Blogs/News/PSAs

The industrial robot integration manufacturer is located in the downstream application end of the industrial chain of robots, providing application solutions for end-users. It is responsible for the secondary development of industrial robots and the integration of peripheral automation equipment. It is an important part of industrial robots automation application.

Regional distribution of domestic robot system integrators

Enterprises are concentrated in the Yangtze River Delta and the Pearl River Delta. The reasons are as follows: the production of automobile and electronics industry is mainly distributed in the South and east of China. Shanghai, Wuhan, Changchun and Guangzhou are the four most intensive areas of China's automobile production base. At the same time, Shanghai and Guangzhou are also developed areas of the electronics industry. In the above areas, the sales of industrial robots accounted for the largest proportion, reaching more than 50% in 2017.

Nature Distribution of Domestic Robot Systems Integrator Enterprises

The number of local system integrators accounts for more than 90% of the total number of robotic enterprises in China, but the scale of local system integrators is generally small, and the annual output value of most manufacturers is not high.

In the Chinese market, the main sales channel of foreign brands is system integrators, because foreign industrial robots are mainly used in automobile and electronic industries which require high industrial robots integration. Relying on system integrators can expand the market faster. Domestic brand robotics application industry is relatively decentralized. Plastic rubber, food and beverage, electronic manufacturing and so on are the main application industries of domestic robots. It is mainly used in handling, palletizing and other applications with low accuracy and load requirements.

Accessen Gasket Plate Heat Exchanger utilize clip on the gasket and advanced designs that optimize performance. We provide efficient heat transfer in compact equipment with a small footprint. Most important of all, they reduce your operating costs and save you money. The heat exchanger has a flexible design and service-friendly ensure that even the largest PHE can be serviced and maintained rapidly and easily by one person using standard tools. The product range is extremely wide up to 60 different models. We also have the special plate design for your specific needs.

AHRI

AHRI performance certificationThe Air Conditioning, Heating, and Refrigeration Institute (AHRI) certification is an independent, third-party verification of thermal performance. Through its certification program and standards, AHRI strives to help customers save energy, improve their productivity and help to ensure a better environment.

(accessen)

Benefits

Improved distribution area allows fluid flow to be even.

The optimal combination of H and L plates can make use of pressure drop at the maximum limit.

Eliminates the scaling area.

Higher turbulent flow due to the corrugated design, hence improving the heat transfer coefficient.

Self-lock devices on the corners of the plate ensure proper fastening.

Standard roof and leakage proof design of gaskets ensures the durability of the gaskets.

Clip-on gaskets without adhesives.

Main Features

Accessen is a genuine original plate heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producing 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

Specifications

Maximum processing capacity: 5,000m³/h

Minimum temperature difference: 0.5-1℃

Maximum design pressure: 25bar

Maximum design temperature: 200℃

Maximum heat load: 60MW

Plate materials: AISI 304, 316, 316L, TI, SMO254

Advantage

Accessen are a genuine original plate type heat exchanger manufacturer with all components are produced in our own factory and complete end products. Maximum capacity: producting 30000 sets of heat exchanger and 5000 sets of heat exchanger packages per year.

FAQ

Inquiry request？

Please contact Accessen export office. For the most accurate quotation, please prepare the following data:

Duty, Type of media, Pressure drop, Flow rate, Working pressure, Thermodynamic properties, Temperature, Working temperature.

Which certificates are available for the heat exchangers?

ASME, ISO, AHRI, BV, DNV etc... Case by case certificate was allowed.

Microcrystalline wax has special physical and chemical properties and is widely used in grease thickening, paraffin modification, daily chemical industry, papermaking industry and food industry. There are abundant resources of microcrystalline wax in China. Nanyang and shenyang crude oil are the ideal raw materials for the production of microcrystalline wax.  KING HONOR INTERNATIONAL LTD is a famous microcrystalline wax manufacturer in China. 

In China, microcrystalline wax was prepared from vacuum residue of high wax crude oil by propane deasphalting and solvent dewaxing in combination with the production of residual lubricating oil. The solvent dewaxing and deoiling process of microcrystalline wax is the same as that of paraffin production, However, deasphaltene oil has high molecular weight and low solubility. In order to obtain microcrystalline wax products with low oil content, the composition of the mixed solvent needs to reduce the ketone content. At the same time, because of the microcrystalline structure of residuum wax, it is difficult to separate oil wax. The solution viscosity is large, and the filtration speed is slow.  A larger solvent ratio than paraffin is needed to produce oil wax. The process flow of microcrystalline wax hydrotreating is the same as that of paraffin hydrotreating. Due to the heavy fraction, complex components and high content of sulfur, nitrogen and oxygen, the hydrotreating process conditions are rather harsh.

Most of the microcrystalline wax production plants in China were built in the 1970s and 1980s. The residua obtained from decompression of high wax crude oil were used as raw materials. After propane deasphalting and solvent refining, the microcrystalline wax was produced by solvent deoiling. It is difficult to produce high quality products because the process is backward and the refining method is not suitable.

KING HONOR INTERNATIONAL LTD was founded in 2008 with ten years of production experience. It is the domestic famous microcrystalline wax manufacturer,  providing quality wax supply services for customers. Welcome customers to come to inquire.

In the process of PVC sheet production, paraffin has a very long non-polar carbon chain with a very strong polar center. In the structure, the part compatible with plastic in polarity plays the role of internal lubrication, and the part incompatible with plastic in polarity plays the role of external lubrication and demoulding.Compared with fatty acid lubricants, paraffin has no favorable effect on melt tension and vicat softening point, and provides excellent adhesion resistance and flow control.

Wax emulsion production of KING HONOR INTERNATIONAL LTD. is to control melt, even large amount can have very good compatibility with other components. It has thousands of customers in the PVC industry, as a famous paraffin wax emulsion manufacturer. Paraffin is a known plastic lubricant that provides both internal and external lubrication (mold release effect) while maintaining a high degree of transparency and having little effect on gelation.

At the same time, the low volatility of paraffin is important for calendering and vacuum degassing in the process of die-casting PVC sheet. As a kind of internal lubricant, paraffin has good compatibility with polymer, which can reduce the intermolecular cohesion of polymer, so as to optimize the internal friction heat generation and melt fluidity of plastic melt.

The main function of the external lubricant is to optimize the friction between the polymer melt and the hot metal surface of the processing equipment. It has poor compatibility with polymers and has easy migration from inside the melt, so a thin layer of lubricant can be formed at the interface between the plastic melt and the metal.

Besides the application of paraffin emulsion in PVC board, it is also applied in pipe material, wire and cable, etc.

KING HONOR INTERNATIONAL LTD. was founded in 2008, with ten years of production experience. It is a famous domestic paraffin wax emulsion manufacturer, providing quality paraffin emulsion supply services for customers.  Welcome customers to come to inquire.