🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling
Blogs (1194)
Similar to mini Peripheral Component Interconnect Express (mPCIe) connectors, M.2 connectors support various signal interfaces and storage protocols, optimizing the use of the PCIe bus. M.2 connectors are available for PCIe 3.0, PCIe 4.0, PCIe 5.0, Serial ATA (SATA 3.0), and SuperSpeed USB.
M.2 connectors provide the bandwidth necessary for AI/ML accelerators and solid state drives (SSDs). They are identified by their dimensions and keying. For instance, a 2260 M.2 module is 22 mm wide and 60 mm long. Additionally, M.2 modules feature recesses on the plug connector strip to prevent incorrect insertions. Common key formats include B, M, A, and E, along with combinations like B+M and A+E.
Benefits of M.2 for AI/ML
Supports High Density Solutions: The smallest M.2 devices are 18% smaller than the smallest mPCIe devices, enabling more compact designs.
Flexibility: M.2 ports are versatile and can accommodate multiple sizes of M.2 cards.
Low Power Consumption: M.2 devices are limited to 7W or less, making them energy efficient.
High Speed: M.2 slots can support two to four PCIe lanes, with PCIe 4.0 providing a transfer rate of 16 Gb/s per lane.
Advanced PCIe M.2 Gen 5 Connectors: These connectors have 67 contacts on a 0.50 mm pitch, support single- and double-sided modules, and require less board space compared to mPCIe connectors. Additional features include:
Various connector heights and keying options
Support for angled insertion of modules
Availability in right angle or vertical orientations
EDSFF for Storage
The EDSFF (Enterprise and Data Center SSD Form Factor) specification was developed by the Storage Networking Industry Association's SSD Small Form Factor (SNIA SFF) Technology Affiliate group to meet data center storage needs. It was created to overcome the limitations of legacy form factors by providing an optimized specification for NAND flash memory and other devices. The benefits of the EDSFF connector specification include:
Enhanced Signal Integrity: Supports PCIe 5.0 and PCIe 6.0.
Unified Connector Standard: A single connector standard that supports all EDSFF configurations.
Versatility: Flexible enough to support chassis and backplane applications.
Higher Power Capacity: Supports power levels up to 70W.
OCP NIC 3.0 for More Power
The OCP NIC 3.0 specification offers three form factors: Small Form Factor (SFF), Tall Small Form Factor (TSFF), and Large Form Factor (LFF).
SFF and TSFF: These configurations can support up to 16 PCIe lanes and handle up to 80W of power to the NIC.
LFF: This configuration can support up to 32 PCIe lanes and handle up to 150W of power with a dual connector setup.
OCP NIC 3.0 is compatible with PCIe Gen 4 (16 Gb/s) on both the baseboard and the OCP NIC 3.0 card, and it is electrically compatible with PCIe Gen 5 (32 Gb/s). Each OCP NIC 3.0 card can handle up to 32 PCIe lanes and supports single-host, multi-root complex, and multi-host environments. Future iterations are expected to support differential pairs up to 64 G PAM4, with plans to upgrade to 112 G PAM4 and 224 G PAM4 further down the line.
Card Edge Connector Features
Contact Points: The connector has a series of contact points that align with the conductive traces on the edge of the PCB.
Slots and Guides: The connector often has slots and guides to ensure proper alignment and insertion of the PCB.
Variety of Sizes: They come in various sizes and pin configurations to suit different applications.
Durability: Designed to withstand repeated insertions and removals without degrading the contact quality.
Card Edge Connector Applications
Computers: Commonly used in computer expansion slots, such as PCI, PCI Express, and AGP slots.
Consumer Electronics: Found in devices like game consoles and certain types of audio/video equipment.
Industrial Equipment: Used in various industrial machines and control systems.
Telecommunications: Employed in communication devices and systems for connecting various components.
Card Edge Connector Advantages
Simplicity: Easy to insert and remove, making them ideal for user-replaceable components.
Cost Effective: Generally cheaper to produce and implement than other types of connectors.
Versatility: Available in many configurations to meet different design requirements.
Card Edge Connector Disadvantages
Wear and Tear: Repeated use can lead to wear and loss of contact quality.
Environmental Sensitivity: Can be susceptible to dust and debris, which might affect performance.
Card Edge Connector Types
A card edge connector is a type of electrical connector used to connect a printed circuit board (PCB) to an external device. It is called "card edge" because it connects via the edge of the PCB, where conductive traces are exposed and act as contacts for the connector.
This type of board edge connector is engineered for high Signal Integrity (SI) on printed circuit boards (PCBs). Our card edge connectors, designed to maximize PCB real estate, offer performance reliability and design flexibility for the latest PCIe protocol solutions. The product portfolio includes right angle, surface mount sockets with 52 contacts for express mini cards and 76 contacts for display mini cards. Select models feature latches for different heights. Some products in this category can support multiple function add in cards and modules, including WiFi, Bluetooth, global navigation satellite systems, near field communication, and Wireless Gigabit Alliance (WiGig).
GUOYUAN ELECTRONICS can offer a wide range of pcb edge connector with different specifications and features. You can visit our website or contact us directly to inquire about card edge connector pcb offerings, specifications, pricing, and any other details you may need to make an informed decision.
References
EDSFF – A New SSD Form Factor for Next Gen Servers and Storage, Kioxia
How Artificial Intelligence (AI) Is Transforming NVMe SSDs, Microchip
PCIe M.2 Gen 5 Card Edge Connectors, Amphenol
The M.2 interface, Delock
Unlocking the Power of Cloud Storage and Compute with EDSFF SSDs, Solidigm
What Is The M.2 Expansion Slot?, Premio
The best sneakers for women may not always be the most glamorous purchase, but they are an essential part of many wardrobes. Whether you usually wear heels or have a collection of loafers and ballet flats, there will be a day when you reach for those comfortable stylish sneakers waiting in your closet. The ideal sneakers are versatile enough to match any outfit, whether you prefer an affordable classic or a luxury designer pair.
If you're looking for a starting point, you can't go wrong with the iconic sneaker brands. You can also choose based on material or silhouette, such as a leather low top or a canvas slip on. For street style credibility, consider high fashion collaborations or gorpcore options that blend utilitarian features with contemporary design. The key is to find the style you prefer—whether sporty, chunky, or slim—then decide on the colorway and material. Minimal white sneakers are popular for their versatility, complementing nearly any outfit, but depending on your color preferences, you might prefer a shoe that combines blacks, browns, or grays.
