Blogs/News/PSAs

Design principles for the runner system:

1. For the single plastic part and multiple cavities, the balanced runner (except special) should be used, that is, the position of each cavity gate and the size of the gate point are the same and the length of the runner is the same. To ensure uniform molding conditions in each cavity.

2. For multi products and multi cavities use non-equilibrium runner and gate point, the size of the nozzle or runner should be adjusted according to the distance of the flow to ensure that the cavities are filled as much as possible.

3. In order to reduce heat and pressure loss, the runner should be as short and straight as possible, and the radius should be added at the corner to ensure smooth flow. The surface of the runner must be polished with more than 600# sandpaper. If the part is mirrored, the runner must be polished with 1000# sandpaper.

4. The gate system should be designed cold slug well to prevent cold material entry into the cavity and affect the quality and appearance of the parts.

5. The gate system must be vented to ensure that the plastic melt fills all corners of the cavity, so that the cavity gas can be discharged smoothly.

6. The gate system should be able to prevent the plastic parts from shrinking mark, deformation, dimensional deviation and other defects. The gates are convenient to cutoff or cut automatically and do not affect the appearance of the product.

7. In order to improve the mass production efficiency, it is necessary to minimize the subsequent processing of the plastic parts when designing the gate. Automated mass production, when the gate is taken out, the robot is used as much as possible to shorten the cycle time.

8. For the plastic injection molding gate design, the diameter of the root should be no smaller than the runner. For materials with high brittleness such as PS, a double-sided 3° draft angle should be used. Preventing the breakage of the sprue and runner, while the runner breakage will cause trouble for mass production.

9. Making runner into a circular or U-shaped that is easy to process.

10. The design of the gate system should take into account the amount of runner material. To save costs and eliminate waste, the weight of the runner is controlled below 25% and cannot exceed 50% (special consideration for special parts).

11. When there are multiple injection points on a product, the influence of the size and position of the welding line on the strength and appearance of the product should be considered.

12. For a multi-cavity plastic mould, reasonable, symmetry and compact positioning is able to prevent the eccentric load, reduce the mold base dimension and the tonnage of the molding machine.

13. For a multiple products mould which is also called family mold, the size of the gate must be adjusted according to the plastic parts dimension to ensure that each product is filled simultaneously.

14. For the complicate product, it's necessary to make mold-flow analysis to help design a good runner system and gate position.

Design standard for Sprue:

1.Injection molding machine nozzle and sprue matching

The spherical surface SR of the mold sprue should be 1-2MM larger than the nozzle SR of the injection molding machine. The SR of the nozzle can be found in the specifications of the injection molding machine.

Attention: When designing the mold, check the length of the nozzle of the molding machine that can be inserted into the mold. Should make proposal if have to use the extended nozzle.

2.Sprue diameter ⌀D setting

The sprue D should be 0.5mm larger than the the nozzle of the injection molding machine.

3.To shorten the sprue, we have to:

A.For two plate mould, sprue should be sunk in to the A plate (except for special customer requirements).

B.For three plate mould, big spue bush is must if the sprue length is 25mm or more.

C.Plastic parts with appearance requirements and other special requirements use hot sprue.

Design standard for Runner:

1.Type of runner.

A.Round runner.

B.U shape runner.

2.D series: 2 2.5 3 3.5 4 4.5 5 6 7 8 (10 12 reference use)

3.The runner diameter setting

For PE, PA, the diameter can be small. For PC, PMMA, the diameter value can be a large value.

Estimation diameter according to experience

4.Precautions

A.In the U-shaped runner, the size of the runner can be changed by

adjusting the H value.

B.Use round runner whenever possible

C.The runner must be thicker than the section of the subordinate

runner (see table below), if the secondary runner increases,

D1 diameter can be reduced according to the actual situation.

Design principles for common gates:

The form, position, size and number of nozzles should fully meet the requirements of mold processing and parts production.

1.Direct gate

1. Low pressure loss, easy to fill
2. The pressure at the gate is large, which will cause deformation.
3. It is difficult to remove the nozzle
4. Common gate
5. Easy mold processing
6. Correction is easy
7. Thin and long barrel products should not be used.
8. It is necessary to take care that whether the subsequent processing of the nozzle is convenient and whether the residue after processing will affect the appearance and function of the product.
9. Pin point gate
10. Flexible to select the gate location.
11. Small residual stress near the gate
12. After the mold is opened, the gate can be pulled off by itself. The traces left on the plastic part are not obvious, and the appearance of the surface of the plastic part is not affected.
13. The flow rate of the molten plastic flow through the gate is increased, and the frictional force acts to increase the temperature of the plastic stream. In this way, a plastic part with a clear shape and a glossy surface can be obtained.
14. Injection pressure loss is large, which is not good for plastic molding.
15. The mold structure is more complicated, and the double parting line mold (three plate mold) is generally used to remove the sprue.
16. Because the high flow velocity near the gate, the molecules are highly oriented, and local stress is increased, which may cause cracking. Therefore, without affecting the function of the plastic part, increase the wall thickness of the plastic part opposite the gate.

H.Warpage wil occur when a large plastic part adopts a point gate, so multiple point gates should be used at

the same time.

4. Sub-gate
5. Gate can be located inside or outside of the plastic product, the gate is usually located at the bone position of the injection molded product, the gate is concealed and does not affect the appearance of the injection molded part.
6. Small gate mark.
7. Gate is cut automatically.
8. There is a problem of large pressure loss.
9. Large flow resistance.
10. Fan gate
11. Good liquidity.
12. Can be evenly filled to prevent deformation of plastic parts.
13. The plastic parts look good.
14. Gate is not easy separate.
15. Large gate residue
16. Suitable for large and thin-walled plastic parts.

Slug well design

The location of the slug well is generally designed at the end of the sprue and runner.

That is, the first place where the melt plastic arrives, and venting is must added.

The design of the slug well varies depending on the different gate type.

Ejection of sprue

Normally, designer should have a thorough understanding of material properties, choose the most suitable solution.

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a injection mold maker company in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic injection tooling company, offering custom plastic injection molding service, plastic molding manufacturing and other mould making services.

Following the concept of customer first, HanKing Mould dedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic injection molding china manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

The Principles of parting line plastic injection molding Design

1. The part with coaxiality requirement should be formed on the core side. If it is formed in the cavity and core side, it will be difficult to ensure the coaxiality due to the inaccurate clamping.

2. When selecting the parting surface, the dimension difference between the ends of the plastic part due to the draft angle should be reduced. The parting surface should be selected as much as possible without affecting the appearance of the plastic part and is able to meet the requirement of appearance. The split line and miss-match shall be submitted to the customer for confirmation;

3. The distance between the plates: the determination of the parting line should ensure that the mould cavity and core opening strokes are the shortest;

4. Should avoid the core pulling mechanism as much as possible, if it is impossible to avoid the core pulling, the pulling distance should be as short as possible, and try to make the slider all in core side;

5. Since the locking force is small when the inclined slider is closed, for a large plastic part with a large projection area, the parting line of the large projection area can be placed on the main plane after the cavity and core clamped, and the smaller projected area as the lateral parting surface, otherwise the locking mechanism of the inclined slider must be very large, otherwise, the burr is occurred due to non-tight lock.

6. The determination of the parting surface does not affect the normal opening of the injection gate system, especially the two plate mold with the multi-cavity parting surface.

7. In order to help the venting of the mold, the parting surface is as close as possible to the end of the plastic material stream.

8. The overall structure of the injection mould should be simplified, the number of parting line in mouldis minimized, and a straight parting line is used as much as possible. Should also consider whether the mold is easy to machining and process, easy to take out the finished plastic part, the parting surface should be selected as much as possible on the ridge of the plastic part.

9. Convenient installation of metal inserts.

10. Keep the product in the core side as much as possible and make sure there is enough position.

11. Sharp corners should be avoided in the parting line, as sharp corners will affect the life of the plastic injection mould. Therefore, parting line in plastic designshould check very carefully. If it cannot be avoided, send a proposal to the customer whether the product can be modified.

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a china injection molding suppliers in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic injection tooling company, offering custom plastic injection molding service, plastic molding manufacturing and other mould making services.

