Blogs/News/PSAs

Zhiyun, the world-renowned brand for camera gimbals, has just announced the arrival of the new CRANE 3S. This new gimbal is made to handle heavier, bulkier cameras with more accessories attached. Think of the CRANE 3S as the big brother when placed beside the WEEBILL-S that we reviewed here.

The CRANE 3S does take on Zhiyun’s new product design mantra and it is now made with a similar mindset as the WEEBILL-S. The new CRANE 3S now has a modular design which means you can literally make it yours and most suitable for your filming environment.

The new CRANE 3S is also equipped with the new SUPER motors, enabling up to 6.5kg payload in total. According to Zhiyun, it can carry large cameras like the Canon EOS 1DX, Blackmagic Pocket Cinema cameras, and even Canon Cinema EOS, Sony FS and FX series, and Red Digital Cinema cameras.

The new CRANE 3S also has an extension module (included) that attaches onto the roll axis, so that you can mount larger cameras. This module can be detached so that smaller cameras can be kept in a small footprint.

The overall utilitarian design of the CRANE 3S comes with a detachable second handle with two options – EasySling Handle and SmartSling Handle. You can either mount EasySling handle to extend the grip for more comfort upright & underslung operation or choose to mount SmartSling handle featuring an intuitive control panel and OLED screen, for direct camera & gimbal parameter adjustment, or combine them together.

The handle mods are easy to fit and remove, and both provide multiple thread holes in different sizes to mount accessories. The modular design makes CRANE 3S highly compatible with motorized dollies, jibs, cable cams, Easyrig, etc.

Zhiyun is also moving towards removable 18650 batteries too, as the new CRANE 3S accepts a total of 3×18650 batteries and is able to run for 12 hours. There is also another DC-in power port on the battery compartment that allows up to 25.2V direct charging.

For longer shoots, Zhiyun also has a new accessory called the TransMount PowerPlus Battery Pack. It is made specifically for the power-hungry CRANE 3S as it also acts as a compact fast-charging power bank for the gimbal and camera together.

The TransMount PowerPlus houses six 18650 batteries and independently provides 18 hours of runtime for the gimbal.

Another feature that is brought over from the WEEBILL-S is the axes lock. This is very useful to ensure that the gimbal does not swing around while it is not in use. This individual axis lock is also useful for balancing the gimbal.

The new CRANE 3S also comes with new firmware with an algorithm that enables higher responsive speed and smoothness. In fast action shooting, the CRANE 3S can resist high winds. The 55° tilted roll axis is designed for an unrestricted view and allows enough space to mount large cinema camera combos.

For those who are already using the Zhiyun TransMount Image Transmission Module, the CRANE 3S also supports it. This means that Zhiyun is expanding its ecosystem of accessories so that it works with multiple different gimbals.

Pricing and availability

The all-new Zhiyun CRANE 3S can be purchased at the Zhiyun official store. It is available in three options:

CRANE 3S-E (with EasySling Handle) @ USD $649

CRANE 3S (with SmartSling Handle) @ USD $739

CRANE 3S Pro (with SmartSling Handle, PowerPlus Battery Pack, Zoom & Focus Controllers, Image Transmission Transmitter and Smartphone Clamp) @ USD $1,149

Click for more information about CRANE 3S.

Like our Facebook Page here at NasiLemakTech.com for more news and in-depth reviews! Also, join our Facebook Group for insightful information and memes!

Overview

Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 atmospheric particulate monitor with high accuracy, reliability, stability and economy. It can measure PM10, PM2.5 and dust particles of other cut sizes, widely applied in inhalable particles concentration detection in environmental atmosphere monitoring.

