Blogs/News/PSAs

Product description

We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these tees have a diameter that is same to the diameter of the main pipe, as a result, the name equal tee. We furnish ss butt weld equal tees that are set up except a great deal problem and require less upkeep as well. Being corrosion resistant and give a rapid disconnection in case of emergency. We export giant quantities of equal tee pipe fitting to industries.

Equal Tee Forming Type:

Extrution Moulding, Hot Pressing, Cold –Machining, Hot –Machining, Welded, Heat Treatment.

Equal Tee Dimensions:

Seamless Fittings 1/2"-32", Welded Fittings 1/2"-120"

Equal Tee Standard:

GB 12459, GB/T 13401, SH3408, SH3409, ASME/ANSI B16.9, JIS B 2311/2220, DIN2617/2616/2615 , GOST 17376

Equal Tee Wall Thickness:

SCH5S-SCH160

Equal Tee Material

Stainless Steel:

OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2,

ASTM A403-WP304, WP304L, WP304/304L, WP304H, WP316, WP316L, WP316/316L, WP321, WP321H, WP347, WP347H

Super Stainless Steel:

ASTM 904L, B366-N08904, A403-WP317, 317L, 254SMO(UNS S31254)

Duplex & Super Duplex Steel:

ASTM A815-S31803, S32205, S32750, S32760, 2205

Low Temp. Steel:

ASTM A420-WPL6, WPL3

Alloy Steel:

12CrMo, 15Cr5Mo, Cr5Mo, 12Cr1MoV, 16Mn, ASTM A234-WP11, WP22, WP91,

WP5, WP9

Pipeline Steel:

L245, L290, L360, L415, L450, L485, ASTM A860 (MSS SP-75)- WPHY42,

WPHY52, WPHY60, WPHY65, WPHY70

Carbon Steel:

ASTM A234-WPB, WPC

Nickel Alloy Steel:

B361 WP6061, B366 N08904, N010276, N04400, N06600, N08825, N10276

B625 N08904, B574 N04400 , N06600, N010276, B649 N08904

B625 N08904, B574 N04400 , N06600, N010276, B649 N08904

Equal Tee Tests and Inspections

X Radiography Test

Mechanical Test

Chemical Composition Analysis

Permeation Test

Ultrasonic Test

Metallographic Structure Test

Intergranular Corrosion Test

Hardness Test

Flattening Test

PMI

Impact Test

Equal Tee Documentation Offered

Raw Material Test Report

EN10204 3.1 Test Certificate

Heat Treatment Chart

Heat Treatment Report

Quality Assurance Plan

Inspection and Test Procedure Report

Welding Procedure Specification

Procedure Qualification Record

Equal Tee Application

Stainless steel tee uses in oil and gas pipeline

Buttweld pipe tee uses in chemical industry

Duplex steel equal tee uses in plumbing

Alloy steel equal tee uses in heating

Butt weld equal tee fitting uses in water supply systems

Steel butt weld equal tee uses in power plant

Straight tee uses in paper industry

Hastelloy steel equal tee uses in general purpose applications

Monel 400 equal tee uses in fabrication industry

Monel 800 equal uses in petroleum

Alloy 20 tee  uses in papermaking

buttweld 45 degree short radius elbow uses in shipbuilding

254Mo tee  uses in petrochemical

904L equal tee uses in natural gas industry

C-276 equal tee uses in ocean engineering

Ss equal tee uses in nuclear industry

Stee tee pipe fitting uses in food and beverage

Butt weld tee fitting uses in electrical powerplant

Asme b16.28 equal tee uses in pharmacy

We are stock , distribution, manufacturer, suppliers, stockholder, traders, wholesaler, importer and exporter for equal tee in stainless steel, duplex steel, Nickel alloy.

A buttweld fitting is a weldable pipe fitting that can change flow direction,branch off, reduce size or connect auxiliary equipment. Butt weld fittings include elbow, tee,reducer,cap and cross.These weldable pipe fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule.The raw materials of weldable steel pipe fittings   are seamless pipe, welded pipe, forged pipe(high pressure) and steel plate.The forming processes of butt weld fittings is as follow:Extrusion moulding,hot pressing,cold machining,hot machining,welded,heat treatment. Huashang Steel is one of the best buttweld fittings suppliers from China.

Stainless steel tube weld fittings  Manufacture Specification：

ASME / ANSI B16.9, JIS B 2311/2220, DIN2605 / 2616/2615, EN10253, MSS SP-43 / SP-75, GOST 17375/17376/17378/17379

Butt Weld Fittings Type：

-(SMLS or Welded) Elbow，45°，90°，LR，SR

-(SMLS or Welded) Tee

-(SMLS or Welded) Reducer

-(SMLS or Welded) Stub Ends

-(CAP

-Special Type acc. to customer's drawings.