While there’s a time and place for flashy or trendy sneakers, having a pair of trainers with staying power is essential. These can become your signature shoe, effortlessly matching any outfit. From coveted designer iterations to timeless classics, choose from the following selection of women's sneakers that will never go out of style.
Timeless Leather
A leather sneaker is always a great place to start: the material improves with age and provides a snug, secure fit. Leather is a robust material that withstands wear and tear, making leather sneakers long lasting. At the same time, Leather molds to your feet over time, providing a customized, comfortable fit. Leather allows air to circulate, keeping your feet cool and reducing moisture build up. Leather has a classic, timeless look that improves with age, developing a unique patina over time.
Put it in Retro
Designers have been revisiting vintage inspired sneakers for a while now. These sneakers often feature a narrow silhouette that tapers at the foot, creating an elongated look. These retro sneakers often feature simple, clean designs that can easily be paired with a variety of outfits, from casual jeans to more polished looks. Also, Retro sneakers evoke a sense of nostalgia, bringing back memories of iconic fashion eras and adding a touch of vintage charm to your wardrobe.
Classic White
You can't go wrong adding a crisp white trainer to your lineup; it's the easiest sneaker to style and incredibly versatile. White trainers seamlessly complement any outfit, from casual jeans and a T shirt to more polished ensembles like a tailored blazer and trousers. Their clean, minimalist design makes them a wardrobe staple that can effortlessly transition from day to night. Whether you're dressing for a casual weekend outing, a day at the office, or a night out with friends, white trainers provide a chic, timeless foundation that enhances your look. Additionally, they pair well with a wide range of colors and patterns, making them a reliable go to choice for any fashion situation. Investing in a pair of white trainers ensures you have a reliable, stylish option that can adapt to any occasion and keep you looking effortlessly put together.
The Cool Girl Pick
Whether you consider it gorpcore or sporty chic, the street style set adores a practical, supremely comfy sneaker for everyday wear. These sneakers offer the perfect blend of functionality and fashion, making them a favorite among style enthusiasts. Sporty, Dad style sneakers, in particular, tend to be the most popular in this category. Their appeal lies in their accessible price points and the nearly constant stream of new arrivals, often available in limited edition colorways that keep the trend fresh and exciting.
Dad style sneakers provide exceptional comfort and support, ideal for those who are on their feet all day. With their chunky soles and cushioned interiors, they offer unparalleled comfort, making them a go to choice for long walks, running errands, or casual outings. Additionally, these sneakers often feature retro inspired designs, which add a nostalgic touch to any outfit while remaining thoroughly modern.
The Old School Canvas
You may recall canvas shoes as the original tennis sneakers, with plimsolls serving as their lighter weight counterparts for school gym classes. Nowadays, this breathable fabric is featured in a wide range of styles. Those who appreciate quiet luxury will be drawn to the latest interpretation: a sleek canvas design combined with breathable mesh.
Slip on and Go
You may have moved on from slip ons since graduating high school, but their enduring appeal is undeniable. With slip ons, you enjoy the effortless convenience of sliding your foot in and being instantly ready to go. These shoes offer a blend of comfort and ease that makes them a timeless choice for casual wear. Whether you're running errands, heading to the beach, or simply lounging at home, slip ons provide a laid back style that never goes out of fashion. Their simplicity and versatility make them a go to option for those who appreciate both comfort and practicality in their footwear.
Believe it or not, it’s already time to explore the key sneaker trends for summer 2024 — and we're excited about it. As you update your wardrobe with the latest spring and summer fashion trends, why not refresh your shoe collection too? This year brings a range of new and trendy options that are particularly noteworthy.
The prevailing theme is athletic, with slim, retro styles taking center stage in the 2024 sneaker trends (thanks to the rise of tenniscore). When it comes to colors, there are two main camps to choose from: neutrals such as ecru and black, and statement hues like bright yellow and vibrant pink that promise to dominate street style this season. You'll have ample opportunities to make a statement with your footwear, especially with metallic finishes and printed uppers gaining popularity.
Get ready to mix and match these stylish sneakers with your favorite summer outfits, whether you opt for a classic, understated look or decide to go bold with vibrant colors and eye catching patterns. This summer's sneaker trends offer something for everyone, ensuring you'll find the perfect pair to complement your personal style and elevate your seasonal wardrobe.
If you have any needs for ideal shoes sneakers, please contact HEVA for your best fit!
Types of Laboratory Cuvettes
Applications of Laboratory Cuvettes
How to Determine Cuvette Volume
In Romans 16, the Apostle Paul sent greeting to many people. But right in the middle of them, the Holy Spirit prompted him give one more warning to the church followed by a beautiful benediction. Click on the link below to read Paul's final words to the Roman church. #BibleStudy #Devotions #Discipleship #Romans #Salvation
https://www.ramckinley.com/romans-16-pauls-final-instructions/
Diamond blades are indispensable tools in various industries, from construction to gem cutting. They are renowned for their efficiency in cutting through hard materials like concrete, asphalt, and even gemstones. But have you ever wondered if these blades actually contain real diamonds? Moreover, what are segments, and how do they contribute to the blade’s functionality? In this article, we delve into the basics of diamond blades, exploring the composition, structure, and functionality behind these essential cutting tools.
https://bsptools.com/wp-content/uploads/2024/04/图片3-2-350x233.png 350w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-1024x683.png 1024w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-165x110.png 165w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-768x512.png 768w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-1536x1024.png 1536w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-2048x1365.png 2048w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-24x16.png 24w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-36x24.png 36w, https://bsptools.com/wp-content/uploads/2024/04/图片3-2-48x32.png 48w" alt="Do Diamond Blade Really Contain Diamonds?" width="950" height="633" data-fr-image-pasted="true" />
Understanding Diamond Blades:
At first glance, the term “diamond blade” might imply that the blade itself is composed entirely of diamonds. However, this is not the case. While diamonds are indeed a key component, they are not the sole material used. In fact, the diamond content in a typical diamond blade is relatively low compared to the overall composition.
Diamond blades consist of two primary components: the steel core and the segments. The steel core serves as the structural backbone of the blade, providing stability and support during cutting operations. Meanwhile, the segments are the outer edge of the blade where the diamonds are embedded.
Diamonds in Blade Segments:
The segments of a diamond blade are where the magic happens. These are the sections of the blade that come into direct contact with the material being cut. Each segment contains a mixture of diamonds and metal powders, typically bonded together using a metal matrix.
