Who did Jesus die for? The Bible says God so loved the world, not just a select few. In other words, Jesus died and rose again to make salvation available for all. If salvation is for everyone, why then, won't everyone go to heaven? Click on the link below to find out. #BibleStudy #Devotions #Evangelism #Romans
Greetings in The Mighty Name of Jesus, The Christ!!!
Christians_In_Chaos_pt2
This is the Second part of Christians In Chaos, as we continue to look at Why people are not coming to a church( Denomination) and that most are Seeking the True Church.
Matthew 5:13 KJV
"Ye are the salt of the earth: but if the salt have lost his savour, wherewith shall it be salted? it is thenceforth good for nothing, but to be cast out, and to be trodden under foot of men."
7) The issue of clerical sexual abuse - The issue of clerical sexual abuse is a severe problem that has damaged the reputation of the Catholic Church and other Christian denominations. This issue makes it difficult for Christians to trust the church and its leaders.
This is has so many underlining issues that to get at the root would take a message in its self. But the First Issue as to the beginning of this cause is that Jesus did not Select most of these people who hold a Office, but were chosen by Man and Satan. The Second Issue is the Teachings, the Doctrine of these churches that Hold No One Accountable. The Offices that Jesus set, Apostle, Prophet, Evangelist, Pastor and Teacher would have taken care of Both of these issues.
2 Corinthians 11:13-15 KJV
"13 For such [are] false apostles, deceitful workers, transforming themselves into the apostles of Christ. 14 And no marvel; for Satan himself is transformed into an angel of light. 15 Therefore [it is] no great thing if his ministers also be transformed as the ministers of righteousness; whose end shall be according to their works."
Ephesians 2:19-22 KJV
"19 Now therefore ye are no more strangers and foreigners, but fellowcitizens with the saints, and of the household of God; 20 And are built upon the foundation of the apostles and prophets, Jesus Christ himself being the chief corner [stone]; 21 In whom all the building fitly framed together groweth unto an holy temple in the Lord: 22 In whom ye also are builded together for an habitation of God through the Spirit."
Ephesians 4:10-14 KJV
"10 He that descended is the same also that ascended up far above all heavens, that he might fill all things.) 11 And he gave some, apostles; and some, prophets; and some, evangelists; and some, pastors and teachers; 12 For the perfecting of the saints, for the work of the ministry, for the edifying of the body of Christ: 13 Till we all come in the unity of the faith, and of the knowledge of the Son of God, unto a perfect man, unto the measure of the stature of the fulness of Christ: 14 That we [henceforth] be no more children, tossed to and fro, and carried about with every wind of doctrine, by the sleight of men, [and] cunning craftiness, whereby they lie in wait to deceive;"
This issue runs far and deep, for when there is Not The Order Of Jesus, The Father, The Spirit, then Men and Satan will bring forth Illusions Of Greatness!!!
8) The issue of hypocrisy -- Many people see Christians as hypocrites because they often fail to live up to the standards that they preach. This hypocrisy makes it difficult for Christians to share their faith.
Once again, this is a Two Edge Sword. For we know that while we live on this Earth that Perfections Eludes us, for WE say no one is Perfect, but yet The Father says that we are to BE Perfect as He Is, so then, herein lies a problem, not with God, but with Man. When we do not Weigh Our Lives to God’s Standards, then Perfection can never be achieved. Man and Satan take advantage of this and will use every excuse under Heaven Not To Be Perfect. The other part of the Edge Of The Sword is this, that too many Claim Jesus as Savior, but not as Lord. Yes, they may say that Jesus is their Lord and Savior, but unless there are Changes from Ungodliness to Godliness, then Jesus cannot be Lord. Yes we are Save By Grace and that not of ourselves, but Jesus says that He took care of the Spiritually end of Sin making Him Savior, but to Prove that Jesus is Lord, we must deal with the Mind, Soul and Flesh. Many are Taught, even have Doctrine, saying all we have to do to be Saved, to Enter The Kingdom Of Heaven is to Confess With Our Mouths that Jesus is Lord and Savior. Though you can find a few Scriptures to back this, we are to Live By The Whole, Entire Scriptures.
Deuteronomy 18:13 KJV
“Thou shalt be perfect with the LORD thy God."
Leviticus 20:7 KJV
“Sanctify yourselves therefore, and be ye holy: for I [am] the LORD your God."
Matthew 5:48 KJV
“Be ye therefore perfect, even as your Father which is in heaven is perfect."
1 Peter 1:15 KJV
“But as he which hath called you is holy, so be ye holy in all manner of conversation;"
Another issue with this, is that the church (Denominations), teach you History instead of How To Live Godly. Most do it out of Fear Of Not Being Accepted so they are always trying to Prove They Are Right. In all of the churches that I have visited, NOT One Taught, How To Live, How To Make Jesus Lord Over My Life, NOT ONE!!!
9) The issue of intolerance -- Some Christians are intolerant of people who have different beliefs. This intolerance is making it difficult for Christians to build relationships with people who are not Christian.
Here’s the answer, WE THE Church (NO Denomination), are to be INTOLERANT of People who do not Serve The Jesus that Saved Us From Sin. Too many take “Love Your Neighbor” and have Morphed it into a Worldly Love, to be Acceptable Of All Men and Women NO Matter Who Is THEIR MASTER. I do Not Accept those who go Against The Word, Against The Holy Spirit, I do Not Tolerate Them, but tell them The Truth In Love, making it Their Choice to Accept Jesus or not. Then, for the most part, WALK Away, knowing they are My Enemy, they are Jesus Enemy!!! Didn’t Jesus tell the First Apostles likewise, that if the Gospel was Not Accepted, then to Leave and to shake the very dust from their feet, that Judgment would be more Tolerable for Sodom and Gomorrha then for them…are we not to be likewise?
Matthew 10:11-15 KJV
"11 And into whatsoever city or town ye shall enter, enquire who in it is worthy; and there abide till ye go thence. 12 And when ye come into an house, salute it. 13 And if the house be worthy, let your peace come upon it: but if it be not worthy, let your peace return to you. 14 And whosoever shall not receive you, nor hear your words, when ye depart out of that house or city, shake off the dust of your feet. 15 Verily I say unto you, It shall be more tolerable for the land of Sodom and Gomorrha in the day of judgment, than for that city."
The meaning of Intolerance today is Man Made, is The Will Of Satan, not Jesus, not The Father, not The Holy Spirit!
10) The issue of judgmentalism -- Some Christians judge people who do not live up to their standards. This judgment makes it difficult for people to feel welcome in the church.
We, The Church, are to Judge All Things, even All People. Too many of you Stand on this, “Judge not and you will not be Judged…”, but I tell you who do so, are Judged already. For the rest of that Scripture tells us to get Our Own Act Together before You Judge anyone else and here is where the False Teaching begins. We go back to the Hypocrisy, Not Living According To God’s Holy Word. The Scriptures tells us that we are to Judge that which is Right or Wrong, else why would there be God’s Word anyway? Also, why would Scripture’s tell us the Order Of Judgment Within The Church, if we are not to Judge? I will only give one set of Scriptures for this, you need to Study The Word to find the rest.
Matthew 7:1-5 KJV
"1 Judge not, that ye be not judged. 2 For with what judgment ye judge, ye shall be judged: and with what measure ye mete, it shall be measured to you again. 3 And why beholdest thou the mote that is in thy brother's eye, but considerest not the beam that is in thine own eye? 4 Or how wilt thou say to thy brother, Let me pull out the mote out of thine eye; and, behold, a beam [is] in thine own eye? 5 Thou hypocrite, first cast out the beam out of thine own eye; and then shalt thou see clearly to cast out the mote out of thy brother's eye."
