The production system of Mining Industry is a complex system composed of many links.
In blast hole drill bits and coal mining drill bits , complicated geological and hydrologic conditions, thick alluvium of topsoil, many quicksand layers, large water inflow, large well diameter, deep wellbore, and often concentrated operation scale, as well as high temperature, high pressure and high formation stress in the deep well, will greatly aggravate the severity of underground complexity and the difficulty of treatment.
Some problems should be solved according to the characteristics of coal mine drilling:
The problem of increasing drilling speed
Prevention and treatment of well collapse, diameter reduction, drilling drop and other accidents.
Anti-deviation technology.
High temperature resistance。
Problems of cutting tools in deep well construction.
Therefore, it is necessary to perfect the structure of the large-diameter bit.With the increase of drilling fluid density and well depth, the fluid column pressure exerts a pressure holding effect on the broken cuttings at the bottom of the well, and the broken cuttings from the cone bit are not easy to leave the bottom of the well under the action of differential pressure, resulting in the formation of a cushion at the bottom of the well, reducing the crushing efficiency, etc. Reasonable bit structure will speed up the flow of cuttings in the bottom hole, improve the crushing efficiency, accelerate the drilling speed and shorten the drilling cycle.
As well as improving the life of the roller bit, the service life of the roller has a great impact on the construction cost of drilling well. The life of the roller bit mainly depends on the life of seal, bearing and parent.
GREAT Mining tricone bit is utilized for blasting hole open pit mining. Depending on the different formations of customers, mining drill bit manufacturers can offer different product and types of drill bits used in mining,the sizes ranged from 6 3/4" to 16".
Mining tricone bit, we recommend 532、632、642、722 etc.
Comments