Blogs/News/PSAs

The new heat exchangers developed for easy plugging conditions such as sticky particles and fibers, super-wide flow passage to ensure the flow of larger granular fluid flow capacity, no contact to ensure that the material will not stagnate in the plate support block. It is very suitable for the recovery of urban water and heat pump waste heat.

Benefits

Flow path design for the perfect material distribution, no dead zone plate.

Ultra-wide flow through large diameter particles.

Non-contact guarantee.

The largest single-sided channel 5-20mm.

Specifications

Maximum processing capacity: 1500m³/h

Maximum design pressure: 16bar

Maximum temperature: 150℃

Plate material: 304, 316, 316L

Advantage

Accessen are a genuine original plate free flow heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producting 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

FAQ

Inquiry request？

Please contact Accessen export office. For the most accurate quotation, please prepare the following data:

Duty, Type of media, Pressure drop, Flow rate, Working pressure, Thermodynamic properties, Temperature, Working temperature.

Which certificates are available for the heat exchangers?

ASME, ISO, AHRI, BV, DNV etc... Case by case certificate was allowed.

SMD color consistency is good. The dispensing process adopts centrifugal technology to enhance the uniformity of the light spot and good heat dissipation.

Product Advantages of Rgb Smd Led Chip

All colors included customized wavelength.

Red light: 620-630NM (R620), Green light: 520-530NM(G520), Blue light: 455-465NM(B455), Yellow light: 1950±75K (2G), Amber light: 595-605NM(H595), Orange light600-610NM(O600), Pink light：2050±75K(F20)

Small volume, big light-emitting area, high luminance; good consistency, without color differences; silicone package, strong anti-UV, high temperature resistance, applied to reflow soldering, working in harsh environments.

Products pass strict destructive test of this industry.

Red ink test

Vulcanization test

High-temperature burn-in test

Cold and hot shock test

Double 85 test

Comply with the standards of the US Energy Star and ERP.

Obtain test and certifications like LM-80 and photobiological certification.

Application：

downlight, light bulb, panel light, stage lighting, building/outdoor lighting, landscape light, instrument display, strip light, signal light, advertisement letter, advertisement lightbox, etc

Specification of RGB 3030 SMD LED:

Product Features of RGB 3030 SMD LED

3.4mm*3.0mm *0.7mm SMT LED Thickness.

View Angle: 120°

Rgb Led Package：4000PCS/Packet

Dice:Blue(InGaN）

Operating Temperature:-40～+80℃

Soldering Temperature：260for10sec℃

Super High Power Consumption

Various Colors And Types Available.

Resin(Mold): Silicone

Reverse Voltage:5V

Storage Temperature:-40～+100℃

Pulsed Forward Current 200mA (Duty 1/10, Pulse Width 0.1mS.

Product description of Used Putzmeister Concrete Pump 738:

1. Putzmeister 36 meter concrete pump, UD chassis (belongs to Nissan, 3 axle x-leg, 4 booms, high working stability.
2. The manufacture Date is August of the year 2007.
3. Working condition and regular work. Equipment evaluation and maintenance.
4. Remanufacturing will be carried out to ensure that every product is in good condition and that there must be no faults to the product when leaving the factory so as to reduce the working pressure and cost of customers.

A used Putzmeister concrete boom pump is a machine which uses the pressure to transfer the concrete continuously along the pipeline. It is composed of pump body and conveying pipe. According to the structure form, it is divided into piston type, squeeze type and hydraulic diaphragm type. The pump body is mounted on the chassis. Equipped with retractable or folded placing booms, the pump truck is constituted.

The used Putzmeister pumps are modified on the chassis of the truck. It is installed on the chassis with power transmission device, pumping and mixing device, placing the device and other auxiliary devices. The power of the engine is transferred to the hydraulic pump unit or rear axle through the power box, and the hydraulic pump pushes the piston to drive the concrete pump. Then, the concrete can be transported to a certain height and distance by placing booms and pipe.

