of China's main board market, there will be a full-fledged silicone enterprise. In the future, the market will show its talents. The understanding is to transform quartz sand into the industrial chain of solar cell wafers. Its main purpose is to produce solar panels. Silicone materials are a wide range of chemical products. The term "silicone product" in the commercial field generally refers to organic compounds containing silicon, polymers and their subsequent processed products. The silicone polymer has a semi-organic semi-inorganic polymer skeleton and an organic side chain, and such a special polymer structure gives it a series of excellent properties. The material form of silicone materials is various, most of the silicone polymers are resistant to high temperature and low temperature; water and moisture are resistant to weathering; high insulation. Silicone products can be divided into three categories: silicone monomers, silicone polymers, and silane coupling agents. According to the different production and application of products, silicone products can be roughly divided into two categories: upstream products and downstream products. The upstream products are mainly various types of silicone monomers and intermediates, of which the most abundant monomer is methylchlorosilane monomer, followed by phenylchlorosilane monomer. Downstream products are commonly referred to as silicone polymers and silicone synthesis processing aids. The basic structural unit (ie, the main chain) of the silicone product is composed of silicon-oxygen chain links, and the side chains are connected to various other organic groups through silicon atoms. Therefore, in the structure of the silicone product, both the "organic group" and the "inorganic structure" is contained. This special composition and molecular structure make it combine the characteristics of organic matter with the function of inorganic substances and have high resistance. Low temperature, weathering resistance, electrical insulation, ozone resistance, water repellency, flame retardancy, non-toxic, non-corrosive and physiological inertness. Some varieties also have oil, solvent and radiation resistance. Compared with other polymer materials, the most outstanding properties of silicone products are excellent temperature resistance, dielectric properties, weather resistance, physiological inertness and low surface tension.

The three-position switch automatic assembly line is used to complete the automatic loading and assembly of the fulcrum, and other parts of the three-position switch, and to detect whether the assembly process is missing or not, and to unload the OK and NG products.

Machine feature of Three-Position Switch Assembly Machine

The installation of the product is great and no damage.
The HMI can adjust and record the data of assembly process.

Machine parameter of Three-Position Switch Automatic Assembly Line

Error rate of NG products<0.05%
Machine life:10 years
Noisy＜75dB

Through synergistic reaction of various enzymes system on fibers:paper enzymes

makes the fibers separate effectively and open the fiber code, soften availably the fibroblast and increase the permeability of fibers, and have the fibers suck the water fully, leveling up the beating effect and lowering down its consumption. Enzymes used in pulp and paper industry reduces the cohesion of fibers so as to the fibers become more flexible, which favors them to fibration, pushing the fibers to get more chances for spit longitudinally and lessening the cutting off crosswise, further protecting the fibers.Enzymes in paper industry

breaks the primary wall of fibers, which benefits the outer sphere of the secondary wall to peel off so that the fibers can be completely separated and broomed, strengthening the bonding among them. Enzymes used in paper industry lowers the power consumption/gas consumption, raises the operational efficiency of paper machine and improve the quality of paper.

Semi-electric stacker trucks are widely used in ground cargo, pallet movement, stacking and short distance transportation. In many places, such as factories, warehouses, logistics centers, it is safe and efficient to use all-electric stacking trucks to stack and transport pallets. Especially in some narrow corridors, elevators, assembly lines and other workplaces, it can fully reflect its excellent flexibility, tranquility and environmental protection performance. It is suitable for heavy-duty and long-term cargo transshipment. It can greatly improve the efficiency of cargo handling and reduce labor intensity. Electric stacker truck is super thin streamlined, and with small turning radius, strong body, light and flexible movement. It also has the advantages of no noise, no pollution, long working time for one charge, reliable performance. Semi-electric stacking truck is also called electric loading and unloading truck, electric lifting truck and electric stacking truck.

Characteristics of semi-electric stacker truck:

1. Compact structure, small occupation, light self-sufficiency, convenient maintenance, flexible operation, economic and practical. Suitable for heap height and

handling operations.

2. Power lifting, the speed of lifting can be controlled.

3. Electric stacker truck adopts imported hydraulic power unit, which is integrated and low noise.

4. The door strength of this electric forklift truck is made of high-strength imported materials.

Refractory products fall into two categories: brick or fired shapes, and specialties or monolithic refractories. Refractory linings are made from these brick and shapes, or from specialties such as plastics, castables, gunning mixes or ramming mixes, or from a combination of both.

Oreworld Trade (Tangshan) Co. is a professional refractory supplier in Tangshan City, China's. Our major products are basic refractory bricks, insulating bricks,  refractory mortars, high alumina brick, ceramic fiber blanket, ceramic fiber board, alumina ceramics, furnace bricks, furnace refractory, refractory bricks and other industrial ceramics.

Our products are used in the cement, steel, power generation and foundry industries.

Our products enjoy good reputation both in China and abroad. Our main foreign markets include USA, Germany, UK, Italy, Turkey, Russia, Japan, South Korea and etc.

There exist various refractory brick suppliers in China,as one of these refractory suppliers, we have excellent csa china for saleplease feel free to contact us.

In the process of PVC sheet production, paraffin has a very long non-polar carbon chain with a very strong polar center. In the structure, the part compatible with plastic in polarity plays the role of internal lubrication, and the part incompatible with plastic in polarity plays the role of external lubrication and demoulding.Compared with fatty acid lubricants, paraffin has no favorable effect on melt tension and vicat softening point, and provides excellent adhesion resistance and flow control.

Wax emulsion production of KING HONOR INTERNATIONAL LTD. is to control melt, even large amount can have very good compatibility with other components. It has thousands of customers in the PVC industry, as a famous paraffin wax emulsion manufacturer. Paraffin is a known plastic lubricant that provides both internal and external lubrication (mold release effect) while maintaining a high degree of transparency and having little effect on gelation.

At the same time, the low volatility of paraffin is important for calendering and vacuum degassing in the process of die-casting PVC sheet. As a kind of internal lubricant, paraffin has good compatibility with polymer, which can reduce the intermolecular cohesion of polymer, so as to optimize the internal friction heat generation and melt fluidity of plastic melt.

The main function of the external lubricant is to optimize the friction between the polymer melt and the hot metal surface of the processing equipment. It has poor compatibility with polymers and has easy migration from inside the melt, so a thin layer of lubricant can be formed at the interface between the plastic melt and the metal.

Besides the application of paraffin emulsion in PVC board, it is also applied in pipe material, wire and cable, etc.

KING HONOR INTERNATIONAL LTD. was founded in 2008, with ten years of production experience. It is a famous domestic paraffin wax emulsion manufacturer, providing quality paraffin emulsion supply services for customers.  Welcome customers to come to inquire.

Only visual packaging from HLP Klearfold lets customers see your primary packaging and beauty products in all their splendor. The finest box-grade plastics and the clean lines of Soft Crease® scoring reveal what's inside, while creating their own allure through flawless printing and special effects. Be sure to build Klearfold® cartons into your brand-building programs.

As one of the plastic box manufacturers in China,Hlpklearfoldpvc will keep strive to offer you  makeup brush packaging and cosmetic box design with high quality.