11) The issue of legalism -- Some Christians are legalistic, meaning they are focused on following rules and regulations rather than having a relationship with God. This legalism makes it difficult for people to experience the joy of the Christian life.
We, The Blood Bought, are to Follow Jesus Word To The Letter which means, we have to Follow Rules. In Following The Rules that Jesus has set and demands, within Following The Rules, we find Peace, we find Joy, we find Love that The World cannot have, nor can they truly experience it. In Order to Call Jesus Lord, not Savior, we MUST Follow His Rules!
Luke 6:46 KJV
“And why call ye me, Lord, Lord, and do not the things which I say?"
John 14:15 KJV
“If ye love me, keep my commandments."
12) The issue of materialism -- Some Christians have become materialistic, meaning they are more focused on material possessions than their relationship with God. This materialism makes it difficult for Christians to live a simple and humble life.
First off, Living The Life that Jesus Requires is Not Easy, in some cases it is very difficult, but, in doing so, it is a Humbling Experience. The World teaches Materialism, The Scriptures teaches Against Materialism. With that being said, that does not mean that a Blood Bought cannot have Riches, have Materials Of Comfort, but it is The Heart That Matters! Jesus said that Where Our Hearts Are, that Is Where Our Treasure Is. So then, if one is Focused on Worldly Possessions and not Focused on Heavenly Things, then this in it’s self is a Sin, making Jesus Not Lord Over Their Lives!!!
Matthew 6:21 KJV
“For where your treasure is, there will your heart be also."
Luke 12:21 KJV
“So [is] he that layeth up treasure for himself, and is not rich toward God."
We should be able to Lose everything in this World, knowing that we have Jesus, but if you Lose Jesus, then you have nothing!!!
These two messages are to Wake Up The Body Of Christ, The Blood Bought, The Church in seeing that these Denominations that call themselves The Church, are really Ministers Of Satan in disguise, manipulating you in a False Doctrine, keeping us Divided, keeping us from being The True Church that Jesus Died For.
There is only One Word, there is only One Jesus, there is only One Holy Spirit and All Three Agree with No Division Among Themselves, so, there cannot be Thousands of Churches, Thousands of Doctrine, Thousands of The Holy Spirit speaking different things, but only that in which Man and Satan has devised!
Repent!!!
Hebrews 5:12 KJV
“For when for the time ye ought to be teachers, ye have need that one teach you again which [be] the first principles of the oracles of God; and are become such as have need of milk, and not of strong meat."
Repent!!!
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
How important is forgiveness? After reading what Jesus had to say about it, it should be a priority in every Christian's life. Also what part of the Lord's Prayer may have Jesus considered as the most important part? Click on the link below for the answers to these important questions. #BibleStudy #Devotions #Evangelism #Matthew #sin
Do you want to understand God’s activity in your life? See how the book of Ruth shows God at work behind the scenes with nothing obviously supernatural.
https://grace.allpurposeguru.com/2023/10/gods-activity-how-is-it-hidden-in-the-book-of-ruth/
Working with thick wood can be a challenging task, especially if you’re not equipped with the right tools and knowledge. One of the most versatile power tools for cutting thick wood is the circular saw. This handheld saw, with its circular blade, can make quick work of even the densest wood materials. In this comprehensive guide, we’ll take you through the step-by-step process of cutting thick wood with a circular saw. Whether you’re a seasoned woodworker or a DIY enthusiast, by the end of this article, you’ll have the confidence and expertise to tackle thick wood projects with ease and precision.
https://bsptools.com/wp-content/uploads/2023/10/图片5-350x232.png 350w, https://bsptools.com/wp-content/uploads/2023/10/图片5-1024x679.png 1024w, https://bsptools.com/wp-content/uploads/2023/10/图片5-165x109.png 165w, https://bsptools.com/wp-content/uploads/2023/10/图片5-768x509.png 768w, https://bsptools.com/wp-content/uploads/2023/10/图片5-24x16.png 24w, https://bsptools.com/wp-content/uploads/2023/10/图片5-36x24.png 36w, https://bsptools.com/wp-content/uploads/2023/10/图片5-48x32.png 48w" alt="wood saw blade" width="950" height="629" />
Before we delve into the specifics of cutting thick wood with a circular saw, it’s crucial to emphasize the importance of safety. Circular saws are powerful tools that demand respect and caution. Here are some safety guidelines to follow:
Now that we’ve covered the essentials of safety, let’s move on to the step-by-step process of cutting thick wood with a circular saw.
Step 1: Choose the Right Saw Blade
https://bsptools.com/wp-content/uploads/2023/10/图片6-350x233.png 350w, https://bsptools.com/wp-content/uploads/2023/10/图片6-165x110.png 165w, https://bsptools.com/wp-content/uploads/2023/10/图片6-24x16.png 24w, https://bsptools.com/wp-content/uploads/2023/10/图片6-36x24.png 36w, https://bsptools.com/wp-content/uploads/2023/10/图片6-48x32.png 48w" alt="wood saw blade" width="950" height="633" />
Circular saw blades come in various sizes, typically ranging from 6-1/2 inches to 7-1/4 inches in diameter. The size of the blade should match the saw’s capacity. Larger blades are capable of deeper cuts, which can be advantageous when dealing with thick wood.
For specific tasks, there are specialized blades available, such as dado blades for creating grooves, crosscut blades for making precise cuts across the wood grain, and rip blades for cutting parallel to the grain. Select the blade that best suits your project’s requirements.
Step 2: Measure and Mark
Before you make a cut, measure the length you want precisely and mark it with a straight edge, square, or measuring tape. Using a pencil, draw a clear and visible line on the wood. This line will act as your cutting guide and help ensure the cut is straight and accurate.
Step 3: Adjust the Blade Depth
Set the depth of the circular saw blade. The blade should extend approximately 1/8 inch below the thickness of the wood you’re cutting. This depth ensures that the blade will cut through the wood while minimizing the risk of the blade cutting into the work surface below.
Step 4: Position the Saw
Place the circular saw on the edge of the wood, aligning the blade with the cutting line you marked. Ensure that the base plate of the saw is resting flat on the wood’s surface. Before you start the saw, hold it firmly with both hands, with your dominant hand on the handle and your non-dominant hand on the auxiliary handle.
Step 5: Start the Saw
Press the safety trigger and then the power trigger to start the saw. Allow the blade to reach full speed before making contact with the wood. This helps prevent splintering and ensures a smoother cut.
Step 6: Make the Cut
With the saw running at full speed, carefully push the blade into the wood along the marked cutting line. Use a steady, even pressure to move the saw forward. Keep both hands firmly on the saw’s handles and maintain a stable stance.
Step 7: Guide the Cut
To achieve the straightest cut possible, keep the circular saw aligned with the marked cutting line. Pay attention to the front and rear marks on the base plate, as they help you maintain the correct line. Continue pushing the saw through the wood at a consistent speed until the cut is complete.
Step 8: Support the Wood
If you’re cutting a long piece of thick wood, it’s essential to have a support system in place. Placing additional sawhorses or a workbench at the ends of the wood can help prevent it from sagging or binding during the cut.
Step 9: Stay Safe
Throughout the cutting process, maintain focus and ensure that your hands, clothing, and body are clear of the blade’s path. Keep your fingers away from the blade, and be cautious of kickback, which can occur if the saw binds or encounters an obstacle. To prevent kickback, stand to the side of the blade and maintain a firm grip on the saw.