Contrary to popular belief, the diamonds used in diamond blades are not the dazzling gemstones we commonly associate with jewelry. Instead, they are industrial-grade diamonds, which are specifically manufactured for cutting applications. These diamonds are synthetically produced under high-pressure, high-temperature conditions, making them extremely durable and suitable for cutting hard materials.
The Role of Segments:
Segments play a crucial role in the cutting process. As the blade rotates, the segments make contact with the material, initiating the cutting action. The diamonds embedded within the segments act as abrasive particles, grinding away the material with each rotation of the blade.
However, the effectiveness of a diamond blade depends not only on the quality of the diamonds but also on the design and composition of the segments. Various factors, such as the size and concentration of diamonds, the type of metal matrix, and the segment’s bond strength, can influence the blade’s cutting performance.
Types of Segments:
Diamond blade segments come in a variety of shapes and sizes, each designed for specific cutting applications. Some common segment configurations include:
https://bsptools.com/wp-content/uploads/2024/04/图片4-3-350x233.png 350w, https://bsptools.com/wp-content/uploads/2024/04/图片4-3-165x110.png 165w, https://bsptools.com/wp-content/uploads/2024/04/图片4-3-24x16.png 24w, https://bsptools.com/wp-content/uploads/2024/04/图片4-3-36x24.png 36w, https://bsptools.com/wp-content/uploads/2024/04/图片4-3-48x32.png 48w" alt="Do Diamond Blade Really Contain Diamonds?" width="950" height="633" />
- Segmented Rim:Segmented rim blades feature large, continuous segments with gaps between them. These blades are ideal for general-purpose cutting of materials like concrete, brick, and masonry.
- Turbo Rim: Turbo rim bladeshave a serrated edge with narrow ridges, allowing for faster cutting speeds and improved cooling. They are commonly used for cutting through hard materials such as granite, marble, and ceramic tiles.
- Continuous Rim: Continuous rim bladeshave a smooth, continuous edge without any breaks or segments. This design provides a clean and precise cut, making them suitable for delicate materials like glass and porcelain.
- Segmented Turbo: Segmented turbo bladescombine the features of segmented and turbo rims, featuring both large segments and serrated edges. These blades offer a balance of speed and precision, making them versatile for various cutting tasks.
Conclusion:
In conclusion, while diamond blades do contain diamonds, they are not entirely made of these precious gemstones. Instead, diamonds are strategically embedded within the segments of the blade, where they act as abrasives for cutting hard materials. The design and composition of these segments play a critical role in the blade’s performance, with various configurations available to suit different cutting applications. By understanding the basics of diamond blades and segments, professionals can make informed decisions when selecting the right tool for their cutting needs, ensuring efficiency, precision, and safety in their operations.
El desbaste es un proceso esencial en diversas industrias, desde la fabricación de metales hasta la carpintería y la albañilería. Implica el uso de materiales abrasivos para eliminar el exceso de material o dar forma a una pieza de trabajo según la forma deseada. Una de las herramientas principales empleadas para este propósito es el disco de desbaste, una herramienta versátil y potente que puede realizar rápidamente tareas de desbaste grueso. Sin embargo, al igual que cualquier herramienta, utilizar un disco de desbaste de manera efectiva y segura requiere habilidad y conocimiento. En este artículo, exploraremos consejos esenciales para el desbaste con disco de desbaste para ayudarte a obtener los mejores resultados mientras mantienes la seguridad.
1. Elige el disco de desbaste adecuado
Seleccionar el disco de desbaste apropiado es el primer y quizás el paso más crucial en el proceso de desbaste grueso. Existen diferentes tipos de discos de desbaste, cada uno diseñado para tareas y materiales específicos. Vamos a profundizar en los diversos tipos:
- Ruedas de desbaste: Son las herramientas fundamentales del desbaste grueso y están disponibles en varios materiales abrasivos, agentes de unión y tamaños de grano. Por ejemplo, las ruedas de óxido de aluminio son adecuadas para el desbaste general de acero, mientras que las ruedas de carburo de silicio son más adecuadas para metales no ferrosos, piedra y cerámica. Las ruedas de alúmina cerámica están diseñadas para aplicaciones de alta resistencia y tasas de eliminación de material elevadas. La elección del material abrasivo y del tamaño de grano depende de la dureza de la pieza de trabajo y del acabado deseado.
- Discos de láminas: Son versátiles e ideales para tareas de mezcla, acabado y pulido, lo que los hace adecuados tanto para metal como para madera. Estos discos consisten en varias láminas abrasivas dispuestas radialmente alrededor de un centro. Los discos de láminas se pueden categorizar por su material abrasivo, material de respaldo y tamaño de grano. Por ejemplo, los discos de láminas de óxido de aluminio con respaldo de fibra de vidrio son comunes y están disponibles en varios tamaños de grano, lo que permite diferentes acabados superficiales.
- Ruedas de copa de diamante: Para el desbaste de hormigón y piedra, las ruedas de copa de diamante son indispensables. Vienen en varios tipos optimizados para aplicaciones específicas. Las ruedas de copa de diamante segmentadas son ideales para la eliminación de material pesado y el desbaste grueso de hormigón y albañilería. Las ruedas de copa de diamante turbo tienen un diseño de borde serrado que proporciona un corte más rápido y acabados más suaves. Las ruedas de copa de diamante de borde continuo se utilizan para el desbaste y pulido precisos de superficies de piedra.
- Cepillos metálicos:Son herramientas versátiles para la limpieza, eliminación de óxido y decapado de pintura en superficies metálicas. Estos cepillos vienen en múltiples tipos de alambre, incluidos acero, latón y acero inoxidable. Los cepillos de alambre de acero son ideales para la limpieza agresiva, mientras que los cepillos de alambre de latón son más suaves y adecuados para pulir materiales más blandos. Los cepillos de alambre de acero inoxidable son resistentes a la corrosión y se utilizan para acero inoxidable y otros metales no ferrosos. Los cepillos metálicos pueden tener diversas configuraciones, como cepillos de copa, cepillos de rueda y discos de cepillo.
- Conos y tapones de desbaste: Estos accesorios de desbaste especializados están diseñados para llegar a espacios y contornos estrechos. Vienen en diversas formas y tamaños, incluidos cilíndricos, cónicos y tapones puntiagudos. Se utilizan comúnmente para el desbarbado, la mezcla y la conformación de piezas de trabajo con detalles intrincados.
