Blogs/News/PSAs

STANDING MAT 1#:

Humans did not evolve on a completely flat surface. Our feet, like our bodies, are meant to move. Therefore, our company has developed a standing mat that conforms to the terrain, stand mat 1#.

The unique peaks and troughs will make you more willing to move around, build muscles, relieve posture fatigue, activate blood flow and bring more energy to your work. Use the front corner of the foot pad as the rest of the foot, the edge for your finished power position, the back of the foot pad for a good stretch, and the ball in the center for a recharged foot massage.

The pads can be worn in shoes, barefoot or socks.

STANDING MAT 2#:

Although we have a mat that provides a contoured standing surface, and a balance plate that allows you to swing from side to side, some people just want some simple cushioning when it comes to standing. The lightweight, understated, minimalist stand mat is made of non-toxic, phthalate free polyurethane, and its simple look is far from simple. Standing on it, you can feel the difference, especially around your knees and hips.

Balance Boards :

In the process of following the principle that exercise is healthy, we developed the anti fatigue balance board. The dynamic experience of standing can bring you more pleasure and relaxation. And it's not designed to get you moving, it's designed to allow you to naturally shift your weight from one side to the other and keep your blood flowing.

It will be a perfect experience to match your lifting desk.

Anti Yellowing Agent Usage

In the process of storage and transportation of nylon light fabric, local slight yellowing often occurs, which affects the appearance and quality of fabric. And in this situation, anti yellowing agent is required in the textile processing.

Cause Analysis

1. The plastic packaging bag contains contaminants and BHT (butyl hydroxy phenyl ether), which make chemical reactions with chinlon, resulting in color variation and yellowing.
2. Select yellowing resistant agent to dip or pad.

Anti yellowing agent used in Nylon fabric processing

Nylon is a preferred fabric for high-grade swimwear, sportswear, casual wear and underwear. White or light-colored fabrics are very easy to produce yellow in high-temperature treatment (such as hot stereotypes, high-temperature die, etc.) or in the transport, storage process, so the nylon fabric must be yellowing-resistant finishing.

The PH value of additive solution has a great effect on the effect of yellowing resistant agent, and the stronger the PH value is, the better the effect of the phenol-yellowing is. This is due to the difference in the charge of polyamide fiber under different PH conditions. The stronger the acidity is, the stronger the positive resistance is, and the stronger the adsorption ability of the anion-type yellowing resistant agent is.

The treatment bath temperature on yellowing resistant of yellowing resistant agent also has a certain effect. Under the same conditions, when the temperature of the treatment bath is 70~80℃, the effect of anti-phenol yellowing is 4-5. When the yellowing resistant was processed, the treatment time was short, and the anti-phenol yellowing agent could not be fully absorbed by the fabric, so the effect is reduced; when the treatment time is too long, it is unfavorable to improve the production efficiency. The treatment time of yellowing resistant agent used in impregnation process is 20 min.

Effect of washing water against the effect of yellowing resistant. Washing resistance is one of the criteria for evaluating the effect of anti-phenol yellowing. If after a certain degree of washing, the effect of the yellowing resistant agent has not decreased significantly, and the effect of yellowing resistant is still at 4, then it meets the dyeing and finishing requirements of high-grade nylon fabric.

We have specialized in textile chemicals and auxiliaries for more than 10 years. 

Definition of anti staining agent

Anti staining agent is a substance that can prevent dyes from coloring in fabrics or in the dyeing and printing process.

Classification of anti staining agent

Anti staining agents can be divided into two categories according to their mechanical and chemical properties. The former has the wax, oil and some inorganic compounds, the latter including acids, bases, salts, oxidants, reductants, etc. There is one special anti staining agent, such as phenylhydrazine sulfonic acid. Some of them are coated on fabrics to prevent contacting with fiber, such as paraffin, turpentine, starch, clay, and barium sulfate. Some anti staining agents take functions by working with the dyes, to invalidate the dyes or to produce precipitates, such as lime, lead sulfate, aluminum sulfate, calcium phosphate, etc. There are also anti stain salts.

Advantages of anti staining agent

1. Good anti staining effect, and give the original white cotton fiber anti-indigo or vulcanized dyestuff stain
2. Excellent dispersion performance. It can be used in the same bath with mycin and most other auxiliaries
3. Stable during the process of acid or neutral stone washing

HT Fine Chemical Co., Ltd focuses on textile auxiliaries chemicals, as an anti staining agents manufacturer, with years' production and exporting experience and long term cooperation with colleges and institutes, it’s qualified to supply high quality and large amount of chemicals for large scale textile processing companies worldwide.And we provide anti-staining agent for sale.

With the deepening of isolation research and the development of isolation technology, nonlinear isolators suitable for various occasions have emerged. Laminated springs for the automotive industry are widely used in China. The principle is to use the dry friction between the steel plates to reduce the vibration and impact caused by the unevenness of the road. There are metal conical coil springs for the civil industry, as well as air springs.

During the entire deformation process of the wire rope shock mounts, sliding friction will occur between each wire rope, which consumes a large amount of energy and has a high equivalent damping ratio. Moreover, the wire rope anti vibration mounts exhibit nonlinear softening characteristics in a large deformation range, the stiffness decreases as the deformation increases, and the vibration isolation rate increases. Therefore, the good broadband isolation performance of the wire rope isolator for vibration damping is especially suitable for the application of vibration and shock environment isolation.

The wire rope shock mounts have only been developed in the last 30 years. Compared with the above-mentioned isolators, it has four distinct advantages:
①Nonlinear soft characteristics;
②Multi-directional isolation, high damping ratio;
③Corrosion, high and low temperature resistance;
④Compact structure and light weight.