Step 10: Finish the Cut
As you near the end of the cut, be mindful of the off-cut piece. To prevent it from falling or pinching the blade, use a scrap piece of wood as a sacrificial backing. This keeps the wood piece stable and reduces the risk of splintering.
Step 11: Turn Off the Saw
Once the cut is complete, release the power trigger to turn off the saw. Allow the blade to come to a complete stop before setting it down or making any adjustments.
Cutting thick wood with a circular saw can seem intimidating, but with the right equipment and the proper technique, it becomes a manageable and even enjoyable task. Safety should always be your top priority, and a few simple precautions can ensure your well-being throughout the process.
In summary, selecting the right saw blade, measuring and marking the wood accurately, adjusting the blade depth, and guiding the saw along the cut line are fundamental steps to follow. Supporting the wood, staying vigilant, and finishing the cut safely are equally important.
With practice and experience, you’ll gain confidence in your ability to tackle thick wood projects with precision and ease, creating beautiful and functional pieces that showcase your woodworking skills. So, go ahead and pick up that circular saw – it’s time to start cutting through thick wood like a pro!
Sanding belts are indispensable tools for woodworkers and DIY enthusiasts. They make smoothing and shaping wood a breeze, but their effectiveness can be severely hampered when they become clogged with sawdust, resin, or other debris. A clogged sanding belt not only reduces efficiency but also shortens the belt’s lifespan. Fortunately, cleaning a clogged sanding belt is a straightforward process that can save you money and ensure your projects turn out as smooth as you desire. In this article, we will discuss the importance of keeping your sanding belt clean and provide practical steps to clean it effectively.
A clean sanding belt operates at peak efficiency, allowing you to complete your woodworking tasks faster and with better results. A clogged belt will not remove material as effectively, leaving you with uneven surfaces and more work to do.
Sanding belts can be expensive, and frequent replacements can add up quickly. By cleaning your belts regularly, you can extend their lifespan and reduce the need for replacements.
Cleaning a clogged sanding belt costs nothing but a little time, saving you money on purchasing new belts more frequently.
A clean sanding belt reduces the likelihood of overheating and friction-related accidents, protecting both your workpiece and yourself.
Now that we understand the importance of cleaning sanding belts, let’s dive into the techniques for keeping them in top condition. Before you begin cleaning your clogged sanding belt, gather the following tools and materials:
Start by putting on safety goggles and a dust mask to protect your eyes and respiratory system from any debris that may become dislodged during the cleaning process.
If your sanding belt is still attached to the sander, unplug or turn it off before proceeding. Carefully remove the sanding belt from the sander and lay it on a flat, clean surface. Make sure it is completely cool if it was recently used.
Begin by using a stiff brush to gently scrub the surface of the sanding belt. Brush along the direction of the belt to loosen the clogged material. Be gentle to avoid damaging the abrasive surface of the belt.
https://binicabrasive.com/wp-content/uploads/2023/10/图片6-1.png 400w" alt="SANDING BELT" width="267" height="400" data-fr-image-pasted="true" />If the stiff brush doesn’t remove all the debris, use a soft wire brush or a specialized cleaning stick designed for sanding belts. Run the brush or stick along the abrasive surface in the direction of the belt’s rotation. This should dislodge more stubborn particles.
To remove the loosened debris, use compressed air or a vacuum cleaner with a small nozzle attachment. Hold the sanding belt securely and maintain tension to prevent it from folding or wrinkling during this process. Blow air or use the vacuum nozzle to remove the particles, moving along the entire length of the belt.
Depending on the extent of clogging, you may need to repeat steps 3 to 5 several times until the sanding belt is clean and the abrasive surface is visible and free of debris.
After cleaning, carefully inspect the sanding belt for any remaining clogs or damage. If you find any stubborn residue, consider using a cleaning solvent that is appropriate for your sanding belt material. Apply the solvent sparingly to a clean cloth and gently rub the affected area.
If you used a cleaning solvent, allow the sanding belt to dry completely before reinstalling it. This is important to prevent any potential chemical reactions or combustion when the belt is in use.
Once the sanding belt is clean, dry, and free of any residual solvents, reattach it to your sander according to the manufacturer’s instructions. Ensure that it is properly tensioned.
Before resuming your sanding project, run the sander with the cleaned belt for a few minutes to make sure it’s operating smoothly and effectively.
A clean sanding belt is essential for optimal woodworking results. Regularly cleaning your sanding belts not only saves you money by prolonging their lifespan but also ensures the safety of your projects and your health. By following the step-by-step guide outlined in this article, you can easily clean your clogged sanding belt and maintain its efficiency. Remember to prioritize safety by wearing appropriate protective gear and handling cleaning solvents with care if necessary. With a clean sanding belt, you’ll be well on your way to achieving smoother, more professional-looking woodworking projects.
The Lord wants everyone to come to Him. Therefore, the Apostle Paul told us everyone can experience the glory of God. We must get rid of the veil. What exactly is the veil, where did it come from, and why do we have one? Click on the link below for the answers. #2Corinthians #BibleStudy #Devotions #Evangelism
Greetings in The Mighty Name of Jesus, The Christ!!!
Christians In Chaos - pt1
(this will be a Two Part Message)
Matthew 5:13 KJV
"Ye are the salt of the earth: but if the salt have lost his savour, wherewith shall it be salted? it is thenceforth good for nothing, but to be cast out, and to be trodden under foot of men."
James 3:12 KJV
"Can the fig tree, my brethren, bear olive berries? either a vine, figs? so [can] no fountain both yield salt water and fresh."
Brothers and Sisters, Jesus said that We Are The Salt of The Earth, do you even know what that means? Jesus, Our Savior and Lord, said that if the Salt is not doing what is supposed to do, then it is worthless…We are becoming Worthless.
Many of you think in ways that are Not Godly, are Not God’s Ways, believing that you by mere Grace are The Salt, when in fact, according to Scripture, you are not. Salt in its definition has eight important uses. It Flavors Foods, Binds Foods, Stabilizes Foods, Prevents Bacteria, Affects Our Nerves, Contracts and Relaxes Muscles, Balances Water and Minerals.
So, if we, who are the Blood Bought by Jesus as Savior, then we Become the Salt of the World, making Jesus Lord over Our Lives. We as a Body are to be and do all of the Definition above says and if we do not, then We, The Blood Bought, The Christian, The Saved By Grace are becoming Worthless. We, Brothers and Sisters are to bring Jesus Alive in us and through us by Our Walking In Obedience, both by The Word and The Holy Spirit, in which you do not!!!
I want to present to you Twelve Issues that The World and even Christians have. These were given by an author, on line, for a large audience, that we will not mention any names, but only present the issues addressed.
1) The rise of secularism – Secularism is the belief that religion should not play a role in public life. This belief is becoming increasingly popular, challenging Christianity’s traditional societal role.
This is a double edge sword, one we are not to Conform to the Worlds Ways and two we are to Lead the World to God’s Ways. Scriptures tells us both…
1 John 2:15 KJV
“Love not the world, neither the things [that are] in the world. If any man love the world, the love of the Father is not in him."
Matthew 5:14 KJV
“Ye are the light of the world. A city that is set on an hill cannot be hid."
Matthew 28:20 KJV
“Teaching them to observe all things whatsoever I have commanded you: and, lo, I am with you alway, [even] unto the end of the world. Amen."
