Many manufacturers of steel bar hoops need to use the Many manufacturers who process the stirrup bending need to use the stirrups bending machine. For those newcomers who have just come into contact with this device, it will take some time to use it well veritably in the face of such a complicated device. So how to quickly master the operation of the steel bending machine as a novice? First of all, from the work assignments that go to work after work, we must pay attention to the matters and measures at the time of handover. After careful trial operation, only if there is no abnormal situation that can be processed. There should be no obstacles in the operation site and the swinging range of the hoisting arm. The dangerous area should be demarcated, no idlers should be allowed to enter, and the guards should be sent. The slewing sirens, rearview mirrors and side mirrors should be intact, and the turret guardrails should be intact.
Secondly, the ground of work site should be selected as solid as possible. When working on the soft ground, the board should be covered with wooden boards or sleepers under the legs. The crawler crane should be padded with sleepers to prevent from sinking. Do not move during the process, the wheels must be taken care not to slip.
In particular, it should be noted that the coolant of the stirrup bending machine should not be replaced with fresh water. With the temperature rising again gradually, some guys find that the coolant in the water tank is insufficient, and they just refill it with fresh water randomly. At this time, the car antifreeze is not the subject, but the water is easy to produce water alkali, water rust, and the boiling point is low, which is easy to cause "opening." Therefore, the coolant cannot be exchanged for clean water at will. At the same time, when changing the coolant, check whether the left and right drainage holes are blocked, so as to prevent the rainwater from being discharged after the rain, and pour into the vehicle.
The above points are to help the novices quickly master the operation of the steel bending machine, hope that everyone can read it carefully.
At TJK MACHINERY, innovation focuses on customer needs. Our strength lies in offering more suitable, more flexible and more competitive solutions for the customers all over the world in time.
Comments