Blogs/News/PSAs

What is the cause of the sweltering in the workshop?

1. The plant is too high to install air conditioners;
2. The workshop space is too large, and the general refrigeration equipment can’t meet the requirements;
3. Machine heating, etc.

As far as the use of the big air industrial ceiling fan itself is concerned, the fan with a large fan blade generally has a large electric power and consumes a large amount of electric energy. The power consumption of the electric fan is proportional to the rotational speed of the fan blade. For example, a large industrial ceiling fan of 400 mm consumes 60 W when using a quick gear. When it uses slow gear, it consumes only 40W. The fastest power of the same electric fan is 40% different from the power consumption of the slowest gear. Therefore, usually open the fast gear first, and then use the slow gear after cooling down, you can reduce the power consumption of the industrial ceiling fan. When the air volume meets the requirements for use, try to use the middle or slow gear.

The fan blades of big air industrial ceiling fans are made of aerospace aluminum alloy. The blade connection and the hub connection are required to have sufficient strength and structural safety. It is a protective measure to prevent the blade from being up, down and broken! The industrial ceiling fan is directly fixed on the steel beam of the roof structure, without welding and processing, and does not affect the structure of the building itself. The speed is lower than 60 rpm, and the air volume is over 10,000 cubic meters per minute! Most importantly, it consumes up to 1.5 kWh per hour. It saves money!

The big air industrial ceiling fans that are energy-saving, environmentally friendly, and practical are the most demanding users and markets, but the most basic is to meet the requirements in terms of quality. If the user can purchase  the big air industrial ceiling fans of the factory direct sales, it will be more secure in quality and the first-hand source can save more cost.