The World also see’s those who call themselves a Christian as Liars, Hypocrites, Deceivers, Manipulators because you have Spoken one thing but do just the Opposite. We say that Jesus is Just and Holy, but WE have dragged His Name through the Secular World, being as the Secular World, but Speaking Against the Secular World…are you confused yet?... so is the World!
2) The decline of church attendance -- Church attendance has been declining for decades, and this trend is continuing. This decline is making it more difficult for Christians to connect with each other and build a strong community.
Because of the First Issue, this second one follows. If we Appear to be in Chaos, then the natural order of things instilled in us, is to, Run, Disconnect, Expel, Avoid a group of people who in themselves present Chaos, Disorder. Because we are not as we say that we should be, many are fleeing the church, because The Church practices Not what it preaches and The Church has allowed too much of The World to be it’s Master!
Did Jesus Our Lord not say that BY Our Love for One Another that The World would know that we Belong, are Blood Bought, are Christians, to Jesus? The Love in which Jesus speaks of here is not to Love The World, but it is the Love and Fellowship that we, the Blood Bought, can only have while Living In His Presence.
John 13:34-35 KJV
"34 A new commandment I give unto you, That ye love one another; as I have loved you, that ye also love one another. 35 By this shall all [men] know that ye are my disciples, if ye have love one to another."
3) The rise of other religions -- Christianity is no longer the dominant religion in the world. Other religions, such as Islam and Hinduism, are growing in popularity. This rise of other religions is challenging Christianity’s position in the world.
We, Brothers and Sisters are to be The Head not The Tail! Other Religions are Rising up because they Live closer to Their Truth then we do. We, Brothers and Sisters, rather you like it or not, Walk more in Disobedience to what we say and what we believe in and The World KNOWS IT!! We are to be the Example, but we are not. We, instead, are Divided because of Satan and Man and The Church is okay with that!!! NO God Forbid!!!!!. Scripture tells us that We, The Blood Bought have the Only Truth there is and We, Brothers and Sisters have presented the Truth into a Lie!!!
Ephesians 4:3-6 KJV
"3 Endeavouring to keep the unity of the Spirit in the bond of peace. 4 [There is] one body, and one Spirit, even as ye are called in one hope of your calling; 5 One Lord, one faith, one baptism, 6 One God and Father of all, who [is] above all, and through all, and in you all."
How many of you when Defending Your Religion, Your Denomination, say this… “We Believe…”? This is the Beginning of a Lie that has turned many away to seek God through other means. It does not matter What I Believe, because Jesus, whom I Serve, was Bought By His Blood, has the Only True Belief, He, Jesus Obeyed The Father even unto Death, has the Last Word! Too many of you are Looking for The Truth, but in finding it, you Feel Unconformable, Feel Offended, Does not Fit Your Life Style and turn to those whom are False in their Callings, who have Manipulated The Word to Fit You and The World around You!!!
2 Timothy 4:3 KJV
“For the time will come when they will not endure sound doctrine; but after their own lusts shall they heap to themselves teachers, having itching ears;"
Wake up Church!!! There are not many, many, many Sound Doctrines, there is ONLY ONE Sound Doctrine and that is the Doctrine Of Jesus and Him alone!! There are Not many, many, many different Translations To Jesus, but only one, that is Obedience To His Word and The Holy Spirit.
John 14:15 KJV
“If ye love me, keep my commandments."
4) The problem of evil and suffering -- One of the most challenging questions in Christianity is how to reconcile the existence of a loving God with the existence of evil and suffering. This question is incredibly challenging in the face of atrocities such as the Holocaust and the Rwandan genocide.
This is a Problem within The Church, because The Church does not Know Jesus, The Father and Holy Spirit as they should. Most of you Think that the God that we serve is Only a Loving God that can do no Evil in our understanding, no Wrong by our understanding and that anything outside of a Loving Nature cannot be whom You Serve. Wake UP!!!
First things first, God is a very Loving God, whom Loves His Creation even unto death. But the thing that most people either do not know or do not understand or were never taught correctly, is that WE, Mankind, have a Free Will that The Father, Jesus and Holy Spirit will not go against. That is for both The Believer and Non-Believer, we are equal in that sense.
Secondly Jesus will do whatever will bring Him Glory, that He will Present To The Father one day. This means that if Jesus wants to remove someone, Jesus wants to Save everyone, but not the Disobedient! We as Human beings think we Know all of the answers, but we are not even close to what the Truth is. In the Old Testament The Father was going to Genocide a people, but do you Know or Understand why? Most of you do not, nor can you accept that the Jesus You Accepted could do or allow such things. The Reason The Father was going to do so, was that these people were Evil in His Sight and that Their Evil would Infect His People, making them go astray. In the New Testament Ananias and Sapphira died, for Lieing. A Prophet in the Old Testament died because of Disobedience to what The Father told him, that he went with another, when told not to.
UNDERSTAND THIS!!!! Jesus, who only did and only obeyed The Father, is the same since the Beginning Of Time itself! Jesus, looks at Evil much differently than we claim to understand or accept.
Hebrews 13:8 KJV
“Jesus Christ the same yesterday, and to day, and for ever."
John 5:19 KJV
“Then answered Jesus and said unto them, Verily, verily, I say unto you, The Son can do nothing of himself, but what he seeth the Father do: for what things soever he doeth, these also doeth the Son likewise."
Isaiah 55:8 KJV
“For my thoughts [are] not your thoughts, neither [are] your ways my ways, saith the LORD."
Also Understand this, that the Understanding of Evil that we have, is Man or Satan Made, not from Jesus. Because of Our Free Will, Jesus allows us to do or say whatever we desire, but when all is said and done, Jesus has the Last Say!!!
5) The issue of homosexuality -- The issue of homosexuality is one of the most divisive issues in Christianity. Some Christians believe homosexuality is a sin, while others believe it is acceptable. This division makes it difficult for Christians to present a united front.
Look Church, what this says, it says WE THE CHURCH, The Bride OF Christ, are Divided!!! How can this be!!!!! It is again because of the Free Will Of Man and Not The Will Of Jesus. The Scriptures are very clear on Homosexual activity from the Old Testament to the New Testament, only Man and Satan wants to Change what The Father has Ordained since the beginning.
There are more then what is stated below.
Leviticus 18:22-23 KJV
"22 Thou shalt not lie with mankind, as with womankind: it [is] abomination. 23 Neither shalt thou lie with any beast to defile thyself therewith: neither shall any woman stand before a beast to lie down thereto: it [is] confusion."
Leviticus 20:13 KJV
“If a man also lie with mankind, as he lieth with a woman, both of them have committed an abomination: they shall surely be put to death; their blood [shall be] upon them."
Romans 1:26-27 KJV
"26 For this cause God gave them up unto vile affections: for even their women did change the natural use into that which is against nature: 27 And likewise also the men, leaving the natural use of the woman, burned in their lust one toward another; men with men working that which is unseemly, and receiving in themselves that recompence of their error which was meet."
It is very clear, that The Father, Jesus and The Holy Spirit do not Accept Homosexuality of any kind, it is an Abomination to them!!!
6) The issue of women’s roles in the church -- The issue of women’s roles in the church is another divisive issue. Some Christians believe that women should play a more traditional role in the church, while others believe women should have equal opportunities to lead and teach. This division makes it difficult for Christians to present a united front.