Principle Of DPM-6000 PM Monitor PM2.5/PM10

The monitoring principle of the pm monitor is mainly based on enrichment technology of atmospheric particulate and beta ray attenuation method. The instrument concentrates on particulate matters whose aerodynamic equivalent diameter is smaller than 2.5/10μm on the rolled filter membrane. The instrument adopts low-radiation 14C as a radioactive source. The emitted Beta-ray passes through the filter membrane with contaminants and will be received by the detector. The detector is composed of a photo-multiplier tube (or Geiger detector), plastic scintillator and counter. The thickness of enrichment can be analyzed quantificationally according to Beta-ray energy that detector received, then the PM2.5/10 concentration in the air can be calculated.

Features Of DPM-6000 PM Monitor PM2.5/PM10 measurement device

The design of the gas path keeps filter paper, a radioactive source and detector immovable during enrichment and measurement, ensuring a good lower detection limit.

US EPA standard beta ray attenuation method, which spares the complicated operations of TEOM, such as manually replace filter paper and weight. Compared to the light scattering method, it has higher measurement accuracy.

Cutter, based on simulation verification of aerodynamics, will provide a various selection of accurate particle.

Sizes: PM1, PM2.5, PM10, TSP.

Sampling flow is measured by a mass flow sensor and corrected with collected ambient temperature and pressure to get the sampling flow of the field.

Use C14 source which is of low-density, low activity, and long half-life to realize stable measurement. No special protection is needed. Reliable and safe.

Flexible paper-pressing structure. Mechanical driving design is simple and reliable; greatly reduce paper breaking and paper jam and avoid the error caused by the moving of filter paper.

The pipeline heating system is used to eliminate interference from ambient humidity and make the detector fit into sudden.

Flow control system with precise closed-loop feedback; stable sampling flow and small error.

Various external ports, such as RS232/RS485, 4~20mA and etc.

Low maintenance frequency, once a year.

Specification Of DPM-6000 PM Monitor PM2.5/PM10

Application Of DPM-6000 PM Monitor PM2.5/PM10

Inhalable particle real-time monitoring in industry,, construction, residential district and etc.

Environment assessment, permission, and pollution forecast and pre-warning.

Ambient air quality monitoring and mobile air monitoring experimental station.

Occupational disease research, and long-term background environment research.

Secondary emission monitoring (coal storage area, wharf, etc.).

Hangzhou Zetian Technology is committed to the integrity, strength and quality of our products. If you want to know more details or want a quotation, just feel free to contact us!

Overview

WEM3080T 3 phase electricity monitor is a Din rail, there phase Wi-Fi Energy Meter/Wi-Fi Electricity Monitor. It can be easily installed and fit neatly inside your electricity panel, and provides insight into your energy consumption and analysis through our dedicated Online Energy Consumption Monitoring System (https://www.iammeter.com/) and Android/IOS app. With our cloud service, you can easily understand your electricity bill and get timely alert when the total energy consumption in a month reaches a preset value.

It is highly-integrated power meter with Wi-Fi module embedded. 3 phase energy monitoring devices can measure the data of specific electricity equipment, such as AC voltage and current of each phase, active power, total energy, and report them to the cloud every 5 minutes. You can directly get access to the its internal web server and easily set the Wi-Fi network configuration by one-key setup. With open data interface (Http get interface and Tcp Interface), the measurement data can be very flexible to stored locally or upload to your own server.

Key Features

Real-time energy monitoring of each phase and report to cloud every 5 minutes via Wi-Fi network

Simply one-key Wi-Fi setup to connect to your Wi-Fi network

Enterprise-class performance, suitable for domestic, commercial, industrial use and solar system

Cloud service and Mobile app is available

Support local monitoring via LAN or uploading the data to your specified server with open Http or Tcp interface

• pole DIN-rail mounting fits neatly in the meter box

Standard Inclusion

One-Key Wi-Fi Setup

Use your smart device's Wi-Fi connection setup, connect to the iMeter's network and few steps to finish the Wi-Fi setting configuration.

Monitor by Iammeter Platform

Iammete platform:https://www.iammeter.com, is our IoT platform dedicated for energy consumption and energy data monitoring. By connecting iMeter to it, you can easily view the real-time and historical data and receive the timely alert notification.