Following the concept of customer first, HanKing Mould dedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding china manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

Quality Assurance

Regarding quality as life, in HanKing all operations are under ISO 9001 procedure.

Owning advanced high precision test equipment, we carry out 100% inspection for the entire process, from incoming material until shipment. We have plastic injection molding quality assurance,welcome to buy our product.

Measure Equipment:

3D Measuring Machine

2D Measuring Machine

Toolmaker's Microscope

Height Gauge

Caliper

Pin Gauge

Micrometer

Others

CUSTOMER ORIENTED & CONTINUOUS IMPROVEMENT

Main QC Procedure

Customer's Mold Specification Sheet Check

Design Optimize Control

Steel Hardness Inspection

Electrodes Inspection

Core and Cavity Steel Dimension Inspection

Pre-Assembly Inspection

Trial Report and Samples Inspection

Final Full Inspection (prior shipping)

Mould Package Inspection

TQM(Total Quality Management)

FMEA(Failed Mode Effects Analysis)

SQA(Supplier Quality Assurance)

ORT(On-Going Reliability Test)

SPC(Statistical Process Control)

Six Sigma Projects

CIP(Continuous Improvement Program)

APQP(Advanced Product Quality Planning)

PPAP(Production Part Approval Process)

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a china injection molding suppliers in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic injection tooling company, offering custom plastic injection molding service, plastic molding manufacturing and other mould making services.

Following the concept of customer first, HanKing Mould dedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding china manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

The slewing drive is a full-cycle rotary reduction transmission mechanism integrated with a driving power source. The slewing bearing is used as a transmission follower and a mechanism attachment member, and an active member and a driving source are attached to one of the inner and outer rings of the slewing ring. And the casing, and the other ring is regarded as both the transmission follower and the connecting base of the driven working part, so that the slewing bearing itself is a feature of the full-circle rotary connecting member, and the driving power source and the main transmission are efficiently configured. The part makes it a general-purpose reduction transmission mechanism that integrates the functions of rotation, deceleration and drive, while having a simple structure and convenient manufacture and maintenance.

Bearing & Drive Solutions

VE Vertically-Mounted Slewing Drive

The VE Series Slew Drive is a vertical mounted design for low-speed (<1 RPM) outdoor applications.

Learn More

SE Helical Tooth Slewing Drive

The SE Series Slew drive adopts enveloping worm gearing, more contact and higher torque.

Learn More

WE Curved Gear Tooth Slewing Drive

The WE Series Slew drive adopts curved gear teeth which leads to more contact and higher torque.

Learn More

Heavy Duty Vehicle Series

The double-drive Heavy duty vehicle series can achieve 2 times the tooth contact on the single drive base, which makes it can produce nearly double the output torque in the same volume and installatio...

Precision PE Series

When you want the accuracy of the drive to be controlled between 0.05 and 0.15 degrees, there is no doubt that the precision type has a unique advantage in the high-end transmission field.Precision PE...

Learn More

Types of Worm Gear Slewing Drive

According to the form of the variable speed transmission of the slewing drive, it can be divided into a tooth type slewing drive and a worm drive slewing gear, inheriting the respective characteristics of the slewing gear drive and the worm gear drive, and the two slewing drives can be adapted to medium and high speed and low speed applications respectively. In terms of carrying capacity, the worm-and-worm type performs better than the gear type, and its load carrying capacity, deformation resistance and transmission rigidity are further improved when using an envelope worm drive, but the efficiency of the worm-gear type slewing drive is Inferior to the toothed rotary drive. According to the openness of the slewing drive transmission mechanism, the slewing drive can be divided into open type and closed type. Generally, the open structure is mostly used in applications where the environment is too harsh, the maintenance and maintenance cycle is short, and the open structure is more convenient for the machine. Inspection, maintenance and maintenance are also easier to replace. Closed structures provide a longer maintenance lifecycle where environmental conditions do not change much and are below the level of environmental pollution below medium. We have slew drive gearbox for sale, welcome to buy.

Slew drive can also be called slew drive gearbox. Most of our slewing ring drive is kind of worm gear reducer. And the slew ring bearing is a gear drive part.

The slewing drive is a full-cycle rotary reduction transmission mechanism integrated with a driving power source. As a professional slew drive manufacturers, Fuyong Intelligent produces high-quality slewing drive products! Any inquiry is welcome!

Plastic Mold Trial

In our mold trial shop, we have 7 injection molding machines with a clamping force ranging from 25 T–250 T including one new vertical machine(120T), we can provide professional mould trial and injection molding service, the machines are focused on mold trials and small batch production.

Our workshop is equipped with material dehumidifying dryers, cooling controllers and hot runner controllers.

Mold tests simulating production conditions are performed on every mold

Using the latest scientific molding process and equipment, Hanking is capable to analyze every step of the injection molding process to assist in debugging and qualifying the moulds.

Plastic Resin

We can process a variety of plastic materials, including advanced engineering materials with glass fibers (15-50%) like PPA, PPS, PSU, PA6, PA66, PBT, PEEK, LCP, GRIVORY, PET etc..

We are also familiar with PC, ABS, PC/ABS, ASA, PMMA, POM, PP etc..

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a chinese mold manufacturers in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic injection tooling company, offering custom plastic injection molding service, plastic molding manufacturing and other mould making services.

Following the concept of customer first, HanKing Mould dedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding china manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

SHENZHEN, China, Oct. 11, 2019 /PRNewswire/ -- Zhiyun, the world's leading gimbal manufacturer, is pleased to announce the WEEBILL-S gimbal designed for mainstream mirrorless and DSLR camera & lens combos. This new gimbal offers ultra-low latency image transmission in 1080p with an all-new TransMount Image Transmission Module. ViaTouch 2.0 turns users' phone into a professional monitor and multi-functional remote controller so that they can get a professional experience in a lightweight but rigid device where they have control.

Power, Compatibility, and Compactness

Zhiyun Announces New Gimbal Weebill-S

WEEBILL-S' latest iteration has a 300% upgraded power torque motor and a 50% increase in responsiveness. It works well with camera combos, including Sony's A7III+FE 24-70mm F2.8 or the Canon 5D4+EF 24-70mm F2.8, unleashing unlimited possibilities. The WEEBILL-S unique ergonomic sling mode lets you easily switch between high and low angle shots using the TransMount quick setup kit. The 8th Instune algorithm enables the gimbal to automatically recognize weight and selects the perfect motor strength for the best shooting accuracy.

All-new TransMount Image Transmission Module

The all-new image transmission module enables crystal clear clarity with 1080p at 30fps, maximum 100-meter image transmission featuring; LUT, pseudo coloring, focus peak, and zebra adjustment for professional monitoring and livestream publishing. Users get better usability from the TransMount image transmission module which allows you to add 3 devices to the stabilizer whether it be a smartphone, tablet, or professional monitor.

ViaTouch 2.0 and SmartFollow 2.0

The latest accompanying software update is ViaTouch 2.0 in ZY Play which allows for a seamless connection between smartphone and camera. Users can easily monitor video, control and record, and adjust the camera parameters through ViaTouch 2.0. Coupled with the image transmission module is an all new object tracking function called SmartFollow 2.0. Select the object or even a person from the ViaTouch 2.0 interface and the camera will follow movement with ultra-low latency and a cinematic experience.

Sync Motion and Wireless Control

The all-new motion sensor control system Sync Motion gives users the advantage of controlling the stabilizer's direction with a smartphone and an ultra-high responsive speed gives users an immersive filmmaking experience. Coupled with the wireless remote controller users can control their cameras at long distances and simultaneously use their smartphone to check shooting effects.

Smart Calibration

WEEBILL-S integrates the brand-new self-adaptive control algorithm which automatically recognizes the weight and selects the perfect motor strength for the best shooting accuracy. Plus the WEEBILL-S expansion bar adds a counterweight to balance the gimbal, use the sling mode to add a microphone. Users can adjust the follow speed for each axis to adapt to various shooting scenarios.

Set-up and Pack-up Fast

The WEEBILL-S uses the two-in-one quick release plate allowing for an easier setup and a faster transition between equipment without re-balancing. And, the latch design allows for each axis to be easily locked for better balancing adjustments and storage.

