Many amusement park ride showman do not know much about the differences between amusement E10 bulbs and amusement E14 bulbs when purchasing decorative LED lights, the type of lamp holders for the lamps, and whether special features are required. The following is a summary by aglare lighting on amusement lights E14 and E10 bulbs - what is the difference?
The main difference between amusement E10 and amusement E14 bulbs is their lamp holder size and applicable scenarios, as follows:
1. Amusement light E14 and E10 bulbs holder size:
•E14: The lamp holder has a diameter of 14 mm, which is larger than E10 and is a more commonly used lamp holder type, suitable for a wider range of lamps, including home lighting, decorative lamps, chandeliers, etc.
•E10: The lamp holder has a diameter of 10 mm and is a smaller lamp holder type, commonly used in small lamps or decorative lamps.
2. Applicable scenarios:
• Amusement E10 bulbs: Usually used for decorative lighting of small entertainment equipment such as amusement facilities, carousels, flying squirrels, etc., due to their small size, they are more suitable for small spaces or occasions that require fine decoration.
• Amusement E14 bulbs: Also suitable for amusement facilities, but due to the larger lamp head, they may be more common in occasions that require stronger lighting or larger lamps, such as decorative lighting of large amusement equipment and amusement parks.
3. Power and brightness:
• Due to their smaller lamp heads, E10 bulbs usually have lower power and relatively lower brightness, which is suitable for lighting scenes with low power requirements.
• E14 bulbs can support higher power, so the brightness and luminous range may be larger, which is suitable for lighting needs that require higher brightness or a larger irradiation area.
4. Installation compatibility:
• E10 and E14 bulbs can only be installed on lamps or lamp holders of corresponding lamp head sizes, respectively, and cannot be used interchangeably. Ensuring that the bulb matches the lamp holder is an important consideration during installation.
Comments