Blogs/News/PSAs

The existing laser technology has always had a short board, which can only emit light of a single wavelength or narrow band. How to expand the frequency of the laser forming ultra broadband, super straight, ultraviolet, visible and infrared wavelengths of coherent white light laser, is still a human unfulfilled dream, it is a worldwide problem of science and technology. This is because the laser optics is composed of optical resonator, gain medium and pump source. The wavelength of the laser is determined by the energy level structure of the atoms, molecules or ions in the gain substance.

Because the natural laser crystal material has a great limitation on the gain frequency range and gain bandwidth, the laser can't produce any wavelength of laser.

Will the perfect white laser be created? What changes and developments could it bring to the application of lasers?

1. The sun light

It is known to all that all things grow by the sun, and the sunlight brings light and heat to the earth. The familiar sunlight is a kind of white light, and its spectrum covers ultraviolet - visible - near infrared - mid-infrared bands, as shown in figure 1, In the visible light band (400-700 nm), the radiation energy is strongest, covering seven colors of red, orange, yellow, green and blue, and continuous distribution and transition in the spectrum. Because the sun is white, rainbows are often seen in the sky after rain, or the sunlight passes through a glass prism through seven colors of light (figure 2). This is a common experience in everyday life.

One of the things that people are less familiar with is that sunlight is a completely incoherent light. In terms of spatial coherence, the sunlight cannot be straight and highly divergent. In terms of temporal coherence, there is no phase correlation and locking between different colors of sunlight. So sunlight can only be used to generate energy for heating, water heaters, solar cells and so on.

But the use of modern science and technology, such as the use of sunlight to transmit information, seems to be out of the question.

laser

The spectral distribution of sunlight. The spectrum of solar radiation including the sun itself, the spectrum of sunlight entering the earth, and the spectrum of sunlight reaching the sea level due to the absorption of atmospheric water and carbon dioxide.

2. The advantages of light and its application

White light laser light source, short wave laser light sources and continuous laser light compared with the ordinary white light, such as sunlight, incandescent lamp, white LED lamp, etc.), it has the advantages of high brightness, high peak power, wide frequency range etc. In the fields of scientific research, defense military, lighting, communication technology, information technology, industrial production, biomedicine, environmental detection, etc.it got a lot of attention.

White light, as a kind of new laser light source, it has a variety of advantages of good directionality, high energy density, super continuous spectrum, great bandwidth, the center of the flexible wavelength, high degree of coherence time and space. This will greatly expand the function and application scope of laser technology. The white light laser or the solar laser is the completely coherent light, not only the height of the laser beam, but also the very small region. Different color between amplitude and phase locking completely, by regulating the amplitude and phase, it can change the time of laser pulse shape follow one's inclinationsly, and produce very short pulse width (femtosecond and the femtosecond laser pulses. Such a solar laser will have the potential to realize the focus and convergence of light energy in space and time. It releases energy in small areas and very short periods of time to form extremely high instantaneous power density.

Our client base spans across defense, security, bioengineering, pharmaceutical, institutional, industrial, and research industries worldwide. We specialize in DFM (optical design manufacturing) input from rapid prototyping to volume production. Our comprehensive metrology coupled with cost-effective philosophy can help Hyperion customers obtain a competitive edge in the global market.

Car drive belt is important part of automotive motor, and the function of automotive motor belt is to drive. If the belt breaks, the engine will stop operating out of electricity, and in severe cases, the engine will be damaged. The automotive belts wear rate of automotive motor is high. When there are core fracture and groove section cracking defects, the cover of the belt separated from the drawstring and other problems, the belt should be promptly replaced. Normally, the replacement time is indicated in the maintenance manual when purchasing the car. The automotive belts replacement method of automobile motor generally requires a professional to operate.

replacing a belt on a car

Your vehicle consists of several different complex parts, such as a serpentine belt, which is difficult to understand unless you are a mechanic. But rest assured, Taizhou SHANJING auto parts limited.

CAR TIMING BELT REPLACEMENT COST GUIDE

Most cars have an interfering engine, which means that there is very little clearance between moving parts, and if time is exceeded, they will hit each other. Timing belts connect the crankshaft

SNOWBLOWER DRIVE BELT REPLACEMENT

This article provides step-by-step guidance to replace the drive belt (or v belt) on the snow blower. The most common reason for engine drive belt replacement cost is if the wheel or auger does not turn

HOW TO REPLACE THE LAWN MOWER DRIVE BELT

If your lawn is too small to use a riding mower, but too big to use a manual push mower, then your best choice is to use a self propelled lawn mower, which can help you in the yard walk around without

How long we should be replacing a belt on a ca

1.When we check the automotive belts, if we find defects in the core fracture and the groove fracture, then we need to replace it immediately and estimate the car fan belt replacement cost .