Stay in Focus

The WEEBILL-S supports electronic focus and mechanical focus/zoom control with a handy control wheel on the grip, to realize a fast and accurate focus or zoom when shooting. Using the servo focus/zoom motor, users can control the zoom and focus for a more professional filmmaking experience.

Powerful Endurance

The WEEBILL-S has interchangeable batteries and runs for 14 hours straight. It is able to charge a camera in real-time, ensuring a reliable and effective solution for those long day shoots.

Product information and video

For more information about the Zhiyun WEEBILL-S at WEEBILL-S feature page.

Pricing and availability

The WEEBILL-S is available for an MSRP of US$439 and US$519 for Zoom/Focus Pro package and US$679 for Image Transmission Pro package at the following retailers:

Zhiyun official store

Zhiyun WEEBILL-S at B&H Photo and Video

Zhiyun WEEBILL-S at Best Buy

About Zhiyun

Zhiyun Tech is a pioneer and a world leader in gimbals and stabilizers for both professional filmmakers and personal video creators. Zhiyun's innovative solutions and dedication to delivering products go beyond customers' expectations and strengthens the belief that everyone can be an excellent filmmaker with the right gimbal to equip their shooting device. Learn more about Zhiyun Tech atwww.zhiyun-tech.com or check us out on Facebook: @ZhiyunGlobal or follow us on Instagram: @Zhiyun_Tech

Video News: Zhiyun Tech's "Tiny Giant," the WEEBILL-S, though small in size, it packs power and features that allows to expand creative shooting possibilities when shooting with DSLRs and mirrorless cameras.

 B&H Photo Logo (PRNewsfoto/B&H Photo)

NEWS PROVIDED BY

B&H Photo

Oct 11, 2019, 00:01 ET

SHARE THIS ARTICLE

NEW YORK, Oct. 11, 2019 /PRNewswire/ -- B&H Photo is pleased to share the announcement of the new Zhiyun Tech WEEBILL-S Handheld Gimbal Stabilizer. Touted by Zhiyun-Tech as the "Tiny Giant," it features motors that are 50% more responsive and have 300% more torque than previous gimbals. This allows the WEEBILL-S to remain small and lightweight, while supporting DSLR and mirrorless cameras without reaching the limits of the gimbal's motors—all of which makes it easier to operate the gimbal for extended run times with more flexibility in shooting.

WEEBILL S Gimbal supports DSLR and Mirrorless cameras a full-range POV mode, Vortex mode (for 360-degree barrel rolls)

 Zhiyun Tech WEEBILL-S Handheld Gimbal Stabilizer. https://www.bhphotovideo.com/c/product/1511032-REG/zhiyun_tech_weebill_s_handheld_stabilizer.html

The built-in OLED screen can display a variety of adjustable parameters such as: Motor Strength, Follow Speed, Smoothness, and Deadband (helps prevent unwanted gimbal movements). These adjustments can be made directly on the WEEBILL-S without using the downloadable app. A built-in auto-tune function will tune the WEEBILL-S to mounted camera, providing the most efficient use of power and allowing your WEEBILL-S to run up to 14 hours on a set of interchangeable 18650 batteries, and the WEEBILL-S can power select cameras. Your camera mounts via the two-in-one Manfrotto/Arca-Swiss quick-release plate, while newly designed axis locks make balancing your camera faster and easier. The gimbal supports a full-range POV mode, Vortex mode (for 360-degree barrel rolls), Go mode for extremely fast action, PF mode (pan follower), F mode (follower), which has all axes follow your movements, and L mode, which allows you to mimic jib shots. Additionally, the Zhiyun ZY Play iOS/Android mobile app enables Panorama, Timelapse, Motion Timelapse, and Long Exposure Timelapse shooting.

An optional Image Transmission module mounts directly under the quick-release plate and transmits video signals up to 1080p30, allowing you to livestream from your gimbal. It works not only as a transmitter, but, incorporating a motion sensor, it allows for precision control. The second supported mobile app, ViaTouch 2.0, takes advantage of this, allowing you to connect with your smartphone, camera, and gimbal together electronically so you can adjust settings and control your set up from a smartphone. When coupled with the SmartFollow 2.0 module, sold separately, you can track objects precisely from your smartphone, without needing to mount your smartphone on your gimbal. The WEEBILL-S supports up to three devices wirelessly, including smartphones, tablets, and monitors. A third app, Sync Motion, interfaces with the Image Transmission module and allows real-time monitoring plus synchronous motion control for an immersive FPV experience.

About B&H Photo Video

As the world's largest source of photography, video, and audio equipment, as well as computers, drones, and home and portable entertainment, B&H is known worldwide for its attentive, knowledgeable sales force and excellent customer service, including fast, reliable shipping. B&H has been satisfying customers worldwide for 45 years.

Visitors to the website can access a variety of educational videos and enlightening articles. The B and H YouTube Channel has an unmatched wealth of educational content. Our entertaining and informative videos feature product overviews from our in-house specialists. You can view the B&H Event Space presentations from many of the world's foremost experts and interviews with some of technology's most dynamic characters. Tap into this exciting resource by subscribing to the B&H YouTube Channel here. In addition to videos, the B&H Explora blog presents new product announcements, gear reviews, helpful guides, and tech news written by product experts and industry professionals.

When you're in Manhattan, take a tour of the B&H Photo SuperStore, located at 420 Ninth Avenue. The techno-carousel conveyor spins all year round at the counters and kiosks at B&H. With thousands of products on display, the B&H Photo SuperStore is the place to test-drive and compare all the latest gear.

Contact Information

Henry Posner

B&H Photo Video

212-615-8820

https://www.bhphotovideo.com/

SOURCE B&H Photo

Aquarium landscaping is an art. It creates a mini-world, a living ecosystem. Regardless of whether it is from moss on rocks, flowers from the shore, or algae and fish from the water, you need to consider it during the landscaping process. If you want to make a fish tank, you need to know the methods of aquarium landscaping. So what are the common methods of aquarium landscaping? Let’s take a look together.

What are the common aquarium landscaping methods

1. Ladder aquarium landscaping

This method is suitable for wall-mounted fish tanks. The basic shape is a step-by-step setting method from the background water plants to the foreground.

Critical notes: Put matching elements first, such as stone or driftwood. Pay attention to the texture of the material when placing it, and present a regular rhythm on the irregular material. The same pieces of wood and stone can produce different effects at different angles. The matching elements and water plants must be connected together without interruption to have a continuous overall sense. In the beginning, some plants with a faster growth rate can be planted in the foreground, and plants with a slower growth can be planted in the front and middle scenes. Except for the foreground grass, each kind of water weed is planted in clumps as much as possible. It is best to have only one clump of the same kind in the aquarium. The size and arrangement of each clump of plants are as irregular as possible, so as not to make the landscape too rigid. In principle, the ladder aquarium landscaping method gradually increases from the foreground to the background, but it can also be decorated with a few tall but less dense water weeds as the foreground, which can better show the three-dimensional effect of the landscape. You may need a set of tools for aquascaping.

2.Double-sided set method of aquascaping

Most of them are set techniques that can be viewed on both sides in the aquarium with compartment-style landscaping.

Critical notes: The principle of this method is the same as that of the ladder landscape method, but because both sides of the ornamental are taken into account, both sides must have beauty during landscaping. The middle line of the fish tank can be used as the location of the background grass, and the middle and foreground grass is planted on both sides, so that the layering and three-dimensional sense of the landscape can be more prominent, especially in fish tanks that are not very wide. The technique can more show the interestingness of double-sided aquarium landscaping.

3.Aquascaping with a three-dimensional fish tank

In addition to enjoying the scenery under the water, there must be scenery on the water surface.

Critical notes: Usually, an open-type fish tank is used together with a ceiling-mounted hanging lamp to better show the growth aesthetics of a three-dimensional aquatic landscape. When setting the scene, you can use more watery and floating water weeds, so that you can better enjoy the pleasure of changing the landscape in and out of the water. The three-dimensional aquatic landscaping fish tank is a more difficult landscaping method because it requires a higher level of configuration and there are more problems to consider when landscaping.

