🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

surgery (2)

The surgical stapler includes the shell, the center rod, and the push tube. A center rod is set in the push tube. On the front end of the center, the rod is equipped with a nail cover. The rear end is connected to the adjusting knob at the rear of the shell through the screw, and on the surface of the shell is equipped with a triggering handle. The triggering handle is movably connected to the shell through a hinge. The main working principle of the surgical stapler is to use titanium nails to disconnect or anastomose the tissue, which is similar to a stapler.

 

 

 

The surgical stapler is characterized in that: a link mechanism is arranged in surgery instruments, three connecting rods are respectively connected with the triggering handle, the inner wall of the casing and the push tube, and the end of the three connecting rods are connected to the same living hinge. The three-link mechanisms of the connecting rod include the power rod, the support rod, and the sports rod; the power rod and the triggering handle are hinged and the support rod and the housing are connected by a living hinge; the sports rod and the push tube are connected by a living hinge. The practical and new-model stapler has advantages like simple structure, convenient operation, and strong stability. The connecting structure of the ring knife and the push rod of the digestive tract stapler includes the pushrod and a ring knife fixedly connected with the pushrod. On the outside of the ring knife stated above, are set with the pad cutter rings arranged in the circumferential direction. The end of the ring knife is embedded in the pushrod. Because the end of the ring knife is embedded on the push rod, the concentricity of the ring knife and the push rod is high. When it is cutting the tissue, the ring knife can sit smoothly in the middle, so that the surgical success rate will be high.

 

Victor Medical Instruments Co., Ltd is a professional firm of auto surgical staplers and minimally invasive surgery equipment, we provide disposable surgical instruments.the-single-use-linear-stapler.jpg?profile=RESIZE_710x

Read more…

Operation Method and Precautions of Stapler

Operation method of the staples used in surgery: An intestinal anastomosis is used to illustrate the use of the stapler. The anastomosis is sutured in the proximal intestine, placed in the staple holder and tightened. The stapler is inserted from the distal end, the central piercer of the stapler is threaded out and articulated with the central rod of the proximal stapler against the staple holder, and rotated close to the distal and proximal bowel walls. Adjust the distance between the staple holder and the base according to the thickness of the intestinal wall, generally by turning the hand tighter (with a tightness indicator pin on the handle).

 

Squeeze the closing anastomosis wrench to tighten the anastomosis, and the sound of the sound indicates that the cutting anastomosis is complete. Do not withdraw the anastomosis and check to see if the anastomosis is satisfactory and if other tissues, such as the mesentery, are embedded. After being dealt with accordingly, the anastomosis was unscrewed and gently pulled from the distal end to check for the integrity of the distal and proximal bowel resection rings.

 

Precautions for use of the stapler

 

(1) Before the operation, check whether the ruler and 0 scales are aligned, whether the assembly is correct, and whether the push-piece and tantalum nail are missing. A plastic washer should be installed in the resistor.

 

(2) The broken end of the intestine to be anastomosed should be fully free and stripped at least 2cm.

 

(3) The distance between the stitches of the purse suture should not exceed 0.5cm, and the margin should be 2~3mm so that too much tissue is easy to embed in the anastomosis and hinder the anastomosis. Be careful not to omit the mucosa.

 

(4) Adjust the spacing according to the thickness of the intestinal wall, with 1 to 2 cm being appropriate.

 

(5) Check the stomach, esophagus, and other adjacent tissues before hitting to prevent clamping into the anastomosis.

 

(6) The cut should be made quickly, and pressure should be applied at the end to make the staple into a "B" shape.

 

(7) Exit the surgical stapler gently and check whether the incised tissue is a complete ring.

Victor Medical Instruments Co., Ltd is a professional firm of auto surgical staplers and minimally invasive surgery equipment, we provide open surgical instruments.laparoscopic-surgery-products.jpg?profile=RESIZE_710x

Read more…

🔥Christian Music News