At present, the common wire rope anti vibration mounts have several types of spiral, arch and ring. But in either case, they are made of stainless steel wire rope wound or bent. Their common advantage is the three-way protection of the equipment, reliable operation in high temperature and harsh environments, wide load range, unlimited storage period and service life. In terms of impact resistance, it can achieve maximum impact attenuation in a minimum space, and its vertical allowable deformation can reach 40~60% of the height of the vibration isolator. In foreign countries, they are used in the transportation of some equipment to replace the impact-resistant packaging of raw plastics and rubber. Rocket and missile transport vehicles also use it. In terms of ships, it passed the tests of light impact machines, heavy impact machines and floating impact platforms to meet the requirements of MIL-S-901 and MIL-STD-167. The wire rope isolator has excellent durability and fatigue. A vibration isolator with a diameter of 2.4 mm has been tested for up to 150 hours and seven million tests at 13 Hz and ±1.5 mm amplitude. The result is safe and sound.

For a 1.5mm wire rope isolators damping with a 1.5mm diameter, a sweep vibration test up to 10KHZ was performed, and the vibration isolation effect was 95%. This proves that the wire rope isolator for vibration damping can isolate small amplitude and structural noise. Wire rope anti vibration mounts are widely used in vibration and shock isolation of instruments, instruments, control boxes, etc., and some of the original rubber vibration isolators have been replaced by wire rope shock mounts.

Hoan is one of the leading wire rope isolator manufacturers in China, Welcome for enquiry.

As the phenomenon of welding spatter is very common, the use of anti-spatter coating for welding is also very extensive. For general structural parts, the type of welding anti weld spatter coating has little effect, as long as it can effectively prevent welding spatter from adhering to the working surface in the welding process. However, for some key products and workpieces, such as high pressure vessels, if the anti-spatter coating contains too many harmful elements, it may cause spot corrosion, intergranular corrosion, etc. It will cause leakage in the subsequent operation of the equipment and lead to malignant accidents.

The selection of anti weld spatter coating also needs to be combined with the whole production process and process method. The process flow and process method mainly depend on the part after welding. At present, the technological process of structural parts is mainly divided into two categories: one is post-processing painting, the other is post-coating processing. If it is painting after processing, it must be cleaned before painting in order to remove rust and spray paint because cutting fluid will be used in the process of mechanical processing.

The type of anti weld spatter coating used in welding of the structure parts of the processed coatings has little effect. Even if oil-based anti-spatter coating is used, it can be completely removed by the cleaning process before painting, and the quality of the spray paint will not be affected. If the coating is processed or not processed, the use of oil-based anti weld spatter coating will bring some problems. Direct shot blasting treatment of structural parts can remove surface rust. But it is difficult to remove oil-based anti weld spatter coating coated on the weld seam of the workpiece. It will adsorb on the surface of the pellet, which causes pollution on the surface of some workpieces with oil stain, seriously affecting the adhesion of the paint film. In order to prevent the influence of oil-based anti-splash coating on subsequent painting, it is necessary to increase the cleaning process and carry out the necessary cleaning of the workpiece. Increasing the cleaning will bring a series of problems, such as production area shortage, cost increase, sewage discharge and so on. Therefore, for the workpieces processed or unprocessed after painting, oil-free anti weld spatter coating should be selected during welding, and water-borne or powder anti weld spatter coating should be used.

Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in China and rest of the world. Applicable for flash-over & algae prevention, our well-formulated anti algae coating and anti fouling coating are acknowledged for offering lasting sterilization and inhibition for mold, bacteria, yeast and other microorganisms. Avail them from us in desired quantity and packaging at guaranteed reasonable prices.

The Advantages of Anti algae coating & Anti-fouling (RTV-ZB):

1. Ready-to-use without adding solvent to make thinning or excassive mixing/shanking before use. Easy to use in different conditions.
2. Excellent anti algae paintand anti-fouling, long-term resistance to weathering and a wide variety of pollution environments.
3. Long-term hydrophobicity, Suppression of leakage current, discharges and pollution flashover.
4. Reduced maintenance and revenue losses, easy to maintain as in washing, compared to conventional insulator surfaces.
5. Strong adhesion to the insulator surface, withstand high pressure.
6. The service life is longer than normal RTV coating, at least 15 years in most service conditions. Stable operation, long-lasting performance.
7. Nontoxic and environmental friendly material.

Application Scope of algae resistant paint & Anti-fouling Coating (RTV-ZB):

1. RTV-II is ideal Suited for used in a wide variety of pollution environments including, but not limited to, salt spray, salt fog, industrial (cement dust, fly ash, carbon black, acid emissions, etc.) and desert sand.
2. AC and DC systems, all voltage levels.
3. Our RTV-ZB Silicone Rubber Coating can effectively protect ceramic insulator, glass insulator, long rod insulator, circuit transformer, voltage transformer, bushing, circuit breaker, Hollow porcelain insulator, porcelain surge arrest, switchgear cabinet, Transformer insulator and other outdoor electrical equipment.

Product Standard of Anti-Algae & Anti-Fouling Coating (RTV-ZB):

DL/T 627-2012 Room Temperature Vulcanized Silicone Rubber Anti-Pollution Coating for Insulators

IEEE 1523 IEEE Guide for Application, Maintenance, and Evaluation of Room Temperature Vulcanized (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators

Contact us get more details about RTV-ZB Silicone Rubber Coating, such as TDS, Application Method, OEM etc.

We can supply different color of RTV-ZB Coating, such as RED, GRAY, WHITE and other color, also customer required.