2.When the cover of the belt is separated from the pull rope, or when the pull rope is loose, we have to change the belt.

3.When the belt is placed on the pulley, there should be a gap between the inner diameter of the belt and the bottom of the pulley slot, and if there is no gap, we must also replace the belt

Car belt of the motor is made of rubber, and the belt wear rate is high. Because most belts on the car use the of material rubber, so the auto belt inevitably wears away and ages during long periods of high temperature work. So generally speaking, the car belt replacement time is regulated by car manufacturers,and there is some introduction in the vehicle maintenance manual .

According to the general car maintenance standards, after running about 60,000 to 80,000 kilometers the belt should be replaced, and some belts can be replaved after driving 80,000 to 100,000 kilometers.

How to replace a new belt for car

1. loose the motor fixing screw and the belt tightness adjusting screw.

2. push the generator against the engine to make the distance between the pulley the shortest, and then straighten the belt sleeve.

3. adjust the tightness of the belt to fit, and tighten the engine fixing screw and adjusting screw.

Car generator belt installation needs professional tools and technical advice from professionals to operate. Self-installation by car owners may cause damage.

How to maintain the drive motor belt

1.After driving a certain distance, you should properly adjust the tightness of the generator belt. Fix the calibration screws as required to ensure that the screws on the foot frame of the generator maintain a certain tightness.

2.You should pay attention to the degree of bearing wear. If insufficient lubrication is found, you may add a few drops of oil from the mouth of the oil cup. Pay attention not to let the oil enter the rectifier, otherwise it will affect the effect of power transmission.

3.Rectifier scale can be polished with fine sand cloth.

4.Uneven brush contact surface can be leveled with fine sand cloth. Spring is not elastic enough, brush wear too much, both situations should replace new parts. The brush is too short and without breakage. The gasket can be plugged into the support to make it close to the rectifier.

UV-VIS spectrophotometer can be used for basic testing in food hygiene, pharmaceutical analysis, teaching, research and other fields. The instrument has the advantages of high accuracy, good stability and strong durability.

UV-VIS Spectrophotometer Features:

It has a powerful instrument automatic control system. It can automatically set the wavelength, automatically adjust 0%T, 100%T, T/A error-free conversion and A, T, C direct reading function. It also features highly automated instrument self-diagnostics and calibration recovery to ensure instrument stability and reliability.

The performance of the instrument is excellent. Use advanced microcomputer technology and electronic control system to optimize traditional optical path design and structural design. The detectors, gratings, etc. all use imported parts, which greatly improve the stray light, luminosity precision and stability of the instrument.

It is simple to operate and highly scalable. The function menu has an operation information prompt, and the user's operation is easy. The memory capacity is large, and can store up to 200 standard curves and 500 sets of experimental data. It is optionally equipped with a built-in miniature thermal printer that prints standard curves and test results directly. It uses a dedicated PC counter-control workstation with USB transfer online.

It is fully functional. In addition to photometric measurement, it also supports quantitative analysis, automatically establishes a standard curve, and selects first-order and first-order zero-crossing linear regression methods. The standard curve can be stored for future test calls.

Shenzhen XZBELEC Inst. & Eqpt. Co., Ltd company is established in 2011, Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd is a professional enterprise of instruments and meters.

1. Easy to use: Simply connect the new sensor, and the host engine will automatically configure it without entering new programs or calibration factors. The detector settings and algorithms are compressed in the device. The detector is ready to use out of the box.

2. Automatic unit conversion: The results are displayed in a variety of commonly used units. Simply click the key to change the unit selection. Common units and conversion algorithms can be programmed on the detector as required.

3. Anti-interference ability: The signal amplification part has been made in the metal box of the detector. The signal is transmitted to the host through a cable. The cable is protected and has high anti-interference ability to EMI and ESD.

4. Remote use: Via a cable of 1 or 5 meter, it is convenient to measure when the designated place cannot be reached. PMA2100 can connect 2 detectors at the same time.