Stationary Lift Table AL1 AL2 AL3

Designed for industrial heavy duty applications(as part of a production process,for machine feeding or stacking etc.). Double acting hydraulic cylinders. Lifting limit switch. Aluminum table frame protects workers from injury by cutting off power.

Stationary Lift Table DG01 DG03

This series of products are mainly used in the production line in industrial and mining enterprise industry. They can also be used as lifts to convey goods in other industries. The products can be made according to the parameters by customers.

Stationary Lift Table DG02 DG04

This tire lift stationary platform is suit for street lamp repairing, aerial work, aerial work, suspension equipments in the workshop, square, gas station, electricity equipment maintaining, and steel structure building.

To meet the needs of different customers, LOYAL has two kinds of cross-cutting machine can choose: HQ-600-1300 high-speed cross cutting machine and HQ-450 high-speed cross cutting machine.

HQ-600-1300 high-speed ruian cross cut machinery is slitting and cross-cutting equipment, suitable for the demand of material's slitting is not too high. If the material cutting requirements are high, you can choose a professional slitting machine slitting processing first and then select the crosscutting machine to do horizontal cutting. For the general requirements of the material, HQ-600-1300 high-speed cross cutting machine can make slitting and cross-step to complete, eliminating many steps. Save labor and reduce material waste. The material of this crosscutting machine is a separate material that can accommodate larger diameter rolls. Unwinding of the correction device to achieve automatic inspection and automatic correction. The waste edges produced during the Slitting process can be blown out through the blower to extend machine life.

HQ-450 high-speed cross-cutting machine is a relatively compact model, unwinding and the whole machine is one. Simple structure, suitable for only cross-cutting material processing use. This machine is controlled by the computer, easy to operate. Frequency variable speed fixed length, can be flexible to meet customer needs. Automatic counting to achieve the function of intelligent counting, saving manpower and resources. Sound and light alarm equipment can remind the operator outside the attention of security, the machine's safety factor is high. The application of the indexer improves the accuracy of the crosscutting.

Cross cutting machine with automatic lifting structure, easy loading, rolling tension by the magnetic brake control. The machine is compact, high degree of automation, with computer control, frequency control fixed length, automatic counting, sound Light alarm, horizontal, vertical and two-bit photoelectric tracking and other functions. It is suitable for lateral cutting of roll material after printing and it is a necessary equipment for the cutting of the composite material. Beside the standard type of machines, we provide customized design in this serial to accomplish the variety industries.

We slitting machine video manufacturers always regard the after-sale service as one of the most important parts in a trade, which probably establishes customers relationships. So you are not always worried about any issues you may face after your purchasement.

Ultraton's 40T Container Terminal Semi Trailer is an ideal and practical way to handle containers by Low-speed tractors in specific areas such as terminals or container diversion centers efficiently. Storage van trailers for sale can be modified according to customer's requirement.

Overview of 40T Terminal Port Container Truck Semi Trailer

Advantage of 40T Terminal Port Container Truck Semi Trailer

Application of 40T Terminal Port Container Truck Semi Trailer

The Next Big Thing

Today's buzz is tomorrow's buzzkill. Consumer demand in the digital age couldn't be more fickle or short-lived. One sure way to excite prospects is to be transparent in your packaging. With clear cartons from HLP Klearfold, your consumer electronics will be on display in all their glory. Because we use the finest box grade plastics, your brand graphics and special effects really jump. It's a good bet customers will, too.
Visualize your product in our clear carton.

Fischer Tropsch Wax

KH FT WAX 80

Features: Narrow Molecular weight Distribution, Fine crystal structure, Linear molecular structure, Low Viscosity, White color, Low penetration Applications: Hot melt adhesives, Paints and Coatings, PVC and rubber processing, Toners & Inks, Fertilizer release controller

KH FT Wax 105

Features: High melting point, High stability, Low Viscosity, Low oil content, Good hardness Applications: In PVC processing as the lubricants, Hot melt adhesives, Master batches, Rubber industries, Pigment and coating, Polishes

KH FT Wax 120

Features: High melting point, Low penetration, Low viscosity

Applications: Printing Ink and coating, Applied in Hot melt adhesives short setting time, Bitumen modification, PVC and rubber processing

Our waxes have been exported to Japan, Europe, North America, Brazil, New Zealand, and 20 other countries and regions throughout the world.