Monitor Locally via LAN

You can connect your iMeter-WiFi via LAN to your PC that running local monitoring software. No cloud service required, and no internet needed for you to save your cost.

We have air quality monitors for sale!

Volatile Organic Compounds (VOCS) are carbon based compounds that pose a significant health hazard due to their toxicity. VOCs online monitoring system adopts PIO (photoionization detector ) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough uv energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas.

The system consists of sampling unit, condensing unit, zeroing unit, calibration unit, display unit, pressure alarm unit and analysis instrument. The sample gas enters into the PIO under the action of filtration and condensation of the suction pump. The detector transmits the processed concentration signal to the display unit, the end user, and the EPA platform. The user can set the auto zeroing and calibration period according to the actual situation. While the pressure alarm unit outputs a pressure alarm signal when the injection port of the analysis instrument is blocked, prompting the end user to clean the filter in time.

Features of EQMS VOCs Online Monitoring System

4.3-inch LCD screen, good human-computer interaction experience.

IP65 high standard protection design, which can be installed directly in the paint shop and outdoors.

Automatic zeroing and automatic calibration design greatly reduce maintenance workload.

Modular design, low maintenance cost.

Automatic temperature and pressure compensation can accurately calculate the gas concentration under normal pressure.

Battery module can be matched for continuous monitoring in power failure state.

Scalable SD memory card design with unlimited storage of historical data.

The alarm signal will be output to avoid in valid data if the sampling port is abnormally blocked.

Support HJ/T212, modbus and other protocols to support protocol customization.

Application of EQMS VOCs Online Monitoring System:

Apply to organic industrial pollution emissions in transportation equipment manufacturing, industrial coating, packaging, printing, paint manufacturing, organic chemicals, tire manufacturing, semiconductor integrated circuits, furniture manufacturing, household appliances, wire and cable, paint dry, footwear, synthetic materials, monosodium glutamate manufacturing industrial.

If you are looking for 2.5 monitor? Just contact us!

Overview

EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough uv energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas.

Composition Of EQMS-200 VOCs Online Monitoring System

The system consists of a sampling unit, condensing unit, zeroing unit, calibration unit, display unit, pressure alarm unit and analysis instrument. The sample gas enters into the PIO under the action of filtration and condensation of the suction pump. The detector transmits the processed concentration signal to the display unit, the end user, and the EPA platform. The user can set the auto-zeroing and calibration period according to the actual situation. While the pressure alarm unit outputs a pressure alarm signal when the injection port of the analysis instrument is blocked, prompting the end user to clean the filter in time.

Specifications Of EQMS-200 VOCs Online Monitoring System

If you want to know more about the voc computer monitor price, just contact us!

We can provide professional and smart solar pv remote monitoring system and products that can be Networked, Monitored, and Analyzed.

The Photovoltaic pv energy monitor collects and analyzes number of parameters being measured in a PV plant to monitor and/or evaluate its performance. In order to ensure the reliable and stable operation of any PV system, an effective monitoring system is essential. Moreover, the monitoring system keeps track on various electricity generation indices and fault occurrences.

As one of the well-known professional IoT solution provider for Solar monitoring system, DeviceBit has dedicated to provide the best, most comprehensive and cost-effective PV monitoring software and solar monitoring devices for the traditional industries. Featured with simple installation, easy operation and powerful IoT platform, DeviceBit enables customers to remotely monitor their solar systems anytime from anywhere, with minimized time and costs. DeviceBit contributes to ensure the effective uptime of PV systems and to reduce O&M (operation & maintenance) costs, and therefore maximizing yield and ROI (return on investment).

Inverter Data logger Introduction

Inverter data logger is mainly used in distributed PV power station. It records inverters' operation status and the generated power to make a long-term monitoring of the PV system. As a high cost performance product, inverter data logger for solar system only needs to be invested a little but greatly promotes the rate of return on investment of the system.