5. Dose synthesis: Dose synthesis can be done remotely or through the keyboard.

6. Traceability: Each data sample has a series of auxiliary information: date, time, detector type and serial number, the unit currently used, the scale factor set by the user, the date of the detector calibration, and a series of signs that indicate the status of the instrument.

7. Data recording: The host engine can store up to 1024 data. The memory can be started manually or run automatically according to the interval (1 minute-2 hours) set by the user. The unified record structure is suitable for singular data management of all detectors.

8. Computer interface: It can be connected to a computer through a serial interface to transfer the collected data. Download, display and save data using the HyperTerminal in the window.

9. User-defined alarm: The independent alarm function of each detector can monitor the instantaneous value or comprehensive measurement. The alarm settings are stored in the detector.

Shenzhen XZBELEC Inst. & Eqpt. Co., Ltd company is established in 2011, Shenzhen xinzhibang Inst. & Eqpt. Co., Ltd is a professional enterprise of instruments and meters.

Led Bluetooth Mirror

Have you imaged that in a beautiful morning, listen to your favorite song or radio in the front of your stylish mirror? With spremium’s Led Bluetooth Mirror, we can make your dream come true.When you light up bluetooth mirror, our Bluetooth mirrors allow Smartphone and table devices to be connected to play your favorite music. Not only that, all of our Bluetooth Mirrors has stereo speakers built within them. You can easily answer your phone through your mirror.

LED Bluetooth Mirror Function

All units comes as standard with Bluetooth connectivity and illuminated strips. Standard mirror also come with demister to keep your mirror fogless. Time and temperature display will also give your convenient in a busy day. As well as the general features discussed, our Bluetooth mirror is controlled by simple finger touch, meaning you can quickly and easily change stations or songs to your liking.

All of our Led Bluetooth Mirrors are very simple, but elegant in design. All the function including Bluetooth, led light, demister, clock and temperature can be controlled in same place at the underside of mirror. With its full closed aluminum back, these products come in varying sizes to be able to fit a range of different rooms including bathroom.

Why Trust Spremium

All of our Led Bluetooth mirrors made by 5mm cooper free mirror to avoid black edge and black spot. It have IP67 certificate for led strips, that means you can put it in the water and it will still shine. And also have CE certificate for Led driver. We also offer free two years warranty to make our customer believe that our products are exceptional too.

We have built our reputation here at spremium on high quality cooper free led bathroom mirror and dedicated customer service. We offer 2 years warranty for complete mirror, because we want you to believe that our product are exceptional too. If you want high quality, modern mirrors at incredibly affordable prices, if you are looking for a reliable, responsible bathroom mirror manufacturer in China, spremium should be your only choice. For more information, please feel free to contact us.

The 630 watt cmh grow light has intelligent ignition control. The integrated ignition control software will completely balance the electric traction by igniting one lamp at a time to prevent surges and spikes that may overload the main circuit and interrupt the system of the trip circuit. In order to further improve efficiency, this function is activated with our "soft start technology".

This full-circuit protection system of the 630 watt cmh grow light has a series of faults, such as open-circuit protection, short-circuit protection, over-voltage protection, under-voltage protection and over-temperature protection. During ignition, the ballast tests the circuit for 3 seconds. Once a fault occurs, the ballast will enter the protection mode to avoid damage to the ballast and the lamp.

The soft-start technology used in the 630 watt cmh grow light prevents the electric current from rushing to the lamp and the lamp from overloading to prolong the lamp's service life. When the ballast starts from cold, there will be a fixed delay of 3 seconds before ignition. After ignition, a series of random 0-2 second delays occur before the full brightness is achieved in about 3-5 minutes. Soft start technology is also activated when increasing and reducing the power of the lamp using the "intelligent step" function.

This 630 watt cmh grow light is equipped with a heavy-stroke system to prevent the ballast from re-striking the heat lamp after power failure. If a hot lamp is detected, the hit will be delayed by 60 seconds until the lamp cools enough to re-ignite. Then the ignition control is controlled by "intelligent start ignition control" and "soft start technology" software.

AZ Lighting is a professional supplier for grow light products featuring complete fixtures, electronic ballasts & lamps. With a factory of 15 years experience in manufacturing grow light products, AZ Lighting has been dedicated in providing cost-effective grow light that have undergone strict quality control procedures.