This should not be an issue, but, we know it is an issue that Man and Satan have used to Divide The Church. We must consider all of the Scriptures, both Old Testament and New Testament to get what The Fathers Will is. In the Old Testament we need to Understand the First Thing, The Father Created Man, NOT Woman, in His Image. We must also consider that when The Father Counted how many people there were, He only counted the Males, not the females. We must also consider that when The Father sent His People to fight, it was Only The Men that went forth in battle.
Now, we must also consider the Females that played a role in the Old Testament, like Ruth, Ester and others. They were given, for an appointed time, Authority and Power over both Men and Women, but you must understand why. In the era’s of these woman, there was not a Man Walking as they should, but there were Women who did. The Father Used them for His Measure Of Time, until a Man would do as The Father wanted. During this time, Man was still The Father’s preferred choice, but had to use women during these times of Disobedience.
In the New Testament, there are Three sets of Scripture that make it very clear about Women and in Leadership, but I will say this also, that Jesus only choose Men as His Disciples in the beginning and it is Jesus who set The Offices of Apostle, Prophet, Evangelist, Pastor and Teacher, not Man, Satan or Women.
1 Timothy 2:10-13 KJV
"10 But (which becometh women professing godliness) with good works. 11 Let the woman learn in silence with all subjection. 12 But I suffer not a woman to teach, nor to usurp authority over the man, but to be in silence. 13 For Adam was first formed, then Eve."
1 Corinthians 11:3 KJV
“But I would have you know, that the head of every man is Christ; and the head of the woman [is] the man; and the head of Christ [is] God."
Ephesians 5:22 KJV
“Wives, submit yourselves unto your own husbands, as unto the Lord."
Even though I have only given a few Scriptures to show the place of a Woman, the whole Bible is subject of Man being in a position of Authority and not Women for the most part. By just the few I have mentioned, they clearly show that Man, as God has chosen, is the Head Over The Women and that Women are not to have Authority Over Man. I know in our Society this is not always so, but you need to understand that this is a work of Satan since he deceived Eve.
For these reasons, Women should not have a Place Of Authority within The Church, except in the teaching of younger children and that having a Man Of Authority over her. I know many of you take issue with this, but, are you going to argue with Scripture, with Jesus? There are many more reasons that are not mentioned to this issue that would take a whole other message alone on this subject.
I will conclude at this point. Next week I will give you the Second half of these important issues that we face as The Church that Jesus Bought!
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
For anglers who value portability and packability, a telescopic fishing rod is a must-have. When collapsed, they are significantly shorter than one-piece rods, making transport and storage easy. But don't let their compact size fool you. Quality telescopic rods offer the same performance and durability as their one-piece counterparts.
Choosing the right telescopic rod ensures you have the perfect gear for any UK fishing scenario. This complete guide will teach you how to pick the best telescopic fishing rod for your needs.
Your fishing style, target species, and local waters will determine the ideal telescopic rod for you. Here are the key factors to consider:
Telescopic rods range from about 5 to 10 feet when fully extended. Shorter rods in the 5-7 feet range offer better casting accuracy and control for fishing in tight spots. Longer telescopic rods provide more casting distance and leverage against bigger fish.
Rod power refers to the strength of the blank and its ability to handle the strain of fighting fish. Ultralight and light power rods are best suited to catching small species like trout and panfish. Medium and medium-heavy rods can handle bigger fish like bass, walleye, and pike. Heavy power rods are designed for large saltwater species.
The action describes where the rod blank bends when pressure is applied. Slow action rods bend toward the grip, providing more shock absorption. Fast action rods bend near the tip, allowing better lure control and hook sets. Moderate or medium action rods offer a balance of flexibility and responsiveness.
Graphite, fiberglass, and carbon fiber composites are commonly used for telescopic rod blanks. Graphite is lightweight yet sensitive. Fiberglass is heavier but more durable. Carbon fiber blends are strong, sensitive, and lightweight.
Quality guide rings with stainless steel frames or ceramic inserts minimize friction on the fishing line. More guides positioned along the blank provide better overall rod performance.
The locking sections on telescopic rods should re-engage securely and hold tight under pressure. Models with external locking bands or internal mechanisms that click into place when extended tend to be more reliable.
Cork and EVA foam are common handle materials that provide comfort and grip. Longer handles offer more leverage with two-handed casting techniques. Recessed reel seats streamline the rod profile when collapsed.
Quality telescopic rods maintain straight blank alignment and have smooth section transitions when extended. Always test the action before purchasing by bending the rod to ensure there are no weak points between sections.
Strong telescopic rods matched to your target species give you an effective saltwater fishing setup. Here are best telescopic fishing rod UK:
This heavy power fast action rod can battle big fish like sharks, tuna, and marlin offshore. The durable blank is a blend of graphite and fiberglass, with aluminum oxide guides and a comfortable cork grip. Extends to 7 feet with smooth transitions between sections.
A tough fiberglass blank makes this medium-heavy telescopic rod ideal for chasing hard-fighting species like cod, sea bass, mackerel, and pollack from shore. It features a comfortable cork handle and durable steel hooded reel seat. Extends to 5.5 feet.
Designed for long distance surf fishing, the Better Leader Saltwater Telescopic Fishing Rod has a powerful fast action blank extending to 10 feet. The high-density carbon composite construction helps reduce fatigue when beachcasting repetitively. Large line guides enhance casting distance capabilities.The corrosion-resistant design handles the harsh saltwater environment with ease. Anglers appreciate the telescopic portability when moving between coastal fishing spots. Priced affordably between £30-£50, the Better Leader offers exceptional performance and durability. Its versatility and sensitivity makes it a popular choice among UK anglers seeking a reliable rod for their saltwater fishing adventures.
Perfect for shore-based fishing, this 8 foot rod handles sea bass, wrasse, and pollack effectively with medium-heavy power and a responsive fast action. The rugged fiberglass and carbon fiber construction is corrosion resistant for use in saltwater.
Follow these tips from the experts when fishing with your telescopic rod:
With so many great options, selecting the ideal telescopic rod just takes matching key performance factors to your fishing needs and preferences. Seek out rods offering reliable performance, durability, and smooth easy extension. Investing in a quality telescopic rod will reward you with years of stellar fishing that's easy to take anywhere.
Citizenship carries a lot of weight, especially if it means going to heaven or not. The Apostle Paul knew the importance his citizenship in heaven, do you? In today's post I have included a simple presentation of the gospel called "The Roman Road." Click on the link below to access it. #Acts #BibleStudy #Devotions #Evangelism
Construction has come a long way from its primitive origins, with modern technology continuously shaping and enhancing the industry. One such technological marvel is core drilling, which has played a pivotal role in transforming how structures are built. Core drilling, also known as concrete coring, is a specialized technique used to create precise holes in various construction materials, such as concrete, asphalt, and masonry. This article will delve into the various applications and benefits of core drilling in the construction industry, shedding light on its importance and versatility.
https://bsptools.com/wp-content/uploads/2023/10/图片8-350x233.png 350w, https://bsptools.com/wp-content/uploads/2023/10/图片8-165x110.png 165w, https://bsptools.com/wp-content/uploads/2023/10/图片8-24x16.png 24w, https://bsptools.com/wp-content/uploads/2023/10/图片8-36x24.png 36w, https://bsptools.com/wp-content/uploads/2023/10/图片8-48x32.png 48w" alt="CORE DRILL BIT" width="950" height="633" />
Core drilling is a process that involves removing a cylindrical core or sample from a solid material, often referred to as a “core sample.” This is achieved through a specially designed machine known as a core drill or coring rig, which utilizes a diamond-tipped core bit to cut through the material. The cylindrical core that is extracted is a valuable specimen used for testing and analysis, such as determining material strength, composition, and quality.
