Blogs/News/PSAs

Composition and working principle of micro nano bubble machine:

Micro nano bubble machine is composed of water pump, micro nano, generator, pressure gauge, aerator and some pipe fittings. It is a set of equipment specially developed for river treatment and dissolved oxygen repair. The core and technology of this series is mainly to use nanotechnology to compress a large amount of air into a large number of 0.25 mm diameter non pressure microbubbles. Then, the 0.25 mm diameter non pressure microbubbles are dispersed through the gas and liquid phase in a semi vacuum by using the release system, resulting in microbubbles and nanoscale bubbles with a diameter less than 3 μ, which are collectively referred to as the effect of microbubbles releasing to the water body for rapid oxygenation. The micro nano bubbles will not increase and rise. It has special physical and chemical properties such as long survival time, long time in water for 72 hours, large specific surface area, high interface activity, charge with energy and so on. It has a large contact area with water and a high dissolved oxygen rate. The system diffuses a large number of micro  nano bubbles to every corner of the water through the release system at the set depth of water, and the utilization of oxygen is up to 50% - 80%. This equipment uses pure physical method to produce bubble water without adding any chemical substances. The power consumption and the power consumption of the best aeration device in China can be reduced to 1/5, which is much higher than the traditional equipment, and the energy-saving effect is obvious.

With the consumption of dissolved oxygen in the bubble, active oxygen is added to the water and the content of water is increased rapidly. At the same time, all kinds of organic particles in the water are rapidly decomposed to smaller particles, which is beneficial to further biological decomposition and greatly reduces sludge sedimentation. At the same time, micro nano bubbles can greatly improve the supply of oxygen, enhance the biological activity of oxygen microorganisms, plankton and aquatic animals in the water, accelerate the degradation process of pollutants in the bottom mud of the water, and achieve the purpose of water purification.

About Edon-China Micro Bubble Generator Manufacture

Hello and welcome to Edon pump. We are a manufacturer of micro bubble generator which also called gas liquid mixing pump or DAF pump. Since its interception, our company has been researching, developing and adapting our micro bubble generator pump to make it suitable for different specialty and new application or compatible to different countries' electricity system. From our factory in Shanghai, we can offer you different models of micro bubble generator for your various applications and standby spare parts.

After the machining of mechanical parts as motor casings and gear boxes the parts are cleaned and oil residues accumulate. The cleansing agents transported in a closed circuit carry the oil residues and are cleaned subsequently in a flotation process.

Edon has the advanced micro nano bubble technology. RFQ today!

Hydrogen molecule is the smallest molecule in nature. It is extremely penetrating and extremely volatile. It can freely enter and exit the body cells, remove aging and toxic free radicals. After drinking, it enters human body tissues and diffuses to act on all organ line particles and nucleus. Absorbed by the body. Realize the balance of the environment in the body and initiate the mechanism of self-healing.

The hydrogen molecule has strong activity and is easy to volatilize. When it enters the human body, it can release hydrogen and is fully absorbed and utilized by the human body.

Anti-Aging:

Hydrogen can quickly remove malignant oxygen free radicals, activate cells, inhibit oxygen free radicals, achieve ecchymoses, skin, and anti-aging.

hypertension:

Prevents the combination of unsaturated acid fatty acids and reactive oxygen species to form lipid peroxide unsaturated fatty acids, which improves hypertension.

diabetes:

It can restore the normal function of the islets and their recipients and improve the symptoms of diabetes.

Osteoarticular disease:

It can neutralize harmful acidic substances in the body and lower blood uric acid value to relieve gout and other bone and joint diseases.

Liver protection:

Hydrogen can remove the malignant free radicals produced by ethanol during metabolism, promote metabolism and protect the liver.

Sub-health:

Hydrogen can penetrate deep into the tissue or cell membrane space, activate cell tissue, improve the state of stress, and is a younger body.

Malignant tumor:

It can prevent the infinite division of cancer cells and change them into healthy cells with the same life span as ordinary cells.

Metabolic system:

Promote digestive and excretory functions, soften intestinal blood vessels, activate intestinal mucosal cells, and strengthen intestinal peristalsis to prevent and improve constipation.

Cardiovascular:

Hydrogen molecule is the smallest molecule in nature. It can easily cross the blood-brain barrier and directly act on the nucleus and mitochondria to activate blood vessels, thus significantly inhibiting cardiovascular and cerebrovascular diseases.

Edon has been working hard since its inception to provide our customers with satisfactory service and qualified products. We are committed to providing long-term cooperation with our customers and providing you with confidence, satisfaction, and the best professional and technical services.

