Blogs/News/PSAs

If the time of hf welding pvc is too long, there are often some faults. After the failure occurs, users must find and deal with it in the first time and solve it in time. For different faults, the solutions are different. The following solutions are listed here for everyone:

If the welding effect is not ideal or it cannot be welded or the workpiece is damaged when it is in the process of hf welding pvc, we can not think that it is the problem of equipment. It could be other problems. For example: equipment setting error, blown fuse and so on may happen.

Common failure analysis and solutions:

1. If there are bubbles in the process of hf welding pvc with workpieces, it is not directly related to the equipment usually.

(1) situation of loose connection

it is possible that the flow meter of the gas regulator has been damaged or blocked with sundries.

(2) there may be sundries on the surface of the workpiece.

2. it is not directly related to the equipment if the voltage is unsteady in the process of hf weldingpvc with workpieces.

(1) loose connection wire between the main machine and the extension machine

(2) the induction coil is out of shape or there is no distance between the coil and the coil, or the induction coil is loose.

If above circumstance has been excluded, it still cannot work normally, users should turn off equipment and ask professional technicians to repair the equipment. If the device suddenly stops working in the process of use, you should immediately turn off the device and check the host, and wait for 3-5 minutes before starting up. If it can not work normally after turn it on, ask professional technicians to repair the equipment. But users also need to be skilled in using the equipment, and can make an accurate judgment of the corresponding fault to timely solve the fault, reduce the waste and loss of equipment and production.

Committed to leading the world's highest performance custom interconnector solution in EMI Filter, Multi cable assembly, PEEK terminal, PEEK insulator, silicone rubber parts, Hermetically-sealed connector, HTHP connector, Waterproof & chemical resistance connector, ultra nano miniature connector.
Custom connectors are suitable for different special application environments. Customized ultra-small, ultra-light and ultra-thin connection terminals can be customized. Non-standard parts (sealing parts, transmission parts, AND REPLACEMENT parts, etc.) can be customized to the highest level of the end use. Increase industry differentiation and competitiveness of products.

Application For CUSTOM CONNECTOR

customized Ultra-light small size the most harshness environment temperature application in Standard & Non-Standard Parts & Terminal Interconnect Solution.

COMBO CONNECTOR

Sunkye combo connector series combines the size and weight advantages of a Micro -D connector with the added ability to handle higher power needs. These connectors feature combinations of .079 inch (2mm) power contacts and TwistPin signal contacts. Hyperboloid socket applied in low-frequency contacts; low insertion and extraction force. Suitable for harsh environment, shock and vibration immunity. Two guide pins are in different sizes, avoid is-operation. Widely applied in aerospace, military and communication types of equipment. etc. 

RAILWAY SYSTEM

Sunkye rugged high current/high voltage connectors and interconnect systems are integral to the subway train that keeps cities in motion with modern style and efficiency. 
Sunkye rugged industrial power connectors for multi-phase power applications are also currently deployed on Trains for Regional Service (TSR) in Russian.they can adapt to the different voltages of the various railway networks.