Ahora que tenemos una comprensión más profunda de los tipos de discos de desbaste disponibles, pasemos a los consejos esenciales para utilizarlos de manera efectiva y segura.
2. Usa el equipo de seguridad adecuado
La seguridad debe ser una prioridad principal al usar un disco de desbaste. Usa equipo de protección adecuado para protegerte de posibles peligros, que incluyen:
- Gafas de seguridad o protector facial: Protegen tus ojos de chispas, escombros y partículas abrasivas.
- Protección auditiva: El desbaste puede ser ruidoso, por lo que es esencial usar protección auditiva para prevenir daños auditivos.
- Mascarilla o respirador: Dependiendo del material que estés desbastando, es posible que necesites protección contra polvo y partículas en el aire.
- Guantes: Guantes gruesos y duraderos protegerán tus manos de chispas y materiales abrasivos.
- Ropa de manga larga: Usa ropa que cubra tus brazos y piernas para minimizar el riesgo de quemaduras y abrasiones.
Mantener el equipo de seguridad es indispensable; reduce significativamente el riesgo de accidentes y lesiones en tu espacio de trabajo.
3. Inspecciona y prepara tu disco de desbaste
Antes de comenzar a desbastar, inspecciona el disco de desbaste en busca de signos de daño o desgaste. Asegúrate de que esté correctamente montado en el husillo del esmeril y bien asegurado. Un disco suelto o dañado puede ser extremadamente peligroso y causar lesiones graves o daños a la pieza de trabajo.
Además, verifica la velocidad recomendada del disco de desbaste y asegúrate de que tu esmeriladora funcione a las RPM (revoluciones por minuto) recomendadas especificadas por el fabricante. Usar un disco a la velocidad incorrecta puede resultar en sobrecalentamiento, falla del disco y accidentes.
4. Mantén un agarre firme y una posición corporal adecuada
La posición corporal adecuada y el agarre firme son cruciales para mantener el control y la estabilidad mientras desbastas. Sigue estas pautas:
- Mantén los pies separados al ancho de los hombros para una postura estable.
- Agarra firmemente las empuñaduras del esmeril con ambas manos.
- Posiciónate a un lado del esmeril en lugar de alinearte con él para evitar el riesgo de ser golpeado por chispas o escombros.
Mantener una postura estable y equilibrada te ayudará a controlar el disco de desbaste con precisión y minimizar el riesgo de accidentes.
5. Comienza con una presión ligera
Cuando comiences a desbastar, es esencial empezar con una presión ligera sobre la pieza de trabajo. Aplicar fuerza excesiva puede provocar sobrecalentamiento y desgaste prematuro del disco de desbaste. A medida que te familiarices con el material y el rendimiento del esmeril, puedes aumentar gradualmente la presión para lograr la velocidad de eliminación de material deseada.
6. Usa la técnica adecuada
El desbaste requiere una mano firme y la técnica adecuada para lograr resultados suaves y uniformes. Aquí tienes algunas técnicas clave a tener en cuenta:
- Mueve el esmeril de lado a lado:Para superficies planas, mueve el esmeril en un movimiento de lado a lado, solapando cada pasada ligeramente para garantizar un desbaste uniforme.
- Mantén un ángulo constante:Mantén un ángulo de desbaste constante para evitar crear surcos o superficies desiguales. Esto es particularmente importante al trabajar en bordes biselados o redondeados.
- Usa un movimiento controlado de vaivén:Al desbastar bordes o esquinas, utiliza un movimiento de vaivén controlado para evitar sobredesbaste en un punto.
- Evita el sobrecalentamiento: Mantén en movimiento el disco de desbaste para evitar la acumulación excesiva decalor, lo cual puede provocar que el material se deforme o que el disco se desgaste rápidamente.
7. Mantén el área de trabajo limpia
Mantener un área de trabajo limpia no solo es una consideración de seguridad, sino también crucial para lograr los mejores resultados. El desbaste genera una cantidad significativa de polvo y escombros, que pueden obstruir tu vista y crear un entorno peligroso. Usa un sistema de recolección de polvo o usa una mascarilla antipolvo para minimizar las partículas en el aire. Además, limpia regularmente el área de trabajo para evitar riesgos de tropiezos y mantener una línea de visión clara.
8. Enfría según sea necesario
Durante sesiones prolongadas de desbaste, es importante permitir que la pieza de trabajo y el disco de desbaste se enfríen periódicamente. El sobrecalentamiento puede provocar desgaste del disco y daños. Para enfriar la pieza de trabajo, simplemente detén el desbaste por unos momentos mientras mantienes la posición del esmeril. Este breve descanso puede ayudar a prevenir problemas relacionados con el calor.
9. Verifica tu progreso con frecuencia
Inspecciona regularmente la pieza de trabajo para evaluar tu progreso y asegurarte de que estás logrando los resultados deseados. Esto te ayudará a realizar ajustes necesarios en términos de presión, ángulo o técnica para lograr un acabado consistente.
10. Ten paciencia
El desbaste grueso puede ser un proceso que consume tiempo, especialmente al tratar con materiales difíciles. Es importante tener paciencia y evitar apresurarse en el trabajo. Aplicar presión excesiva o trabajar demasiado rápido puede provocar errores, sobrecalentamiento y desgaste excesivo del disco de desbaste. Tómate tu tiempo para lograr los mejores resultados de manera segura y efectiva.
11. Mantenimiento y almacenamiento del equipo
Después de completar tus tareas de desbaste, asegúrate de limpiar adecuadamente tu equipo, incluido el disco de desbaste y el esmeril. Almacénalos en un lugar seco y seguro para evitar daños y mantener su longevidad. El mantenimiento regular, como lubricar las partes móviles e inspeccionar el esmeril en busca de desgaste, es fundamental para garantizar un funcionamiento seguro y eficiente.
Conclusión
En conclusión, el desbaste con disco de desbaste es un proceso versátil y potente que puede ayudarte a dar forma y acabar diversos materiales. Sin embargo, es importante priorizar la seguridad usando el equipo de protección adecuado, eligiendo el disco de desbaste adecuado y siguiendo las técnicas correctas. Siguiendo estos consejos y practicando precaución, puedes lograr excelentes resultados mientras minimizas el riesgo de accidentes o lesiones en tus proyectos de desbaste. Recuerda que la práctica y la experiencia mejorarán tus habilidades con el tiempo, haciéndote un desbastador más competente y eficiente.
Greetings in The Mighty Name of Jesus, The Christ!!!