As one of the most professional micro bubble generator manufacturers in China, Edon has been working hard since its inception to provide our customers with satisfactory service and qualified micro nano bubble generator. We are committed to providing long-term cooperation with our customers and providing you with confidence, satisfaction, and the best professional and technical services. Just contact us!

Space bio-3D printing from Human Cartilage to Thyroid Gland in Rodents and to Space Artificial Meat: SUNKYE Satisfies the Connection and Signal System of Bio-3D Printing in Micro-gravity Environment

Space bio-3D printing may be a concept we've heard recently. But as with 3D printing technology, there was only a short accumulation before it happened! Do we need Space bio-3D printing? Can't we perform such a complex task on Earth? Of course, the answer is yes. But research on pace bio-3D printing shows that it may be more effective in a micro-gravity environment. Meanwhile, decades of exploration of other planets will require bio-printing onboard ships to cure astronauts' diseases.

The International Space Station will be the best place to conduct such exercises. In 2018, Russian astronaut Oleg Kononenko became the first person to make Space biometric 3D printing on behalf of his country. Using a 3D printer created for the space environment, Kononenko can produce human cartilage tissue and rodent thyroid glands. The bio-3D printing engineering experiment with the cooperation of the United States, Russia and Israel began in September 2019.  On October 7, 2019, Aleph Farms, Israel's biotechnology startup, announced that it had conducted a joint experiment on the International Space Station on September 26 to successfully cultivate the first piece of artificial meat in space using a three-dimensional bio-printer. The experiment was conducted by Aleph Farms in collaboration with the Russian Biotechnology Laboratory 3D Bio-Printing Solutions and two American companies. The experiment content is to deliver bovine cells to the International Space Station and then grow them into small muscle tissues similar to traditional meat in a microgravity environment using a 3D bio-printer.

With 3D printing becoming the mainstream, bio-printing has become the core focus in the medical field, showing the potential of unlimited innovation opportunities. The environment is the key to the development of fragile cells. Even in the best research laboratories, fragile cells are usually not easy to maintain. By pressing the material in the syringe for biological printing, the cells can grow in different forms. In October 2017, the mission aboard Soyuz MS-10 failed, but the printer was eventually delivered to the International Space Station.

Researchers are curious about how microgravity can facilitate bioprinting and the growth of cells and tissues. At the same time, the recent use of this technology in space to examine other medical problems has also interested them, such as radiation and human problems. At present, the focus of the research is on how the structures are combined and how they behave. So the connection system and signal transmission are required to have a precise system and a lighter volume.

Sunkye Space Micro Connector & Nano Connector Series Environment Performance

Scientists around the world have created organizations to carry out further medical research, which continues to make progress in bioprinting. The ultimate goal includes the manufacture of human organs in the laboratory. Such innovations could have a huge impact on patients with severe illnesses, such as those waiting for organ donations. Besides, 3D printing organs offer the possibility of patient-specific nursing, which may mean that people do not have to worry about infection, rejection and severe complications.

Space 3D printing technology will play an indispensable role in future space station operation, deep space exploration and other tasks. As far as we know, it takes at least half a year for the space station to wait for the replenishment of the Earth, while 3-D printing takes only 1-2 days to produce parts that need to be replaced. Therefore, it is helpful for astronauts to manufacture necessary experimental tools, maintenance tools and spare parts under a weightlessness environment. It greatly improves the flexibility of space station experiment and the timeliness of maintenance, reduces the types and quantity of space station spare parts and operating costs, and reduces the dependence of space station on ground replenishment. And China's first space on-orbit 3D printer has already been developed successfully.Chongqing Institute of Green and Intelligent Technology of the Chinese Academy of Sciences announced that after two years of efforts, the first domestic 3D printer developed by the Institute and the Center of Space Application Engineering Technology of the Chinese Academy of Sciences has successfully completed parabolic weightlessness flight test in Bordeaux, France, and can complete 3D printing in microgravity environment.

Company Info:

Sunkye International Co., Ltd

Flat/RM, 1402B 14/F The Belgian Bank Building, Nos. 721-725 Nathan Road Mongkok HK.

Tel: +852-69486797

Fax: +852-31828508

Email: sales@sunkye.com

Website: www.sunkye.com

As a specialist in advanced military connectors china, Sunkye has extensive experience in micro-miniature and nano miniature solutions based on the highly reliable Twist Pin contact technology. If you want to know more details or want a quotation , just feel free to contact us!