Butt Weld Fittings Materials：

Stainless Steel: OCr18Ni9, 0Cr18Ni9Ti, 1Cr18Ni9Ti, 0Cr18Ni12Mo2Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ASTM A403-WP304, WP304L, WP304/304L, WP304H, WP316, WP316L, WP316/316L, WP321, WP321H, WP347, WP347H

Super Stainless Steel: ASTM 904L, B366-N08904, A403-WP317, 317L, 254SMO(UNS S31254)

Duplex & Super Duplex Steel: ASTM A815-S31803, S32205, S32750, S32760, 2205

Low Temp. Steel: ASTM A420-WPL6, WPL3,

Alloy Steel: 12CrMo, 15Cr5Mo, Cr5Mo, 12Cr1MoV, 16Mn, ASTM A234-WP11, WP22, WP91, WP5, WP9

Pipeline Steel: L245, L290, L360, L415, L450, L485, ASTM A860 (MSS SP-75)- WPHY42, WPHY52, WPHY60, WPHY65, WPHY70

Carbon Steel: ASTM A234-WPB, WPC

Nickel Alloy Steel: B361 WP6061, B366 N08904, N010276, N04400, N06600, N08825, N10276

B625 N08904, B574 N04400 , N06600, N010276, B649 N08904

OD：

Seamless products DN15 ( 1/2'' )-- DN800 ( 32'' )

Welded products DN450 ( 18'' ) --DN3000 ( 120'' )

WT：

SCH 5S --- SCH 160

The big irregular workpieces blasting and painting job has been widely completed by blast rooms and painting rooms, cause of this of kind parts have all kinds of shape, it is very hard to arrangement the blasting turbines to automatically blast cleaning room the big workpieces at all angles. it will be a big waste of electricity and blasting media.

Different shape of workpieces have different blasting angles, the automatically wheel blasting machines has not yet reached to the automatic level that blast cleaning different shape workpieces at a different angle.

Another difficult work is the transportation of different workpieces at a different weight, it will be a big cost waste of transportation system if we designed the whole system according to the biggest workpiece.

Take all these uncertain factors into consideration, the blast rooms and paint rooms are the best choices for the end-user.

The blast booth and paint booth can be arranged in parallel or serial, it depends on the customer' shop actual conditions to design, or according to the customer' workpiece moving direction and sequence.

Sandblasting room components

Blasting body

Sandblasting system

Abrasive reclaim system

Dust collector system

Workpiece conveying system

Electric control system

Lighting system

Types of abrasive media reclaim floors

QINGGONG Blast abrasive media reclaim floors are a critical component of the abrasive blasting process. Our company is one of the most professional blast booth manufacturers in China. A highly efficient abrasive media recycling system will save your operation time and labor expenses. This adds to your business’s bottom line. An effective blast media reclaim system reduces costs by allowing for recycling of your abrasive media materials. Re-use of abrasive media reduces material purchase expenses as well as cutting of material disposal costs. As an added benefit, abrasive media reclaim systems allow for automation of blast media recovery, saving additional man-hours. An abrasive media reclaim system from QINGGONG will provide your business with maximum ROI from your abrasive blast system. QINGGONG offers a variety of reclaim floor designs and room configurations. We design blast room facilities uniquely tailored to meet the economic and production concerns of our customers.

Partial Reclaim System

1.sweep-chute floor The sweep-chute floor delivers the economic and environmental benefits of media recycling at a modest cost.

Single Screw or Scraper Partial Reclaim System

2.The most economical floor design available. The system contains screw conveyor or crapper conveyor, heavy-duty screw belt and bucket elevator,air-wash separator, perforated plate rotary drum separator and oversized abrasive storage hopper with a caged man ladder and handrail. This can be expanded to an "H","U", or full floor reclaim system and is best suited for low to medium production levels.

3.“H”-Shaped Partial Reclaim System

Adds two longitudinal conveyors along each sidewall of the blast room allowing the abrasive delivered from the blasting nozzle, which is either blown or rebounded off the workpiece, to strike the side walls and fall into the conveyors, automatically reclaiming approximately 60-90 percent of the blast media. The reclaiming abrasive on the floor is pushed into the screw or scraper conveyors assemblies at the end of the work shift. The “H” shaped floor design is typically used in a “flow-through” room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production.

4.“U”-Shape Partial Reclaim System

Adds two longitudinal screw or scraper conveyors assemblies along each wall of the blast room and positions the cross screw or scraper conveyors along the back wall of the blast room. This allows the abrasive delivered from blasting nozzle, which is either blown or rebounded off the workpiece, to strike the sidewalls and back wall of the blast room and fall into the reclaim system, A "U"-shaped floor design will automatically reclaim 60-90 percent of the blast media. The remaining abrasive on the floor is pushed into the metered shed plate screw assemblies at the end of the work shift, The "U"-shaped floor design is typically used in an "in-out" room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production

Full Floor Reclaim System

A major benefit of this type of system is that it only requires a shallow concrete foundation. This can create substantial savings for the customer in comparison to other types of recovery systems. It also avoids the issue created by digging foundations in an area that have high water table levels. The full-floor reclaim design requires that the material handling of the workpiece be intricately designed into the configuration of the room. Material handling of the workpiece includes a work car/track system, an overhead monorail crane, an overhead bridge crane or guide rail work cars, heavy-duty floor grating and support steel sized to allow a forklift to drive onto the reclaimed floor. This design can be used with any room configuration and is best.