The 630 watt cmh grow light is a new lighting source which combines the advantages of ceramic tube technology of quartz metal halide lamp and sodium lamp. The 630 watt cmh grow light has excellent color rendering to make the color of goods more realistic; anti-ultraviolet function can make your goods more outstanding; 630 watt cmh grow light has two different colors, giving you more choice; stable color creates a uniform color, and uniform brightness of the space environment saves cost; the long life of the 630 watt cmh grow light can be effective in reducing maintenance costs; high light efficiency improves energy efficiency. All kinds of ceramic metal halide lamps, including 630 watt cmh grow light, are praised as "the king of lighting" by the international lighting industry. They conform to the requirements of energy-saving lighting products in the world today and are widely applied to showcase lighting, shopping mall lighting, automobile exhibition hall lighting, key display lighting and Commercial Street lighting, which have a broad prospect.

AZ Lighting is a professional supplier for grow light products featuring complete fixtures, electronic ballasts & lamps. With a factory of 15 years experience in manufacturing grow light products, AZ Lighting has been dedicated in providing cost-effective grow light that have undergone strict quality control procedures.

Pyroelectric sensor is a kind of sensor, also known as human body infrared sensor and human motion sensor module, used for life burglar alarm, visitor notification, etc., the principle is to release the charge through the amplifier into a voltage output.

The piezoelectric ceramic dielectric can maintain a polarization state after being polarized, which is called spontaneous polarization. Spontaneous polarization decreases with increasing temperature and the temperature drops to zero at the Curie point. Therefore, when the material is exposed to infrared radiation and the temperature rises, the surface charge will decrease, which is equivalent to releasing a part of the charge, so it is called pyroelectric. The discharged charge is converted to a voltage output by an amplifier. This is how the pyroelectric sensor works.

When the radiation continues to act on the pyroelectric element and its surface charge is balanced, the charge is no longer released. Therefore, the pyroelectric sensor cannot detect constant infrared radiation.

Working principle: The human body has a constant body temperature, generally at 37 degrees, so it will emit infrared rays with a specific wavelength of about 10UM. Passive infrared probes work by detecting infrared rays of about 10UM emitted by the human body. The 10 UM infrared rays emitted by the human body are enhanced by the Philippine filter and collected on the infrared sensing source. The infrared sensing source usually adopts a pyroelectric element, which loses the charge balance when receiving the temperature change of the infrared radiation of the human body, and discharges the charge outward, and the subsequent circuit can generate an alarm signal after being detected and processed.

Pyroelectric effect: When some crystals are heated, an equal number of oppositely charged charges will be produced across the crystal. This phenomenon of polarization due to thermal changes is called pyroelectric effect.

Fresnel lens: According to the Fresnel principle, the Fresnel lens is divided into two types: refractive and reflective. Its role is to focus and refract (reflect) the pyroelectric infrared signal on the PIR. Second, the detection area is divided into a number of bright areas and dark areas, so that moving objects entering the detection area can produce a modified pyroelectric infrared signal on the PIR in the form of temperature changes, so that the PIR can generate a change electrical signal. The sensitivity of the pyroelectric human body infrared sensor (PIR) is greatly increased.

Senba Sensing Technology Co.,Ltd., was founded in 2005, with the focus on producing the top quality pir sensor analog. If you want to know more details, just feel free to contact us!

We have burglar alarm pir for sale!

Security anti-theft solution

With the continuous improvement of people's living standards, people's demand for family life comfort is getting stronger and stronger. People tend to consider the safety of home in the first place. This kind of smart home mainly consists of visual intercom door machine and various detectors. The composition is connected to the smart home management machine. Once the alarm button is triggered, the smart home receives the signal and performs as an alarm to remind the user.

The highest level of consumer acceptance in the smart home market is undoubtedly the security system, a complete security system including alarm system, video surveillance and video intercom.

After years of experience, the solution is applied to human body infrared sensor products. It is strongly recommended that you use the following models.

Senba Sensing Technology Co.,Ltd., was founded in 2005, with the focus on producing the top quality photoelectric components. If you want to know more details, just feel free to contact us!

Overview

Senba mini pir motion sensor    with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) and 2.4G high frequency interference. Senba PIR sensor suppport delay time, sensitivity adjustable, lighting adjustable.

Features of small pir motion sensor

High sensitivity and excellent S/N ratio

Enhanced immunity to RFI (Radio Frequency Interference)

Slight movement can be detectable

High immunity to external noise (vibration, etc.)