Core drilling equipment consists of several essential components, each contributing to the efficiency and precision of the process:
Core drilling techniques vary depending on the material being worked on. Here are some common methods used in construction:
Core drilling is a versatile technique that plays a crucial role in various aspects of construction. Its applications are wide-ranging and include:
One of the primary uses of core drilling in construction is creating service openings. This involves drilling precise holes through walls, floors, or ceilings to accommodate utilities like plumbing, electrical wiring, HVAC ducts, and communication cables. These openings are crucial for the installation and maintenance of building systems.
Core drilling is indispensable when it comes to anchoring heavy equipment or structures. It provides a way to create holes for anchors and fasteners that ensure the stability and safety of structural components. Whether it’s for mounting machinery or securing structural supports, core drilling ensures a reliable and durable solution.
Construction projects often require rigorous testing to assess the quality and integrity of the materials used. Core drilling allows for the extraction of core samples, which are subsequently subjected to laboratory testing. This ensures that construction materials meet the necessary standards and are suitable for their intended purpose.
In some cases, core drilling is employed to extract valuable materials. For example, in mining and quarrying operations, core drilling is used to recover samples of ore, minerals, or rock. These samples are then analyzed to determine their composition and quality.
Core drilling offers several advantages that make it an indispensable tool in the construction industry:
One of the standout features of core drilling is its ability to create precise and accurate holes. This level of precision is essential in construction, where even a minor deviation can have significant consequences. The use of specialized drill bits and robust drill stands ensures that holes are drilled exactly where they are needed.
Compared to other methods like jackhammering or saw cutting, core drilling generates minimal vibrations and noise. This is particularly advantageous when working in occupied buildings or urban environments where minimizing disruptions is crucial.
https://bsptools.com/wp-content/uploads/2023/10/图片7-350x233.png 350w, https://bsptools.com/wp-content/uploads/2023/10/图片7-165x110.png 165w, https://bsptools.com/wp-content/uploads/2023/10/图片7-24x16.png 24w, https://bsptools.com/wp-content/uploads/2023/10/图片7-36x24.png 36w, https://bsptools.com/wp-content/uploads/2023/10/图片7-48x32.png 48w" alt="CORE DRILL BIT" width="950" height="633" />
Core drilling is a relatively clean process, producing less dust and debris compared to other methods. The use of wet drilling further minimizes dust and airborne particles, contributing to a healthier and safer work environment.
Core drilling is adaptable to a wide range of materials, including concrete, brick, stone, asphalt, and more. This versatility ensures that it can be used in various construction applications, making it an essential tool for contractors.
Core drilling is a fast and efficient method of creating holes in construction materials. With the right equipment and experienced operators, it allows for the completion of projects in a timely manner, reducing construction timelines.
Traditional methods of creating openings in construction materials often result in significant material wastage. In contrast, core drilling minimizes wastage by extracting a core sample, which can be useful for additional testing or analysis.
While core drilling is a highly effective construction technique, it is essential to prioritize safety. Some safety considerations include:
Core drilling has revolutionized the construction industry by offering a versatile, precise, and efficient method of creating holes in a wide range of materials. Its applications are extensive, ranging from installing utility openings and anchors to structural testing and material extraction. The benefits of core drilling, including precision, reduced noise and vibration, minimal dust and debris, and versatility, make it an invaluable tool for modern construction.
As construction methods continue to evolve, core drilling will likely remain a cornerstone of the industry, helping to build safer, more efficient, and more resilient structures. With a commitment to safety and ongoing technological advancements, core drilling will play a pivotal role in shaping the future of construction.
Abrasives have been a crucial part of various industries, from woodworking to automotive and even in the realm of DIY projects. Sanding, in particular, is a common and essential process that can transform rough surfaces into smooth, polished ones. One of the key innovations in the sanding industry has been the introduction of Velcro sanding discs. These discs, with their ease of use and versatility, have revolutionized the way we approach sanding tasks. In this article, we will delve into the world of abrasive Velcro sanding discs, exploring the reasons behind their popularity and how they have become indispensable tools for professionals and hobbyists alike.
Sanding, in its simplest form, involves the removal of material from a surface through the abrasive action of a sandpaper or abrasive material. This process has a long history, dating back to ancient times when sand and primitive abrasive materials were used. The goal has always been to achieve a smoother and more refined surface, whether it’s wood, metal, or even plastic.
The traditional method of attaching sandpaper to a sanding block or machine involved adhesives or clips. While this method worked, it had its drawbacks. Adhesive-based sandpaper was prone to peeling, tearing, and could leave behind sticky residue. Clips were effective but not always easy to work with, especially when changing sandpaper frequently. This is where Velcro sanding discs came into play.
Ease of Use: Velcro sanding discs have gained immense popularity due to their user-friendly design. Their hook-and-loop system eliminates the need for adhesives or complicated clips, making it incredibly easy to attach and remove sandpaper. This feature not only saves time but also reduces frustration, making sanding a more enjoyable process.
Abrasives, particularly Velcro sanding discs, have revolutionized the way we approach sanding tasks across various industries and DIY projects. The Velcro sanding disc’s ease of use, cost-efficiency, quick grit changes, dust extraction capabilities, and versatility across materials have made them a staple tool for professionals and hobbyists alike. Their ability to streamline the sanding process, reduce surface damage, and enhance the quality of finished products has made them an invaluable innovation in the world of abrasives. Whether you’re a professional craftsman or a weekend warrior, the adoption of Velcro sanding discs can significantly improve the quality and efficiency of your work.
Mounted points, also known as grinding points or abrasive points, are essential tools in various industrial and metalworking applications. They are small, versatile, and abrasive tools that can be mounted on a variety of machines, such as die grinders, straight grinders, and bench grinders. Selecting the right mounted point for your specific application is crucial to achieve efficient and high-quality results. In this article, we will discuss the factors to consider when choosing a mounted point and provide guidance on selecting the most suitable one for your needs.
Mounted points consist of abrasive grains, binders, and a shank. The abrasive grains can be made from various materials, including aluminum oxide, silicon carbide, and ceramic. These abrasive materials are embedded in a binder that holds them together and provides stability during grinding or finishing operations. The shank is typically made of steel and is used to attach the mounted point to a grinding machine.
Mounted points come in various shapes, sizes, and materials, making them suitable for a wide range of applications. They are commonly used for tasks such as deburring, shaping, grinding, and finishing metals, ceramics, plastics, and composites. Choosing the right mounted point is essential for achieving the desired surface finish and maintaining productivity.
Selecting the appropriate mounted point for your application involves considering several factors. Let’s explore these key factors in detail:
The type of material you are working on plays a significant role in determining the mounted point’s suitability. Different materials have varying hardness and abrasiveness, which necessitates using the right abrasive material and grit size. For example, aluminum oxide mounted points work well on ferrous metals, while silicon carbide is better suited for non-ferrous metals and non-metallic materials.
Consider the specific application you have in mind. Are you deburring, shaping, grinding, or finishing the material? Different applications may require mounted points with distinct shapes and abrasive characteristics. For instance, cylindrical and conical mounted points are commonly used for deburring and shaping, while spherical or bullet-shaped points are ideal for intricate or concave surfaces.
The speed of your grinding machine is a critical factor to consider. Different mounted points are designed to work optimally at various speeds. Using a mounted point at the wrong speed can lead to overheating and reduced tool life. Always check the mounted point manufacturer‘s recommendations for the maximum permissible speed of the mounted point and ensure it matches your machine’s capabilities.