Precautions for fish tank landscaping

In the landscape design of aquatic fish tanks, sunken wood or aquarium landscape rock is often used as the accompanying scene. If there are no sunken wood or stones in the small plants, the scenery of the plants will appear stiff and rigid; with them, the scenery of the plants will become more natural and attractive. Therefore, sunken wood and stones have become indispensable companion elements to water plants.

Sunken wood and stubble in forests, mountains or swamps are slowly weathered through long-term sun exposure and wind and rain. Common sunken wood from Brazil is collected from moist or swamp areas. The surface of the material is beautiful, but the texture is relatively soft. The sunken wood made in the Philippines is very hard. Because it is heavier than water, it soon sinks to the bottom. The internal material also does not decay, which is one of the most ideal landscape materials.

The sunken wood set off the water and grass scenery. Although it has played a great role, it has its shortcomings. The reason is that when put into water, it changes the pH of the water, which is bad for the growth of water plants. Stone is also an ideal companion element. It is much more convenient to collect than sunken wood, but it also has disadvantages. It continuously releases alkaline substances into the water and changes the pH of the water. However, it is suitable to be used as companion material for banyan aquatic plants, because banyan aquatic plants are adapted to live in a limestone water environment.

We have fish aquarium for sale, if you want to buy aquarium online, please contact us.

Swiss mechanical and electrical industry originated in textile machinery industry, now, textile machinery industry is still the mechanical and electrical industry is an important part of Switzerland.

Although Switzerland is a small landlocked country, it is the world famous textile machinery production power. Swiss production of textile machinery products and textile testing instrument to sophisticated technology, excellent quality and innovative potential is famous all over the world, it in the global textile machinery industry accounted for 33% of the market.

At present, China has become the world's textile big country, but not the world textile machinery manufacturing power and therefore under the background of new development, understand the major manufacturers of Swiss textile machinery industry, is of great significance to study for us.

Switzerland has many famous textile machinery suppliers in the world, as shown below:

1. Oerlikon group

Mr. Kang group is the world's one of the most innovative and research intensive industrial group, is one of the world's largest producer of textile machinery, in 38 countries and regions in the world with 17200 employees. The company has five business divisions: textile machinery, thin film coating, vacuum system, driving system and advanced technology. Mr. Kang group in the field of textile machinery constantly innovate, constantly set new global textile production standards, and for the global textile machinery industry to provide comprehensive solutions for: from the production of artificial and non-woven fiber plant design, to the ring spinning, rotor spinning, winding, distorted or embroidery equipment manufacturing, which covers the whole textile industry value added.

2. Staubli group

In 1892, Staubli founded a small textile machinery factory, the predecessor of Staubli, in hogan, Zurich. After 120 years of development, Staubli group has been developing and improving. At present, the Staubli (Staubli) group has become the world's leading textile machinery manufacturers, industrial quick connectors and industrial robot, in 25 countries and regions in the world has more than 4000 employees, has 12 industrial production base, annual revenue of more than 1 billion Swiss francs. Staubli (Staubli) group of textile machinery products mainly include dobbies, CAM shedding mechanism, jacquard machine, wire, weaving preparation machine (such as automatic drawing-in machine, tying machine, UNI - the LINK system, etc.), carpet weaving machine (such as double carpet rapier loom).

3. Sulzer Textil

In 2003, Sulzer was spun out of Sulzer group and merged into ITEMA in an independent way. ITEMA group has existing Sulzer Textil (suershou textile), Vamatex (van mett), Somet (sumet) and Fimtextile, among other global brands. Sulzer textile (Sultex) is the world's only able to make all manufacturers of advanced loom weft insertion system, many times during the course of the development of the textile industry has played a key role, the textile machinery products mainly include G6500 rapier loom, P7300HP gripper loom, A9500 new air-jet loom, etc.

4. Rieter group

Rieter group was founded in 1795, is the world's leading supplier of staple fiber spinning production equipment, is the only global can provide spinning process equipment and technology suppliers, based in winterthur, Switzerland, nine countries around the world has 19 production base, more than 4700 employees. Rieter group of textile machinery products mainly include: fiber opening device (such as automatic plucker, pre scutcher carding machine, etc.), high performance, spinning preparation equipment (article drawing frame, and roll machine, combing machine, roving frame, etc.) and ring spinning frame, compact spinning machine, fully automatic and semi-automatic rotor spinning machine, air jet vortex spinning machine, etc.

5. Uster Technology company

Uz technology company, from fiber to the fabric of global market leaders in the field of textile quality control, in the field of textile testing and monitoring, uri stern has incomparable professional experience of more than 60 years. Uster technology co., LTD. Was established in 1875, when it was a wireless telecommunications workshop in uster. Uz technology in textile machinery products mainly include: cotton ginning and grading equipment, fiber inspection instruments, yarn, cotton yarn sizing equipment, quality online monitoring and control system, etc, clearer.

6. SSM company

SSM is a subsidiary of Schweiter technology group focusing on producing textile machinery. In 2011, Schweiter's operating income was 785.6 million Swiss francs. At present, SSM company's main products include: loose type winding/inverted yarn machine, air texturing machine, false twist texturing machine (draw texturing machine), the drafting of air covered yarn machine, winding machine, and yarn machine, yarn singeing machine, molding coiling machine, doffing flat roll machine, etc.

7. Sanderson group

Santex group comprises several world-renowned companies, including Santex, founded in 1982, SperottoRimar, founded in 1980, Cavitec in 1996, and a company founded in 1957. These companies are known for their expertise in their best machines. The Santex AG, the company's main products include grey knitted fabric pretreatment equipment (such as SANTASET machine), knitted fiber pretreatment equipment and device of manufactured goods, such as Actiwash machine, Tubowash, Santableach machine, etc.), knitted fabric post-processing equipment (such as Acti - Tubowash machine, etc.), drum knitting products at the end of the processing equipment (such as Santastretch machine, Santashrink machine, Santaspread machine, etc.), knitted products, in the form of open width direction for final processing equipment (such as Santacut machine, Santashrink machine, Santacompact machine, etc.), knitting and weaving products at the end of the processing equipment (such as Santasoft machine, etc.); SperottoRimar company's main products are cotton, wool, silk and other woven fabric pre-processing/post-finishing equipment. Such as dry cleaning equipment (NOVA), wet mill and surface treatment equipment (PLURIMA), Decofast Ultrafinish, FIXA, FLEXA COMPACT, and UNIVERSA, etc. Cavitec company's main products include hot melt adhesive coating machine (such as CAVIFLEX), roll coater (e.g., CAVI - 2 - COAT), laminating machine (such as CAVISCAT), powder point coating machine, two point coating machine, rubber machine (such as CAVIPREG), spin coating machine (such as CAVISCREEN); The main products of the company include coating, impregnation/compound equipment (dry method/wet process), thermoplastic film embossing machine, etc.

8. Benninger company

As a Swiss with history of more than 150 years, the textile equipment manufacturers, benninger has been one of the leading textile machinery in the world, it has branches and service representative offices all over the world, headquartered in Switzerland, uzi will. Beninger has developed and manufactured textile finishing and curtain canvas leaching equipment, as well as a complete set of systematic solutions. Specific terms, the benninger company's main products include textile finishing equipment (such as water washing machine, check out boiled bleaching, mercerizing machine, dyeing machine, fabric dyeing and finishing line), curtain canvas rubber equipment (such as curtain canvas rubber machine, rubber cord dipping machine, rubber canvas dipping machine, glue preparation device, cutting device, calender assist device).

9. Habasit company

Founded in 1946, Habasit is a leading global manufacturer of conveyor belts, processing belts and belts for food, textile, wood processing, paper making, material handling and automotive industries. In 2011, Habasit had operating income of 5.983 billion Swiss francs, with more than 3,300 employees and 16 factories in more than 70 countries and regions. Habasit textile machinery products including the yarn processing with power transmission belt, spindle tape, conveyor belt, have a high chemical resistance of the printing blanket series emu - 16 eibd, E - 20 embd, emu - 50 axbd, emu - 20 exbd, emu - 20 elbd, emu - 20 elbi nonwovens with cross laid mesh belt series ENT - 6 ee, ENB - ee ee, ENA, ENA - 4-8 ee, etc.