Gods Word
1 Corinthians 14:33 KJV
“For God is not [the author] of confusion, but of peace, as in all churches of the saints."
Brothers and Sisters read the above Scripture again, now, read it again… For Jesus, The Father and The Holy Spirit are NOT A AUTHOR OF CONFUSION, in other words, when God Speaks, it is to all with the same intent, when God Moves, it is to all with the same intent and that is, that we may be Conformed Into His Likeness!!!
If you look at the many churches there are today, they are Built upon a Man or a Group of people, with Their Doctrine Beliefs, slicing and dicing The Word to fit their own agenda.
The multiple of churches should all be in One Accord, taking in the Fullness of The Word and being lead by The Holy Spirit. Every church should be following the following outline…
1 Corinthians 14:26-32 KJV
"26 How is it then, brethren? when ye come together, every one of you hath a psalm, hath a doctrine, hath a tongue, hath a revelation, hath an interpretation. Let all things be done unto edifying. 27 If any man speak in an [unknown] tongue, [let it be] by two, or at the most [by] three, and [that] by course; and let one interpret. 28 But if there be no interpreter, let him keep silence in the church; and let him speak to himself, and to God. 29 Let the prophets speak two or three, and let the other judge. 30 If [any thing] be revealed to another that sitteth by, let the first hold his peace. 31 For ye may all prophesy one by one, that all may learn, and all may be comforted. 32 And the spirits of the prophets are subject to the prophets."
For there are many things of Order that are in the above Scriptures, but the point is to those who do not Believe, who do not Accept, who have Written Their Own God, to Understand that God knows the Diversity that is among you, but it is the Same God whom moves. For there are Speaking Of Tongues rather YOU Believe or not does not matter, but what does matter is that God Says that there is. There is still The Office Of A Prophet rather YOU Believe or not does not matter, but what does matter is that God Says that there is.
Here’s one that will Offend many…
1 Corinthians 14:34-35 KJV
"34 Let your women keep silence in the churches: for it is not permitted unto them to speak; but [they are commanded] to be under obedience, as also saith the law. 35 And if they will learn any thing, let them ask their husbands at home: for it is a shame for women to speak in the church."
Before anyone makes a quick Judgment and says that was under the Law, understand this was written to a New Testament Church about Order. Also to those who do not understand, the Grace that we have does not Change The Law, but Fulfills The Law.
Romans 3:31 KJV
“Do we then make void the law through faith? God forbid: yea, we establish the law."
Look how far The Church has wondered off the path that God has designed, that Men and Woman rebel against to have their own ways brought to light!!!
Our Brother Paul asked a very important question, with a statement…
1 Corinthians 14:36-38 KJV
"36 What? came the word of God out from you? or came it unto you only? 37 If any man think himself to be a prophet, or spiritual, let him acknowledge that the things that I write unto you are the commandments of the Lord. 38 But if any man be ignorant, let him be ignorant."
This Question is sarcastic, Paul says “What?”, then God only Spoke To YOU?, then Our Brother put’s all whom he is speaking to in their place by saying, everything that I am Writing to YOU is a…What…is a COMMANDMENT Of Jesus!!! Then the icing on the cake, Paul says, if you want to be Ignorant, Stupid, then Do Not Believe what I just told you and go on YOUR Way!!!
So then, I tell you who want to be Ignorant, Stupid, that All of the Scriptures that YOU do not agree with, tear them out of YOUR Bible right now, they are, in YOUR GREAT UNDERSTANDING, Not from God and should NOT BE DONE! Whom do YOU think YOU are!!!!
But this is what God says to all those who have Judged His Word, who have Changed His Word…
Read Job chapters 38, 39, 40, 41, 42 KJV
Job 40:2, 8 KJV
"2 Shall he that contendeth with the Almighty instruct [him]? he that reproveth God, let him answer it. ... 8 Wilt thou also disannul my judgment? wilt thou condemn me, that thou mayest be righteous?"
Job 41:11 KJV
“Who hath prevented me, that I should repay [him? whatsoever is] under the whole heaven is mine."
Isaiah 40:13-14 KJV
"13 Who hath directed the Spirit of the LORD, or [being] his counsellor hath taught him? 14 With whom took he counsel, and [who] instructed him, and taught him in the path of judgment, and taught him knowledge, and shewed to him the way of understanding?"
Who are WE to tell God, to tell Jesus, this is now incorrect, You God, You Jesus need to get with the times and upgrade Your Program! If you just read Job, then you will find a Creator that cannot be questioned on His Reasons for having or doing something, all things are at His Will!!! If you Read Isaiah above, then WHO will Counsel Jesus???
I Believe the Entire Bible and the Entire Bible IS God’s Word, not mine, not yours. If Jesus says I can Speak In Tongues, then I will speak in tongues, if Jesus said that the Woman is Man’s Helpmate, then the woman is man’s helpmate, if Jesus says that He is the Head of The Church, then Jesus is The Head Of The Church. If Jesus said that Man is the Head of a Woman, then the man is the head of the woman!!! It does not matter What I THINK or What I WANT, Jesus will have His Way no matter what. If all the Earth wants to Walk in THEIR OWN ACCORD and I am the only one left to follow His Word, then so be it, I will not change no matter what anyone says or does!!!
God, Jesus, has a Reason for everything rather we want to Believe it or not will not matter to Him, His Word Stands!!! I am not saying that I do not Ask Jesus or Seek Him for an Answer that I do not have, but I do understand that Jesus is God and there are many thing I do not understand, that I do question, but no matter what Jesus has the only answer that matters. There are many times that I just have to let go and just Trust Jesus about those things that concern my life. I am not going to Change The Bible, God’s Word, to satisfy me and then turn around and figure out How I Can Justify what I am doing. We all need to learn what Jesus did in the garden, when He said “NOT My Will, but, LET YOUR Will My Father BE DONE IN ME”. If we were all to follow this, there would not be a hundred thousand churches with their own doctrine, but there would be a hundred thousand Churches saying the same thing, doing the same thing. There would be no more denominations or walls that separate us be we would fulfill the Scripture that says…
Ephesians 4:13-16 KJV
"13 Till we all come in the unity of the faith, and of the knowledge of the Son of God, unto a perfect man, unto the measure of the stature of the fulness of Christ: 14 That we [henceforth] be no more children, tossed to and fro, and carried about with every wind of doctrine, by the sleight of men, [and] cunning craftiness, whereby they lie in wait to deceive; 15 But speaking the truth in love, may grow up into him in all things, which is the head, [even] Christ: 16 From whom the whole body fitly joined together and compacted by that which every joint supplieth, according to the effectual working in the measure of every part, maketh increase of the body unto the edifying of itself in love."