Grit size refers to the size of the abrasive particles on the mounted point’s surface. It determines the aggressiveness of the tool. Smaller grit sizes are more aggressive and remove material quickly but may leave a rougher surface finish. Larger grit sizes provide a finer finish but remove material more slowly. The choice of grit size depends on the desired finish and the material being worked on.
The shape and size of the mounted point are essential considerations. The shape should match the contours of the workpiece, while the size should be appropriate for the task at hand. A smaller mounted point may be more maneuverable for intricate work, while a larger one might be more efficient for bulk material removal.
Consider the hardness of the material you are working on, as it can impact the wear and longevity of the mounted point. Softer materials can cause the abrasive grains to clog the mounted point, reducing its effectiveness. Conversely, harder materials can wear down the mounted point more quickly. It’s crucial to select a mounted point that strikes the right balance for the material’s hardness.
In some applications, using coolant or lubrication is necessary to maintain the performance and extend the life of the mounted point. The choice of coolant or lubricant depends on the material being worked on and the specific grinding conditions. Always follow the manufacturer’s recommendations for using coolants and lubricants to prevent overheating and improve the tool’s efficiency.
Safety should be a top priority when selecting a mounted point. Ensure that the mounted point and your grinding machine are compatible in terms of RPM and torque. Furthermore, use personal protective equipment, such as safety glasses and dust masks, to protect yourself from potential hazards during the grinding process.
Now that we have discussed the key factors to consider, let’s outline the steps to help you select the right mounted point for your application:
Selecting the right mounted point is crucial for achieving efficient and high-quality results in your grinding and finishing applications. Consider factors such as material type, application, grinding speed, grit size, shape and size, material hardness, coolant and lubrication requirements, and safety. By following the steps outlined in this article and consulting with experts when needed, you can ensure that you choose the most suitable mounted point for your specific application. Proper selection and usage of mounted points not only enhance productivity but also contribute to the longevity of your tools and the quality of your finished products.
Mounted points, also known as grinding points or abrasive points, are essential tools in various industrial and metalworking applications. They are small, versatile, and abrasive tools that can be mounted on a variety of machines, such as die grinders, straight grinders, and bench grinders. Selecting the right mounted point for your specific application is crucial to achieve efficient and high-quality results. In this article, we will discuss the factors to consider when choosing a mounted point and provide guidance on selecting the most suitable one for your needs.
Mounted points consist of abrasive grains, binders, and a shank. The abrasive grains can be made from various materials, including aluminum oxide, silicon carbide, and ceramic. These abrasive materials are embedded in a binder that holds them together and provides stability during grinding or finishing operations. The shank is typically made of steel and is used to attach the mounted point to a grinding machine.
Mounted points come in various shapes, sizes, and materials, making them suitable for a wide range of applications. They are commonly used for tasks such as deburring, shaping, grinding, and finishing metals, ceramics, plastics, and composites. Choosing the right mounted point is essential for achieving the desired surface finish and maintaining productivity.
Selecting the appropriate mounted point for your application involves considering several factors. Let's explore these key factors in detail:
The type of material you are working on plays a significant role in determining the mounted point's suitability. Different materials have varying hardness and abrasiveness, which necessitates using the right abrasive material and grit size. For example, aluminum oxide mounted points work well on ferrous metals, while silicon carbide is better suited for non-ferrous metals and non-metallic materials.
Consider the specific application you have in mind. Are you deburring, shaping, grinding, or finishing the material? Different applications may require mounted points with distinct shapes and abrasive characteristics. For instance, cylindrical and conical mounted points are commonly used for deburring and shaping, while spherical or bullet-shaped points are ideal for intricate or concave surfaces.
The speed of your grinding machine is a critical factor to consider. Different mounted points are designed to work optimally at various speeds. Using a mounted point at the wrong speed can lead to overheating and reduced tool life. Always check the mounted point manufacturer's recommendations for the maximum permissible speed of the mounted point and ensure it matches your machine's capabilities.
Grit size refers to the size of the abrasive particles on the mounted point's surface. It determines the aggressiveness of the tool. Smaller grit sizes are more aggressive and remove material quickly but may leave a rougher surface finish. Larger grit sizes provide a finer finish but remove material more slowly. The choice of grit size depends on the desired finish and the material being worked on.
The shape and size of the mounted point are essential considerations. The shape should match the contours of the workpiece, while the size should be appropriate for the task at hand. A smaller mounted point may be more maneuverable for intricate work, while a larger one might be more efficient for bulk material removal.
Consider the hardness of the material you are working on, as it can impact the wear and longevity of the mounted point. Softer materials can cause the abrasive grains to clog the mounted point, reducing its effectiveness. Conversely, harder materials can wear down the mounted point more quickly. It's crucial to select a mounted point that strikes the right balance for the material's hardness.
In some applications, using coolant or lubrication is necessary to maintain the performance and extend the life of the mounted point. The choice of coolant or lubricant depends on the material being worked on and the specific grinding conditions. Always follow the manufacturer's recommendations for using coolants and lubricants to prevent overheating and improve the tool's efficiency.
Safety should be a top priority when selecting a mounted point. Ensure that the mounted point and your grinding machine are compatible in terms of RPM and torque. Furthermore, use personal protective equipment, such as safety glasses and dust masks, to protect yourself from potential hazards during the grinding process.
Now that we have discussed the key factors to consider, let's outline the steps to help you select the right mounted point for your application:
Selecting the right mounted point is crucial for achieving efficient and high-quality results in your grinding and finishing applications. Consider factors such as material type, application, grinding speed, grit size, shape and size, material hardness, coolant and lubrication requirements, and safety. By following the steps outlined in this article and consulting with experts when needed, you can ensure that you choose the most suitable mounted point for your specific application. Proper selection and usage of mounted points not only enhance productivity but also contribute to the longevity of your tools and the quality of your finished products.
Another word for "wicked" is "ungodly." Many who want nothing to do with God try to capitalize on His nature of love. They are right, He is a loving God but He is also a God of justice. Click on the link below to read God handles the wicked and the godly. #BibleStudy #Devotions #Psalms #sin
Greetings in The Mighty Name of Jesus, The Christ!!!
The Righteousness Of Faith In Jesus
Brothers and Sisters are you Walking in Righteousness? Do you know the Righteousness of God, through Our Savior and Lord Jesus? For it is Not Weighed by the Flesh of Men, but by The Will Of The Father through Jesus His Son! For our Righteousness is twofold, one The Cleansing from Sin through The Blood Of Jesus, His Sacrifice for Our Sin, the other is Our Entirety here on Earth. Some of you ask, what is the Entirety? It is your Daily Walk In Obedience To Jesus AS Lord over Your Life IN All Things.
When Our Lord Jesus Called me and Anointed me, one of the parts of my Anointing was a Scale used for Righteousness of those things that are Right and Wrong. So, from that day forward and even before I knew, I have Weighed all things to that which is Right and Wrong, but it was not at the Scale of Man but of Jesus, through The Holy Spirit. So, the Question arises… What is The Righteousness Of Jesus In Faith? It comes down to one simple Scripture, but within that Scripture lies a depth most struggle with…that is…
John 14:15 KJV
“If ye love me, keep my commandments."
This one Commandment fulfills the Entire Word Of God. There is no other Scripture that Describes Our Walk any deeper. In this Scripture IS the Righteousness Of Faith In Jesus and IS the Righteousness Of Jesus In Faith.