CAS No: 115-77-5

Melting point: 257 °C

Boiling point: 276 °C 30 mm Hg (lit.)

Density: 1.396

Pentaerythritol (PE) or glycerol, together with o-Phthalic anhydride and fatty acid esterification polycondensation can react to produce an alkyd resin coating. Different and varying amounts of fatty acids can improve the properties of alkyd resins differently and make them suitable for a variety of applications. It is widely used as a coating for metal and wood surfaces and commonly used as industrial paints and architectural paints for bridges, railways, derricks, and house construction. Due to the low price of the alkyd resin, easy availability of raw materials, easy modification, strong adaptability, and good comprehensiveness, it has gained rapid development since it entered the industrial production in 1927 and has become the backbone of the coating industry.

PE, commonly used in the paint industry, is a raw material for alkyd paints. It utilizes its four hydroxyl groups to produce highly cross-linked coatings, which have excellent hardness and color and improves the hardness, gloss, and durability of the paint film. It is also used as a raw material for the production of rosin esters for varnishes, paints, and inks. It can also be used as a flame retardant, dry oil, and aviation lubricant. Pentaerythritol fatty acid esters are polyvinyl chloride plasticizers and stabilizers and also used in the manufacture of pharmaceuticals, pesticides, and lubricating oils.

Pentaerythritol acrylate produced from PE and acrylic acid has fast drying properties and is widely used in radiation-curing coatings and fast-drying printing inks to make water-soluble alkyds. Its polymers can be used as adhesives. The C6-C10 fatty acid esters of PE are mainly used as high-grade lubricants for steam turbines, automobile engines, and the like. The C10 - C12 fatty acid esters with small volatility and the anti-aging property synthesized with PE can be used as a plasticizer of plastics; The reaction product  between PE with epoxy compounds can be used as a surfactant and the raw material for detergents, cosmetics, and spices; The product of PE is also used as  raw materials for explosives, pharmaceuticals, pesticides and the like; It can be used as organic intermediates.

Pentaerythritol for sale on hnprosperchem.com. Pentaerythritol buy today!

Introduction of Automatic Foam Cutting Machine

Foam automatic cutting machine is mainly used for cutting various materials. The product adopts advanced computer control system, and can cut complex 3D models. It improves your work efficiency and has an ideal incision at the same time.

It can be used for cutting sponge, foam, pearl cotton, insulation board and other materials. It is controlled by European-style line computer automation. It is suitable for model making, prop making and lost foam making.

Working principle

The foam automatic cutting machine is processed by a computer controlled actuator (stepping motor) to drive the heating wire to cut in the direction of X and Y, thereby processing the three-dimensional model. This will enable the foam material to be cut quickly and accurately. Precision control allows us to cut almost any shape from materials of the same thickness as the required product. By designing and cutting multiple facets of a product, more complex three-dimensional products can also be formed. The automatic manipulator foam cutting machine adopts stepper motor, with stable movement and free speed regulation. It can meet the requirement of cutting special graphics and changing speed continuously. The display screen has the functions of displaying cutting patterns, tracking cutting and so on, and the cutting speed can be adjusted.

Compared with the traditional manual cutting system, the foam automatic cutting machine has the following advantages:

1. With precision and repetitive production, it does not depend on the operator's proficiency.
2. The loss caused by operator's fatigue or mistake is completely eradicated.
3. Low labor intensity and high production efficiency.
4. There is no need to build and repair and store models, which greatly reduces the cost.
5. It is computer automatic control cutting, reducing waste.
6. Design modification, template making, trajectory generation, cutting workpiece can be completed by a single equipment.
7. Due to the switching regulated power supply, the cutting voltage is completely separated from 220V, eliminating the power outage of employees.

