Metal and you know when you get kind of lighter when it comes to stabilization. It's not quite as stable versus something heavier but the nice thing is it does a really good job and it's made for smaller lighter cameras it's just really easy to set up. Except for the quick-release plate that's also on another quick-release plate so this plate just walks into the other plate and you can just take this off disconnect the USB cable but the motor and everything will stay on this little a smaller release plate. You can just click it in here when you're done.
If you want to click it back in you just lock it down boom so the layout on. Zhiyun Weebill LAB is a little bit different than some of the other gimbals right now, if you want to go into follow mode you have to push in the trigger on the front and then go into follow mode than on the side you can switch down to L which is lock mode which means the gimbal will just keep the camera in the same spot then you can click POV which puts it into a follow mode which follows the roll axis as well or you can put it into V which is kind of like the vortex mode which you can do those cool vortex shots or the inception mode.
There's a new firmware and you can triple-click the LV button and it'll actually lock out all the buttons in case you click them by accident, you should just triple-click again and then you can resume using your buttons one of the new features that Zhiyun is putting into there gimbals is the wireless image transmission this one doesn't have HDMI but you can still do it through the USB with different cameras with the Sony it works and basically plug USB into the camera and then plug the USB into the back of the gimbal here and it will transmit your image to your phones through its own Wi-Fi connection and from there you can actually change your camera settings and the gimbal settings and everything just off your phone.
If you are interested in gimbal, welcome to www.zhiyun-tech.com .
Comments