Technical Data of small movement sensor

1.Maximum Ratings

2.Working Conditions (T=25°C, Vdd=3V，Except other requirements)

Applications

Wireless Devices/Mobile Equipment

Wireless occupancy sensors (powered by PV cells or battery)

PC and smart phones

Commercial & residential lighting fixtures

Video intercoms

Vending machines

FAQ

1.Can PIR sensor detect cars?

PIR-based Motion Detection: In this case motion is detected by means of a PIR sensor, a passive infrared sensor. This sensor detects emitted infrared energy from objects (humans and animals, but also cars) in the form of heat.

2.Do PIR sensors work in the dark?

Yes, motion sensors work in the dark. The way that a motion sensor detects movement has nothing to do with how light or dark it is in the immediate area. ... Since infrared energy is present and can be detected regardless of the amount of light in the environment, a PIR motion sensor will work just fine in the dark.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

What is cds photoresistor?

Overview

G2X2 is quad elements type products. With same horizontal and vertical detection angles. It is widely used in ceiling light.

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.

Features

Quad Elements

Same horizontal and vertical detection angles

Slight movement can be detectable

Applications

Ceiling Lighting

security systems

FAQ

1. What can trigger a PIR sensor?

The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.

2. Do PIR sensors work in the dark?

Yes, motion sensors work in the dark. The way that a motion sensor detects movement has nothing to do with how light or dark it is in the immediate area. Since infrared energy is present and can be detected regardless of the amount of light in the environment, a PIR motion sensor will work just fine in the dark.

Senba is one of the most professional PIR sensor manufacturers for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

Overview of 1000W Grow Light Electronic Ballast

Drives HPS and MH 1000W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

The Details of 1000w Digital Ballast

1. Converts between HPS and MH lamps automatically by microprocessor
2. Adjustable knob for easy switch to different powers as needed
3. Ventilation opening for heat dissapation
4. 8 Feet heavy-duty power cord included

The Advantages of 1000w Electronic Ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan
2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch
3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max
4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

The Specification of 1000W Grow Light Electronic Ballast

Installation & Application Notes of 1000W Grow Light Electronic Ballast

1. Max.allowable case temperature: 75°C/167 °F.
2. Ambient Temperature: -20°C~ + 40°C/-4°F ~ +104°F.
3. Max.Humidity: 95%.
4. Ignition voltage is 5kV.
5. Remote Mounting: 15m/50ft.

Overview of 1000W DE Grow Light Fixture

Drives a double ended HPS or MH 1000W Lamp

Dimmable electronic ballast: 600W/750W/825W/1000W/1150W

Works on 120V-240V with 208V/277V/280V/347V/400V/480V for choice.

High frequency, up to 120kHz

Warranty: 3 years

ETL Certified

The Details of 1000W DE Grow Light Fixture

Adjustable knob for easy switch to different powers as needed

German aluminum, high efficiency refelector with 98% reflectivity

VS Lampholder featuring high quality and long lifetime

LED status indicator with three colors

Suitable for DE HPS & DE MH lamps

The Advantages of 1000W DE Grow Light Fixture

Very low heat dissipation and optimal cooling

No acoustic resonance

Compact size and light weight to save shipping cost.

The Specification of 1000W DE Grow Light Fixture

The Application of 1000W DE Grow Light Fixture

Greenhouse for plants like flowers, fruits and vegetables etc. It provides supplemental lights for plants for faster growth, more yield and better quality. Indoor Gardenning in hobby market, it helps accelerate plants  growth and improve their quality.

We have 600 watt ballast for sale!

Overview of 600 watt digital ballast

Drives HPS and MH 600W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

The Details of 600 watt ballast

1. Converts between HPS and MH lamps automatically by microprocessor
2. Adjustable knob for easy switch to different powers as needed
3. Ventilation opening for heat dissapation
4. 8 Feet heavy-duty power cord included

The Advantages of 600 watt grow light ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan
2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch
3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max, quality
4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

The Specification of 600W Grow Light Electronic Ballast

Installation & Application Notes of 600W Grow Light Electronic Ballast

1. Max.allowable case temperature: 75°C/167°F.
2. Ambient Temperature:-20°C~ + 40°C/-4°F ~ +104°F .
3. Max.Humidity: 95%.
4. Ignition voltage is 5KV.
5. Remote Mounting: 15m/50ft.

Smart homes have flourished around the world and have become the mainstream of development in the 21st century. Smart home is a product of modern building technology, modern communication technology, modern control technology, modern instrumentation technology and modern computer technology. In recent years, with the rapid development of computer network communication technology and the improvement of people's living environment requirements, the concept of "intelligence" has also been introduced into the construction of housing. "Smart" now brings a lot of delusions to the industry.