YIHEDA AUTOMATION - China Automatic Production Line Manufacturer Contact

Mobile & Wechat: +86-18676932381

Email: ae@yiheda.com

ADD: Fengxiang Road, Dogfang lndustrial Park, Beizha, Humen Town, Dongguan, Guangdong Province, China.

Overview of 315W CMH Grow Light Fixture

Specially designed for CMH 315W lamp

Runs on 120V/240V

High efficiency electronic ballast

High output and improved spectrum

Warranty: 3 years

UL & ETL Certified

The Details of 315W CMH Grow Light

Imported German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with ceramic metal halide 315W lamp that offers full spectrum light, much closer to natural sunlight than the lights delivered by normal HID lamps.

315W cosmo Lampholder

Matched power cord included

The Advantages of 315W Grow Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

The Specification of 315W CMH Grow Light

The Application of 315W CMH Grow Light Kit

Commercial Greenhouse for oganic hydroponic vegetables and fruits     Grow Tent for hobby

Market

The Production Process of 315W CMH Grow Light Fixture

The Drawing of 315W CMH Grow Light Fixture

Other Notes of 315W CMH Grow Light Fixture

Today, Shenzhen Yutai Photoelectric Communications Co., Ltd. came to tell you three common laying methods of outdoor optical cables

1. Selection conditions of direct burial laying method.
The direct burial laying method is suitable for the areas where excavation is not frequent between buildings.

Direct burial laying can also be used in frequently renovated areas or road edges under sidewalks.

In areas with more underground pipeline networks, there may be places where molten metals and high-temperature liquids overflow, so direct burial is not suitable.

It is not suitable to use direct burial method in the soil corroded by chemical or stray current.

2. Direct burial laying must meet the following requirements in concrete construction.
Avoid areas with severe acid, alkali or chemical corrosion. If no protective measures are taken, avoid termite hazards, heat sources and areas vulnerable to external force damage.

Fiber optic cable should be laid in trenches, soft soil or sand layer with thickness not less than 100 mm along the upper, lower and adjacent sides of the full length of the cable.

Along the full length of the optical cable, the protective panels with a width not less than 50 mm on each side of the cable should be covered, and the protective panels should be made of concrete.

Located in urban roads and other places where excavation is frequent, and visible signs can be laid on the upper protective board.

Located in the suburbs or open areas, the lines along the cable path with a straight interval of about 100 meters, turning or joint parts, we should set up a clear azimuth sign and marking pile.

When directly buried in the non-frozen soil area, the foundation from the outer skin of optical cable to the underground structure shall not be less than 0.3m; the depth from the outer skin of optical cable to the ground shall not be less than 0.7m; when located in the roadway or under the cultivated land, it shall be deepened appropriately, which is not less than 1m.

When directly buried radiation is in the frozen soil area, it is better to bury it below the frozen soil layer; when it cannot be buried deeply, it can be buried in the dry frozen soil layer or backfill soil with good drainage property of soil, and other measures can be taken to prevent the damage of optical cable.

When directly buried optical cables intersect railways, highways and streets, they should be put through protective pipes, and the protective scope is more than 0.5m on both sides of roadbed, street pavement and drainage ditch.

When directly buried optical cables are introduced into structures, protective pipes should be installed at the holes through the walls, and water-blocking and blockage should be implemented at the orifices of the pipes.

The net distance between direct buried fiber cables and adjacent optical cables shall not be less than 0.25m; the joint positions of parallel optical cables shall be staggered and not less than 0.5m net distance; the joint placement at the slope terrain shall be horizontal; for the cable joints of important circuits, it is advisable to lay them in the local section starting at about 1000mm on both sides by reserved dosage method. We can set up optical cable according to reserved dosage method.

The soil quality of the backfill should be non-corrosive to the outer sheath of the fiber optic cable when special soil replacement is adopted for the backfill of the direct buried fiber cables.

Direct buried fiber cables are strictly prohibited directly under or under underground pipelines.

We provide a vast range of Chinese used textile machines for sale including used rapier loom and used air jet loom. The used weaving machine offered by us are examined and tested carefully to ensure its best performance when delivered to customer’s plant. We emphasize on choosing the right supplier as we believe quality is the key factor to our success.