We provide solar inverter data logger for solar with low-cost and high-performance. By collecting the information from solar inverters including performance, status and alarm, the data loggers make the 7x24 monitoring of PV systems feasible and efficient. It features with different wireless connectivity, including optional Wi-Fi/GPRS network, which is very flexible to be applied in various scenarios. Working with our cloud service, you will have a complete system that provides you with all important information, parameters and conditions about your solar inverters and PV plant. Android/IOS apps are also available on google play or apple store. Download it and monitor your solar inverter and PV plant on hand. It can collect all the accurately real-time data, including status, performance and alarms from solar inverter by standard communication interface (RS485/422/232) and report to remote cloud every 5 minutes.

The pv logger have standard communication interface (RS485/TTL) for very easy integration to your solar inverter. They can be embedded inside your solar inverter or made as an USB-plug device. We provide fully customization service, including hardware, web system and mobile app design, manufacture and development, to enable you to have 100% your own system and product.

Overview

The GPRS based data logger is an embedded monitoring module that can be easily embedded inside your solar inverters. Working with web-based monitoring portal and android/IOS app, you can record and monitor the solar inverters' operation status, performance and alarms online anytime from anywhere.

By connecting with single inverters through RS485/422/232 interface, the GPRS inverter data logger can collect all the needed data from inverter and transmit them to remote monitoring portal every 5 minutes. The GPRS data logger can connect to the internet via mobile GPRS networks by simply powering on. It supports 850M/900M/1800M/1900M dual frequency band. As a high-cost performance product, Inverter Logger only needs to be invested a little but greatly promotes the rate of return on investment of the system.

The customization service is provided for this product. We can provide total solution, including hardware customization (power supply, communication interface and other necessary parts) and embedded firmware customization according to the communication protocol of your solar inverter, for perfect integration and smooth communication with your solar inverter. Moreover, we can provide customized web monitoring portal and android/IOS app. With our customization service, you will have a completely your own product and system.

Key Feature

Satisfied for industrial application and able to work under high temperature

Power on and then it can automatically connect to the cloud

Collect the inverter data and report to the cloud every 5 minutes

The communication protocol with the inverter can be customized

Easily to be embedded into the inverter

Support 850M/900M/1800M/1900M dual frequency band

TTL or RS485 communication interface are optional

Hardware Appearance

Please see below product we customized for our customer previously. We will provide every customer a customized product.

View the data on mobile app

Please see below app UI we customized for our customer previously. We will provide every customer a customized android/IOS app.

Overview

Iammeter is a dedicated commercial energy monitoring system developed by us, to which you can connect your own Modbus energy meter and then start to monitor the electricity usage for your household electricity system, or commercial electricity system, or industrial electricity system or solar system.

System Introduction

Website: https://www.iammeter.com

We have devloped a dedicated online energy monitoring system called Iammeter. It is a kind of online cloud based electrical power management platform in which your own Modbus energy meter can be connected. It can real time monitor the electricity usage so that it is widely used in industrial electricity system, commercial electricity system, household electricity system and solar system. And we have related wireless energy monitor hardware device - WIFI energy meter to track your home energy usage anytime. Alternatively, you can use our networked energy meters product for easier monitoring with Iammeter by one-key setup. You can monitor, analyze and save your energy consumption with this platform.

Key Function

Web-based system for remote tracking the electricity usage for household electricity system, or commercial electricity system, or industrial electricity system or solar system

See real-time statistics, historical data and energy consumption analysis, such as voltage, current, energy, power, to grid etc.

Visualized real-time data, historical data and energy consumption analysis for easy understanding

Any power meter which supports standard Modbus RTU protocol can be connected to Iammeter easily and fast

Open API enables perfect integration into corporate or personal websites

Quickly connect our networked meter to the platform and start monitoring your power consuming by one-key setup

You can set the power tariff for different billing method, such as fixed rate, tiered rate and time of use rate

You can set the alert notification when the accumulated electricity consumption reaches a predefined value

Android/IOS app available on Google Play or Apple store

Get started to monitor and save your energy now on Iammeter!