🌏 Blogs / Articles / News / Classifieds / Press Releases / PSA / Podcast / Poetry / Storytelling

 

Introducing Gate Drivers in Power Electronics

A gate driver serves as a robust power amplifier, taking in a low-power input from a controller IC and translating it into the necessary high current gate drive for a power device. As demands in power electronics escalate, the design and efficacy of gate driver circuitry become increasingly crucial.

At the core of modern power electronics systems lie power semiconductor devices. These systems employ a variety of gated semiconductor devices—such as standard transistors, FETs, BJTs, MOSFETs, and IGBTs—as switching elements in applications like switched-mode power supplies (SMPS), universal power supplies (UPS), and motor drives. The advancement of power electronics technology typically mirrors the progression of power semiconductor devices.

Within the power electronics industry, there's a continuous rise in power level requirements and switching frequencies. Among the myriad semiconductor devices available, the metal oxide semiconductor field effect transistor (MOSFET) and the insulated gate bipolar transistor (IGBT) stand out as two of the most favored and efficient options for medium to high power switching in various applications.
 
mosfet ibgt symbols
 
The gate serves as the electrically isolated control terminal for both MOSFETs and IGBTs, distinguishing them from their other terminals, which are either the source and drain or the emitter and collector. To activate a MOSFET or IGBT, a voltage is typically applied to the gate relative to the source or emitter. In order to induce conduction in these switching devices, the gate terminal must be positively charged in relation to its source or emitter.
 
The behavior of power devices during switching is influenced by the parasitic capacitances among the three terminals: gate-to-source (Cgs), gate-to-drain (Cgd), and drain-to-source (Cds). These capacitances are typically non-linear and vary with bias voltage. Charging the gate capacitor turns the power device ON, allowing current flow between its drain and source terminals. Discharging it, on the other hand, turns the device OFF, blocking a significant voltage across the drain and source terminals.
 
The gate voltage of a power device remains unchanged until its gate input capacitance is charged, and the device doesn't transition to the ON state until its gate voltage surpasses the gate threshold voltage (Vth). Vth denotes the minimum gate bias necessary to establish a conduction path between the device's source and drain regions. To operate a power device as a switch, a voltage considerably higher than Vth must be applied between the gate and source or emitter terminal.
 

Gate Drivers for Power Electronics

 
In high-power applications, it's impractical to directly drive the gate of a power switch with the output of a logic IC (such as a PWM controller). The limited current capabilities of these logic outputs mean that charging the gate capacitance would take an excessive amount of time, likely longer than the duration of a switching period. Consequently, dedicated drivers are essential to apply voltage and supply drive current to the power device's gate. This driver circuit can take various forms, including dedicated ICs, discrete transistors, or transformers. Alternatively, it may be integrated within a PWM controller IC.

A gate driver functions as a power amplifier, receiving a low-power input from a controller IC and generating the necessary high-current gate drive for a power device. It's utilized when a PWM controller lacks the output current required to drive the gate capacitance of the associated power device.
 
generalized layout of power electronic system
 
The gate driver circuit plays a vital role within power electronics systems, serving as a crucial interface between high-power electronics and control circuits. Its primary function is to drive power semiconductor devices effectively. The performance of gate driver circuits significantly influences the output of DC-DC converters or SMPS. If the gate driver circuit fails to properly drive the power device's gate, the output of the DC-DC converter will deviate from the intended design specifications. Consequently, meticulous attention to the design of gate driver circuits is imperative in the development of power electronic converters.
 
Click here to read the original article.
Votes: 0
E-mail me when people leave their comments –

You need to be a member of Hey Papi Promotions Network to add comments!

Join Hey Papi Promotions Network

🔥Christian Music News