As one of the most professional shot blasting companies, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

Rotary table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating the surface (micro handling), roughing the surface before colouring, etc.

Rotary table shot blasting machines are split into single rotary table shot blasting machine and swing table shot blasting machine. swing table shot blasting machine efficiency is much higher than the single rotary table shot blasting machine.

Rotary shot blast machine Basic Specification

Swing Tables Shot Blasting Machines Basic Specification

Treated objects are loaded on a perforated rotating table. A big door, provide simple and fast loading. The machine can have the table fitted to the machine's door, which enables loading with a hoist or fork-lift truck to the entire surface of the table. The machine also can be equipped with two tables, enabling simultaneous shot blasting of treated objects inside the machine and loading or turning treated objects in front of the machine.

The machine’s housing is robust and protected by wear-resistant materials. High efficiency of the machine is enabled by the system for continued returning and cleaning of the abrasive, along with efficient turbines made from wear-resistant materials. Standard equipment of larger machines includes PLC Siemens, display, timer automatic or manual mode, automatic start-up of turbines, working-hours counter, etc. For shot blasting cast containing larger quantities of casting sand, a magnetic sand cleaner may be installed.

As one of the most professional shot blasting machine suppliers, QINGGONG MACHINERY’s activity is sales of shot blasting machine China and shot blasting supplies. If you want to know more details or want a quotation, just feel free to contact us!

SUZHOU SEAPEAK CO., LTD.. is one of the most professional steel wire reinforced pvc hose suppliers in China, and we focus on producing high quality wire reinforced tubing.

Steel Wire Reinforced PVC Pipe

Used for drawing and conveying water,oil and powder in factory and agriculture.

Suitable for high strength working environment like suction and discharge for sand.

Good adaptability to hard weather condition and minus pressure,small bending radius,anti-abrasion.

Passed the ROHS,PAHS test.

Anti-uv.

Anti Static PVC Steel Wire Reinforced Hose

Anti static PVC steel wire reinforced hose is made of hi-elasticity hi-strength zinc plated metal wire and high-quality PVC compound.

The hose is clear and transparent with good flexibility and small bending radius. The features of our PVC steel wire reinforced hose are high-negative pressure resistant, high corrosion resistant, non-toxic and long life. The hose with copper wire can avoid blockage of the internal flow because of the static electricity. Our PVC hose is wildly used in mine, chemical plant and etc.

Oil PVC Steel Wire Reinforced Hose

working temperature:-5°c~65°c

PVC steel wire reinforced hose is widely used for drawing and conveying water, oil and powder in the factories, agriculture ,engineering, foodstuffs and sanitation lines. Our hose is non-toxic, without odor and transparent and light, with small bending radius.It has good adaptability to hard weather conditions and minus pressure.

Ordinary PVC Steel Wire Reinforced Hose

Characteristics:
This hose,with steel wire screwing inlaid in the hose,is light,transparent,with small bending radius.
It has good adaptability to hard weather conditions and vacuum pressure.
With colorful symbol lines on the surface of the hose,it can be beautiful.

Application:
The hose is widely used for suction and discharge of water,oil and powder in the factories,agriculture,engineering,foodstuffs and sanitation lines,the hose used for foodstuffs is made of special material.It is non-toxic,light,without odor and transparent.
The hose can be used for conveying milk,beverage,distilled liquor,beer,jam and other foods.We can also insert the copper wire into hose.This hose can avoid the block of the flowing in the hose due to static,and protect users from getting electric shock or electric current impingement.
Temperature range: -10℃ to +70℃

Heat Resistant PVC Steel Wire Hose

High-Temperature resistant PVC steel wire hose is made of good zinc plated metal wire and qualified special PVC compound

It can be used under 100 ℃ condition, suitable for different high temperature environment. The PVC steel wire hose is widely used for suction and discharge of water,oil and powder in the factories, agriculture,engineering,foodstuffs and sanitation lines.

Food Class PVC Steel Wire Hose

Construction of food class PVC steel wire hose : 
Tube and cover are crystal clear PVC FDA grade. 
Reinforcement is electro-galvanized spring steel wire.
Temperature: -14℉(-26℃) to +140℉(+60℃)

Application: 
food and beverage dispensing, air,water,coolant, car wash,deionized water systems and other clear flow applications.

Features:
clear food grade PVC allows for visual flow inspection.
Spring steel wire prevents kinking and collapsing.
All sizes are full vacuum.

PVC Steel & Fiber Composite Hose

Use high-strength fibers and high-quality galvanized spring steel wire as reinforcement.

The pressure resistance was enhanced 2-4 times than the single spiral wire reinforced hose.
Inserted the copper wire into the hose can avoid blockage of the internal flow because of the static electricity.

Our company is one of the most professional industrial hose manufacturers in China. And we are devoted to produce high quality hose and fittings.