Brothers and Sisters it past time that we Repent and return to the Bible in its entirety and Walk Accordingly! Many cry out that they want to see the United States great again and I say we need to cry out that we make Jesus Lord and King!!!
We say we want to see Jesus in control, but are you willing to turn from YOUR Wicked Ways to do so?
2 Chronicles 7:14 KJV
“If my people, which are called by my name, shall humble themselves, and pray, and seek my face, and turn from their wicked ways; then will I hear from heaven, and will forgive their sin, and will heal their land."
God did not say for all of mankind to do the above, but God was Speaking Directly to His People and today to The Church that Jesus sacrificed for.
Jesus is coming again to receive His Bride The Church, are YOU Ready?
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
A giant ship's engine broke down and no one could repair it, so they hired a Mechanical Engineer with over 30 years of experience.
He inspected the engine very carefully, from top to bottom. After seeing everything, the engineer unloaded his bag and pulled out a small hammer.
He knocked something gently. Soon, the engine came to life again. The engine has been fixed!
A week later the engineer mentioned to the ship owner that the total cost of repairing the giant ship was $20,000.
"What?!" said the owner. “You did almost nothing. Give us a detailed bill."
The Engineer replied him “The answer is simple:”
Tap with a hammer: $2
Know where to knock and how much to knock: $19,998
The importance of appreciating one's expertise and experience...because those are the results of struggles, experiments and even tears.
If I do a job in 30 minutes it's because I spent 20 years learning how to do that in 30 minutes. You owe me for the years, not the minutes.
The Bible is clear that we must avoid sin at all costs. It contains detailed instructions and lists of things we should stay away from. But what do we do about the things the Bible doesn't cover? How do we handle those grey areas of sin? To get some answers on the subject, click on the link below. #BibleStudy #Devotions #Discipleship #Romans #sin
Specification Details
Other Details and Considerations
Diagnosing Tractor Water Pump Bearing Failure
Structure of Tractor Water Pump Bearings
Functions and Features of Tractor Water Pump Bearings:
Types of Bearings Used:
Importance in Tractor Operation:
How Do You Test A Tractor Water Pump Bearing?
By following the Lord's instructions, Joshua led the nation of Israel into the promised land across the backed-up Jordan River and defeated the walled City of Jericho. When they came to the small town of Ai, they made the mistake of taking matters into their own hands. Click on the link below to benefit from the lessons in this story. #2Chronicles #BibleStudy #Devotions #Discipleship
https://www.ramckinley.com/depend-on-god-in-all-your-battles/
Greetings in The Mighty Name of Jesus, The Christ!!!
Blessed Are
Brothers and Sisters how do you Count Your Blessings, is it in Wealth, is it in Knowledge, is it in Whom You Know or some other fashion that satisfy’s your flesh? Those who Seek The Kingdom Of Heaven and Seek God’s Righteousness are Blessed beyond all of the Gold and Silver that is upon this earth. But to those who do, there is a Cost.
Matthew 6:31-34 KJV
"31 Therefore take no thought, saying, What shall we eat? or, What shall we drink? or, Wherewithal shall we be clothed? 32 (For after all these things do the Gentiles seek:) for your heavenly Father knoweth that ye have need of all these things. 33 But seek ye first the kingdom of God, and his righteousness; and all these things shall be added unto you. 34 Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day [is] the evil thereof."
This is the First Cost of being a Disciple Of Jesus, that is, we do not Worry about Tomorrow, we do not Worry about Hunger, we do not Worry about Thirst, we do not Worry about our Apparel, we Do Not Worry! A True Disciple of Jesus Knows and Trust Jesus for all things, no matter what the Need Is. I have counseled many that they say that Jesus has Called them in to doing something, but yet Jesus does not Supply according to Their Words. I have told them if Jesus actually Called You to do something then it is His Responsibility To Supply according to The Need.
I have been in many different situations that Jesus told me to do this or to do that and in every situation Jesus Supplied According To The Need, even when debt would enter my thoughts. I have counseled those who have started churches and were struggling to keep the doors open, that The Holy Spirit revealed they were never Called to do such a thing, but that They Had Chosen to do so on Their Own Accord. Blessed Are those who Seek Not Their Own!
Another Requirement is to Die To Self…
John 12:24-25 KJV
"24 Verily, verily, I say unto you, Except a corn of wheat fall into the ground and die, it abideth alone: but if it die, it bringeth forth much fruit. 25 He that loveth his life shall lose it; and he that hateth his life in this world shall keep it unto life eternal."
Matthew 10:39 KJV
“He that findeth his life shall lose it: and he that loseth his life for my sake shall find it."
Our Will, Our Desires Of The Flesh, must Die, must Not Be IN Control and The Will Of The Father Must Dominate above anything else that is in the world. Our Will becomes The Fathers Will, Our Desires becomes Jesus Desires to Glorify The Father!
There are many things that are in this world that The Flesh Desires and we have a Free Will to Choose How we will Live. We have to Weigh all things to their Worth according to The Word and The Holy Spirit. For example which is more important to you, watching a Football Game on Sunday or spending time with Your Family, which has a more Godly Effect?
Our Choices should always be to put Jesus First above All Things, to put His Ways before our own.
John 14:15 KJV
“If ye love me, keep my commandments."
One of the hardest test is to Love and Obey Jesus above Family and Friends. These are the people that we have built a bond with, that we count on to have our backs in times of need or trouble. These are the ones that it seems we can talk to about anything that comes into our lives. As the old saying goes, “Blood is thicker than Water”, which is the exact point, that The Blood of Jesus is the Dominating Factor!
Blessed Are…We when Obedience becomes greater than the Sacrifice that we must give and the Cost Of The Sacrifice has No Bearing.
Matthew 19:29 KJV
“And every one that hath forsaken houses, or brethren, or sisters, or father, or mother, or wife, or children, or lands, for my name's sake, shall receive an hundredfold, and shall inherit everlasting life."
The Sacrifice does not outweigh the Obedience that we must Choose To Do. It is the hardest thing that we must do at times, but we will be Blessed because of it. To lose everything for Jesus sake is the ultimate Sacrifice In Obedience that shows our Love for Jesus. That we Put Jesus First and Above anything, anyone is our Greatest Testimony to The World that we can ever give.