In the Beatitudes (Matthew 5:3 – 11) describes the Hearts Of Believers IN Jesus, but in all there is one that is mentioned Twice, that is, The Righteous.
Matthew 5:6, 10 KJV
"6 Blessed [are] they which do hunger and thirst after righteousness: for they shall be filled. ... 10 Blessed [are] they which are persecuted for righteousness' sake: for theirs is the kingdom of heaven."
In these Two Scriptures we are held accountable. We should Think, Speak, Walk IN the Righteousness Of Jesus By Faith. In everyone, there should be a Scale that is in Continuous Motion from the time we awake until the time we sleep. We ARE to Weigh All Things according to The Word and The Holy Spirit, rather they be Right or Wrong according, again, ACCORDING to The Fathers Will, a life Lived through The Blood Of Jesus.
Matthew 7:21 KJV
“Not every one that saith unto me, Lord, Lord, shall enter into the kingdom of heaven; but he that doeth the will of my Father which is in heaven."
Brothers and Sisters you CANNOT say that Jesus is Lord, say that You Love Jesus and Not Live a Righteous Life. James said it very clear, in a roundabout way, saying that if you Have Faith but have nothing to show for it, is worthless! Just as our mortal bodies cannot Live without the Spirit, so Our Faith cannot be without Works Of Righteousness!
James 2:18, 20, 26 KJV
"18 Yea, a man may say, Thou hast faith, and I have works: shew me thy faith without thy works, and I will shew thee my faith by my works. ... 20 But wilt thou know, O vain man, that faith without works is dead? ... 26 For as the body without the spirit is dead, so faith without works is dead also."
These Works are Works Of Righteousness. We are to bear Witness to The World that Righteousness Of Jesus within and without us in All Things!
We, Brothers and Sisters, need to Weigh every single thing that touches Our Lives, that we make sure of The Righteousness of Jesus is being Lived. So again, What is The Righteousness Of Jesus…
Righteousness: a state of him who is as he ought to be, righteousness, the condition acceptable to God
according to doctrine concerning the way in which man may attain a state approved of God
integrity, virtue, purity of life, rightness, correctness of thinking feeling, and acting. This is the Definition of Righteousness.
How do we Obtain this Righteousness? First to those who Think themselves Righteous just at the Accepting Jesus As Savior, to you…there is More to the story then What you have been taught!
We must be Changed and it is OUR Responsibility to Desire Change and Act Upon Change. We must Understand that no matter What we think, that Our Way Of Think is Wrong, that God’s Ways are beyond our comprehension.
Isaiah 55:8-9 KJV
"8 For my thoughts [are] not your thoughts, neither [are] your ways my ways, saith the LORD. 9 For [as] the heavens are higher than the earth, so are my ways higher than your ways, and my thoughts than your thoughts."
So this means that EVERYTHING that I Know, whatever Knowledge or Wisdom or Understanding that I have needs to be Changed To God’s way of thinking. This is the First of the hardest things to do. Every one of us Thinks WE are Right and that WE Are Walking In Righteousness…but are you?
We must understand that once we Accept Jesus as Savior that does not make Him Lord, the two are Not The Same! Our Savior takes care of the Spiritual Sin, but we still need to deal with the Fleshly Sins that we do every day.
2 Corinthians 5:17 KJV
“Therefore if any man [be] in Christ, [he is] a new creature: old things are passed away; behold, all things are become new."
Most quote this Scripture as “One and Done”, that from the time of Accepting Jesus As Savior that it takes care of everything within our lives, this is a False Teaching!!! When we Accept Jesus As Savior, from that point forward we need to Understand that the Way We Were is no longer Acceptable To Jesus, that those things need to Pass Away and that Everything NOW SHOULD BECOME NEW. That is, I now Stop Thinking and Doing things My Way and I Change Everything Into God’s Way.
So then, the First Area is Our Brains, Our Thinking, Our Understanding.
Romans 12:1-2 KJV
"1 I beseech you therefore, brethren, by the mercies of God, that ye present your bodies a living sacrifice, holy, acceptable unto God, [which is] your reasonable service. 2 And be not conformed to this world: but be ye transformed by the renewing of your mind, that ye may prove what [is] that good, and acceptable, and perfect, will of God."
What is the First Thing that we must do… “Transform Your Mind”. But the Key to this is by Studying God’s Word, without Studying there can be No Transforming Of Your Mind. This will bring forth the First Step of the Fruit Of Righteousness.
The Second Step is the hardest of this Two Step process, you MUST LIVE WHAT YOU STUDY! For an example of two of the biggest issues in the world right now…
If God says that Homosexuals are an Abomination to Him, if God says that if a Man lies with a Man or a Woman lies with a Woman is an Abomination then, WHO am I to say any different? For if God says that it is an Abomination to Him then, no matter what I Think or Society Thinks it is as God Says, so then, I Must Change MY Thinking into the Righteousness Of God…it is My Choice! If God says that Man is the head over the Woman, then they are Not Equal IN God’s Eyes. If God says that a Woman is to Submit, Obey her husband, then WHO am I to say any different to these things!!! I MUST therefore Change My Thinking, Change My Actions into The Righteousness Of God!!! To Walk in the Righteousness Of God literally means …
Galatians 2:20 KJV
“I am crucified with Christ: nevertheless I live; yet not I, but Christ liveth in me: and the life which I now live in the flesh I live by the faith of the Son of God, who loved me, and gave himself for me."
But, UNDERSTAND THIS, Brothers and Sisters, it is YOUR FREE WILL THAT DETERMINES YOUR WALK, it is Not The Father, it is Not Jesus, it is Not The Holy Spirit, it is YOURS!!! Our Walk is Our Walk regardless of any outside influence, it is My Choice that I Make, to Believe or Accept rather to the Righteousness Of The Flesh or the Righteousness Of God, it is ALWAYS MY CHOICE!!!
If The Bible, God’s Word, tells me that This is Right and This is Wrong then, WHO AM I to question??? The Scriptures tell us that we CANNOT SERVE TWO MASTERS AT THE SAME TIME, it is Impossible to do so…In God’s Eyes.
Matthew 6:24 KJV
“No man can serve two masters: for either he will hate the one, and love the other; or else he will hold to the one, and despise the other. Ye cannot serve God and mammon."
Many use this Scripture as dealing with Money Only, but it goes way beyond just money. It is speaking about Where Your Heart Is…
Matthew 6:21 KJV
“For where your treasure is, there will your heart be also."
If you say that Jesus is Your Lord, then, Absolutely, you Must Do, Must Be, What the Scriptures Say that we are to be like. That we Must Obey The Word inside and out with Our Very Lives!
Luke 6:46 KJV
“And why call ye me, Lord, Lord, and do not the things which I say?"
Salvation is Unto Righteousness, first the Spirit then the Flesh. We cannot continue to say that Jesus Is both Savior and Lord if He, His Word, The Holy Spirit are not Controlling All Things Within Your Life, Jesus will call you a liar!
Now, one last thing. Living in Righteousness has a cost, it will cost some of you to die, to be persecuted, to be mocked, to be hated, to be judged, but be not afraid nor dismayed, for Jesus Our Savior and Lord went through more than this that we could ever imagine, it went beyond The Cross.
Matthew 24:13 KJV
“But he that shall endure unto the end, the same shall be saved."
Amen and Amen!!!
Email: godsonlyfoundation@gmail.com
Website: ApostleLee.com
