SmallRig has a range of new accessories for the Zhiyun Crane 3S gimbal. These include a Mounting Clamp, a Mounting Plate, and a Baseplate.
All of the accessories have been designed to be as lightweight as possible.
SmallRig Mounting Clamp for Zhiyun Crane 3S Handheld Stabilizer
Screenshot 2020 05 20 at 11 23 18 PM
The SmallRig Mounting Clamp allows you to add accessories to your gimbal.
Screenshot 2020 05 20 at 11 22 57 PM
Screenshot 2020 05 20 at 11 23 06 PM
The clamp locks onto the neck of Crane 3S through the use of two captive m4 screws.
Screenshot 2020 05 20 at 11 22 50 PM
The clamp has a maximum payload capacity of 15kg (33lb), yet it only weighs 115g (4oz).
Screenshot 2020 05 20 at 11 23 28 PM
Screenshot 2020 05 20 at 11 15 30 PM 1
The Mounting clamp features multiple 1/4″-20 threaded holes and ARRI 3/8″-16 threads which makes it easy to mount a wide range of accessories, such as the separately available Magic Arm and Cold Shoe. By doing this you can add attachments such as a monitor, light, or microphone.
Each side incorporates a NATO Rail that allows for quick-release accessories such as the Magic Arm and NATO Handle.
The interior of the clamp features rubber pads so your Crane 3S won’t get scratched.
The Mounting Clamp is available to pre-order for $24.90 USD. It will start shipping on June 7th.
SmallRig Mounting Plate for Zhiyun Crane 3S Handheld Stabilizer
Screenshot 2020 05 20 at 11 31 52 PM
The SmallRig Mounting Plate, just like the Mounting Clamp, allows you to place accessories on your Crane 3S.
Screenshot 2020 05 20 at 11 32 16 PM
The Mounting Plate locks onto the gimbal through a captive 3/8”-16 screw and two locating pins to prevent it from twisting.
Screenshot 2020 05 20 at 11 32 24 PM
It features multiple 1/4″-20 threaded holes and ARRI 3/8″-16 threads that enable you to mount a wide range of accessories, such as the separately sold Magic Arm and Cold Shoe.
Screenshot 2020 05 20 at 11 32 00 PM
The plate is compatible with Zhiyun’s original sling handle adapter and SmallRig Sling Handle. The interior of the plate features rubber padding so it doesn’t scratch or damage your gimbal.
The Mounting Plate is available to pre-order for $13.90 USD. It will start shipping on June 7th.
SmallRig Baseplate for Zhiyun Crane 3S Handheld Stabilizer
Screenshot 2020 05 20 at 11 40 08 PM
The SmallRig Baseplate allows you to add accessories to the bottom of Crane 3S gimbal.
Screenshot 2020 05 20 at 11 38 33 PM
This baseplate attaches to the bottom of the stabilizer with a captive 3/8”-16 screw and two locating pins to prevent twisting.
Screenshot 2020 05 20 at 11 38 26 PM
Just like the other products listed, it features multiple 1/4″-20 threaded holes and ARRI 3/8″-16 threads for mounting accessories.
Screenshot 2020 05 20 at 11 38 44 PM
You can also attach the Top Handle to hold your gimbal upside-down or to attach an Easyrig. The plate is compatible with Zhiyun’s original tripod.
Screenshot 2020 05 20 at 11 38 51 PM
It is available to pre-order for $13.90 USD and it will start shipping on the 7th of June.
Comments