10. Loepfe brothers holdings LTD

Loepfe brothers holdings LTD., founded in 1955 by the Helmut and Erich Loepfe brothers, is based in Wetzikon, Switzerland, where all sales are made. Over the past few decades, Loepfe has become a leader in the global spinning, winding, and weaving electronic quality control system. Loepfe company's main products include YarnMaster Zenit electronic yarn clearer (YarnMaster Zenit increased CV electronic clearer channel, provides quality control for ring spinning and compact spinning, can identify and eliminate polypropylene, solved the foreign impurities of the problems of the past as the package of raw material), MILLMASTER central online quality management system (used to manage YarnMaster electric clear all data, using the precise analysis and charts to closely monitor the quality and production data), and devices used in weaving, weft monitoring device broken ends, yarn knot monitoring device, monitoring device, gripper braking device, weft tension control device, weft sensor used for soluble fabric cutting device, used for different use of yarn running monitoring device, etc.

11Werner Mathis company

Founded in 1968, Werner Mathis has developed into an internationally renowned manufacturer of textile and coating laboratory equipment. The purpose of Werner Mathis is to produce high quality, long service and easy maintenance. These devices are not only used for dyeing and finishing, formulation, testing and coating, but also for the preparation of paints and finishes. As the company focuses on laboratory equipment, it has accumulated rich experience in this field for many years. Over the past 40 years, Werner Mathis company sold more than 13500 sets of equipment, all over the world, most of them still in use, the company still provide maintenance and replacement of spare parts service for users, this is proof that the company's emphasis on after-sales service. Werner Mathis textile machinery products mainly include dyeing machine (such as LABOMAT, AIR BOY series, etc.), lab jet dyeing machine, the overflow jet dyeing machine, cleaning equipment, printing, coating, laboratory equipment (e.g., LABCOATER, 2 - Roll laboratory calender), etc.

12. Luwa Air Engineering company

Lova air engineering co., LTD., founded in 1935, is the world's leading supplier of industrial air engineering systems. Lowa Air engineering company's main products include: Air Conditioning and its control system (Air Conditioning & Controls), Heat recovery system (Heat recovery systems), filtering, and Waste treatment system (Filtration & Waste Handling), Air purification equipment (Air cleaning systems), etc.

13. XORELLA company

Xorella, founded in 1967 in Wettingen, Switzerland, specializes in the design and production of steam humidifying equipment for yarn and fabrics. The Xorella textile humidification equipment produced by Xorella has an innovative indirect steaming function, which is widely used in textile mills, so that it is rapidly gaining popularity in the global textile industry. The main products of Xorella include real air conditioner humidifying machines (such as XO SMART series, XO SELECT round series, XO SELECT square series, xo-mini, xo-dpx, etc.), XO - Ecopac's water-free vacuum system, etc.

14. Jakob Muller company

The company, founded in 1887, is headquartered in frick, Switzerland, and is the world's leading supplier of narrow fabric manufacturing equipment. About cobb, mueller of the company's main products include warping machine (such as MW400, MW700UM, MW1000UM SMA400 SMA800), the warp yarn, yarn unwinding, narrow fabric weaving equipment (such as VARITEX V5, NF series, etc.), the rope weaving equipment (such as NH2M 53, NC2M, etc.), crochet equipment (such as RASCHELINA, MDC8/630), trademark weaving equipment (such as MULTICOLOR MVC2.8, etc.), textile printing equipment, dyeing/finishing/coating equipment, winding and packaging equipment, etc.

15. Swiss4Tex company

Swiss4Tex ultra high speed digital printing machine, using the most advanced Samba sprinkler head, resolution 1200dpi.

Swiss4Tex equipment is currently the world's fastest digital printing machine, top speed of 95 m/min, have two 1.9 meters, 3.4 meters wide, can be 8 colors for apparel and home textile printing, maximum 16 color printing, can provide active, coatings, such as dispersion solution, advising clients can be used to print two kinds of schemes, active 8 colors, acid 8 colors. According to the market demand, it can provide three schemes of low speed printing machine, high speed printing machine, single-pass printing machine.

Many parts of the Swiss4Tex device, including the core part of the printing engine, are made through 3D printing, so the whole device can be used as a "masterpiece" of 3D printing. With high integration, the device weighs only one-third to a quarter of the weight of other common equipment. Swiss4Tex is the most advanced digital printing equipment in the world, and it is highly automated and intelligent. Swiss4Tex USES the robot to clean the nozzle, calibrate the nozzle and maintain.

References:

[1] o 'recom website: www.oerlikon.com

[2] staubli.com website: www.staubli.com

[3] uster technology company website: http://www.uster.com

[4] SSM website http://www.ssm.com.

[5] sanderson's website: www.santex-group.com

[6] benningergroup.com: www.benningergroup.com

[7] halbercy web site: www.habasit.com.cn

[8] lofi (Loepfe) co. LTD. Website: www.loepfe.com

[9] Werner Mathis website: www.mathisag.com

[10] lova air engineering company website: www.luwa.com

WEAVING MACHINERY

As an integrated supplier of weave machine, we are now providing electronic jacquard machine, high speed rapier looms, low speed rapier looms, jacquard looms, terry towel looms, industrial fabric looms, air jet looms and water jet looms. These weaving looms embody features of Europeans looms, as well as our unique design and technique. Diversified product range, reasonable price and first class quality have enabled us to provide specialized and right solutions for clients with different weaving needs.

Overview

Floss Picks help remove plaque and food particles between teeth and just below the gum line for a more complete clean vs. brushing alone.

Slides easily

Shred resistant

Deep cleans tight teeth

Help to reduce bad breath

Direction for use:

Place floss harps between teeth.

Gently guide the floss between the teeth with a careful sawing motion until it reaches the gum line.

Wipe or rub the floss up and down repeatedly against one tooth surface then the other.

Repeat this procedure between all teeth.

Shaped interdental end can also be used to remove food particles from between the teeth.

For single use only.

PERFECT GROUP CORP., LTD. is a dental health company, our principle is: "an eye for innovation, an ear for people's needs and a firm resolve to make the best".

Round concave mirrors are catoptric imaging. Mirrors( including convex) are reflecting back for imaging rather than get through the light, ray of light follows the law of reflection, that is what we called convergence. They always gather the light that shoot to the surface, ray of light that is entered parallelly will be focus on the spot again, ray of light is reflected from different angles because of different directions of surface normal. Round concave mirrors can not only focus parallel ray of light on the spot but also reflect parallel light from spot.

The diagram of a round concave mirror shows focus, focal length, centre of curvature and principal axis. Concave mirrors or gathering mirrors will deflect reflected ray of light. Concave mirrors will have different images because of the different distance between objects and mirrors, which is different from convex mirrors.

Round concave mirrors don’t have chromatic aberration because they are catoptric imaging, this advantage is can’t be compared with any lens. The resolution ratio is in direct proportion to the clear aperture of objective, it is difficult for the production of large aperture lens while concave mirrors that made according to reflection principal are easier. Therefore, round concave mirrors are always used for producing telescope.

Hyperion Optics is a premium supplier of photonics products including optical components, lens systems, and opto-mechanical assemblies from UV, VIS, NIR, to SWIR applications.

Our client base spans across defense, security, bioengineering, pharmaceutical, institutional, industrial, and research industries worldwide. We specialize in DFM (optical assembly manufacturing) input from rapid prototyping to volume production. Our comprehensive metrology coupled with cost-effective philosophy can help Hyperion customers obtain a competitive edge in the global market.

The existing laser technology has always had a short board, which can only emit light of a single wavelength or narrow band. How to expand the frequency of the laser forming ultra broadband, super straight, ultraviolet, visible and infrared wavelengths of coherent white light laser, is still a human unfulfilled dream, it is a worldwide problem of science and technology. This is because the laser optics is composed of optical resonator, gain medium and pump source. The wavelength of the laser is determined by the energy level structure of the atoms, molecules or ions in the gain substance.

