Description of 12 Inch Butterfly Valve:
Most of ZECO 12 butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operation speed, neither too fast nor too slow, and exert force at proper position. End position is vital important to valve performance. In Close position, ball shall be at right position to seat. The closure parts of the valve seat so close to the campaign and leave the valve seat, the valve sealing performance depends in part on the relative pieces of stem-driven closure of the valve seat to remain sealed and the resulting mechanical force. If the role of a particular incident in the direction of the closure of the closure of the pressure to close the case up from the seat, and that this power is essential. Most of the internal closure of the sliding piece in the valve seat does not rely on force stem seals, but this type of valve position to close the right thing or not is very important. In some cases, when the closure parts close to the final closed position, the driving force needed to close the case may be greatly increased, to reach the required position has been shut down parts of an auxiliary compression. Close cases are not accessible or not stopped in the customs location will have a seal leak and damage. Butterfly Valves requires right position to guarantee sealing. When the indicator shows Close position, movement shall be stopped. If you want to know the 12 inch butterfly valve price, please contact us.
Features of 12 Inch Butterfly Valve:
- ZECO 12 inch butterfly valve has no dead zone design;
- ZECO 12 inch butterfly valve has live loaded packing system design;
- ZECO 12 inch butterfly valve has fire protection structure design;
- ZECO 12 inch butterfly valve has double safety sealing design.
Material of 12 Inch Butterfly Valve:
No | Part | Material |
1 | Body | ASTM A216 WCB + 13Cr |
2 | Seal Ring | Graphite + SS304 |
3 | Retainer Flange | ASTM A105 |
4 | Pin | ASTM A276 410 |
5 | Disc | ASTM A216 WCB |
6 | Stem | ASTM A276 410 |
7 | Stem Packing | Graphite |
8 | Stem Beating | SS304 + PTFE |
9 | Bolt | ASTM A193 B7 |
10 | Nut | ASTM A194 2H |
11 | Yoke | ASTM A216 WCB |
The gate valve needs regular maintenance due to the large wear of the valve seat
As a industrial Valve manufacturer, ZECO always adhere to exceed customer expectations, to provide customers with more value-added
services and products as the ultimate goal.
ZECO valve group co ltd was established in year 1991. We are located in Shanghai, Yancheng and Wenzhou with total building area 102000㎡. Till now, we have expanded into a group with 8 holding companies(including 5 production bases), sales offices and sales agents. Mainly manufacturing forged ball valve, casting ball valve, wedge gate valve, through conduit gate valve, globe valve, dual plate check valve, swing check valve & forged steel valve.
Comments