4 Rifa Air Jet Looms 280cm Year 2012

Super Pin Connector is widely used in military, aerospace, Medical and RF applications etc.

It adopts advanced no Welding compression-style interconnect technology.  It often used in Semiconductor test sockets and PCB(board to board) interconnects where low-distortion
transmission lines are a necessity. 

Supper Pin offers superior value to other contact technologies such as Pogo Pins, Spring Probes, Hyberboloid contacts or even soldering. This becomes especially evident when requirements such as low signal distortion, high frequency, low insertion force, planarity, shock/vibration resistance, weight and/or extended life come into play.

Soy oil is rich in linoleic acid. Linoleic acid has limited effect on reducing the risk of heart disease. As linoleic acid is not heat-resistant, it is easy to oxidize and polymerize after frying or repeated heat, which is very harmful to health.

Press method is divided into two: general press method and screw press method. The common press method is now rarely used, especially in industrial mass production. The screw press method is relatively complex. The cylinder of the horizontal device is installed with a spiral shaft. After the pre-treated soybean enters in soya bean oil extraction machine, the oil is squeezed out as it advances. Continuous production can be realized in this way. But in the process of oil extraction, because of friction and heat, the protein is mostly changed to a greater extent.

Soybean oil from soybean oil press is commonly known as soybean salad oil and is one of the most commonly used cooking oils. Soybean oil is pressed from soybeans, including cold-pressed soybean oil from the cold press and hot pressed soybean oil from the hot one. The color of cold-pressed soybean oil is shallow, raw bean taste is weak. Due to the high-temperature treatment of the raw material, the oil yield is high, but the color is dark and has a strong smell of raw beans. Like rapeseed, soybean oil press can increase oil yield by slightly improving the press method.

Characteristics of soybean oil from soybean oil extraction machine:

1. High degree of unsaturation;
2. Liquid state at room temperature;
3. It can be selectively hydrogenated and used for blending with semisolid lipids or liquid oils.

The soybean oil cake extracted by the soybean oil machine can be used to make tofu. It can also be boiled to make soy milk.

Soybean press for sale! RFQ today!

JIUWU company produces the ceramic ultrafiltration membranes with the pore size 20nm, 50nm and so on. JIUWU company offers a large choice of ceramic uf membranes with different geometries and cut-offs to meet your process requirements in viscosity, molecule size, impurity profile, purity and yield target, etc. as well as cleaning and sanitization procedures. Ceramic ultrafiltration membranes are better than those membranes in ceramic membrane filtration systems. Our UF membrane water filter won't let you down!

OVER VIEW OF ULTRAFILTRATION CERAMIC MEMBRANE ELEMENT

Ultrafiltration ceramic membrane/ceramic filter is a variety of membrane filtration in which forces, such as pressure or concentration gradients, cause separation through the semi-permeable membrane. High molecular weight suspended solids and solutes remain in the so-called retentate while water and low molecular weight solutes pass through the membrane in the permeate (filtrate). The pore size of the ultrafiltration ceramic membrane is in the range of 0.01μm ~ 0.05μm, suitable for the separation, concentration, and purification of macromolecules and small molecules.

A versatile and economical solution for clarification, concentration, and purification of liquids, ultrafiltration membrane filter could remove emulsified oils, metal hydroxides, colloids, bacteria and viruses, emulsions, dispersed material, suspended solids, and other large molecular weight materials from water and other solutions. Ultrafiltration ceramic membrane also serves in critical parts of the production processes of fruit juice, milk and whey, electrocoat paints, pharmaceuticals, poly-vinyl alcohol, and indigo dye. It is key to surface water treatment for potable uses and wastewater treatment for reuse, such as palm oil wastewater and paper mill wastewater treatment. Ultrafiltration ceramic membrane is used to recycle flow or add value to later products and more. In many cases, ultrafiltration ceramic membrane is used for prefiltration in reverse-osmosis plants to protect the reverse-osmosis process. Ultrafiltration ceramic membrane is an effective means of reducing the silt density index of water and removing particulates that can foul reverse osmosis membranes.