Smart homes are based on housing, as long as they are residential, hotels, office buildings, enterprises, factories, schools, etc., are our target markets.

The pir sensor home automation seems to be far away from our lives, just a performance in high-tech exhibitions, or a home decoration that the rich show off to show off wealth. In fact, in recent years, smart homes have begun to step into more and more ordinary families. A complete intelligent security system using pir sensor   generally includes several subsystems such as security, telephone, audio and video, air conditioning, lighting, etc. The price can be accepted by consumers. The owner can choose to install subsystems according to their own needs and preferences to meet their own needs. Various needs at home. With the rapid development of the Internet of Things, smart homes have entered the ordinary people's homes, and the intelligent life style of film bridges is no longer far away.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

Overview of Ceramic Metal Halide 315w

Specially designed for CMH 315W lamp

Runs on 120V/240V

High efficiency electronic ballast

High output and improved spectrum

Warranty: 3 years

UL & ETL Certified

The Details of 315W CMH Reflector Grow Light Fixture

Imported German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with ceramic metal halide 315W lamp that offers full spectrum light, much closer to natural sunlight than the lights delivered by normal HID lamps.

315W cosmo Lampholder

Matched power cord included

The Advantages of 315W Grow Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

The Specification of 315W CMH Grow Light Fixture

Non contact type temperature measurement solution

The traditional body temperature measurement is a contact measurement using a mercury thermometer, which has the advantages of stable performance and small error, but has the disadvantages of long measurement time, high risk of cross-contamination, and easy to cause mercury poisoning due to glass breakage.

Infrared ear thermometer is the most commonly used thermometer. Non contact temperature measurement sensors  can test body temperature with a slight amount of forehead or ear, and it can also prevent body infection. Infrared ear thermometer collects infrared radiation from ear cavity and tympanic membrane through infrared sensor. And converted into a digital signal, the main control CPU unit converts the digital signal into a temperature value and displays it on the LCD screen. Compared with mercury thermometers, infrared ear thermometers have the advantages of high precision, high resolution, fast measurement speed, easy operation, safety and comfort.

Now the country is also banned from mercury production. I believe that the application of non contact type thermometer   will become more and more extensive in the future.

Senba is one of the most professional PIR sensor manufacturers for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.

Performance Data of 315W Ceramic Metal Halide Lamps

Electrical Characteristics of 315W Ceramic Metal Halide Lamp

Physical Description of 315W Ceramic Metal Halide Lamp

The Application of 315W Ceramic Metal Halide Lamp

Ideal for horticultural lighitng, good for both vegetative and bloom stages.

Security anti-theft solution

With the continuous improvement of people's living standards, people's demand for family life comfort is getting stronger and stronger. People tend to consider the safety of home in the first place. This kind of smart home mainly consists of visual intercom door machine and various detectors. The composition is connected to the smart home management machine. Once the pir sensor security system    button is triggered, the smart home receives the signal and performs as an alarm to remind the user.

The highest level of consumer acceptance in the smart home market is undoubtedly the security system, a complete security system including alarm system, video surveillance and video intercom.

After years of experience, the solution is applied to human body infrared sensor products. It is strongly recommended that you use the following models.

Senba is the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&D center, there are digital type and analog type, dual elements and four elements for you choose. The market cover domestic market, Korean, Amertica, Turkey and Europe.If you are looking for burglar alarm pir sensors, just contact us!

Overview of 1000W Internal Reflector Grow Light Fixture

Specially designed for internal reflector lamps, 600W & 1000W for options

Runs on 240V and 400V

with high efficient 1000W electronic ballast

Warranty: 3 years

The Details of 1000W Internal Reflector Grow Light Fixture

HID Lamp with high efficient internal reflector

Two types of base for option: fixed PGX base and rotable EX40

High efficient electronic ballast

Protection cover from contamination and oxidations.

Matched power cord included.

The Advantages of 1000W Internal Reflector High Pressure Sodium Grow Light Fixtures

Wide light distribution

The lamp with internal reflecdtor with up to 15% more light

No acoustic resonance

The Specification of 1000W Internal Reflector Grow Light Fixture

The Application of 1000W Internal Reflector Grow Light Fixture

Greenhouse for suplimental light for vegetables and flowers. It's significant for boosting yield and quality improvement.