Blogs/News/PSAs

The PB32A-3R-II placing boom adopts high strength steel as its arm material. And the main electronic components are products of the world-famous brand, with high-quality. The whole machine is driven by hydraulic system and can be easily controlled by cable remote control or wireless remote control. Connected to a concrete pump, the machine can delivery and place the concrete quickly and accurately in a wide work range which can reach up to 32 meters.

The PB32A-3R-II model is upgrade model of TRUEMAX PB32A-3R concrete hydraulic placing boom. It continues the TRUEMAX high quality and also has been improved as the customer feedback we received in market. The total weight and max lifting weight is much less than before.

Features of Self Climbing Placing Boom

The boom is R-type folding design and it is fully hydraulically driven. It is more flexible in folding and unfolding, and has a wide range of placing concrete. The boom structure is made of high-strength steel plate with and less weight.

The whole placing boom is equipped with wireless remote control and wired remote control. The operation is easy and convenient. And when a remote control fails or the wireless remote control is interfered with by a signal, another remote control can be used to ensure that the construction will not be affected.

There are two types of internal climbing: climbing inside the floor and climbing in the elevator. Users can choose according to their own needs and meet the needs of different construction sites. The whole machine climbs up with its own jacking device, saving time and effort.

The main electrical and hydraulic components adopt international famous brands, and the quality is stable and reliable.

The whole machine is lighter at least 2~3 tons than other manufacturers placing boom. The floor bearing has been reduced.

The hydraulic pump station and the electric control cabinet are integrated on the lower support, which not only realizes the modular design, but also avoids the situation that the users at the construction site take over the wiring themselves, which not only reduces the failure rate and also is easy for installation.

The parts of the hydraulic pipeline that need to be connected on site use a quick connection joint, which not only makes the installation convenient and quick, but also avoids oil leakage.

Optimized the design of the hydraulic oil tank volume, which saves a lot of maintenance cost to change the hydraulic oil.

The hydraulic oil tank has its own liquid level sensor. If the hydraulic oil is not reaching the necessary level, the placing boom will stop automatically to avoids the oil pump sucking damage.

The weight of the lifting unit is greatly reduced, the lifting weight requirement for the construction tower crane is reduced, and the adaptability is wider.

The design of the components is compact and reduces transportation costs.

Without balance weight, which reduces the space limitation of the construction site.

Technical Specifications

The main hydraulic original brand

We are professional Omni Direction self propelled scissor lift manufacturers, supplier and factory in China.We can produce scissor lift according to your requirements.

Product Features:

Omni Direction self-propelled scissor lift is mainly applied in the fixing, constructing, detecting and maintenance of steel structure workshop and sorts of aerial equipment. With character of omnidirection and lateral-step, it can be operated in condition which space is limited and working height is tall. CE certified.

1) Structure: scissors, enable extended-platform, the setting of anti-press.
2)Sole control system, character of omnidirection, side drive.
3)Four-wheel drive, the direction of Mecanum wheel could be controlled separately by the control system.
4)Maximum speed: 4-5km/h.
5)Gradeability: 15%.
6)Pot-hole protection and tilt alarm.
7)Emergency down-valve device
8)OBD circuit fault code display
9)Engine restart protection
10)Engine glow plug preheating unit
11)Overload limit
12)Forward and backward extension platform

Parameters

We are professional self propelled platform 25-27M supplier and factory in China.We can produce the product according to your requirements. 

Self Propelled Work Platform 25-27M Product Features

GTBZ25 & GTBZ27Z SELF PROPELLED AERIAL WORK PLATFORM (TELESCOPIC BOOM)
High Safety of Body Structure
Patented Weighting System 

It can accurately weight what on the platform with automatic division of various load levels; Precise Weighting Ability in all locations of the platform for objects or human beings; Automatic power cut-off and alarm with light and sound when the platform is over-loaded.
Patented Socket Tow-Chain System:it avoid serious disorder and rupture of the cables and oil-pipes, which is caused by over-bending of boom and cantilever tow-chain.

Unique Lift Arm Design and Structure
The boom is made of high-strength steel plate, which guarantee our products having sufficient strength ,resistance ability to deformation. Through the methods of finite element analysis and dynamic simulation, the boom can realize lightweight design.

Travelling System 
Axis Oscillating: driven by hydro-cylinder, the wheel axis oscillating can fully ensure stability of the whole machine when working.

Four-Wheel-Drive and Solid Tires: four turning modes including front-wheel, rear-wheel, front &rear turning and slanting drive, powerful gradeability.
Electrical Controlling System
Automatic Range Restrictor: safety alarm, auto speed-limiting and range restriction function which is controlled by intelligent system.
Double Sensors and Dual-poop Protecting Circuit: to guarantee high reliability and durability of the whole electrical controlling system.

Advanced CAN-BUS Controlling Mode: simple circuit, easy maintenance and excellent reliability.

High-Quantity Steel Connector of Aerial Craft: the protection level reach IP65.

Emergency Power Unit: ensures retracting in case of engine failure.
Humanizing joystick: makes operators feel convenient and comfortable.
Emergency Power Unit and Joystick of control box

Hydraulic Press System 
Made-in-European or in-America hydraulic parts ensure a high reliability. All moves are achieved through stepless change-over by electric-hydro proportional valve, which enhance the machine’s jiggling ability.
The hydraulic system are composed of oil-absorbing filter, high-pressure filter and return oil filter, Which fully ensure the cleanliness of the hydraulic oil.
Engine                                            VALVE                                                  PUMP

At Whitney Houston’s funeral, Actor Kevin Costner said at “The Bodyguard” audition, she didn’t feel that she was good enough and/or pretty enough to get the part. He said because of her insecurity regarding her looks that she went in the back and put on more make-up and that it smeared down her face because of the hot lights.

And since her death, some people have been talking about how could such a talented, beautiful woman be insecure about who she was?

Click on http://pressonwebzine.wordpress.com/2012/03/06/whitney-houstons-death-reminded-me-to-love-myself-from-the-inside-out/ to read “Whitney Houston’s Death Reminded Me to Love Myself From the Inside Out” Blog.

Thank you and feel free to share it with your family and friends.