APPLICATION OF ULTRAFILTRATION CERAMIC MEMBRANE ELEMENT

Food & beverage

Bio-pharm

Chemical and petro-chemical

Water & wastewater treatment

ADVANTAGE OF ULTRAFILTRATION CERAMIC MEMBRANE ELEMENT

High flux

Reliability

Well-proven long operating life

Ease of use, clean, regenerate

Stable over a wide pH (0-14) range and chemical compatibility

Sterilization by steam and oxidizing agents

Wear ability and excellent strength

Narrow pore size distribution

Stringent quality control process and procedures with full trace ability

Excellent performance in MF/UF & thermal stability

To know more information about uf membrane filter price and microfiltration membrane price, please feel free to contact us!

SEPLITE ® Chelating Resin

SEPLITE® chelating resin is ion exchange chelating resins for metals removal, recovery and enrichment.

Chelating resins are a class of chelating ion exchange resin with reactive functional groups that chelate to metal ions. They have the same bead form and polymer matrix as usual ion exchange resin, and the variation in chelating resins arises from the nature of chelating agents linked into a polymer backbone.

SEPLITE ® Chelating resins contain a wide range of special functional groups that gives them superior selectivity for specific target metals, Such as SEPLITE®LSC710, which is the iminodiacetic acid bonded in a styrene-divinylbenzene matrix. Other functional groups bound to chelating resins are aminophosphonic acid, thiourea, 2-picolylamine and so on.

Chelating resins of ion learning exchange are almost always used to bind cations, which are found in a big range of metals removal, recovery and enrichment in a dilute solution. Chelating ion exchange resin for brine decalcification in the chlor-alkali industry, the removal of boron(B) from potable water, the recovery of precious metals like: gold(Au), platinum (Pt) ,palladium(Pd),  the removal of heavy metal like: copper(Cu), nickel(Ni), zinc(Zn), manganese(Mn), mercury(Hg) and so on.

Typical Applications Of Chelating Resin

Brine decalcification in the chlor-alkali industry

Removal of boron(B) from potable water

Removal of Ca, Mg.

Recovery of precious metals,Pt, Au, Pd.

Removal of heavy metal, Hg, Pb.

Extraction of Ni.

Approvals

Kosher Certificate

Halal Certificate

REACH

Category List

Inverter Data logger Introduction

Inverter data logger is mainly used in distributed PV power station. It records inverters' operation status and the generated power to make a long-term monitoring of the PV system. As a high cost performance product, inverter data logger for solar system only needs to be invested a little but greatly promotes the rate of return on investment of the system.

We provide solar inverter data logger for solar with low-cost and high-performance. By collecting the information from solar inverters including performance, status and alarm, the data loggers make the 7x24 monitoring of PV systems feasible and efficient. It features with different wireless connectivity, including optional Wi-Fi/GPRS network, which is very flexible to be applied in various scenarios. Working with our cloud service, you will have a complete system that provides you with all important information, parameters and conditions about your solar inverters and PV plant. Android/IOS apps are also available on google play or apple store. Download it and monitor your solar inverter and PV plant on hand. It can collect all the accurately real-time data, including status, performance and alarms from solar inverter by standard communication interface (RS485/422/232) and report to remote cloud every 5 minutes.

The pv logger have standard communication interface (RS485/TTL) for very easy integration to your solar inverter. They can be embedded inside your solar inverter or made as an USB-plug device. We provide fully customization service, including hardware, web system and mobile app design, manufacture and development, to enable you to have 100% your own system and product.

Specifications of the gothia cup medals:

Material: Copper

Design: 3D,Hollow

Plating: Antique Copper Plating

Coloring: No Coloring

Size: 45*45mm

Donghong is a professional maker of all kinds of sports medals since 1984. Our Strengths:

Excellent quality, competitive price, timely shipment, professional customer service, professional one stop solution service. Welcome to contact us for cheap custom sports medals!