Medical connectors are connector products used in the medical field. The product quality of medical connectors should be strictly checked, and it is the responsibility of each factory to do the testing of medical connectors.
The detection method of medical connectors is basically the same as that of ordinary connectors, mainly involving twelve aspects:
- Plug-in force test
Fully insert or pull out the connector at the specified rate, and record the corresponding force value.
Check whether the insertion force of the medical connector meets product specifications.
- Durability test
Continue to insert and remove the connector at the specified rate until the specified number of times.
Detect the impact of repeated insertion and removal on medical connectors, and simulate the insertion and removal of connectors in actual use.
- Hot and cold shock test
Evaluate the impact value of the connector on its functional quality under rapid large-scale changes.
- Withstand voltage test
Apply a specified voltage between the connector contact and the contact, and between the contact and the housing for a specified time, and observe whether the sample has a breakdown or discharge phenomenon.
Verify whether the connector can work safely at the rated voltage and whether it can withstand the potential of overpotential, so as to assess whether the insulation material or insulation gap of the connector is appropriate.
- Contact resistance test
By passing a prescribed current to the connector, the voltage drop across the connector is measured to obtain the resistance value.
Verify the resistance value generated when current flows through the contact surface of the contact.
- Vibration test
Verify the impact of vibration on the performance of the electrical connector and its components. The types of vibration are random vibration and sinusoidal vibration.
- Mechanical shock test
Verify the impact resistance of the connector and its components or assess whether its structure is firm. Test waveforms: half-sine wave, square wave.
- Insulation resistance test
A voltage is applied to the insulated part of the connector, so that a leakage current is generated on the surface or inside of the insulated part to show the resistance.
Verify whether the insulation performance of the connector meets the requirements of the circuit design or is subjected to environmental stress such as high temperature and humidity, and whether its resistance value meets the requirements of the relevant technical conditions.
- Salt spray test
Evaluate the resistance of connectors, terminals, and coatings to corrosion by salt spray.
- High temperature test
Evaluate whether the performance of the terminal and insulator changes after the connector is exposed to a high temperature environment for a specified period of time.
- Temperature and humidity combined cycle test
Evaluate the impact of the connector on the performance of the connector after storage in a high temperature and high humidity environment.
- Mixed gas corrosion test
Evaluate the corrosion resistance of connectors exposed to different concentrations of mixed gases and the impact on their performance.
Sunkye supports medical grade connectors for a complete range of high-performance applications. A wide variety of military connector options are available to you, feel free to contact us.
Popular Searches
automotive power connectors right angle connector Mil spec connector military grade connectors pcb connector micro d connector aerospace connectors custom connector manufacturer waterproof connectors nano connectors
Explore Our Industry & Solution
Oil & Gas & Marine
Oil & Gas & Marine
Medical and Healthcare
Medical and Healthcare
Military / Defense
Military / Defense
Automotive
Automotive
Aerospace
Aerospace
Aircraft / UAV
Aircraft / UAV
Custom Connector
Custom Connector
Automation and Control
Automation and Control
Sunkye Connection Technologies provides a wide product portfolio with a complete interconnect solutions offering. Sunkye connectors and cables assemblies are complementary with Sunkye backshells and conduits.
YOU MAY BE INTERESTED IN
Download Center
download
YOU MAY BE INTERESTED IN
Connector Technology
Connector Technology
Related News
The Significance of Gold-plated Interface to Connector
Mar 02, 2020
The Significance of Gold-plated Interface to Connector
Sunkye Super Pin Datasheet
Jun 25, 2019
Sunkye Super Pin Datasheet
Polytetrafluoroethylene-PTFE
Sep 06, 2019
Polytetrafluoroethylene-PTFE
D-sub connectors are bulky and durable, which made them suitable for being applied in harsh environments where durability is extremely important. They can also be compatible with many old-fashioned devices. For these advantages, D-sub is widely used in factories, manufacturing workshops and industrial environments.
Comments