Because the natural laser crystal material has a great limitation on the gain frequency range and gain bandwidth, the laser can't produce any wavelength of laser.

Will the perfect white laser be created? What changes and developments could it bring to the application of lasers?

1. The sun light

It is known to all that all things grow by the sun, and the sunlight brings light and heat to the earth. The familiar sunlight is a kind of white light, and its spectrum covers ultraviolet - visible - near infrared - mid-infrared bands, as shown in figure 1, In the visible light band (400-700 nm), the radiation energy is strongest, covering seven colors of red, orange, yellow, green and blue, and continuous distribution and transition in the spectrum. Because the sun is white, rainbows are often seen in the sky after rain, or the sunlight passes through a glass prism through seven colors of light (figure 2). This is a common experience in everyday life.

One of the things that people are less familiar with is that sunlight is a completely incoherent light. In terms of spatial coherence, the sunlight cannot be straight and highly divergent. In terms of temporal coherence, there is no phase correlation and locking between different colors of sunlight. So sunlight can only be used to generate energy for heating, water heaters, solar cells and so on.

But the use of modern science and technology, such as the use of sunlight to transmit information, seems to be out of the question.

laser

The spectral distribution of sunlight. The spectrum of solar radiation including the sun itself, the spectrum of sunlight entering the earth, and the spectrum of sunlight reaching the sea level due to the absorption of atmospheric water and carbon dioxide.

2. The advantages of light and its application

White light laser light source, short wave laser light sources and continuous laser light compared with the ordinary white light, such as sunlight, incandescent lamp, white LED lamp, etc.), it has the advantages of high brightness, high peak power, wide frequency range etc. In the fields of scientific research, defense military, lighting, communication technology, information technology, industrial production, biomedicine, environmental detection, etc.it got a lot of attention.

White light, as a kind of new laser light source, it has a variety of advantages of good directionality, high energy density, super continuous spectrum, great bandwidth, the center of the flexible wavelength, high degree of coherence time and space. This will greatly expand the function and application scope of laser technology. The white light laser or the solar laser is the completely coherent light, not only the height of the laser beam, but also the very small region. Different color between amplitude and phase locking completely, by regulating the amplitude and phase, it can change the time of laser pulse shape follow one's inclinationsly, and produce very short pulse width (femtosecond and the femtosecond laser pulses. Such a solar laser will have the potential to realize the focus and convergence of light energy in space and time. It releases energy in small areas and very short periods of time to form extremely high instantaneous power density.

Our client base spans across defense, security, bioengineering, pharmaceutical, institutional, industrial, and research industries worldwide. We specialize in DFM (optical design manufacturing) input from rapid prototyping to volume production. Our comprehensive metrology coupled with cost-effective philosophy can help Hyperion customers obtain a competitive edge in the global market.

Are you going to get married and looking for the perfect dress? Then you are in the right place. There are many different wedding dresses, it is difficult to find the dress you like, and it suits your personal style. To give you some inspiration, we found some cheap sexy wedding dresses. We have something suitable for everyone, from pure dresses to dresses with classic white lace. Take a look, you will find a beautiful dress for your special day.

1. Sexy wedding dress and lace back

The first recommended wedding dress is a beautiful floor dress. If the dress is decorated with lace on the back, the skirt is decorated with lace. Such a dress will make any bride look gorgeous on herimportant day. When wearing such a dress, you can tie up your hair to show off the lace on the back.

champagne mermaid wedding dress

2. Lace wedding dress, fashion strap

Next, our dress combines traditional bridal styling with modern design. This dress is made of classic white lace with a charming lace back. The shoulder straps make the dress look stylish and sexy. You can choose a dress that fits well, or a dress with a similar back but with a ballgown skirt.

3. Sexy wedding dress

Every bride wants an amazing dress. Our next idea is a statement costume that will do this! This dress has a low collar design. It also has an amazing overkirt. We like this super shirt because you can get stylish, modern dresses and more classic princess dresses. You can makefull use of both of them.

4. Simple and sexy wedding dress

If you prefer less is more, then the next dress is for you. This dress has a beautiful lace corset, sweetheart collar and white floor sweep skirt. Such a dress is simpler than some dresses you will see, but it will give you a sexy and chic bride look.

5. Lace & tulle top

There is also a dress with a transparent lace bodice with charming flowing sleeves and a thin, slim skirt. We like the corset of this dress because it is fashionable, but also uses classic bridal elements such as white lace. Such a dress looks beautiful on any bride. It is especially suitable for bohemian, retro and rustic weddings.

6. Elegant, lace strapless

The dress is very fashionable, so why not wear this one. As you can see with the dress, the shoulder of the dress looks great. This dress is decorated with shoulder straps on the shoulders, you can choose a similar style or choose a style without a shoulder strap.

7. Lace corset and sleeve dress

The perspective lace dress is very fashionable and is a favorite of celebrities. This dress has a transparent lace bodice, sleeves and a flowing skirt. This dress is stunning and combines luxury, stylish celebrity fashion and classic bridal elements. This dress is suitable for any wedding and bride.

8. Lace dress

Our next idea is a lace dress. This dress is more traditional than other dresses because it uses classic white lace design. This shows how you look sexy while keeping the look elegant and classy. This dress is suitable for any bride.

If you want to buy sexy wedding dresses, please contact us.

In addition to paying attention to clothing, a perfect match also needs to use some "accessories" to enhance, in which shoes are a vital presence. Choosing a suitable pair of shoes not only gives a good ending to the entire style, but it is also very helpful for highlighting personal taste and is the key to creating a fashionable style.

Let’s take a look at ladies shoes taobao online

1. White shoes

The fashion trends are ever-changing, but there are so few single products that can stand the test of time and "stand in the fashion circle". White shoes are one of them. The basic color white shoes basically have no difficulty in matching, and they can be perfectly integrated with different colors of clothing without creating a sense of inappropriateness. On the contrary, when matching bright colors of clothing, they can also weaken the colorful sense of color, which is very youthful. In addition, the style of white shoes is more casual, light and comfortable, whether it is daily work, or going out in spring and summer, you can easily deal with it, and you don't have to worry about getting tired.

2. Canvas shoes

The development of canvas shoes has a long history of popularity. It has captured a large group of loyal fans with the advantages of a lightweight, durability, and low prices. It is basically worn all year round, and there is no gender boundary. Both men and women can wear it, which is a must-have item for fashionistas to go out of the street.

3. Leather shoes

Even girls who have prejudices against leather items such as leather pants and leather clothes are hard to refuse the charm of small leather shoes. The smooth upper design can instantly enhance the texture of the entire shape, and it will bring the finishing touch no matter what clothing is matched.

When choosing shoes, you can't just buy them if they look good. You should also pay attention to the durability of the shoes and choose more versatile styles, such as white shoes, canvas shoes, and small leather shoes, to meet a variety of clothing.

Besides, let learn more about men's essential shoes. Always wear the same shoes when going out? Do not know how to match clothes with the same pair of shoes? In fact, men should pay more attention to wearing shoes, because the shoes you wear will unintentionally reveal your identity!

1. White shoes with thick soles

White ball shoes with rubber soles, high wear resistance, has been popular since the 1980s. Today, the design adds a thick bottom height and shoe ring changes to create a new visual effect. The most important thing for a pair of white shoes is to maintain its cleanliness. The versatile sports shoes can be said to be the first choice in the men's shoe cabinet!

2. Patent leather shiny black leather shoes

Due to the leather material (faux leather or animal leather) used in leather shoes, it will be more durable than cloth shoes. It can be mixed with a suit on a formal occasion, and can also be matched with shorts in leisure.

3. Simple monochrome loafer

Loafers are non-laced shoes that are easy to put on and take off. The feature is the leather straps that cross over the upper from the sides of the saddle or add simple and design metal buckles. It is simple and yet formalized in formal wear. It is an important shoe in the European and American men's shoe cabinets.

Shop the latest fashion online at betteryoyo, the best way to buy from taobao, and discover new favorites in footwear. Find every footwear of both men and women. We will give you fashion in a more sustainable way.

With a full air-condition tooling shop possessing different machines and expertise, we can offer tools from small precise parts to middle-big complex automotive parts.