1 Samuel 15:22 KJV
“And Samuel said, Hath the LORD [as great] delight in burnt offerings and sacrifices, as in obeying the voice of the LORD? Behold, to obey [is] better than sacrifice, [and] to hearken than the fat of rams."
We may not see our Blessings in this World but we will in The Kingdom Of Heaven. We must push ourselves to Walk according to The Word and The Holy Spirit and not according to the Will Of Man or Satan. We are in a Battle for Our Souls, for Eternity, Jesus has already won The War but we must continue in the Battles for our individual selves, and the way that we win, is by Walking In Obedience Of Love. Man and Satan cannot conquer us if we Freely Give Up Our Lives For Jesus. If we have nothing to hold on to accept Jesus then we win!!!
Romans 8:37-39 KJV
"37 Nay, in all these things we are more than conquerors through him that loved us. 38 For I am persuaded, that neither death, nor life, nor angels, nor principalities, nor powers, nor things present, nor things to come, 39 Nor height, nor depth, nor any other creature, shall be able to separate us from the love of God, which is in Christ Jesus our Lord."
The only thing missing in the list above is Our Free Will To Obey, that is the only thing that can Conquer Us. If we Choose to Walk in Ungodly Ways, then we have become Sacrifices To Satan’s Biding and Not to the Price Jesus paid. We are Blessed beyond anything or anyone in this World, but in order to Reach That Blessing we must make choices that Separate us from The World. It is not easy by no means and for some it will be a Life or Death situation or others it is just a matter of Choice.
Blessed Are those who give their all to Glorify Jesus, to Honor Jesus with Their Lives in All Things no matter the cost. Brothers and Sisters these Choices that we make are minute by minute, it is not once done and it’s over, but it is a continual Battle until we reach Heaven.
The Choice Is Yours!!!
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
Now outdoor stadium lighting generally uses LED floodlights. LED floodlights are energy-saving, durable, high-brightness, wide-angle lighting, waterproof and dustproof, etc., which can effectively improve the lighting effect of the stadium. And LED floodlights also have the function of adjustable color temperature. Let's take a closer look at Are stadium LED floodlights easy to use? What are the advantages and disadvantages of stadium LED floodlights?
Advantages of stadium LED floodlights:
1. High brightness and uniformity: LED lights can provide high-brightness lighting while ensuring uniform light distribution, reducing dark areas and glare, and creating a better visual experience for athletes and spectators.
2. Energy saving and environmental protection: LED lights are much more energy-efficient than traditional lighting equipment (such as metal halide lamps), which can significantly reduce energy consumption and carbon emissions, and meet the requirements of green buildings and sustainable development.
3. Long life: The life of LED lights is usually much longer than that of traditional bulbs, reducing the frequency of replacement, maintenance costs and workload.
4. Color reproduction: LED lamps have a high color reproduction index (CRI), which can present the color of objects more realistically, which is particularly beneficial for television broadcasting and photography.
5. Dimming and adjustable color temperature: LED lamps can easily adjust the brightness and color temperature to meet the needs of different competitions and activities, providing more flexible lighting control.
6. Instant start: LED lamps can be lit up to maximum brightness instantly, unlike some traditional lamps that require warm-up time, which is especially important in occasions where lighting needs to be adjusted quickly.
Disadvantages:
1. Higher price: Compared with traditional lamps, the manufacturing cost of LED lamps is higher, resulting in their relatively expensive selling price. However, with technological advancement and increased production, its price is gradually decreasing.
In summary, the use of LED lamps in stadiums has obvious advantages, including energy saving, long life, environmental protection, dimmable, safe and reliable, etc. Although its initial cost may be high, with the advancement of technology and the reduction of costs, LED lamps have become the preferred solution for stadium lighting.
Many people around the world are bound as slaves. Yes, the Bible says they are slaves to sin. There is, however, another kind of slavery in the kingdom of God. Paul told us in Romans that we must be slaves to righteousness. Click on the link below to read how to be free from the bondage of sin. #BibleStudy #Devotions #Evangelism #Romans #SetFree #sin
God exhibits an unchangeable love toward the entire human race. Our love for Him, though, is, at best, very inconsistent. Regardless, our actions will do nothing to stop God from loving us. I don't know what your perspective is of God's love but read today's post to get a clearer one. #BibleStudy #Devotions #Love #Romans #worship
Greetings in The Mighty Name of Jesus, The Christ!!!
Fear Of God
Brothers and Sisters it is time to do a Heart Check. There are too many of you that Do Not Fear God but treat God as a Commoner. We should Fear Jesus knowing that our very Lives He Holds in the balance of Life. Jesus has been given All Authority and Power in Heaven and Earth and is the only one worthy to Open The Book Of Life.
Too many of you Think that because of Grace, because of Mercy YOU have nothing to Fear, but by Who’s Standards are YOU Living? Our Brother Paul wrote that yes, we have been give Grace and Mercy but that does not give us the Right To Sin or Live however we choose to, God, Jesus still has Standards in which we are to Live By.
Romans 6:15 KJV
“What then? shall we sin, because we are not under the law, but under grace? God forbid."
This one Scripture alone should strike Fear into every Born Again, Blood Bought, heart, that it Proves there is a Standard that WE have to meet…
Matthew 7:21 KJV
“Not every one that saith unto me, Lord, Lord, shall enter into the kingdom of heaven; but he that doeth the will of my Father which is in heaven."
For The Standard that we must all meet is… Doing The Will Of The Father. No more is it, nor was it, that Confession Alone brings Salvation, but it is in The Confession that Must bring forth Actions in our lives Proving, not only Jesus, but also The Father! Fear Of God starts the Relationship Building into becoming One with The Father, One with Jesus and One with The Holy Spirit in all things in our lives.
The other day I had to Reproof a Brother because he called Jesus an “actor”, as one having a part to play. I told him that was Disrespectful To Jesus, that Jesus Our Lord is not some “actor” of today’s language and terms. Even after the Reproof there was No Fear to whom Jesus Our Lord is, but continued in Disrespect because they found it fair to call Jesus an “actor”.
I do not care What or How you mean something that comes out of your mouth or by Your Actions that bring Disrespect, Jesus is to be Feared above all things, He is Savior, Lord, King and Judge, having All Power and Authority to cast whomever into The Lake Of Fire for eternity!!!
Matthew 10:27-28 KJV
"27 What I tell you in darkness, [that] speak ye in light: and what ye hear in the ear, [that] preach ye upon the housetops. 28 And fear not them which kill the body, but are not able to kill the soul: but rather fear him which is able to destroy both soul and body in hell."
Too many of you Conduct Your Lives with No Fear, No Knowledge, No Wisdom of Whom We Serve, you think that YOU can treat Jesus as just “One Of The Boys…” to whom you are acquainted with and try by Your Own Understanding to Live a False Godly Life!
Hebrews 10:31 KJV
“[It is] a fearful thing to fall into the hands of the living God."
Too many of you Live in a World that has forgotten God in the Days Of Old, who showed His Power and Might upon those who were against Him. He is the Same God today, the Same Standards, the Same Desires, the Same Power, the Same Authority…and YOU have No Fear Of Him???
Hebrews 13:8 KJV
“Jesus Christ the same yesterday, and to day, and for ever."
Too many of you Do Not Fear what The Father, Jesus and The Holy Spirit have established, you have No Respect to them who Called into Office, having No Understanding that they are The Right Hand of Jesus to do the Work in which they have been anointed for. But YOU have Justified within yourselves to Change Jesus Rules to satisfy Your Flesh.
2 Corinthians 10:12 KJV
“For we dare not make ourselves of the number, or compare ourselves with some that commend themselves: but they measuring themselves by themselves, and comparing themselves among themselves, are not wise."
Jesus, whom we should Fear, set up…Jesus Set Up the following…
Ephesians 4:11-16 KJV
"11 And he gave some, apostles; and some, prophets; and some, evangelists; and some, pastors and teachers; 12 For the perfecting of the saints, for the work of the ministry, for the edifying of the body of Christ: 13 Till we all come in the unity of the faith, and of the knowledge of the Son of God, unto a perfect man, unto the measure of the stature of the fulness of Christ: 14 That we [henceforth] be no more children, tossed to and fro, and carried about with every wind of doctrine, by the sleight of men, [and] cunning craftiness, whereby they lie in wait to deceive; 15 But speaking the truth in love, may grow up into him in all things, which is the head, [even] Christ: 16 From whom the whole body fitly joined together and compacted by that which every joint supplieth, according to the effectual working in the measure of every part, maketh increase of the body unto the edifying of itself in love."
But You, Brothers and Sisters, think of yourselves Wiser Than Jesus, choosing your own Leadership with No Fear to Guide you in Ungodly Ways for Your Comfort!! Jesus did not establish the Five Offices for Your Comfort, but to bring You into a Healthy Fear of Whom God is to be Honored with.
Having the Correct Fear brings Rest, brings Comfort, brings a Right Relationship between you and Jesus. If you have Fear Of God in you, then it provides the means to Walk Godly as we should, but when there is No Fear Of God, then do we start to Justify ourselves with ourselves and those of like mind to do whatever we see fit or justified to do!
We Serve a Righteous Holy God that Demands things to be done His Way not ours. I mean think about it, Jesus can and has and will do again, bring Life back into a rotting corpse, can take dust from the Earth and make a man, can take water and turn it into wine, can feed five thousand people on just two fish and five loaves of bread and YOU Do Not Fear Him!!!
How far does YOUR Not Having Fear Go? It has Established Ungodly Ways! Right now in the United States we are preparing for a Presidential Vote and the two main people that are running are Ungodly, we are supposed to be Godly, but we are at odds with each other on Who To Vote for, but it should be easy. First before I go on, let’s Establish what is Ungodly, it is anything that goes against God, which also means His Word and His Spirit. So, to be able to Vote for anyone we should First Pray about it, Second Weigh that person Against The Bible to see if there is any wicked way in them, if so, then why would you vote for such a person? Yet here we are!!! Having a Fear Of God Established in Our Hearts and Minds would not allow us to be divided as we are. The Father, Jesus and The Holy Spirit are not going to tell a million Born Again people to vote for this person, while telling another million Born Again people to vote for the other person, sorry, that is NOT GOING TO HAPPEN, that would make God Crazy!!!
So then, HOW can this happen? It happens because of the lack of Fear towards God, that we do not care but only for our own selves and not what God Thinks or Wants. We should only be concerned with What does Jesus want and whatever that answer is, it is for the Wholly Body Of Christ, not just these guys on this side.
Proverbs 9:10 KJV
“The fear of the LORD [is] the beginning of wisdom: and the knowledge of the holy [is] understanding."
The Fear Of God Establishes Our Walk, Our Obedience to Jesus. Instead of the “I”, it should be “My Lord Jesus What Do YOU Want” and then just do it without question. Back in the old days of Kings and Lords, when they spoke it was done without question or else you could face death for not doing so, there was a Fear that was Established, so should a Fear Of God be Established in our lives to Live By!
We have an example of this…
Matthew 8:8-10 KJV
"8 The centurion answered and said, Lord, I am not worthy that thou shouldest come under my roof: but speak the word only, and my servant shall be healed. 9 For I am a man under authority, having soldiers under me: and I say to this [man], Go, and he goeth; and to another, Come, and he cometh; and to my servant, Do this, and he doeth [it]. 10 When Jesus heard [it], he marvelled, and said to them that followed, Verily I say unto you, I have not found so great faith, no, not in Israel."
…this is a Healthy Fear!!!
I am not saying that we should walk around with doom and gloom that at any minute we could die because of not doing something right, but we are to Understand Whom We Serve, knowing that Life and Death is in Our Lord Jesus Hands. That while we Walk in Obedience and Love, we can Rest and be Assured of being Safe in Jesus Hands!!!
Brothers and Sisters examine yourselves, do you really Fear God? Do you truly Understand that this is needed in building a Relationship With Jesus? Think on these things, meditate to find Understanding that Jesus being Lord is not just a title, it is a Position of Power and Authority!
Hebrews 10:31 KJV
“[It is] a fearful thing to fall into the hands of the living God."
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
Romans 11:22 says God is both kind and severe. "Severe" is a strong word and many don't want to hear about it. God wants as many as will to join Him in heaven. But, those who refuse to choose Jesus will spend eternity separated from Him. Also, click on the link below to see the difference between repenting and salvation. #BibleStudy #Devotions #Evangelism #Romans
Matthew 9 says when Jesus saw the crowds He had compassion on them. Why? Because many were sick? Or maybe because they were hungry. As a result of His compassion, He did heal and feed them. Click on the link below to see why He showed them compassion. #BibleStudy #Devotions #Discipleship #Love #Matthew
https://www.ramckinley.com/the-compassion-of-jesus-our-good-shepherd/