Tooling Technology:

Multi-Cavity

2K Molds

Insert molding

Over-molding

Babyplas

Stack mold

Unscrewing mold

Silicon mold

Metal injection mold(MIM)

Gas-Assisted molding

Our skillful workforce combines with the strict mould fabrication process and quality control secures our plastic molds at high-quality level, we provide not only moulds but also technical support, speed, efficiency & quality.

mold-manufacturing10.jpg

Plastic Mould Making Process

The key point of high-quality injection molds & molding is: Great mold design, high-precision machining equipment, seasoned bench workers and a good management team. In HanKing Mould Shenzhen Songgang factory, we have them all. Our 45+ tooling engineers are very experienced in Europe Tooling Standard and American. We have a very professional plastic injection mold fabrication  , welcome to consult us.

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a chinese plastic injection molding companies in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic injection tooling company, offering custom plastic injection molding service, plastic molding manufacturing and other mould making services.

Following the concept of customer first, HanKing Mould dedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding china manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.

If your birth date is between February 20 and March 20, your constellation is Pisces. Your sunstone is amethyst. This is a clear quartz gemstone!

When winter slowly makes way for the budding spring, this represents the Zodiac Pisces. The symbol is that two fish swim in opposite directions to each other. This symbol illustrates the conflicting emotions and goals of problem handling.

Things to know about Pisces

Pisces people like to make friends and be around them. They often put their friends' needs ahead of themselves. If a friend is suffering, a Pisces person will also make friends suffering their own and suffer from them. Gift-giving is one of their specialties because they like to make people feel great and loved. They don't care much about money, but they really care about their dreams and goals. They are very successful in business arts, music, marketing, and drama. When others are open and friendly to them, Pisces will enjoy it. When someone tells them a story about human suffering, it touches their hearts and makes them really feel. That’s how they can be so sensitive. If a Pisces person is knocked down, frustrated, and deals with self-pity, they will restore strength and show the world that they are better than that.

Pisces is a very passionate lover in a romantic relationship, and they really need to feel connected to their partners before they get into something serious. They are attracted to those who need help and suffer. They absolutely love flattery.

Wearing Amethyst

The traditional stone, for those born under the Pisces constellation, is amethyst. Amethyst is a violet color that can be light or dark. It is often called the stone of the bishop. Amethyst symbolizes sincerity and spiritual wisdom. The word "amethyst" is Greek for "not drunk".

The ancient Egyptians wore amethyst to protect themselves from witchcraft, fear, and evil. Nowadays people use amethyst to treat breathing problems and keep the air at home clean. The biggest thing Amethyst protects a person from alcohol and drunkenness. It is also thought to prevent poisoning. When you feel overworked or stressed, use amethyst to help you relax and relax and eliminate negative energy. Today, many people find amethyst stone to build trust.

Chromite, sugilite, and fluorite are also found to be the best stones in Pisces. If you don't really like amethyst, try other crystals.

As an Aquarius born under the sun, crystals can be a big part of your life. Try picking one to see what impact or change it can make in your life and work. We have clear crystals for sale, welcome to buy.

Aquarian women's lucky stones are Turquoise, Moss Agate, Sugilite, Lapis Lazuli, Jasper, Amethyst, and Garnet. Those born under the Aquarian moon star will find the sapphire a lucky gem. This kind of stone helps Aquarians experience the mysterious power of stone throughout their lives.

Who Are Aquarians?

Although Aquarius's name contains "aqua," it is actually the last air sign of the zodiac. The representative of Aquarius is the water bearer, the mystical healer, who gives water or life to the land. Therefore, Aquarius is the most humanitarian constellation. These revolutionary thinkers enthusiastically support the "power of the people" with a view to changing the world through radical social progress. Every Aquarian is an inner rebel: these air signs despise authority and anything that represents the norm. Free and unrestrained and eccentric people, usually through their alternative fashion sensitivity, distinctive hobbies and unguarded the regular attitude to identify.

Blue sapphire - The lucky stone of Aquarius moon sign

The lucky stone of Aquarius moon sign is blue sapphire. This kind of stone will enable the aborigines of Aquarius to experience the mysterious power of stone all their lives. This gem can help them clear the way forward and achieve happiness, success, and prosperity in life. This stone enhances the overall well-being of the Aquarian native. The cosmic rays of the stone help affect all aspects of the native Aquarian. Wear the jewel on the middle finger with the gold ring.

Other Lucky Stones for Aquarius sign

People who belong to this constellation, according to their life needs, can wear the following gem in addition to sapphire, which also depends on the environment they experience.

Aquarian's zodiac includes stones such as amber, garnet, amethyst, mossy agate, opal. In addition to the ecliptic belt stone, turquoise is the planetary stone of Aquarius and Aquarius.

Amber stone: effectively keeps negative energy away from you.

Amethyst: acts as a healing stone. It will help you overcome past inner feelings and sadness.

Garnet: It provides you with health.

Hematite: hematite helps absorb negative energy and calms down when stressed or worried. It boosts self-confidence. This also facilitates the work of the root chakra and helps to convert negative energy into more positive vibrations.

Aquarian Woman's Lucky Stone

For Aquarian women, the more beneficial gems are turquoise, agate, amethyst, and garnet.

Aquarian Man's Lucky Stone

Aquarian men should wear garnet, amethyst, and Jasper. These stones will change your life in a positive way.

Choosing and wearing the right birthstone and other gems associated with your zodiac are important. If the choice is wrong, then the same beneficial gem will destroy your life.

Want more information on real stones and crystals? Please go to our crystal categories page to pick your own lucky stone. If you want to know where to buy polished stones? Please contact us.  

amethyst bracelet

The rebellious period of spring is coming to an end. The unreasonable sudden coldness is really worrying. It is estimated that she thinks that her youth is too short. But it also reminds us that summer is coming! Packing lightly is a good opportunity to show all kinds of customs. However, I want to tell you that wearing gemstones in the twelve constellations is still a little special, and wearing the pair of constellation stones can make you have good luck in the early summer!

Aries, Virgo:

Ruby

Aries and Virgo in summer, of course, the lucky color is red. Although not as refreshing as green, ruby is also called "the stone of love", which represents passion and love and can bring you luck! Legend has it that wearing a ruby ring on the left hand can eliminate bad luck and turn the enemy into a friend. Want to be successful in the love and career field? It’s right to choose it!

Taurus, Scorpio:

Amber

This summer, both Taurus and Scorpio are susceptible to certain external challenges. Amber is regarded as one of the Seven Treasures of Buddhism. It has always been regarded by the Buddhists as an auspicious object. Amber has the functions of calming the mind and helping sleep. With enough sleep and a firm heart, I believe that any challenge will not fail you!

Gemini, Pisces:

Tsavorite

Both Pisces and Gemini are suitable for dressing up as a fresh and clean constellation, green with some literary and artistic colors, refreshing and pleasant, giving people a sense of comfort, and will definitely bring luck to Pisces and Gemini. As the "little freshness" of the garnet family, tsavorite naturally matches your temperament! In addition, it has the health effects of the garnet family to promote regeneration and circulation. With it, Pisces and Gemini must have great luck!

Cancer, Aquarius

Aquamarine

In summer, if you think about the blue sky and the blue sea, when you come into the embrace of this broad blue sky and sea, you will definitely feel better. Cancer wants to have good luck, Aquarius wants to grasp love, and aquamarine is a good choice. Aquamarine is also called "The Stone of the Brave" and is often regarded as a symbol of happiness and eternal youth. Bravely pursue your dreams! Luck and courage will be with you!

Leo, Sagittarius

White crystal

This summer, Leo and Sagittarius need to work hard on money and work, and white can help you sort out your thoughts. The energy of white crystal can make people's mind clear and refreshing, and help to improve work efficiency. With pure energy, the white crystal can also stimulate the potential of these two constellations, and eventually succeed!

Libra, Capricorn

Hibiscus

For Capricorn and Libra, who need love to nourish, the color that most easily brings positive energy to yourself in this summer is pink. The hibiscus stone, which is regarded as the guardian stone of love, emits a pink light and has the effect of increasing opportunities to recognize the opposite sex. Wearing hibiscus can also relieve tension and irritability, and keep people calm. Capricorn and Libra must grasp their happiness! We have stones crystals gems for sale, if you want to know where to purchase crystals? Please contact us.

Rhodonite is a beautiful gem with unique colors and is often used in the design of various types of jewelry. However, not many people know this kind of gem, and not even many people have heard of it. Whether you're a fanatical collector of gems or someone looking for a new piece of jewelry to wear, rhodonite will offer you something.

Let's see what you need to know and then go to our crystal pages to purchase your own piece of rhodonite.

Introduction to Rhodonite

Rhodonite was first discovered in the rural mountains of Russia in the late 19th century. It became a very popular gem in Russia, and that popularity later took place elsewhere in the world. Rhodonite has since been found in Finland, Australia, Japan, the United States, South Africa, and Tanzania. However, Rhodonite is not a common mineral, and these natural resources are not adequately supplied.

Rhodonite is a manganese silicate containing other minerals such as magnesium, iron, and calcium. most rhodonite contains black manganese oxides in the form of dendritic veins that form interesting patterns and substrates on stones, similar to turquoise.

Rhodonite's unique pink color is easy to discern, as not many other gems look just like it. rhodonite is definitely a particularly unique class of crystals in any of your jewelry collection series, used to create exquisitely carved or engraved jewelry.

Rhodonite Meaning

Rhodonite in greek means “rose”, whose meaning comes from the word “rhodon”. Like the color of a blooming flower and sunset, pink symbolizes unconditional love, while Rhodonite radiates the highest level of light in its striking hues, mixed with dark swirls.

In the gem world, the meaning of Rhodonite crystal is precious because of its amazing appearance, like pink marble. Its intense pink contains the shaded inclusions of manganese oxide, endowing it with synergistic properties, combining the cardiac vitality of pink light with the fundamental and central effects of the earth elements.

Use of Rhodonite

If relationships between lovers are in a state of “It’s complicated”, it's time to call on this vibrant red crystal to soothe the pain of the heart with pure love. Known as “rescue stone”, it's one of the most powerful heart stones in the gem world, working as your therapist in couples counseling to bolster feelings of forgiveness and compassion, the essential virtues necessary for unconditional love to flourish. Its powerful heart-based drugs help release your fears, which are sometimes disguised as toxic emotions such as anger, jealousy or resentment. However, when you are exposed to the strong pink radiation of the vibration of love, you will always look at life through rose-colored glasses. With the Rhodonite crystal included in your crystal first aid kit, always look on the pink side of life, even in times of stress and trauma.

Healing with Rhodonite

The Rhodonite crystal is a powerful healing stone that encourages clear communication and is the lifeline of a strong and healthy combination. Meditate with the meaning of the Rhodonite crystal and go deep into the heart to remove the old pattern and reveal the true passion within you. Other heart stones emit a more gentle frequency of love, but with Rhodonite Stone, be ready for a super-charged heart energy shake, it's strong enough to keep you feeling low in romance at any time. Sometimes, love can bring harm, but Rhodonite reminds us that the painful mood is temporary, like a soon-passing thunderstorm. What’s left behind is green leaves soaked in raindrops ready to bloom again.

If you have a conflict with the person you love, please let rhodonite guide you with unconditional love, without expectation and need, leaving your heart open to pure love. With a rhodonite crystal in hand, imagine yourself floating in a giant pink pool. You will be surprised to find that when you remove harmful emotions with real kindness, they soon disappear. After all, pink symbolizes unconditional love and is the best medicine in the world.

Happiness is simple. It's humans that make it complicated. Call on rhodonite to shine a pink ray of light on your heart, to help you open the obstacle of your heart and return your spirit to a natural state of bliss. The human heart has incredible powers, especially when you pass on beautiful and heartwarming corundum crystals to others.

Here's a tough lesson about love: Rose is beautiful and lovely, but it also has thorns. As a reflection of the dualism of nature, Rhodonite's medicine teaches us to forgive and accept when love makes you feel pain. Rose Quartz and Rhodochrosite are good materials to attract love, while rhodonite is all about putting the pieces back together when love is broken. Its energy opens the heart's emotional healing and tells you how to repair heartache through calm meditation and complete acceptance. At the physiological level, the heart is always released, but when it comes to painful emotions, the situation is different. When a heart suffers emotional pain there is only one line between self-preservation and hatred. Rhodonite Medicine teaches us the difference between the two, leads us to release the old emotional trauma, and tells us how to learn from mistakes and move forward from the past.

Rhodonite Properties

Living a purely happy life may seem like a fairy tale, but when you bring the rhodonite crystal properties into your life, it makes your heart grow bigger and wiser and opens up the infinite possibilities of your spirit. If your relationship has reached a deadlock, use the power of the rhodonite crystal to peel yourself off tears and cheer up and turn conflict into love and understanding.

Known for its powerful pure love vibrations, the therapeutic properties of the rhodonite crystals are a good drug for calming nerves. The Xanax of crystal healing, the rhodonite replaces anxiety, fear, and anger with warm, vague emotions such as self-worth, health, and stability, all of which make you feel like the real you. Sit quietly beside the rhodonite stone and let it inject the highest vibration of love into your soul. Let the Rhodonite remind you of offering a chance to happiness because it looks so gorgeous on you.

Want to know which kind of crystal suits you? Go to our raw crystals online page right away, pick and buy your own real natural crystals!

What Are Healing Crystals?

Crystals can improve your status in all directions, reduce or even remove disease symptoms (usually chronic symptoms), and also speed up the pace of change in your life, and make you more inclined to promote health and recovery when you implement your lifestyle select.

Crystal healing is related to change, including how to work with crystal to improve your physical and mental health, emotional state, and spiritual growth. Crystal doesn't make things happen that you or your body can't do, but it can accelerate the results that would otherwise appear.

Clear Quartz

Clear Quartz is known for "The Master Healer". Quartz properties, such as amplification and programmability, are key to manifestation intent. However, the healing properties of quartz will amplify any energy around or put into it, so it is important to make sure to occasionally clean the stone to keep the positive energy.

Amethyst

Amethyst is known as the "The All-Purpose Stone" and is one of the most effective crystals to be worn on the body for healing rituals and to improve the environment. Natural unpolished amethyst or diodes are particularly helpful in placing plants that will not grow or animals that refuse to sit. It also offsets negative earth energy under buildings or anywhere that feels hostile. Amethyst is a special crystal that can be worn on the body for healing rituals and to improve the environment.

Rose Quartz

Rose quartz, "The Love Crystal", with its gentle pink nature, is the stone of the heart, the crystallization of unconditional love. It carries gentle feminine energy of compassion and peace, tenderness and healing, nourishment and comfort. It speaks directly to the heart chakra, dissolves emotional wounds, fears and resentments, and spreads divine love energy throughout the aura. Reawaken the inner love that provides a deep sense of personal fulfillment and fulfillment, and the ability to truly give and receive love from others.

Tiger Eye

The tiger's eye stone is an amulet that brings good luck to the wearer. Tiger Eye is a healing crystal for stress and wealth.

It has the power of concentration, promotes clarity of mind, and helps us to solve problems objectively, regardless of our emotions. Especially suitable for treating psychosomatic diseases and eliminating fear and anxiety. It helps to recognize the relationship between your own needs and those of others. Balancing Yin and Yang, stimulating emotions, stabilizing mood swings, instilling in our willpower, purpose, courage, and confidence, releasing tension.

Tiger eyes treat the eyes, throat and reproductive organs, release toxins, relieve pain, help repair fractures and strengthen the alignment of the spine.

Carnelian

Carnelian for motivation and inspiration is one of the most helpful powerful healing crystals for you to use, especially if you can keep this stone in the three lower chakra areas where it will be most beneficial. Agate jewelry is easy to obtain and would be advantageous if worn as a bracelet or ring, as it will more easily resonate within the lower chakras. Combined with green calcite, it will strengthen the liver and pancreas, gallbladder and kidneys. It brings healing energy to the organs located in the lower body region within the sacral chakra. We have top healing crystals. You can buy healing crystals online.